this? And if so,
how would it be?
In addition, say if I have a power outage from 3am to 4am... is there a way
Rivendell can skip all music from 3am to 4am upon Rivendell recovery?
Thank you for your help.
--
Signed,
Patrick Schmalstig
CEO/Founder of WRRJ Radio
http://www.wrrj.org
please remember:
my end and from
Shoutcast. Nothing.
Assistance would greatly be appreciated. Thank you!
--
Signed,
Patrick Schmalstig
Founder/Administrator of WRRJ Radio
https://www.wrrj.org
please remember: some of my emails are delayed 24 hours before I send them
out in order to give me time to check the conte
Fixed: Never mind. The problem was the IP being 127.0.0.1 in Rivendell.
Changed to a static IP of my computer and it works now.
On Sun, Jun 9, 2013 at 11:12 AM, Patrick Schmalstig / WRRJ Radio <
xana...@gmail.com> wrote:
> Greetings all!
>
> I am running rivendell 2.5.1 on Ubun
ndell system is set on 127.0.0.1. I tried
127.0.1.1 too and it didn't work.
This used to work fine until I had to re-install my operating system due to
a hard drive corruption. Now I cannot get rmlsend to work.
Help would greatly be appreciated!
--
Signed,
Patrick Schmalstig
Founder/A
Okay. In that case it may be a problem with LAME. I heard sometimes it's a
permissions problem... that LAME needs to run as root and for whatever
reason LAME is not running as root.
Sorry if I sounded snappy when I said my question wasn't answered.
If it is a problem with LAME, possibly it's what
Typically that means Darkice was not able to connect to your Shoutcast
server for whatever reason.
My question was not answered though. Did you double check your darkice
config for the pointers I have stated?
On Thu, Jan 3, 2013 at 4:01 PM, Joseph Matthews wrote:
> When I run darkice I see it a
B*
> Easy listening music just for you Beautiful97.com<http://beautiful97.com/>
>
> On Jan 3, 2013, at 2:10 PM, "Patrick Schmalstig / WRRJ Radio" <
> xana...@gmail.com> wrote:
>
> What problems do you have when you tried Darkice?
>
>
n provide. I have searched and searched the
> net with no luck thus far.
>
> Thanks,
>
> *Joey Matthews*
> xcint...@gmail.com
>
> ___
> Rivendell-dev mailing list
> Rivendell-dev@lists.rivendellaudio.org
> http://lists.
I apologize for the second email, but where it says
"media/Personal/rdairplay.log", you will need to change that to a valid
writable path.
On Sat, Dec 8, 2012 at 2:30 PM, Patrick Schmalstig / WRRJ Radio <
xana...@gmail.com> wrote:
> Here's the code:
>
> $processid
create a cron job executing "php
path/to/this/phpfile.php" every minute, and you should be okay.
Please test this once by closing out rdairplay after the cron job was
created. See if it loads after a couple minutes. If not please let me know.
:)
-Patrick
On Sat, Dec 8, 2012 at 12:00
...actually I think he upgraded to 12.04 Ubuntu. But same principle. Kill
and keep off Pulseaudio! It is Rivendell's worst enemy.
I happen to be one of the lucky ones who have Pulseaudio and Rivendell
working and not conflicting thanks to JACK and JACK Mixer, as well as a
custom asound.conf.
Anyw
ic so it's definitely not a good thing to have to
do, even if rdairplay still crashes more than once per day. ...and I'm
in college so I can't always quickly recover it.
I appreciate the help.
On Thu, Oct 25, 2012 at 2:03 AM, Patrick Schmalstig / WRRJ Radio
wrote:
> Additional info
laudio.org/mailman/listinfo/rivendell-dev
>
--
Signed,
Patrick Schmalstig
Founder/Administrator of WRRJ Radio
https://www.wrrj.org
please remember: some of my emails are delayed 24 hours before I send
them out in order to give me time to check the content of my emails.
Please call m
I have a copy of the module if you wish to use it. Ill upload it to my website
and give you the download link in the morning.
The module if I recall was IN the source directory and you simply just copied
that file elsewhere... No need to compile.
Sent from WRRJ portable iPod broadcasting system
n (which takes to an "error" audio clip in case rmlsend doesn't
load a new log).
On Wed, Oct 24, 2012 at 2:20 PM, Patrick Schmalstig / WRRJ Radio
wrote:
> I'm not sure which version of Rivendell... the only version number I
> can find is in the backups which reads database
I'm not sure which version of Rivendell... the only version number I
can find is in the backups which reads database version 205.
On Wed, Oct 24, 2012 at 1:30 PM, Fred Gleason wrote:
> On Oct 24, 2012, at 10:37 01, Patrick Schmalstig wrote:
>
>> I just upgraded it yesterday and
> Hello Im having trouble with Rivendell 2.2.0-1 on Xubuntu 12.04 (installed by
> tryphon repositories).
I just upgraded it yesterday and first thing I ran rdadmin to upgrade database.
Rdairplay almost never crashed before I upgraded. Now its crashing with SIGABRT
in raise()
Permissions should
It looks like SOX can do ogg from their website... but I've had no
experience with it. I've only had experience with FFMPEG, LAME, and
Audacity. You could try it and let us know how it works!
> On Fri, Oct 12, 2012 at 4:51 PM, Cowboy wrote:
>>
>> On Friday 12 October
I was just now having this problem on XUbuntu 12.04 (but it was with
the repositories) with the web uploader. It imports a couple seconds
of the ogg and nothing else, even though Rivendell logged the full
length of the ogg instead of the length that was imported.
My suggestion is to use FFMPEG (in
I hate to sound rude but please stop spamming the mailing list by repeatedly
posting in short periods of time. It is annoying and an inconvenience. The
Rivendell system is open source so support is offered as a volunteer basis (in
other words people don't have to help you and if they do they don
If you want my two cents as far as a silent monitoring script for
mplayer... I don't use mplayer but I use an internet streamer called
darkice to stream from JACK to the internet... and when the internet clucks
out darkice crashes. I've created a small php script which executes every
minute. The fi
One more thing
IN THE SCRIPT, edit before you save/run:
Your host, user, and pass in:
$sqlconnection = mysql_connect("your mysql host", "your username",
"your password") or die(mysql_error());
"YOUR GROUP TITLE" in:
$result = mysql_query("SELECT `Rivendell`.`CART`.`NUMBER` FROM
`Rivendell`. `CART
.. replace "/this/path/you/choose.php" to the path of
your saved php file)
Please let me know how this works. This script was not tested... I had
to edit it on the fly from the one I use. If you get any errors please
let me know.
On Wed, May 9, 2012 at 7:43 PM, Patrick Schmalstig / WRRJ
Hey hang on I have a query I actually use myself that does just
that... although not specific group but specific scheduling code.
On Wed, May 9, 2012 at 7:39 PM, Jimmy Stinson wrote:
> My mysql script writing abilities are limited. I found the script to
> set the PLAY_COUNTER to 0 and would like
> On Wed, Apr 11, 2012 at 11:57 AM, Benjamin D. Fillmore
> wrote:
> > You need to make sure compiz is not enabled
> >
> > VNC will display a blank screen if it is.
> >
> >
> > On 4/10/2012 6:02 PM, Patrick Schmalstig / WRRJ Radio wrote:
> >
>
I use the MeshCentral website, however the remote desktop control doesn't
fully work on Ubuntu. It may work the first time you install it and then
after you can't see the screen when you connect. I'm going to try xrdp.
Anyone tried xrdp before? How is it?
On Tue, Apr 10, 2012 at 5:28 PM, Fred Glea
Unfortunately I have not ever heard of library management from the web for
Rivendell.
What I do for remote uploading on WRRJ Radio is I integrated the HTML code
from the pages in rd-bin within my website. An example is at
https://www.wrrj.org/admin/add-audio-to-station . I could tell you how to
do
Hello.
I am in a set up requiring I have some sort of compressed audio. I use
mp2... saved as wav. Problem is though even if I have sound panel buttons
set to allow for pause, the audio itself starts over when I resume the
button.
Say if a button has 30 second audio clip. I pause it at 3 seconds
f memory serves me, and i am not near a rivendell computer right now, try
> and rename a mp2 file to wav...i think Rivendell, and most programs read
> it, cartchunk and all
>
> ----------
> *From:* Patrick Schmalstig / WRRJ Radio
> *To:* User discussion
Hello thanks for all the tips... I figured out how to use ffmpeg to convert
the PCM wav to MP2 wav on 256kbps when it originally was saying that mp2
doesn't support 256k bitrate. It only supports that bitrate when the mp2
audio is saved as a wav. Weird.
On Tue, Mar 20, 2012 at 9:51 AM, Fernando De
So if ffmpeg is saying 256kbps is not a supported bitrate for mp2 how do I
convert my wavs to 256kbps mp2?
On Mon, Mar 19, 2012 at 5:44 PM, Patrick Schmalstig / WRRJ Radio <
xana...@gmail.com> wrote:
> Interesting because my computer still says the audio is in x-wav format.
> But may
Interesting because my computer still says the audio is in x-wav format.
But maybe it's just basing that off of metadata and not actually looking at
the audio file itself.
On Mon, Mar 19, 2012 at 5:18 PM, Fred Gleason wrote:
> On Mar 19, 2012, at 17:02 43, Patrick Schmalstig / WRRJ Rad
itrate wav?
On Mon, Mar 19, 2012 at 4:33 PM, Scott Powell wrote:
> If memory serves me right
>
> Configuration>RdAdmin>Manage Host>RdLibrary>Format. switch from PCM16 to
> Mpeg2
>
>
>
> On Mon, Mar 19, 2012 at 3:23 PM, Patrick Schmalstig / WRRJ Radio <
This is a dumb question but I cannot for the world find the answer on
Google.
How do I get Rivendell to store and use my music library as MPEG layer 2
(mp2)?
___
Rivendell-dev mailing list
Rivendell-dev@lists.rivendellaudio.org
http://lists.rivendellaudi
alright thanks I'll see what I can do.
On Mon, Mar 19, 2012 at 2:59 PM, Fred Gleason wrote:
> On Mar 19, 2012, at 14:37 13, Patrick Schmalstig / WRRJ Radio wrote:
>
> > What latency are you referring to exactly?
>
> Data traffic in general between the two RD systems. Rem
What latency are you referring to exactly? If you're referring to latency
caused by live audio going from the client to the rivendell server, that
will not be an issue for I'll be using Skype for live shows.
I'll see what I can do but how exactly would I set up a tunnel system on a
dynamic IP serv
not typically attributes found with
> residential ISPs. Business tier ISPs will provide static IP addresses on
> request if not by default.
>
> What exactly are you trying to achieve in terms of functionality? What
> does your setup look like?
>
> Cheers,
> James Harrison
>
; issue.
>
> I don't know of any way to make Rivendell work with any machines on
> dynamic IP addresses.
>
> Cheers,
> James Harrison
>
>
> On 19/03/2012 17:49, Patrick Schmalstig / WRRJ Radio wrote:
>
> Hello!
>
> I run a Rivendell server on the domain w
Hello!
I run a Rivendell server on the domain www.wrrj.org but unfortunately it is
a domain with a dynamic (changing) IP address. Is there any way I can use
wrrj.org in my hosts settings in rdadmin instead of constantly trying to
change the IP address to the correct one? ...or at least have a diff
orth Carolina that appears to have no open
> ports, but the machine is accessible through a port on my computer here in
> Massachusetts.
>
>
> On Mon, 27 Feb 2012, Patrick Schmalstig / WRRJ Radio wrote:
>
>> ...and that's what would make it not work. Campus does not
> On Feb 27, 2012, at 7:55 PM, Patrick Schmalstig / WRRJ Radio wrote:
>
>> you then need to install php5-mysql. Use same method "sudo apt-get
>> install php5-mysql" or other method.
>>
>> On Mon, Feb 27, 2012 at 7:31 PM, Joseph Matthews wrote:
>>>
icgenny/select1.php on line 3
>
> Joseph Matthews
> xcint...@gmail.com
>
> On Feb 27, 2012, at 7:08 PM, Patrick Schmalstig / WRRJ Radio wrote:
>
>> forgot to mention before adding that line to php.ini you'll need to
>> create an empty /var/log/php5_error.log file a
tion must be at least 10 Mb/s and your
> college should let you download data at this bitrate.
>
> If you compress all your Rivendell library to MP2, you'll need less bandwith
> (maybe 512 kb/s), but still it is a great bandwidth, and you'll be affected
> by the latency and oth
forgot to mention before adding that line to php.ini you'll need to
create an empty /var/log/php5_error.log file and chmod it to 777.
On Mon, Feb 27, 2012 at 7:06 PM, Patrick Schmalstig / WRRJ Radio
wrote:
> Traffic logs by default saved in Apache2 logs (/var/log/apache2).
> Sometimes
ny traffic log is being generated,
> and if it is, where would it be saved?
>
> Joseph Matthews
> xcint...@gmail.com
>
> On Feb 27, 2012, at 6:39 PM, Patrick Schmalstig / WRRJ Radio wrote:
>
>> sounds like you didn't install PHP on your system. If in linux, in a
>>
sounds like you didn't install PHP on your system. If in linux, in a
terminal type "sudo apt-get install php5" or "sudo aptitude install
php5" or whatever command you use in your distro for your
repositories.
On Mon, Feb 27, 2012 at 6:34 PM, Joseph Matthews wrote:
> Can anyone provide some basic
...and that's what would make it not work. Campus does not allow ANY
port to be open on any computers on their network. I can open SSH port
on computer not located at college but not on the one that is at
college.
> Almost.
> The port would be open on the campus computer, but ONLY for
> incomin
Alright here's what I've decided to try and do for a set up. This was
suggested by my campus network security... as being the best option if
it is possible. Please let me know if it is possible and how to do it.
It's different from the original planned set up.
Computer 1 located at my Mom's house:
Oh okay nvm I see what you're going at when it somes to SSH... I
thought you meant have a port open on the campus computer... which
wouldn't be permitted. But you're talking having a port open on the
web server computer, am I correct?
___
Rivendell-dev ma
...also forgot to mention https port 443 is already being used for the
website on my web computer, and so is port 80... both for the website.
I don't think SSH would work then on the same port.
On Sat, Feb 25, 2012 at 8:37 PM, Patrick Schmalstig / WRRJ Radio
wrote:
> The campus will no
Sat, Feb 25, 2012 at 6:54 PM, Rob Landry <41001...@interpring.com> wrote:
>
>
> On Sat, 25 Feb 2012, Patrick Schmalstig / WRRJ Radio wrote:
>
>> SSH connections I fear would probably also not be permitted at my
>> college campus for fear they would think I'm ei
t would be a
downstream connection (campus computer requests connection to web
server computer)... which is permitted.
I can draw a diagram of what I'm trying to explain if it helps.
On Sat, Feb 25, 2012 at 12:40 PM, Cowboy wrote:
> On Saturday 25 February 2012 10:21:30 am Patrick Schma
Hello. I'm needing to make a quick and sudden change to my Rivendell
setup since I'm moving away to college. My college will not permit the
use of anything that listens for inbound connections on the internet
network. Thus, I need to split my Rivendell setup from one to two
computers... and I'm goi
hon.org/wiki/Rivendell_on_Debian_6
>>
>> Regards,
>>
>> Wayne
>>
>> On Sun, 19 Feb 2012 23:31:53 -, Troy Welch
>> wrote:
>>
>> > The sound card is not playing currently. There was a topic I noticed on
>> > the rivendell site that
Feb 19, 2012, at 6:34 PM, "Patrick Schmalstig / WRRJ Radio"
> wrote:
>
>> ...could just be an Ubuntu issue too because I've had that problem
>> before even though speaker still showed that it was playing.
>>
>> On Sun, Feb 19, 2012 at 6:31 PM, Troy Welch
d about the 1010 audio card.
>
> Sent from my iPhone
>
> On Feb 19, 2012, at 6:24 PM, "Patrick Schmalstig / WRRJ Radio"
> wrote:
>
>> Touchscreen I'm quite sure you can. I do not know much about
>> soundcards. If the soundcard you're using now w
t my dell touchscreen to work with it?
>
> And my delta 1010lt soundcard?
>
> Sent from my iPhone
>
> On Feb 19, 2012, at 6:17 PM, "Patrick Schmalstig / WRRJ Radio"
> wrote:
>
>> That's what I'm going to do for Troy... except I have in my guide
>&g
pos and then
> installing the rivendell packages.
> http://www.tryphon.eu/en/blog/2012/01/05/rivendell-2.1.2-debian-ubuntu/
>
>
> -Daniel
> Family First Radio Network
>
>
>
> On Sun, Feb 19, 2012 at 4:55 PM, "Patrick Schmalstig / WRRJ Radio"
> wrote:
>>
them here being google groups it would go public which is unsafe)
On Sun, Feb 19, 2012 at 5:55 PM, Troy Welch wrote:
> Ok
>
> Sent from my iPhone
>
> On Feb 19, 2012, at 5:52 PM, "Patrick Schmalstig / WRRJ Radio"
> wrote:
>
>> I have an account on mesh cen
gt;>
>> ...I found a guide on installing on 10.04... actually two of them...
>> so that'll help me out if you wish for me to install it for you.
>>
>> On Sun, Feb 19, 2012 at 5:30 PM, Patrick Schmalstig / WRRJ Radio
>> wrote:
>> > ...if you would like me to.
...I found a guide on installing on 10.04... actually two of them...
so that'll help me out if you wish for me to install it for you.
On Sun, Feb 19, 2012 at 5:30 PM, Patrick Schmalstig / WRRJ Radio
wrote:
> ...if you would like me to... if you want Rivendell 2 it's pretty
>
2012 at 5:26 PM, Troy Welch wrote:
> I could also do a direct connect remote assistance if you could assist that
> way as well.
>
> Or thru chat?
>
> Sent from my iPhone
>
> On Feb 19, 2012, at 5:24 PM, Troy Welch wrote:
>
>> 10.04 lts
>>
>> Sen
I can try... what version of Ubuntu?
On Sun, Feb 19, 2012 at 4:21 PM, Troy `Welch wrote:
> Anyone willing to assist with installing Rivendell on Ubuntu?
>
> I am very new to this and have no idea how to install the software.
>
> Willing to allow someone to connect to the machine if need be.
>
> A
I've tried quoting it... and that did not work. I believe I've tried
escaping it too but I'm not sure if I did.
On Fri, Jan 13, 2012 at 8:57 AM, Cowboy wrote:
> On Friday 13 January 2012 08:32:21 am Patrick Schmalstig / WRRJ Radio
> wrote:
> > JACK Mixer name
I've tried that method before... it's not the most reliable even on a 3GB
RAM system with a core2 Duo processor. If Audacity wants to mess up (which
sometimes it does) by getting set at a sample rate other than that of JACK,
the recordings don't sound the best.
In addition, some set up is required.
That's an idea... but thread starter... when you say "rebroadcast at a
later time", how late are we talking? Knowing that could help us come up
with more ideas.
On Thu, Jan 12, 2012 at 11:19 PM, Stan Fotinos wrote:
> Hi
>
> Maybe setup recordings for 1 week only and then have those recordings
> u
There might be a basic php script I could develop for this... that would
query MySQL and change the cart destination of the entry in rdcatch
automatically... triggered by cron. You would need to install the client
php5 on your system.
There aren't any other suggestions I can think of presently.
O
I'm doing things a lot differently with my internet radio station as
compared to most professional radio stations... I'm not after to be a
"typical" professional radio station... not even a "professional" radio
station. My service is simply a way to get messages from different churches
known to oth
aration. Plus I think you'd end up with tons of codes so you could
> keep album tracks together.
>
> My advice is read the web page link and get your head around the
> scheduler, most of what you're asking can be done using that and tweaking
> rules.
>
> Regards,
>
On Mon, Jan 2, 2012 at 1:18 AM, Kevin Miller wrote:
> On 01/01/2012 06:58 PM, Patrick Schmalstig / WRRJ Radio wrote:
>
> > Does anyone have any hints on how to shuffle my cuts on a per-cart basis
> > efficiently? ...even if I have to use a PHP script executed on a
> > sc
in a cart has been removed, with all cut rotation now
>> using the original 'sequential' algorithm.
>> /snip
>>
>> Hope that helps,
>> Robert
>>
>> On Sun, Jan 1, 2012 at 9:58 PM, Patrick Schmalstig / WRRJ Radio
>> wrote:
>> > I
Retired. The ability to schedule cuts to rotate
> 'randomly' within a cart has been removed, with all cut rotation now
> using the original 'sequential' algorithm.
> /snip
>
> Hope that helps,
> Robert
>
> On Sun, Jan 1, 2012 at 9:58 PM, Patrick
ec 30, 2011 at 2:10 AM, Patrick Schmalstig / WRRJ Radio <
xana...@gmail.com> wrote:
> Hello.
>
> I have went through the database on my Rivendell 2.1.0 system under Ubuntu
> Studio 11.10 and set all my music carts' play order from 0 to 1 to indicate
> to play cuts rando
Hello.
I have went through the database on my Rivendell 2.1.0 system under Ubuntu
Studio 11.10 and set all my music carts' play order from 0 to 1 to indicate
to play cuts randomly.
It doesn't seem random enough. It's like if I was playing a regular
rotation except the cuts are in different order;
Yeah I guess... it looks fine on my end but not on others.
On Thu, Dec 29, 2011 at 1:56 PM, Fred Gleason wrote:
> Looks like the site's been cracked.
>
> Cheers!
>
>
> |-|
> | Frederick F. Gleason, Jr. | Chief D
your browser got hijacked, lol! It seems legit to me... talks about the
audio routing program. Wow.
On Thu, Dec 29, 2011 at 1:28 PM, Alan Peterson
wrote:
> Anybody been up to the homepage for JACK audio in recent times?
>
> http://www.jackaudio.org/
>
> Half the site seems dedicated to erectile m
That was the only lock file that existed.
On Wed, Dec 28, 2011 at 10:28 AM, Cowboy wrote:
> On Wednesday 28 December 2011 09:59:39 am Patrick Schmalstig / WRRJ Radio
> wrote:
> > Rdairplay keeps giving me an
> > error saying "multiple instances not allowed!" But I
:
> On Dec 28, 2011, at 09:59 39, Patrick Schmalstig / WRRJ Radio wrote:
>
> > I have been trying to get Rivendell working again. Starting about 2-3
> days ago, everything EXCEPT rdairplay worked fine. Rdairplay keeps giving
> me an error saying "multiple instances not al
I have been trying to get Rivendell working again. Starting about 2-3 days
ago, everything EXCEPT rdairplay worked fine. Rdairplay keeps giving me an
error saying "multiple instances not allowed!" But I checked a couple
process managers and there is NO rdairplay processes running! I even
terminated
sorry it's supposed to be start Dec 1 2011 23:10:06 and end Dec 2 2011
00:10:06. Miscalculated
On Wed, Dec 21, 2011 at 3:54 PM, Patrick Schmalstig / WRRJ Radio <
xana...@gmail.com> wrote:
> Alright I looked at the web_api.odt file and I set up a editcut.html page.
> Thing
Alright I looked at the web_api.odt file and I set up a editcut.html page.
Things work except the start_datetime and the end_datetime fields. It only
allows GMT values, and when Rivendell tries to convert the times into EST
(which is what I use) sometimes it doesn't do it correctly. Example, if
sta
I do not have a page to edit a cut... only a page to edit a cart.
>
> What you'll need to do is create the cut using AddCut and then modify the
> dayparting using EditCut. See the web services API documentation in
> 'docs/web_api.odt' for the specifics.
>
> Cheers!
>
>
> |
I also forgot to mention...
Say there is a cart with multiple cuts... cut 001 and cut 002.
cut 001 was created by user1, and cut 002 was created by user2.
Is it possible to restrict user1 from doing anything with cut 002 belonging
to user2, and vice versa restricting user2 from doing anything wi
Hello.
I'm trying to redo the web interface html pages so that, for example, on
the addcut.html page, the person using that page, besides the username,
password, and cart number, also has the options of selecting the days of
the week in which to or not to play the cut via checkboxes, and specifyin
That's okay. I am having one problem left... my remote web interface for
rivendell is malfunctioning giving me an internal server error. I checked
my logs and they say something like [Mon Dec 19 21:52:54 2011] [error]
[client 127.0.0.1] QSettings::sync: filename is null/empty.
Any thoughts on this
I've tried using dropboxes as well... says I need to set up a cron job or
something? This was something I read on the internet. Dropboxes never
really worked for me.
On Tue, Dec 20, 2011 at 10:33 AM, Nathan Steele <
nathan.ste...@thecrossfm.com> wrote:
> **
> Theyre called dropboxes in rivendell.
Sorry does my email say I'm Robert (I'm not trying to sound mad I really
did want to make sure my name wasn't Robert in my from field)? My name's
Patrick.
After reinstalling rivendell, /etc/rd.conf for the top part now reads:
AudioOwner=
AudioGroup=rivendell
However I used that assistant when I
again everyone for your help! Now I can work on getting the station
back online!
On Mon, Dec 19, 2011 at 6:50 PM, Patrick Schmalstig / WRRJ Radio <
xana...@gmail.com> wrote:
> I noticed my JACK periods/buffer was set at 2 which according to rivendell
> docs should be set at 4.
>
&
Okay scratch that I removed the source package and re-installed via tryphon
packages.
Success!
rdxport.cgi is working as well as rdimport.
Music is importing the way it should and sounds the way it should.
I had to make sure all sample rates were correct... rivendell is running at
48000 hertz n
n at 44100.
>
> I am prepared to wager your on board card is running at 48,000 and
> looking at the problems others are having with all sorts of audio
> situations, it's not supported.
>
> R
>
> On 20/12/2011 09:49, Patrick Schmalstig / WRRJ Radio wrote:
> > I ca
08 PM, Cowboy wrote:
> On Monday 19 December 2011 02:10:15 pm Robert Jeffares wrote:
> >
> > On 20/12/2011 02:54, Patrick Schmalstig / WRRJ Radio wrote:
> > > The sound card I am using? Intel HDA STAC92xx according to Linux.
> >
> >
> > that's an 'on bo
nd audio group
>
> On 20/12/2011 03:05, Patrick Schmalstig / WRRJ Radio wrote:
> > AudioOwner=rduser
> > AudioGroup=rivendell
>
> --
> Robert Jeffares
> Big Valley Radio
> Thames New Zealand
> ___
&g
I just now tried patrick:patrick, which rdxport.cgi seems to want to run
as, and chowned it to that, as well as changed those values in
/etc/rd.conf. That did not work either! (I reset my changes).
>
>
>
___
Rivendell-dev mailing list
Rivendell-dev@lists
Output of rd.conf
[Identity]
; Specify who uses rivendell interfaces (like rdairplay)
; This user must be into the rivendell unix group
AudioOwner=rduser
AudioGroup=rivendell
[mySQL]
Hostname=localhost
Loginname=root
Password=(I inserted root password here but will not make it visible in the
outp
questions.
strace is getting me a bunch of things that I didn't expect... and it is
not giving me anything about the importing or the sample rates.
On Mon, Dec 19, 2011 at 12:32 AM, Robert Jeffares wrote:
>
>
> On 19/12/2011 14:27, Patrick Schmalstig / WRRJ Radio wrote:
> >
group and
also under root and root). When I've tried all these different users and
groups I also changed the rdxport.cgi permissions to the same user and
group. I also tried chmod 4755 rdxport.cgi.
Nothing at all is working.
On Sun, Dec 18, 2011 at 9:13 PM, Patrick Schmalstig / WRRJ Radio
ource and destination audio folders??
>
>
>
> On 11-12-19 01:59 AM, Patrick Schmalstig / WRRJ Radio wrote:
>
> No I'm calling rdimport from rdlibrary, but thanks for asking.
>
> What I have been doing is opening up rdlibrary FROM A TERMINAL RUNNING
> AS MY USER which is also
No I'm calling rdimport from rdlibrary, but thanks for asking.
What I have been doing is opening up rdlibrary FROM A TERMINAL RUNNING AS
MY USER which is also set as the Rivendell audio user. I try to import a
cut from an mp3 file (also tried wav) into a cart... and it gives me
"Invalid URL".
---
ou running at?
>
> Robert
>
>
>
> On 17/12/2011 16:44, Patrick Schmalstig / WRRJ Radio wrote:
> > I have had no luck with this issue. Please someone reply to me saying at
> > least that you're checking in on this... I'm trying to have my entire
> > radio station
RAbuntu is a great way to have a running
> system up in a hurry. Look at their Sourceforge project pages (
> http://rrabuntu.sourceforge.net/). If you have the money in your budget,
> you can't go wrong with a turnkey and then you have someone that really
> does have a responsib
1 - 100 of 114 matches
Mail list logo