Since I switched to ssl/tls started to get some error sending mails:
[PeekTime] 1574942083 : Thu, 28 Nov 2019 12:54:43 +0100
<<
ErrCode = -60
ErrString = Bad SMTP response
SMAIL SMTP-Send MX = "mailshield.exent.it." SMTP = "smtp.convergenze.it" From =
"c...@socome.com" To =
Hi,
I was able to configure our xmail 1.27 server to use ssl/tls, now I would like
to check if the email it get through smtp frm sender client is sent to the
final destination using ssl/tls.
so I would like to know if smail uses ssl/tls like smtp and pop3.
regards
Ros
Dear,
I have version 1.26 of XMail.
I have found that the configuration file smtpextauth.tab is not
interpreted correctly. The parameters have a shift. It is necessary to add
a "Dummy" field, like this:
"LOGIN" "*Dummy*" "/etc/dovecot/user_auth.sh" "@@USER""@@PASS"
Hi,checkSmtpAuth.sh is for sure created as I print input parameters and they
seems fine. The created RFILE gave 644 permission being owned by root.root.
Indeed, if exit code is different than 0 I received authentication error, so
the script works. See below the content of checkSmtpAuth.sh
Hi,
smtp.ipmap.tab contains "0.0.0.0" "0.0.0.0" "ALLOW" 1smtprelay.tab
contains only local addresses, therefore not the IP from where I try
(internet). But htis hsould be fine, because this is why I use authentication.
To summarize: I want to connect to the xmail server from
I understand that you can be sure that your checkSmtpAuth.sh is indeed
being called, because you see that the RFILE is created, with the
contents you expect your script to put in there?
In that case my guess is that XMail is having trouble accessing your
RFILE. If the exit code wasn't seen as
Is your ip range allowed in smtprelay.tab?
And about smtp.ipmap.tab ?
Do you have installed a new Xmail Server OR it stops after some time of
use?
Edinilson
Original Message
From: Spon Spon via xmail
To: "xmail@xmailserver.org"
Sent: Ter, Mar 5, 2019, 4:44 AM
Subject: [xmail] SMTP
Hello,
I have a mixed setup with DOVECAT for IMAP access, and XMAIl 1.27 for the rest.
The relay is cosed until authentication is made In order to have a centralized
place for authentication I used in XMAIL external authentication. However
seems it is not working as I receive 550 Relay Denied
Hello Eadthem, Davide and List,
I agree that a "thumbs up" from Davide Libenzi would be a very good starting
point... so: Davide, what do you think?
Undefined behaviour testing is a good idea and fuzzing would be made easier if
we had a suite for another mailserver to base it on, do you have
At the moment ive started toying with the source some.
I am still torn between working on xmail vs switching to a different mail
server.
My thoughts so far.
* My first concern with no active development is, Are there any security
issues hiding.
* I haven't found any in the wild exploits against
Hello Ead,
I have been using xmailserver for quite a long time I have only one server
running but I am familiar with the code and would like to see a stronger
community behind the project. There is a copy of v1.26 and some changes that
someone cloned to Github:
I think no one develops the xmail.
I have not seen updates for a long time.
Thanks & regards,
Dmitriy
From: xmail [mailto:xmail-boun...@xmailserver.org] On Behalf Of ead via xmail
Sent: Saturday, December 23, 2017 1:13 AM
To: xmail@xmailserver.org
Subject: [xmail] Current development status?
I was wondering if Xmail was still being maintained?
Where the official Repo was?
If your looking for volunteers to keep the project alive?
I have been using xmail and phpxmail for 11 years now sense apache2triad.
I have used it on windows, and migrated it to linux and have been using it
on
Bart:
I did as you said.
But it generates 550 Mailbox unavailable errors.
So I went ahead and made a dummy internal account named forw...@rpzdesign.com
Inside the domain for rpzdesign.com, I put a mailproc.tab with a
"redirect"[tab]"externalem...@gmail.com"[newline]
Then I alias to the
Hi,
The easiest solution probably is putting this in aliases.tab:
“rpzdesign.com”[tab]”*”[tab]”rpzrpzrpzj...@gmail.com”
Obviously replacing [tab] with real tabs. And take into account that this is a
file you can’t edit while XMailserver is running (so turn it off first or use
CtrlClnt to edit
How does one create a catch all for a given domain while still allowing
specific users to receive
their messages?
For example:
My domain is rpzdesign.com
I want all messages sent specifically to m...@rpzdesign.com to come to my inbox.
But I want ALL other email address like
Hi,
Are you using mboxes or Maildirs? I am using XMail v1.27 with Debian 7
on ext4 filesystem. May be its filesystem's bottleneck but XMail does
calculate directory size on every RCPT (I looked into the codes) and
causes CPU spike, which isn't a right thing I feel.
-Akash
On 2015-10-22
I use XMail in some customers servers and they have big mailboxes, but
don't have such problem.
What XMail version are you using? What OS and filesystem type?
I use XMail 1.27 on Slackware 13.37 64bits with reiserfs.
How maildir works with a file per message, reiserfs is very nice to handle
large
Hi,
There seems to be a problem in the way XMail checks for quotas on every
RCPT command. I have a large Maildir with around 50 emails and I
noticed that every time XMail receives a email, the CPU spikes to 100%
for few seconds before responding to the RCPT. On debugging I found that
it
My idea to avoid blacklisted on my smtps is to use a dedicated smtp to send
out the bouced emals.
Any idea to do it using xmail?
regards
Ros
___
xmail mailing list
xmail@xmailserver.org
http://xmailserver.org/mailman/listinfo/xmail
On 4 Aug 2015 at 4:26, Watthanachai Kekhua via xmail wrote:
Dear XMail members,
Right now we use about XMail as MTA and we would like to use SMTP
authentication with ldap DB (openldap) .
And in the manual said about add username (email address ) + password in to
file MAILUSERS.TAB.
Dear XMail members,
Right now we use about XMail as MTA and we would like to use SMTP
authentication with ldap DB (openldap) .
And in the manual said about add username (email address ) + password in to
file MAILUSERS.TAB.
So we would like to ignore this kind of case due to security issue show
On Tue, 4 Aug 2015 04:26:33 +
Watthanachai Kekhua via xmail xmail@xmailserver.org wrote:
Right now we use about XMail as MTA and we would like to use SMTP
authentication with ldap DB (openldap) . And in the manual said about
add username (email address ) + password in to file
Oversea Site via xmail wrote on 06/04/2015 04:25 PM:
I have over 1 EMAILS but when I test UIDL, Sometimes, it's not sorting by
ID.
it's a file system
-rw-rw-r-- 1 root root30558 Jun 1 04:46
1433105179992.70d12960.34c.3f8be2.bravo
-rw-rw-r-- 1 root root 989 Jun 1 05:04
I have over 1 EMAILS but when I test UIDL, Sometimes, it's not sorting by ID.
it's a file system
-rw-rw-r-- 1 root root 30558 Jun 1 04:46 1433105179992.70d12960.34c.3f8be2.bravo-rw-rw-r-- 1 root root 989 Jun 1 05:04 1433106257177.5ace6960.34c.3fafbd..bravo-rw-rw-r-- 1 root root 162486 Jun 1
Hi List,
I already made some fixes. See http://www.econtrario.ch/tools/. Maybe
you can use them.
So long
Stefan
___
xmail mailing list
xmail@xmailserver.org
http://xmailserver.org/mailman/listinfo/xmail
Am 24.05.2015 um 18:07 schrieb U.Mutlu via xmail:
if time permits. I'll also setup an svn repository.
Considered using github?
So long
Stefan
___
xmail mailing list
xmail@xmailserver.org
http://xmailserver.org/mailman/listinfo/xmail
Greetings;
Have I missed something here? I've been monitoring this list as a xmail
server user since version 1.2 - simply the best email server we have ever
encountered.
Has something happened to Davide? I know there has been no updates from him
in some long time - I hope that he is well. He
bugs--- via xmail wrote on 06/02/2015 01:31 AM:
Hi List,
I already made some fixes. See http://www.econtrario.ch/tools/. Maybe
you can use them.
Yes, it's already on the todo list. Thx.
--
cu
Uenal
___
xmail mailing list
xmail@xmailserver.org
Now I am using original XMAIL-1.27.tar.gz source without simultaneous POP3
logins, no STUNNEL, use NATIVE XMAIL SSL. The problem still exists, K9-MAIL
will report IllegalFormatConversonException when I receive more then 100-200
emails. So It should be XMAIL SSL problem. Because When I reuse
It might be difficult to determine if the problem is with XMail or with
the client. And even if for example Tencent actually closes the
connection incorrectly, it should be better if XMail would be able to
handle such an improperly closed connection.
But I'm not sure if you'll find somebody in
Bart Mortelmans via xmail wrote on 05/26/2015 03:55 PM:
It might be difficult to determine if the problem is with XMail or with the
client. And even if for example Tencent actually closes the connection
incorrectly, it should be better if XMail would be able to handle such an
improperly closed
Oversea Site via xmail wrote on 05/26/2015 03:09 PM:
Now I am using original XMAIL-1.27.tar.gz source without simultaneous POP3
logins, no STUNNEL, use NATIVE XMAIL SSL. The problem still exists, K9-MAIL
will report IllegalFormatConversonException when I receive more then
100-200 emails. So It
U.Mutlu via xmail wrote on 05/26/2015 04:38 PM:
Bart Mortelmans via xmail wrote on 05/26/2015 03:55 PM:
It might be difficult to determine if the problem is with XMail or with the
client. And even if for example Tencent actually closes the connection
incorrectly, it should be better if XMail
Are you sure this will actually speed up XMail? Have you been able to
compare, specifically for XMail?
As far as I understand how XMail processes e-mails, it actually only
creates a file one time and then moves that file around between
temp-folder, spool folder and local POP3 folders. Moving
Bart Mortelmans via xmail wrote on 05/25/2015 02:24 PM:
Are you sure this will actually speed up XMail? Have you been able to compare,
specifically for XMail?
It will help for files xmail creates in /tmp and doesn't move
to an other drive (for example when the realtime filters get fired
during
I found the bug on XMAIL 1.27 with SSL (POP3S is main), SSMTP servicemaybe has asame bugtoo
1. it will have too many FIN_WAIT_2on POP3Swith two many requests, It is becauseof some non-popular WINDOWS CLIENT e.g. tencent foxmail , outlook will not have this issue.
2. If you're using
Oversea Site via xmail wrote on 05/25/2015 09:23 PM:
I found the bug on XMAIL 1.27 with SSL (POP3S is main), SSMTP service maybe
has a same bug too
1. it will have too many FIN_WAIT_2 on POP3S with two many requests, It is
because of some non-popular WINDOWS CLIENT e.g. tencent foxmail ,
U.Mutlu via xmail wrote on 05/26/2015 07:06 AM:
Oversea Site via xmail wrote on 05/26/2015 05:14 AM:
No Log Error. No Fatal Error log. No Core Dump
It's not RAM or HW problem. It's XMAIL internal issue, because when I switch
to stunnel, all problems solved. And then when I test K9-MAIL with
FEDORA 4 X86_64 GLIBC 2.3.6-3 (I can't upgrade it to the lastest version.
Because I have a chiliasp 3.6.2 32-bit run ASP VBSCRIPT on APACHE 1.3 32-bit
software, it need GLIBC 2.3.x and Kernel 2.6)
KERNEL 3.3 MOD FROM FC15 (It will display KERNEL 2.6.43 Number). Kernel is not
a main problem.
No Log Error. No Fatal Error log. No Core Dump
It's not RAM or HW problem. It's XMAIL internal issue, because when I switch to
stunnel, all problems solved. And then when I test K9-MAIL with XMAIL+STUNNEL,
K9 Client will not have any JAVA somethings Exception Error
Two tests
1. Very Important
Hi Spros All,
this maybe might interest some of you:
HOWTO quick-testing spamassassin (spamd + spamc) at home
spamd is the daemon program (runs in background)
spamc is the client pgm to interact with spamd
1.) install spamassassin pkg (Debian-Linux: apt-get install spamassassin)
2.) enable
Hi Bart All,
Bart Mortelmans via xmail wrote on 05/16/2015 10:27 PM:
I have been using XMail for what must have been almost 15 years. I still
prefer XMail for anything that does not need IMAP.
I have no experience yet with Dovecot, but what does it mean when
they say If you already have
I was introduced to XMail by a colleague of mine.
At first it seemed cryptic and it still is for some stuff I am interested in.
I've been using it since 2003 and never looked back.
---
On Sun, 24/5/15, U.Mutlu via xmail xmail@xmailserver.org wrote:
Tip: Speeding up xmail by pointing envvar XMAIL_TEMP to a ramdisk
(here on Linux using a 64 MB ramdisk mounted to /mnt/ramdisk )
mkdir -p /mnt/ramdisk
in /etc/fstab:
tmpfs /mnt/ramdisk tmpfs nodev,size=64M 0 0
then either reboot or use this cmd:
mount /mnt/ramdisk
in xmail start script:
I think that a github repo is better and easier to fork just in case someone
else will contribute.
Stefano
Il giorno 24/mag/2015, alle ore 18:09, U.Mutlu via xmail
xmail@xmailserver.org ha scritto:
Hi Bart All,
Bart Mortelmans via xmail wrote on 05/16/2015 10:27 PM:
I have been
Hi, i'm using xmail but i need to create a cluster with 2 active server. In
particular i need to share the mail folder. Is there some solution for this
task? I thought to nfs is this a good idea?
I can use drbd with on top iscsi, but i don't know if iscsi supports
multiple mount from multiple
On 16 May 2015 at 16:00, U.Mutlu via xmail wrote:
Hi folks,
I'm using xmail for a long time now (maybe 7 yrs), and I'm still
very satisfied with it. OTOH I must admit I'm using it only for
a small number of users, and I've used (before xmail)
only one other mail-system (it was qmail iirc).
Hi folks,
I'm using xmail for a long time now (maybe 7 yrs), and I'm still
very satisfied with it. OTOH I must admit I'm using it only for
a small number of users, and I've used (before xmail)
only one other mail-system (it was qmail iirc).
I'm using a self-compiled version of xmail (the
Hi,
I have been using XMail for what must have been almost 15 years. I still prefer
XMail for anything that does not need IMAP.
I made some small changes to the code. If anybody would be willing to pick up
XMail and start development again, I hope that these changes can also get into
the new
Hi, anybody left here? :-)
Can anybody confirm this? :
It seems xmail does not make a log entry for a non-deliverable mail.
Though it sends an error mail to the sender (Subject Error sending message
...).
This is not optimal, since the mail admin should have the possibility
to inform himself
I'm still here :)
You can set ErrorsAdmin in server.tab to an email address that will
receive delivery failure notification
On 04/30/2015 04:56 AM, U.Mutlu via xmail wrote:
Hi, anybody left here? :-)
Can anybody confirm this? :
It seems xmail does not make a log entry for a
Hi,
still here, waiting for new XMail version, after such long time it
must be any day now. ;)
What you want are ErrorsAdmin and TempErrorsAdmin variables in server.tab:
[ErrorsAdmin]
The email address that receives notification messages for every
message that has had delivery errors.
Hi, I've just installed xmail 1.27-1.1+b1 on a debian 7.5.0 station
and I can't get emails in my mailbox.
There isn't troubles in sending emails to the world but not receiving
from the world.
The smtp log say that's everything Ok.
Recently I was running on a debian 6 station xmail 1.27-1.1
Hi,
i'm trying to achieve a local smtp server without authentication that
can relay to external smtp (that require auth with TLS) for sending
email from some monitoring/alerting software that i had on my local
lan.
this is my simple configuration:
server.tab
RootDomain xmailserver.test
Hello.
I've the problem that some servers out of any reason cant/does not
send there mails to my xmail-accounts. these mails are rejected either
by my xmail-server or the opposite uploading mailserver. I can's see
anything in logfiles what says about why that problem is as it is.
my domain is
Hello.
I've the problem that some servers out of any reason cant/does not
send there mails to my xmail-accounts. these mails are rejected either
by my xmail-server or the opposite uploading mailserver. I can's see
anything in logfiles what says about why that problem is as it is.
my domain is
Hello all,
I tried to compile XMail on a 64-bit CentOS v6.5 server but it failed.
Is there a 64-bit version of XMail I don't know of ?
Is there a switch ?
I am stuck . . . .
tia,
s.
___
xmail mailing list
xmail@xmailserver.org
Hello all,
Please strike my last and my ignorance.
Should've done my homework first.
Apologies to all.
gcc-g++ was missing on the CentOS system I
was trying to compile .
ta,
s.
___
xmail mailing list
xmail@xmailserver.org
Hello
I use XMail on 64-bit Ubuntu server.
I haven't any problems with compilation.
-Original Message-
From: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] On
Behalf Of Spyros Tsiolis
Sent: Thursday, March 20, 2014 2:40 PM
To: XMail List
Subject: [xmail] xmail on
is there any error messages when compiled xmail? could
you share/post here? maybe the *-devel packages is
missing?
On Thu, 20 Mar 2014 08:40:11 + (GMT)
Spyros Tsiolis sts...@yahoo.co.uk wrote:
I tried to compile XMail on a 64-bit CentOS v6.5 server but it failed.
Is there a 64-bit version
Hi there,
Yes, there was an error message.
Something like g++ is missing, cannot find ...
gcc-g++ was not installed :-)
s.
On Thu, 20/3/14, Wijatmoko U. Prayitno k...@crypto.my.id wrote:
Subject: Re: [xmail] xmail on 64-bit systems ?
To:
Hello all,
Does XMail support TLS ?
Any pointers ?
Best,
s..___
xmail mailing list
xmail@xmailserver.org
http://xmailserver.org/mailman/listinfo/xmail
Spyros Tsiolis schreef op 5/01/14 20:30:
Does XMail support TLS ?
yes
___
xmail mailing list
xmail@xmailserver.org
http://xmailserver.org/mailman/listinfo/xmail
Hello all,
first the versions :
uname -a : Linux jekyll 2.6.18-194.17.1.el5 #1 SMP Wed Sep 29 12:51:33 EDT 2010
i686 i686 i386 GNU/Linux
root@prompt : more /etc/redhat-release
CentOS release 5.5 (Final)
XMail v1.27
Hardware is i386
For one and only one account it comes up with the
Try to delete the account and create it again (via CTRL protocol).
Maybe wrong permissions in the folder, etc.
Edinilson
--
ATINET
Tel Voz: (0xx11) 4412-0876
http://www.atinet.com.br
- Original Message -
From: Spyros Tsiolis
To: XMail
hi,
Yep. You were right.
I cannot understand . This account has been around for ages.
Thank you anyway.
s.
I merely function as a channel that filters
music through the chaos of noise
- Vangelis
From: Edinilson - ATINET edinil...@atinet.com.br
To:
Hi, thanks for the patch !
Could you publish or send to the list the diffs against 1.27 original for your
patch, so everybody here could :
1 - check your source code (potential bugs, security holes, ...), its allways
good to have some 'checkers' validating it
2 - compile on they favorite
Oups, nevermind, I missed the diff was in your first post !
Sorry
In case, have you made any news changes in this code after initial post ?
(enhancements,...)
Thanks again
Francis
===
Message d'origine - 09/10/2013 09:55:27
Hi,
For Custmapslist in server.tab it possible to set timeout?
Ex. If cannot connect to bl.spamcop.net in 30 second, it automatic timeout
and bypass mail send as normal.
Now I found problem if cannot connect to RBL site XMail it no respond
(SMTP).
Regards,
Rittikorn L.
A long time ago Davide answer this question. See below:
On Tue, 30 Apr 2002, Camacho, Christian wrote:
I have some questions about CustMapsList:
What happen if the maps-root can't be contacted; the map-root server is busy
or it's name is type mismatched?
the mail go through
Is it possible
Thank you, but I wonder why my case mail not go through or it take a time?
I wait more than 5 minutes but no luck.
Sent from smart phone server. (SPS)
From: Edinilson - ATINET
Sent: 1/10/2013 21:32
To: XMail Users Mailing List
Subject: Re: [xmail] Custmapslist
Try to disable SMTP-RDNSCheck and use a SmartDNSHost pointing to some server
inside your lan.
Regards
Edinilson
--
ATINET
Tel Voz: (0xx11) 4412-0876
http://www.atinet.com.br
- Original Message -
From: Rittikorn L.
To: Edinilson - ATINET ;
Hi
I coded an SSL/TLS enhancement for xMail. You can define the cipher
list (and disable unwanted, insecure ciphers). Now Diffie-Hellman
ciphers are possible. Furthermore received-lines have information
about encrypted connection.
More information and patch @ http://www.ionum.ch/tools/
so
Great job.
Anyone is implementing DKIM?
-Messaggio originale-
Da: xmail-boun...@xmailserver.org [mailto:xmail-boun...@xmailserver.org] Per
conto di Stefan
Inviato: venerdì 6 settembre 2013 17:21
A: xmail@xmailserver.org
Oggetto: [xmail] SSL/TLS enhancement for xMail
Hi
I coded an
Hi,
I have the problem that my installation of XMail 1.27 cannot resolve DNS
addresses. To be specific, when stracing the SMAIL process, it creates a
socket and connects() to 127.0.0.1 at port 53 (I use SmartDNSHost of
localhost). However, the SMAIL process does not get a return from the
DNS
To deliver messages to several accounts you should use lists. Alias is just one
to one, as it is, an alias for an account.
On Tue Jun 18 09:33:15 2013 U.Mutlu um4...@mutluit.com wrote:
I think I found a bug relating account aliases:
Adding an alias
Hi Edinilson, thanks for the info.
I must have mixed up the SMTP filters with the other filters.
The xmail documentation is unfortunately a little bit wild,
it better should be grouped into real sections, and numbered with section
and paragraph numbers for easier reading and referencing.
BTW,
Hi,
is it possible with xmail to have a mailbox where the content
cannot be deleted by the user via his mail reader?
This is to allow multiple users to share the same mailbox, a kind of
collaboration.
When one user fetches the (new) mails with his mail client then normally
the message gets
Yes, it seems that was it!
After restarting xmail it worked as advertised :-)
Edinilson - ATINET wrote, On 05/24/2013 09:30 PM:
How are you dealing with XMail´s files?
Be careful because some files are indexed and you CAN´T edit them directly.
Edinilson
From readme.txt:
MLUSERS.TAB
If the user is a mailing list this file must exist inside the user account
subdirectory and contain a list of users subscribed to this
list. The file format is:
user[TAB]perms[NEWLINE]
where:
user
subscriber email address.
perms
subscriber permissions:
R
Which kind of filter are you asking:
MESSAGE FILTERS
or
SMTP MESSAGE FILTERS
?
Remember that yout must ADD some flags values.
There are some examples in readme.txt
Here I have a filter that add 4 + 16 and returns this value. It´s working
fine for years.
Regards
Edinilson
There is only one flag value, 16, it's optional and means to stop processing
any further filters in the chain, ie. an early-break signal.
I mainly mean the SMPT message filters.
Are the return values 4, 5, 6 (plus +16 to them) not used with this?
As said, in my installation (original v1.27) only
I added a test user with just R permission,
but that user still could post to the mailing list.
I just wonder what I'm doing wrong... :-)
Edinilson - ATINET wrote, On 05/24/2013 02:26 PM:
From readme.txt:
MLUSERS.TAB
If the user is a mailing list this file must exist inside the user account
I think that you are missing some points about filters.
Inside mailroot you will find 2 files:
filters.in.tab
filters.out.tab
for example, in filters.in.tab put something like:
* *@YOUR-DOMAIN 0.0.0.0/0 0.0.0.0/0 YOUR-DOMAIN.tab
After that, you must create a file inside FILTERS dir called:
How are you dealing with XMail´s files?
Be careful because some files are indexed and you CAN´T edit them directly.
Edinilson
--
ATINET
Tel Voz: (0xx11) 4412-0876
http://www.atinet.com.br
- Original Message -
From: U.Mutlu um4...@mutluit.com
Hi,
does anybody know what the RA user permission means?
This is when adding a 'mailing list user' with CtrlClnt mluseradd.
___
xmail mailing list
xmail@xmailserver.org
http://xmailserver.org/mailman/listinfo/xmail
The xmail documentation says:
If this filters returns '4, 5 or 6' the message is rejected and is
stopped in its travel. If the filter modifies the message it must return '7'.
But, this info seems to be totally wrong, as only 0 and 3 is working
(plus adding 16 to it for stopping processing
- Original Message -
From: U.Mutlu um4...@mutluit.com
To: XMail Users Mailing List xmail@xmailserver.org
Cc:
Sent: Wednesday, 22 May 2013, 0:52
Subject: Re: [xmail] SPF update?
Too bad xmail doesn't have natively spf-support yet, many other mailers do:
Hello all,
I have a situation with an installation where someone has managed
to get hold of an e-mail address (the boss' actually) and is sending
spam to the outside world.
To an extend, I've managed to isolate the problem and it seems
it's the mail server itself.
I still don't know if it's
Hello,
It is also possible that someone is sending spam messages directly, not
via your mailserver. If you have a spam message, you can usually find
out if this is the case by viewing the e-mail headers (often visible in
the raw email source). Is your mail server listed in the headers (in a
Hi Spyros
I experienced a similar situation some months ago: one of my server
email owner was sending tons of spam
After figthing with many log files, I have discovered that the hacker
had been able to hack the mailbox pwd, and he was sending the email
using smtp autetication method.
You can
From: Stefano Pascucci s.pascu...@cdq.it
To: XMail Users Mailing List xmail@xmailserver.org
Sent: Tuesday, 21 May 2013, 19:05
Subject: Re: [xmail] message logging
Hi Spyros
I experienced a similar situation some months ago: one of my
server
Below a message from Davide about SPF:
--
On Thu, 29 Jan 2009, Ralf wrote:
I'm trying to switch from qmail to xmail.
There I had SPF activated and would like to use SPF also in xmail.
I saw that there is a perl script for SPF
I think that the best way to avoid this kind of problem is making an OUTPUT
filter that insert email headers (from, to, date/time) into a sql table to
EACH message your XMail sends.
So you can schedule another script in your OS (every 5 minutes, for example)
that sum these table rows and take
Too bad xmail doesn't have natively spf-support yet, many other mailers do:
http://www.openspf.org/Implementations
Here's a description of my solution of SPF with xmail:
I tried to use the xm-spf.pl, but perl reported some errors about
a missing component or so. Then I found a package named
Hi Davide All,
just a question: does the SPF script (xm-spf.pl) cover the
final SPFv1 specification (RFC 4408) as depicted here:
http://www.openspf.org/Specifications
The script is from the year 2004, but the above RFC was ratified in 2006.
Can something go wrong when the script is used
To which firewall have you migrated to? Pfsense?
Did you change MTU size in migration?
Regards
Edinilson
--
ATINET
Tel Voz: (0xx11) 4412-0876
http://www.atinet.com.br
- Original Message -
From: Spyros Tsiolis
To: XMail List
Sent:
Hello all,
Long time no write.
I have an issue with two Xmail installations.
I suspect that it's not XMail per se, but I need your feedback.
Two companies with main and branch offices.
All main offices are connected to branch offices via ipsec and static VPNs.
I lately upgraded the firewall
Hi Edinilson
Yes, It no any script on server,
for you monitoring it have any kind of tool to monitoring process too?
I mean it possible to know what process or service take action?
Best Regards,
Rittikorn L.
-Original message-
From:Edinilson - ATINET edinil...@atinet.com.br
1 - 100 of 14221 matches
Mail list logo
