You're getting close! :-)
On Thu, Sep 5, 2013 at 5:56 AM, Mills, Derek <[email protected] > wrote: > Does this have anything to do with VLAN211 being in MST instance 0 and > VLAN52 in MST instance 1? > > -----Original Message----- > From: [email protected] [mailto: > [email protected]] On Behalf Of Marko Milivojevic > Sent: Tuesday, September 03, 2013 3:15 PM > To: [email protected] > Cc: OSL Routing and Switching > Subject: Re: [OSL | CCIE_RS] WB3-Lab9-L2VPN Task > > Again, this is not related to AToM :-) > > > On Tue, Sep 3, 2013 at 1:14 PM, <[email protected]> wrote: > > > ** > > The only thing I can think of problems connected to the STP with > > mismatching vlans in VLAN CONNECT MODE. > > If I am not mistake there are 2 kind of VC type: port-mode or > > VLAN-mode for Ethernet L2VPNs. > > A PortMode will replicate all Ethernet frames received, including all > > tagged frames. > > Perhaps in port mode we have not the problem about mismatching vlan > > > > In VLAN-based mode we will have xconnect statement will be under a > > sub-interface with own encapsulation and VLAN number specified. > > This mode will just forward the own VLAN frames through pseudowire. > > > > However I think to replicate this problem. > > > > > > On Tue, Sep 3, 2013, at 10:04 PM, Marko Milivojevic wrote: > > > > Sure, but that will open the network for the loops. > > > > Try to focus on what the problem is, not how to get rid of the symptom > > :-) > > > > -- > > Marko Milivojevic - CCIE #18427 (SP R&S) Senior CCIE Instructor / > > Managing Partner - IPexpert > > > > > > On Tue, Sep 3, 2013 at 1:02 PM, <[email protected]> wrote: > > > > > > ** > > There are other solution for example vlan filter, also L2 protocol > > tunnel which erase local bpdu processing. > > > > > > > > > > On Tue, Sep 3, 2013, at 09:57 PM, [email protected] wrote: > > > > I am thinking we filtering bpdu to stop bpdu from blocking > > inconsistent vlan,bpdu filtering is acceptable for me. > > > > What did you think? > > > > > > > > On Tue, Sep 3, 2013, at 08:17 PM, Marko Milivojevic wrote: > > > > You're getting close. > > > > > > Respond to the list, please, as it may be interesting for the others > > to see, as well. > > > > -- > > Marko Milivojevic - CCIE #18427 (SP R&S) Senior CCIE Instructor / > > Managing Partner - IPexpert > > > > > > On Tue, Sep 3, 2013 at 11:16 AM, <[email protected]> wrote: > > > > > > ** > > In fact I did not think it is related to l2vpn, althhough I do not > > know different vlan to VC however I am thinking is related config to > > port or mode spanning tree, I will check conifguration to end point > > port: if 802.1q to two side and native vlans, or model of stp EEE > > 802.1D and pvst+ > > > > > > On Tue, Sep 3, 2013, at 07:32 PM, Marko Milivojevic wrote: > > > > That is all very correct, but that's not the cause of the error. You > > *can* have different VLAN IDs on two ends of the VC, but then you need > > to make sure something else is done. Something that causes this problem. > > > > Btw. it's not related to L2VPNs :-) > > > > -- > > Marko Milivojevic - CCIE #18427 (SP R&S) Senior CCIE Instructor / > > Managing Partner - IPexpert > > > > > > On Tue, Sep 3, 2013 at 9:45 AM, <[email protected]> wrote: > > > > Point-to-Point L2 VPNs L2 connectivity to the attached, that make > > circuits of two separate sites connected across a packet network > > Furthemore It provide connectivity transparent without need L2 > > connection acrosss SP core > > > > In the speficic: > > > > The VC identifiers at each end must match, so that the connection is > > uniquely addressed and MTU settings for the interfaces would have the > > same > > > > In mpls the topmost label is the transport label for the other end's > > 1321P address and the second label identifies the remote AC > > > > Your error usually mean you receveid bpdu tagged with vlan id that > > does't match vlan id where bpdu was receveid In the meantime make > > sure native vlan is consistent on both ends of a 802.1Q trunk and > > your vtp switches setup like VTP mode and domain names > > > > I hope it help you. > > > > > > > > > > > > On Tue, Sep 3, 2013, at 06:00 PM, Marko Milivojevic wrote: > > > Without straight-out giving you an answer (tell me if you want > > that), > let's > try to understand the problem first… > > What do > > you think is causing this inconsistency? > > > > > > -- > > > Marko Milivojevic - CCIE #18427 (SP R&S) > Senior CCIE Instructor > > / Managing Partner - IPexpert > > > On Tue, Sep 3, 2013 at 8:36 AM, > > Saleh Batouq <[email protected]> > wrote: > > > > > > > WB3-Lab9 > > > > -------- > > > > Task: L2VPN > > > > ------ > > > > > > > > > > > > I am running this on GNS, I have the AToM properly configured and > > > > functional. > > > > > > > > BUT I get Inconsistency messege on Cat1 & Cat3 > > > > Any > > suggestion on over-riding this inconsistency? > > > > > > > > > > > > > > > > > > > > The following are the outputs of show commands: > > > > > > > > > > > > > > > > > > > > On R2 > > > > ----- > > > > > > > > R2#sh mpls l2transport vc > > > > > > > > Local intf Local circuit Dest address VC ID > > Status > > > > ------------- -------------------------- --------------- > > ---------- > > ---------- > > > > Fa0/0.211 Eth VLAN 211 70.18.115.5 25 > > UP > > > > > > > > > > > > On R5 > > > > ------ > > > > > > > > R5#sh mpls l2transport vc > > > > > > > > Local intf Local circuit Dest address VC ID > > Status > > > > ------------- -------------------------- --------------- > > ---------- > > ---------- > > > > Fa0/1.52 Eth VLAN 52 70.18.115.2 25 > > UP > > > > > > > > > > > > > > > > > > > > > > > > BUT I get Inconsistency messege on Cat1 & Cat3 > > > > -------------------------------------------------- > > > > > > > > > > > > On Cat1 > > > > ------- > > > > > > > > Cat1(config)# PVST+:Inconsistency timer expired. inconsistency 2 > > > > cleared for FastEthernet1/2 > > > > > > > > *Mar 1 01:44:56.119: %SPANTREE-2-RECV_PVID_ERR: Received BPDU > > with > > inconsistent peer vlan id 52 on FastEthernet1/2 VLAN211. > > > > *Mar 1 01:44:56.119: %SPANTREE-2-BLOCK_PVID_LOCAL: Blocking > > > > FastEthernet1/2 on VLAN211. Inconsistent local vlan. > > > > > > > > > > > > > > > > Cat1#sh spanning-tree inconsistentports > > > > > > Name Interface Inconsistency > > > > -------------------- -------------------- ------------------ > > > > VLAN211 FastEthernet1/2 Port VLAN ID Mismatch > > > > > > > > Number of inconsistent ports (segments) in the system : 1 > > > > > > On Cat3 > > ------- > > > > [OK] > > Cat3# > > *Mar 1 > > 01:44:49.487: %SPANTREE-2-RECV_PVID_ERR: Received BPDU with > > > > inconsistent peer vlan id 211 on FastEthernet1/5 VLAN52. > > > > *Mar 1 01:44:49.487: %SPANTREE-2-BLOCK_PVID_LOCAL: Blocking > > > > FastEthernet1/5 on VLAN52. Inconsistent local vlan. > > > > > > > > > > > > Cat3#sh spanning-tree inconsistentports > > > > > > Name Interface Inconsistency > > > > -------------------- -------------------- ------------------ > > > > VLAN52 FastEthernet1/5 Port VLAN ID Mismatch > > > > > > > > Number of inconsistent ports (segments) in the system : 1 > > > > > > Best Regards, > > > > Saleh Hassan Batouq > > > > [email protected] > > > > _______________________________________________ > > > > For more information regarding industry leading CCIE Lab > > training, please > > visit www.ipexpert.com > > > > Are you a CCNP > > or CCIE and looking for a job? Check out > > > > www.PlatinumPlacement.com > > > > > > http://onlinestudylist.com/mailman/listinfo/ccie_rs > > > > > > > _______________________________________________ > > > For more information regarding industry leading CCIE Lab training, > > please > visit www.ipexpert.com > > Are you a CCNP or CCIE and > > looking for a job? Check out > www.PlatinumPlacement.com > > > > http://onlinestudylist.com/mailman/listinfo/ccie_rs > > > > > > -- > > This message is intended for the individual(s) to whom it is > > addressed and may contain information that is privileged or > confidential. > > If you are not the addressee you must not read,use or disclose the > > contents of this email. > > Whilst all reasonable care has been taken to avoid the transmission > > of viruses, the recipient should carry out virus and other checks, > > as they consider appropriate. > > Myself accepts no responsibility in this regard. > > _______________________________________________ > > For more information regarding industry leading CCIE Lab training, > > please visit www.ipexpert.com > > > > Are you a CCNP or CCIE and looking for a job? Check out > > www.PlatinumPlacement.com > > > > http://onlinestudylist.com/mailman/listinfo/ccie_rs > > > > > > > > > > -- > > This message is intended for the individual(s) to whom it is addressed > > and may contain information that is privileged or confidential. > > If you are not the addressee you must not read,use or disclose the > > contents of this email. > > Whilst all reasonable care has been taken to avoid the transmission of > > viruses, the recipient should carry out virus and other checks, as > > they consider appropriate. > > Myself accepts no responsibility in this regard. > > > > > > > > > > > > > > -- > > This message is intended for the individual(s) to whom it is addressed > > and may contain information that is privileged or confidential. > > If you are not the addressee you must not read,use or disclose the > > contents of this email. > > Whilst all reasonable care has been taken to avoid the transmission of > > viruses, the recipient should carry out virus and other checks, as > > they consider appropriate. > > Myself accepts no responsibility in this regard. > > > > > > > > > > -- > > This message is intended for the individual(s) to whom it is addressed > > and may contain information that is privileged or confidential. > > If you are not the addressee you must not read,use or disclose the > > contents of this email. > > Whilst all reasonable care has been taken to avoid the transmission of > > viruses, the recipient should carry out virus and other checks, as > > they consider appropriate. > > Myself accepts no responsibility in this regard. > > > > > > > > > > > > > > -- > > This message is intended for the individual(s) to whom it is addressed > > and may contain information that is privileged or confidential. > > If you are not the addressee you must not read,use or disclose the > > contents of this email. > > Whilst all reasonable care has been taken to avoid the transmission of > > viruses, the recipient should carry out virus and other checks, as > > they consider appropriate. > > Myself accepts no responsibility in this regard. > > > > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs > > > ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- > Anheuser-Busch InBev Email Disclaimer www.ab-inbev.com > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
