Yes, that 50 second trip time with the new accelerator still appears too long.  
Is the air maintenace device working properly?  Perhaps left in fill mode 
rather than switched to operating mode?  Or the orifice is missing from the 
operating side of the AMD?

Dave 

David A. de Vries, P.E., CSP 
Firetech Engineering Incorporated 


--- On Sat, 5/2/09, Ed Vining <[email protected]> wrote:


From: Ed Vining <[email protected]>
Subject: Re: Slow responding dry pipe valves
To: [email protected]
Date: Saturday, May 2, 2009, 10:08 PM


You point out that the valve now trips in 50 seconds, where before it was
80. This indicates the accelerator is working, but not fast enough.
Possibly because of the accelerator itself.  A restriction in the IT
discharge line could cause it too.  If the pipe to the ITV is very long,
trip time could be reduced by upping the size.  Even if the accelerator
tripped much faster, it seems the delivery time would be too long

An exhauster would certainly help, particularly if it is way out on the
system.  One has to be careful, though, when both an exhauster and
accelerator are used.  The exhauster must trip first.

A manufacturer could tell you if the 19 psi is outside the working range of
his exhauster.  Spec sheets usually list only the maximum rated pressure.
The speed of operation of an exhauster can be adjusted, but it must be done
carefully.  If it is too sensitive, the system could trip on normal
variations in pressure.

Ed

-- 
Ed Vining
4819 John Muir Rd
Martinez CA 94553
925-228-8792
_______________________________________________
Sprinklerforum mailing list
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)
_______________________________________________
Sprinklerforum mailing list
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)

Reply via email to