If you're taking WON'T make it with exhauster then no bet. If you're
taking WILL make it with exhauster then I'll give you whatever odds
you like. "Ceptin' I never bet money. There is not a good whisky bar
in the area but you can get good whiskey at Paddy Coynes in Tacoma. We
can settle up there.

On Mon, May 4, 2009 at 8:38 AM, Roland Huggins
<[email protected]> wrote:
> One minor problem -where you going to find a new exhauster?  The
> reference to exhausters in NFPA 13 has been removed for the 2010
> edition since they are no longer manufactured.
>
> Even with one, any bets that a 2-1/2 minute water delivery after valve
> trip will still not make the combined 60 sec maximum?
>
> Roland
>
> On May 2, 2009, at 8:08 PM, Ed Vining wrote:
>
>> You point out that the valve now trips in 50 seconds, where before
>> it was
>> 80. This indicates the accelerator is working, but not fast enough.
>> Possibly because of the accelerator itself.  A restriction in the IT
>> discharge line could cause it too.  If the pipe to the ITV is very
>> long,
>> trip time could be reduced by upping the size.  Even if the
>> accelerator
>> tripped much faster, it seems the delivery time would be too long
>>
>> An exhauster would certainly help, particularly if it is way out on
>> the
>> system.  One has to be careful, though, when both an exhauster and
>> accelerator are used.  The exhauster must trip first.
>>
>> A manufacturer could tell you if the 19 psi is outside the working
>> range of
>> his exhauster.  Spec sheets usually list only the maximum rated
>> pressure.
>> The speed of operation of an exhauster can be adjusted, but it must
>> be done
>> carefully.  If it is too sensitive, the system could trip on normal
>> variations in pressure.
>>
>> Ed
>>
>> --
>> Ed Vining
>> 4819 John Muir Rd
>> Martinez CA 94553
>> 925-228-8792
>> _______________________________________________
>> Sprinklerforum mailing list
>> http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
>> For Technical Assistance, send an email to: [email protected]
>>
>> To Unsubscribe, send an email to:[email protected]
>> (Put the word unsubscribe in the subject field)
>>
>
> _______________________________________________
> Sprinklerforum mailing list
> http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
> For Technical Assistance, send an email to: [email protected]
>
> To Unsubscribe, send an email to:[email protected]
> (Put the word unsubscribe in the subject field)
>



-- 
Ron Greenman
at home....
_______________________________________________
Sprinklerforum mailing list
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)

Reply via email to