At 11:58 AM +0100 10/10/03, [EMAIL PROTECTED] wrote:
1) I can't get /usr/local/etc/rc.d/*sh to work.
I don't have any ideas to offer on this.
2) Building kernels/worlds is MUCH slower than under 4.X. A kernel
used to take around an hour; it's taking about 4 under 5.1
(Cyrix 166mhz/64Mb RAM).
At 2:17 PM -0400 10/15/03, Tom Parquette wrote:
I'm trying to configure printing on the "local" machine
(Stargate) to point to lp on P3R-272.
This is what I currently have coded in Stargate's printcap
file:
lp|HP2000 on P3R-272:\
:sh:\
:sd=/var/spool/lpd/lp:lf=/var/log/lpd-errs:\
At 11:00 AM -0800 10/28/03, Jason Williams wrote:
Thanks Matthew for your explanation. You answered a lot
of my questions. Makes sense now really.
Just out of curiosity, why would someone want to use:
RELENG_4_8_0_RELEASE?
Is there some type of benefit?
One would think that the best option for p
At 7:42 AM -0600 10/29/03, Charles Howse wrote:
Note below, that the connection was opened on the 28th, but
did not close, however the connection to "Seeds" closed
about 4 mins after I opened it.
Snippet from /var/log/moe.log
[2003/10/28 12:11:13, 1] smbd/service.c:make_connection_snum(698)
moe (
At 1:22 PM -0600 10/29/03, Charles Howse wrote:
Garance wrote:
>
I'm not much of an expert on the low-level details, but I can
say that what you're seeing is also what I've seen, and that
I believe samba is supposed to work that way.
I just checked again, and the connection was closed at 12:13
At 8:45 PM -0700 10/28/03, <[EMAIL PROTECTED]> wrote:
I have a printer configured in the BSD, is working fine, now
I need to enable that other systems print in this printer,
to do this I add 2 lines to the file /etc/hosts.lpd
10.192.2.134
as_nte.intranet.telmex.com.
but the remote system can't prin
At 8:55 PM -0700 10/31/03, <[EMAIL PROTECTED]> wrote:
Hi Garance.
Thanks for your answer, ...
I think that the solution to my dilemma, is modify
the source code of LPD.
But before this I like to try the "netgroup" option,
where can I begin to read?
Well, you can check:
man hosts.lpd
which
At 1:47 PM +0100 11/4/03, Nic Bergen wrote:
Hi,
I'm trying to install freebsd on an old i486 (75mhz) with
40mb ram I have two harddrives 260 and 349mb.
Which version of FreeBSD are you trying to install?
--
Garance Alistair Drosehn= [EMAIL PROTECTED]
Senior Systems Programmer
At 1:50 PM -0400 10/6/02, Gerard Samuel wrote:
>I setup and installed a printer yesterday, and installed LPRng and
>apsfilter from ports (fresh cvsup), and had apsfilter print out that
>funky test page. In continuing the setup the box, I am trying to
>print a file, and getting these results ->
>--
At 1:12 PM -0400 10/18/02, TheGlenMann wrote:
Docs on the subtleties on LPD seem to be in short supply. It looks
like the PAGEPROTECT thing breaks the whole system, then the cannot
rename seems to be Windows trying again to send the file...
How can I determine what is wrong? I suspect that permis
At 12:03 PM -0500 10/28/02, Vivek Khera wrote:
> "DN" == Dan Nelson <[EMAIL PROTECTED]> writes:
but I have not enabled CUPS in samba at all. Does anyone know what I
need to do to migrate successfully from samba 2.2.5 to 2.2.6? Here's
my config:
DN> When you did the install, you proba
At 6:56 AM -0800 11/4/02, Roberto Armenteros wrote:
The download process is very fast, but not the upload
process. When I upload to my other windows machine it
goes five times as fast as my bsd box. What could be
the problem?
Make sure your ethernet card has the correct setting
wrt half-duplex v
At 10:10 PM -0500 11/25/02, David S. Jackson wrote:
Hi,
I've been trying to use |xargs -J [] mv [] [].suffix
but to no avail.
I've tried |xargs -J mv \[\] \[\].suffix and variations but that
doesn't seem to work either. It seems to work fine with the -i
command under GNU xargs, but not under F
At 1:43 PM -0800 11/26/02, Paul A. Scott wrote:
> From: Dan Nelson <[EMAIL PROTECTED]>
> Are you maybe running out of space on your local drive? You might
> also have a corrupted CVS repo, but I don't think you'd be getting
> those errors in that case.
No, I have over 40GB available on the f
At 12:48 PM +1030 12/8/02, Greg 'groggy' Lehey wrote:
I was at a local installfext yesterday
(http://installfest.auug.org.au/), and a number of people were
interested in doing diskless booting, either for reasons of economy
or reliability. I'm currently about to finish the manuscript of the
fourt
At 12:28 AM -0500 12/8/02, Garance A Drosihn wrote:
At 12:48 PM +1030 12/8/02, Greg 'groggy' Lehey wrote:
If *you* are interested, please let me know. I'll make a decision
depending on the amount of feedback I get.
There's at least two cases, right? diskless booting
At 12:54 PM -0800 12/8/02, Gary W. Swearingen wrote:
I mostly-wasted a bunch of time investigating web sites and
articles which had schemes for diskless booting, and then
discovered that the "picobsd" manpage told me everything I
needed to know (to set up a non-harddisk filtering bridge
booting of
At 8:02 PM +0200 12/21/02, [EMAIL PROTECTED] wrote:
> Are you using lpd or lprng (have to get that out of the way)
lpd
Is lpd running / listening? - Show me
iulian#ps -ax | grep lpd
4544 ?? Is 0:00.01 lpd
What does "lpc status all" return?
Nothing
What version of freebsd are yo
At 10:03 AM -0800 3/17/04, Matt Weatherford wrote:
Has anyone done this? Care to share your notes? :)
I want the AFS server, mainly. I dont care about the client.
I have not compiled or run the server, but some friends of
mine claim "it wasn't too hard to do". Compiling and running
a server on
At 5:19 PM -0800 3/22/04, Noah wrote:
I ask that you please be specific as to what you think is wrong
with my newsyslog.conf file because I cant seem to figure out
what you are talking about here? Looks like my newsyslog.conf
file matches the recommended config:
Hi.
I do not run apache at all, bu
At 5:48 AM + 4/3/04, Andy Miller wrote:
I am currently upgrading a Sparc64 system from 5.1 to 5.2.1.
buildworld was successful, as well as the build and install
of the kernel. After a reboot, I ran installworld and
received the following error message:
===> bin/csh
install -s -o root -g wheel
At 2:41 PM -0600 4/12/04, P.D. Seniura wrote:
Chuck Swiger wrote:
> It is not clear to me what problem you are trying to solve by
> the activities you are pursuing: perhaps you ought to install
> 5.2.1 or 4.9 from a .iso image and get on with other tasks,
> and revisit the issue of recompiling
At 7:53 PM -0500 5/13/04, Eric Crist wrote:
Hey list,
I re-ran the apsfilter setup routine, and now my printer
seems to work fine, except I can only print with:
# lpr -Paps1
I can't print from Kmail, or anything else, as I get the
following error:
A print error occurred. Error message received
At 8:16 PM +0200 5/10/04, Vivailsud Staff Member wrote:
Hello, I am in trouble with FreeBSD 4.9p, I have got dual
processor server (2 x Pentium II 400MHz) and I would like that
FreeBSD could be able to use the both of them. I have read that
you need to compile the kernel once again, but I would lik
At 1:41 PM +0800 8/12/03, Katinka Mills wrote:
I thought in the version with Freebsd 4.8 that you could
now use accounts with $ signs in them
The 'pw' command has been changed so that you can create
user accounts (and user groups) which end in a $. That's
all samba should need. I'm pretty sure th
At 3:13 PM +1000 8/5/03, jason fiddian wrote:
help please
we have lpd -l running to log daemon activities but where
does it log to?
It depends on what lines you have in /etc/syslog.conf.
You would want to check /var/log/lpd-errs, and you may
also see the lines in /var/log/messages.
If /var/log/lpd
At 12:04 PM -0700 9/8/03, Charlie Schluting wrote:
FBSD 5.1:
Using Bind9.2.2, and I have query logging turned on:
logging {
channel "querylog" { file "/var/log/query.lo~g"; print-time yes; };
category queries { querylog; };
};
After a logrotate, it stops logging completely. The permissions
ar
At 9:33 AM +0100 11/22/04, Stephan Fiebrandt wrote:
If you just need to expand your Mainboard with a SATA Controller,
all you need is a poor card with a Silicon chip on it (Sil 3112 etc).
I've seen cards starting at 10$. Almost all low-cost cards have this
chip series, meanwhile on 5.3 it should wo
At 11:08 AM +0100 11/22/04, Questions wrote:
Garance A Drosihn wrote:
At 9:33 AM +0100 11/22/04, Stephan Fiebrandt wrote:
If you just need to expand your Mainboard with a SATA Controller,
all you need is a poor card with a Silicon chip on it (Sil 3112 etc).
Unless something happened in the past
At 11:08 AM +0100 11/22/04, Questions wrote:
Garance A Drosihn wrote:
Unless something happened in the past week or so, you can still
have WRITE_DMA problems with the SiL 3112 if you connect a
"fake SATA" drive to it, such as some of the Western Digital
drives. ... These drives seem to
At 12:51 PM +0900 11/23/04, Rob wrote:
Laurence Sanford wrote:
Rob wrote:
With these simple tests, I come to the conclusion that
"make -j$n buildworld" is best with n = number of CPUs.
Does that make sense?
Rob.
This is what I've been telling people and usin
At 10:41 AM +0900 11/24/04, Rob wrote:
Garance A Drosihn wrote:
Also, did you do your benchmarking before or after the recent
fixes to -j processing? I haven't redone them after that change,
and I think it will be interesting to see what effect that has.
These tests were done on 5.3-Stable
At 12:02 AM -0200 12/6/04, Giuliano Cardozo Medalha wrote:
People,
After a cvsup, installworld and portupgrade ... I have installed
a new optimized kernel.
After that I have installed KDE3 in my FreeBSd 5.3 machine.
The problem is now /usr is 4 GB used against 1 G free.
How is possible to clean /us
At 10:07 AM -0500 12/11/04, munn wrote:
I have two FreeBSD machines running 4.10-RELEASE-p5. On machine A
newsyslog rolls over the log files perfectly, on Machine B I get
the message:
/var/log/auth.log.0: No such file or directory
The newsyslog.conf entries are :
MACHINE A: /var/log/auth.log
At 9:11 PM -0600 12/15/04, Adam wrote:
In Greg Lehey's book "The Complete FreeBSD" he reccomends changing
the default shell for users to bash shell. -p. 94
What are the Pro's/Con's of using bash as opposed to the other
shells?
Personal preferences, mostly. In my case, my first unix accounts
were s
At 12:58 AM -0600 3/12/03, Bob McCarty wrote:
JBMAC# make install
===> Installing for cups-1.1.18.0_4
===> cups-1.1.18.0_4 is already installed - perhaps an older version?
If so, you may wish to ``make deinstall'' and install
this port again by ``make reinstall'' to upgrade it properl
At 1:01 AM -0500 3/19/03, David Banning wrote:
If I install samba without cups, is it still possible to
print with samba?
I have a small network with a few win boxes and the samba
install is older. It doesn't have cups.
I am just wondering, since samba now installs cups by default,
whether it is a
At 12:04 PM -0500 3/24/03, Steve Bertrand wrote:
The current state of my app is ready for production, so I would
like to take a snapshot of it as is, then implement it. I would
like to leave this snapshot alone, and further develop in other
aspects of the program now. Am I correct with this method?
At 3:49 PM -0700 4/1/03, Danilo Fiorenzano wrote:
5.0-CURRENT with sources cvsup'd on March 30.
"portinstall vmware2" aborts with:
.../vmmon-only/freebsd/hostif.c: In function `FindMPN':
.../vmmon-only/freebsd/hostif.c:186: invalid operands to binary >>
*** Error code 1
Stop in /usr/ports/emulators
At 3:33 PM -0500 4/3/03, David Banning wrote:
what I would like to do is have windows boxes print to a unix
printer filter which would convert the file into pdf format
and put the file into a directory where it could be emailed
out.
Anyone tried this? First off, I tried modifying the printcap
if
At 12:08 PM +0300 7/2/03, Jim Xochellis wrote:
I suspected that some processes are confused because
a *new* log file is created and these processes are
making the assumption that their log file will be always
the same and perhaps they open it once and then work with
the FILE pointer.
If a program
At 1:19 PM -0500 1/28/03, Bill Moran wrote:
Mark wrote:
Is there a better way to manage lpd permissions than
specifying individual hosts in /etc/hosts.lpd? I have a
heterogeneous network here (there are a few Winder's machines
in addition to a bunch of Unix machines) that has a bunch of
At 8:39 PM +0100 2/3/03, Bjarne Wichmann Petersen wrote:
Hi!
I'm a bit pussled. I can print from OpenOffice and Phoenix.
But konq chokes:
"A print error occured. Error message received from system:
/usr/local/bin/lpr -P 'laserjet' '/var/tmp/kde-mekanix/kdeprint_pYNslYF' :
execution failed with
At 9:15 PM +0700 1/16/02, Pavel Burovsky wrote:
Excuse me for, perhaps, plaqued question.
FreeBSD 4.7-RELEASE (I obtained it from www.linuxcenter.ru) contains
the XFree86 server built on 5.0-CURRENT snapshot(anyway it so reported
by XFree86 server). Is it normal? FAQ says it's not.
I would pleas
At 8:44 PM -0800 2/8/03, chip wiegand wrote:
I just setup my new Epson C62 printer, works great on my freebsd box.
I am using samba to share it with the rest of the family pc's. They
see it in network neighborhood, connect, install the drivers, all
fine. but the test page won't print. Nothing ap
At 10:51 AM +0100 2/13/03, [EMAIL PROTECTED] wrote:
I'm kinda in the same situation : XP Pro, WMWare 3.2, several
virtual machines running fine (linux,w2k), but the freebsd
5-RELEASE is quite a pain to use in this env.
The guest OS keeps on slowing down, to the point that it's
unusable.
Kris Ken
At 11:48 AM +0100 3/2/03, Per olof Ljungmark wrote:
charles pelletier wrote:
how do you add a machine account in samba? i've already added
users using 'smbpasswd -a username password' but cannot for
the life of me remember how to add a machine to the samba
domain.
man smbpasswd
smbpasswd -m
Then
At 12:49 AM -0400 7/17/02, Bob Bomar wrote:
>I was trying to install VMware 3.1 on my FBSD box, when I got
>to the configureing part, it gave me this error:
>
>[bob@warrior] ~>sudo vmware-config.pl
>Password:
>Setup is unable to find the "insmod" program on your machine.
>Please make sure it is in
At 11:04 PM -0400 7/16/02, John Mills wrote:
>Hello -
>
>I would appreciate a bit more information on the 'world' and 'kernel'
>building process. Please point me at the right section of the Handbook
>or Greg's book if there is a succinct description.
>
>I have been doing 'CVSUP' followed by:
>
>#
At 3:17 PM +1000 7/21/02, Danny wrote:
>I have a FreeBSD running samba with a shared printer.
>
>Everytime I want to print something FreeBSD suddenly halts (keyboard
>doesn't work etc) and the OS produces the following error messages in
>/var/log/lpd-errs
>
> lpd[344]: lpd startup: logging=0
> l
At 6:30 PM -0700 7/23/02, Ed Yu wrote:
>When I try to run 'lpc restart all',
>it shows lp:
> cannot open lock file
>lp:
>lpc: unable to connect to /var/run/printer: no such
>file or directory
>lpc: check to see if the master 'lpd' process is
>running.
> couldn't start daemon
>
>
>However, ps
At 3:34 PM -0700 7/24/02, Ed Yu wrote:
>You are right. When I restart the machine after I
>uncommented LPD_ENABLE="YES", /var/run/printer shows
>up. I also did check /usr/local/sbin and there are lpc
>and lpd in it. I basically totally mixed LPR and
>LPRng.
Hmm. I am not completely sure I unders
101 - 152 of 152 matches
Mail list logo