Op Tue, 23 Jan 2007 18:29:14 +0100 schreef Tony Firshman
<[EMAIL PROTECTED]>:
>> p.s. IPCMOUSE 5 or 6 have no effect sadly, both in the Boot and at the
>> command line !
>
> Who said that?
>
I did. And indeed Tony you should read the manual 8-))
In fact, it is in the SH updates_doc.
IPCMOUSE n;
> Once you have the manual, check that the lead is OK - pinouts are
> there.
>>
>> I need to track down a QUBIDE manual on-line. Once done i
>> shall give it a read.
>>
> It is not on the definitive
> http://dilwynjones.topcities.com/qldocs/qldocs.html
> so I suspect it doesn't exist.
Nice to be d
> Very quick response... you have the normal HUGE bug. When you split
> the
> array into a left and right chunk, you MUST stack the LARGER chunk,
> and
> sort the smaller one. That's why the stack space disappears.
>
> And... be very careful about what happens when you can have
> duplicate
> val
> Which is good but when i do dir cdr1_ i get 'Not implemented', which is
> bad.
>
>You need to set the location of the CD drive with the command:
>CDR_DRIVE 1,1,0
>This sets cdr1_ (1,) to the slave of the 1st ide (,1,), and the 1st CD
>session (,0).
>Check the HDD for documentation on the At
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Roy wood wrote:
> In message <[EMAIL PROTECTED]>, Neil Riley
> <[EMAIL PROTECTED]> writes
>
>> Sorry for the questions, if only there was a "QL systems for Dummies
>> book !"
> This is exactly what the 'Start Here' series in QL Today was aimed at.
>
In message <[EMAIL PROTECTED]>, Neil Riley
<[EMAIL PROTECTED]> writes
>Sorry for the questions, if only there was a "QL systems for Dummies
>book !"
This is exactly what the 'Start Here' series in QL Today was aimed at.
Incidentally, while I mention it, after the next three issues we would
like
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Bob Spelten wrote:
> Op Tue, 23 Jan 2007 17:37:30 +0100 schreef Neil Riley
> <[EMAIL PROTECTED]>:
>
>> Which is good but when i do dir cdr1_ i get 'Not implemented', which is
>> bad.
>>
> You need to set the location of the CD drive with the command
Op Tue, 23 Jan 2007 17:37:30 +0100 schreef Neil Riley
<[EMAIL PROTECTED]>:
> Which is good but when i do dir cdr1_ i get 'Not implemented', which is
> bad.
>
You need to set the location of the CD drive with the command:
CDR_DRIVE 1,1,0
This sets cdr1_ (1,) to the slave of the 1st ide (,1,), and
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Neil Riley wrote:
> It seems i am replying to earlier emails and then yours arrives with
> further details etc. I will remove the LRESPR win1_ipcextuk_bin
> and then refit the RomDisq and reboot.
... with a floppy disk in drive 1.
IPCMOUSE 1 doesn
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Neil Riley wrote:
> p.s. IPCMOUSE 5 or 6 have no effect sadly, both in the Boot and at the
> command line !
Who said that?
The command you need is IPCMOUSE (which is in fact IPCMOUSE 1), assuming
you are connected to the port marked 'mouse' on sH -
Tony,
It seems i am replying to earlier emails and then yours arrives with
further details etc. I will remove the LRESPR win1_ipcextuk_bin
and then refit the RomDisq and reboot. IPCMOUSE 1 doesn't seem to
work and I was told i should use IPCMOUSE 5 or 6 instead which also
doesn't seem to work.
Cheers bob.
I now know why Flp1_ isn't working. I have connected the Floppy cable
to the
'Other' SGC socket, so it is in fact currently Flp3_
I will plus into the other socket tomorrow.
CDROM_bin and ATAPIqub_bin are both on win1_
so I've changed my boot and now get upon startup.
ATAPI extens
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Neil Riley wrote:
> Marcel, I have the previous version of SMSQ/E at home.
>
> Ok, A small but significant update.
>
> Removal of the RomDisq appears to have solved things, or at
> least, moved things forward.
>
> I no longer get stuck on the 'Init
Chaps,
I'm starting to play with the Icon system which is very impressive.
I managed to play with Qroute :-)
Seriously though, I cannot access Flp1_ or for that matter the CD
drive.
Any suggestions would be appreciated.
Neil.
p.s. I may attach my twin ED drives to the SGC as a test.
*
Neil Riley schreef <[EMAIL PROTECTED]>:
> LRESPR win1_ipcextuk_bin
>
This is the SHermes driver, when loaded a prompt should be seen.
Where have you connected your mouse?
Add a line or direct command:
IPCMOUSE n, where n is the serial port for the mouse (5 or 6).
> no mention of the 3.5" DISK DR
Marcel, I have the previous version of SMSQ/E at home.
Ok, A small but significant update.
Removal of the RomDisq appears to have solved things, or at
least, moved things forward.
I no longer get stuck on the 'Initialise' screen, The machine
continues to boot and im left being able to use the k
Neil Riley wrote:
> TF Services RomDisq V2.14 @ 1997 TT
> QUBIDE/REBEL Driver v2.01 @1994-98
> Initialising
There was a bug in SMSQ/E that could cause a hang at this point. I
have fixed it in 3.03, so if you have any earlier version it might be
worth to update.
Marcel
___
Tony Firshman wrote:
> This looks like an issue with the HD boot program.
> Boot up off superHermes floppy and investigate win1_boot.
> Maybe it is trying to run SMSQ?
>
>
It is definitely running SMSQ (though I can't remember which version!) -
you're right though, booting up from a floppy woul
Malcolm
I have noticed on the initial startup screen that whilst the
FUJITSU Hard Drive and the LITE-ON LTN526S CD rom gets
mentioned, there is no mention of the 3.5" DISK DRIVE, Also,
the 3.5" drive light doesn't appear to illuminate at any point during
the startup process even when i slap a d
Neil Riley wrote:
> Hi Guys.
>
>
Hi Neil, I've decided to reply to the list this time so if anything I
say is complete rubbish hopefully it'll be corrected ;)
> First the good news, for those of you who have been helping with my
> Aurora.
> The KVM switch is now working with my Aurora, After f
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Neil Riley wrote:
> Tony,
>
> I have recently obtained this Aurora so your questions are better
> aimed at the previous owner who often frequents this list. Sadly,
> I appear to be a passenger on this ride but of course am keen to
> learn and get th
In message <[EMAIL PROTECTED]>, Neil Riley
<[EMAIL PROTECTED]> writes
>Tony,
>I didn't receive a superHermes floppy so cannot boot the system
>up from it. Regarding the HD and QUDIBE, i want to re-attach the
>(TURBO LED) to QUBIDE so i can see the HD access but I'm not sure
>where to attach the
[EMAIL PROTECTED] wrote:
> OK. So the random order - quicksort marginally outperforms heapsort. For
> the already sorted case, quicksort is rather better than heapsort, but
> its margin goes down as the count goes up. However, with the data all
> the same... ooopppsss my quicksort has fall
Tony,
I have recently obtained this Aurora so your questions are better
aimed at the previous owner who often frequents this list. Sadly,
I appear to be a passenger on this ride but of course am keen to
learn and get this machine up and running ( i have plans for it).
My knowledge though is dire
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Neil Riley wrote:
> First the good news, for those of you who have been helping with my
> Aurora.
> The KVM switch is now working with my Aurora, After fitting a keyboard
> PS2 to DIN
> and PS2 to Serial mouse connector the KVM happily switches betw
Hi Guys.
First the good news, for those of you who have been helping with my
Aurora.
The KVM switch is now working with my Aurora, After fitting a keyboard
PS2 to DIN
and PS2 to Serial mouse connector the KVM happily switches between PC
and Aurora
and the screen quality is perfect.
Now for the
26 matches
Mail list logo
