Hello,
it seems users of FLRIg and WSJT-X / Improved are not too common, what I
have found so far is, when WSJT-X starts, it queries the list of rigs from
the HAMLIB DLL (lib-hamlib-4.dll) to create its rig list. This list of
rigs appears to be a dynamic array as when HAMLIB finds any updated
inf
thanks Wolfgang,
I knew Mike was unwell but had no idea he had passed away, that is quite a
loss for the ham community.
regards,
Peter vk5pj
On Wed, Jul 30, 2025 at 9:13 PM Wolfgang via wsjt-devel <
wsjt-devel@lists.sourceforge.net> wrote:
> Hello Peter,
>
>
>
> a simple search using 'ReplaceSt
where to look.
Regards,
Peter vk5pj
> On Saturday, July 26, 2025 at 09:22:07 PM EDT, Peter Sumner via wsjt-devel
> wrote:
>
>
> Hi,
> for some time now (all of the 2.7 variants and now 2.8) when I open
> WJST-X or swap between configurations, I end up with a rig control
Hello,
when I look at this further and compare running up ver 2.61 and any of
the 2.7x versions I have, the pull down list for choosing the RIG in
version 2.61 shows an option with this text: FLRig FLRig any of the 2.7
or 2.8 releases in that same section of the rig selector show just: FLRig
have placed the link below. That group
> is active and involves the programs created by W1HKJ, including flrig.
>
> Best of luck,
> 73,
> Andy, ka2uqw
>
> https://groups.io/g/linuxham
>
>
>
>
>
> On Saturday, July 26, 2025 at 09:22:07 PM EDT, Peter Sumner via w
Hi,
for some time now (all of the 2.7 variants and now 2.8) when I open
WJST-X or swap between configurations, I end up with a rig control error
and the current rig is shown to be "ADAT www.adat.ch" and not the
previously selected FLRIG setting.
I have learned to live with this for a while and to
Hi Jim,
on his web site he has an article about "Beacon Blaster" at this URL:
http://wb6cxc.com/?p=451
"FST4W-120 on Ten Bands Simultaneously" seems to roughly match up with the
freq you mentioned (depending on what Sideband you were using to read the
CW)
Peter, vk5pj
WS8 #2:
Channel 1, frequenc
Hi Mark,
do not want to muddy the waters with what your trying to achieve but yes,
it's pretty well as you described, I have three rigs with WSJT-X connected,
all Icom in the mix, one has external USB sound card, the others have an
internal sound card and CAT from the rig. For me it is ONLY when I
Hi Mark,
for us windows users, the trigger seems to be when good old microsoft plug
and play comes through and sees that the number of audio interfaces have
changed from last time, like when a monitor with an internal sound card is
powered off then at a later time back on again. Was never sure wh
Hello Dick,
Do not select a com port for ptt, please set that option to be "CAT" for tx
and then should be all okay. Use the test CAT and then test PTT buttons to
the green results.
Peter, vk5pj
On Sat, Jul 27, 2024, 09:04 Richard L Kohlhaas via wsjt-devel <
wsjt-devel@lists.sourceforge.net> wrot
Having seen the recent announcement by Joe on behalf of the DEV team that
RC6 was out there and needed testing, it seems to be the right time to jump
on into the SuperFox experience (not used any of the previous RC's in this
stream).
I chose the X64 package for windows and downloaded, extracted it
Hello David,
have you installed one of the heavy handed security packages like Norton
to the PC ? I have seen people caught up in problems where their
connections are deemed unsafe if the USB chip in the serial port is one of
the old Prolific 'pirated' devices. Just a thought as you might be cha
Hello Development team,
this may seem like a cosmetic request but I have what i feel is a valid
reason (I bet we all say that).
I run a few dedicated WSPR setups here in VK5 on the VHF bands, some times
it can be days between decodes and with just the onscreen data showing only
the ZULU time in t
traffic.
>
> Mike W9MDB
>
>
>
>
>
>
>
>
> On Friday, June 2, 2023 at 06:04:08 AM CDT, Peter Sumner via wsjt-devel <
> wsjt-devel@lists.sourceforge.net> wrote:
>
>
>
>
>
> Hello Alex,
> all other web related activities like web browsing, sys
Hello to you all,
this might not be favoured by all but give the idea a chance, on the WSPR
decode window, the UTC time is shown in the left most column, could this
field be augmented with the Julian day of the year also? for those who do
not know what the Julian day is, simply its the day number
WSPRnet?
>
> alex
> K6LOT
>
> > On Jun 1, 2023, at 10:03 PM, Peter Sumner via wsjt-devel <
> wsjt-devel@lists.sourceforge.net> wrote:
> >
> > Hello,
> > while WSJT-X is a small part of this puzzle, it is a key one so hence I
> am posting this here. I have f
Hello,
while WSJT-X is a small part of this puzzle, it is a key one so hence I am
posting this here. I have for a long time now been using WSJT-X (v1.8 right
through to the current release for ARM v2.61 ) on a Raspberry Pi for a
dedicated WSPR station with two Icom rigs on VHF. Over time both the P
Hello Alan,
to avoid running the installer all together, you can use the '7ZIP'
utility to uncompress the WSJT-X package EXE file straight into a folder on
the PC, yes it works. This is the path I have taken, it allows me to have
many and varied copies of WSJT-X on a PC and no entries in the inst
Hello,
a lot of my time is spent on 50 MHz looking for contacts out of my local
area, the locals seem to want to call me each day, just because they can.
I usually change the TX 6 line to be "CQ DX VK5PJ PF95" to discourage the
locals from calling me but often get caught out when the default form
Hello Alan,
there is one thing you should keep in mind before making your final
decision, there are limits on the number of endpoint devices for both USB2
and USB3 and these total-up on a per controller bassis, you can see each
USB Controller in Windows Device manager. These endpoints include the
Hi Alan,
I am afraid you will have to get used to this happening (No TX audio),
anytime a Windows PC sees a sound device come or go it reshuffles the audio
device ID assignments and you end up in the situation you see now. I have
a HDMI connected monitor that has a sound device inbuilt. Turning
Hi Marty, it may help if you indicate what exact mode your are using ? FT8
Q65 or one of the others? Also at what point does it not progress?
Regards.
Peter, vk5pj
On Sun, Sep 25, 2022, 12:24 Marty Wayne via wsjt-devel <
wsjt-devel@lists.sourceforge.net> wrote:
> When using WSJTx 2.5.4, the auto
Hi Phillip,
It would be nice if the problem could be reduced at the source of the spot
then there is less complexity needed upstream. My thought is the
PSKreporter option in WSJT-X can only be enabled if CAT is defined, this
might filter some of the chaff from the wheat when it comes to spots bef
Hello.
I would like to see the PSKreporter functionality in WSJT-X be restricted
to situations where the CAT control of the rig is active.
Why? oh too often many of us have seen 'false spots' from a busy band
appearing on what is a very quiet band via PSKreporter because an OP
somewhere has cha
Hello Jarmo,
when 'rig' or 'fake-it' is enabled the transmit frequency is moved to
improve the location of your TX tones. As a test, try changing your TX
baseband freq to say 200 Hz and set TX on, note the TX VFO frequency, then
move baseband TX to 2300Hz and repeat, I would bet that you will see
Hi David (AK2L),
this does not have to be the case, if you tick enable the setting "Monitor
returns to last used frequency" in each of your configs on the main
settings page, you may get a pleasant surprise. :-)
regards,
Peter, vk5pj
On Tue, Jan 11, 2022 at 10:21 AM david--- via wsjt-devel <
ws
Hello Dave,
one way to approach this (what I do) is use the '7ZIP' utility to extract
the contents of the package (right click on EXE file / extract to /
folder-name. &Zip recognises the packaged EXE as a type of archive file
and will allow you to extract the contents without running the EXE
inst
k-Start
> Guide to Q65," so I have no idea what may be causing you trouble. If
> you haven't figured it out, you could send me a copy of file WSJT-X.ini
> in your log directory, and I'll look further...
>
> -- 73, Joe, K1JT
>
> On 1/4/2022 5:16 AM, Pete
drive.google.com/drive/folders/1RMdrOT7SVIrTDz4hMdmzZkfXJ2daf0yu?usp=sharing
>
> 73
>
> Charlie G3WDG
>
>
>
> On Tue, 4 Jan 2022 at 10:24, Peter Sumner via wsjt-devel <
> wsjt-devel@lists.sourceforge.net> wrote:
>
>> Hi,
>> at some point the Q65 decode
Hi,
at some point the Q65 decoder engine has stopped showing decodes from
multiple signals in the WSJT-X passband and I am at a loss to explain how
or when this has occurred.
I have downloaded the sample files from the main Pulsar web site and tried
to follow the Q65 quick start guide to no avai
Hi Bill,
typo on my part, the UDP server value I use is: 224.0.0.0
[image: image.png]
I use this for Gridtracker and also the wsjt 'message_aggregator.exe'
program that shows what each of my many instances are doing.
Regards,
Peter, vk5pj
On Thu, Nov 4, 2021 at 1:21 PM Bill Barrett via wsjt-de
Hello Bill,
yes those displays are indeed different as on one you have defined a UDP
broadcast address of 244.0.0.1 which then prompts the WSJT software to
offer you a selection for an interface to apply this to. Ethrnet or
loopback normally, plus the multicast TTL, whereas the other version is th
Hello Joe et all
certainly Lance is making QSO's but seemingly only with the stronger
stations or when he has ground gain. When he is Transmitting on any of the
TX2 TX3 lines the smaller stations (like myself and many others in VK) see
a reasonable trace but very little if anything is decoded from
for the F/H - Contest brigade
Rather than extra buttons / tick boxes on the existing busy screen for a
dedicated group of users, would a small pop-out window like that used for
the Astronomical data display be a better proposal?
I know its a bit of a radical shift of thinking and of course would
On Fri, Aug 27, 2021 at 2:51 AM Bill Somerville via wsjt-devel <
wsjt-devel@lists.sourceforge.net> wrote:
> On 26/08/2021 17:49, Bill Somerville via wsjt-devel wrote:
>
> On 25/08/2021 02:32, Peter Sumner via wsjt-devel wrote:
>
> Hello,
> was curious if anyone has
Hello,
was curious if anyone has a way to use the IQ data available over USB-3
from the rear of an IC-7610 to feed into MAP65?
I have the HDSDR software working with the ICOM supplied driver but as yet
have not managed to get MAP65 to work with this source.
With the new Q65 mode being spread acro
Oh you venturing down the rabbit hole of Dmarc are you.. been there and
have my scars ☹️
Peter, vk5pj
On Thu, 15 Jul 2021, 21:29 Bill Somerville via wsjt-devel, <
wsjt-devel@lists.sourceforge.net> wrote:
> Just testing message handling where DMARC is used.
>
>
>
>
37 matches
Mail list logo
