I updated my LMS from LMS-7.9.0-1484126560 to 7.9.0 - 1484464959 and now
my log is flooded with the following error messages every 3 seconds:
Code:
[17-01-17 18:57:49.0934]
Slim::Networking::SqueezeNetwork::Players::_players_error (359) Unable to get
players from SN: 50
Could you please find any message that appeared _before_ that flood started?
We've seen issues with LMS sometimes hammering mysb, which would result in
those error 503. but the root cause still is unknown to me.
Michael
> Am 17.01.2017 um 19:15 schrieb oyvindo
> :
>
>
> I updated my LMS fr
mherger wrote:
> Could you please find any message that appeared _before_ that flood
> started? We've seen issues with LMS sometimes hammering mysb, which
> would result in those error 503. but the root cause still is unknown to
> me.
>
Code:
Starting Logitech Media S
[17-01-17 20:30:42.5533]
Slim::Networking::SqueezeNetwork::_error (561) Unable to login to SN:
503 Service Temporarily Unavailable [17-01-17 20:30:42.5540]
Slim::Networking::SqueezeNetwork::_init_error (184) Unable to login
to mysqueezebox.com, sync is disabled: 503 Service Temporarily
Unavailable
mherger wrote:
> I think your best bet is to shut down LMS for 15 minutes, to let the
> hitrate count on mysb's load-balancer settle, then try again.
I'll leave it to rest a day, and then post back. But just for the
record, I haven't installed any new Plugin's for over a year, and this
problem I
I'll leave it to rest a day, and then post back. But just for the
record, I haven't installed any new Plugin's for over a year, and this
problem I've never had before.
You could still do me a favor and tell me what plugins you're using. I'm
trying to get a better understanding of the underlying
I started LMS again today, and the errors immediately began.
Here is the list of active PlugIns:
21922
Here is today's log:
Code:
==
I started LMS again today, and the errors immediately began.
:-(
Here is the list of active PlugIns:
It's a long shot. But please disable whatever you're not 100% certain
you need. You can always re-enable them after the tests. Most plugins
there are installed by default, but you don't nee
Hi Michael,
thanks for your support and your never ending effort to keep the
community alive :-)
I have now deleted this instance of LMS completely, and gone back to a
previous release. So far, the problem is gone. That's why I (in the
first place) assumed that some bug had crept into your latest
Hi Oyvindo (& Michael)
I have just setup LMS in a Docker container on a TS-251+, using the same
Larsks LMS docker image as you (Oyvindo) recommended in your how to
thread, LMS is the same version as you were having problems with:
LMS-7.9.0-1484126560 to 7.9.0 - 1484464959 @ Sun Jan 15,
All st
@Kev
Thanks for your report. Always nice to know one is not alone out here
:-)
Just one "dumb" question; During first time init of LMS, the first thing
you're asked is username and password for SN. On that page, (lower left
corner), there is an option to skip this registration. What did you do?
I
No. Whether you register LMS with MySB.com or not, LMS still sees &
connects to MySB.com. If you use any Apps or even just the Internet
Radio default menus in LMS this is using MySB.com.
toby10's Profile: http://forums.sl
oyvindo wrote:
> I say this because I never use SN anyway. Its features has never really
> struck me as very useful.
>
> Oyvind
Hi,
please look @ the file */etc/default/logitechmediaserver*
you need to change the file to:
Code:
SLIMOPTIONS=" --nomysqueezebox"
-
oyvindo wrote:
> @Kev
> Thanks for your report. Always nice to know one is not alone out here
> :-)
> Just one "dumb" question; During first time init of LMS, the first thing
> you're asked is username and password for SN. On that page, (lower left
> corner), there is an option to skip this regis
Oh, I agree. The Docker solution is superb.
I too have a "retired" TS-119 still running and with LMS installed, but
not running anymore.
My favorite combination though is the Philippe's Castbridge plugin which
I use with different ChromeCast devices I have around the house. The
sound quality from
oyvindo wrote:
> Oh, I agree. The Docker solution is superb.
> I too have a "retired" TS-119 still running and with LMS installed, but
> not running anymore.
> My favorite combination though is the Philippe's Castbridge plugin which
> I use with different ChromeCast devices I have around the hou
KeBul wrote:
> QNAP's Container Station export and import tools do not do this, export
> container and then import back in gives you a fresh install of LMS in
> the new container.
Exactly my experience as well. But are you saying that yo have been
eable to do Export/Import from CLI and successful
oyvindo wrote:
> Exactly my experience as well. But are you saying that yo have been able
> to do Export/Import from CLI and successfully made it through a
> simulated disaster recovery of LMS? If, so - I'd love to learn how.
>
>
> Shairtunes is new to me. I tried to read the forum to understa
KeBul wrote:
> I've downloaded and installed another LMS Docker image and that has Perl
> 5.20.2 in it...
Ooh, exiting - what is the name/Repo-location of the container?
And please keep up the good work on export/import, and keep me (us)
posted Kev. :)
QNAP TS-453Mini 4x3TB RAID5 QTS 4.2.2
LM
mherger wrote:
>
> > [17-01-18 19:41:45.1084]
> Slim::Networking::SqueezeNetwork::Players::_players_error (359) Unable
> to get players from SN: 503 Service Temporarily Unavailable, retrying in
> 900 seconds
>
> This just isn't right :-(. I have to figure out whether we can have some
>
> mor
DJanGo wrote:
> please look @ the file */etc/default/logitechmediaserver*
> you need to change the file to:
> >
Code:
> >
> SLIMOPTIONS=" --nomysqueezebox"
>
> >
I followed your instructions. The file logitechmediaserver now
contains:
Code:
-
Hi Oy,
Containers are fun eh? :roll eyes:
I'll spare you the diversion of my fun and games with them tonight,
other than to say I've still not managed to get an LMS Docker setup I'm
100% happy with.
Anyway - back to your problem... did you re-download the Docker image or
are you re-creating the
[17-01-22 16:26:14.7094] Slim::Control::XMLBrowser::_cliQuery_error (1676)
Error: While retrieving [http://www.mysqueezebox.com/api/myapps/v1/opml]: [A
mysqueezebox.com account is required for this service. Please access Logitech
Media Server Sett
ings -> mysqueezebox.com with a web brows
One more thought... do you have the "mysqueezebox.com service handler"
enabled (check Settings/Plugins)? If so, please disable it and try again.
--
Michael
___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/
KeBul wrote:
> Anyway - back to your problem... did you re-download the Docker image or
> are you re-creating the container using the image in local store?
I used the Larsks image from my local store.
KeBul wrote:
> What about trying a different Docker image? One I've been looking at
> tonight
mherger wrote:
> Do you want to use any mysb.com based services?
No
mherger wrote:
> Did it go bananas right after you entered the username/password? Or did
>
> it take a little longer?
as quick as I managed to Alt-Tab from LMS back to Docker to check -
which, I guess, is pretty instant.
mherger wrote:
> Do you have the "mysqueezebox.com service handler"
> enabled (check Settings/Plugins)? If so, please disable it and try
> again.
I've tried that earlier (it was one of my first thoughts), and it had no
effect then, and now I did it again and it has no effect now either. So,
conc
KeBul wrote:
> What about trying a different Docker image? One I've been looking at
> tonight is "justifiably/logitechmediaserver" if you use the "latest"
> then that is 7.9.0 - 1484464959 @ Sun Jan 15
I tried that version, and it did run ok - and as you said, no other
upgrades needed.
BUT, as so
Yeah, I see those log errors on that Docker image, they are nothing to
do with your problem.
So, without knowing what Michael has seen (and is looking at?), next
thing I would try is a different Squeeze Network login, can you create a
test one to try?
I'd also checkout your login by logging in d
So, without knowing what Michael has seen (and is looking at?), next
thing I would try is a different Squeeze Network login, can you create a
test one to try?
It likely won't help. The blocking is based on the IP address. It might
help to re-start after you had been offline for an hour or more.
Many thanks to both of you for helping me.
Logging on directly to SN is no problem. Please also recall that I've
been ok using LMS in docker for almost a year. This began after the most
recent update of LMS. I'm not thereby saying that I think there is
something wrong with Michael's work. For me,
Logging on directly to SN is no problem. Please also recall that I've
been ok using LMS in docker for almost a year. This began after the most
recent update of LMS. I'm not thereby saying that I think there is
something wrong with Michael's work. For me, this is just the point in
time that I recal
mherger wrote:
> What I don't understand is the fact that you can go back to that
> previous build and be fine, and forth again and it would go crazy.
I'm not so sure I can stand by that statement anymore. I used the
exported container to "go back" and as I discovered, it doesn't restore
everyt
What I don't understand is the fact that you can go back to that
previous build and be fine, and forth again and it would go crazy.
I'm not so sure I can stand by that statement anymore.
Ok, thanks for the clarification.
--
Michael
___
Squeezecente
I just pushed a change which tries to prevent parallel login attempts
even harder than before. It should be available for download in about
half an hour. Could you please update, set logging for
network.squeezenetwork to info, then re-enable mysb.com integration?
--
Michael
__
I'm more than happy to do that. I have one issue though : if it fails
again, I no longer have a return path after I had to give up on the
lobotomized export/import function of Container Station (QNAP). This
means that I have to reinstall LMS all the way from scratch each time it
fails, including r
means that I have to reinstall LMS all the way from scratch each time it
fails, including rescanning the whole library. This takes a lot of time.
Why would you have to do so?
--
Michael
___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.c
Because when LMS runs into the neverending SN-loop, there is no way to
stop it except reinstall... (or have I missed something here?)
QNAP TS-453Mini 4x3TB RAID5 QTS 4.2.2
LMS 7.9.0 running in Docker
Madsonic 6.2 running in Docker
Plex running in Docker
QNAP HS-251 2x2TB RAID0, QTS 4.2.2
Kodi
Because when LMS runs into the neverending SN-loop, there is no way to
stop it except reinstall... (or have I missed something here?)
Oh, many ways:
- service logitechmediaserver stop (or whatever the standard way of your
distribution)
- kill the task by its ID
- telnet yourserver 9090, the
mherger wrote:
> >Oh, many ways:
> Remove the mysb credentials from the server.prefs file and restart.
>
Wow! Everything is easy, once you know how :)
I'll try that one.
Thanks!
QNAP TS-453Mini 4x3TB RAID5 QTS 4.2.2
LMS 7.9.0 running in Docker
Madsonic 6.2 running in Docker
Plex running in Do
mherger wrote:
> I just pushed a change which tries to prevent parallel login attempts
> even harder than before. It should be available for download in about
> half an hour. Could you please update, set logging for
> network.squeezenetwork to info, then re-enable mysb.com integration?
>
I di
To me, this looks promising.
Great!
Anything else You want me to test?
Just use your system, check whether everything online still works
(accessing radio stations, or music services if you have, or podcasts),
and check the server.log whether there are any mysb.com related messages.
--
M
42 matches
Mail list logo
