Re: ShopTalk: SK Fiber shafts

s? I'm interested. > Thx, > Mike Phelan > 386-846-4653 > mykeyg...@aol.com > > > -Original Message- > From: John Kaufman > To: ShopTalk ; SpinetalkersForum > > Sent: Fri, Nov 30, 2018 1:10 pm > Subject: ShopTalk: SK Fiber shafts > > Hi Guys, >

Re: ShopTalk: SK Fiber shafts

half price and less for the pulls. > > John > >> On Nov 30, 2018, at 1:15 PM, myKey Phean wrote: >> >> John, >> Mykey Phelan here. What's the deal with the SK shafts? I'm interested. >> Thx, >> Mike Phelan >> 386-846-4653 >&g

RE: ShopTalk: SK Fiber shafts

om] On Behalf Of John Kaufman Sent: Saturday, December 1, 2018 9:16 AM To: ShopTalk@mail.msen.com Subject: Re: ShopTalk: SK Fiber shafts Hi Mikey, I have some SK’s mostly new, some pulls. In irons they’re TT8-0’s mostly A flex and few 90’s and 95’s S flex. The woods are Lite Rev1’s and

Re: ShopTalk: SK Fiber shafts

g...@aol.com > > > -Original Message- > From: John Kaufman > To: ShopTalk ; SpinetalkersForum > > Sent: Fri, Nov 30, 2018 1:10 pm > Subject: ShopTalk: SK Fiber shafts > > Hi Guys, > > As I’ve posted before my Club Scout analyzer business has been sol

Re: ShopTalk: SK Fiber shafts

John, Mykey Phelan here. What's the deal with the SK shafts? I'm interested.Thx,Mike phelan386-846-4653mykeyg...@aol.com -Original Message- From: John Kaufman To: ShopTalk ; SpinetalkersForum Sent: Fri, Nov 30, 2018 1:10 pm Subject: ShopTalk: SK Fiber shafts Hi Guys, As I

ShopTalk: SK Fiber shafts

-- Shoptalk ** Sponsored by the new Aldila Voodoo. Learn more at http://aldilavoodoo.com/

Re: ShopTalk: Club Scout analyzer business sale

Hi John, best of luck on your health issues.   I use your unit almost daily, and have for nearly 20 years now, I used it today along with a laser tip weight I got from you.   Thanks for your contributions to me and our community.   David   In a message dated 7/9/2018 7:36:14 AM Pacific Standard Ti

Re: ShopTalk: Club Scout analyzer business sale

I’ve had mine for 15 yrs. still going strong. Good luck and God Bless you sir. > On Jul 9, 2018, at 10:05 AM, John Kaufman wrote: > > Hi Folks, > > I posted a note some time back that I was putting my Club Scout analyzer > business up for sale due to a health issue. I have al lung conditi

Re: ShopTalk: Club Scout analyzer business sale

keyg...@aol.com -Original Message- From: John Kaufman To: ShopTalk ; SpinetalkersForum Sent: Mon, Jul 9, 2018 10:36 am Subject: ShopTalk: Club Scout analyzer business sale Hi Folks, I posted a note some time back that I was putting my Club Scout analyzer business up for sale due to a health is

ShopTalk: Club Scout analyzer business sale

Hi Folks, I posted a note some time back that I was putting my Club Scout analyzer business up for sale due to a health issue. I have al lung condition called idiopathic pulmonary fibrosis.. The first term means they have no idea what caused it since I’ve never smoked and have not worked in

ShopTalk: Club Scout Analyzers

, John Kaufman j...@csfa.com-- Shoptalk ** Sponsored by the new Aldila Voodoo. Learn more at http://aldilavoodoo.com/

Re: ShopTalk: Shoptalk

I think those are somehow on Yahoo. I won’t touch those for now. John > On Nov 29, 2017, at 10:49 AM, André Cantin wrote: > > Love the archives on shoptalk. Would they be available on Facebook? > > Thanks. > > André > > From: John Muir <> > Sent: Tue

Re: ShopTalk: Shoptalk

I added a new closed group yesterday (the other is my Clubmaker Online facebook page. Here’s the new Shoptalk facebook closed group https://www.facebook.com/groups/1886250558370668/?source=create_flow <https://www.facebook.com/groups/1886250558370668/?source=create_flow> John >

Re: ShopTalk: Shoptalk

Love the archives on shoptalk. Would they be available on Facebook? Thanks. André From: John Muir Sent: Tuesday, November 28, 2017 5:15 PM To: ShopTalk@mail.msen.com Subject: ShopTalk: Shoptalk I’m winding down some of my really old Clubmaker Online stuff and organizing things a bit. There

Re: ShopTalk: Shoptalk

I am all for facebook, most of us are already on that site. On Tuesday, November 28, 2017 4:18 PM, John Muir wrote: I’m winding down some of my really old Clubmaker Online stuff and organizing things a bit. There hasn’t been a lot of Shoptalk action  the past few years. I asked my

RE: ShopTalk: Re: [SpinetalkersForum] NeuFinder documentation now publicly available

From: owner-shopt...@mail.msen.com [mailto:owner-shopt...@mail.msen.com] On Behalf Of Ed Reeder Sent: Tuesday, November 28, 2017 9:40 PM To: Dave Tutelman d...@tutelman.com [SpinetalkersForum] ; NF4 Public forum ; NeuFinder Forum ; ShopTalk ; Russ Ryden Subject: ShopTalk: Re: [Spinetalker

Re: ShopTalk: Shoptalk

I vote for Face Book closed Sent from my iPad by Don W > On Nov 28, 2017, at 4:15 PM, John Muir wrote: > > I’m winding down some of my really old Clubmaker Online stuff and organizing > things a bit. There hasn’t been a lot of Shoptalk action the past few years. > I asked

ShopTalk: Re: [SpinetalkersForum] NeuFinder documentation now publicly available

As an NF4 builder/owner let me say that this device is invaluable to the club builder. Especially if you are trying to build a club to match/replace/fit-in-with- existing club(s). At present I seldomly building clubs, but when I do the NF4 is an integral part of what I do. It is, especially with

ShopTalk: Shoptalk

I’m winding down some of my really old Clubmaker Online stuff and organizing things a bit. There hasn’t been a lot of Shoptalk action the past few years. I asked my ISP to check on how much I can save if I discontinue Shoptalk. If there is enough interest and the expense isn’t much I’d

ShopTalk: Alpha V5 Hybrid

Anyone have a new #3 19 deg Alpha V5 hybrid they’d like to part with? Alpha only has #4 and up in stock. :-( Thanks! John Muir clubmaker-online.com 810.923.7396 http://mkt.com/john-muir-golf-company -- Shoptalk ** Sponsored by the new Aldila Voodoo. Learn more at http://aldilavoodoo.com/

Re: ShopTalk: Fairway wood

OK, thanks John.  I'll take it off list from here. -Don M From: John Muir To: ShopTalk@mail.msen.com Sent: Monday, July 17, 2017 8:54 AM Subject: Re: ShopTalk: Fairway wood I should add that the Wave shaft is 46” and works great with this head. Plenty of room for 45” with 1

Re: ShopTalk: Fairway wood

I should add that the Wave shaft is 46” and works great with this head. Plenty of room for 45” with 1” tip trim on this one. Loft is 16 on the #3. John > On Jul 17, 2017, at 9:24 AM, John Muir wrote: > > > > Yes, $49.95 each (add $10 if you need head cover). > I’d have to included it with my

ShopTalk: Fairway wood

Yes, $49.95 each (add $10 if you need head cover). I’d have to included it with my next order, I have to have a few orders at a time to save shipping cost. It’s a great head, maraging steel. Send me an email at j...@clubmaker-online.com to for order instruc

ShopTalk: Paging John at Clubmaker Online. Hiskei FW heads

John, Is the lightweight HK fairway wood still current?  Any feedback on them?I want to try a 44 or maybe 45 inch club that is the size and loft of a regular 3 or 4 wood.  It will be used only on the tee, plus maybe on very good lies sitting up. -Don M

ShopTalk: Wishon PCF wide sole 60*

Does anyone have a Wishon PCF wide sole 60* wedge they are willing to part with? I have a customer that would like the lob wedge to compliment his 55* sand wedge. It isn't available through Diamond International currently. Thanks, Moe Moe Hickey Clubs By Moe 953 St Johns Dr. Annapolis, M

Re: ShopTalk: super flat wedge

shoptalk > On Feb 6, 2017, at 8:04 PM, Frank Hann Engineered Golf > wrote: > > Try these clubs from Bang Golf for disabled golfers who play seated. > > http://www.banggolf.com/prodgroup.asp?cat=IRNTOT > <http://www.banggolf.com/prodgroup.asp?cat=IRNTOT> >

Re: ShopTalk: super flat wedge

n insert that allows it to be bent very flat (he plays > from a seated position). > Any ideas? > > I play from a seated position and play discontinued RTS flatened hosel golf > clubs. What would be the best venue to advertise for requests of interest in > construction of a gap

Re: ShopTalk: super flat wedge

Just an idea: I have seen irons with the shaft bonded to a pin that goes INSIDE the shaft. Many putters use this type of connection.Considering that the amount of stress on a gap wedge isn't likely to be great (and despite the fact that modern iron shafts are both designed and intended to go I

Re: ShopTalk: super flat wedge

phite (sanded to fit tapered hosel) > > > -Original Message- > From: John Muir > To: ShopTalk > Sent: Mon, Feb 6, 2017 6:47 am > Subject: ShopTalk: super flat wedge > > A visitor to my web site is looking for a super flat gap wedge. He had a sand > wedge made and it has a

Re: ShopTalk: super flat wedge

Perhaps you could check with this guy if he’s still around. He was selling RTS woods http://www.mikescustomgolf.com/rtswoods.htm From: John Muir Sent: Monday, February 06, 2017 9:47 AM To: ShopTalk@mail.msen.com Subject: ShopTalk: super flat wedge A visitor to my web site is looking for a

Re: ShopTalk: super flat wedge

adapter to fit the new shaft. Old head >is most likely forged (easy bend) and is a tapered shaft so boring is needed. >The new shaft appears to be graphite (sanded to fit tapered hosel) -Original Message- From: John Muir To: ShopTalk Sent: Mon, Feb 6, 2017 6:47 am Subject: Sh

ShopTalk: super flat wedge

best venue to advertise for requests of interest in construction of a gap wedge Thanks, John Muir shoptalk clubmaker-online.com 810.923.7396 http://mkt.com/john-muir-golf-company

RE: ShopTalk: How to Remove a PING CTP from head?

I've seen some info on removing i25 weights. Little bit of heat along the bottom of the face and sole, few seconds at a time, and gently pry the weight out. On Jan 28, 2017, 1:41 AM -0600, Studio | Golf DNA , wrote: > > Hi All, > > > > > > I have a bunch of Ping i20 heads that I pulled from comp

RE: ShopTalk: How to Remove a PING CTP from head?

Hi All, I have a bunch of Ping i20 heads that I pulled from complete sets and a set of S55 heads. Is there a method to remove the Custom Tuning Port (CTP) without sending back to Ping? I want to change some head weights, so I have minimal lead plug weights down the hosel. I know for as

RE: ShopTalk: My experience with single length irons

sand wedge for him. Thanks, Moe From: owner-shopt...@mail.msen.com [mailto:owner-shopt...@mail.msen.com] On Behalf Of Bob Barrette Sent: Saturday, January 21, 2017 11:58 AM To: Spine Talk ; Shop Talk Shop ; Spine Talk Subject: ShopTalk: My experience with single length irons Hi All

Re: ShopTalk: Looking for PING shafts (pullouts) stiff flex - possible trade ...

ebay. -Don M From: Ron Blanchard To: ShopTalk@mail.msen.com Sent: Tuesday, December 27, 2016 3:49 PM Subject: ShopTalk: Looking for PING shafts (pullouts) stiff flex - possible trade for regular Hi, I am looking for a set of eight PING stiff

Re: ShopTalk: Looking for PING shafts (pullouts) stiff flex - possible trade for regular

If you don't have any luck here, they often are available on ebay. -Don M From: Ron Blanchard To: ShopTalk@mail.msen.com Sent: Tuesday, December 27, 2016 3:49 PM Subject: ShopTalk: Looking for PING shafts (pullouts) stiff flex - possible trade for regular #yiv6911488748

ShopTalk: Looking for PING shafts (pullouts) stiff flex - possible trade for regular

Hi,I am looking for a set of eight PING stiff flex shafts at standard or +1/2 length. Okay if CFS or AWT, or let me know what you have.I may also be interested in other pulled sets (S300 etc), don't have to be PING but will need taper tip.I have a set of CFS in regular flex available for possib

Re: ShopTalk: Need to cover hotmelt hole.

> the head sole down so the epoxy settles down against the smooth tape. A > modest amount of Scotch Brite or linen ferrule belt buffing and you are good > to go. > From: owner-shopt...@mail.msen.com on behalf > of Mats Bengtsson > Sent: Wednesday, November 16, 2016 8:50:58 A

RE: ShopTalk: Need to cover hotmelt hole.

en.com [mailto:owner-shopt...@mail.msen.com] On Behalf Of Mats Bengtsson Sent: November-16-16 11:09 AM To: ShopTalk@mail.msen.com Subject: Re: ShopTalk: Need to cover hotmelt hole. Thanks! I was thinking along the same lines with tape or plastic film and epoxy. I will check if I can find s

Re: ShopTalk: Need to cover hotmelt hole.

> the head sole down so the epoxy settles down against the smooth tape. A > modest amount of Scotch Brite or linen ferrule belt buffing and you are good > to go. > > > From: owner-shopt...@mail.msen.com on behalf > of Mats Bengtsson > Sent: Wednesday, Novembe

Re: ShopTalk: Need to cover hotmelt hole.

good to go. From: owner-shopt...@mail.msen.com on behalf of Mats Bengtsson Sent: Wednesday, November 16, 2016 8:50:58 AM To: ShopTalk@mail.msen.com Subject: ShopTalk: Need to cover hotmelt hole. Hi I have a head with a 3 mm hole in it, probably a hotmelt hole

Re: ShopTalk: Need to cover hotmelt hole.

... | | | | -Don M From: Mats Bengtsson To: ShopTalk@mail.msen.com Sent: Wednesday, November 16, 2016 8:50 AM Subject: ShopTalk: Need to cover hotmelt hole. Hi I have a head with a 3 mm hole in it, probably a hotmelt hole, but I don´t need that, so how do I plug it? I tried with golf club

Re: ShopTalk: Need to cover hotmelt hole.

Plug the hole with a tapered plastc plug. Secure with epoxy (use small amount). You can use an old toothbrush handle to make the plug. Sent from AOL Mobile Mail -Original Message- From: Mats Bengtsson To: ShopTalk Sent: Wed, Nov 16, 2016 07:08 AM Subject: ShopTalk: Need to cover

ShopTalk: Need to cover hotmelt hole.

Hi I have a head with a 3 mm hole in it, probably a hotmelt hole, but I don´t need that, so how do I plug it? I tried with golf club glue but that was a bit too runny, so it was hard to get it to stay. Any good suggestions would be appreciated. Regards Mats B-- Shoptalk ** Sponsored by the

ShopTalk: TOSKI TARGET

I am on the scrounge. I have an old veteran looking for a LH Toski Target SW. He holds down a 2 handicap and I can remember building him these clubs in 1995. He still hits them well and according to him, he can't hit anything else. I know exactly what he means because I also play with LH Tos

Re: ShopTalk: Pinhawk Irons

Hi Bob, 36 grams? Where? Thanks Sent from my iPhone > On Nov 14, 2016, at 9:09 PM, Bob Barrette wrote: > > Hi All: > I made myself a set 4 through pitching wedge, 37" long. > I hit my wedge, nine, 8 irons fat. > My 4 and 5 irons we're better, but much lower than my previous set. > My previous s

RE: ShopTalk: Interesting Golf Digest Snippet

: shoptalk@mail.msen.com Subject: ShopTalk: Interesting Golf Digest Snippet Here’s a snippet from Golf Digest’s article about Ron Pampling’s clubs this past weekend. "Interestingly, according to Srixon, they almost never use hosel plugs in builds as it can throw off the center of gr

Re: ShopTalk: Interesting Golf Digest Snippet

Pretty easy to find out if it makes a difference whatsoever. Find the COG and then add 4 grams inside the hosel. If it falls off or won’t stay balanced then you have your answer. Pic from : http://www.golfwrx.com/forums/topic/909991-diy-driver-tune-up-diy-fitting/page__hl__%20diy%20%20driver%20%2

Re: ShopTalk: Interesting Golf Digest Snippet

15 years of fitting I've seen many that it makes a huge difference and many that it makes no difference at all. Of course everything in between. With some I've seen 2 grams make a significant difference. Based on my experience it depends on the golfer. That is why I test everyone for changes in

Re: ShopTalk: Interesting Golf Digest Snippet

IIRC TWW has said multiple times that this amount of weight has almost zero effect on a club's CG. In fact, that is one of the reasons that the small adjustment weights have no discernible effect on ball flight. Again, IIRC, it takes on the order of 20+ grams to have any effect. I'd find you a r

Re: ShopTalk: Interesting Golf Digest Snippet

I know some Pro's say they can feel 1 rpm difference in shaft flex, so they may be able to feel the extra weight in the wrong place. That said a 12 Hcp & above - nooo way! George HusonByGeorge Custon Clubs On Monday, November 7, 2016 1:48 PM, Steve Longeway wrote: Here’s a snippet fro

ShopTalk: Interesting Golf Digest Snippet

Here’s a snippet from Golf Digest’s article about Ron Pampling’s clubs this past weekend. "Interestingly, according to Srixon, they almost never use hosel plugs in builds as it can throw off the center of gravity location and the balance of the clubface. If clubs need additional weight they w

Re: ShopTalk: Ferrule Finishing

Bob, Moe has it right and you can use paper towel instead of cotton cloth with good success. Apply little to no pressure for best results. From: owner-shopt...@mail.msen.com on behalf of clubsbymoe Sent: Saturday, October 29, 2016 5:32:35 PM To: ShopTalk@mail

Re: ShopTalk: Ferrule Finishing

e as described above to smooth. -Original Message- From: clubsbymoe To: ShopTalk@mail. msen. com Sent: Sat, Oct 29, 2016 3:32 pm Subject: Re: ShopTalk: Ferrule Finishing Bob, Acetone on a cotton cloth will shape and shine. Soak the cloth and rub like you were shining a shoe. If the ferru

Re: ShopTalk: Ferrule Finishing

ntly wiping will bring the shine up. Moe Sent from my Verizon 4G LTE smartphone Original message From: Bob Barrette Date: 10/29/16 6:04 PM (GMT-05:00) To: ShopTalk@mail.msen.com Subject: Re: ShopTalk: Ferrule Finishing I was kind of hoping, there was some chemical that

Re: ShopTalk: Ferrule Finishing

oth gently wiping will bring the shine up. Moe Sent from my Verizon 4G LTE smartphone Original message From: Bob Barrette Date: 10/29/16 6:04 PM (GMT-05:00) To: ShopTalk@mail.msen.com Subject: Re: ShopTalk: Ferrule Finishing I was kind of hoping, there was some che

Re: ShopTalk: Ferrule Finishing

al message From: Bob Barrette Date: 10/29/16 6:04 PM (GMT-05:00) To: ShopTalk@mail.msen.com Subject: Re: ShopTalk: Ferrule Finishing I was kind of hoping, there was some chemical that one could rub on it and it would shape and shine it. No such luck I guess. Bob Sent from Yah

Re: ShopTalk: Ferrule Finishing

I've been using a DuraBrite on a 1x30 with a dedicated stand and it's light years ahead of the old linen belt I used 20 years ago. Still easier to just match sizes though. Significantly less "artwork" involved. Sent from my iPhone > On Oct 29, 2016, at 3:39 PM, Ed Reeder wrote: > > Bob, > I'

Re: ShopTalk: Ferrule Finishing

Bob, I'm curious what others will say. Not to be a smart ass (even though I have been accused of it in the past) but the best thing I've found is to use ferrules that have the same diameter as the iron/wood shaft. Wishon has taken that approach and it works quite well and doesn't take any specia

Re: ShopTalk: Graphite Iron Shafts, L or A flex

Love the Paderson shafts. (Sorry - not budget friendly) Sent from my iPhone > On Oct 26, 2016, at 5:55 PM, Don M wrote: > > What are you guys liking these days for L and A flex iron shafts? > Particularly, budget friendly ones. > > Thanks, > > Don M

ShopTalk: Graphite Iron Shafts, L or A flex

What are you guys liking these days for L and A flex iron shafts?   Particularly, budget friendly ones. Thanks, Don M

Re: ShopTalk: Single length irons

orged heads. The lies were all set dynamically and he played well with those clubs for many years. From: owner-shopt...@mail.msen.com on behalf of Ed Reeder Sent: Wednesday, October 26, 2016 10:20:44 AM To: ShopTalk@mail.msen.com Subject: Re: ShopTalk: Single l

Re: ShopTalk: Single length irons

I haven't pulled the trigger (yet) on SL irons. I strongly suggest that you go to the Wishon site and look at ALL the information on the Sterling irons. TWW has done an excellent job of educating people on playing and fitting his Sterling irons. The FAQ and Comments are illuminating. One approa

Re: ShopTalk: Single length irons

Yes.  But SL irons still simplify things.  Instead of hitting a 7 iron 2 or 3 times a round, you are hitting it 18 times. -Don From: Brandner Thomas To: ShopTalk@mail.msen.com Sent: Wednesday, October 26, 2016 8:21 AM Subject: Re: ShopTalk: Single length irons But what about the

Re: ShopTalk: Single length irons

iron. Etc. > > Oh, and forget about being locked into one ball position. You will have one > posture. But ball position is up to you, if you are good enough to play the > ball back or forward as needed. > > The good things outweigh the bad, IMO. > > -Don > >

Re: ShopTalk: Single length irons

and forget about being locked into one ball position.  You will have one posture.  But ball position is up to you, if you are good enough to play the ball back or forward as needed. The good things outweigh the bad, IMO. -Don   From: Roy Nix (AGCP) To: ShopTalk@mail.msen.com Sent: Wednesda

Re: ShopTalk: Single length irons

I have sold many sets of both Wishon Sterlings and Pinhawk irons. All golfers seem to find them more consistent and more accurate including me. They do take some adjustments and some adapt faster than others. I was once a plus handicap with a great wedge game and I am having trouble adapting t

RE: ShopTalk: Single length irons

one who is experiencing lower flight with the 5 and 6 iron. He is a smooth swinger with excellent feel, and a “tinkerer”. From: owner-shopt...@mail.msen.com [mailto:owner-shopt...@mail.msen.com] On Behalf Of Bob Barrette Sent: Tuesday, October 25, 2016 10:38 PM To: ShopTalk@mail.msen.com

RE: ShopTalk: Single length irons

roups , Shop Talk Shop Subject: ShopTalk: Single length irons Hi all Has anyone had any experience with a set of single length irons they made for a customer, or for themselves?Would you be willing to share? Regards, Bob

Re: ShopTalk: Single length irons

Yes, lots. Can't say much now but will try to write more tomorrow. I've sold about a dozen sets and I have a set. Love em! So do customers Fairways & Greens Roy Nix Golf Professional Clubfitting Professional www.agcpgolf.com www.mcnixgolf.com On 10/25/2016 7:54 PM, Bob Barrette wrote: Hi al

Re: ShopTalk: Ping TI3 help

sage dated 9/13/2016 9:18:56 A.M. Pacific Daylight Time, d...@mcluckie.net writes: This looks like a good "how to" guide. http://www.golfworks.com/images/art/HRD48.pdf -Don M ____ From: John Muir To: ShopTalk@mail.msen.com Sent: Tu

Re: ShopTalk: Ping TI3 help

how long to leave it in the shaft. > > -Don M > > > From: John Muir > To: ShopTalk@mail.msen.com > Sent: Tuesday, September 13, 2016 9:32 AM > Subject: ShopTalk: Ping TI3 help > > I received the note below from a guy looking to reshaft a Ping Ti3 fairway >

Re: ShopTalk: Ping TI3 help

This is also a really useful tool. But we’re entering into territory where maybe new fairway wood shopping would be a better use of time. http://www.mitchellgolf.com/STEELCLUB-Graphite-Shaft-Puller-Adapter-w-Sleeve.html

Re: ShopTalk: Ping TI3 help

What Don suggested or remove it altogether and replace it Sent from my iPhone > On Sep 13, 2016, at 12:31 PM, John Muir wrote: > > Ti3

Re: ShopTalk: Ping TI3 help

ages/art/HRD48.pdf> > > -Don M > > > From: John Muir > To: ShopTalk@mail.msen.com > Sent: Tuesday, September 13, 2016 9:32 AM > Subject: ShopTalk: Ping TI3 help > > I received the note below from a guy looking to reshaft a Ping Ti3 fairway > woo

Re: ShopTalk: Ping TI3 help

This looks like a good "how to" guide. http://www.golfworks.com/images/art/HRD48.pdf -Don M From: John Muir To: ShopTalk@mail.msen.com Sent: Tuesday, September 13, 2016 9:32 AM Subject: ShopTalk: Ping TI3 help I received the note below from a guy looking to reshaft

Re: ShopTalk: Ping TI3 help

From: John Muir To: ShopTalk@mail.msen.com Sent: Tuesday, September 13, 2016 9:32 AM Subject: ShopTalk: Ping TI3 help I received the note below from a guy looking to reshaft a Ping Ti3 fairway wood. Can anyone help? His email address is  classicgolf...@cfl.rr.com and his name is

ShopTalk: Ping TI3 help

I received the note below from a guy looking to reshaft a Ping Ti3 fairway wood. Can anyone help? His email address is classicgolf...@cfl.rr.com and his name is Mark. John I need some help, I have shafted ,re-shafted thousands of shafts through 25 years but I have never dealt with Ping. I

Re: ShopTalk: Loft/Lie Question

Hi Davy, While I respect your opinion I am in the Wishon camp that one degree does not make a difference for mid to high handicappers. Please reread his post posted here on Shoptalk: https://groups.yahoo.com/neo/groups/shoptalk/conversations/topics/75059 And also read post #3 on another

Re: ShopTalk: Loft/Lie Question

e machine, then use a club gauge to test the “real” loft and lie of the final product. Is this correct? Thanks for the help! Steve-- Shoptalk ** Sponsored by the new Aldila Voodoo. Learn more at http://aldilavoodoo.com/

RE: ShopTalk: Loft/Lie Question

.com [mailto:owner-shopt...@mail.msen.com] On Behalf Of Davy Sent: 5-Aug-16 2:14 PM To: ShopTalk@mail.msen.com Subject: Re: ShopTalk: Loft/Lie Question Only a fool would not listen to Tom. You'd be hard-pressed to find a handful of experts out there with his experience and knowledge. You can take wh

Re: ShopTalk: Loft/Lie Question

riday, August 5, 2016 2:14:50 PM To: ShopTalk@mail.msen.com Subject: Re: ShopTalk: Loft/Lie Question @ Davy It gets confusing. So many claims out there. Dynamic lie fitting or ink line drawn to the back of the ball: http://www.golfwrx.com/277293/the-best-way-to-fit-lie-angle/ or lie detector fi

Re: ShopTalk: Loft/Lie Question

hout the "test". " My pro said I " should get these adjusted 1 degree up" UP FROM WHAT? The industry "pros" often don't know up from down! Who the hell cares what your club specs are - do they work properly for you? -Original Message- From: Ste

Re: ShopTalk: Loft/Lie Question

://groups.yahoo.com/neo/groups/shoptalk/conversations/topics/75059 Rumour has it that Trevino would have his irons bent until he was satisfied with the ball flight.¸ TFlan would debate that you hardly encounter a flat lie on the real course. Maltby claims that some golfers adapt to ill fitted lies

Re: ShopTalk: Loft/Lie Question

André Cantin Sent: Friday, August 5, 2016 11:22:50 AM To: ShopTalk@mail.msen.com Subject: Re: ShopTalk: Loft/Lie Question That is what most experts say. However Mitchell claims otherwise. Take a look at page 2 of the pdf: https://www.mitchellgolf.com/pdfs/manuals/SAMI-MANUAL.pdf Your STEEL

Re: ShopTalk: Loft/Lie Question

Wishon Sent: Friday, August 5, 2016 11:07:49 AM To: ShopTalk@mail.msen.com Subject: RE: ShopTalk: Loft/Lie Question Steve You'll probably hear from others here who will tell you that you can do that accurately. But I am here to tell you as a clubhead designer since 1986 and from having cre

Re: ShopTalk: Loft/Lie Question

-Original Message- From: Steve Longeway Sent: Friday, August 05, 2016 11:27 AM To: shoptalk@mail.msen.com Subject: ShopTalk: Loft/Lie Question I have a question about loft/lie adjustments that I’m struggling with. I’ve always been under the impression that you cannot use a “bending

RE: ShopTalk: Loft/Lie Question

AM To: shoptalk@mail.msen.com Subject: ShopTalk: Loft/Lie Question I have a question about loft/lie adjustments that I’m struggling with. I’ve always been under the impression that you cannot use a “bending machine” to take accurate loft lie measurements. You were to do adjustments on the machine,

ShopTalk: Loft/Lie Question

final product. Is this correct? Thanks for the help! Steve-- Shoptalk ** Sponsored by the new Aldila Voodoo. Learn more at http://aldilavoodoo.com/

Re: ShopTalk: Re: [SpinetalkersForum] Old original putter grip

gt;> Craig >> >> From: e_ree...@mailup.net >> To: spinetalkersfo...@yahoogroups.com >> CC: tflan1...@gmail.com; ShopTalk@mail.msen.com >> Subject: ShopTalk: Re: [SpinetalkersForum] Old original putter grip >> Date: Sun, 24 Jul 2016 13:52:48 -0700 >> >> Jan,

RE: ShopTalk: Re: [SpinetalkersForum] Old original putter grip

[SpinetalkersForum] Cc: tflan1...@gmail.com; ShopTalk@mail.msen.com Subject: ShopTalk: Re: [SpinetalkersForum] Old original putter grip Jan, I am so sorry for your loss. TFlan was a wonderful (and crusty) member of this community. He willingly provided sage advice to us for years. He will be missed

Re: ShopTalk: Re: [SpinetalkersForum] Old original putter grip

sh you well! > Craig > > From: e_ree...@mailup.net > To: spinetalkersfo...@yahoogroups.com > CC: tflan1...@gmail.com; ShopTalk@mail.msen.com > Subject: ShopTalk: Re: [SpinetalkersForum] Old original putter grip > Date: Sun, 24 Jul 2016 13:52:48 -0700 > > Jan, > I am s

Re: ShopTalk: Re: [SpinetalkersForum] Old original putter grip

practical tech info to downright funny comments and quips. Jan, I'm sorry for your loss and wish you well! Craig From: e_ree...@mailup.net To: spinetalkersfo...@yahoogroups.com CC: tflan1...@gmail.com; ShopTalk@mail.msen.com Subject: ShopTal

RE: ShopTalk: Re: [SpinetalkersForum] Old original putter grip

om CC: tflan1...@gmail.com; ShopTalk@mail.msen.com Subject: ShopTalk: Re: [SpinetalkersForum] Old original putter grip Date: Sun, 24 Jul 2016 13:52:48 -0700 Jan, I am so sorry for your loss. TFlan was a wonderful (and crusty) member of this community. He willingly provided sage advice to us for

ShopTalk: Re: [SpinetalkersForum] Old original putter grip

Jan, I am so sorry for your loss. TFlan was a wonderful (and crusty) member of this community. He willingly provided sage advice to us for years. He will be missed! On Sun, Jul 24, 2016, at 01:27 PM, Tom Flanagan tflan1...@gmail.com [SpinetalkersForum] wrote: > > > I am Jan Flanagan, wife of T

ShopTalk: Spin Indexer, DF Clamp

modified unit easily clamped any diameter from a gripped club to a raw shaft down to the 0.335” diameters encountered during zone profiling with no setup changes whatsoever. If anyone is interested contact me directly. Cheers, John Kaufman j...@csfa.com -- Shoptalk ** Sponsored by the new Aldila

Re: ShopTalk: Stamping IronsHERE IS THE KEY

crap piece of steel. >> >> >> >> >> -Original Message- >> From: Steve Longeway >> To: ShopTalk@mail.msen.com >> Sent: Mon, Apr 18, 2016 1:20 pm >> Subject: ShopTalk: Stamping Irons >> >> Has anyone had good luck stampi

Re: ShopTalk: Stamping IronsHERE IS THE KEY

ouble or triple shallow stamp results. Practice on a scrap piece of steel. -Original Message- From: Steve Longeway To: ShopTalk@mail.msen.com Sent: Mon, Apr 18, 2016 1:20 pm Subject: ShopTalk: Stamping Irons Has anyone had good luck stamping forged irons? I have a set of

Re: ShopTalk: Stamping Irons

Use high quality stamps, the $9.99 ones from Harbor Freight won't cut it, they aren't sharp and are not hard enough. David In a message dated 4/18/2016 1:20:13 P.M. Pacific Daylight Time, slong...@gmail.com writes: Has anyone had good luck stamping forged irons? I have a set of Miu

  1   2   3   4   5   6   7   8   9   10   >