I'm not sure what "Right hand side" means, but IDE devices should be
enabled. I believe you can check this in Device Manager under
IDE/ATA/ATAPI Controllers.
It should do no harm to change these settings, as you can then reboot
and change them back.
Lisa Schnepf wrote:
In my Gateway user guide, under troubleshooting DVD Drives it says:
Enter the BIOS Setup Utility and make sure that IDE controllers are
enabled.
I went into the BIOS and under ATA/IDE configuration it I says
[enhanced]
When you click on [enhanced] the only other options are [legacy] and
[disabled] nothing says [enabled].
On the right hand side it says " Disabled. All IDE resources disabled".
Is it supposed to be enabled or is this correct??
============= PCWorks Mailing List =================
Don't see your post? Check our posting guidelines &
make sure you've followed proper posting procedures,
http://pcworkers.com/rules.htm
Contact list owner <[EMAIL PROTECTED]>
Unsubscribing and other changes: http://pcworkers.com
=====================================================
