Make sure to get the axles from the donor car as well. Best way to make
sure you don't run in to any other problems. Everything else should swap
over as far as I know.
Thanks,
Marc Medina
www.marcmedina.com
From: Shawn
the
junkyard.
$40 plus shipping.
Late model front grille - has the cross style look like the current
cars.
$20 plus shipping.
Thanks,
Marc Medina
www.marcmedina.com
---REMOVE-FOOTER-WHEN-REPLYING
Questions? Visit http://www.sdml.org/
To be removed
Uh, damn few I'd say.
Marc
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Billy Dean
Sent: Monday, May 22, 2006 5:10 PM
To: [EMAIL PROTECTED]
Subject: SD Production numbers question
Anybody know where I can find the production numbers for a 90 dodge
as you'll have to replace your sway bar and it also moves the front of
the tire closer to the fender (caster change).
Thanks,
Marc Medina
www.marcmedina.com
From: [EMAIL PROTECTED]
To: shelby-dodge@imagicomm.com
Subject: SD k
OK GUYS,
This is the last chance to get a smokin deal on this stuff before it goes
on E-Bay.
www.marcmedina.com/parts.html
First come, first serve - money talks, and you know the
rest...
Thanks,
Marc Medina
www.marcmedina.com
---REMOVE-FOOTER-WHEN-REPLYING
Hi Guys,Well, I replaced the Spirit yesterday with this:
www.marcmedina.com/mr2 Marc
---REMOVE-FOOTER-WHEN-REPLYING
Questions? Visit http://www.sdml.org/
To be removed, visit http://www.sdml.org/pages/leave.html
to a 2.5 that makes
175 hp, so it's certainly no Honda slug.
Thanks,
Marc Medina
www.marcmedina.com
From: [EMAIL PROTECTED] [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED], Marc Medina [EMAIL PROTECTED
Well guys, the time has come to throw in the towel on the Spirit. The
good parts from it are now available on a first come first serve basis.
I've got over $10,000 in the car now and still no end in sight, so I have
to stop here. At the moment, here are some of the things I can think of
that I
OOPS, should have said Spirit, not Spiit.
Marc
Subject: SD Spiit is R.I.P.
Well guys, the time has come to throw in the towel on the Spirit. The good
parts from it are now available on a first come first serve basis.
I've got over $10,000 in the car now and still no end in sight, so I have to
Ron,
Order a complete set of mounts from Johnny - www.polybushings.com that will
take care of the engine movement problem and also improve drive-ability
significantly too. I think he has instructions on his site about how to
center the engine.
Marc
www.marcmedina.com
-Original Message-
Not SD related, but interesting!:
Here's a good reason to stay up late ...
On Wednesday, April 5th, at two minutes and three seconds after 1:00in
the morning, the time and date will be 01:02:03 04/05/06.
Thanks,
Marc Medina
www.marcmedina.com
---REMOVE-FOOTER-WHEN
Well guys, I think I'm going to be changing the direction of the Spirit -
but not in a way most of you will like. It's been too expensive and
turned the car into a fast (and fun) car that is not reliable. So, I'm
going to partially part out the Spirit. Partially in that I'm going to
sell off all
for the 15 or 16 pumpers - $45 shipped First come, first
serve, let me know by e-mail or call me at 707-478-5669. Pics available
if needed. PLEASE NOTE: I am leaving for work and will be gone till 10PM
West Coast Time, so call me if you're really hot and bothered for a part.
Thanks,
Marc Medina
sealed WAY past the warranty period - which is what new cars are
all about (making it through the warranty period without problems - after
that, you're paying for the service!).
Thanks,
Marc Medina
www.marcmedina.com
From
Best depends on who you ask and what you are doing with it. Personally,
I'd pay the extra (I did actually) for the Cometic gasket and the ARP studs.
Marc
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Edward Mazurek
Sent: Thursday, March 30, 2006 3:34
Hi Cliff,
I tried to reply to you and I got:
The original message was received at Tue, 28 Mar 2006 01:45:21 -0500 (EST)
from bay0-omc3-s2.bay0.hotmail.com [65.54.246.202]
*** ATTENTION ***
Your e-mail is being returned to you because there was a problem with its
delivery. The address which
, you're right about it venting boost and loosing performance.
Thanks,
Marc Medina
www.marcmedina.com
From: [EMAIL PROTECTED]
To: Shelby Dodge Mailing List [EMAIL PROTECTED]
Subject: SD Fluttering BOV
Date: Thu, 16 Mar
people flake on me, I'm
not going to get anything for you unless you can Pay Pal me before I go.
Please reply to me directly with your phone number or call me on my cell
after 2PM West Coast time (until 10 PM West Coast Time) if you REALLY REALLY
want something.
Thanks,
Marc Medina
Funny thing is, Nissan still has a current production version of the
Rampage. I saw them every day when I was in Thailand. 22 years later it's
not a bad idea to Nissan
Marc
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of David Salamone
Sent: Sunday,
Hi Guys,
I'm seriously considering starting a small business doing economy head
porting. I'd like some feedback from you on what you would want as far as
different cost levels and how much porting you would expect for that price.
This is a rough idea of what I am thinking so far:
Stage 1 -
Not mine, just saw the listing
http://www.craigslist.org/eby/car/136408172.html
Thanks,
Marc Medina
www.marcmedina.com
From: Edward Mazurek [EMAIL PROTECTED]
To: sdml \[EMAIL PROTECTED] [EMAIL PROTECTED]
Subject
Where are you located?
Thanks,
Marc Medina
www.marcmedina.com
From: Chris VanKauwenberg [EMAIL PROTECTED]
To: Shelby Dodge [EMAIL PROTECTED]
Subject: SD WTB: RIMS and/or tires 90Acclaim
Date: Thu, 23 Feb 2006 11:36
intercooler and am MP computer or a good one from Turbos Unleashed
and you're down the road - with an extra 50 HP!
BTW, I'll be pulling the Daytona intercooler setup from my Spirit to
replace it with one from an R/T. So if you want one that's been cleaned
and pressure checked, let me know.
Thanks,
Marc
That's what ducting is for!
Marc
www.marcmedina.com
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: Sunday, January 29, 2006 7:53 PM
To: [EMAIL PROTECTED]
Subject: SD SRT4 intercooler
Well I'm sitting here looking at my patment
Don't lower the level on the stick, add more oil! Mine takes about 7
quarts now.
Thanks,
Marc Medina
www.marcmedina.com
From: Darrell - [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: SD 2.5 oil fill question
http://www.marcmedina.com/parts.html
Also updated the site quite a bit. Happy New Year!
Thank You,
Marc Medina
www.marcmedina.com http://www.marcmedina.com/
---REMOVE-FOOTER-WHEN-REPLYING
Questions? Visit http://www.sdml.org/
To be removed
Where are you located?
Thanks,
Marc Medina
www.marcmedina.com
From: Josh Bourgeois [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: SD WTB-Spirit RT/ES Front End Parts
Date: Wed, 16 Nov 2005 22:19:29 -0500
the work.
Thanks,
Marc Medina
www.marcmedina.com
From: Dave Krulitsky [EMAIL PROTECTED]
To: Shelby-Dodge [EMAIL PROTECTED]
Subject: SD intakes
Date: Mon, 14 Nov 2005 21:40:46 -0800
I am redoing my 86 glht. It's a 2.5
There is a 4 degree difference between the round and sqaure tooth stuff,
but I don't remember which way that difference is.
Hopefully someone can chime in with the right answer.
Thanks,
Marc Medina
www.marcmedina.com
it, contact me for more info.
Thank You,
Marc Medina
www.marcmedina.com http://www.marcmedina.com/
-Original Message-
From: Marc Medina [mailto:[EMAIL PROTECTED]
Sent: Sunday, September 25, 2005 10:59 PM
To: 'MoparTurbo'
Subject: RE: SD stock digital dashes
I left two messages for you
, but I have no way to test either of these.
$25 each or both for $40 to the first list member who speaks up.
Actual shipping cost only.
Thanks,
Marc Medina
www.marcmedina.com http://www.marcmedina.com/
---REMOVE-FOOTER-WHEN-REPLYING
Questions
blow
off valve on the t1 setup.
Thanks,
Marc Medina
www.marcmedina.com
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Mike Fisher
Sent: Sunday, September 25, 2005 9:30 PM
To: Shelby Dodge
Subject: SD Late T1 to T2 modification
What is it that I have
The junkyard here is having a great sale on digital dashes an consoles this
weekend. Anyone need one?
Thanks,
Marc Medina
www.marcmedina.com http://www.marcmedina.com/
---REMOVE-FOOTER-WHEN-REPLYING
Questions? Visit http://www.sdml.org
Anyone ever use Gabriel Ultra struts and shocks?
Thanks,
Marc Medina
www.marcmedina.com http://www.marcmedina.com/
---REMOVE-FOOTER-WHEN-REPLYING
Questions? Visit http://www.sdml.org/
To be removed, visit http://www.sdml.org/pages/leave.html
There is a 4 degree difference between the two, but I don't remember
which way. The best way is to get a degree wheel and a dial
indicator..
Marc
www.marcmedina.com
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent:
TWO WORDS - TURBOS UNLEASHED After experiencing engine damage from a
crappy computer, they are the ONLY people I would recommend for a TD
computer! Call Chris at 602-76boost
Thanks,
Marc Medina
www.marcmedina.com = updated 8/30/05
- Original Message -
From: Travis Smith
. Got a
shipping confirmation (tires had left the building) at 2:30PM. UPS delivered
them Thursday at 11:21 AM.
Tire Rack is just awesome!!
Thanks,
Marc Medina
www.marcmedina.com = updated 8/30/05
---REMOVE-FOOTER-WHEN-REPLYING
Questions? Visit
to
help:
http://www.mrmetric.com/
Thanks,
Marc Medina
www.marcmedina.com = updated 8/30/05
- Original Message -
From: Sean B. [EMAIL PROTECTED]
To: SDML [EMAIL PROTECTED]
Sent: Thursday, September 01, 2005 7:31 AM
Subject: SD Arp head studs-- installation question
Just
lock tite on the studs where they go in and anti-seize on the end the nuts
go on to
Thanks,
Marc Medina - www.marcmedina.com updated 8/22/05
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, August 23, 2005 8:52 AM
Subject: SD Exhaust studs Lok-tite
Measure and sew. Just make sure to use a soft lining so it doesn't scratch
the glass.
Thanks,
Marc Medina - www.marcmedina.com updated 8/22/05
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, August 22, 2005 1:09 PM
Subject: SD T-Top Bags?
well
Anyone have a cheap set of 15 5 lug wheels nearby me? I'm an hour north of
San Francisco. Trying to avoid shipping charges.
Thanks,
Marc Medina - www.marcmedina.com updated 8/9/05
---REMOVE-FOOTER-WHEN-REPLYING
Questions? Visit http
They are standard Bosch o-rings. Any store that carries Bosch stuff and has
a paper catalog should be able to help you.
Thanks,
Marc Medina - www.marcmedina.com updated 8/9/05
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, August 12, 2005 12:55 AM
. See the Understanding Solenoids page for
information about how to test and repair solenoids
Thanks,
Marc Medina - www.marcmedina.com now with Shelby Dodge stuff!
- Original Message -
From: [EMAIL PROTECTED]
To: SDML [EMAIL PROTECTED]
Sent: Friday, August 05, 2005 11:43 AM
Subject
with 1 and a half CUPS of crap I
had scraped out of the pan.
I tried the same thing with my oil pickup too, but there was still junk in
it. Just go buy one at the dealer - I think it was about $30.
Thanks,
Marc Medina - www.marcmedina.com now with Shelby Dodge stuff!
- Original Message
Sounds more like the calipers and maybe the master cylinder than the prop
valve.
Thanks,
Marc Medina - www.marcmedina.com now with Shelby Dodge stuff!
- Original Message -
From: Mike Fisher [EMAIL PROTECTED]
To: sdml [EMAIL PROTECTED]
Sent: Monday, August 01, 2005 8:59 AM
Subject
You can also drill and tap it with a small hole, install a grease fitting
and press it out that way.
Thanks,
Marc Medina - www.marcmedina.com now with Shelby Dodge stuff!
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Sent: Friday, July 29
is the guy. I'm
forwarding him a copy of this in case he didn't get it from the SD list.
Thanks,
Marc Medina - www.marcmedina.com now with Shelby Dodge stuff!
- Original Message -
From: KipK [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, July 27, 2005 8:18 AM
Subject: SD
of trial and error research and
found that some brands of media simply aren't worth the plastic they're made
of. If what you're doing doesn't work, change it and see if that fixes the
problem, right?
Thanks,
Marc Medina - www.marcmedina.com
http://www.geocities.com/mcm95403 updated 5/31/05
It's the brand of cd, not the speed you burn it at. The Memorex ones I
use burn at 48X and work just fine.
Thanks,
Marc Medina www.marcmedina.com
http://www.geocities.com/mcm95403 = Updated 5/31/05
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf
I got mine from a 3.0 Caravan. FYI, it will bolt on to a 2 pc intake
without machining the inlet. Obviously it won't flow well, but it will
bolt on and run. If you don't have an intercooler, you'll need to
convert. The larger throttle body is too big for the T1 pressure hose.
If you need to get
Why not just buy a 58 mm off a 3.8 liter van? a lot cheaper and easier.
Thanks,
Marc Medina - www.marcmedina.com
http://www.geocities.com/mcm95403 updated 5/31/05
- Original Message -
From: Geyer, Michael R (PPT) [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, July 11, 2005
Not me.
Thanks,
Marc Medina - www.marcmedina.com
http://www.geocities.com/mcm95403 updated 5/31/05
- Original Message -
From: Richard Paul [EMAIL PROTECTED]
To: SDML [EMAIL PROTECTED]
Sent: Monday, July 11, 2005 11:25 AM
Subject: SD spam block?
I am having trouble posting due
Not sure of the years, but I think it's the later 3.8 vans and maybe
Intrepids.
Bueller..Bueller..Bueller..anybody???
Thanks,
Marc Medina - www.marcmedina.com
http://www.geocities.com/mcm95403 updated 5/31/05
- Original Message -
From: Eric . [EMAIL PROTECTED]
Cc
AWESOME and so true!
Marc
From: Johnny Spiva [EMAIL PROTECTED]
To: shelby-dodge@imagicomm.com
Subject: SD PolyBushings in Magazine
Date: Sat, 09 Jul 2005 14:46:13 +
Did you see? My stuff has a small write up in Oct 2005 issue
of Mopar Action Magazine. It is on page 88.
He says they are
Yep, just ask at your local parts store.
Thanks,
Marc Medina - www.marcmedina.com
http://www.geocities.com/mcm95403 updated 5/31/05
- Original Message -
From: Big Boy Hart [EMAIL PROTECTED]
To: SDML [EMAIL PROTECTED]
Sent: Wednesday, June 22, 2005 2:28 PM
Subject: SD new air
If one or the other is bad, they should still be replaced as a pair. That
way you don't pump whatever crap is in the old part into the new one.
Thanks,
Marc Medina
http://www.geocities.com/mcm95403 updated 5/31/05
- Original Message -
From: [EMAIL PROTECTED]
To: SDML [EMAIL
Hi Bob,
I know the feeling - trust me. I did the rack in my Spirit when I had the
engine out. To pull the engine I had already dropped the k-member so it
wasn't too big a deal to swap it. the worst part is the pin where the rack
connects to the steering column. Dropping the cross member down
12 X 1.5 MM - metric
Thanks,
Marc Medina
http://www.geocities.com/mcm95403 updated 5/31/05
- Original Message -
From: Robert Meier [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, June 14, 2005 2:24 PM
Subject: SD lug nut size
what thread size are our lug nuts
I would also drain the anti-freeze and replace it with as much straight
water as possible, adding a bottle of Redline Water Wetter. That should help
drop the temps considerably.
Thanks,
Marc Medina
http://www.geocities.com/mcm95403 updated 5/31/05
- Original Message -
From
Wish I was close to MT!
Thanks,
Marc Medina
http://www.geocities.com/mcm95403 updated 5/31/05
- Original Message -
From: Jeff Mulz [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, June 09, 2005 9:33 AM
Subject: Re: SD GLH Question
If anyone is interested there is a GLH
Can you send a link to one of your auctions?
Thanks,
Marc Medina
http://www.geocities.com/mcm95403 updated 5/31/05
- Original Message -
From: Robert Carmel Willis [EMAIL PROTECTED]
To: shelby-dodge@imagicomm.com
Sent: Monday, June 06, 2005 8:21 AM
Subject: SD Shelby Dodge Spirt R
Cool shovel you've got there!
Thanks,
Marc Medina
http://www.geocities.com/mcm95403 updated 5/31/05
- Original Message -
From: Ian . . . . [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, June 06, 2005 2:13 PM
Subject: Re: SD shelby mentioned
I was curious and went digging
Yup
Thanks,
Marc Medina
http://www.geocities.com/mcm95403 updated 5/31/05
- Original Message -
From: Eric . [EMAIL PROTECTED]
To: Ian . . . . [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Monday, June 06, 2005 2:23 PM
Subject: Re: SD shelby mentioned
There are SO MANY ERRORS
OOPS! The link was spelled wrong - sorry!
Thanks,
Marc Medina
http://www.geocities.com/mcm95403 updated 4/25/05
---REMOVE-FOOTER-WHEN-REPLYING
Questions? Visit http://www.sdml.org/
To be removed, visit http://www.sdml.org/pages/leave.html
Finally updated my page!
Thanks,
Marc Medina
http://www.geocites.com/mcm95403 = Updated 5/31/05
---REMOVE-FOOTER-WHEN-REPLYING
Questions? Visit http://www.sdml.org/
To be removed, visit http://www.sdml.org/pages/leave.html
I have a copy of an article on the new 89 Spirit with a side bar story on
the Shelby Spirit. It's a standard ES turbo model with a 16V Lotus head
2.2 that makes 225 hp - 2 years before the Spirit R/T's went into
production.
Thanks,
Marc Medina
http://www.geocities.com/mcm95403 updated 4/25
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItemcategory=10076item=
4552241224rd=1
Thanks,
Marc Medina
http://www.geocities.com/mcm95403 updated 4/25/05
---REMOVE-FOOTER-WHEN-REPLYING
Questions? Visit http://www.sdml.org
- as well as a Cometic head gasket.
Thanks,
Marc Medina
http://www.geocities.com/mcm95403 updated 4/25/05
- Original Message -
From: Geyer, Michael R (PPT) [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, May 25, 2005 5:52 AM
Subject: SD Slightly melted pistons!!
Finally got
,
while you have it this far apart you might as well change the timing belt
too.
Thanks,
Marc Medina
http://www.geocities.com/mcm95403 updated 4/25/05
- Original Message -
From: Chris VanKauwenberg [EMAIL PROTECTED]
To: Shelby Dodge [EMAIL PROTECTED]
Sent: Monday, May 23, 2005 3:03 PM
Anyone have a damaged one? I'm looking to get a passenger side tank off one. I
want to see if I can replace the drivers side tank with a passenger side tank
to make the hose routing cleaner.
Thanks,
Marc Medina
http://www.geocities.com/mcm95403 updated 4/25/05
---REMOVE
about that, try researching how many
strips there were 30 years ago and how many are left.
Thanks,
Marc Medina
http://www.geocities.com/mcm95403 updated 4/25/05
- Original Message -
From: Paul McGovern [EMAIL PROTECTED]
To: shelby-dodge@imagicomm.com
Sent: Tuesday, May 10, 2005 1:31
Not mine, but looks nice:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItemcategory=6210item=4
546043405rd=1
Thanks,
Marc Medina
http://www.geocities.com/mcm95403 updated 4/25/05
---REMOVE-FOOTER-WHEN-REPLYING
Questions? Visit http
Yeah, these keep coming up for sale every few months, but no one has the
money I guess.
Thanks,
Marc Medina
http://www.geocites.com/mcm95403
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Rich Bryant
Sent: Friday, April 29, 2005 5:12 PM
To: shelby
I think so, but a local glass shop could tell you for sure.
Thanks,
Marc Medina
http://www.geocities.com/mcm95403 updated 4/25/05
- Original Message -
From: Shad Burkiett [EMAIL PROTECTED]
To: shelby-dodge@imagicomm.com
Sent: Thursday, April 28, 2005 4:29 PM
Subject: SD Windshields
Gee, and I thought that was my idea! :P
Thanks,
Marc Medina
http://www.geocities.com/mcm95403 updated 4/25/05
- Original Message -
From: Brian Schulteis [EMAIL PROTECTED]
To: shelby-dodge@imagicomm.com
Sent: Tuesday, April 26, 2005 11:51 AM
Subject: Re: SD P body power windows
Any codes from the computer?
Thanks,
Marc Medina
http://www.geocities.com/mcm95403
- Original Message -
From: Home [EMAIL PROTECTED]
To: Shelby Dodge [EMAIL PROTECTED]
Sent: Monday, April 25, 2005 9:46 AM
Subject: SD Re: Crank no start
Hi All ;
Still have Crank no start condition
the driveability is. Gonna be twistin
wrenches hard this weekend to get the Spirit back on the road!
BTW, Chris at Turbos Unleashed has been great to deal with! Turbonetics could
really use some customer service lessons from him!
Thanks,
Marc Medina
http://www.geocities.com/mcm95403
Don't want the cast pistons to go BOOM!
Thanks,
Marc Medina
http://www.geocites.com/mcm95403
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Saturday, April 23, 2005 4:23 PM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: Re: SD turbos Unleashed
,
Marc Medina
http://www.geocities.com/mcm95403
- Original Message -
From: Travis Smith [EMAIL PROTECTED]
To: shelby-dodge@imagicomm.com
Sent: Wednesday, April 20, 2005 8:02 AM
Subject: SD turbo question
I have a 92 2.5L IROC Daytona running a stock mitsu turbo. Im looking
into buying
Was it a sudden loss of pressure or gradual? If it's sudden something broke,
if it's gradual then the engine is wearing out - generally speaking of
course.
Thanks,
Marc Medina
http://www.geocities.com/mcm95403
- Original Message -
From: [EMAIL PROTECTED]
To: shelby-dodge@imagicomm.com
The guy selling the shocks on e-bay doesn't have struts. Thanks to everyone
who took the time to check into this avenue though.
Thanks,
Marc Medina
http://www.geocities.com/mcm95403
- Original Message -
From: Will Martin [EMAIL PROTECTED]
To: [EMAIL PROTECTED]; shelby-dodge@sdml.org
Sent
Wow, that's great to know! You should post this to the Team Omni list too.
Thanks,
Marc Medina
http://www.geocities.com/mcm95403
- Original Message -
From: Mike Fisher [EMAIL PROTECTED]
To: shelby-dodge@imagicomm.com
Sent: Monday, April 04, 2005 9:16 AM
Subject: Re: SD 6 Bolt Flexplate
since the cleaner doesn't burn, and will kill the engine if you do it at
idle. From there, see how it runs and then you will have a better starting
point to make other repairs.
Thanks,
Marc Medina
http://www.geocities.com/mcm95403
- Original Message -
From: [EMAIL PROTECTED]
To: shelby-dodge
Super60) since that filter stand up so high that the fittings that come with
the braided lines won't work.
You can get your hand it there, it's just awkward.
If your hands are too big, maybe you could ask your wife/GF etc., to do it
if her hands are smaller
Thanks,
Marc Medina
http
Amazing how that kind of thing happens isn't it? Good to have you back in
the fold.
Thanks,
Marc Medina
http://www.geocities.com/mcm95403
- Original Message -
From: Peter Paulson [EMAIL PROTECTED]
To: shelby-dodge@sdml.org
Cc: [EMAIL PROTECTED]
Sent: Friday, March 25, 2005 12:19 PM
Hi Chad,
AutoZone carries these. I just got a set for my Spirit a few months ago.
Just have them look up an 89 Daytona Shelby with 16 wheels and rear discs.
Thanks,
Marc Medina
http://www.geocities.com/mcm95403
- Original Message -
From: [EMAIL PROTECTED]
To: shelby-dodge@imagicomm.com
/tested by a good shop. If you don't know of one, the local dealer
should be able to do it or point you to someone who can.
Thanks,
Marc Medina
http://www.geocities.com/mcm95403
- Original Message -
From: Home [EMAIL PROTECTED]
To: Shelby Dodge shelby-dodge@sdml.org
Sent: Thursday, March 24
As long as we are helping each other, it doesn't matter. Better 10 answers
all the same than none.
Thanks,
Marc Medina
http://www.geocities.com/mcm95403
- Original Message -
From: Ed Nickl [EMAIL PROTECTED]
To: Ed Nickl [EMAIL PROTECTED]; Home [EMAIL PROTECTED];
Shelby Dodge shelby-dodge
the cranking
compression should be, then you need to find a more experienced machinist -
period, end of conversation. Bearing failure like that sounds more like an
oiling problem than anything else.
Thanks,
Marc Medina
http://www.geocities.com/mcm95403
- Original Message -
From: Jason Arroyo [EMAIL
ARGH! Sounds VERY Familiar! Bet it's the turbo.
Thanks,
Marc Medina
---REMOVE-FOOTER-WHEN-REPLYING
Questions? Visit http://www.sdml.org/
To be removed, visit http://www.sdml.org/pages/leave.html
AMEN!
Thanks,
Marc Medina
- Original Message -
From: Jeff Mulz [EMAIL PROTECTED]
To: shelby-dodge@sdml.org
Sent: Thursday, January 27, 2005 1:03 PM
Subject: SD White Valve Covers
Haven't you guys beat the topic to death about this??
I'm sick of getting 20-50 post a day on whether
Hate to screw everyone up, but my old 85 SC had a painted off white valve
cover. My friends mom bought it new, so I know it was factory.
Marc Medina
www.pnw-sdac.org
89 Spirit ES 2.5 Turbo Intercooled Super60
http://www.geocities.com/mcm95403/ --- updated 11/12/04
-Original Message
=STRK:MESE:IT
Thanks,
Marc Medina
---REMOVE-FOOTER-WHEN-REPLYING
Questions? Visit http://www.sdml.org/
To be removed, visit http://www.sdml.org/pages/leave.html
rebuild - it would have been
much cheaper to put in more expensive oil and change it often!
Thanks,
Marc Medina
---REMOVE-FOOTER-WHEN-REPLYING
Questions? Visit http://www.sdml.org/
To be removed, visit http://www.sdml.org/pages/leave.html
Penzoil SUCKS! I'd be willing to bet that you've got about 1,000 miles since
you put the Penz in. You're hearing the clattering because it's already
broken down and not lubricating. Castrol is good, Kendal is better,
Synthetic is best.
Thanks,
Marc Medina
- Original Message -
From
be crack free. $40
89 turbo valve cover for one piece gasket (o-ring style) $5
All prices plus hipping from 95403 (California). Pics available on request.
Marc Medina
www.pnw-sdac.org
89 Spirit ES 2.5 Turbo Intercooled Super60
http://www.geocities.com/mcm95403/ --- updated 11/12/04
OLD saying: Speed costs money son, how fast do you want to go?
Thanks,
Marc Medina
The Constitution shall never be construed to authorize Congress to prevent
the people of the United States, who are peaceable citizens, from keeping
their own arms. -Samuel Adams, debates Proceedings
Thanks Paul,
I've decided to fix whatever the problem is and sell the car. I added it up
tonight and in the last year I've spent about $8,000 on this thing. I'll be
lucky to get $3,000 for it. I should have just bought an old Mopar to start
with.
Marc Medina
www.pnw-sdac.org
89 Spirit ES 2.5
is. After it's correctly repaired it will be up for sale. If no one buys it
complete, it will get parted out and the body will go to the junkyard.
Hopefully it sells as a complete car. If anyone is interested in it after it
is repaired, let me know.
Thanks,
Marc Medina
www.pnw-sdac.org
89 Spirit ES 2.5
PROTECTED]
Senator Nell Soto Phone: (916) 445-6868 [EMAIL PROTECTED]
Senator Jackie Speier Phone: (916) 445-0503 [EMAIL PROTECTED]
Senator Tom Torlakson Phone: (916) 445-6083 [EMAIL PROTECTED]
Thanks,
Marc Medina
www.pnw-sdac.org
89 Spirit ES 2.5 Super 60 Intercooled Turbo
http
1 - 100 of 106 matches
Mail list logo
