Hi Eric,
they told me they couldn't delist my IP because on the website unet.de
was no legal information of the owner.
They need:
1. Servername indicating purpose of the server (mail.unet.de should be ok)
2. ip-address resolving to servername (ptr-record = mail.unet.de)
3. legal info about
Did you contact rx.t-online.de ? I'd be interested in what they say.
On 2/7/2022 12:29 AM, Andreas Galatis wrote:
Hi,
when sending out mails to t-online I get the following message:
Connected to 194.25.134.8 but greeting failed.
Remote host said: 554 IP=85.10.201.91 - A problem occurred. (Ask
Further checking logs,
/var/log/qmail/smtp
*tcpserver: fatal: unable to figure out port number for smtp*
So I run: qmailctlstat
clamd: up (pid 994) 100 seconds
send: up (pid 996) 100 seconds
*smtp: up (pid 1816) 1 seconds*
spamd: up (pid 990) 100 seconds
submission: up (pid 989) 100 seconds
On 12/13/2013 04:17 AM, Linux wrote:
12-13 16:42:29 CHKUSER accepted sender: from
qmailtoaster-list-return-15435-linux=ikf.co...@qmailtoaster.com::
remote mail.qmailtoaster.com:unknown:162.213.42.64 rcpt : sender
accepted
12-13 16:42:29 qmail-smtpd: spf-reject: HELO(mail.qmailtoaster.com) from
-factory-pvt.-ltd.
*From:*Eric Shubert [mailto:e...@shubes.net]
*Sent:* 10 November 2013 08:24
*To:* Amit Dalia
*Subject:* Re: [qmailtoaster] Re: Error installing qmail on COS 6.4
I think there are more recent posts than that regarding COS6.
Please keep replies on list.
Thanks.
--
-Eric 'shubes
: [qmailtoaster] Re: Error installing qmail on COS 6.4
I think there are more recent posts than that regarding COS6.
Please keep replies on list.
Thanks.
--
-Eric 'shubes'
On 11/09/2013 01:02 PM, Amit Dalia wrote:
Installing from below thread:
http://www.mail-archive.com/qmailtoaster-list
On 11/08/2013 10:57 PM, Amit Dalia wrote:
Hi,
Getting below error while installing QMT on COS 6.
Try `/root/rpmbuild/BUILD/vqadmin-2.3.7/missing --help' for more information
configure: WARNING: `missing' script is too old or missing
checking for gawk... gawk
checking whether make sets
On 11/07/2013 08:32 AM, Rajesh M wrote:
Saving to:
`/tmp/qtp-install-sanesecurity.21461/clamav-unofficial-sigs.tar.gz'
100%[==]
2,289 --.-K/s in 0s
2013-11-07
eric
on a close study i noted the following
i had already installed qmailtoaster-plus once earlier a long time ago.
however the files in the folder /opt/qmailtoaster-plus/bin are dated 2010
on my other servers these are dated 2012
also the sanesecurity download on my other servers is from
# yum update qmailtoaster-plus
On 11/07/2013 05:21 PM, Rajesh M wrote:
eric
on a close study i noted the following
i had already installed qmailtoaster-plus once earlier a long time ago.
however the files in the folder /opt/qmailtoaster-plus/bin are dated 2010
on my other servers these are
Thanks eric for you replay,
this output:
cat /var/qmail/control/simcontrol
:clam=yes,spam=yes,spam_hits=12,attach=.mp3:.src:.bat:.pif
cat /etc/tcprules.d/tcp.smtp
127.:allow,RELAYCLIENT=,DKSIGN=/var/qmail/control/domainkeys/%/private
You should have as the 2nd line in tcp.smtp:
:allow,BADMIMETYPE=,BADLOADERTYPE=M,CHKUSER_RCPTLIMIT=50,CHKUSER_WRONGRCPTLIMIT=10,QMAILQUEUE=/var/qmail/bin/simscan,NOP0FCHECK=1
Change it, then run
# service qmail cdb
--
-Eric 'shubes'
On 10/23/2012 12:01 AM, Giuseppe Perna wrote:
Thanks eric
thanks eric, you really are a genius.
now it all works.
where can I find the meaning of these terms?
CHKUSER_**RCPTLIMIT=
CHKUSER_**WRONGRCPTLIMIT
NOP0FCHECK=
thanks
2012/10/23 Eric Shubert e...@shubes.net
You should have as the 2nd line in tcp.smtp:
On 10/23/2012 11:16 AM, Giuseppe Perna wrote:
thanks eric, you really are a genius.
now it all works.
where can I find the meaning of these terms?
CHKUSER___RCPTLIMIT=
CHKUSER___WRONGRCPTLIMIT
NOP0FCHECK=
thanks
CHKUSER is a qmail patch written by our friend Antonio Nati.
Documentation is
Yes, mysql is started.
I solved vpommail creating the database and the user vpopmail.
I then edited the file vpopmail.mysql.
clamad that is now not working.
I tried to send and receive email with virus test eicar but does not block
anything.
but this sceript QTP-newmodel work?
thanks
On 10/22/2012 09:40 AM, Giuseppe Perna wrote:
Yes, mysql is started.
I solved vpommail creating the database and the user vpopmail.
I then edited the file vpopmail.mysql.
clamad that is now not working.
I tried to send and receive email with virus test eicar but does not
block anything.
What
thanks for your replay.
i have upgrade the server with qtp-newmodel.
i read this :
# qmlog -t 50 clamd
10-22 19:19:26 MaxQueue set to: 100
10-22 19:29:26 No stats for Database check - forcing reload
10-22 19:29:26 Reading databases from /usr/share/clamav
10-22 19:29:30 Database correctly reloaded
Looks as though clamd's running ok. Next thing to check would be simscan.
Let's have a look at:
# cat /var/qmail/control/simcontrol
# cat /etc/tcprules.d/tcp.smtp
Have you run service qmail cdb recently?
This needs to be run whenever the above 2 (and a few others) are changed.
--
-Eric
On 10/21/2012 04:33 AM, Giuseppe Perna wrote:
hello,
I installed qmailtoaster with QTP-newmodel, but when I try to add a new
domain I get this error:
Error - no authentication database connection.Initial open.
I verified that the databases in mysql are:
information_schema
mysql
test
there 'the
On 09/05/2012 05:46 AM, qmail wrote:
Hi,
We are using qmail toaster,
OS - CentOS5
Currently we are facing one issue in toaster, We use courier-imap for
the mails.
Problem is courier-imap links are breaking when connection reach maximum
size, This results on MSoutlook and went to offline mode
I don't think it's chkuser, as I see this in my log:
07-26 15:39:49 spamdyke[30727]: ALLOWED from:
bounce-use=m=6670789299=echo7=d3b62e84d9c59197a58d42b0badc7...@returnpath.bluehornet.com
QMT is accepting the message ok. It's the Exchange server that's
complaining about what QMT is sending
On 07/18/2012 11:42 AM, Am Am wrote:
Hi,
error: Failed build dependencies:
vpopmail-toaster = 5.4.17 is needed by
qmail-toaster-1.03-1.3.22.i686
1:qmail-toaster warning: user shubes does not exist - using
root
+
error: File not found by glob:
It does not seem to work.
Here is the result of qtp-whatami :
qtp-whatami v0.3.7 mar mar 22 09:29:34 CET 2011
DISTRO=CentOS
OSVER=5.5
QTARCH=x86_64
QTKERN=2.6.18-194.32.1.el5
BUILD_DIST=cnt5064
BUILD_DIR=/usr/src/redhat
This machine's OS is supported and has been tested
and of rpm -qa | grep
Yes, it appears to be a bad download. You'll need to remove the bad one
manually from the /usr/src/qtp-upgrade/SRPMS/ directory, then rerun
qtp-newmodel.
Jake, if you make md5 (or sha or whatever) files available for the
packages, I'll modify qtp-newmodel to check them and re-download when
On 03/18/2011 10:50 AM, Eric Shubert wrote:
Yes, it appears to be a bad download. You'll need to remove the bad
one manually from the /usr/src/qtp-upgrade/SRPMS/ directory, then
rerun qtp-newmodel.
Jake, if you make md5 (or sha or whatever) files available for the
packages, I'll modify
There could be a problem with your queues. Try running:
Be sure you have the latest qmailtoaster-plus package installed first:
# yum update qmailtoaster-plus.repo
# yum update qmailtoaster-plus
Then run the queue repair tool:
# service qmail stop
# queue_repair.py -r
# service qmail start
That
The latest (2.0.9) chkuser is not in the qmail-toaster package yet. I
know Jake is working on it, but he's been very busy lately. If I had to
guess, I'd say we might see it in the next month or so.
You're certainly welcome to give it a try. I expect that you might need
to modify the patch
Thanks Eric
-Original Message-
From: Eric Shubert [mailto:e...@shubes.net]
Sent: Thursday, September 23, 2010 8:36 PM
To: qmailtoaster-list@qmailtoaster.com
Subject: [qmailtoaster] Re: error
That's not anything critical. Just wait for the new QTP to come out (in
a week or so
Pak Ogah wrote:
On 21-Sep-10 2:47, Noel Rivera (Border Less) wrote:
Hello List In a few days I have this error in my qmail server, any
ideas to solve this problem?
Thanks for your help
@40004c97b94f1d8935ec qmail-smtpd: qq soft reject (mail server
temporarily rejected
Noel Rivera (Border Less) wrote:
The clamav log is clean I have this line in the spamd log
09-20 12:38:49 [16035] info: prefork: server reached --max-children
setting, consider raising it
This is indicative of a server under heavy load, which could also cause
the qq soft reject as a side
To: qmailtoaster-list@qmailtoaster.com
Subject: [qmailtoaster] Re: error
Noel Rivera (Border Less) wrote:
The clamav log is clean I have this line in the spamd log
09-20 12:38:49 [16035] info: prefork: server reached --max-children
setting, consider raising it
This is indicative of a server
Noel Rivera (Border Less) wrote:
Hello List In a few days I have this error in my qmail server, any ideas
to solve this problem?
Thanks for your help
@40004c97b94f1d8935ec qmail-smtpd: qq soft reject (mail server
temporarily rejected message (#4.3.0)): MAILFROM:
Now that I understand a
Noel Rivera (Border Less) wrote:
Hello List In a few days I have this error in my qmail server, any ideas
to solve this problem?
Thanks for your help
@40004c97b94f1d8935ec qmail-smtpd: qq soft reject (mail server
temporarily rejected message (#4.3.0)): MAILFROM:
You haven't given us
Hello Eric thanks for your reply
You haven't given us much to go on Noel, so the best anyone can do is guess.
Do you get this message on every email, or just occasionally?
When I have this error, the message is on every mail
This error can be caused by a number of things. As Jake
...@shubes.net]
Sent: Monday, September 20, 2010 2:11 PM
To: qmailtoaster-list@qmailtoaster.com
Subject: [qmailtoaster] Re: error
Noel Rivera (Border Less) wrote:
Hello List In a few days I have this error in my qmail server, any ideas
to solve this problem?
Thanks for your help
Perhaps we should ask this on the clamav list. Any takers?
--
-Eric 'shubes'
Amit Dalia wrote:
Hi Philip,
Yes I'm getting lot of them but it is 32 bit OS.
Regards,
Amit
At Friday, 20-08-2010 on 2:25 Philip Nix Guru wrote:
On 08/19/2010 09:56 PM, Eric Shubert wrote:
Amit Dalia
Amit Dalia wrote:
Hi Everyone,
I'm getting below error while updating clamAV. What is this exactly?
./llvm/include/llvm/Target/TargetInstrInfo.h:478: warning: unused
parameter 'MI'
./llvm/include/llvm/Target/TargetInstrInfo.h:496: warning: unused
parameter 'Pred1'
Hi Philip,
Yes I'm getting lot of them but it is 32 bit OS.
Regards,
Amit
At Friday, 20-08-2010 on 2:25 Philip Nix Guru wrote:
On 08/19/2010 09:56 PM, Eric Shubert wrote:
Amit Dalia wrote:
Hi Everyone,
I'm getting below error while updating clamAV. What is this exactly?
Malvin Rito wrote:
Hi List,
I'm running my qmailtoaster server for almost a year now, today I've noticed
that email from yesterday 9:30PM-today 8:02 AM was delayed and we just
received it at around 10AM today. When I check the Qmail Toaster Server SEND
log I've seen several errors message
not trying to hijack a thread - but in regards to:
...Outlook is riddled with other problems I'd rather not get into
I would be interested in knowing more regarding outlook and problems..
love to know more -
just curious - thanks!
Eric Shubert wrote:
Amit,
There's a difference between an
Hi Jim,
This will help you up.
http://wiki.qmailtoaster.com/index.php/Outlook_problems_and_possible_solutions
Regards,
Amit
At Monday, 28-06-2010 on 19:12 Jim Shupert wrote:
not trying to hijack a thread - but in regards to:
...Outlook is riddled with other problems I'd rather not get
Hi Eric/Maxwell,
Thanks local DNS solved the problem. Another issue with that client
is the below error:
'ami...@rediffmail.com [1]' on 25/06/2010 05:27 PM
451 DNS temporary failure (#4.5.1 - chkuser)
When there internet is down and if any user send mail to external
domain they immediately
Amit,
There's a difference between an immediate error and a bounce. I think
what you have here is a failure to submit (immediate error), not a
bounce. A bounce would be a message that has been successfully
submitted, but failed to be delivered within a certain time period.
This is an
I don't know how large your network is so adding an entry in the hosts
file may not be an option, but if it's not too much trouble that is
certainly a partial solution if domain/ip's that are being accessed
don't change that frequently. It has some limitations, but if it's all
local intranet it
I don't believe the hosts file will be of any help. There are 2
different ways of resolving names. I don't recall the details, but IIRC
one includes the hosts file and the other doesn't. I expect that chkuser
uses the one that doesn't include hosts, and even if chkuser used the
method that
Of course the caching-nameserver is the best way, but under certain
circumstances I have used the host file successfully for testing. This
however was for web not mail services.
On 06/25/2010 10:49 AM, Eric Shubert wrote:
I don't believe the hosts file will be of any help. There are 2
Hi Eric/Maxwell,
At Wednesday, 23-06-2010 on 21:19 Eric Shubert wrote:
Maxwell Smart wrote:
Wouldn't it be easier to setup a local DNS server for the local
network?
On 06/23/2010 07:17 AM, Amit Dalia wrote:
Hi Everyone,
First of all I'll explain my scenario. My QMT server is placed in
a
Amit Dalia wrote:
There ERP software needs only few things like incoming server,
outgoing server, sender id and receiver id. Now here sender id and
receiver id are from local domain of QMT. But getting error 421
Refused. Your reverse DNS entry does not resolve in their ERP
Thanks Eric,
Will try to check and configure with AD DNS and update you by
tomorrow.
Regards,
Amit
At Wednesday, 23-06-2010 on 22:07 Eric Shubert wrote:
Amit Dalia wrote:
There ERP software needs only few things like incoming server,
outgoing server, sender id and receiver id. Now here
Amit Dalia wrote:
Hi Everyone,
I'm getting below error when I'm restarting qmail.
./run: line 4: /usr/bin/envconv: No such file or directory
Qmail is working fine.
Regards,
Amit
Which run file is it coming from?
# find /var/qmail/supervise -name run -exec grep -H envconf {} \;
Please
Hi Eric,
The command you mentioned doesn't give any output. Also I noticed if
I do qmailctl restart it doesn't give any error. But if I manually
stop and then start qmail it gives the same error.
Regards,
Amit
At Wednesday, 23-06-2010 on 0:56 Eric Shubert wrote:
Amit Dalia wrote:
Hi
Hi Eric,
When I manually checked run file all supervise folder, I found below
output in authlib folder run file:
#!/bin/sh
rm -rf ./env/*;
cat /etc/courier/authlib/authdaemonrc | /usr/bin/envconv
exec /usr/bin/envdir ./env/ \
/usr/libexec/courier-authlib/authdaemond 21
Is this where error is
Oops - I had a typo. It's envconv, not envconf.
That's part of several scripts:
# find /var/qmail/supervise -name run -exec grep -H envconv {} \;
/var/qmail/supervise/pop3-ssl/run:cat /etc/courier/pop3d-ssl |
/usr/bin/envconv
/var/qmail/supervise/imap4-ssl/run:cat /etc/courier/imapd-ssl |
Thanks Eric,
That solved the problem.
Regards,
Amit
At Wednesday, 23-06-2010 on 1:19 Eric Shubert wrote:
Oops - I had a typo. It's envconv, not envconf.
That's part of several scripts:
# find /var/qmail/supervise -name run -exec grep -H envconv {} \;
/var/qmail/supervise/pop3-ssl/run:cat
Which did you choose to do?
Amit Dalia wrote:
Thanks Eric,
That solved the problem.
Regards,
Amit
At Wednesday, 23-06-2010 on 1:19 Eric Shubert wrote:
Oops - I had a typo. It's envconv, not envconf.
That's part of several scripts:
# find /var/qmail/supervise -name run -exec
Hi Eric,
I'm using Dovecot. And I prefer touch
/var/qmail/supervise/authlib/down.
Regards,
Amit
At Wednesday, 23-06-2010 on 1:56 Eric Shubert wrote:
Which did you choose to do?
Amit Dalia wrote:
Thanks Eric,
That solved the problem.
Regards,
Amit
At Wednesday, 23-06-2010 on 1:19
That's the safe way. ;)
Has anyone who is running dovecot IMAP and POP3 remove the
courier-authlib-toaster package? Would someone like to try it to see if
anything breaks? (Please don't try this on a production host)
--
-Eric 'shubes'
Amit Dalia wrote:
Hi Eric,
I'm using Dovecot. And I
-list@qmailtoaster.com
Sent: Wednesday, June 23, 2010 12:04 AM
Subject: [qmailtoaster] Re: Error while restarting qmail
That's the safe way. ;)
Has anyone who is running dovecot IMAP and POP3 remove the
courier-authlib-toaster package? Would someone like to try it to see if
anything breaks
Hi Eric,
There is no other dependency. Also shocking is yum install
perl-XML-SAX doesn't create ParserDetails.ini file. But if manually
install perl-XML-SAX it creates the file. Now I had created
ParserDetails.ini file as mentioned by Anil Aliyan in previous mail
and till now didn't get error.
I don't see any problem with the --lint diag output.
I also don't understand how perl-XML-SAX comes into play. What do you
get when you try to remove it?
# rpm -e perl-XML-SAX
I expect that if it's not there then, as Steve said, some other XML
parser will be used if/when necessary.
--
-Eric
Could this have something to do with RPM not recognizing something
installed via Perl? Did you use Perl to install something? It may be
better to use the RPMforge. I may be way off track
See response above; Eric Shubert wrote:
I don't see any problem with the --lint diag output.
I also
Hi Eric/ Kent,
Kent: I had installed this module from RPMforge only.
Eric: Please find output of command below:
[r...@mail ~]# rpm -e perl-XML-SAX
error: Failed dependencies:
perl(XML::SAX::Base) is needed by (installed)
perl-LDAP-0.33-3.fc6.noarch
Regards,
Amit
At Wednesday, 28-04-2010 on
I see. You mentioned that before.
And what requires perl-LDAP? You can do either
# rpm -e perl-LDAP
to chase each dependency, or
# yum remove perl-XML-SAX
will show you the whole dependency tree.
--
-Eric 'shubes'
Amit Dalia wrote:
Hi Eric/ Kent,
Kent: I had installed this module from
Amit Dalia wrote:
Hi Everyone,
My all mails started bouncing after sometime with the below error:
Hi. This is the qmail-send program at vanaz.com.
I tried to deliver a bounce message to this address, but the bounce bounced!
anonym...@mailserver.mails mailto:anonym...@mailserver.mailserver:
Hi Eric,
I had just modified 1 file i.e. /var/qmail/supervise/spamd/run.
Content of file is bellow:
#!/bin/sh
exec /usr/bin/spamd -x -i -u vpopmail -m 25 -A
127.0.0.1,203.197.88.12 -s stderr 21
where 203.197.88.12 is my old windows server which just connect spamd
daemon of my QMT server. And
Has anything changed on the windows server?
I've no idea why you would need XML/SAX/. Is there a rule that uses it
that's not part of the stock QMT?
How are you installing XML/SAX? I would use the rpmforge repo instead of
CPAN, but that doesn't really explain why you would need it to begin
Hi Eric,
Windows server just uses SPAMD daemon to check for spam mails
coming to windows server. Even I use rpmforge repo to install
perl-XML-SAX. I started facing this problem after upgrading to clamav
using qtp-newmodel script. I don't know how?
Also I'm using smarthost to relay mails from
On Apr 27, 2010, at 12:41 PM, Eric Shubert wrote:
I've no idea why you would need XML/SAX/. Is there a rule that uses it that's
not part of the stock QMT?
How are you installing XML/SAX? I would use the rpmforge repo instead of
CPAN, but that doesn't really explain why you would need it
Steve Huff wrote:
On Apr 27, 2010, at 12:41 PM, Eric Shubert wrote:
I've no idea why you would need XML/SAX/. Is there a rule that uses it that's
not part of the stock QMT?
How are you installing XML/SAX? I would use the rpmforge repo instead of CPAN,
but that doesn't really explain why you
On Apr 27, 2010, at 2:18 PM, Eric Shubert wrote:
Perhaps there's another XML parser that is used if XML::SAX doesn't exist? I
can only speculate. I expect that there are others on the list that know
better than I do about this.
it's the other way around; that error message indicates that
Steve Huff wrote:
On Apr 27, 2010, at 2:18 PM, Eric Shubert wrote:
Perhaps there's another XML parser that is used if XML::SAX doesn't exist? I
can only speculate. I expect that there are others on the list that know better
than I do about this.
it's the other way around; that error
Dear Eric/Steve,
Sorry I agree I should google first.
Eric: Please find output of command sudo -u vpopmail -H spamassassin
-D --lint below:
[14326] dbg: rules: compiled meta tests
[14326] dbg: check: running tests for priority: 1000
[14326] dbg: rules: running head tests; score so far=4.205
Hey Amit,
I'm particularly interested in the --lint output which lists diag:, so I
guess you could do:
# sudo -u vpopmail -H spamassassin -D --lint 21 | grep diag:
That will show if modules that are used, and if any are missing.
From what Steve said though, I'm not sure it will show what all
Hi Eric,
Please find output of the command you mentioned below:
[r...@mail ~]# sudo -u vpopmail -H spamassassin -D --lint 21 | grep
diag:
[18621] dbg: diag: perl platform: 5.008008 linux
[18621] dbg: diag: module installed: Digest::SHA1, version 2.12
[18621] dbg: diag: module installed:
Hi Eric,
If you see error below
ould not find ParserDetails.ini in
/usr/lib/perl5/vendor_perl/5.8.8/XML/SAX
ZSorry, I wasn't able to establish an SMTP connection. (#4.4.1)
I'm unable to understand how perl-XML-SAX is related to SMTP
connection. Is this somewhere related to SMARTHOST?
Regards,
To: qmailtoaster-list@qmailtoaster.com
Subject: [qmailtoaster] Re: Error in Sending Mail
Hey Amit,
I'm particularly interested in the --lint output which lists diag:, so I
guess you could do:
# sudo -u vpopmail -H spamassassin -D --lint 21 | grep diag:
That will show if modules that are used, and if any
: Wednesday, April 28, 2010 10:03 AM
To: qmailtoaster-list@qmailtoaster.com
Subject: [qmailtoaster] Re: Error in Sending Mail
Hey Amit,
I'm particularly interested in the --lint output which lists diag:, so I
guess you could do:
# sudo -u vpopmail -H spamassassin -D --lint 21 | grep diag
Biju Jose wrote:
I need to allow a particular IP to send unlimited emails thru our qmail
toaster server.
We have the following line in the tcp.smtp file.
220.xxx.yyy.zzz.:allow,RELAYCLIENT=,DKSIGN=/var/qmail/control/domainkeys/%/private,RBLSMTPD=,NOP0FCHECK=1
After a few messages
-Original Message-
From: Eric Shubert [mailto:e...@shubes.net]
Sent: Friday, April 09, 2010 9:24 PM
To: qmailtoaster-list@qmailtoaster.com
Subject: [qmailtoaster] Re: Error : 571 sorry, you are violating our
security policies
Biju Jose wrote:
I need to allow a particular IP to send
Biju Jose wrote:
-Original Message-
From: Eric Shubert [mailto:e...@shubes.net]
Sent: Friday, April 09, 2010 9:24 PM
To: qmailtoaster-list@qmailtoaster.com
Subject: [qmailtoaster] Re: Error : 571 sorry, you are violating our
security policies
Biju Jose wrote:
I need to allow
madmac wrote:
Hi guys
recently stared getting a load of this:
*511 sorry, recipient address has invalid format (#5.1.1 -chkuser)*
But looking at the emails being sent, they are correct, no funky characters.
found this on google :
SMTP Error 511 : Bad email address. This error is
similar to
Thanks for the rply eric,
This happens when a clienet sends to multiple emails at the same time,
from Outlook,
I will check the logs, and also try what you nentioned in the other
email.. ref: chkuser
Thanks
Eric Shubert wrote:
madmac wrote:
Hi guys
recently stared getting a load of this:
madmac wrote:
Can anyone tell me waht this error means and how to fix please.
it is in: /var/log/secure , multiple times
sorry, you must have a tty to run sudo ; TTY=unknown ; PWD=/ ;
USER=vpopmail ; COMM AND=/usr/bin/sa-learn --sync
Maybe something to do with spamassasin?
thanks
madmac
Rajesh M wrote:
hi
well i don't use bayes
i use the normal rules only which handles all the spam and i am getting
around 98-99 percent spam protection.
rajesh
I have the following in local.cf:
#
ok_locales all
skip_rbl_checks 0
required_score 3.7
report_safe 0
rewrite_header
Jake Vickers wrote:
Rajesh M wrote:
hi
well i don't use bayes
i use the normal rules only which handles all the spam and i am getting
around 98-99 percent spam protection.
rajesh
I have the following in local.cf:
#
ok_locales all
skip_rbl_checks 0
required_score 3.7
hi
well i don't use bayes
i use the normal rules only which handles all the spam and i am getting
around 98-99 percent spam protection.
rajesh
I have the following in local.cf:
#
ok_locales all
skip_rbl_checks 0
required_score 3.7
report_safe 0
rewrite_header Subject [SPAM]
Rajesh M wrote:
hi all
i faced this error for the first time
tried googling and also the toaster forums but got no info
i need to know what this error means and how to resolve the same
thanks to all in advance
rajesh
clarifications
mailer-dae...@ns1.serverdomain.com -- is bounce address
Rajesh M wrote:
hi all
i faced this error for the first time
tried googling and also the toaster forums but got no info
i need to know what this error means and how to resolve the same
thanks to all in advance
rajesh
clarifications
mailer-dae...@ns1.serverdomain.com -- is bounce address
hello
###
ok_locales all
skip_rbl_checks 1
required_score 5
report_safe 1
rewrite_header subject ---SPAM---
use_razor2 1
#use_pyzor 1
#use_auto_whitelist 1
use_bayes 0
use_bayes_rules 0
bayes_auto_learn 0
###
spamassassin --lint gives no errors
rajesh
Rajesh M
I have the following in local.cf:
#
ok_locales all
skip_rbl_checks 0
required_score 3.7
report_safe 0
rewrite_header Subject [SPAM]
use_pyzor 1
use_auto_whitelist 1
bayes_path /home/vpopmail/.spamassassin/bayes
use_bayes 1
use_bayes_rules 1
bayes_auto_learn 1
90 matches
Mail list logo