[OSL | CCIE_Voice] IPexpert BLS Pricing - Voice

[Randall Crumm]

Hi,
I was wondering if the pricing of the BLS from IPexpert comes with rack time? 
And how much rack time does one generally need?

Also, are there current deals on their website good because it is year end or 
do they always discount their base rate

Thanks,

Randall Crumm | Voice and Network Engineer
Direct: (408) 490-6734 | Cell: (408) 507-2373
www.harmonicinc.com
[cid:image001.jpg@01CA83B4.BE791A40]

<>___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] Printing Proctor Labs

[Randall Crumm]

HI,
Is it me or can you not print the Proctor Guides with a duplexer? I configure 
it to use the duplexer and it is not working.

Thanks,

Randall Crumm | Voice and Network Engineer
Direct: (408) 490-6734 | Cell: (408) 507-2373
www.harmonicinc.com
[cid:image001.jpg@01CA8D5A.A432DBD0]

<>___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 47, Issue 14

[Randall Crumm]

IPX Technical Support just emailed me and said the Adobe plug-in does not allow 
duplex printing. I don't know why.

Anyway, thanks for those who answered.

HTH,
Randall




-Original Message-
From: ccie_voice-boun...@onlinestudylist.com 
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of 
ccie_voice-requ...@onlinestudylist.com
Sent: Monday, January 04, 2010 5:48 PM
To: ccie_voice@onlinestudylist.com
Subject: CCIE_Voice Digest, Vol 47, Issue 14

Send CCIE_Voice mailing list submissions to
ccie_voice@onlinestudylist.com

To subscribe or unsubscribe via the World Wide Web, visit
http://onlinestudylist.com/mailman/listinfo/ccie_voice
or, via email, send a message with subject or body 'help' to
ccie_voice-requ...@onlinestudylist.com

You can reach the person managing the list at
ccie_voice-ow...@onlinestudylist.com

When replying, please edit your Subject line so it is more specific
than "Re: Contents of CCIE_Voice digest..."


Today's Topics:

   1. Printing Proctor Labs (Randall Crumm)
   2. Re: CCIE Voice Written Exam Study Materials (Jeff Garvas)
   3. Re: Printing Proctor Labs (Amp)
   4. Re: Printing Proctor Labs (Mike Thompson)
   5. Re: CCIE Voice Written Exam Study Materials (Mike Thompson)


--

Message: 1
Date: Mon, 4 Jan 2010 16:26:17 -0800
From: Randall Crumm 
Subject: [OSL | CCIE_Voice] Printing Proctor Labs
To: "ccie_voice@onlinestudylist.com" 
Message-ID:
<9473270a65ca67458d287f3da3c9f37d0ed5138...@exch-cms.hlit.local>
Content-Type: text/plain; charset="us-ascii"

HI,
Is it me or can you not print the Proctor Guides with a duplexer? I configure 
it to use the duplexer and it is not working.

Thanks,

Randall Crumm | Voice and Network Engineer
Direct: (408) 490-6734 | Cell: (408) 507-2373
www.harmonicinc.com
[cid:image001.jpg@01CA8D5A.A432DBD0]

-- next part --
An HTML attachment was scrubbed...
URL: 
http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100104/ef7027b9/attachment-0001.htm
 
-- next part --
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 6607 bytes
Desc: image001.jpg
Url : 
http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100104/ef7027b9/attachment-0001.jpg
 

--

Message: 2
Date: Mon, 4 Jan 2010 20:02:00 -0500
From: Jeff Garvas 
Subject: Re: [OSL | CCIE_Voice] CCIE Voice Written Exam Study
Materials
To: A A 
Cc: ccie_voice@onlinestudylist.com
Message-ID:
<3f94dfab1001041702m3aae8b1cldecb5bc236138...@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"

Woops.  Reading the list before coffee in the morning :)   Glad someone
caught that, I was away from my email most of the day.

On Mon, Jan 4, 2010 at 2:57 PM, A A  wrote:

>  The link you posted is for the CCNA Voice QRSs.
>
> I'm sure you mean this one
> http://www.ciscopress.com/bookstore/product.asp?isbn=1587053330
>
>
> --
> Date: Mon, 4 Jan 2010 08:51:23 -0500
> From: j...@cia.net
> To: kck...@yahoo.com
> CC: ccie_voice@onlinestudylist.com
>
> Subject: Re: [OSL | CCIE_Voice] CCIE Voice Written Exam Study Materials
>
> I found the quick reference sheets to be very helpful after I missed the
> first attempt by a few points.
>
> http://www.ciscopress.com/bookstore/product.asp?isbn=1587057670
>
> Its an adobe ebook but you can print it if you prefer to read from paper.
>
> On Mon, Jan 4, 2010 at 7:41 AM, Ken Kov  wrote:
>
>   Does anyone have suggestions for study material for the latest CCIE
> Voice written exam? - Not places like Test King , etc.
>
> Thanks,
> Ken
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
>
>
> --
> New! Receive and respond to mail from other email accounts from within
> Hotmail Find out how. <http://clk.atdmt.com/UKM/go/186394593/direct/01/>
>
-- next part --
An HTML attachment was scrubbed...
URL: 
http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100104/30ce5ea5/attachment-0001.htm
 

--

Message: 3
Date: Mon, 04 Jan 2010 20:04:08 -0500
From: Amp 
Subject: Re: [OSL | CCIE_Voice] Printing Proctor Labs
To: ccie_voice@onlinestudylist.com
Message-ID: <20100104200408.95gfwq9yscwco...@www.cciequest.com>
Content-Type: text/plain;   charset=ISO-8859-1; DelSp="Yes";
format="flowed"

Hey Randall,
I had the same problem that you have but I was able to resolve the  
issue by not only setting the duplex setting in Adobe Reader but in  
the settings of the printer as well.

Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 47, Issue 14

[Randall Crumm]

Thanks Mike. I was configuring the duplex setting in the GUI and it was not 
working. I tested it with a Word doc and it worked, so it is related to the 
.pdf file from IPX or the plug-in as Tech Support said.

Thanks,
Randall



-Original Message-
From: Mike Thompson [mailto:mthompson...@gmail.com] 
Sent: Tuesday, January 05, 2010 9:47 AM
To: Randall Crumm; ccie_voice@onlinestudylist.com
Subject: RE: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 47, Issue 14

Randall,
   I don't remember if it was you that I emailed, but you can configure most
printers (that have an interactive display) and set ALL print jobs to duplex
on the printer.  Until completed, everything will obviously print in duplex,
but it addresses you issue.

-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Randall Crumm
Sent: Tuesday, January 05, 2010 12:23 PM
To: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 47, Issue 14

IPX Technical Support just emailed me and said the Adobe plug-in does not
allow duplex printing. I don't know why.

Anyway, thanks for those who answered.

HTH,
Randall




-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of
ccie_voice-requ...@onlinestudylist.com
Sent: Monday, January 04, 2010 5:48 PM
To: ccie_voice@onlinestudylist.com
Subject: CCIE_Voice Digest, Vol 47, Issue 14

Send CCIE_Voice mailing list submissions to
ccie_voice@onlinestudylist.com

To subscribe or unsubscribe via the World Wide Web, visit
http://onlinestudylist.com/mailman/listinfo/ccie_voice
or, via email, send a message with subject or body 'help' to
ccie_voice-requ...@onlinestudylist.com

You can reach the person managing the list at
ccie_voice-ow...@onlinestudylist.com

When replying, please edit your Subject line so it is more specific
than "Re: Contents of CCIE_Voice digest..."


Today's Topics:

   1. Printing Proctor Labs (Randall Crumm)
   2. Re: CCIE Voice Written Exam Study Materials (Jeff Garvas)
   3. Re: Printing Proctor Labs (Amp)
   4. Re: Printing Proctor Labs (Mike Thompson)
   5. Re: CCIE Voice Written Exam Study Materials (Mike Thompson)


--

Message: 1
Date: Mon, 4 Jan 2010 16:26:17 -0800
From: Randall Crumm 
Subject: [OSL | CCIE_Voice] Printing Proctor Labs
To: "ccie_voice@onlinestudylist.com" 
Message-ID:
<9473270a65ca67458d287f3da3c9f37d0ed5138...@exch-cms.hlit.local>
Content-Type: text/plain; charset="us-ascii"

HI,
Is it me or can you not print the Proctor Guides with a duplexer? I
configure it to use the duplexer and it is not working.

Thanks,

Randall Crumm | Voice and Network Engineer
Direct: (408) 490-6734 | Cell: (408) 507-2373
www.harmonicinc.com
[cid:image001.jpg@01CA8D5A.A432DBD0]

-- next part --
An HTML attachment was scrubbed...
URL:
http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100104/ef7027b
9/attachment-0001.htm 
-- next part --
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 6607 bytes
Desc: image001.jpg
Url :
http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100104/ef7027b
9/attachment-0001.jpg 

--

Message: 2
Date: Mon, 4 Jan 2010 20:02:00 -0500
From: Jeff Garvas 
Subject: Re: [OSL | CCIE_Voice] CCIE Voice Written Exam Study
Materials
To: A A 
Cc: ccie_voice@onlinestudylist.com
Message-ID:
<3f94dfab1001041702m3aae8b1cldecb5bc236138...@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"

Woops.  Reading the list before coffee in the morning :)   Glad someone
caught that, I was away from my email most of the day.

On Mon, Jan 4, 2010 at 2:57 PM, A A  wrote:

>  The link you posted is for the CCNA Voice QRSs.
>
> I'm sure you mean this one
> http://www.ciscopress.com/bookstore/product.asp?isbn=1587053330
>
>
> --
> Date: Mon, 4 Jan 2010 08:51:23 -0500
> From: j...@cia.net
> To: kck...@yahoo.com
> CC: ccie_voice@onlinestudylist.com
>
> Subject: Re: [OSL | CCIE_Voice] CCIE Voice Written Exam Study Materials
>
> I found the quick reference sheets to be very helpful after I missed the
> first attempt by a few points.
>
> http://www.ciscopress.com/bookstore/product.asp?isbn=1587057670
>
> Its an adobe ebook but you can print it if you prefer to read from paper.
>
> On Mon, Jan 4, 2010 at 7:41 AM, Ken Kov  wrote:
>
>   Does anyone have suggestions for study material for the latest CCIE
> Voice written exam? - Not places like Test King , etc.
>
> Thanks,
> Ken
>
>
> ___
> For more information

[OSL | CCIE_Voice] IPX Technical Support

[Randall Crumm]

Hi
Is IPX TS only open 9-5 local time?

Randall

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] rating a lab

[Randall Crumm]

Hi
I am just starting out and am doing lab 1B.

I am done and I thought I saw something before about rating/grading labs. Is 
this true we need to do something to have the lab graded or do we just look at 
the final configs.

Thanks

Randall

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] LAB 1A CME phone not registering

[Randall Crumm]

HI,
I am having a hard time getting the 1 phone on CME to register.

I am attaching my config

Thanks
Randall




lab 1A BR2-router.log
Description: lab 1A BR2-router.log
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] Voice boot camp

[Randall Crumm]

HI,
I was wondering when would you recommend taking the IP Experts Voice boot camp? 
 I have the BLS, but was wondering if/when I should schedule it?
How much is it? Also, how much do you think you benefited from it.

Thanks,

Randall

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] CME files for phones

[Randall Crumm]

Hi,
I want to know what are the four files in CME? I don't work with CME and I am 
looking at lab 3A
.bin
.loads
.sb2
.sbn

Thanks,
Randall



-Original Message-
From: ccie_voice-boun...@onlinestudylist.com 
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of 
ccie_voice-requ...@onlinestudylist.com
Sent: Tuesday, January 26, 2010 9:00 AM
To: ccie_voice@onlinestudylist.com
Subject: CCIE_Voice Digest, Vol 47, Issue 127

Send CCIE_Voice mailing list submissions to
ccie_voice@onlinestudylist.com

To subscribe or unsubscribe via the World Wide Web, visit
http://onlinestudylist.com/mailman/listinfo/ccie_voice
or, via email, send a message with subject or body 'help' to
ccie_voice-requ...@onlinestudylist.com

You can reach the person managing the list at
ccie_voice-ow...@onlinestudylist.com

When replying, please edit your Subject line so it is more specific
than "Re: Contents of CCIE_Voice digest..."


Today's Topics:

   1. Call Forward not working (Sivakumar Mahalingam)
   2. Re: MULTICAST MOH over SIP TRUNK? (Vccie Vccie)


--

Message: 1
Date: Tue, 26 Jan 2010 11:22:32 -0500
From: Sivakumar Mahalingam 
Subject: [OSL | CCIE_Voice] Call Forward not working
To: OSL Group 
Message-ID:
<703b51d01001260822y1df82b73se07cd3463a9f3...@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"

Hi All,

I need some help for the below issue that am facing.

I have CUCM 7.1.3(a) running on my VoIP network and the issue is ,when i
setup "forward all" for  Extn A to Extn B ,the off campus calls are
forwarded to Extn B correctly and the on campus calls are not being
forwarded and it rings the Extn A phone directly.

If anyone of you have faced a simillar kind of problem,please let me know
you thoughts.


Thanks,
Simah.
-- next part --
An HTML attachment was scrubbed...
URL: 
http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100126/da62b3f3/attachment-0001.htm
 

--

Message: 2
Date: Tue, 26 Jan 2010 10:29:43 -0600
From: Vccie Vccie 
Subject: Re: [OSL | CCIE_Voice] MULTICAST MOH over SIP TRUNK?
To: ccie_voice@onlinestudylist.com
Message-ID:
<8adf63bc1001260829x19043ec8kde845eed89336...@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"

After further testing I have confirmed that is indeed the IOS version that
is not allowing for the Multicast MOH over a SIP trunk to a PSTN
Termination.

Tested versions:
c2801-adventerprisek9_ivs-mz.124-20.T4.bin  = PSTN MOH DOESN"T WORK
c2801-adventerprisek9_ivs-mz.124-22.T.bin = PSTN MOH WORKS

Typology

SIP/SKINNYPHONE -> UCM (Multicast-PUB/MGRL) -> SIPTRUNK -> (HQ-2801 sourced
Multicast MOH) > PRI -> (PSTN-2821) ->PSTNPHONE

If any one know anything to the contrary to my findings please respond as I
am under the assumption that this is the final outcome.
Thank you
-- next part --
An HTML attachment was scrubbed...
URL: 
http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100126/97cae30a/attachment-0001.htm
 

--

___
CCIE_Voice mailing list
CCIE_Voice@onlinestudylist.com
http://onlinestudylist.com/mailman/listinfo/ccie_voice


End of CCIE_Voice Digest, Vol 47, Issue 127
***
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 48, Issue 21

[Randall Crumm]

I've seen this when all of the auto register DN's in the range have been used. 
They need to be deleted once you assign a device a new DN. You need to clean up 
the range by deleting the DN's under Call Routing/ Directory number

HTH,
Randall



-Original Message-
From: ccie_voice-boun...@onlinestudylist.com 
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of 
ccie_voice-requ...@onlinestudylist.com
Sent: Thursday, February 04, 2010 10:29 AM
To: ccie_voice@onlinestudylist.com
Subject: CCIE_Voice Digest, Vol 48, Issue 21

Send CCIE_Voice mailing list submissions to
ccie_voice@onlinestudylist.com

To subscribe or unsubscribe via the World Wide Web, visit
http://onlinestudylist.com/mailman/listinfo/ccie_voice
or, via email, send a message with subject or body 'help' to
ccie_voice-requ...@onlinestudylist.com

You can reach the person managing the list at
ccie_voice-ow...@onlinestudylist.com

When replying, please edit your Subject line so it is more specific
than "Re: Contents of CCIE_Voice digest..."


Today's Topics:

   1. Re: dhcp server - ip phone resgistration rejected (Roger K?llberg)
   2. Gatekeeper Question (Ravindra Lakpriya)
   3. Re: dhcp server - ip phone resgistration rejected
  (Jeff Price (jeffpric))
   4. SNR Issue (Arun Kumar)


--

Message: 1
Date: Thu, 4 Feb 2010 18:38:52 +0100
From: Roger K?llberg 
Subject: Re: [OSL | CCIE_Voice] dhcp server - ip phone resgistration
rejected
To: kavi ten , "ccie_voice@onlinestudylist.com"

Message-ID:
<79fa99add19eda4c9880d26d736e50ef2cf80c2...@ex2-sth.domain.root>
Content-Type: text/plain; charset="windows-1252"

Sound like a db replication issue or possibly, but less likely, the order of 
CPE in the call manager group.

Roger K?llberg
Unified Communication Consultant
Cygate AB


From: kavi ten [mailto:kaucc...@gmail.com]
Sent: den 4 februari 2010 14:23
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] dhcp server - ip phone resgistration rejected

Hi Guys,

I have my DHCP server as Publisher
DHCP Server: PUB
 Primary  TFTP : 10.10.210.11
  Secondary TFTP : 10.10.210.10


Auto reguistration enabed for SUB with range specified.

Now the phone shown in the Devices--> Phones page but Status Rejected
On the Phone it shows Rejectration Rejected: Security Error

When I auto register with PUB it registers properly.

What could be the problem when Auto regiosteration is enabled in the SUB.

Thanks,

-- next part --
An HTML attachment was scrubbed...
URL: 
http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100204/18af8796/attachment-0001.htm
 

--

Message: 2
Date: Thu, 4 Feb 2010 23:20:02 +0530
From: Ravindra Lakpriya 
Subject: [OSL | CCIE_Voice] Gatekeeper Question
To: ccie_voice@onlinestudylist.com
Message-ID:
<4535c2ca1002040950w7b84017ve53f2c009c721...@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"

Hello guys,

i was doing some testing on Gatekeeper configurations. i manage to register
GW's to the GK without any error. in those GW's  i was running CME. So all
the endpoint data is send to GK. and from the GK end we can see the CME end
point details. I can make the calls using the GK with out any errors.

But i have a question regarding a one H323 gateway which is registered with
the CUCM. its have a VOIP dial-peer to the CUCM box. When i issue show
gateway command it shows that its registered to the GK. when i execute show
gatekeeper endpoint i can see the endpoints but i cant see the specific
dial-peer which is directed to the CUCM.
And when  i try to dial a endpoint which is registered with the CUCM i cant
make the call. but i can make calls between the GW's which are running the
CME.

Any idea guys ?

-- 
Ravindra Lakpriya
+94 773 532 094
-- next part --
An HTML attachment was scrubbed...
URL: 
http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100204/b4f575f0/attachment-0001.htm
 

--

Message: 3
Date: Thu, 4 Feb 2010 11:54:41 -0600
From: "Jeff Price (jeffpric)" 
Subject: Re: [OSL | CCIE_Voice] dhcp server - ip phone resgistration
rejected
To: Roger K?llberg ,  "kavi ten"
, 
Message-ID:

Content-Type: text/plain; charset="iso-8859-1"

Kavi,

 

I am having the same issue.  I will let you know if I have any success in 
finding a solution.  I'm asking if you don't mind doing the same.  Thank you 
all for your help.

 

Jeff

 

From: ccie_voice-boun...@onlinestudylist.com 
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Roger K?llberg
Sent: Thursday, February 04, 2010 9:39 AM
To: kavi ten; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] dhcp server - ip phone resgistration rejected

 

Sound like a db replication issue or possibly, but less likely, the order of 
CPE in the call manager group.

 

Roger 

[OSL | CCIE_Voice] Are there 4 hour lab blocks yet

[Randall Crumm]

Anyone know if and when??

Thanks
Randall

Sent from my iPhone

On Feb 10, 2010, at 4:53 PM, "ccie_voice-requ...@onlinestudylist.com" 
 wrote:

> Send CCIE_Voice mailing list submissions to
>ccie_voice@onlinestudylist.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
>http://onlinestudylist.com/mailman/listinfo/ccie_voice
> or, via email, send a message with subject or body 'help' to
>ccie_voice-requ...@onlinestudylist.com
>
> You can reach the person managing the list at
>ccie_voice-ow...@onlinestudylist.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of CCIE_Voice digest..."
>
>
> Today's Topics:
>
>   1. lab 6 q 6.2 (sean hurricane)
>   2. Re: lab 6 q 6.2 (Amy Ryan)
>   3. PSTN config for labs 6 -10 (sean hurricane)
>   4. Re: BW Calculation Question (Otto Sanchez)
>   5. 1719 issue (Paul Dardinski)
>
>
> --
>
> Message: 1
> Date: Wed, 10 Feb 2010 15:36:58 -0500
> From: sean hurricane 
> Subject: [OSL | CCIE_Voice] lab 6 q 6.2
> To: ccie_voice@onlinestudylist.com
> Message-ID:
><29604bef1002101236i219a75f1g959777d9fb736...@mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> MWI lamp did not lamp as requested in question, see my config below
>
> voice register global
> mode cme
> source-address 10.10.202.1 port 5060
> max-dn 42
> max-pool 3
> load 7970 SIP70.8-4-4S
> load 7962 SIP42.8-4-4S
> authenticate register
> date-format YY-M-D
> hold-alert
> mwi stutter
> mwi reg-e164
> voicemail 3600
> tftp-path flash:
> create profile sync 0003600213441188
> ntp-server 10.1.100.2 mode unicast
> voice register dn  1
> number 3001
> call-forward b2bua busy 3600
> call-forward b2bua mailbox 3001
> call-forward b2bua noan 3600 timeout 12
> name BR2-PHN1
> mwi
> voice register dn  2
> number 3002
> call-forward b2bua busy 3600
> call-forward b2bua mailbox 3002
> call-forward b2bua noan 3600 timeout 12
> name BR2-PHN2
> mwi
> voice register dn  3
> number 3015
> voice register template  1
> dialplan 1
> softkeys idle  Cfwdall Newcall Redial
> voicemail 3600 timeout 12
> voice register template  2
> dialplan 1
> softkeys idle  Newcall Redial
> voice register dialplan  1
> type 7940-7960-others
> pattern 1 9112
> pattern 2 3...
> pattern 3 9001... timeout 2
> pattern 4 9001.. timeout 2
> pattern 5 9...
> voice register pool  1
> id mac 0019.30D4.CDA1
> type 7970
> number 1 dn 1
> template 2
> cor incoming BR2-ALL default
> dtmf-relay rtp-nte
> username 3001 password cisco
> description 5623001
> codec g711ulaw
> voice register pool  2
> id mac 0019.30C8.DC65
> type 7970
> number 1 dn 2
> number 2 dn 3
> template 1
> cor incoming BR2-ALL default
> dtmf-relay rtp-nte
> username 3002 password cisco
> description 5623002
> codec g711ulaw
> no vad
>
> sip-ua
> mwi-server ipv4:10.10.210.13 expires 3600 port 5060 transport udp
> unsolicited
>
> voice service voip
> allow-connections h323 to sip
> allow-connections sip to h323
> allow-connections sip to sip
> no supplementary-service sip moved-temporarily
> no supplementary-service sip refer
> sip
>  bind control source-interface FastEthernet0/0.400
>  bind media source-interface FastEthernet0/0.400
>  registrar server expires max 600 min 60
>
> And also unity phone system integration using sip, i can leave and
> retrieve
> messages but mwi lamp is not lit
>
> any thoughts?
> -- next part --
> An HTML attachment was scrubbed...
> URL: 
> http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100210/111f161a/attachment-0001.htm
>
> --
>
> Message: 2
> Date: Wed, 10 Feb 2010 17:01:55 -0500
> From: Amy Ryan 
> Subject: Re: [OSL | CCIE_Voice] lab 6 q 6.2
> To: sean hurricane ,
>
> Message-ID: 
> Content-Type: text/plain; charset="iso-8859-1"
>
> Sean,
>
> Try removing ?mwi stutter? from voice register global, create
> profile, reset
> and then initiate a resync from Unity Connection.
>
> HTH,
> Amy
>
>
> ---
> Amy Ryan ? CCIE #24677 (Voice)
> Technical Instructor - IPexpert, Inc.
> Mailto: ar...@ipexpert.com
> Telephone: +1.810.326.1444
> Live Assistance, Please visit: www.ipexpert.com/chat
> 
> eFax: +1.810.454.0130
>
> IPexpert is a premier provider of Classroom and Self-Study Cisco
> CCNA (R&S,
> Voice & Security), CCNP, CCVP, CCSP and CCIE (R&S, Voice, Security &
> Service
> Provider) Certification Training with locations throughout the United
> States, Europe and Australia. Be sure to check out our online
> communities at
> www.ipexpert.com/communities 
> and our
> public website at www.ipexpert.com  .
>
>
>
>
> From: sean hurricane 
> Date: Wed, 10 Feb 2010 15:36:58 -0500
> To: 
> Subject: [OSL | CCIE_Voice] lab 6 q 6.2
>
> MWI lamp did not lamp as requested in question, see my config below
>
> voice register 

Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 48, Issue 65

[Randall Crumm]

Sent from my iPhone

On Feb 10, 2010, at 12:15 PM, "ccie_voice-requ...@onlinestudylist.com"  
 wrote:

> Send CCIE_Voice mailing list submissions to
>ccie_voice@onlinestudylist.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
>http://onlinestudylist.com/mailman/listinfo/ccie_voice
> or, via email, send a message with subject or body 'help' to
>ccie_voice-requ...@onlinestudylist.com
>
> You can reach the person managing the list at
>ccie_voice-ow...@onlinestudylist.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of CCIE_Voice digest..."
>
>
> Today's Topics:
>
>   1. Re: EZVPN Connectivity (Roger K?llberg)
>   2. Vol 2 Q5.1 (vccie2010)
>   3. Re: Called Party Transformation Problem (ccieid1ot)
>
>
> --
>
> Message: 1
> Date: Wed, 10 Feb 2010 19:05:44 +0100
> From: Roger K?llberg 
> Subject: Re: [OSL | CCIE_Voice] EZVPN Connectivity
> To: "iy...@nationwide.com" , CCIE Voice OSL
>
> Message-ID:
><79fa99add19eda4c9880d26d736e50ef2d2cbbb...@ex2- 
> sth.domain.root>
> Content-Type: text/plain; charset="windows-1252"
>
> Hi Kalyan
> There are configuration examples for both router and switch on  
> Proctor Labs home page and also on their forum.
>
> For the physical connection it might look more like this.
>
> Cable modem ---> Linksys wireless router > 2801 Fa0/0 (VPN  
> outside)
>
> 2801 Fa 0/1 (VPN inside) > 3750 switch > Configuration  
> laptop/desktop
> 3750 switch ---> Your home hw phones
>
> With this setup you have your home network untouched, ie as it is  
> today, and your new IPExpert study home network will be separated  
> from this. The only new thing that will exist on the same IP network  
> as your other home stuff is the 2801 Fa0/0 interface that should  
> have a IP from that network range.
>
> And yes the config examples from PL do have DHCP scopes, but these  
> has nothing to do with your home DHCP scope that you have today in  
> your Linksys router. That should be kept as is.
>
>
> Best of luck,
>
>
> Roger K?llberg
> Consultant
> Cygate AB
> Eric Perssons v?g 21, SE-217 62 MALM?
>
> Direkt: +46108787498
> V?xel: +46108787400
> roger.kallb...@cygate.se
> 
> Fr?n: iy...@nationwide.com [iy...@nationwide.com]
> Skickat: den 10 februari 2010 18:31
> Till: CCIE Voice OSL
> ?mne: [OSL | CCIE_Voice] EZVPN Connectivity
>
>
> Hi folks,
>
> I am currently using the Software VPN with softphones to test the  
> lab configurations. I am using the IP Blue trial version and it  
> keeps restarting.  I would like to try the EZVPN connectivity with a  
> 2801 router (with Fa0/0 & Fa0/1), 3750 POE and  Cisco IP Phones  
> 7962. I have the cable modem connection for internet access with a  
> Linksys wireless router. The Linksys wireless router is set-up to do  
> dhcp.
>
> I have the following questions:
>
> 1) Should I connect the 2801 Fa0/0  directly to the cable modem? If  
> so, can I still use the wireless router while being connected to  
> EZVPN?
> 2) Should I disable the DHCP on the wireless router? Does the  
> standard Proctor labs configs include DHCP on the router?
> 3) Physical connectivity :  Cable modem ---> 2801 Fa0/0
>  2801 Fa 0/1 > 3750 switch >  
> Configuration laptop/desktop
>  3750 switch ---> Linksys wireless router
> Is this correct?
> 4) Is there any configuration on 3750 switch that need to be done?
>
> Any help in this regard is greatly appreciated.
>
> Thanks
> Kalyan
>
>
>
>
> -- next part --
> An HTML attachment was scrubbed...
> URL: 
> http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100210/ea5a7396/attachment-0001.htm
>
> --
>
> Message: 2
> Date: Wed, 10 Feb 2010 10:37:44 -0800
> From: vccie2010 
> Subject: [OSL | CCIE_Voice] Vol 2 Q5.1
> To: ccie_voice@onlinestudylist.com
> Message-ID:
>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Per the PG solutions the "dspfarm profile 1 transcode" does not show  
> "codec
> g729r8" it only shows "g279ar8 and g729abr8" don't we need "codec  
> G729r8"
> statement here since the traffic coming from UCM across GK will be  
> G729r8
> ???
> -- next part --
> An HTML attachment was scrubbed...
> URL: 
> http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100210/c4491e5f/attachment-0001.htm
>
> --
>
> Message: 3
> Date: Wed, 10 Feb 2010 14:14:11 -0600
> From: ccieid1ot 
> Subject: Re: [OSL | CCIE_Voice] Called Party Transformation Problem
> To: "Jeff Price (jeffpric)" 
> Cc: ccie_voice@onlinestudylist.com
> Message-ID:
>
> Content-Type: text/plain; charset="windows-1252"
>
> Make sure you reset the route list if you do any type of adding or
> stripping.
>
> On Wed, Feb 10, 2010 a

[OSL | CCIE_Voice] LAB 3A intital config issues

[Randall Crumm]

HI,
I have been racking my brain for a while now and give up.
I loaded the lab 3A initial config and it was missing OSPF config, VLAN  and 
interace configuration...And I am not sure what else. I reverted the pod twice 
and added some config in but I am still not able to register my phone and http 
to the router for GUI access.
The problem this is causing me is access from my PC so I can register my phone 
on my laptop.

Can someone look into this as why the config is missing so much?
Thanks,
Randall



From: ccie_voice-boun...@onlinestudylist.com 
[ccie_voice-boun...@onlinestudylist.com] On Behalf Of 
ccie_voice-requ...@onlinestudylist.com [ccie_voice-requ...@onlinestudylist.com]
Sent: Saturday, February 20, 2010 9:00 AM
To: ccie_voice@onlinestudylist.com
Subject: CCIE_Voice Digest, Vol 48, Issue 115

Send CCIE_Voice mailing list submissions to
ccie_voice@onlinestudylist.com

To subscribe or unsubscribe via the World Wide Web, visit
http://onlinestudylist.com/mailman/listinfo/ccie_voice
or, via email, send a message with subject or body 'help' to
ccie_voice-requ...@onlinestudylist.com

You can reach the person managing the list at
ccie_voice-ow...@onlinestudylist.com

When replying, please edit your Subject line so it is more specific
than "Re: Contents of CCIE_Voice digest..."


Today's Topics:

   1. VOL2 LAB 6 (kavi ten)
   2. VOL2 LAB 6 UCME with UC (kavi ten)


--

Message: 1
Date: Sat, 20 Feb 2010 18:55:30 +0400
From: kavi ten 
Subject: [OSL | CCIE_Voice] VOL2 LAB 6
To: ccie_voice@onlinestudylist.com
Message-ID:
<2115142c1002200655v44a9349ak12f9e2ab1058...@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"

Hi Guys,

I got stuck at the Teho dialing Question  4.5
I have the CME dial-peer configured & it works fine as the call to HQ/BR1
hits the GK
I also have the translation pattern configured to match the incoming call
same as in the PG
 1#39001972XXXFOR  330  with called no xformation
Still the call is not going to the BR1 gw & same the case with HQ calls

The call then dial from BR2 PRI as per the preference.

I can not understand how this should work as I have all parameter
configured.
Can some one guide me through how to go about this.

Thanks.
-- next part --
An HTML attachment was scrubbed...
URL: 
http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100220/28296b94/attachment-0001.htm

--

Message: 2
Date: Sat, 20 Feb 2010 19:58:10 +0400
From: kavi ten 
Subject: [OSL | CCIE_Voice] VOL2 LAB 6 UCME with UC
To: ccie_voice@onlinestudylist.com
Message-ID:
<2115142c1002200758j17a99b37t604b6ccdec7b8...@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"

Hi Guys,

When have the done the configuration as per the Guide, but the BR2 Phn1
phone on busy /noan , the incoming call gets disconnected.
I checked the debug  voice ccapi inout , which says disconnect cause of 19 ,
means no answer from the UC.

Has any one come across this problem.

Thanks
-- next part --
An HTML attachment was scrubbed...
URL: 
http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100220/73fa1cc5/attachment-0001.htm

--

___
CCIE_Voice mailing list
CCIE_Voice@onlinestudylist.com
http://onlinestudylist.com/mailman/listinfo/ccie_voice


End of CCIE_Voice Digest, Vol 48, Issue 115
***
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] LAB 3A initial config problems

[Randall Crumm]

I was on pod 15

Randall



-Original Message-
From: ccie_voice-boun...@onlinestudylist.com 
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of 
ccie_voice-requ...@onlinestudylist.com
Sent: Saturday, February 20, 2010 9:00 AM
To: ccie_voice@onlinestudylist.com
Subject: CCIE_Voice Digest, Vol 48, Issue 115

Send CCIE_Voice mailing list submissions to
ccie_voice@onlinestudylist.com

To subscribe or unsubscribe via the World Wide Web, visit
http://onlinestudylist.com/mailman/listinfo/ccie_voice
or, via email, send a message with subject or body 'help' to
ccie_voice-requ...@onlinestudylist.com

You can reach the person managing the list at
ccie_voice-ow...@onlinestudylist.com

When replying, please edit your Subject line so it is more specific
than "Re: Contents of CCIE_Voice digest..."


Today's Topics:

   1. VOL2 LAB 6 (kavi ten)
   2. VOL2 LAB 6 UCME with UC (kavi ten)


--

Message: 1
Date: Sat, 20 Feb 2010 18:55:30 +0400
From: kavi ten 
Subject: [OSL | CCIE_Voice] VOL2 LAB 6
To: ccie_voice@onlinestudylist.com
Message-ID:
<2115142c1002200655v44a9349ak12f9e2ab1058...@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"

Hi Guys,

I got stuck at the Teho dialing Question  4.5
I have the CME dial-peer configured & it works fine as the call to HQ/BR1
hits the GK
I also have the translation pattern configured to match the incoming call
same as in the PG
 1#39001972XXXFOR  330  with called no xformation
Still the call is not going to the BR1 gw & same the case with HQ calls

The call then dial from BR2 PRI as per the preference.

I can not understand how this should work as I have all parameter
configured.
Can some one guide me through how to go about this.

Thanks.
-- next part --
An HTML attachment was scrubbed...
URL: 
http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100220/28296b94/attachment-0001.htm
 

--

Message: 2
Date: Sat, 20 Feb 2010 19:58:10 +0400
From: kavi ten 
Subject: [OSL | CCIE_Voice] VOL2 LAB 6 UCME with UC
To: ccie_voice@onlinestudylist.com
Message-ID:
<2115142c1002200758j17a99b37t604b6ccdec7b8...@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"

Hi Guys,

When have the done the configuration as per the Guide, but the BR2 Phn1
phone on busy /noan , the incoming call gets disconnected.
I checked the debug  voice ccapi inout , which says disconnect cause of 19 ,
means no answer from the UC.

Has any one come across this problem.

Thanks
-- next part --
An HTML attachment was scrubbed...
URL: 
http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100220/73fa1cc5/attachment-0001.htm
 

--

___
CCIE_Voice mailing list
CCIE_Voice@onlinestudylist.com
http://onlinestudylist.com/mailman/listinfo/ccie_voice


End of CCIE_Voice Digest, Vol 48, Issue 115
***
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] Lab 4.4 Question

[Randall Crumm]

It looks like the requirement is to have OB call to 212 area code, the gw 
should fwd 10 digits(area code+7)
If so then should it be forward digits 10 and not 7?

Am I reading it wrong?

Thanks,
Randall

-Original Message-
From: ccie_voice-boun...@onlinestudylist.com 
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of 
ccie_voice-requ...@onlinestudylist.com
Sent: Wednesday, February 24, 2010 6:27 PM
To: ccie_voice@onlinestudylist.com
Subject: CCIE_Voice Digest, Vol 48, Issue 152

Send CCIE_Voice mailing list submissions to
ccie_voice@onlinestudylist.com

To subscribe or unsubscribe via the World Wide Web, visit
http://onlinestudylist.com/mailman/listinfo/ccie_voice
or, via email, send a message with subject or body 'help' to
ccie_voice-requ...@onlinestudylist.com

You can reach the person managing the list at
ccie_voice-ow...@onlinestudylist.com

When replying, please edit your Subject line so it is more specific
than "Re: Contents of CCIE_Voice digest..."


Today's Topics:

   1. Re: SDI or CCM trace logs in CCM 7 (Tanner Ezell)
   2. Re: SDI or CCM trace logs in CCM 7 (t n)
   3. Re: + dialing (Otto Sanchez)
   4. Display IE and MGCP interaction (t n)
   5. Re: Display IE and MGCP interaction (t n)


--

Message: 1
Date: Wed, 24 Feb 2010 17:02:42 -0500
From: Tanner Ezell 
Subject: Re: [OSL | CCIE_Voice] SDI or CCM trace logs in CCM 7
To: t n 
Cc: OSL Group 
Message-ID:
<9c4f122d1002241402s50bd68b6mde142aa66b767...@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

Yea, RTMT pretty much sucks :)

On Wed, Feb 24, 2010 at 4:59 PM, t n  wrote:
> You can also from the shell:
>
> file list activelog /
> file list activelog /cm/trace/ccm/sdi/
> then file view
> file view activelog /cm/trace/ccm/sdi/ccm0001.txt
>
>
> RTMT is better although it can be much better.
>
>
>



--
Regards,
Tanner Ezell


--

Message: 2
Date: Wed, 24 Feb 2010 17:16:49 -0500
From: t n 
Subject: Re: [OSL | CCIE_Voice] SDI or CCM trace logs in CCM 7
To: Tanner Ezell 
Cc: OSL Group 
Message-ID:

Content-Type: text/plain; charset="iso-8859-1"

Yup. :)

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/cucos/5_1_1/iptpappa.html#wp1009409

admin:file search activelog cm/trace/ccm/sdi/ccm0004.txt
10\.10\.200\.254

Searching path: /var/log/active/cm/trace/ccm/sdi/ccm0004.txt
Searching file: /var/log/active/cm/trace/ccm/sdi/ccm0004.txt
02/10/2010 20:11:14.924 CCM|StationD:(002) DND settings from TSP:
status=0, option=0,
ringSetting=5|
02/10/2010 20:12:13.118 CCM|StationD:(003) DND settings from TSP:
status=0, option=0,
ringSetting=5|
|
02/10/2010 20:14:52.557 CCM|ConnectionManager - wait_AuDisconnectRequest
ERROR:NO ENTRY FOUND IN
TABLE,CI(30237231,30237232),dcType=1,IFCreated(0,0),PID(0-0,0-0),IFHandling(0,0),MCNode(0,0)|
02/10/2010 20:14:52.558 CCM|MatrixControl:updatePartyMediaCoordinatorNodeId:
party1 videoCapable=0, party 2
videocapable=0|
|
-- next part --
An HTML attachment was scrubbed...
URL: 
http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100224/6e86e814/attachment-0001.htm

--

Message: 3
Date: Wed, 24 Feb 2010 19:52:43 -0430
From: Otto Sanchez 
Subject: Re: [OSL | CCIE_Voice] + dialing
To: Cristobal Priego 
Cc: ccie_voice@onlinestudylist.com
Message-ID:

Content-Type: text/plain; charset="iso-8859-1"

Hi Cris,

Please try first to globalize the calling number (TP) and have that number
on the phone display and call directories. When you are sure everything is
working as desired, use the cg xform patterns as discussed before to
localize the phone display, after that, you still should see the calling
number's globalized form in the phone directories. Use the 7941s you have
for testing this feature,

Thanks,

On Wed, Feb 24, 2010 at 3:53 PM, Cristobal Priego  wrote:

> The issue was the predot
>
> i have a question now, when i call i see on the display 4 digits, and if i
> don't answer the call i only see the 4 digits, what do i need to do to see
> internal missed calls to display the globalized number?
>
> thanks
>
> 2010/2/23 Cristobal Priego 
>
> I didn't have the predot
>> maybe that's why
>> I'm using a couple of 7921's and 7941's and an IPC (i know this soft phone
>> doesn't support the + dialing)
>>
>> 2010/2/22 Otto Sanchez 
>>
>> Hi Cris,
>>>
>>> Excelente!, espero estes bien!,
>>>
>>> I assume you have a cg xform pattern in a separate pt that is reachable
>>> from the "Calling Party Transformation CSS" css setting on the phone. Does
>>> that pattern look like this:
>>>
>>> \+1916251. with Discard Digit Instructions predot or Calling Party
>>> Transformation Mask ,
>>>
>>> Please double check this, also, just curious what phone type are you
>>> using?,
>>>
>>> Thanks,
>>>
>>>
>>>
>>> On Mon, Feb 22, 2010 at 4:31 PM, Cristobal Priego <
>>> cristo

[OSL | CCIE_Voice] Lab 4A problems- All equipment is in error when loading initial configs

[Randall Crumm]

HI,
I am getting errors loading all the equipment except br2.
I have reverted and loaded the whole POD twice

What do I do???

Randall



-Original Message-
From: ccie_voice-boun...@onlinestudylist.com 
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of 
ccie_voice-requ...@onlinestudylist.com
Sent: Sunday, February 28, 2010 10:46 AM
To: ccie_voice@onlinestudylist.com
Subject: CCIE_Voice Digest, Vol 48, Issue 161

Send CCIE_Voice mailing list submissions to
ccie_voice@onlinestudylist.com

To subscribe or unsubscribe via the World Wide Web, visit
http://onlinestudylist.com/mailman/listinfo/ccie_voice
or, via email, send a message with subject or body 'help' to
ccie_voice-requ...@onlinestudylist.com

You can reach the person managing the list at
ccie_voice-ow...@onlinestudylist.com

When replying, please edit your Subject line so it is more specific
than "Re: Contents of CCIE_Voice digest..."


Today's Topics:

   1. Re: 7961 Factory Reset now Stuck in Upgrading (Roger K?llberg)
   2. Re: 7961 Factory Reset now Stuck in Upgradin (Kamran Ahsanullah)
   3. Re: [cisco-voip] SIP & SK phones show different   time in CME
  (Jason Aarons (US))
   4. Re: 7961 Factory Reset now Stuck in Upgradin (CCIETalk.com)


--

Message: 1
Date: Sun, 28 Feb 2010 18:36:39 +0100
From: Roger K?llberg 
Subject: Re: [OSL | CCIE_Voice] 7961 Factory Reset now Stuck in
Upgrading
To: CCIETalk.com , Jeff Garvas 
Cc: "ccie_voice@onlinestudylist.com" 
Message-ID:
<79fa99add19eda4c9880d26d736e50ef2d2cbbb...@ex2-sth.domain.root>
Content-Type: text/plain; charset="utf-8"

Try this,

Cisco 7965 SCCP to SIP Firmware Upgrade
November 17th, 2009 by Mark

Recently I needed to change the firmware on some Cisco 7965 phones from SCCP to 
SIP. By far the simplest method is loading the COP file on UCM and letting the 
phone upgrade on its own.  In my case, this upgrade was being done without 
using UCM.  The Cisco read-me doc for the SIP firmware covers the COP upgrade 
procedure only.  It tells you that you may unzip the files on a TFTP server but 
there is no procedure which explains what else you must do to load the SIP 
firmware.

In this example I am upgrading Cisco 7965 phones to SIP firmware 8.5.  Once you 
have downloaded the zipped version of the SIP firmware from CCO place the 
unzipped files in your TFTP servers root directory.  Modify your 
XMLDefaults.cnf.xml file so the load information matches your firmware.

SIP45.8-5-3TH1

You should connect your IP phone to LAN where DHCP provides the IP, subnet, and 
TFTP server IP.  Make sure your phone has DHCP enabled = YES. Your DHCP server 
needs to support DHCP Options.  TFTP option 66 is required for Cisco phones 
running SIP.  Option 66 can be used to provide an IP address (recommended) but 
can also support a DNS names (assuming you are also providing at least one DNS 
server IP via DHCP).  Option 150 only supports IP addresses and is required for 
SCCP firmware.  You can safely configure your DHCP to issue both TFTP options.

Next pull the power from your phone and plug it back in.  Hold down # until the 
line keys start to blink and press 123456789*0# and your phone should reset.  
Your phone should display ?Upgrading? on the screen.  If you are using a Unix 
based tftp server you can execute tcpdump port 69 and you should see your phone 
requesting the files.  Your phone should display the progress of the SIP 
firmware upgrade and eventually reboot.  After it reboots you can press 
Settings > Model Information and scroll down until you see the Call Control 
Protocol = SIP.

If you performed a factory reset and did not have DHCP enabled then your phone 
is most likely stuck at the Upgrading screen. Pressing keys on the phone will 
not change the status. At this point you should pull the power, plug it back 
in, hold # and then enter the keys 3491672850*# to factory reset the phone.  
This allows the phone to clear its flash and still download new firmware.  Your 
screen is going to be totally black and it will appear as if your phone is not 
functional, but the phone is really sending a DHCP request and waiting for an 
IP, subnet, and TFTP IP assignment before proceeding to download the firmware.  
All of this is happening while the phone?s screen is black. If you want to read 
the official word on this, Cisco has a field 
notice on their web site.  
Monitoring tcpdump on the TFTP server is useful in this case because you know 
the phone is doing something.  Also, you can view the DHCP bindings to verify yo
 ur phone successfully acquired an IP address.


Copyed from www.markholloway.com

it might help.

Brgds,
Roger K?llberg
Consultant
Cygate AB
Eric Perssons v?g 21, SE-217 62 MALM?

Direkt: +46108787498
V?xel: +46108787400
roger.kallb...@cygate.se

Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 48, Issue 161

[Randall Crumm]

Sent from my iPhone

On Feb 28, 2010, at 10:45 AM, "ccie_voice-requ...@onlinestudylist.com"  
 wrote:

> Send CCIE_Voice mailing list submissions to
>ccie_voice@onlinestudylist.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
>http://onlinestudylist.com/mailman/listinfo/ccie_voice
> or, via email, send a message with subject or body 'help' to
>ccie_voice-requ...@onlinestudylist.com
>
> You can reach the person managing the list at
>ccie_voice-ow...@onlinestudylist.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of CCIE_Voice digest..."
>
>
> Today's Topics:
>
>   1. Re: 7961 Factory Reset now Stuck in Upgrading (Roger K?llberg)
>   2. Re: 7961 Factory Reset now Stuck in Upgradin (Kamran Ahsanullah)
>   3. Re: [cisco-voip] SIP & SK phones show differenttime in CME
>  (Jason Aarons (US))
>   4. Re: 7961 Factory Reset now Stuck in Upgradin (CCIETalk.com)
>
>
> --
>
> Message: 1
> Date: Sun, 28 Feb 2010 18:36:39 +0100
> From: Roger K?llberg 
> Subject: Re: [OSL | CCIE_Voice] 7961 Factory Reset now Stuck in
>Upgrading
> To: CCIETalk.com , Jeff Garvas 
> Cc: "ccie_voice@onlinestudylist.com" 
> Message-ID:
><79fa99add19eda4c9880d26d736e50ef2d2cbbb...@ex2-sth.domain.root>
> Content-Type: text/plain; charset="utf-8"
>
> Try this,
>
> Cisco 7965 SCCP to SIP Firmware Upgrade
> November 17th, 2009 by Mark
>
> Recently I needed to change the firmware on some Cisco 7965 phones  
> from SCCP to SIP. By far the simplest method is loading the COP file  
> on UCM and letting the phone upgrade on its own.  In my case, this  
> upgrade was being done without using UCM.  The Cisco read-me doc for  
> the SIP firmware covers the COP upgrade procedure only.  It tells  
> you that you may unzip the files on a TFTP server but there is no  
> procedure which explains what else you must do to load the SIP  
> firmware.
>
> In this example I am upgrading Cisco 7965 phones to SIP firmware  
> 8.5.  Once you have downloaded the zipped version of the SIP  
> firmware from CCO place the unzipped files in your TFTP servers root  
> directory.  Modify your XMLDefaults.cnf.xml file so the load  
> information matches your firmware.
>
> SIP45.8-5-3TH1
>
> You should connect your IP phone to LAN where DHCP provides the IP,  
> subnet, and TFTP server IP.  Make sure your phone has DHCP enabled =  
> YES. Your DHCP server needs to support DHCP Options.  TFTP option 66  
> is required for Cisco phones running SIP.  Option 66 can be used to  
> provide an IP address (recommended) but can also support a DNS names  
> (assuming you are also providing at least one DNS server IP via  
> DHCP).  Option 150 only supports IP addresses and is required for  
> SCCP firmware.  You can safely configure your DHCP to issue both  
> TFTP options.
>
> Next pull the power from your phone and plug it back in.  Hold down  
> # until the line keys start to blink and press 123456789*0# and your  
> phone should reset.  Your phone should display ?Upgrading? on the  
> screen.  If you are using a Unix based tftp server you can execute  
> tcpdump port 69 and you should see your phone requesting the files.   
> Your phone should display the progress of the SIP firmware upgrade  
> and eventually reboot.  After it reboots you can press Settings >  
> Model Information and scroll down until you see the Call Control  
> Protocol = SIP.
>
> If you performed a factory reset and did not have DHCP enabled then  
> your phone is most likely stuck at the Upgrading screen. Pressing  
> keys on the phone will not change the status. At this point you  
> should pull the power, plug it back in, hold # and then enter the  
> keys 3491672850*# to factory reset the phone.  This allows the phone  
> to clear its flash and still download new firmware.  Your screen is  
> going to be totally black and it will appear as if your phone is not  
> functional, but the phone is really sending a DHCP request and  
> waiting for an IP, subnet, and TFTP IP assignment before proceeding  
> to download the firmware.  All of this is happening while the phone? 
> s screen is black. If you want to read the official word on this,  
> Cisco has a field notice > on their web site.  Monitoring tcpdump on the TFTP server is  
> useful in this case because you know the phone is doing something.   
> Also, you can view the DHCP bindings to verify yo
> ur phone successfully acquired an IP address.
>
>
> Copyed from www.markholloway.com
>
> it might help.
>
> Brgds,
> Roger K?llberg
> Consultant
> Cygate AB
> Eric Perssons v?g 21, SE-217 62 MALM?
>
> Direkt: +46108787498
> V?xel: +46108787400
> roger.kallb...@cygate.se
> 
> Fr?n: CCIETalk.com [cciet...@gmail.com]
> Skickat: den 28 februari 2010 02:20

[OSL | CCIE_Voice] Lab 5.2 wb1

[Randall Crumm]

Hi,
I am trying to create a RG for BR1(MGCP) and it is not available in the list of 
available devices.

I see it is registered in ccm
The show ccm-manager look correct


Any thoughts?


___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] Lab 5.2 wb1

[Randall Crumm]

Thanks Roger.
That may have been the case. I just deleted it and started over. It is working 
now.


I'll keep that in mind.

Thanks again

Randall



From: Roger Henderson [mailto:rhender...@gmail.com]
Sent: Sunday, May 16, 2010 4:17 PM
To: Randall Crumm
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Lab 5.2 wb1

Is there an RP pointing directly at the BR1(MGCP) gateway? Check the dependency 
records for the gateway if you aren't sure.

Roger

On Mon, May 17, 2010 at 8:23 AM, Randall Crumm 
mailto:randall.cr...@harmonicinc.com>> wrote:
Hi,
I am trying to create a RG for BR1(MGCP) and it is not available in the list of 
available devices.

I see it is registered in ccm
The show ccm-manager look correct


Any thoughts?


___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com<http://www.ipexpert.com>

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

[OSL | CCIE_Voice] WB 1 LAB 5C General question

[Randall Crumm]

HI,
In lab 5c we first start out br1 with 7 digit ani, then it moves to 10 and we 
have to add a lot of translation patterns to make the ani 10 digits.

Why can we just adjust the calling transformation pattern to 10 digit? Can we 
just change the calling transformation pattern in the real lab?

Thanks,
Randall

 

-Original Message-
From: ccie_voice-boun...@onlinestudylist.com 
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of 
ccie_voice-requ...@onlinestudylist.com
Sent: Sunday, May 23, 2010 9:00 AM
To: ccie_voice@onlinestudylist.com
Subject: CCIE_Voice Digest, Vol 51, Issue 129

Send CCIE_Voice mailing list submissions to
ccie_voice@onlinestudylist.com

To subscribe or unsubscribe via the World Wide Web, visit
http://onlinestudylist.com/mailman/listinfo/ccie_voice
or, via email, send a message with subject or body 'help' to
ccie_voice-requ...@onlinestudylist.com

You can reach the person managing the list at
ccie_voice-ow...@onlinestudylist.com

When replying, please edit your Subject line so it is more specific
than "Re: Contents of CCIE_Voice digest..."


Today's Topics:

   1. Re: Not getting "PLUS" on my Phones (Ashar Siddiqui)
   2. CME background image 7961 (Ashar Siddiqui)


--

Message: 1
Date: Sun, 23 May 2010 15:29:55 +0100
From: Ashar Siddiqui 
Subject: Re: [OSL | CCIE_Voice] Not getting "PLUS" on my Phones
To: Ehab Salem 
Cc: ccie_voice@onlinestudylist.com
Message-ID: <4bf93be3.8070...@gmail.com>
Content-Type: text/plain; charset="us-ascii"

An HTML attachment was scrubbed...
URL: 
http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100523/5e8d1bc5/attachment.html
 

--

Message: 2
Date: Sun, 23 May 2010 16:19:06 +0100
From: Ashar Siddiqui 
Subject: [OSL | CCIE_Voice] CME background image 7961
To: "ccie_voice@onlinestudylist.com" 
Message-ID: <4bf9476a.9090...@gmail.com>
Content-Type: text/plain; charset="us-ascii"

An HTML attachment was scrubbed...
URL: 
http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100523/7e1cda66/attachment-0001.htm
 

--

___
CCIE_Voice mailing list
CCIE_Voice@onlinestudylist.com
http://onlinestudylist.com/mailman/listinfo/ccie_voice


End of CCIE_Voice Digest, Vol 51, Issue 129
***
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] WB 1 LAB 5C General question

[Randall Crumm]

OK,
So how often does the proctor come by to verify? Would he come by and verify 
all of lab 5 steps and score each step? 

Thanks,
Randall



hieng [mailto:r.ochi...@mfient.com] 
Sent: Sunday, May 23, 2010 11:34 PM
To: Randall Crumm
Cc: ccie_voice@onlinestudylist.com
Subject: RE: [OSL | CCIE_Voice] WB 1 LAB 5C General question

Then break say question 5.3 requirement that when calling 911 it should be 7
digits ANI? You'll get zero point there.

The target is to ensure that all the requirements spelt out in the question
are met at the end of all those configurations you can do.

-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Randall Crumm
Sent: Monday, May 24, 2010 8:57 AM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] WB 1 LAB 5C General question

HI,
In lab 5c we first start out br1 with 7 digit ani, then it moves to 10 and
we have to add a lot of translation patterns to make the ani 10 digits.

Why can we just adjust the calling transformation pattern to 10 digit? Can
we just change the calling transformation pattern in the real lab?

Thanks,
Randall

 

-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of
ccie_voice-requ...@onlinestudylist.com
Sent: Sunday, May 23, 2010 9:00 AM
To: ccie_voice@onlinestudylist.com
Subject: CCIE_Voice Digest, Vol 51, Issue 129

Send CCIE_Voice mailing list submissions to
ccie_voice@onlinestudylist.com

To subscribe or unsubscribe via the World Wide Web, visit
http://onlinestudylist.com/mailman/listinfo/ccie_voice
or, via email, send a message with subject or body 'help' to
ccie_voice-requ...@onlinestudylist.com

You can reach the person managing the list at
ccie_voice-ow...@onlinestudylist.com

When replying, please edit your Subject line so it is more specific
than "Re: Contents of CCIE_Voice digest..."


Today's Topics:

   1. Re: Not getting "PLUS" on my Phones (Ashar Siddiqui)
   2. CME background image 7961 (Ashar Siddiqui)


--

Message: 1
Date: Sun, 23 May 2010 15:29:55 +0100
From: Ashar Siddiqui 
Subject: Re: [OSL | CCIE_Voice] Not getting "PLUS" on my Phones
To: Ehab Salem 
Cc: ccie_voice@onlinestudylist.com
Message-ID: <4bf93be3.8070...@gmail.com>
Content-Type: text/plain; charset="us-ascii"

An HTML attachment was scrubbed...
URL:
http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100523/5e8d1bc
5/attachment.html 

--

Message: 2
Date: Sun, 23 May 2010 16:19:06 +0100
From: Ashar Siddiqui 
Subject: [OSL | CCIE_Voice] CME background image 7961
To: "ccie_voice@onlinestudylist.com" 
Message-ID: <4bf9476a.9090...@gmail.com>
Content-Type: text/plain; charset="us-ascii"

An HTML attachment was scrubbed...
URL:
http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100523/7e1cda6
6/attachment-0001.htm 

--

___
CCIE_Voice mailing list
CCIE_Voice@onlinestudylist.com
http://onlinestudylist.com/mailman/listinfo/ccie_voice


End of CCIE_Voice Digest, Vol 51, Issue 129
***
___
For more information regarding industry leading CCIE Lab training, please
visit www.ipexpert.com


___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 51, Issue 132

[Randall Crumm]

Thanks everyone who answered I appreciate your feedback

Randall



-Original Message-
From: ccie_voice-boun...@onlinestudylist.com 
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of 
ccie_voice-requ...@onlinestudylist.com
Sent: Monday, May 24, 2010 3:48 AM
To: ccie_voice@onlinestudylist.com
Subject: CCIE_Voice Digest, Vol 51, Issue 132

Send CCIE_Voice mailing list submissions to
ccie_voice@onlinestudylist.com

To subscribe or unsubscribe via the World Wide Web, visit
http://onlinestudylist.com/mailman/listinfo/ccie_voice
or, via email, send a message with subject or body 'help' to
ccie_voice-requ...@onlinestudylist.com

You can reach the person managing the list at
ccie_voice-ow...@onlinestudylist.com

When replying, please edit your Subject line so it is more specific
than "Re: Contents of CCIE_Voice digest..."


Today's Topics:

   1. WB 1 LAB 5C General question (Randall Crumm) (Kamran Ahsanullah)


--

Message: 1
Date: Mon, 24 May 2010 13:47:28 +0300
From: Kamran Ahsanullah 
Subject: [OSL | CCIE_Voice] WB 1 LAB 5C General question (Randall
Crumm)
To: ccie_voice@onlinestudylist.com
Message-ID:

Content-Type: text/plain; charset="iso-8859-1"

Randall,

The proctor will only mark the exam once you have finished and left the
room.
There will be no progressive verification by the proctor during the exam.

Kamran

On 24 May 2010 13:25,  wrote:

> Send CCIE_Voice mailing list submissions to
>ccie_voice@onlinestudylist.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
>http://onlinestudylist.com/mailman/listinfo/ccie_voice
> or, via email, send a message with subject or body 'help' to
>ccie_voice-requ...@onlinestudylist.com
>
> You can reach the person managing the list at
>ccie_voice-ow...@onlinestudylist.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of CCIE_Voice digest..."
>
>
> Today's Topics:
>
>   1. Re: WB 1 LAB 5C General question (Randall Crumm)
>   2. Re: WB 1 LAB 5C General question (Rogers Ochieng)
>   3. CME - direct incoming call from PSTN (Terrence Ovi)
>   4. Re: CME - direct incoming call from PSTN (Angel Perez)
>   5. Re: WB 1 LAB 5C General question (Graham Hopkins)
>   6. Re: Not getting "PLUS" on my Phones (Roger K?llberg)
>
>
> --
>
> Message: 1
> Date: Sun, 23 May 2010 23:48:18 -0700
> From: Randall Crumm 
> Subject: Re: [OSL | CCIE_Voice] WB 1 LAB 5C General question
> To: "r.ochi...@mfient.com" 
> Cc: "ccie_voice@onlinestudylist.com" 
> Message-ID:
><9473270a65ca67458d287f3da3c9f37d0ff2867...@exch-cms.hlit.local>
> Content-Type: text/plain; charset="us-ascii"
>
> OK,
> So how often does the proctor come by to verify? Would he come by and
> verify all of lab 5 steps and score each step?
>
> Thanks,
> Randall
>
>
>
> hieng [mailto:r.ochi...@mfient.com]
> Sent: Sunday, May 23, 2010 11:34 PM
> To: Randall Crumm
> Cc: ccie_voice@onlinestudylist.com
> Subject: RE: [OSL | CCIE_Voice] WB 1 LAB 5C General question
>
> Then break say question 5.3 requirement that when calling 911 it should be
> 7
> digits ANI? You'll get zero point there.
>
> The target is to ensure that all the requirements spelt out in the question
> are met at the end of all those configurations you can do.
>
> -Original Message-
> From: ccie_voice-boun...@onlinestudylist.com
> [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Randall Crumm
> Sent: Monday, May 24, 2010 8:57 AM
> To: ccie_voice@onlinestudylist.com
> Subject: [OSL | CCIE_Voice] WB 1 LAB 5C General question
>
> HI,
> In lab 5c we first start out br1 with 7 digit ani, then it moves to 10 and
> we have to add a lot of translation patterns to make the ani 10 digits.
>
> Why can we just adjust the calling transformation pattern to 10 digit? Can
> we just change the calling transformation pattern in the real lab?
>
> Thanks,
> Randall
>
>
>
> -Original Message-
> From: ccie_voice-boun...@onlinestudylist.com
> [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of
> ccie_voice-requ...@onlinestudylist.com
> Sent: Sunday, May 23, 2010 9:00 AM
> To: ccie_voice@onlinestudylist.com
> Subject: CCIE_Voice Digest, Vol 51, Issue 129
>
> Send CCIE_Voice mailing list submissions to
>ccie_voice@onlinestudylist.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
>http://onlinestudylist.com/mailman/listinfo/ccie_voice
> or, via e

[OSL | CCIE_Voice] unitycn/SIP congestion problem

[Randall Crumm]

HI,
I have intergrated UCM and UC via SIP trunk. 5600 is my VM pilot.
Now I am having a problem when location CAC is lowered below 1 call. 
I have a RL wit the SIP trunk and BR1 GW. I prefixed 1408777 to the br1 RL.
I see the call rerouted to the HQ rtr but the call does not complete.
 
Any ideas to look for? I have exhausted myself.
 
Thanks,
Randall___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] MGCP GW will not register in CM -- Unknown

[Randall Crumm]

HI,

Having an issue in Call Manager. My br1 config looks good just can't get
it to register in call manager.



Any ideas? I've reloaded the router, deleted the GW and recreated it. No
mgcp and mgcp. Etc...



Here are snipit of the config and CUCM page



BR1-RTR(config)#do show ccm

MGCP Domain Name: BR1-RTR.proctorlabs.com

PriorityStatus   Host



Primary Registered   10.10.210.11

First BackupBackup Ready 10.10.210.10

Second Backup   None



Current active Call Manager:10.10.210.11

Backhaul/Redundant link port:   2428

Failover Interval:  30 seconds

Keepalive Interval: 15 seconds

Last keepalive sent:11:48:05 EST May 14 2011 (elapsed time:
00:00:07)

Last MGCP traffic time: 11:48:05 EST May 14 2011 (elapsed time:
00:00:07)

Last failover time: 11:11:05 EST May 14 2011 from
(10.10.210.11)

Last switchback time:   11:11:35 EST May 14 2011 from
(10.10.210.10)

Switchback mode:Immediate

MGCP Fallback mode: Not Selected

Last MGCP Fallback start time:  None

Last MGCP Fallback end time:None

MGCP Download Tones:Disabled

TFTP retry count to shut Ports: 2



Backhaul Link info:

Link Protocol:  TCP

Remote Port Number: 2428

Remote IP Address:  10.10.210.11

Current Link State: OPEN

Statistics:

Packets recvd:   3

Recv failures:   2

Packets xmitted: 1

Xmit failures:   0

PRI Ports being backhauled:

Slot 0, VIC 0, port 0

FAX mode: cisco

Configuration Error History:

BR1-RTR(config)#







ccm-manager switchback immediate

ccm-manager redundant-host 10.10.210.10

ccm-manager mgcp

!

mgcp

mgcp call-agent 10.10.210.11 service-type mgcp version 0.1

mgcp dtmf-relay voip codec all mode out-of-band

mgcp bind control source-interface Loopback0

mgcp bind media source-interface Loopback0

!



interface Serial0/0/0:23

no ip address

encapsulation hdlc

isdn switch-type primary-ni

isdn incoming-voice voice

isdn map address ^[2-9].. plan isdn type subscriber

isdn map address ^1[2-9]* plan isdn type national

isdn map address ^011* plan isdn type international

isdn bind-l3 ccm-manager

isdn bchan-number-order ascending

isdn outgoing display-ie

no cdp enable





CUCM...

Device InformationProduct Cisco MGCP T1 Port

Gateway BR1-RTR.proctorlabs.com

Device Protocol Digital Access PRI

Registration Unknown

IP Address Unknown

End-Point Name   S0/SU0/ds...@br1-rtr.proctorlabs.com



Best Regards,



Randall Crumm

Voice and Video Architect

Global Networking & Telecom









1007 Gibraltar Drive

Milpitas, CA  95035



Direct +1 408.576.7344

VoIP .100.7344





Creating value that increases

customer competitiveness




 
Legal Disclaimer:
The information contained in this message may be privileged and confidential. 
It is intended to be read only by the individual or entity to whom it is 
addressed or by their designee. If the reader of this message is not the 
intended recipient, you are on notice that any distribution of this message, in 
any form, is strictly prohibited. If you have received this message in error, 
please immediately notify the sender and delete or destroy any copy of this 
message

<><>___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] MGCP GW will not register in CM -- Unknown

[Randall Crumm]

HI The router is not functional

 

From: CCIE Voice [mailto:cc...@corb.net] 
Sent: Monday, May 16, 2011 3:28 PM
To: Randall Crumm
Cc: 
Subject: Re: [OSL | CCIE_Voice] MGCP GW will not register in CM -- Unknown

 

Your output indicates that the Gw is registered. Do you mean it is not 
functional?  That could be wrong router or port. 

--

 


On May 16, 2011, at 14:22, "Randall Crumm"  
wrote:

HI,

Having an issue in Call Manager. My br1 config looks good just can’t 
get it to register in call manager.

 

Any ideas? I’ve reloaded the router, deleted the GW and recreated it. 
No mgcp and mgcp. Etc…

 

Here are snipit of the config and CUCM page

 

BR1-RTR(config)#do show ccm

MGCP Domain Name: BR1-RTR.proctorlabs.com

PriorityStatus   Host



Primary Registered   10.10.210.11

First BackupBackup Ready 10.10.210.10

Second Backup   None

 

Current active Call Manager:10.10.210.11

Backhaul/Redundant link port:   2428

Failover Interval:  30 seconds

Keepalive Interval: 15 seconds

Last keepalive sent:11:48:05 EST May 14 2011 (elapsed time: 
00:00:07)

Last MGCP traffic time: 11:48:05 EST May 14 2011 (elapsed time: 
00:00:07)

Last failover time: 11:11:05 EST May 14 2011 from 
(10.10.210.11)

Last switchback time:   11:11:35 EST May 14 2011 from 
(10.10.210.10)

Switchback mode:Immediate

MGCP Fallback mode: Not Selected

Last MGCP Fallback start time:  None

Last MGCP Fallback end time:None

MGCP Download Tones:Disabled

TFTP retry count to shut Ports: 2

 

Backhaul Link info:

Link Protocol:  TCP

Remote Port Number: 2428

Remote IP Address:  10.10.210.11

Current Link State: OPEN

Statistics:

Packets recvd:   3

Recv failures:   2

Packets xmitted: 1

Xmit failures:   0

PRI Ports being backhauled:

Slot 0, VIC 0, port 0

FAX mode: cisco

Configuration Error History:

BR1-RTR(config)#

 

 

 

ccm-manager switchback immediate

ccm-manager redundant-host 10.10.210.10

ccm-manager mgcp

!

mgcp

mgcp call-agent 10.10.210.11 service-type mgcp version 0.1

mgcp dtmf-relay voip codec all mode out-of-band

mgcp bind control source-interface Loopback0

mgcp bind media source-interface Loopback0

!

 

interface Serial0/0/0:23

no ip address

encapsulation hdlc

isdn switch-type primary-ni

isdn incoming-voice voice

isdn map address ^[2-9].. plan isdn type subscriber

isdn map address ^1[2-9]* plan isdn type national

isdn map address ^011* plan isdn type international

isdn bind-l3 ccm-manager

isdn bchan-number-order ascending

isdn outgoing display-ie

no cdp enable

 

 

CUCM...

Device InformationProduct Cisco MGCP T1 Port 

Gateway BR1-RTR.proctorlabs.com 

Device Protocol Digital Access PRI 

Registration Unknown 

IP Address Unknown 

End-Point Name   S0/SU0/ds...@br1-rtr.proctorlabs.com

 

Best Regards,

 

    Randall Crumm

Voice and Video Architect 

Global Networking & Telecom



 



 

1007 Gibraltar Drive

Milpitas, CA  95035

 

Direct +1 408.576.7344

VoIP .100.7344

 

 

Creating value that increases

customer competitiveness

 

Legal Disclaimer: The information contained in this message may be 
privileged and confidential. It is intended to be read only by the individual 
or entity to whom it is addressed or by their designee. If the reader of this 
message is not the intended recipient, you are on notice that any distribution 
of this message, in any form, is strictly prohibited. If you have received this 
message in error, please immediately notify the sender and delete or destroy 
any copy of this message 

___
For more information regarding industry leading CCIE Lab training, 
please visit www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

___
For more information regarding industry leading CCI

[OSL | CCIE_Voice] Time of day routing

[Randall Crumm]

HI,

I am working on wb2 lab 1



It is asking to not allow intl calls during non-business hours. The
solution says to add time periods and a time schedule for the
appropriate time you wich. Then is says create another partition and a
new partition pt-tod.  The solution then says to create a translation
patter and add the pt-tod.





Here is my question. Can't I just add the pt-tod to the current route
pattern?



Best Regards,



Randall Crumm

Voice and Video Architect

Global Networking & Telecom









1007 Gibraltar Drive

Milpitas, CA  95035



Direct +1 408.576.7344

VoIP .100.7344





Creating value that increases

customer competitiveness




 
Legal Disclaimer:
The information contained in this message may be privileged and confidential. 
It is intended to be read only by the individual or entity to whom it is 
addressed or by their designee. If the reader of this message is not the 
intended recipient, you are on notice that any distribution of this message, in 
any form, is strictly prohibited. If you have received this message in error, 
please immediately notify the sender and delete or destroy any copy of this 
message

<><>___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] UC - Sip

[Randall Crumm]

HI,
I am working on Unity Connection SIP integration. When I call x5600 VM pilot, I 
get you call can't be completed.

I am having a conflict somewhere between the VM pilot, Hunt pilot and route 
pattern

I have the vm pilot and hunt pilot configured with the css none
I have the HP woth the none partition.

I cant configure my route pattern with the none partition.

I am using the none  partition for my phone dn's

Can someone shed some light for me this should be pretty straight forward...


Thanks,
Randall___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] logo on phone --RC

[Randall Crumm]

HI,
I am have created the list file and configured the thumbnail and full.png, 
restarted tftp services on both servers and reset the phones.

I can see the thumbnail, but I can't select it. I see the black dot on the 
default background and can't somehow move it to the ipexpertlogo.

And I have tried the green up/down button. even pushed button 2 since it is the 
second in the list

I am using a 7961 phone

Can someone let me know what to do?

Thanks,
Randall___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] UC - Sip

[Randall Crumm]

Thanks Sam,
The only way I was able to save it was to change the PT

Randall





From: Sam Park 
To: Randall Crumm 
Cc: "ccie_voice@onlinestudylist.com" 
Sent: Saturday, May 21, 2011 8:27 PM
Subject: Re: [OSL | CCIE_Voice] UC - Sip


RP to CUC SIP Trunk - like the other guy said.

A side note to keep in mind for the Dialplan;
The reason you can't add the RP in the  Partition is b/c the Hunt Pilot 
you created first already exists in .
HP, RP, TP, Device DNs, as wells as other features that are dialed; Call Park, 
Call Pickup Grps, etc, that reside in Partitions are all evaluated together.  
So two exact matches can not exist within any given partition.  
They can, however, exisit in different partitions.  If this is the case, and 
they are both in the same CSS, the tie breaker will be ordering within in the 
CSS.

Sam



On Sat, May 21, 2011 at 5:10 PM, Randall Crumm  wrote:

HI,
>I am working on Unity Connection SIP integration. When I call x5600 VM pilot, 
>I get you call can't be completed.
>
>
>I am having a conflict somewhere between the VM pilot, Hunt pilot and route 
>pattern
>
>
>I have the vm pilot and hunt pilot configured with the css none
>I have the HP woth the none partition.
>
>
>I cant configure my route pattern with the none partition.
>
>
>I am using the none  partition for my phone dn's
>
>
>Can someone shed some light for me this should be pretty straight forward...
>
>
>
>
>Thanks,
>Randall
>
>
>
>
>
>___
>For more information regarding industry leading CCIE Lab training, please 
>visit www.ipexpert.com
>
>Are you a CCNP or CCIE and looking for a job? Check out 
>www.PlatinumPlacement.com
>___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] SNR -- RC

[Randall Crumm]

HI,
Working on SNR
I have it configured just like the Proctor guide and when 1002 calls 5002 the 
mobile phone does not ring. Everything else works correctly.
I've had this issue before

my RD is 4087773434
RDP rerouting css is css-snr

CUCM services is compete match/10
RP= \+!/pt-snr\rl-hq

I don't see anything hitting the hq rtr in the q931 debug

Any ideas?

Thanks,
Randall___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] How to change the "Dialing display" --rc

[Randall Crumm]

HI I am working on WB 2 lab 7 question 2.4

How do I change the called number on the phone calling from an mgcp gw or h323 
gw?

I looked at PG and it said to change the display on the calling phone upi need 
to manipulate in the RP. I have added XX in the called party trasnform.

I and doing teho from hq to br1.
5002--calling 914158884343--hqgw(MGCP)--br1gw(H323)-local call this is working 
fine
5002 should display 4158884343 but it is displaying 8884343.

Any suggestions?
Thanks,
Randall
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] How to change the "Dialing display" --rc

[Randall Crumm]

This is also weird. Working on a dialing string hq-br2. RL-br2-hq always 
display 4087775002
It only worked correctly after I failed over.
Hq is mgcp and br2 is h323.

IDK.

Randall



From: adam compton 
To: Cristobal Priego 
Cc: Randall Crumm ; "ccie vo...@onlinestudylist.com" 

Sent: Sunday, May 22, 2011 5:09 PM
Subject: Re: [OSL | CCIE_Voice] How to change the "Dialing display" --rc


I was messing around with Called party transformations today on MGCP gateways 
and I noticed some different behavior than I thought would happen.  If I use 
Called Party Transformation for manipulating digits and RP for the display of 
the phone, the RP settings change the phone display while the phone is ringing, 
but not when the call is connected.  

Is that expected behavior?


On Sun, May 22, 2011 at 4:14 PM, Cristobal Priego  
wrote:

whenever you do digit manipulation at the Gateway level or the Route List (RG) 
level
>the digit manipulation that you do on the route pattern is only going to 
>affect the display on the phone
>
>on H323 gateway just make sure that you disable the supplementary-services 
>h225 cid-update
>
>and you should be ok
>
>
>2011/5/22 Randall Crumm 
>
>HI I am working on WB 2 lab 7 question 2.4
>>
>>
>>How do I change the called number on the phone calling from an mgcp gw or 
>>h323 gw?
>>
>>
>>I looked at PG and it said to change the display on the calling phone upi 
>>need to manipulate in the RP. I have added XX in the called party 
>>trasnform.
>>
>>
>>I and doing teho from hq to br1.
>>5002--calling 914158884343--hqgw(MGCP)--br1gw(H323)-local call this is 
>>working fine
>>5002 should display 4158884343 but it is displaying 8884343.
>>
>>
>>Any suggestions?
>>Thanks,
>>Randall
>>
>>___
>>For more information regarding industry leading CCIE Lab training, please 
>>visit www.ipexpert.com
>>
>>Are you a CCNP or CCIE and looking for a job? Check out 
>>www.PlatinumPlacement.com
>>
>
>___
>For more information regarding industry leading CCIE Lab training, please 
>visit www.ipexpert.com
>
>Are you a CCNP or CCIE and looking for a job? Check out 
>www.PlatinumPlacement.com
>___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Best way to put a branch in seat

[Randall Crumm]

Thanks I'll try that next time.



Randall









From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of John Anzar
Sent: Sunday, May 22, 2011 10:51 PM
To: rrcr...@yahoo.com; CCIE VOICE
Subject: Re: [OSL | CCIE_Voice] Best way to put a branch in seat



HI,

Normally im using loopback interface for the CUCM registration. i just
shut down if i want to test something. I'm not sure weather that's the
correct approach but its work for me :)

Best Regards

Anzar

> From: rrcr...@yahoo.com
> Date: Sun, 22 May 2011 20:18:27 -0700
> To: ccie_voice@onlinestudylist.com
> Subject: [OSL | CCIE_Voice] Best way to put a branch in seat
>
> Hi
> Just wondering what people think works best to put a branch rtr (h323
or mgcp)
>
> Mgcp seems simpliest to just do "no mgcp"
>
> H323 - not sure. What do people think?
>
> 1. Put in different ccm group (one server) and stop ccm services
>
> 2 shut down PRI
>
> 3. Shut down physical interface
>
>
> Any other suggestions?
>
> Thanks
> Randall
>
>
> Sent from my iPhone
> ___
> For more information regarding industry leading CCIE Lab training,
please visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com


 
Legal Disclaimer:
The information contained in this message may be privileged and confidential. 
It is intended to be read only by the individual or entity to whom it is 
addressed or by their designee. If the reader of this message is not the 
intended recipient, you are on notice that any distribution of this message, in 
any form, is strictly prohibited. If you have received this message in error, 
please immediately notify the sender and delete or destroy any copy of this 
message

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] calculation of mips for voice termination

[Randall Crumm]

The 3x15 is for the 3 channels for the PRI



Randall





From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Brian
Mulgrew
Sent: Tuesday, May 24, 2011 2:20 AM
To: George Goglidze
Cc: OSL
Subject: Re: [OSL | CCIE_Voice] calculation of mips for voice
termination



Thanks George!

On Mon, May 23, 2011 at 11:21 PM, George Goglidze 
wrote:

Hi Brian,

I'm with you on this one, I think you should consider worst case
scenario, and if you have TEHO calls there could potentially be 3 g729
calls... so 40 MIPS...

On Mon, May 23, 2011 at 2:08 PM, Brian Mulgrew 
wrote:

Hi - Going though some of the DSGs when calculating MIPs for
voice termination the calculation is often given as 15MIPS per call for
G711 would we not calculate a worst case scenario of 40MIPs (G729r8) per
call?



e.g. if using TEHO over a G729 region, device mobility etc.



This in turn could have an impact when being asked to exhaust
remaining DSPs for xcoder (e.g. Vol2 Lab2 Q5.1) - I thought we would
have 9 xcoder sessions based on:



2 x DSPs = 480MIPs - (3 x 40) 120MIPS (for G729r8 voice
termination) = 360MIPs (9 sessions for G729r8 xcoder).



But the DSG calculates 12 xcoder sessions based on:



2 x DSPs= 480MIPS - (3 x 15) 45MIPS (for voice termination) =
435MIPs (14 session for G729ar8)



Or am I being a bit thick?



Thanks

Brian





___
For more information regarding industry leading CCIE Lab
training, please visit www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com






 
Legal Disclaimer:
The information contained in this message may be privileged and confidential. 
It is intended to be read only by the individual or entity to whom it is 
addressed or by their designee. If the reader of this message is not the 
intended recipient, you are on notice that any distribution of this message, in 
any form, is strictly prohibited. If you have received this message in error, 
please immediately notify the sender and delete or destroy any copy of this 
message

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Help

[Randall Crumm]

HI,

I had an issue when our HQ moved. The PRI's were sourced from another
switch on the carrier's side so we had to review the settings. The
problem I had was I had to do isdn map address for international calls
and map them to natl calls.







The bottom line here is you need to review everything if getting new
service with any telco.



Randall





From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Bill Lake
Sent: Friday, May 27, 2011 6:06 AM
To: Inder Google
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Help



Right, Vik always seems to hit the mark, I had found this very document
too but doubted myself too much.



It is amazing that the carrier could not match the settings on their old
T1 with the new one.  This was just supposed to be a move from 10 b
channels to 23 b channels but everything went wrong.  They went from 4
digits to 10, they said it was 23 channels when they sent 12, then
insisted I was wrong.  They changed the incoming caller ID method, the
delivered 11 channels as metro only so since this was an overlay space
with 2 area codes and we were doing decending channel selection, local
calls wanted the customer to dial 1 to complete.  So clearly they did
not deliver the same data/voice PRI as they had previously but they
continue to say they did and it is our fault.



Again thanks to everyone who helped on this.



On Thu, May 26, 2011 at 10:35 PM, Inder Google 
wrote:

Hey Bill,

Vik's hit it on the head.  Here is a link that explains the issue,
albeit it
is a bit out dated.

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note0
9186
a0080569b65.shtml


The link also indicates that, in some instances, you will have to take
things further.  You may have to play around with the regions so that
calls
from video enabled phones are forced to "none" for video bandwidth when
placing calls via the H323 gateway.


Message: 1
Date: Thu, 26 May 2011 13:12:27 -0700
From: Vik Malhi 
To: Bill Lake ,   OSL Group
   
Subject: Re: [OSL | CCIE_Voice] Help
Message-ID: mailto:ca0401a2.11931%25vma...@ipexpert.com> >
Content-Type: text/plain;   charset="ISO-8859-1"

If this has been resolved- apologies for the redundant info.

The bearer capability for the failed call is different.

   Bearer Capability i = 0x8890
   Standard = CCITT
   Transfer Capability = Unrestricted Digital


0x8890 is 64k data call.


Try this command:

SJC-RTR(config)#voice-port 0/0/0:23
SJC-RTR(config-voiceport)#bearer-cap speech



--
Vik Malhi ? CCIE #13890
Managing Partner / Instructor - IPexpert, Inc.
Mailto: vma...@ipexpert.com
Telephone: +1.810.326.1444 ext 420 
Fax: +1.810.454.0130 
Live Assistance, Please visit: www.ipexpert.com/chat


IPexpert is a premier provider of Self-Study Workbooks, Video on Demand,
Audio Tools, Online Hardware Rental and Classroom Training for the Cisco
CCIE (R&S, Voice, Wireless, Security & Service Provider)
certification(s)
with training locations throughout the United States, Europe, South Asia
and Australia. Be sure to visit our online communities at
www.ipexpert.com/communities   and
our public website at www.ipexpert.com 




On 5/25/11 5:35 PM, "Bill Lake"  wrote:

>Hello Everyone,
>
>I ran into a real world issue that I am having trouble with.  We
>upgraded a 10 b channel PRI to a new PRI that has 23 b channels and
>afterwards some of the IP phones can not make outbound calls.  These
>phones all have a shared main line and 3 of phones cannot make
>outbound calls on that line while all the others can.  I have changed
>the numbers and minimized the names to protect the innocent but has
>anyone seen anything like this.  The dial peer is matched the same and
>below is the debug isdn q931 and as you can see, to calls go through
>fine but one of the phones with the issue has the error Cause i =
>0x83A9 - Temporary failure
>
>It does not make sense since the dial peer match is the same and as
>you can see below it gets sent to the ISDN circuit but then
>disconnects.  Another odd thing is one phone fast busy's once and
>disconnects while the other just get fast busy. This is a local h323
>gateway configured on the CUCM but no gatekeeper or anything else that
>I am aware of.  All phones are 7962.  Any help would be greatly
>appriciated.
>
>*May 25 2011 16:47:45.363 CDT: ISDN Se0/0/1:23 Q931:
>pak_private_number: Invalid type/plan 0x0 0x0 may be overriden;
>sw-type 13
>*May 25 2011 16:47:45.363 CDT: ISDN Se0/0/1:23 Q931:
>pak_private_number: Invalid type/plan 0x0 0x0 may be overriden;
>sw-type 13
>*May 25 2011 16:47:45.363 CDT: ISDN Se0/0/1:23 Q931: Sending SETUP
>callref = 0x00B1 callID = 0x8032 switch = primary-ni interface = User
>*May 25 2011 16:47:45.367 CDT: ISDN Se0/0/

[OSL | CCIE_Voice] CUCM CLI Commands

[Randall Crumm]

Hi,
Is there a or which reference guide somewhere on Cisco's site that has the 
commands for the CLI on CUCM?

Thanks,
Randall___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Possible issue with opening PDF's today ?

[Randall Crumm]

I was told to redownload again.

I did and it is working.

Randall




From: adam compton 
To: Leslie Meade 
Cc: ccie_voice@onlinestudylist.com
Sent: Saturday, May 28, 2011 12:49 PM
Subject: Re: [OSL | CCIE_Voice] Possible issue with opening PDF's today ?


Same here.  Shouldn't have to worry about BS like that.  Thanks IPexpert for 
only allowing to see docs when your computer is connected to the internet.  And 
you don't print more than once.  And you use a password everytime you open it.  
When you pay 600$ for a book, you should be able to read it.

Adam Compton
com...@gmail.com


On Sat, May 28, 2011 at 11:58 AM, Leslie Meade  wrote:

Is it me or we experiencing issues opening the secure PDF's today.
>I have tried multiple machines and I am getting a blank document. ( I have 
>open file installed). The PDF's open just fine last night. Infact I had one 
>open up on another machine and closed to make sure.
> 
> 
> 
>___
>For more information regarding industry leading CCIE Lab training, please 
>visit www.ipexpert.com
>
>Are you a CCNP or CCIE and looking for a job? Check out 
>www.PlatinumPlacement.com
>

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] Weird error message when calling

[Randall Crumm]

HI,
Has anyone seen this error: This was from an OB call attempt.

I can't call IB or OB

HQ-RTR#
May 29 01:18:33.768: ISDN Se0/0/0:23 **ERROR**: CCPCC_CallOrigination: SETUP 
timed-out (2nd T303) to NETWORK.  The SETUP failed.


my hq rtr is h323

Randall___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Score report...

[Randall Crumm]

I heard next business day

So you should have heard Wednesday barring a holiday.

I'd contact the proctor.



Randall




From: Cristobal Priego 
To: de...@wp.pl
Cc: ccie_voice 
Sent: Saturday, May 28, 2011 3:24 PM
Subject: Re: [OSL | CCIE_Voice] Score report...


or less


2011/5/28 Cristobal Priego 

usually 48 hours
>
>
>
>2011/5/28 hmmm 
>
>Hi,
>>I was CCIE Voice lab In Brussels on Tuesday now is Saturday and I haven't 
>>score report and information about score.
>>How long You wait for score report ?
>>
>>
>>reg
>>hub
>>
>>
>>___
>>For more information regarding industry leading CCIE Lab training, please 
>>visit www.ipexpert.com
>>
>>Are you a CCNP or CCIE and looking for a job? Check out 
>>www.PlatinumPlacement.com
>>
>

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] UCME/CUE

[Randall Crumm]

HI,
I'm having a weird issue. (see snipits below)

I configured mt CME for CUE(not telephony-service yet) and I cannot ser ser 0/0 
ses to it
I can ping 10.10.202.2 from hq rtr
The cli just has a blank like

Anyone have an ideas or run into this?

Thanks,
Randall


interface Service-Engine0/0
 ip unnumbered Vlan400
 service-module ip address 10.10.202.2 255.255.255.0
 service-module ip default-gateway 10.10.202.1

ip route 10.10.202.2 255.255.255.255 Service-Engine0/0


interface Vlan400
 ip address 10.10.202.1 255.255.255.0___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] UCME/CUE

[Randall Crumm]

BR2-RTR#ser ser 0/0 status
Service Module is Cisco Service-Engine0/0
Service Module supports session via TTY line 194
Service Module is in Steady state
Service Module heartbeat-reset is enabled
Getting status from the Service Module, please wait..

May 30 02:47:31.618: %IPPHONE-6-REG_ALARM: 24: Name=SEP001BD4C6C02D 
Load=8.0(5.0) Last=Phone-Reg-Rej
Cisco Unity Express 7.0.1
CUE Running on AIM


Looks good...



From: Nirvair Sahota 
To: Online Study ; Randall Crumm 

Sent: Sunday, May 29, 2011 3:28 PM
Subject: Re: [OSL | CCIE_Voice] UCME/CUE


verify module status "ser ser 0/0 status"  and if any issues you may try to 
reset  this module by using, " ser ser 0/0 reset' cmd.

--- On Sun, 5/29/11, Randall Crumm  wrote:


>From: Randall Crumm 
>Subject: [OSL | CCIE_Voice] UCME/CUE
>To: "Online Study" 
>Date: Sunday, May 29, 2011, 2:07 PM
>
>
>HI,
>I'm having a weird issue. (see snipits below)
>
>
>I configured mt CME for CUE(not telephony-service yet) and I cannot ser ser 
>0/0 ses to it
>I can ping 10.10.202.2 from hq rtr
>The cli just has a blank like
>
>
>Anyone have an ideas or run into this?
>
>
>Thanks,
>Randall
>
>
>
>
>interface Service-Engine0/0
> ip unnumbered Vlan400
> service-module ip address 10.10.202.2 255.255.255.0
> service-module ip default-gateway 10.10.202.1
>
>
>ip route 10.10.202.2 255.255.255.255 Service-Engine0/0
>
>
>
>
>interface Vlan400
> ip address 10.10.202.1 255.255.255.0
>
>
>
>
>-Inline Attachment Follows-
>
>
>___
>For more information regarding industry leading CCIE Lab training, please 
>visit www.ipexpert.com
>
>Are you a CCNP or CCIE and looking for a job? Check out 
>www.PlatinumPlacement.com ___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] UCME/CUE

[Randall Crumm]

It looks like CUE is on line 194, but I can't clear it.

BR2-RTR#ser ser 0/0 status
Service Module is Cisco Service-Engine0/0
Service Module supports session via TTY line 194
Service Module is in Steady state
Service Module heartbeat-reset is enabled
Getting status from the Service Module, please wait..

May 30 02:47:31.618: %IPPHONE-6-REG_ALARM: 24: Name=SEP001BD4C6C02D 
Load=8.0(5.0) Last=Phone-Reg-Rej
Cisco Unity Express 7.0.1
CUE Running on AIM

BR2-RTR#
BR2-RTR#
May 30 02:47:51.967: %IPPHONE-6-REG_ALARM: 24: Name=SEP0011BBEF76A9 
Load=8.0(5.0) Last=Phone-Reg-Rej
BR2-RTR#clear line 194
[confirm]
 [OK]
BR2-RTR#show line
   Tty Line Typ     Tx/Rx    A Modem  Roty AccO AccI  Uses  Noise Overruns  Int
*     0    0 CTY              -    -      -    -    -    11      1    0/0      -
      1    1 AUX   9600/9600  -    -      -    -    -     0      0    0/0      -
    194  194 TTY   9600/9600  -    -      -    -    -    11      0    0/0      -
    514  514 VTY              -    -      -    -    -     0      0    0/0      -
    515  515 VTY              -    -      -    -    -     0      0    0/0      -
    516  516 VTY              -    -      -    -    -     0      0    0/0      -
    517  517 VTY              -    -      -    -    -     0      0    0/0      -
    518  518 VTY              -    -      -    -    -     0      0    0/0      -
    519  519 VTY              -    -      -    -    -     0      0    0/0      -
    520  520 VTY              -    -      -    -    -     0      0    0/0      -
    521  521 VTY              -    -      -    -    -     0      0    0/0      -
    522  522 VTY              -    -      -    -    -     0      0    0/0      -
    523  523 VTY              -    -      -    -    -     0      0    0/0      -
    524  524 VTY              -    -      -    -    -     0      0    0/0      -
    525  525 VTY              -    -      -    -    -     0      0    0/0      -
    526  526 VTY              -    -      -    -    -     0      0    0/0      -
    527  527 VTY              -    -      -    -    -     0      0    0/0      -
    528  528 VTY              -    -      -    -    -     0      0    0/0      -
    529  529 VTY              -    -      -    -    -     0      0    0/0      -

Line(s) not in async mode -or- with no hardware support:
2-193, 195-513

BR2-RTR#

Any other ideas...

Thanks,
Randall





From: Nirvair Sahota 
To: Online Study ; Randall Crumm 

Sent: Sunday, May 29, 2011 3:28 PM
Subject: Re: [OSL | CCIE_Voice] UCME/CUE


verify module status "ser ser 0/0 status"  and if any issues you may try to 
reset  this module by using, " ser ser 0/0 reset' cmd.

--- On Sun, 5/29/11, Randall Crumm  wrote:


>From: Randall Crumm 
>Subject: [OSL | CCIE_Voice] UCME/CUE
>To: "Online Study" 
>Date: Sunday, May 29, 2011, 2:07 PM
>
>
>HI,
>I'm having a weird issue. (see snipits below)
>
>
>I configured mt CME for CUE(not telephony-service yet) and I cannot ser ser 
>0/0 ses to it
>I can ping 10.10.202.2 from hq rtr
>The cli just has a blank like
>
>
>Anyone have an ideas or run into this?
>
>
>Thanks,
>Randall
>
>
>
>
>interface Service-Engine0/0
> ip unnumbered Vlan400
> service-module ip address 10.10.202.2 255.255.255.0
> service-module ip default-gateway 10.10.202.1
>
>
>ip route 10.10.202.2 255.255.255.255 Service-Engine0/0
>
>
>
>
>interface Vlan400
> ip address 10.10.202.1 255.255.255.0
>
>
>
>
>-Inline Attachment Follows-
>
>
>___
>For more information regarding industry leading CCIE Lab training, please 
>visit www.ipexpert.com
>
>Are you a CCNP or CCIE and looking for a job? Check out 
>www.PlatinumPlacement.com ___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] SRST mode auto-provision

[Randall Crumm]

HI,
Just wondering if it should make a difference if I am running a HW VPN because 
my phones will not register in SRST mode.
I tried several ways to put br1 rtr in srst no luck.


I've even manually configured the rtr with ephones and ephone-dn's

Everything looks configured correctly on CUCM too.



snipit..

telephony-service
 srst mode auto-provision all
 max-ephones 3
 max-dn 3
 ip source-address 10.10.110.2 port 2000

Thanks,
Randall___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] SRST mode auto-provision

[Randall Crumm]

yes.
I'm going to try tomorrow

I just need to know the bestway to do this in the lab.

Randall






From: Cristobal Priego 
To: Rrcrumm 
Cc: Online Study 
Sent: Sunday, May 29, 2011 6:23 PM
Subject: Re: [OSL | CCIE_Voice] SRST mode auto-provision


on your phone check the network settings do they have an SRST reference ?


2011/5/29 Rrcrumm 

I did the latter but with the sub and it did not work
>
>
>Randall
>
>Sent from my iPhone
>
>On May 29, 2011, at 6:16 PM, Cristobal Priego  
>wrote:
>
>
>you will have to implemente access list for SRST to work properly
>>or create a new ccm-group with the pub server only
>>assign the ccm-group to the proper device pool
>>and when you're ready to test srst
>>just stop the ccm service on the pub
>>
>>
>>2011/5/29 Randall Crumm 
>>
>>HI,
>>>Just wondering if it should make a difference if I am running a HW VPN 
>>>because my phones will not register in SRST mode.
>>>I tried several ways to put br1 rtr in srst no luck.
>>>
>>>
>>>
>>>I've even manually configured the rtr with ephones and ephone-dn's
>>>
>>>
>>>Everything looks configured correctly on CUCM too.
>>>
>>>
>>>
>>>
>>>
>>>
>>>snipit..
>>>
>>>
>>>telephony-service
>>> srst mode auto-provision all
>>> max-ephones 3
>>> max-dn 3
>>> ip source-address 10.10.110.2 port 2000
>>>
>>>
>>>Thanks,
>>>Randall
>>>
>>>
>>>
>>>
>>>
>>>___
>>>For more information regarding industry leading CCIE Lab training, please 
>>>visit www.ipexpert.com
>>>
>>>Are you a CCNP or CCIE and looking for a job? Check out 
>>>www.PlatinumPlacement.com
>>>
>>___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] Gatekeeper question

[Randall Crumm]

Hi,
How do I get gk-trunk_1 and 2  to repflect port 1720?

Thanks,
Randall

HQ-RTR(config)#do show gatekeeper gw
GATEWAY TYPE PREFIX TABLE
=
Prefix: 3*
  Zone HQ master gateway list:
    10.10.110.3:1720 BR2-RTR

Prefix: 1#*
  Zone HQ master gateway list:
    10.10.210.10:40081 GK-TRUNK_1
    10.10.210.11:33277 GK-TRUNK_2
  Zone HQ prefix 1... priority gateway list(s):
   Priority 5:
    10.10.210.10:40081 GK-TRUNK_1
    10.10.210.11:33277 GK-TRUNK_2
  Zone HQ prefix 5... priority gateway list(s):
   Priority 5:
    10.10.210.10:40081 GK-TRUNK_1
    10.10.210.11:33277 GK-TRUNK_2___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Gatekeeper question--RC

[Randall Crumm]

Thanks for all the answers.

I did search the services for 1720 and entered gk-trunk.

I'm working on WB2 lab 2 and the output from the PG shows port 1720 and my 
output shows 40081 and 33277 respectively below.

The questions in the WB has output and says the port should show 1720 no 40081 
and 33277. This is what I am trying to do. The PG did not specify anything 
specific as well.

Should I not worry about this?

Randall






From: Roger Carpio 
To: Randall Crumm 
Cc: Online Study 
Sent: Monday, May 30, 2011 12:07 PM
Subject: Re: [OSL | CCIE_Voice] Gatekeeper question


CCM service "Device Name of GK-controlled Trunk That Will Use Port 1720"; just 
type the trunk name.

Rgs,
Roger Carpio.


On Mon, May 30, 2011 at 11:39 AM, Randall Crumm  wrote:

Hi,
>How do I get gk-trunk_1 and 2  to repflect port 1720?
>
>
>Thanks,
>Randall
>
>
>HQ-RTR(config)#do show gatekeeper gw
>GATEWAY TYPE PREFIX TABLE
>=
>Prefix: 3*
>  Zone HQ master gateway list:
>    10.10.110.3:1720 BR2-RTR
>
>
>Prefix: 1#*
>  Zone HQ master gateway list:
>    10.10.210.10:40081 GK-TRUNK_1
>    10.10.210.11:33277 GK-TRUNK_2
>  Zone HQ prefix 1... priority gateway list(s):
>   Priority 5:
>    10.10.210.10:40081 GK-TRUNK_1
>    10.10.210.11:33277 GK-TRUNK_2
>  Zone HQ prefix 5... priority gateway list(s):
>   Priority 5:
>    10.10.210.10:40081 GK-TRUNK_1
>    10.10.210.11:33277 GK-TRUNK_2
>
>
>
>
>___
>For more information regarding industry leading CCIE Lab training, please 
>visit www.ipexpert.com
>
>Are you a CCNP or CCIE and looking for a job? Check out 
>www.PlatinumPlacement.com
>___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] CUE/CME

[Randall Crumm]

HI,
Here is a dumb question, but causing me issues.

My cue is stable and I can log in to the web page with the user from the cue 
cli.

Now when I start the initialization wizard I keep getting "login to CME as 
administrator failed. check CME config."

Am I suppose to use the user under tele-service? In my case admin/c1sc0123?

snip-its

ip http server
ip http authentication local
no ip http secure-server
ip http path flash:/GUI


telephony-service
 max-ephones 7
 max-dn 7
 ip source-address 10.10.110.3 port 2000
 voicemail 3600
 max-conferences 8 gain -6
 call-forward pattern .T
 web admin system name admin password c1sc0123
 dn-webedit
 transfer-system full-consult
 transfer-pattern .
 transfer-pattern .T
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Gatekeeper question--RC

[Randall Crumm]

Hi Roger,
I thought of restarting the cm service, that didn't work. I reset the trunk 
(did not work), then shut/no shut the GK and it worked.

THANKS!!! 

Randall



From: Roger Carpio 
To: Randall Crumm 
Cc: Online Study 
Sent: Monday, May 30, 2011 1:08 PM
Subject: Re: [OSL | CCIE_Voice] Gatekeeper question--RC


That should do it. If they do not show the requested port after adding the 
trunk name to the service parameter I would try resetting the trunk; resetting 
CCM service, gatekeeper shut/no shut etc.

Rgs,
Roger Carpio.


On Mon, May 30, 2011 at 1:36 PM, Randall Crumm  wrote:


>
>Thanks for all the answers.
>
>
>I did search the services for 1720 and entered gk-trunk.
>
>
>I'm working on WB2 lab 2 and the output from the PG shows port 1720 and my 
>output shows 40081 and 33277 respectively below.
>
>
>The questions in the WB has output and says the port should show 1720 no 40081 
>and 33277. This is what I am trying to do. The PG did not specify anything 
>specific as well.
>
>
>Should I not worry about this?
>
>
>Randall
>
>
>
>
>
>
>
>
>
>
>From: Roger Carpio 
>To: Randall Crumm 
>Cc: Online Study 
>Sent: Monday, May 30, 2011 12:07 PM
>Subject: Re: [OSL | CCIE_Voice] Gatekeeper question
>
>
>CCM service "Device Name of GK-controlled Trunk That Will Use Port 1720"; just 
>type the trunk name.
>
>Rgs,
>Roger Carpio.
>
>
>On Mon, May 30, 2011 at 11:39 AM, Randall Crumm  wrote:
>
>Hi,
>>How do I get gk-trunk_1 and 2  to repflect port 1720?
>>
>>
>>Thanks,
>>Randall
>>
>>
>>HQ-RTR(config)#do show gatekeeper gw
>>GATEWAY TYPE PREFIX TABLE
>>=
>>Prefix: 3*
>>  Zone HQ master gateway list:
>>    10.10.110.3:1720 BR2-RTR
>>
>>
>>Prefix: 1#*
>>  Zone HQ master gateway list:
>>    10.10.210.10:40081 GK-TRUNK_1
>>    10.10.210.11:33277 GK-TRUNK_2
>>  Zone HQ prefix 1... priority gateway list(s):
>>   Priority 5:
>>    10.10.210.10:40081 GK-TRUNK_1
>>    10.10.210.11:33277 GK-TRUNK_2
>>  Zone HQ prefix 5... priority gateway list(s):
>>   Priority 5:
>>    10.10.210.10:40081 GK-TRUNK_1
>>    10.10.210.11:33277 GK-TRUNK_2
>>
>>
>>
>>
>>___
>>For more information regarding industry leading CCIE Lab training, please 
>>visit www.ipexpert.com
>>
>>Are you a CCNP or CCIE and looking for a job? Check out 
>>www.PlatinumPlacement.com
>>
>
>
>___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] ISDN bchan selection

[Randall Crumm]

Just to make sure top down mean channel 23 to 1
do I would configure isdn bchan descending

Thanks,
randall___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] ISDN bchan selection

[Randall Crumm]

Thanks!!!





From: Steve Denney (stdenney) 
To: Bill Lake 
Cc: Cristobal Priego ; Randall Crumm 
; Online Study 
Sent: Wednesday, June 1, 2011 2:18 PM
Subject: RE: [OSL | CCIE_Voice] ISDN bchan selection


Whoops. I was doing fine up until that last cut and paste error. :)
 
Bill’s absolutely correct; that last line should have read
“Top down” = *ascending* = channel 1 to 23.
 
cheers, sd
 
From:Bill Lake [mailto:whl...@gmail.com] 
Sent: Wednesday, June 01, 2011 4:34 PM
To: Steve Denney (stdenney)
Cc: Cristobal Priego; Randall Crumm; Online Study
Subject: Re: [OSL | CCIE_Voice] ISDN bchan selection
 
ascending is 1-23, just did this at a customer so I know that is right and 
confirmed with show isdn q931
descending is 23-1 as is the default.
 
On Wed, Jun 1, 2011 at 1:54 PM, Steve Denney (stdenney)  
wrote:
It helps me to visualize a ladder, with the rungs being the channels, and rung 
(channel) number 1 being at the top. 
 
“Ascending” and “descending” refer to *numerically* ascending or descending – 
so “ascending” numerically (from channel 1 to channel N) means going “top down” 
on the ladder.
Likewise, “descending” numerically (the default; from channel N down to channel 
1) means going “bottom up” on the ladder.
 
So Randall, your statement is incorrect. “Top down” = descending = channel 1 to 
23.
 
Just my little mnemonic. YMMV :)
 
cheers, sd
 
From:ccie_voice-boun...@onlinestudylist.com 
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Cristobal Priego
Sent: Wednesday, June 01, 2011 1:38 PM
To: Randall Crumm
Cc: Online Study
Subject: Re: [OSL | CCIE_Voice] ISDN bchan selection
 
You can configure the router to select the first available B channel in 
ascending order (channel B1) or descending order (channel B23 ).  By default, 
the router will select outgoing calls in descending order.
2011/6/1 Randall Crumm 
Just to make sure top down mean channel 23 to 1
do I would configure isdn bchan descending
 
Thanks,
randall
 
 

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com
 

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] NTP on the lab

[Randall Crumm]

I haven't taken the lab yet but I would agree and only think the proctor can 
help if you are having a HW issue, informix Database issue or something like 
that

rc 



From: adam compton 
To: "" 
Sent: Wednesday, June 1, 2011 6:43 PM
Subject: Re: [OSL | CCIE_Voice] NTP on the lab





On Wed, Jun 1, 2011 at 9:43 PM, adam compton  wrote:

I had bad luck asking the proctor last time around.  I told them I interpret 
wording that SCCP is used for registration and he just blew me off with 
"whatever it says".  i watch ipexpert and they say ask the proctor ask the 
proctor.  Unless it's a typo, I don't think you are getting any help from the 
proctor in understanding a question.  At least in RTP
>
>
>
>On Wed, Jun 1, 2011 at 9:40 PM, Adil Shaikh  wrote:
>
>did 'show ntp status' showed synchronization?
>> 
>>regarding summertime, i think it would be worth asking proctor. 
>> 
>>-adil
>>
>>
>>On Thu, Jun 2, 2011 at 10:32 AM, adam compton  wrote:
>>
>>When I took the test last time I used the clock timezone command and the ntp 
>>server command to setup ntp.  I did not get points for this question.
>>>
>>>If the question on the Lab doesn't say anything about "clock summertime", 
>>>should we throw the command in anyway on the routers?  I know clock 
>>>summertime without any options uses US daylight savings time dates, but not 
>>>sure if those would apply to other timezones as well.  As best I can tell, 
>>>I've heard of Hong Kong and UK and US as sites.
>>>
>>>Regards,
>>>Adam Compton
>>>
>>>___
>>>For more information regarding industry leading CCIE Lab training, please 
>>>visit www.ipexpert.com
>>>
>>>Are you a CCNP or CCIE and looking for a job? Check out 
>>>www.PlatinumPlacement.com
>>>
>>
>>
>>-- 
>>
>>  .    . . .
>>_7___|___|_|_|adil.sha...@gmail.com 
>> 
>>    . .
>> 
>>
>

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] CME diap-peer question

[Randall Crumm]

HI,
I have a question.
Say I have a CME and have a dial-peer for intl calls that goies out local GW
I also need two dial-peers(1 backupo) to route calls through Gatekeeper@HQ, 1st 
choice, or through the branch 1 gw as a backup.

I get calls to work through the GK but when it is down my calls go through 
dial-peer 1 instead of dial-peer 3

My question is how is how do make sure the call goes though dial-peer 3 and not 
dial-peer 1 


(leaving some info out)

dial-peer voice 1 pots - local gw
dest-pattern 900T
prefix 00
port0/0/0:15

dial-peer voice 2 voip
dest-patt9001212T
session target ras

dial-peer voice 3 voip
dest-pattern 9001212T
session target br1
pref 1


thanks
randall
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] CUE ip unnumbered

[Randall Crumm]

I was looking at it from the perspective you could not change the SM



Randall









From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of adam
compton
Sent: Thursday, June 02, 2011 7:28 AM
To: Rrcrumm
Cc: 
Subject: Re: [OSL | CCIE_Voice] CUE ip unnumbered



Sam was correct.  I had to use /31 mask.  /32 was invalid mask and /30
overlapped with another interface.

On Thu, Jun 2, 2011 at 10:24 AM, Rrcrumm  wrote:

So did you just specify the ip address and your mask was /32? Just
asking because the post before has /31

Randall

Sent from my iPhone


On Jun 1, 2011, at 6:23 PM, adam compton  wrote:

> I've got a weird requirement for configuring a CUE module.  Normally
you use "ip unnumber "interface", configure IP and your done.  I have a
loopback at 10.10.240.1 255.255.255.255 mask.  I need to configure the
CUE ip address as 10.10.240.2.  Is it possible to configure this without
changing the subnet mask of the loopback interface?
>
> Regards,
> Adam Compton

> ___
> For more information regarding industry leading CCIE Lab training,
please visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com




 
Legal Disclaimer:
The information contained in this message may be privileged and confidential. 
It is intended to be read only by the individual or entity to whom it is 
addressed or by their designee. If the reader of this message is not the 
intended recipient, you are on notice that any distribution of this message, in 
any form, is strictly prohibited. If you have received this message in error, 
please immediately notify the sender and delete or destroy any copy of this 
message

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] is it slow or just me

[Randall Crumm]

I'm dropping connections and it is very slow___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] IPPM not showing presence

[Randall Crumm]

HI,
My CUPC  user cannot see the presence of by ip phone. It is showing offline, 
but I have set the phone status as available.

Any ideas...

Thanks,
Randall___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] IPPM not showing presence

[Randall Crumm]

Thanks Earl.
I'll try it.



From: "Hough, Earl" 
To: Randall Crumm ; Online Study 

Sent: Saturday, June 4, 2011 1:25 PM
Subject: RE: [OSL | CCIE_Voice] IPPM not showing presence


If you’re 100% sure the configuration of all the elements is correct, sometimes 
a complete restart of the CUPS server is required before this works.  For me it 
was hit or miss as to whether I needed to restart the entire server, or just 
the Presence Engine component.  But, if I ever had a problem seeing the status 
when I knew the configuration was correct, a reboot of the box fixed it.  Of 
course, I had to wait the 10-15 minutes before the server was fully up and 
running once again. J
 
Earl Hough
CCIE #16508 (R&S/Security/Voice)
 
From:ccie_voice-boun...@onlinestudylist.com 
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Randall Crumm
Sent: Friday, June 03, 2011 11:37 PM
To: Online Study
Subject: [OSL | CCIE_Voice] IPPM not showing presence
 
HI,
My CUPC  user cannot see the presence of by ip phone. It is showing offline, 
but I have set the phone status as available.
 
Any ideas...
 
Thanks,
Randall
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ The 
information contained in this transmission is confidential. It is
intended solely for the use of the individual(s) or organization(s) to
whom it is addressed. Any disclosure, copying or further distribution is
not permitted unless such privilege is explicitly granted in writing by
PC Mall, Inc. Furthermore, PC Mall, Inc. is not responsible for
the proper and complete transmission of the substance of this
communication, nor for any delay in its receipt. ___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] AAR and VM

[Randall Crumm]

HI,
I'm playing with mgcp gw and cuc and AAR. I have some issues every other time. 

when I call from pstn to br1 ph2 call goes to vm as expected.

When I lower the locations cac I need the call rerouted to vm. I am getting a 
busy signal.

I assigned the aar groups and css's


can someone explain the way the call get routed and what should I add as a mask 
on the hunt pilot and what RP should I use?

my phone mask is 617863 (1002)
vm pilot is 5600 (212394)

Thanks,
Randall___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] called number display ( TO:...) on MGCP GW

[Randall Crumm]

To change the phone display use the transforms of the route pattern. To change 
what is sent to the PSTN change the RL.

HTH

Randall


From: cisco cisco 
To: ccie_voice@onlinestudylist.com
Sent: Saturday, June 4, 2011 2:04 PM
Subject: [OSL | CCIE_Voice] called number display ( TO:...) on MGCP GW


Hi Experts,

I need to make it appear on the calling phone on a CUCM  something different 
than the digits actually going through an MGCP gateway.

Let's say for example I want to call PSTN phone 912123942123 ,making appear 
12123942123 on my phone while the digits 3942123 go through the gateway.

As far as I had understood the place to do this was the digit manipulation on 
the Route Pattern with something like predot with RP 9.1212392123 , while 
actually manipulating the transmitted digits on RL or called party 
transformation pattern.

But I got these two issues:

-If I change the connected line presentation on the RP from default to allowed 
, the RP manipulation is ignored and I don't get on the phone what needed.

-If I route the call passing through a Translation Pattern and then the RP ( 
for example globalizing to +12123942123 with TP and then manipulating the TO: 
on the RP) , again RP manipulation ignored.
What it's strange it's that if on the TP I don't prefix a + but any other digit 
and change the patterns accordingly all works

Any idea ? Any known bug for that ?

Thanks for any help.

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] AAR and VM

[Randall Crumm]

I worked this out. I rushed my whole setup to work on this.My dialing plan was 
jacked.

Stressing my 1st lab is coming up shortly

Randall
 



From: Randall Crumm 
To: Online Study 
Sent: Saturday, June 4, 2011 3:07 PM
Subject: AAR and VM


HI,
I'm playing with mgcp gw and cuc and AAR. I have some issues every other time. 

when I call from pstn to br1 ph2 call goes to vm as expected.

When I lower the locations cac I need the call rerouted to vm. I am getting a 
busy signal.

I assigned the aar groups and css's


can someone explain the way the call get routed and what should I add as a mask 
on the hunt pilot and what RP should I use?

my phone mask is 617863 (1002)
vm pilot is 5600 (212394)

Thanks,
Randall___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] CUE and CME

[Randall Crumm]

Hi,
I have been having this issue more times than not. 

After configuring everything for CUE and IOS I have been having authentication 
errors when running the integrating  wizard.

Rebooting the rtr seems to help the issue.

Any thoughts?

Here is my config:

telephony-service
 no auto-reg-ephone
 max-ephones 8
 max-dn 8 no-reg both
 ip source-address 10.10.202.1 port 2000
 voicemail 3600
 max-conferences 8 gain -6
 call-forward pattern .T
 web admin system name admin password c1sc0123
 dn-webedit
 transfer-system full-consult

ip http server
ip http authentication local
no ip http secure-server
ip http path flash:/GUI

Thanks
randall___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] DEBUG MGCP PACKET

[Randall Crumm]

Hi,
Does someone have a good example of a debug mgcp packets and brief explanation?

RSIP/AUEP/AUCX


Thanks,
randall___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] CUC Phone View

[Randall Crumm]

Thanks for the link I got it working .

The doc is very good. Make sure you have the user with rights and control of 
the devices.

Randall



From: Ki Wi 
To: George Goglidze 
Cc: OSL Group ; Vik Malhi 
Sent: Sunday, June 5, 2011 2:05 AM
Subject: Re: [OSL | CCIE_Voice] CUC Phone View


I'm at this again today, still the same problem. Only HQ Ph1 can login for some 
unknown reason. =(

Anyone tested it's working fine on any phone? 


2011/6/1 George Goglidze 

Sorry for late answer, but just thought about one more thing, make sure the 
phone has CTI Control enabled, without this if you even have phone association 
with the correct user it will not work. 
>
>
>Same goes for all other services as voiceview on cue or ippm of cups. 
>
>
>Regards,
>
>Sent from my iPad
>
>On 29 May 2011, at 20:32, Ki Wi  wrote:
>
>
>Everything should be in place. I have manually matched the phone configuration 
>as well. 
>>
>>From HQ Ph1, i can login as others and still have option 4 available. It 
>>seems like this phone have some "special" configuration which others doesn't 
>>have.
>>
>>Anyway, it's ok. Gonna wipe out the configuration soon and try everything 
>>again. =)
>>
>>Thanks everyone! 
>>
>>
>>On Mon, May 30, 2011 at 2:52 AM, Vik Malhi  wrote:
>>
>>Just double check that you actually have a voicemail for the other users that 
>>are trying to use phoneview. Disable/enable globally and per user. Other than 
>>that- check the Authentication URL in the Enterprise params. Ensure hostname 
>>is replaced by UCM IPAddr. Seems to be a little flaky in this release.
>>>-- 
>>>Vik Malhi – CCIE #13890
>>>Managing Partner / Instructor - IPexpert, Inc.
>>>Mailto: vma...@ipexpert.com
>>>Telephone: +1.810.326.1444 ext 420
>>>Fax: +1.810.454.0130 
>>>Live Assistance, Please visit: www.ipexpert.com/chat 
>>> 
>>>
>>>IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, 
>>>Audio Tools, Online Hardware Rental and Classroom Training for the Cisco 
>>>CCIE (R&S, Voice, Wireless, Security & Service Provider) certification(s) 
>>>with training locations throughout the United States, Europe, South Asia and 
>>>Australia. Be sure to visit our online communities at 
>>>www.ipexpert.com/communities   and our 
>>>public website at www.ipexpert.com   
>>>
>>>
>>>From:  Ki Wi 
>>>Date:  Sun, 29 May 2011 21:38:31 +0800
>>>To:  George Goglidze 
>>>Cc:  OSL Group 
>>>Subject:  Re: [OSL | CCIE_Voice] CUC Phone View
>>>
>>>
>>>I have associated every phones into that ID. 
>>>
>>>Since lab is about speed, i don't think i want to waste time to pinpoint 
>>>those mac address in use. 
>>>
>>>
>>>On Sun, May 29, 2011 at 9:07 PM, George Goglidze  wrote:
>>>
>>>HQ phone 1 must be associated to the application user that is configured for 
>>>UC phone view.
Check the others too,

Sent from my iPad

On 29 May 2011, at 11:34, Ki Wi  wrote:


anyone tried it?
>
>I followed the guide closely from here 
>http://blog.ipexpert.com/2010/11/17/setting-up-phone-view/
>
>
>My HQ Ph1 can choose option 5 then follow by 4 to view the messages while 
>other phones such as HQ Ph2 and BR1 Ph1/2 didn't have the option 4 same as 
>a lot of others in the comment. 
>
>I used voicemail template so i deleted HQ Ph1 and HQ Ph2 and recreate them 
>again. The result is the same, HQ Ph1 can do phoneview and view the 
>messages while others can't. 
>
>Any tips on it?
>
___
>For more information regarding industry leading CCIE Lab training, please 
>visit www.ipexpert.com
>
>Are you a CCNP or CCIE and looking for a job? Check out 
>www.PlatinumPlacement.com
>>>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com
>>

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] Gatekeepr issue

[Randall Crumm]

HI,
I am having an issue. I keep getting the zone prefix 5... under the tech prefix 
3. I do not want it to show when I run the command show gatek gw

what am I doing wrong here...

thx
rc


hq-rtr
gatekeeper
 zone local HQ ipexpert.com
 zone prefix HQ 1... gw-priority 10 gk-trunk_2
 zone prefix HQ 1... gw-priority 9 gk-trunk_1
 zone prefix HQ 5... gw-priority 10 gk-trunk_2
 zone prefix HQ 5... gw-priority 9 gk-trunk_1
 no shutdown

HQ-RTR#show gatek end
                    GATEKEEPER ENDPOINT REGISTRATION
                    
CallSignalAddr  Port  RASSignalAddr   Port  Zone Name         Type    Flags
--- - --- - -             -
10.10.110.3     1720  10.10.110.3     51052 HQ                H323-GW
    H323-ID: BR2-RTR
    Voice Capacity Max.=  Avail.=  Current.= 0
10.10.210.10    1720  10.10.210.10    32980 HQ                VOIP-GW
    H323-ID: gk-trunk_1
    Voice Capacity Max.=  Avail.=  Current.= 0
10.10.210.11    1720  10.10.210.11    32786 HQ                VOIP-GW
    H323-ID: gk-trunk_2
    Voice Capacity Max.=  Avail.=  Current.= 0
Total number of active registrations = 3

HQ-RTR#show gatek gw
GATEWAY TYPE PREFIX TABLE
=
Prefix: 1#*
  Zone HQ master gateway list:
    10.10.210.11:1720 gk-trunk_2
    10.10.210.10:1720 gk-trunk_1
  Zone HQ prefix 1... priority gateway list(s):
   Priority 10:
    10.10.210.11:1720 gk-trunk_2
   Priority 9:
    10.10.210.10:1720 gk-trunk_1
  Zone HQ prefix 5... priority gateway list(s):
   Priority 10:
    10.10.210.11:1720 gk-trunk_2
   Priority 9:
    10.10.210.10:1720 gk-trunk_1

Prefix: 3*
  Zone HQ master gateway list:
    10.10.110.3:1720 BR2-RTR
  Zone HQ prefix 1... priority gateway list(s):
   Priority 5:
    10.10.110.3:1720 BR2-RTR
  Zone HQ prefix 5... priority gateway list(s):
   Priority 5:
    10.10.110.3:1720 BR2-RTR


br2
interface Loopback0
 ip address 10.10.110.3 255.255.255.255
 ip ospf network point-to-point
 h323-gateway voip interface
 h323-gateway voip id HQ ipaddr 10.10.110.1 1719
 h323-gateway voip h323-id BR2-RTR
 h323-gateway voip tech-prefix 3
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Gatekeepr issue

[Randall Crumm]

When I do that It is not being removed from the config.

gatekeeper
 zone local HQ ipexpert.com
 zone prefix HQ 1... gw-priority 10 gk-trunk_2
 zone prefix HQ 1... gw-priority 9 gk-trunk_1
 zone prefix HQ 1... gw-priority 0 BR2-RTR
 zone prefix HQ 5... gw-priority 10 gk-trunk_2
 zone prefix HQ 5... gw-priority 9 gk-trunk_1
 zone prefix HQ 5... gw-priority 0 BR2-RTR
 no shutdown


Prefix: 3*
  Zone HQ master gateway list:
    10.10.110.3:1720 BR2-RTR
  Zone HQ prefix 1... priority gateway list(s):
  Zone HQ prefix 5... priority gateway list(s):




From: Randall Saborio 
To: Randall Crumm 
Cc: Online Study 
Sent: Sunday, June 5, 2011 2:00 PM
Subject: Re: [OSL | CCIE_Voice] Gatekeepr issue


Just do:

zone prefix HQ 5... gw-priority 0 BR2-RTR
zone prefix HQ 1... gw-priority 0 BR2-RTR

Or:
zone prefix HQ 5... gw-default-priority 0
zone prefix HQ 1... gw-default-priority 0

Cheers,




On Sun, Jun 5, 2011 at 1:06 PM, Randall Crumm  wrote:

HI,
>I am having an issue. I keep getting the zone prefix 5... under the tech 
>prefix 3. I do not want it to show when I run the command show gatek gw
>
>
>what am I doing wrong here...
>
>
>thx
>rc
>
>
>
>
>hq-rtr
>gatekeeper
> zone local HQ ipexpert.com
> zone prefix HQ 1... gw-priority 10 gk-trunk_2
> zone prefix HQ 1... gw-priority 9 gk-trunk_1
> zone prefix HQ 5... gw-priority 10 gk-trunk_2
> zone prefix HQ 5... gw-priority 9 gk-trunk_1
> no shutdown
>
>
>HQ-RTR#show gatek end
>                    GATEKEEPER ENDPOINT REGISTRATION
>                    
>CallSignalAddr  Port  RASSignalAddr   Port  Zone Name         Type    Flags
>--- - --- - -             -
>10.10.110.3     1720  10.10.110.3     51052 HQ                H323-GW
>    H323-ID: BR2-RTR
>    Voice Capacity Max.=  Avail.=  Current.= 0
>10.10.210.10    1720  10.10.210.10    32980 HQ                VOIP-GW
>    H323-ID: gk-trunk_1
>    Voice Capacity Max.=  Avail.=  Current.= 0
>10.10.210.11    1720  10.10.210.11    32786 HQ                VOIP-GW
>    H323-ID: gk-trunk_2
>    Voice Capacity Max.=  Avail.=  Current.= 0
>Total number of active registrations = 3
>
>
>HQ-RTR#show gatek gw
>GATEWAY TYPE PREFIX TABLE
>=
>Prefix: 1#*
>  Zone HQ master gateway list:
>    10.10.210.11:1720 gk-trunk_2
>    10.10.210.10:1720 gk-trunk_1
>  Zone HQ prefix 1... priority gateway list(s):
>   Priority 10:
>    10.10.210.11:1720 gk-trunk_2
>   Priority 9:
>    10.10.210.10:1720 gk-trunk_1
>  Zone HQ prefix 5... priority gateway list(s):
>   Priority 10:
>    10.10.210.11:1720 gk-trunk_2
>   Priority 9:
>    10.10.210.10:1720 gk-trunk_1
>
>
>Prefix: 3*
>  Zone HQ master gateway list:
>    10.10.110.3:1720 BR2-RTR
>  Zone HQ prefix 1... priority gateway list(s):
>   Priority 5:
>    10.10.110.3:1720 BR2-RTR
>  Zone HQ prefix 5... priority gateway list(s):
>   Priority 5:
>    10.10.110.3:1720 BR2-RTR
>
>
>
>
>br2
>interface Loopback0
> ip address 10.10.110.3 255.255.255.255
> ip ospf network point-to-point
> h323-gateway voip interface
> h323-gateway voip id HQ ipaddr 10.10.110.1 1719
> h323-gateway voip h323-id BR2-RTR
> h323-gateway voip tech-prefix 3
>
>
>___
>For more information regarding industry leading CCIE Lab training, please 
>visit www.ipexpert.com
>
>Are you a CCNP or CCIE and looking for a job? Check out 
>www.PlatinumPlacement.com
>


-- 
Randall "da ill" Saborio
CCIE Voice Wannabe #10054675811___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Gatekeepr issue

[Randall Crumm]

AHHH
That did it

hq-rtr
gatekeeper
zone prefix HQ 5... gw-priority 0 BR2-RTR
zone prefix HQ 1... gw-priority 0 BR2-RTR


shut
no shut




I got it to work before just didn't remember the sequence.

Thanks Randall and Miron

Good luck Miron

Randall



From: Randall Saborio 
To: Randall Crumm 
Cc: Online Study 
Sent: Sunday, June 5, 2011 2:29 PM
Subject: Re: [OSL | CCIE_Voice] Gatekeepr issue


At least it is not pointing to any GW now, so I don't see it as a problem.
Perhaps try shut/no shut on GK?


On Sun, Jun 5, 2011 at 3:18 PM, Randall Crumm  wrote:

When I do that It is not being removed from the config.
>
>
>gatekeeper
> zone local HQ ipexpert.com
> zone prefix HQ 1... gw-priority 10 gk-trunk_2
> zone prefix HQ 1... gw-priority 9 gk-trunk_1
> zone prefix HQ 1... gw-priority 0 BR2-RTR
> zone prefix HQ 5... gw-priority 10 gk-trunk_2
> zone prefix HQ 5... gw-priority 9 gk-trunk_1
> zone prefix HQ 5... gw-priority 0 BR2-RTR
> no shutdown
>
>
>
>
>Prefix: 3*
>  Zone HQ master gateway list:
>    10.10.110.3:1720 BR2-RTR
>  Zone HQ prefix 1... priority gateway list(s):
>  Zone HQ prefix 5... priority gateway list(s):
>
>
>
>
>
>
>From: Randall Saborio 
>To: Randall Crumm 
>Cc: Online Study 
>Sent: Sunday, June 5, 2011 2:00 PM
>Subject: Re: [OSL | CCIE_Voice] Gatekeepr issue
>
>
>
>Just do:
>
>zone prefix HQ 5... gw-priority 0 BR2-RTR
>zone prefix HQ 1... gw-priority 0 BR2-RTR
>
>Or:
>zone prefix HQ 5... gw-default-priority 0
>zone prefix HQ 1... gw-default-priority 0
>
>Cheers,
>
>
>
>
>On Sun, Jun 5, 2011 at 1:06 PM, Randall Crumm  wrote:
>
>HI,
>>I am having an issue. I keep getting the zone prefix 5... under the tech 
>>prefix 3. I do not want it to show when I run the command show gatek gw
>>
>>
>>what am I doing wrong here...
>>
>>
>>thx
>>rc
>>
>>
>>
>>
>>hq-rtr
>>gatekeeper
>> zone local HQ ipexpert.com
>> zone prefix HQ 1... gw-priority 10 gk-trunk_2
>> zone prefix HQ 1... gw-priority 9 gk-trunk_1
>> zone prefix HQ 5... gw-priority 10 gk-trunk_2
>> zone prefix HQ 5... gw-priority 9 gk-trunk_1
>> no shutdown
>>
>>
>>HQ-RTR#show gatek end
>>                    GATEKEEPER ENDPOINT REGISTRATION
>>                    
>>CallSignalAddr  Port  RASSignalAddr   Port  Zone Name         Type    Flags
>>--- - --- - -             -
>>10.10.110.3     1720  10.10.110.3     51052 HQ                H323-GW
>>    H323-ID: BR2-RTR
>>    Voice Capacity Max.=  Avail.=  Current.= 0
>>10.10.210.10    1720  10.10.210.10    32980 HQ                VOIP-GW
>>    H323-ID: gk-trunk_1
>>    Voice Capacity Max.=  Avail.=  Current.= 0
>>10.10.210.11    1720  10.10.210.11    32786 HQ                VOIP-GW
>>    H323-ID: gk-trunk_2
>>    Voice Capacity Max.=  Avail.=  Current.= 0
>>Total number of active registrations = 3
>>
>>
>>HQ-RTR#show gatek gw
>>GATEWAY TYPE PREFIX TABLE
>>=
>>Prefix: 1#*
>>  Zone HQ master gateway list:
>>    10.10.210.11:1720 gk-trunk_2
>>    10.10.210.10:1720 gk-trunk_1
>>  Zone HQ prefix 1... priority gateway list(s):
>>   Priority 10:
>>    10.10.210.11:1720 gk-trunk_2
>>   Priority 9:
>>    10.10.210.10:1720 gk-trunk_1
>>  Zone HQ prefix 5... priority gateway list(s):
>>   Priority 10:
>>    10.10.210.11:1720 gk-trunk_2
>>   Priority 9:
>>    10.10.210.10:1720 gk-trunk_1
>>
>>
>>Prefix: 3*
>>  Zone HQ master gateway list:
>>    10.10.110.3:1720 BR2-RTR
>>  Zone HQ prefix 1... priority gateway list(s):
>>   Priority 5:
>>    10.10.110.3:1720 BR2-RTR
>>  Zone HQ prefix 5... priority gateway list(s):
>>   Priority 5:
>>    10.10.110.3:1720 BR2-RTR
>>
>>
>>
>>
>>br2
>>interface Loopback0
>> ip address 10.10.110.3 255.255.255.255
>> ip ospf network point-to-point
>> h323-gateway voip interface
>> h323-gateway voip id HQ ipaddr 10.10.110.1 1719
>> h323-gateway voip h323-id BR2-RTR
>> h323-gateway voip tech-prefix 3
>>
>>
>>___
>>For more information regarding industry leading CCIE Lab training, please 
>>visit www.ipexpert.com
>>
>>Are you a CCNP or CCIE and looking for a job? Check out 
>>www.PlatinumPlacement.com
>>
>
>
>-- 
>Randall "da ill" Saborio
>CCIE Voice Wannabe #10054675811
>
>
>
>


-- 
Randall "da ill" Saborio
CCIE Voice Wannabe #10054675811___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] CUC Phone View

[Randall Crumm]

Here it is...

http://blog.ipexpert.com/2010/11/17/setting-up-phone-view/



From: Amit Singh 
To: Randall Crumm 
Sent: Sunday, June 5, 2011 2:31 PM
Subject: Re: [OSL | CCIE_Voice] CUC Phone View


Hi Randall. 

Could u please share that link. Thanks. 


Regards
Sent from my iPad

On 6/06/2011, at 6:06 AM, Randall Crumm  wrote:


Thanks for the link I got it working .
>
>
>The doc is very good. Make sure you have the user with rights and control of 
>the devices.
>
>
>Randall
>
>
>
>
>From: Ki Wi 
>To: George Goglidze 
>Cc: OSL Group ; Vik Malhi 
>Sent: Sunday, June 5, 2011 2:05 AM
>Subject: Re: [OSL | CCIE_Voice] CUC Phone View
>
>
>I'm at this again today, still the same problem. Only HQ Ph1 can login for 
>some unknown reason. =(
>
>Anyone tested it's working fine on any phone? 
>
>
>2011/6/1 George Goglidze 
>
>Sorry for late answer, but just thought about one more thing, make sure the 
>phone has CTI Control enabled, without this if you even have phone association 
>with the correct user it will not work. 
>>
>>
>>Same goes for all other services as voiceview on cue or ippm of cups. 
>>
>>
>>Regards,
>>
>>Sent from my iPad
>>
>>On 29 May 2011, at 20:32, Ki Wi  wrote:
>>
>>
>>Everything should be in place. I have manually matched the phone 
>>configuration as well. 
>>>
>>>From HQ Ph1, i can login as others and still have option 4 available. It 
>>>seems like this phone have some "special" configuration which others doesn't 
>>>have.
>>>
>>>Anyway, it's ok. Gonna wipe out the configuration soon and try everything 
>>>again. =)
>>>
>>>Thanks everyone! 
>>>
>>>
>>>On Mon, May 30, 2011 at 2:52 AM, Vik Malhi  wrote:
>>>
>>>Just double check that you actually have a voicemail for the other users 
>>>that are trying to use phoneview. Disable/enable globally and per user. 
>>>Other than that- check the Authentication URL in the Enterprise params. 
>>>Ensure hostname is replaced by UCM IPAddr. Seems to be a little flaky in 
>>>this release.
>>>>-- 
>>>>Vik Malhi – CCIE #13890
>>>>Managing Partner / Instructor - IPexpert, Inc.
>>>>Mailto: vma...@ipexpert.com
>>>>Telephone: +1.810.326.1444 ext 420
>>>>Fax: +1.810.454.0130 
>>>>Live Assistance, Please visit: www.ipexpert.com/chat 
>>>><http://www.ipexpert.com/chat> 
>>>>
>>>>IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, 
>>>>Audio Tools, Online Hardware Rental and Classroom Training for the Cisco 
>>>>CCIE (R&S, Voice, Wireless, Security & Service Provider) certification(s) 
>>>>with training locations throughout the United States, Europe, South Asia 
>>>>and Australia. Be sure to visit our online communities at 
>>>>www.ipexpert.com/communities <http://www.ipexpert.com/communities>  and our 
>>>>public website at www.ipexpert.com <http://www.ipexpert.com/>  
>>>>
>>>>
>>>>From:  Ki Wi 
>>>>Date:  Sun, 29 May 2011 21:38:31 +0800
>>>>To:  George Goglidze 
>>>>Cc:  OSL Group 
>>>>Subject:  Re: [OSL | CCIE_Voice] CUC Phone View
>>>>
>>>>
>>>>I have associated every phones into that ID. 
>>>>
>>>>Since lab is about speed, i don't think i want to waste time to pinpoint 
>>>>those mac address in use. 
>>>>
>>>>
>>>>On Sun, May 29, 2011 at 9:07 PM, George Goglidze  wrote:
>>>>
>>>>HQ phone 1 must be associated to the application user that is configured 
>>>>for UC phone view.
>>>>>Check the others too,
>>>>>
>>>>>Sent from my iPad
>>>>>
>>>>>On 29 May 2011, at 11:34, Ki Wi  wrote:
>>>>>
>>>>>
>>>>>anyone tried it?
>>>>>>
>>>>>>I followed the guide closely from here 
>>>>>>http://blog.ipexpert.com/2010/11/17/setting-up-phone-view/
>>>>>>
>>>>>>
>>>>>>My HQ Ph1 can choose option 5 then follow by 4 to view the messages while 
>>>>>>other phones such as HQ Ph2 and BR1 Ph1/2 didn't have the option 4 same 
>>>>>>as a lot of others in the comment. 
>>>>>>
>>>>>>I used voicemail template 

Re: [OSL | CCIE_Voice] #29164

[Randall Crumm]

Congratulations!!!

Thanks for the help!

randall







From: Miron Kobelski 
To: ccie_voice@onlinestudylist.com
Sent: Tuesday, June 7, 2011 10:06 PM
Subject: [OSL | CCIE_Voice] #29164


I received my number yesterday :) 

This list has been very helpful during my preparations, so thank you all and I 
wish you good luck with your exams!

best regards
kobel

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Disable G.722?

[Randall Crumm]

If the phones can negotiate g722 they will

Randall




From: Michael Luo 
To: ccie_voice@onlinestudylist.com
Sent: Friday, June 10, 2011 1:03 PM
Subject: [OSL | CCIE_Voice] Disable G.722?


I heard the rumor that even if you specify G.711 as intra-region codec, you'll 
have to disable G.722 in Enterprise Parameters and Service Parameters.  
Otherwise, G.722 will be chosen.

I tested it in the lab.  That was not the case.  If I explicitly specified 
G.711 as intra-region codec, the phones will always use G.711.

Do we still need to disable G.722?

Thanks!

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] CME in Exam dual-line or octo-line ?

[Randall Crumm]

I would think you would be told not to use octo line, if not, use octo-line.
 
You never know what is next...
 
 
mho
randall
 

From: cisco cisco 
To: ccie_voice@onlinestudylist.com; francesc.ro...@tecnocom.es
Sent: Sunday, June 12, 2011 8:07 AM
Subject: Re: [OSL | CCIE_Voice] CME in Exam dual-line or octo-line ?


If allowed I prefer to use the octo-line for the behaviour more similar to CUCM 
dn.

Check this :

http://blog.ipexpert.com/tags/octo-line/



___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] CUPS Presence only showing Devices from BR1 and not HQ / Disconnecting (pending retry) under Server health

[Randall Crumm]

Have you checked the owner of the phone?rcFrom: Alan Gardner To: "ccie_voice@onlinestudylist.com" Sent: Tuesday, June 14, 2011 8:12 AMSubject: [OSL | CCIE_Voice] CUPS Presence only showing Devices from BR1 and not HQ / Disconnecting (pending retry) under Server health
Done the integration and if I go to User management and end users all of my BR1 show devices, but all my HQ phone do not show devices.   I have checked my line to user association all good.  I have checked my End user in cucm- all good. I have compared all of them and cannot figure out what could be different.  Any ideas.      Also getting  Disconnecting (pending retry) under Server health    Best Regards,Alan GardnerChief Executive OfficerCurrent Technologies Computer Learning CenterPH. 219.764.3800agard...@ctclc.com MCT, MCSE (Messaging & Security), MCSD, MSF Trainer, MCNI, MCNE, MCSA, CCNA, , ITILCCNP, CCVP, CCIP, CCDP, CCIE # 22758, CCSIA+, MCDST, Network+,
 Server+, IT Project+,EBIZ, CTT+, MCDBA CCNT, CISSP, CWNA, CTP, CIWMicrosoft Server 2008 Enterprise Administrator   ___For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.comAre you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] SRST - "Phones should work same as it isregistered with CUCM"

[Randall Crumm]

I would add softkeys as well..



Randall



From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Greg
Sent: Wednesday, June 15, 2011 8:53 AM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] SRST - "Phones should work same as it
isregistered with CUCM"



Can anyone give suggestion on how to meet the requirement of "Phones
should work same as it is registered with CUCM"?



It's a very broad topic since there are so many features on CUCM.



Here's what I can think of:



1) Basic call routing (phone to phone, intra and inter sites, PSTN
calls) both outgoing and incoming.

2) Secondary dial tone

3) Voicemail (voicemail button, voicemail pilot number, CFwd Busy, CFwd
No answer)

4) multi-channel support, hold, conference.

5) Do we need to care about corporate directory?  How about calling
names in SRST mode?



Thanks!


 
Legal Disclaimer:
The information contained in this message may be privileged and confidential. 
It is intended to be read only by the individual or entity to whom it is 
addressed or by their designee. If the reader of this message is not the 
intended recipient, you are on notice that any distribution of this message, in 
any form, is strictly prohibited. If you have received this message in error, 
please immediately notify the sender and delete or destroy any copy of this 
message

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] HQ Phones not Registering

[Randall Crumm]

Can you manually add them and see an IP address on CUCM list of devices?



Randall



From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Vinay
Kumar6
Sent: Thursday, June 16, 2011 7:39 AM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] HQ Phones not Registering



Hi,

Facing difficulty in registering the HQ Phones to CUCM,  Routing is
enabled on the HQ router and Vlans are created on the switch. Phones are
able to get the IP address from the CUCM (DHCP) server., Not sure what
exactly to check for.

Warm Regards,
Vinay Kumar


 
Legal Disclaimer:
The information contained in this message may be privileged and confidential. 
It is intended to be read only by the individual or entity to whom it is 
addressed or by their designee. If the reader of this message is not the 
intended recipient, you are on notice that any distribution of this message, in 
any form, is strictly prohibited. If you have received this message in error, 
please immediately notify the sender and delete or destroy any copy of this 
message

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] HQ Phones not Registering

[Randall Crumm]

Also you can ssh into the pub and disable CSA and enable it.



RC



From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of shabeeb
mohammed
Sent: Thursday, June 16, 2011 8:38 AM
To: Vinay Kumar6
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] HQ Phones not Registering



Hi,

I faced a similar issue couple of days back.. I had configured the DHCP
in my CUCM. The problem was the in the DHCP IP Schema, 1 digit went
wrong, so nothing was registering. it took me nearly 2 days to figure
this out..

take a closer look and you might figure out something.

If this doesnt work, try removing the DHCP from the CUCM and put them in
the router/switch.. while doing this dont forget the to use the option
150..

Regards
Shabeeb Mohammed



On Thu, Jun 16, 2011 at 6:39 PM, Vinay Kumar6 
wrote:

Hi,

Facing difficulty in registering the HQ Phones to CUCM,  Routing is
enabled on the HQ router and Vlans are created on the switch. Phones are
able to get the IP address from the CUCM (DHCP) server., Not sure what
exactly to check for.

Warm Regards,
Vinay Kumar

___
For more information regarding industry leading CCIE Lab training,
please visit www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com




 
Legal Disclaimer:
The information contained in this message may be privileged and confidential. 
It is intended to be read only by the individual or entity to whom it is 
addressed or by their designee. If the reader of this message is not the 
intended recipient, you are on notice that any distribution of this message, in 
any form, is strictly prohibited. If you have received this message in error, 
please immediately notify the sender and delete or destroy any copy of this 
message

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] How to avoid phone firmware upgrade in thelab

[Randall Crumm]

lol



From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Roger
Carpio
Sent: Tuesday, June 21, 2011 1:52 PM
To: Pithog Oil
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] How to avoid phone firmware upgrade in
thelab



If the previous candidate using your lab spot changed the protocol as
requested, let's say his lab had SIP and now yours is SCCP; there is
nothing you can do to avoid this. It is not necessarily a waste of time;
unless you keep staring at the phones LOL

Regards,
Roger Carpio.

On Tue, Jun 21, 2011 at 2:16 PM, Pithog Oil  wrote:

Hi Experts,

what should i do so as to avoid phone firmware upgrade at the lab, i
have discovered that some times i unknowingly have a phone firmware
upgrade from one version to another.

Kind assist it is usually a waste of time.

Pithog Oil


___
For more information regarding industry leading CCIE Lab training,
please visit www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com




 
Legal Disclaimer:
The information contained in this message may be privileged and confidential. 
It is intended to be read only by the individual or entity to whom it is 
addressed or by their designee. If the reader of this message is not the 
intended recipient, you are on notice that any distribution of this message, in 
any form, is strictly prohibited. If you have received this message in error, 
please immediately notify the sender and delete or destroy any copy of this 
message

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] looking for router,switch and phones

[Randall Crumm]

HI,
I am looking for a router,POE switch and phones for my home lab.
 
Please email me if you are looking to sell something.
 
Thanks,
Randall___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] CME and CUE

[Randall Crumm]

HI,
I have had issues authenticating my web user in the setup wizard. My question, 
is there a certain sequence of CLI commands to make local authentication work?
I don't have a config to show but I do have compared my configuration to the PG 
config and they are exact.

I have even changed the password, although you can see it.

Thx
Randall___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Setting up home equipment

[Randall Crumm]

Thanks everyone!!



From: Michael Roger 
To: 'Rrcrumm' ; 'Ccie' 
Sent: Tuesday, June 28, 2011 8:40 PM
Subject: RE: [OSL | CCIE_Voice] Setting up home equipment

You need minimum 7961 for plus dialing.

-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Rrcrumm
Sent: Tuesday, June 28, 2011 7:09 PM
To: Ccie
Subject: [OSL | CCIE_Voice] Setting up home equipment

Hi
I'm setting up a switch, router and phones and the proctorlabs racks. I plan
on using 7960 phones because they are cheaper

Is there any reason to get  7961's? I'm just keeping the cost down

Thanks
Randall
Sent from my iPhone
___
For more information regarding industry leading CCIE Lab training, please
visit www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] hw vpn config

[Randall Crumm]

Hi,
Who has a HW VPN? I need a working configuration for my home router?

Thanks,
Randall
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] Config for 2600XM

[Randall Crumm]

HI,
I have a 2610XM router I am trying to setup for a hw vpn.
 
Does someone have working config they could send me?
 
Thanks,
randall___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Config for 2600XM

[Randall Crumm]

I got it thanks


From: Randall Crumm 
To: Online Study 
Sent: Sunday, August 28, 2011 4:09 PM
Subject: [OSL | CCIE_Voice] Config for 2600XM


HI,
I have a 2610XM router I am trying to setup for a hw vpn.

Does someone have working config they could send me?

Thanks,
randall
 
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] WB 2 Lab 8 4.3 Live recored

[Randall Crumm]

HI,
I hope someone can help me. I am not sure I am testing this correctly (maybe I 
am reading too much into the question).

I setup live record and it works internally.

I add an alternative extension to a VM box, (2123942123) line 2 PSTN.
1. If I dial 394-5610, it records the conversation and leaves the VM in x5002 
VMB,  but I am not talking to anyone.

2. If I dial 394-5002, put him on hold and dial 394-5610, I get a message, 
Hello Cisco Unity messaging system, from a touchtone telephone...

I followed the DSG.

Am I doing something wrong? Maybe this is really what the question is asking. I 
think I should be able to do test 2

Thanks for the help

Randall___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Proctor Labs down again?

[Randall Crumm]

I've been is since 6:30 am PST
No problems
randall



From: donny f 
To: Brian Mulgrew 
Cc: ccie_voice@onlinestudylist.com
Sent: Monday, October 3, 2011 9:06 AM
Subject: Re: [OSL | CCIE_Voice] Proctor Labs down again?


you guys still lucky, not having down few days before lab exam


On Sun, Oct 2, 2011 at 11:44 AM, Brian Mulgrew  wrote:

Hi - has anyone been able to connect to the voice racks since yesterday's 
outage?
> 
>I have logged a case but was advised 5 hours ago that there is still a vpn 
>issue with no eta for a fix.
> 
>Cheers
>Brian
>
>___
>For more information regarding industry leading CCIE Lab training, please 
>visit www.ipexpert.com
>
>Are you a CCNP or CCIE and looking for a job? Check out 
>www.PlatinumPlacement.com
>

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] PREDOT DDI vs NANP:PREDOT DDI

[Randall Crumm]

I am looking at my Route list. I clicked edit next to the RL on the RP. Then 
scrolled down and in the bottom left corner clicked on the RG and can edit the 
translations.
DDI is there as well.

Randall



From: Ken Wyan 
To: Randall.Crumm 
Cc: "ccie_voice@onlinestudylist.com" 
Sent: Sunday, October 2, 2011 8:31 AM
Subject: Re: [OSL | CCIE_Voice] PREDOT DDI vs NANP:PREDOT DDI


Randall,
 
Thanks for your reply with how to access digit manipulation in RG/RL. I might 
not 
 
But my problem is PRE DOT DDI is not available as a selectable option in RG/RL. 
Closest match is NANP: PRE DOT DDI ( I am not sure is it ok for non US dial 
plans)
 
But in Route Pattern NANP:PRE DOT & PRE DOT are available as two seperate 
options to be selected.
 
I hope you will understand my problem.


 
On Sun, Oct 2, 2011 at 8:01 PM, Randall.Crumm  wrote:

If you have a route list with multiple route groups just scroll to the bottom 
of the page of the rl and select a rg and them you can do your digit 
manipulation
>Hth
>Randall
>
>Sent from my iPhone
>
>
>On Oct 1, 2011, at 11:11 PM, Ken Wyan  wrote:
>
>> Hi Experts,
>>
>> I want to strip digits of called number from CUCM (outgoing from CUCM).
>>
>> PREDOT DDI option is not available in Route-List / Route-Group level (unlike 
>> in route pattern).
>>
>> If we don't have NANP & want to strip predot-digits at route-group level 
>> what is the option? IPX Solutions just use NANP:PREDOT DDI ; but I have a 
>> doubt.
>>
>> Ken
>> ___
>> For more information regarding industry leading CCIE Lab training, please 
>> visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out 
>> www.PlatinumPlacement.com
>

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] IP Blue (running multiple instances)

[Randall Crumm]

Hi,
You need to create a shortcut. Right click the shortcut and put the /d at the 
end of the field in the Target field.

HTH

Randall




From: Jeferson Guardia 
To: OSL Voice 
Sent: Friday, October 14, 2011 1:10 PM
Subject: [OSL | CCIE_Voice] IP Blue (running multiple instances)


Hi,

I am able to register many phones, do the regedit thing etc. but the only thing 
that doesnt work for me is the "/d" added into the path at the end of the 
shortcut command. It appears
that VTGO PC Lite doesnt work loading up many instances for IP Blue on Windows 
7. Any ideas?

-- 
Jeferson Guardia
CCIE #28157

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] IP Blue (running multiple instances)

[Randall Crumm]

I have w7 64 bit and I have 2 instances started. I am not in a IPexpert lab, so 
i can't get them registered, but I can open two.

HTH,
Randall




From: Jeferson Guardia 
To: Ashraf Ayyash 
Cc: OSL Voice 
Sent: Saturday, October 15, 2011 5:46 PM
Subject: Re: [OSL | CCIE_Voice] IP Blue (running multiple instances)


this has been solved - win 7 doesnt support multiple ip blues instances and it 
is official written on their website.

I downloaded a very light Win XP image (250mb) from my company and had a new 
vmware machine where I`ll do all kinds of IE voice stuff such as phoneview / 
ipblue etc.. 

way to go! so bad win 7 doesnt to support but at the end .. the xp is running 
much more smooth in vmware fusion.

Regards,


2011/10/15 Jeferson Guardia 

No it doesnt. I put the /d at the end of the shortcut, but just one instance 
loads up... :(
>
>
>
>2011/10/14 Ashraf Ayyash 
>
>google doesnt have any answer for this ?
>>
>>Ash
>>
>>
>>On Fri, Oct 14, 2011 at 1:10 PM, Jeferson Guardia  wrote:
>>> Hi,
>>> I am able to register many phones, do the regedit thing etc. but the only
>>> thing that doesnt work for me is the "/d" added into the path at the end of
>>> the shortcut command. It appears
>>> that VTGO PC Lite doesnt work loading up many instances for IP Blue on
>>> Windows 7. Any ideas?
>>>
>>> --
>>> Jeferson Guardia
>>> CCIE #28157
>>>
>>
>>> ___
>>> For more information regarding industry leading CCIE Lab training, please
>>> visit www.ipexpert.com
>>>
>>> Are you a CCNP or CCIE and looking for a job? Check out
>>> www.PlatinumPlacement.com
>>>
>>
>
>
>
>-- 
>Jeferson Guardia
>CCIE #28157
>


-- 
Jeferson Guardia
CCIE #28157

___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] Study Partners Group / New Labs focus

[Randall Crumm]

Hi,
I am getting the new labs (should be this week) and I wanted to see who wants 
to get into a study group.
I would like to focus mostly on the new labs since these will be the most 
updated info. 

I am in  PST -8 time zone.

You can email me directly if you would like to form a group. I think several 
people will be better and we can get or answers faster.

Thanks,
Randall
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Study Partners Group / New Labs focus

[Randall Crumm]

HI,
I am referring to the new labs in this 
link, https://www.ipexpert.com/Cisco/CCIE/Voice/Handbook. If you are not aware 
of these you should add Wayne Lawson on facebook to find out about new products 
and specials.

If you have been to boot-camp, you know the 2ND lab especially, had some new 
tasks and troubleshooting. Based on my personal CCIE experience I think this 
will be very helpful. According to Vik, these will be more up to date.

FYI,I live in the Bay Area in California.

HTH,
Let me know you if you are interested in a group-study.

Randall






From: Randall Crumm 
To: Online Study 
Sent: Monday, October 17, 2011 1:38 PM
Subject: Study Partners Group / New Labs focus


Hi,
I am getting the new labs (should be this week) and I wanted to see who wants 
to get into a study group.
I would like to focus mostly on the new labs since these will be the most 
updated info. 

I am in  PST -8 time zone.

You can email me directly if you would like to form a group. I think several 
people will be better and we can get or answers faster.

Thanks,
Randall___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Can't register HQ but got BR1 registered

[Randall Crumm]

sorry VLAN.



From: "pithog...@yahoo.com" 
To: Rrcrumm 
Cc: "ccie_voice@onlinestudylist.com" 
Sent: Monday, October 17, 2011 6:32 PM
Subject: Re: [OSL | CCIE_Voice] Can't register HQ but got BR1 registered

Please I am trying to understand what you mean by bland, please assist with 
more details, thanks.

Pithog oil
Sent from my BlackBerry® Smartphone, from Etisalat. Enjoy high speed internet 
service with Etisalat easy net, available at all our experience centres

-Original Message-
From: Rrcrumm 
Date: Mon, 17 Oct 2011 17:58:11 
To: pithog...@yahoo.com
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Can't register HQ but got BR1 registered

Do you have bland configured on the switch and port?

Randall

Sent from my iPhone

On Oct 17, 2011, at 9:21 AM, pithog...@yahoo.com wrote:

> Hi experts,
> 
> Please assist with this issues , I got my Br 1 phone registered in the lab 
> and my HQ phones were not registered .
> 
> Please advice on what might have been the issue.
> 
> Kind regards
> 
> Pithogoil
> Sent from my BlackBerry® Smartphone, from Etisalat. Enjoy high speed internet 
> service with Etisalat easy net, available at all our experience centres
> ___
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com
> 
> Are you a CCNP or CCIE and looking for a job? Check out 
> www.PlatinumPlacement.com___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Can't register HQ but got BR1 registered

[Randall Crumm]

Did u check your option 150 in your HQ DHCP scope? and ip-helper address under 
the hq rtr voice interface? What are the TFTP server IP addresses under the 
phone network settings?

hth
Randall



From: "pithog...@yahoo.com" 
To: Randall Crumm 
Sent: Monday, October 17, 2011 7:54 PM
Subject: Re: [OSL | CCIE_Voice] Can't register HQ but got BR1 registered


I will be will to join your study group please. Let me know how it goes.

The phone registeration problem I encountered is un imaginable.

Pithogoil
Sent from my BlackBerry® Smartphone, from Etisalat. Enjoy high speed internet 
service with Etisalat easy net, available at all our experience centres
____

From:  Randall Crumm  
Date: Mon, 17 Oct 2011 19:20:31 -0700 (PDT)
To: pithog...@yahoo.com
ReplyTo:  Randall Crumm  
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Can't register HQ but got BR1 registered

sorry VLAN.



From: "pithog...@yahoo.com" 
To: Rrcrumm 
Cc: "ccie_voice@onlinestudylist.com" 
Sent: Monday, October 17, 2011 6:32 PM
Subject: Re: [OSL | CCIE_Voice] Can't register HQ but got BR1 registered

Please I am trying to understand what you mean by bland, please assist with 
more details, thanks.

Pithog oil
Sent from my BlackBerry® Smartphone, from Etisalat. Enjoy high speed internet 
service with Etisalat easy net, available at all our experience centres

-Original Message-
From: Rrcrumm 
Date: Mon, 17 Oct 2011 17:58:11 
To: pithog...@yahoo.com
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL |
 CCIE_Voice] Can't register HQ but got BR1 registered

Do you have bland configured on the switch and port?

Randall

Sent from my iPhone

On Oct 17, 2011, at 9:21 AM, pithog...@yahoo.com wrote:

> Hi experts,
> 
> Please assist with this issues , I got my Br 1 phone registered in the lab 
> and my HQ phones were not registered .
> 
> Please advice on what might have been the issue.
> 
> Kind regards
> 
> Pithogoil
> Sent from my BlackBerry® Smartphone, from Etisalat. Enjoy high speed internet 
> service with Etisalat easy net, available at all our experience centres
> ___
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com
> 
>
 Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Can't register HQ but got BR1 registered

[Randall Crumm]

you need IP helper address if thed server is on a ifferent subnet than the 
phones.







From: "pithog...@yahoo.com" 
To: Randall Crumm 
Cc: Online Study 
Sent: Monday, October 17, 2011 8:23 PM
Subject: Re: [OSL | CCIE_Voice] Can't register HQ but got BR1 registered


I don't think I needed the ip helper address, it was a Dhcp server configured 
on publisher, and I had my tftp server inputed as my cucm sub.

Regards
Sent from my BlackBerry® Smartphone, from Etisalat. Enjoy high speed internet 
service with Etisalat easy net, available at all our experience centres
________

From:  Randall Crumm  
Date: Mon, 17 Oct 2011 20:18:37 -0700 (PDT)
To: pithog...@yahoo.com
ReplyTo:  Randall Crumm  
Cc: Online Study
Subject: Re: [OSL | CCIE_Voice] Can't register HQ but got BR1 registered

Did u check your option 150 in your HQ DHCP scope? and ip-helper address under 
the hq rtr voice interface? What are the TFTP server IP addresses under the 
phone network settings?

hth
Randall



From: "pithog...@yahoo.com" 
To: Randall Crumm 
Sent: Monday, October 17, 2011 7:54 PM
Subject: Re: [OSL | CCIE_Voice] Can't register HQ but got BR1 registered


I will be will to join your study group please. Let me know how it goes.

The phone registeration problem I encountered is un imaginable.

Pithogoil
Sent from my BlackBerry® Smartphone, from Etisalat. Enjoy high speed internet 
service with Etisalat easy net, available at all our experience centres
________

From:  Randall Crumm  
Date: Mon, 17 Oct 2011 19:20:31 -0700 (PDT)
To: pithog...@yahoo.com
ReplyTo:  Randall Crumm  
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Can't register HQ but got BR1 registered

sorry VLAN.



From: "pithog...@yahoo.com" 
To: Rrcrumm 
Cc: "ccie_voice@onlinestudylist.com" 
Sent: Monday, October 17, 2011 6:32 PM
Subject: Re: [OSL | CCIE_Voice] Can't register HQ but got BR1 registered

Please I am trying to understand what you mean by bland, please assist with 
more details, thanks.

Pithog oil
Sent from my BlackBerry® Smartphone, from Etisalat. Enjoy high speed internet 
service with Etisalat easy net, available at all our experience centres

-Original Message-
From: Rrcrumm 
Date: Mon, 17 Oct 2011 17:58:11 
To: pithog...@yahoo.com
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL |
 CCIE_Voice] Can't register HQ but got BR1 registered

Do you have bland configured on the switch and port?

Randall

Sent from my iPhone

On Oct 17, 2011, at 9:21 AM, pithog...@yahoo.com wrote:

> Hi experts,
> 
> Please assist with this issues , I got my Br 1 phone registered in the lab 
> and my HQ phones were not registered .
> 
> Please advice on what might have been the issue.
> 
> Kind regards
> 
> Pithogoil
> Sent from my BlackBerry® Smartphone, from Etisalat. Enjoy high speed internet 
> service with Etisalat easy net, available at all our experience centres
> ___
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com
> 
>
 Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] AAR and Unity Connection

[Randall Crumm]

Hi,
I am adding the AAR group in CUCM. The name is CUCM. Do I need to put anything 
in the prefix digits within CUCM?

Is there a rule as to when you would add something? Why/when would you add 
something?

Thanks,
Randall___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] CME phone message display

[Randall Crumm]

HI,
How do we change the message displayed on the phone when the phone is idle?  
What about other states as well.

Thanks,
Randall___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] CME phone message display

[Randall Crumm]

Thanks I'll try it



From: "rschukne...@gmx.de" 
To: Randall Crumm ; ccie_voice@onlinestudylist.com
Sent: Wednesday, November 2, 2011 12:08 PM
Subject: Re: [OSL | CCIE_Voice] CME phone message display

Hi Randall,

telephony-service
system message Your CME Options:

It works only for idle state.

/Robert
 Original-Nachricht 
> Datum: Wed, 2 Nov 2011 09:50:36 -0700 (PDT)
> Von: Randall Crumm 
> An: Online Study 
> Betreff: [OSL | CCIE_Voice] CME phone message display

> HI,
> How do we change the message displayed on the phone when the phone is
> idle?  What about other states as well.
> 
> Thanks,
> Randall

-- 
NEU: FreePhone - 0ct/min Handyspartarif mit Geld-zurück-Garantie!        
Jetzt informieren: http://www.gmx.net/de/go/freephone___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] CME/CUE

[Randall Crumm]

HI,
I have a weird problem. When I try to run the wizard from the web gui, it is 
asking for web username and password.
I am putting in admin and cisco and I am getting an authentication error.

In my config I have admin/cisco as the web admin. 

telephony-service
 sdspfarm units 1
 sdspfarm transcode sessions 3
 sdspfarm tag 1 br2-xcoder
 no auto-reg-ephone
 em logout 7:0 19:0 23:0
 load 7960-7940 P00308000500
 load 7962 SCCP42.8-3-3S
 max-ephones 3
 max-dn 6 no-reg
 ip source-address 10.10.110.3 port 2000
 time-format 24
 date-format dd-mm-yy
 voicemail 3600
 max-conferences 8 gain -6
 call-forward pattern .T
 web admin system name admin password cisco
 dn-webedit
 transfer-system full-consult
 transfer-pattern .T
!
!
ip http server
ip http authentication local
no ip http secure-server
ip http path flash:/GUI

thanks,
Randall___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] Fw: CME/CUE

[Randall Crumm]

- Forwarded Message -
From: Randall Crumm 
To: Online Study 
Sent: Saturday, November 5, 2011 7:40 PM
Subject: CME/CUE 


HI,
I have a weird problem. When I try to run the wizard from the web gui, it is 
asking for web username and password.
I am putting in admin and cisco and I am getting an authentication error.

In my config I have admin/cisco as the web admin. 

telephony-service
 sdspfarm units 1
 sdspfarm transcode sessions 3
 sdspfarm tag 1 br2-xcoder
 no auto-reg-ephone
 em logout 7:0 19:0 23:0
 load 7960-7940 P00308000500
 load 7962 SCCP42.8-3-3S
 max-ephones 3
 max-dn 6 no-reg
 ip source-address 10.10.110.3 port 2000
 time-format 24
 date-format dd-mm-yy
 voicemail 3600
 max-conferences 8 gain -6
 call-forward pattern .T
 web admin system name admin password cisco
 dn-webedit
 transfer-system full-consult
 transfer-pattern .T
!
!
ip http server
ip http authentication local
no ip http secure-server
ip http path flash:/GUI

thanks,
Randall___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Why my outbound calls (using RGs) to pstn doesn't work?

[Randall Crumm]

If you are using SLRG check to make sure you have Standard Local RG in the RL and assigned the Local GW to the DPrandallFrom: Chris Martin To: Voiper Cc: Rrcrumm ; "ccie_voice@onlinestudylist.com" ; "kew...@gmail.com" Sent: Tuesday, November 15, 2011 12:11 PMSubject: Re: [OSL | CCIE_Voice] Why my outbound calls (using RGs) to pstn doesn't work?You said your using SLRG?  You did assign a route group to each device-pool and reset, correct?ChrisOn Tue, Nov 15, 2011 at 1:42 PM, Voiper  wrote:
Unfortunately, I am still stuck. I took two days off from work (Mon, Tue) to work on it and still  no success 
Will keep trying.
Thanks,VoiperOn Tue, Nov 15, 2011 at 2:35 PM, Rrcrumm  wrote:

We're u able to resolve your issue?Sent from my iPhoneOn Nov 15, 2011, at 10:32 AM, Voiper  wrote:

Hi Friends:Thank you all for you quick and helpful suggestions. It show you are all very focused and have the determination to get the coveted number. I need to step up my efforts after seeing how you all  quickly helped with feedback. 


All your help is truly appreciated.Voiper@RRCRUMM:Did you reset the h323 gw in cucm? Do you see an ip address towards the upper portion of the page above the name/ ip address field?


-> The h323 gw is configured and I see the ip addressoutbound calls to pstn using h323 or mcgp gw directly is working@Ashwani ash_r...@hotmail.com 

Did you bind source interface on HQ router for H323? And same interface's IP assigned on CUCM?  Also did you have incoming dial-peer from CUCM? Paste your HQ config here.
-> interface FastEthernet0/0.20 description VOICE encapsulation dot1Q 20 ip address 10.10.200.3 255.255.255.0 ip helper-address 10.10.210.10 h323-gateway voip bind srcaddr 10.10.200.3HQ router config is attached.


@Ken Wyan kew...@gmail.com    Pls check your route list  rl-test config & digit manipulations etc.. in rg-test (under rl-test).If you have done any digit manipulations in rg-test (under rl-test) , your RP digit-manipulations will not work


Add rg-test  as Local Route Group for Device PoolIn addition to debug isdn --->  debug ccapi inout , dialpeer  may help to isolate issue-> No digit manipulations on any of the above. I tried to keep it as simple as possible


ran above debug and nothing gets generated. @Pradeep Kumar Sharma sonu.netwo...@gmail.comVerify the registration status of your Route List.Try to reset it once.


Run the debug voice ccapi inout on H323 Gw and see if the outbound calls really hitting to the gateway on not ?-> route list status unknown. Reset many times. What is your registration status?CCAPI:  debug voip ccapi inout is ON (filter is OFF)


CCH323 SPI: H225 State Machine tracing is enabled (filter is OFF)-> above debug show nothing happening. Call just not reaching the h323 gw@Mohd Baqari baqari.voic...@gmail.com 


On you gateway, do the following:1. Debug cch323 h225 messages. Check if any h323 signaling is reaching the gateway.2. If signaling is received successfully, run the command debug voice dialpeer. Check which dial peer is matched and whats the configuration of it


3. If no h323 signaling is received, post cucm traces after making a call-> above debug show nothing happening. Call just not reaching the h323 gwDo I need to run RTMT for trace? I installed it on my desktop and ran trace 'Collect Files' (attached). First time using, so I don't know if I got the right one?






___
For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Why my outbound calls (using RGs) to pstn doesn't work?

[Randall Crumm]

If you are using SLRG check to make sure you have Standard Local RG in the RL and assigned the Local GW to the DPrandallFrom: Chris Martin To: Voiper Cc: Rrcrumm ; "ccie_voice@onlinestudylist.com" ; "kew...@gmail.com" Sent: Tuesday, November 15, 2011 12:11 PMSubject: Re: [OSL | CCIE_Voice] Why my outbound calls (using RGs) to pstn doesn't work?You said your using SLRG?  You did assign a route group to each device-pool and reset, correct?ChrisOn Tue, Nov 15, 2011 at 1:42 PM, Voiper  wrote:
Unfortunately, I am still stuck. I took two days off from work (Mon, Tue) to work on it and still  no success 
Will keep trying.
Thanks,VoiperOn Tue, Nov 15, 2011 at 2:35 PM, Rrcrumm  wrote:

We're u able to resolve your issue?Sent from my iPhoneOn Nov 15, 2011, at 10:32 AM, Voiper  wrote:

Hi Friends:Thank you all for you quick and helpful suggestions. It show you are all very focused and have the determination to get the coveted number. I need to step up my efforts after seeing how you all  quickly helped with feedback. 


All your help is truly appreciated.Voiper@RRCRUMM:Did you reset the h323 gw in cucm? Do you see an ip address towards the upper portion of the page above the name/ ip address field?


-> The h323 gw is configured and I see the ip addressoutbound calls to pstn using h323 or mcgp gw directly is working@Ashwani ash_r...@hotmail.com 

Did you bind source interface on HQ router for H323? And same interface's IP assigned on CUCM?  Also did you have incoming dial-peer from CUCM? Paste your HQ config here.
-> interface FastEthernet0/0.20 description VOICE encapsulation dot1Q 20 ip address 10.10.200.3 255.255.255.0 ip helper-address 10.10.210.10 h323-gateway voip bind srcaddr 10.10.200.3HQ router config is attached.


@Ken Wyan kew...@gmail.com    Pls check your route list  rl-test config & digit manipulations etc.. in rg-test (under rl-test).If you have done any digit manipulations in rg-test (under rl-test) , your RP digit-manipulations will not work


Add rg-test  as Local Route Group for Device PoolIn addition to debug isdn --->  debug ccapi inout , dialpeer  may help to isolate issue-> No digit manipulations on any of the above. I tried to keep it as simple as possible


ran above debug and nothing gets generated. @Pradeep Kumar Sharma sonu.netwo...@gmail.comVerify the registration status of your Route List.Try to reset it once.


Run the debug voice ccapi inout on H323 Gw and see if the outbound calls really hitting to the gateway on not ?-> route list status unknown. Reset many times. What is your registration status?CCAPI:  debug voip ccapi inout is ON (filter is OFF)


CCH323 SPI: H225 State Machine tracing is enabled (filter is OFF)-> above debug show nothing happening. Call just not reaching the h323 gw@Mohd Baqari baqari.voic...@gmail.com 


On you gateway, do the following:1. Debug cch323 h225 messages. Check if any h323 signaling is reaching the gateway.2. If signaling is received successfully, run the command debug voice dialpeer. Check which dial peer is matched and whats the configuration of it


3. If no h323 signaling is received, post cucm traces after making a call-> above debug show nothing happening. Call just not reaching the h323 gwDo I need to run RTMT for trace? I installed it on my desktop and ran trace 'Collect Files' (attached). First time using, so I don't know if I got the right one?






___
For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] QoS for Frame Relay

[Randall Crumm]

Is the setting set to mandatory under location in CUCM?

Randall




 From: datucha123 datucha123 
To: ccie_voice@onlinestudylist.com 
Sent: Sunday, November 20, 2011 8:29 AM
Subject: [OSL | CCIE_Voice] QoS for Frame Relay
 

 
hello, everyone.
 
I have several questions about the QoS:
 
1) As I know, the Frame Relay Fragment Size must be always calculated based on 
the Interfaces Access Rate? Am I right? And when using the Auto QoS on Frame 
Relay Subinteface, it will calculate the Framgent Size based on the "bandwidth" 
command under the Subinterface, and then we have to manually correct the 
Fragment Size, so that it will be based on the Access Rate and not on the 
Bandwidth of an interface, am I right?
 
2) When configuring the CUCM RSVP CAC, we have to configure the "ip 
rsvp bandwidth" command under the Frame Relay DLCI interface, and also 
configure the RSVP MTPs on the Routers. 
Each G729 call for RSVP is allocating 40 kbps, and for G711 96 kbps. 
But now look, I have an issue with the "ip rsvp bandwidth" command:
 
I have configured the "ip rsvp bandwidth 40" under the Frame Relay DLCI 
(Subinterface), so that I have to have only 1 G729 call, and all other calls 
should be rejected (Not reserved). 
But my routers are still reserving more and more bandwidth for subsequent 
calls. RSVP is not rejecting calls, even if I configure the "ip rsvp bandwidth 
10" command, the calls are still traversing and are not rejected. 
 
I have also added the following command:
 
ip rsvp policy preempt
 
interface Serial0/3/0.1 point-to-point
 frame-relay interface-dlci 101
  ip rsvp bandwidth 40
 ip rsvp data-packet classification none
 ip rsvp resource-provider none
 
But still not succes, even 5 G729 calls are reserved and not rejected. I cannot 
understand why is it so? The debugs of RSVP does not show anything interesing, 
they are just saying that the RSVP reservation has been succesfull for each 
call. 
Maybe it is an IOS BUG?

 
 
 
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] QoS for Frame Relay

[Randall Crumm]

Do you have the locations in your Device pool and the proper device pool 
assigned to the GW?

RC



 From: datucha123 datucha123 
To: Randall Crumm  
Cc: "ccie_voice@onlinestudylist.com"  
Sent: Sunday, November 20, 2011 10:00 AM
Subject: Re: [OSL | CCIE_Voice] QoS for Frame Relay
 

Yes, Sure, 
 
Mandatory (Video Desired)
 
But still no success :(


On Sun, Nov 20, 2011 at 9:58 PM, Randall Crumm  wrote:

Is the setting set to mandatory under location in CUCM?
>
>
>Randall
>
>
>
>
>
>
> From: datucha123 datucha123 
>To: ccie_voice@onlinestudylist.com 
>Sent: Sunday, November 20, 2011 8:29 AM
>Subject: [OSL | CCIE_Voice] QoS for Frame Relay
> 
>
>
> 
>hello, everyone.
> 
>I have several questions about the QoS:
> 
>1) As I know, the Frame Relay Fragment Size must be always calculated based on 
>the Interfaces Access Rate? Am I right? And when using the Auto QoS on Frame 
>Relay Subinteface, it will calculate the Framgent Size based on the 
>"bandwidth" command under the Subinterface, and then we have to manually 
>correct the Fragment Size, so that it will be based on the Access Rate and not 
>on the Bandwidth of an interface, am I right?
> 
>2) When configuring the CUCM RSVP CAC, we have to configure the "ip 
>rsvp bandwidth" command under the Frame Relay DLCI interface, and also 
>configure the RSVP MTPs on the Routers. 
>Each G729 call for RSVP is allocating 40 kbps, and for G711 96 kbps. 
>But now look, I have an issue with the "ip rsvp bandwidth" command:
> 
>I have configured the "ip rsvp bandwidth 40" under the Frame Relay DLCI 
>(Subinterface), so that I have to have only 1 G729 call, and all other calls 
>should be rejected (Not reserved). 
>But my routers are still reserving more and more bandwidth for subsequent 
>calls. RSVP is not rejecting calls, even if I configure the "ip rsvp bandwidth 
>10" command, the calls are still traversing and are not rejected. 
> 
>I have also added the following command:
> 
>ip rsvp policy preempt
> 
>interface Serial0/3/0.1 point-to-point
> frame-relay interface-dlci 101
>  ip rsvp bandwidth 40
> ip rsvp data-packet classification none
> ip rsvp resource-provider none
> 
>But still not succes, even 5 G729 calls are reserved and not rejected. I 
>cannot understand why is it so? The debugs of RSVP does not show anything 
>interesing, they are just saying that the RSVP reservation has been succesfull 
>for each call. 
>Maybe it is an IOS BUG?
>
> 
> 
> 
>___
>For more information regarding industry leading CCIE Lab training, please 
>visit www.ipexpert.com
>
>Are you a CCNP or CCIE and looking for a job? Check out 
>www.PlatinumPlacement.com
>
>___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] lab - 6

[Randall Crumm]

Thanks  Mark!


The real question is why is a question like this in the CCIE Voice lab in the 
first place.

Randall


From: Mark Reed 
To: Peter Jeff  
Cc: Ken Wyan ; "ccie_voice@onlinestudylist.com" 
 
Sent: Tuesday, November 22, 2011 3:22 AM
Subject: Re: [OSL | CCIE_Voice] lab - 6


The answer is in this document. 
 
http://www.cisco.com/en/US/docs/ios/ipaddr/configuration/guide/iad_dhcp_svr_cfg_ps6441_TSD_Products_Configuration_Guide_Chapter.html#wp1117976
 
I tried it last night in my lab.  Here is my config using the static 
instructions in that doc.
 
ip dhcp pool SCDHCP
   origin file flash:SCDHCP
   option 150 ip 142.100.64.12 142.100.64.11
   default-router 142.102.66.254

BR2-RTR# more flash:SCDHCP
*time* Nov 21 2011 07:52 AM
*version* 2
!IP address    Type    Hardware address Lease expiration
142.102.66.21 /24   id   0100.1B54.951C.D9   Infinite
142.102.66.22 /24   id  0100.1AA1.93E0.F5 Infinite
*end*


BR2-RTR#sh cdp nei det
Device ID: SEP001B54951CD9
Entry address(es):
  IP address: 142.102.66.21
...
Device ID: SEP001AA193E0F5
Entry address(es):
  IP address: 142.102.66.22

 
I created the SCDHCP doc in notepad.  Uploaded it to CUCM, then TFTPed it to my 
router.  Once the file is in flash the since dhcp pool looks up the static IPs 
in the file then assigns it to the appropriate phone.

On Mon, Nov 21, 2011 at 2:14 PM, Peter Jeff  wrote:
The real question is why is a question like this in the CCIE From: Mark Reed 
To: Peter Jeff  
Cc: Ken Wyan ; "ccie_voice@onlinestudylist.com" 
 
Sent: Tuesday, November 22, 2011 3:22 AM
Subject: Re: [OSL | CCIE_Voice] lab - 6


The answer is in this document. 
 
http://www.cisco.com/en/US/docs/ios/ipaddr/configuration/guide/iad_dhcp_svr_cfg_ps6441_TSD_Products_Configuration_Guide_Chapter.html#wp1117976
 
I tried it last night in my lab.  Here is my config using the static 
instructions in that doc.
 
ip dhcp pool SCDHCP
   origin file flash:SCDHCP
   option 150 ip 142.100.64.12 142.100.64.11
   default-router 142.102.66.254

BR2-RTR# more flash:SCDHCP
*time* Nov 21 2011 07:52 AM
*version* 2
!IP address    Type    Hardware address Lease expiration
142.102.66.21 /24   id   0100.1B54.951C.D9   Infinite
142.102.66.22 /24   id  0100.1AA1.93E0.F5 Infinite
*end*


BR2-RTR#sh cdp nei det
Device ID: SEP001B54951CD9
Entry address(es):
  IP address: 142.102.66.21
...
Device ID: SEP001AA193E0F5
Entry address(es):
  IP address: 142.102.66.22

 
I created the SCDHCP doc in notepad.  Uploaded it to CUCM, then TFTPed it to my 
router.  Once the file is in flash the since dhcp pool looks up the static IPs 
in the file then assigns it to the appropriate phone.

On Mon, Nov 21, 2011 at 2:14 PM, Peter 
Jeff  wrote:oice lab exam in the first place.

Randall




 From: Peter Jeff 
To: Mark Reed  
Cc: "ccie_voice@onlinestudylist.com" ; Ken Wyan 
 
Sent: Monday, November 21, 2011 2:22 PM
Subject: Re: [OSL | CCIE_Voice] lab - 6
 

thanks marks easy one



 From: Mark Reed 
To: Peter Jeff  
Cc: Ken Wyan ; "ccie_voice@onlinestudylist.com" 
 
Sent: Tuesday, November 22, 2011 3:22 AM
Subject: Re: [OSL | CCIE_Voice] lab - 6
 

The answer is in this document. 
 
http://www.cisco.com/en/US/docs/ios/ipaddr/configuration/guide/iad_dhcp_svr_cfg_ps6441_TSD_Products_Configuration_Guide_Chapter.html#wp1117976
 
I tried it last night in my lab.  Here is my config using the static 
instructions in that doc.
 
ip dhcp pool SCDHCP
   origin file flash:SCDHCP
   option 150 ip 142.100.64.12 142.100.64.11
   default-router 142.102.66.254

BR2-RTR# more flash:SCDHCP
*time* Nov 21 2011 07:52 AM
*version* 2
!IP address    Type    Hardware address Lease expiration
142.102.66.21 /24   id   0100.1B54.951C.D9   Infinite
142.102.66.22 /24   id  0100.1AA1.93E0.F5 Infinite
*end*


BR2-RTR#sh cdp nei det
Device ID: SEP001B54951CD9
Entry address(es):
  IP address: 142.102.66.21
...
Device ID: SEP001AA193E0F5
Entry address(es):
  IP address: 142.102.66.22

 
I created the SCDHCP doc in notepad.  Uploaded it to CUCM, then TFTPed it to my 
router.  Once the file is in flash the since dhcp pool looks up the static IPs 
in the file then assigns it to the appropriate phone.

On Mon, Nov 21, 2011 at 2:14 PM, Peter Jeff  wrote:

Question is 100% correct 
> 
>it can be manually or static end result is important
>
>
>From: Ken Wyan 
>To: "ccie_voice@onlinestudylist.com"  
>Sent: Monday, November 21, 2011 1:11 PM
>
>Subject: Re: [OSL | CCIE_Voice] lab - 6
>
>
>
>You can't provide 2 static ip addresses using a single dhcp pool on a cisco 
>router
> 
>Either you have misunderstood or a typo in exam.
>
>
> 
>On Mon, Nov 21, 2011 at 5:18 AM, Abel ...  wrote:
>
>Well, the DHCP issue can be done easy if you look 5 minutes on cisco.com 
>documentation, by Early offer what you mean? no interdigit timeout? 
>>
>>
>>
>>On Sun, Nov 20, 2011 at 2:22 PM, datucha123 datucha123  
>>wrote:
>>
>>Do you mean under the D