Before I start, my system is running Mandrake 10.1 Official (download
edition) as the secondary OS, Windoze XP as the primary (both OS are on
different harddrive).
Recently, I had to change my sound card and the only one I could find
before Christmas was a SoundBlaster Live! 24 bits. As Windows
Albert Charron wrote:
Before I start, my system is running Mandrake 10.1 Official (download
edition) as the secondary OS, Windoze XP as the primary (both OS are on
different harddrive).
Recently, I had to change my sound card and the only one I could find
before Christmas was a SoundBlaster Live!
On Thursday 09 December 2004 17:19, Rick Kunath wrote:
Dan Gordon wrote:
I am using the live value as it was called from about 6 or 7
years ago without any problems.
I have that same card in another machine and it's based on the emu10k
chipset. It works great.
As far as i know the live
Does anyone have the Creative labs SoundBlaster Live! 24-bit card
running in Mandrake 10.1 under alsa?
The Mandrake supported hardware matrix has model numbers that don't seem
to correspond to any model numbers on the Creative web site.
I am in the market for a new low-end sound card and
On Thursday 09 December 2004 09:52 am, Rick Kunath wrote:
Does anyone have the Creative labs SoundBlaster Live! 24-bit card
running in Mandrake 10.1 under alsa?
The Mandrake supported hardware matrix has model numbers that don't
seem to correspond to any model numbers on the Creative web
Dan Gordon wrote:
I am using the live value as it was called from about 6 or 7 years
ago without any problems.
I have that same card in another machine and it's based on the emu10k
chipset. It works great.
As far as i know the live cards should work
without problems under 10.1 Aside from
Hi again folks,
I'm setting up a new machine running LM9.0 that I'm planning on using as an
MP3 server for my stereo system.
The machine (a Dell Optiplex GX1) has on-board sound (ISA), which output very
low sound levels and I'm afraid might not have very good fidelity, so I
disabled it in
On Sun, 27 Oct 2002 11:04:30 -0800
David Johnson [EMAIL PROTECTED] wrote:
Both HardDrake and sndconfig see the card, but report that it is
unsupported.
What is the exact card?
Unless it is an ISA use draksound Not sndconfig.
sndconfig is a holdover to be used only for ISA cards which are not
Charles,
It is a PCI card. A standard SBLive card.
lspcidrake -v reports the following with regard to the card:
snd-emu10k1 : Creative Labs|SB Live! (audio) [MULTIMEDIA_AUDIO]
(vendor:1102 device:0002 subv:1102 subd:8022).
That being said, I'm unsure how to change the drivers that are
Alan,
Interesting! Do you dual boot with Windows? Has disabling plug and
play OS in the bios affected Windows?
Thanks,
Randy Kramer
Alan Rolfe wrote:
My Sound Blaster Live! Value didn't work at first and no matter what I
tried it just refused.
My problem was simple however... I had plug
yes I do Dual Boot my machine and it works fine in Windoze...
On Wed, 16 May 2001 08:07:23 -0400 Randy Kramer ([EMAIL PROTECTED])
wrote:
Alan,
Interesting! Do you dual boot with Windows? Has disabling plug and
play OS in the bios affected Windows?
Thanks,
Randy Kramer
Alan Rolfe wrote:
My
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Alan Rolfe
Sent: Wednesday, May 16, 2001 9:23 AM
To: Randy Kramer
Cc: [EMAIL PROTECTED]
Subject: Re: Re: [newbie] SoundBlaster Live! Value in LM 8
yes I do Dual Boot my machine and it works fine
: Re: Re: [newbie] SoundBlaster Live! Value in LM 8
yes I do Dual Boot my machine and it works fine in Windoze...
On Wed, 16 May 2001 08:07:23 -0400 Randy Kramer ([EMAIL PROTECTED])
wrote:
Alan,
Interesting! Do you dual boot with Windows? Has disabling plug and
play OS in the bios affected
Okay, I know this has been asked a million times, but here goes: How do I
get my SoundBlaster Live! Value card working in Mandrake 8? I've searched
the archives and numerous very helpful web pages, but there's got to be a
simpler, better way to get this working.
Running HardDrake (aka
Try checking your CD out volume in kmix - sometimes it defaults to zero.
cheers,
philomena
At 04:44 PM 5/15/01 -0500, Alexander Rhoads wrote:
Okay, I know this has been asked a million times, but here goes: How do I
get my SoundBlaster Live! Value card working in Mandrake 8? I've searched
the
My Sound Blaster Live! Value didn't work at first and no matter what I
tried it just refused.
My problem was simple however... I had plug and play OS set to YES
in my bios. I set it to NO and it worked first time on the next
boot-up.
On Tue, 15 May 2001 16:44:29 -0500 Alexander Rhoads
([EMAIL
Hi all,
I have just installed Mandrake7.2 and met the following problem: my
souncard (Soundblaster Live!) is detected properly both by HardDrake or
Sndconfig, but it does not work and I got the following messages during
the sndconfig test:
Hi Olivier. I have the Sound Blaster Live 512 pci card. I worked fine upon
initial install of MAndrake 7.1 but when I re-compile the kernel I lose the
card. I get an error loading module emu10k1 upn boot. I found info on how to
get the card to work on LinuxNewbie.org. Look in the NHF's for
On Sunday 11 March 2001 07:43, you wrote:
Hi all,
I have just installed Mandrake7.2 and met the following problem: my
souncard (Soundblaster Live!) is detected properly both by HardDrake or
Sndconfig, but it does not work and I got the following messages during
the sndconfig test:
I've seen a lot of traffic on the list about SoundBlaster live soundcards
and wonder if anyone has one working on the Mandrake 7.2 distro. I am
thinking of buying the card to replace a cheapo in my system. Any Thoughts or
advice on this? Thanks,
--
Dennis M.
Registered Linux user #180842
same here. works like a charm
Cheers,
Chris Kelly
Linux user #185775
-Original Message-
From: Philomena [mailto:[EMAIL PROTECTED]]
Sent: Friday, January 05, 2001 9:39 AM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] soundblaster live
Yes, I have an SBLive! card, and the 7.2 distro
, January 05, 2001 9:39 AM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] soundblaster live
Yes, I have an SBLive! card, and the 7.2 distro is the first one that
worked right out of the box for me - had lots of problems with 7.1, but no
issues at all with 7.2.
Cheers,
Philomena
At 06
, Christopher wrote:
same here. works like a charm
Cheers,
Chris Kelly
Linux user #185775
-Original Message-
From: Philomena [mailto:[EMAIL PROTECTED]]
Sent: Friday, January 05, 2001 9:39 AM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] soundblaster live
Yes, I have an SBLive
Everything that I've ever tried with this thing works like a dream!
Including MIDI
-Original Message-
From: Vic [mailto:[EMAIL PROTECTED]]
Sent: Friday, January 05, 2001 1:20 PM
To: [EMAIL PROTECTED]
Subject: RE: [newbie] soundblaster live
Hey Kelly do you have full midi chip
:[EMAIL PROTECTED]]
Sent: Friday, January 05, 2001 1:20 PM
To: [EMAIL PROTECTED]
Subject: RE: [newbie] soundblaster live
"Kelly, Christopher" wrote:
Everything that I've ever tried with this thing works like a dream!
Including MIDI
Really? I've got the SB Xgamer Live! card, and according to various groups
(like the Exult team) SB Live! cards -don't- support certain things. For
example, do a:
cat /dev/sndstat
Default sound volume is extremely LOW, try raising the volume in the Mixer
panel, and make sure your speakers are turned on/up.
HTH
Jaguar
Stan Wilburn [EMAIL PROTECTED] wrote:
I have tried all of these things...the files appear to be playing on the
player themselves but no sound comes out of
I have a Soundblaster Live sound card that is recognized by Mandrake 7.1
and appears to be installed (it loads the EMU10K1 module or driver) but it
does not work. Any suggestions? Thanks...
Stan "The Crippler" Wilburn
Mid-Range Systems Engineer
Rock Hill Telephone Company
803-323-6366
On Mon, 28 Aug 2000, Stan Wilburn wrote:
I have a Soundblaster Live sound card that is recognized by Mandrake 7.1
and appears to be installed (it loads the EMU10K1 module or driver) but it
does not work. Any suggestions? Thanks...
How do you know it does not work?
Did you try to "play
I have tried all of these things...the files appear to be playing on the
player themselves but no sound comes out of the speakers...this setup does
work in Windows, however, so speakers are turned on...
At 05:32 PM 8/28/00 +0100, you wrote:
On Mon, 28 Aug 2000, Stan Wilburn wrote:
I have a
Try this. As root type:
cd /dev
./MAKEDEV -v audio
If that doesn't work try running sndconfig to reconfigure the card...
-Chris
On Thu, 17 Aug 2000, you wrote:
I have installed Mandrake 7.1 in a dual boot configuration on a Gateway computer
running a 550 MHz P3. The sound card I have is a
I have installed Mandrake 7.1 in a dual boot configuration on a Gateway computer
running a 550 MHz P3. The sound card I have is a SoundBlaster Live! There is some
incompatiblity between what windows wants and what Linux wants. Windows seems to need
the digital output and Linux seems to need
You could try downloading the latest verison of HardDrake - it will require a an
updated kernel, alsa, (both from the Mandrake update site) and and a few other
packages - I also got the latest version of the emu10k1 driver from creative labs -
after I did that, the card worked like a charm.
I have recently installed Mandrake 7.1 and my sound doesn't work. I previously had Mandrake 7.0 and the sound worked fine. Any ideas?Do You Yahoo!?
Get Yahoo! Mail - Free email you can access from anywhere!
I would just like to say thanks to all the people who responded. My sound is working great now.Do You Yahoo!?
Get Yahoo! Mail - Free email you can access from anywhere!
ny problem here.
Good luck to you.
Dennis/sg
- Original Message -
From: John Arkoulis [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, 10 July, 2000 11:44 AM
Subject: Re: [newbie] Soundblaster Live
Hey Dennis . You got me confused.
What is coppermine and what do you mean patch i
SBLive don't work well with
Coppermine.
You need to patch it.
Dennis/sg
- Original Message -
From:
Mike Koceja
To: [EMAIL PROTECTED]
Sent: Sunday, 09 July, 2000 4:37 AM
Subject: Re: [newbie] Soundblaster
Live
No i didn't have to do anything. I just
This is so weird. So many people have had problems with the SB Live
cards. I've got one, and it worked out of the box with both 7.0 and 7.1.
Only problems I've ever had (with both) is that I can't get music (sound
fx is fine) with Doom or Heretic.
Am I just lucky? ;-)
--
"Ronald J. Hall" wrote:
This is so weird. So many people have had problems with the SB Live
cards. I've got one, and it worked out of the box with both 7.0 and 7.1.
Only problems I've ever had (with both) is that I can't get music (sound
fx is fine) with Doom or Heretic.
Am I just lucky?
"Ronald J. Hall" wrote:
This is so weird. So many people have had problems with the SB Live
cards. I've got one, and it worked out of the box with both 7.0 and 7.1.
Only problems I've ever had (with both) is that I can't get music (sound
fx is fine) with Doom or Heretic.
Am I just
- Original Message -
From: Mike Koceja
To: [EMAIL PROTECTED]
Sent: Sunday, 09 July, 2000 4:37 AM
Subject: Re: [newbie] Soundblaster Live
No i didn't have to do anything. I just installed 7.0 and I had sound.
Man I would hate to have to give up on it all together
I have just installed mandrake 7.1 and my sound doesn't work. I had 7.0 and my soound worked just fine any ideas?Do You Yahoo!?
Get Yahoo! Mail - Free email you can access from anywhere!
yeah
run sndconfig in the terminal. It should work.
-Original Message-From: Mike Koceja
[mailto:[EMAIL PROTECTED]]Sent: Saturday, July 08, 2000
1158To: [EMAIL PROTECTED]Subject: [newbie]
Soundblaster LiveI have just installed mandrake 7.1 and
my sound doesn't work. I had
Sorry but i am as about green as they come when it comes to linux. Are you refering to the hardconfig in drakeconfig? If so I have and it failed. Are you referring to something else?
Jim Dwyer [EMAIL PROTECTED] wrote:
yeah run sndconfig in the terminal. It should work.
-Original
On Sat, 8 Jul 2000, Mike Koceja wrote:
I have just installed mandrake 7.1 and my sound doesn't work. I had 7.0
and my soound worked just fine any ideas?
Did you have to do a special trick to get it to work in 7.0? If so, do
that trick again for 7.1.
Paul
--
The deepest truth cannot be spoken
No i didn't have to do anything. I just installed 7.0 and I had sound.
Man I would hate to have to give up on it all together.
Paul [EMAIL PROTECTED] wrote:
On Sat, 8 Jul 2000, Mike Koceja wrote:I have just installed mandrake 7.1 and my sound doesn't work. I had 7.0and my soound worked just fine
Subject: RE: [newbie]
Soundblaster Live
Sorry but i am as about green as they
come when it comes to linux. Are you refering to the hardconfig in
drakeconfig? If so I have and it failed. Are you referring to something
else?
Jim Dwyer [EMAIL PROTECTED] wrote:
yeah run sndco
ok now i know what you are talking about i just checked my second computer
out the one that has SBLive on it and if i go to the Drake Hard Config i get
no reading on my card but it does work and this is how to get it to work go
to your desk top control panel and click on the sound button and you
Does anyone use the SoundBlaster Live! card with
Mandrake 7.0?
Thanks,
Dan
Dan wrote:
Does
anyone use the SoundBlaster Live! card with Mandrake 7.0?Thanks,
Dan
I have the SB Live on my mandrake 7.0 and the install found it and set
it up for me just fine...
Harold Hartley wrote:
Dan wrote:
Does
anyone use the SoundBlaster Live! card with Mandrake 7.0?
Thanks,
Dan
I have the SB Live on my mandrake 7.0 and the install found it and set
it up for me just fine...
Thank
You
Yes, I do. No problems with it whatsoever. Only a small issue when recompiling
the kernel, but it had an easy workaround.
On Mar 29 Dan wrote:
Does anyone use the SoundBlaster Live! card with Mandrake 7.0?
Thanks,
Dan
--
Rial Juan
Well, it worked here (Mandrake 7.0-2). That is... Untill I recompiled the
kernel. For some reason even the original source from the creative-site didn't
work (unresolved symbols). I had to resort to compiling a standard 2.2.14-kernel
from www.kernel.org instead of the secure kernel shipped with
ednesday, December 01, 1999 21:14
To: [EMAIL PROTECTED]
Subject: [newbie] Soundblaster Live! Mini How-To
I have noticed a lot of people from newsgroups, mailing list, and irc
channels have had trouble installing there Soundblaster Live for use
under linux. Since this my be your problem and this a
On Fri, 03 Dec 1999, you wrote:
So I decide to keep updating stuff. I ran the Updates feature on the KDE
desktop. So I run it and it finds about 10 updates. So I figure what the
hell and run the update. Now one of these updates is a new kernel. Not
thinking I downloaded and installed all
I have noticed a lot of people from newsgroups, mailing list, and irc
channels have had trouble installing there Soundblaster Live for use
under linux. Since this my be your problem and this a newbie mailing
list after all. Here is my mini how-to on Soundblaster Live!
Creative Labs currently has
It works just fine. You have to go to
ftp.soundblaster.com/pub/creative/beta/ and download
emu10k1-0.3b.tar.gz.
For 2.2.9-19 use the module for version 2.2.5. If you upgrade to
2.2.9-27 use the module for ver. 2.2.10
Richard
Katie Condon wrote:
Has anybody had experience with the Creative
05:47
To: '[EMAIL PROTECTED]'
Subject: [newbie] Soundblaster Live! and Mandrake
Has anybody had experience with the Creative Blaster
Soundblaster Live!
(Value) and the mandrake-linux kernel 2.2.9-19mdk ?
Katie Condon
[EMAIL PROTECTED]
Someone posted the Creative ftp site where various versions of emu* are
available, one of which works with the 2.2.9 kernel in Venus. Would you
mind reposting? I accidentally deleted the message. Thanks.
/b
-
Barry Marler
Department of Medical Microbiology and Parasitology
You have to go to ftp.soundblaster.com/pub/creative/beta/ and download
emu10k1-0.3b.tar.gz.
For 2.2.9-19 use the module for version 2.2.5. If you upgrade to
2.2.9-27 use the module for ver. 2.2.10
Richard
Barry Marler wrote:
Someone posted the Creative ftp site where various versions of
Katie Condon wrote:
Has anybody had experience with the Creative Blaster Soundblaster Live!
(Value) and the mandrake-linux kernel 2.2.9-19mdk ?
Katie Condon
[EMAIL PROTECTED]
Yes I was having a lot of problem but this page got it working:
http://www.whitem.demon.co.uk/sblive.html
ed
61 matches
Mail list logo
