[OSL | CCIE_Voice] CME- Can not call Vocie Hunt Group Pilot from PSTN Phone
Folks, CME- Can not call Vocie Hunt Group Pilot from PSTN Phone, get Fast busy and ISDN message unallocated/ unassingned number, I can call from another CME phone though. I see the call hitting the CME Thanks for your help AB ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] CME- Can not call Vocie Hunt Group Pilot from PSTN Phone
My bad, was a type in translation rule. thanks for your willingness to help please... On Fri, Nov 26, 2010 at 5:24 PM, Matthew Berry matthew.be...@cdw.comwrote: Can you send your configs? It's hard to troubleshoot without anything to work with. Thanks! Matthew Berry On Nov 26, 2010, at 7:22 PM, vccie2010 wrote: Folks, CME- Can not call Vocie Hunt Group Pilot from PSTN Phone, get Fast busy and ISDN message unallocated/ unassingned number, I can call from another CME phone though. I see the call hitting the CME Thanks for your help AB ATT1..txt ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] unable to register IP Communicator to CME
I do have CIPC ver 7.0.3.0 please... On Thu, May 6, 2010 at 8:03 PM, vccie2010 vccie2...@gmail.com wrote: Tried with no-auto-reg too but no luck... Hope it is clear (:- here is my config... telephony-service no auto-reg-ephone max-ephones 2 max-dn 4 ip source-address 10.10.202.1 port 2000 max-conferences 8 gain -6 transfer-system full-consult create cnf-files version-stamp 7960 May 07 2010 09:00:40 ! ! ephone-dn 1 dual-line number 3001 no-reg both ! ! ephone-dn 2 dual-line number 3002 no-reg both ! ! ephone 1 device-security-mode none mac-address 0021.5C74.216F type 7960 button 1:1 ! ! ! ephone 2 device-security-mode none mac-address 00FF.0043.428A type CIPC button 1:2 ! On Thu, May 6, 2010 at 6:53 PM, Roger Henderson rhender...@gmail.comwrote: Add no auto-reg-ephone to your telephony-service section. Roger On Fri, May 7, 2010 at 10:00 AM, vccie2010 vccie2...@gmail.com wrote: IP Communicator show as sh ephone output : ephone-2[1] Mac:F004.3428.A TCP socket:[4] activeLine:0 REGISTERED in SCCP ver 15/9 mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:10 IP:10.10.0.43 2724 CIPC keepalive 0 max_line 8 Preferred Codec: g711ulaw I had the eph 3 already configured as below but somehow it show aboe eh 2 auto configured ??? telephony-service load 7960-7940 P00308000500 max-ephones 2 max-dn 2 ip source-address 10.10.202.1 port 2000 dialplan-pattern 1 33132143... extension-length 4 voicemail 3600 max-conferences 8 gain -6 transfer-system full-consult server-security-mode non-secure create cnf-files version-stamp 7960 May 07 2010 05:37:49 ! ! ephone-dn 1 dual-line number 3001 no-reg both ! ! ephone-dn 2 dual-line number 3002 no-reg both ! ! ephone 1 device-security-mode none mac-address 0021.5C74.216F type 7960 button 1:1 ! ! ! ephone 3CIPC configured manually device-security-mode none mac-address 00FF.0043.428A type CIPC button 1:2 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] No More OEQs on RS and Voice Lab Exams
I don't see it on ccie lab info,can you share the link please... On Thu, May 6, 2010 at 8:53 AM, Marko Milivojevic mar...@ipexpert.comwrote: Hello everyone, Yes, this is correct. Open Ended Questions are NO MORE starting Monday. These are good news - not that they are such a huge problem, but because you DO get 30 more minutes for stuff that matters! -- Marko Milivojevic - CCIE #18427 Senior Technical Instructor - IPexpert YES! We include 400 hours of REAL rack time with our Blended Learning Solution! Mailto: mar...@ipexpert.com Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Web: http://www.ipexpert.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] No More OEQs on RS and Voice Lab Exams
Perfect, that makes sens... On Thu, May 6, 2010 at 9:10 AM, Wayne Lawson groupst...@ipexpert.comwrote: There's no link. It's being discussed on a CCIE-focsed call right now. I'm sure that Cisco will update their site shortly. Regards, Wayne A. Lawson II - CCIE #5244 (RS) Founder, President CEO - IPexpert, Inc., Proctor Labs, Inc. Platinum Solutions Group, LLC. Mailto: wlaw...@ipexpert.com Telephone: +1.810.334.1564 eFax: +1.810.454.0130 ::Message sent from iPhone:: IPexpert Proctor Labs are premier providers of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (RS, Voice, Security Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities and our public website at www.ipexpert.com or www.proctorlabs.com. Platinum Solutions Group (PSG) provides high-end consulting services with a primary emphasis on Cisco's Data Center Solutions, Service Provider Solutions, Unified Communications and Security-enabled infrastructures. Be sure to visit www.platinumsolutionsgroup.com. On May 6, 2010, at 12:09 PM, vccie2010 vccie2...@gmail.com wrote: I don't see it on ccie lab info,can you share the link please... On Thu, May 6, 2010 at 8:53 AM, Marko Milivojevic mar...@ipexpert.comwrote: Hello everyone, Yes, this is correct. Open Ended Questions are NO MORE starting Monday. These are good news - not that they are such a huge problem, but because you DO get 30 more minutes for stuff that matters! -- Marko Milivojevic - CCIE #18427 Senior Technical Instructor - IPexpert YES! We include 400 hours of REAL rack time with our Blended Learning Solution! Mailto: mar...@ipexpert.com Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Web: http://www.ipexpert.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Vol 2 Lab 1 - ISDN Restart Errors
cause 0x22 - generaly means no channel availableplease checj you have right number of slots defined in pri-group timeslots statement and double check your PSTN router for same. On Thu, May 6, 2010 at 12:26 PM, Steve Denney (stdenney) stden...@cisco.com wrote: Hi, Seeing some errors today that I haven’t encountered before in any other lab...wh! :) I’m working on Vol 2 Lab 1 Question 4.1, and trying to get calls from the PSTN working into HQ. Pretty straightforward stuff, except the calls never seem to get out of the PSTN router. When dialing the HQ phone from the PSTN phone (regardless of line selected), I get the following debug isdn q931 errors from the PSTN router: May 6 23:11:09.243: ISDN Se0/3/0:23 Q931: Applying typeplan for sw-type 0xD is 0x0 0x0, Calling num 911 May 6 23:11:09.243: ISDN Se0/3/0:23 **ERROR**: CCPMSG_OutCall: fails with cause 0x22 And every 30 seconds, I see the same batch of 4 ISDN Restart messages, like this (also from the PSTN router): May 6 23:12:04.539: ISDN Se0/3/0:23 Q931: TX - RESTART pd = 8 callref = 0x Restart Indicator i = 0x87 May 6 23:12:05.539: ISDN Se0/3/0:23 Q931: TX - RESTART pd = 8 callref = 0x Restart Indicator i = 0x87 May 6 23:12:06.539: ISDN Se0/3/0:23 Q931: TX - RESTART pd = 8 callref = 0x Restart Indicator i = 0x87 May 6 23:12:07.539: ISDN Se0/3/0:23 Q931: TX - RESTART pd = 8 callref = 0x Restart Indicator i = 0x87 Show isdn status on the PSTN router looks normal for this interface: ISDN Serial0/3/0:23 interface *** Network side configuration *** dsl 1, interface ISDN Switchtype = primary-ni Layer 1 Status: ACTIVE Layer 2 Status: TEI = 0, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED Layer 3 Status: 0 Active Layer 3 Call(s) Active dsl 1 CCBs = 0 The Free Channel Mask: 0x8000 Number of L2 Discards = 0, L2 Session ID = 0 Attaching show run and show isdn status as well for the HQ router (the other end) just for troubleshooting completeness, but there’s no indication of anything amiss, nor any debug messages at all, on the HQ router. The call never gets that far. I started this morning on Voice Pod 11 and hit this. Ryan was kind enough to move me over to Voice Pod 16, but I’m hitting the same issue here. OSL archive and Google search turned up nothing concrete, other than a general theme of “it sounds like your telco / carrier has issues.” :) Any ideas? Cheers and TIA, sd ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] Lab 5c MVA
When I call from PSTN into the MVA number and enter the RDP no it does not like it, it seems DTMF are not being passed from PSTN into my h323GW, how can I validate that, tried deb voice ccapi inout but can't see in there...But when I call from Br1 phone via PSTN into the MVA number it does accept the RD number ??? any thoughts please ??? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] unable to register IP Communicator to CME
IP Communicator show as sh ephone output : ephone-2[1] Mac:F004.3428.A TCP socket:[4] activeLine:0 REGISTERED in SCCP ver 15/9 mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:10 IP:10.10.0.43 2724 CIPC keepalive 0 max_line 8 Preferred Codec: g711ulaw I had the eph 3 already configured as below but somehow it show aboe eh 2 auto configured ??? telephony-service load 7960-7940 P00308000500 max-ephones 2 max-dn 2 ip source-address 10.10.202.1 port 2000 dialplan-pattern 1 33132143... extension-length 4 voicemail 3600 max-conferences 8 gain -6 transfer-system full-consult server-security-mode non-secure create cnf-files version-stamp 7960 May 07 2010 05:37:49 ! ! ephone-dn 1 dual-line number 3001 no-reg both ! ! ephone-dn 2 dual-line number 3002 no-reg both ! ! ephone 1 device-security-mode none mac-address 0021.5C74.216F type 7960 button 1:1 ! ! ! ephone 3CIPC configured manually device-security-mode none mac-address 00FF.0043.428A type CIPC button 1:2 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Music on hold on h323
Will appreciate if you may please give ur to cents on what was the issue for the benefit... On Thu, May 6, 2010 at 5:25 PM, Omotayo adefilabi...@gmail.com wrote: Hello, I have br1 registered as h323 gateway with music hold configured the MOH is assigned to br1 phones When br1 phone put pstn phone on hold the multicast is used but i dont hear the music Anyone with an idea of what th eissue might be Perf class (Cisco MOH Device) has instances and values: MOH_2 - MOHHighestActiveResources = 1 MOH_2 - MOHMulticastResourceActive = 1 MOH_2 - MOHMulticastResourceAvailable = 24 MOH_2 - MOHOutOfResources = 0 MOH_2 - MOHTotalMulticastResources = 25 MOH_2 - MOHTotalUnicastResources = 250 MOH_2 - MOHUnicastResourceActive = 0 MOH_2 - MOHUnicastResourceAvailable= 250 MOH_3 - MOHHighestActiveResources = 1 MOH_3 - MOHMulticastResourceActive = 0 MOH_3 - MOHMulticastResourceAvailable = 25 MOH_3 - MOHOutOfResources = 0 MOH_3 - MOHTotalMulticastResources = 25 MOH_3 - MOHTotalUnicastResources = 250 MOH_3 - MOHUnicastResourceActive = 0 MOH_3 - MOHUnicastResourceAvailable= 250 thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Lab 5c MVA
I beleive my requests are not getting posted on the list please ??? On Thu, May 6, 2010 at 4:20 PM, vccie2010 vccie2...@gmail.com wrote: When I call from PSTN into the MVA number and enter the RDP no it does not like it, it seems DTMF are not being passed from PSTN into my h323GW, how can I validate that, tried deb voice ccapi inout but can't see in there...But when I call from Br1 phone via PSTN into the MVA number it does accept the RD number ??? any thoughts please ??? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] unable to register IP Communicator to CME
Tried with no-auto-reg too but no luck... Hope it is clear (:- here is my config... telephony-service no auto-reg-ephone max-ephones 2 max-dn 4 ip source-address 10.10.202.1 port 2000 max-conferences 8 gain -6 transfer-system full-consult create cnf-files version-stamp 7960 May 07 2010 09:00:40 ! ! ephone-dn 1 dual-line number 3001 no-reg both ! ! ephone-dn 2 dual-line number 3002 no-reg both ! ! ephone 1 device-security-mode none mac-address 0021.5C74.216F type 7960 button 1:1 ! ! ! ephone 2 device-security-mode none mac-address 00FF.0043.428A type CIPC button 1:2 ! On Thu, May 6, 2010 at 6:53 PM, Roger Henderson rhender...@gmail.comwrote: Add no auto-reg-ephone to your telephony-service section. Roger On Fri, May 7, 2010 at 10:00 AM, vccie2010 vccie2...@gmail.com wrote: IP Communicator show as sh ephone output : ephone-2[1] Mac:F004.3428.A TCP socket:[4] activeLine:0 REGISTERED in SCCP ver 15/9 mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:10 IP:10.10.0.43 2724 CIPC keepalive 0 max_line 8 Preferred Codec: g711ulaw I had the eph 3 already configured as below but somehow it show aboe eh 2 auto configured ??? telephony-service load 7960-7940 P00308000500 max-ephones 2 max-dn 2 ip source-address 10.10.202.1 port 2000 dialplan-pattern 1 33132143... extension-length 4 voicemail 3600 max-conferences 8 gain -6 transfer-system full-consult server-security-mode non-secure create cnf-files version-stamp 7960 May 07 2010 05:37:49 ! ! ephone-dn 1 dual-line number 3001 no-reg both ! ! ephone-dn 2 dual-line number 3002 no-reg both ! ! ephone 1 device-security-mode none mac-address 0021.5C74.216F type 7960 button 1:1 ! ! ! ephone 3CIPC configured manually device-security-mode none mac-address 00FF.0043.428A type CIPC button 1:2 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] Lab5c - 91 calls to Remote Zone
I am wondering in a scenario, if I am not allowed to use gw-type-prefix 1#* default-technology on HQ GK and I don't know the Remote PSTN zone Tech-prefix, how can I make my calls to India (91 country code calls) pass on to Remote zone PSTN GK, any thoughts please ? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] GK remote zone
I am wondering in a scenario, if I am not allowed to use gw-type-prefix 1#* default-technology on HQ GK and I don't know the Remote PSTN zone Tech-prefix, how can I make my calls to India (91 country code calls) pass on to Remote zone PSTN GK, any thoughts please ? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] c
http://proctorlabs.com/ is not openingis it down pls ?? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] Is proctorlabs.com web site down....I am not able to get to home page
http://proctorlabs.com/ is not openingis it down pls ?? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] lab 3 Q 2.8
Calls to India 91* are failing with attached debugs and following configs. I have configured tha GK and CCM per the solution : on GK - gatekeeper zone local UCM ipexpert.com zone remote PSTN-WAN ipexpert.com 10.10.100.2 1719 zone prefix PSTN-WAN 91* no shutdown ON CCM I have RP pointing to RL-GK which has gk-trunk, I see calls coming into GK but it fails there with attached logs, I also checked on PSTN the following configI don;'t see any entery in PSTN Gk for UCM zone , any clues please gatekeeper zone local PSTN-WAN ipexpert.com 10.10.100.2 zone remote HQ-RTR ipexpert.com 10.10.200.3 1719 zone remote US ipexpert.com 10.10.110.1 1719 zone prefix PSTN-WAN 34* zone prefix PSTN-WAN 91* gw-type-prefix 1#* default-technology no shutdown I also tried changing Zone name on HQ GK as US but still no luck... ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Is proctorlabs.com web site down....I am not able to get to home page
Thanks Wayne, it came back up pls... On Wed, May 5, 2010 at 3:48 PM, Wayne Lawson groupst...@ipexpert.comwrote: We're looking into it right now. Regards, Wayne A. Lawson II - CCIE #5244 (RS) Founder, President CEO - IPexpert, Inc., Proctor Labs, Inc. Platinum Solutions Group, LLC. Mailto: wlaw...@ipexpert.com Telephone: +1.810.334.1564 eFax: +1.810.454.0130 ::Message sent from iPhone:: IPexpert Proctor Labs are premier providers of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (RS, Voice, Security Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities and our public website at www.ipexpert.com or www.proctorlabs.com. Platinum Solutions Group (PSG) provides high-end consulting services with a primary emphasis on Cisco's Data Center Solutions, Service Provider Solutions, Unified Communications and Security-enabled infrastructures. Be sure to visit www.platinumsolutionsgroup.com. On May 5, 2010, at 6:31 PM, vccie2010 vccie2...@gmail.com wrote: http://proctorlabs.com/ is not openingis it down pls ?? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] lab 3 Q 2.8
On Wed, May 5, 2010 at 3:58 PM, vccie2010 vccie2...@gmail.com wrote: Calls to India 91* are failing with attached debugs and following configs. I have configured tha GK and CCM per the solution : on GK - gatekeeper zone local UCM ipexpert.com zone remote PSTN-WAN ipexpert.com 10.10.100.2 1719 zone prefix PSTN-WAN 91* no shutdown ON CCM I have RP pointing to RL-GK which has gk-trunk, I see calls coming into GK but it fails there with attached logs, I also checked on PSTN the following configI don;'t see any entery in PSTN Gk for UCM zone , any clues please gatekeeper zone local PSTN-WAN ipexpert.com 10.10.100.2 zone remote HQ-RTR ipexpert.com 10.10.200.3 1719 zone remote US ipexpert.com 10.10.110.1 1719 zone prefix PSTN-WAN 34* zone prefix PSTN-WAN 91* gw-type-prefix 1#* default-technology no shutdown I also tried changing Zone name on HQ GK as US but still no luck... zone Description: Binary data ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] lab 3 Q 2.8
On Wed, May 5, 2010 at 4:07 PM, vccie2010 vccie2...@gmail.com wrote: On Wed, May 5, 2010 at 3:58 PM, vccie2010 vccie2...@gmail.com wrote: Calls to India 91* are failing with attached debugs and following configs. I have configured tha GK and CCM per the solution : on GK - gatekeeper zone local UCM ipexpert.com zone remote PSTN-WAN ipexpert.com 10.10.100.2 1719 zone prefix PSTN-WAN 91* no shutdown ON CCM I have RP pointing to RL-GK which has gk-trunk, I see calls coming into GK but it fails there with attached logs, I also checked on PSTN the following configI don;'t see any entery in PSTN Gk for UCM zone , any clues please gatekeeper zone local PSTN-WAN ipexpert.com 10.10.100.2 zone remote HQ-RTR ipexpert.com 10.10.200.3 1719 zone remote US ipexpert.com 10.10.110.1 1719 zone prefix PSTN-WAN 34* zone prefix PSTN-WAN 91* gw-type-prefix 1#* default-technology no shutdown I also tried changing Zone name on HQ GK as US but still no luck... zone Description: Binary data ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] lab 3 Q 2.8
This time with Zone name as US deb gatek main 10 and deb h225 asn1and configs On Wed, May 5, 2010 at 4:16 PM, Vik Malhi vma...@ipexpert.com wrote: Make the call again and send the output of *debug gatekeeper main 10 *and *debug gatekeeper call 10 *and also *debug ras* (all 3 cmds running at the same time). -- Vik Malhi – CCIE #13890 Instructor - IPexpert, Inc. Mailto: *vma...@ipexpert.com *Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Live Assistance, Please visit: www.ipexpert.com/chat * http://www.ipexpert.com/chat* IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (RS, Voice, Security Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities *http://www.ipexpert.com/communities* and our public website at www.ipexpert.com *http://www.ipexpert.com/* -- *From: *vccie2010 vccie2...@gmail.com *Date: *Wed, 5 May 2010 16:07:26 -0700 *To: *OSL Group ccie_voice@onlinestudylist.com *Subject: *Re: [OSL | CCIE_Voice] lab 3 Q 2.8 On Wed, May 5, 2010 at 3:58 PM, vccie2010 vccie2...@gmail.com wrote: Calls to India 91* are failing with attached debugs and following configs. I have configured tha GK and CCM per the solution : on GK - gatekeeper zone local UCM ipexpert.com http://ipexpert.com/ zone remote PSTN-WAN ipexpert.com http://ipexpert.com/ 10.10.100.2 1719 zone prefix PSTN-WAN 91* no shutdown ON CCM I have RP pointing to RL-GK which has gk-trunk, I see calls coming into GK but it fails there with attached logs, I also checked on PSTN the following configI don;'t see any entery in PSTN Gk for UCM zone , any clues please gatekeeper zone local PSTN-WAN ipexpert.com http://ipexpert.com/ 10.10.100.2 zone remote HQ-RTR ipexpert.com http://ipexpert.com/ 10.10.200.3 1719 zone remote US ipexpert.com http://ipexpert.com/ 10.10.110.1 1719 zone prefix PSTN-WAN 34* zone prefix PSTN-WAN 91* gw-type-prefix 1#* default-technology no shutdown I also tried changing Zone name on HQ GK as US but still no luck... -- ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com zone Description: Binary data ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] lab 3 Q 2.8
Here we go again Vik Zone name - UCM and all deugs u mentioned On Wed, May 5, 2010 at 4:16 PM, Vik Malhi vma...@ipexpert.com wrote: Make the call again and send the output of *debug gatekeeper main 10 *and *debug gatekeeper call 10 *and also *debug ras* (all 3 cmds running at the same time). -- Vik Malhi – CCIE #13890 Instructor - IPexpert, Inc. Mailto: *vma...@ipexpert.com *Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Live Assistance, Please visit: www.ipexpert.com/chat * http://www.ipexpert.com/chat* IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (RS, Voice, Security Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities *http://www.ipexpert.com/communities* and our public website at www.ipexpert.com *http://www.ipexpert.com/* -- *From: *vccie2010 vccie2...@gmail.com *Date: *Wed, 5 May 2010 16:07:26 -0700 *To: *OSL Group ccie_voice@onlinestudylist.com *Subject: *Re: [OSL | CCIE_Voice] lab 3 Q 2.8 On Wed, May 5, 2010 at 3:58 PM, vccie2010 vccie2...@gmail.com wrote: Calls to India 91* are failing with attached debugs and following configs. I have configured tha GK and CCM per the solution : on GK - gatekeeper zone local UCM ipexpert.com http://ipexpert.com/ zone remote PSTN-WAN ipexpert.com http://ipexpert.com/ 10.10.100.2 1719 zone prefix PSTN-WAN 91* no shutdown ON CCM I have RP pointing to RL-GK which has gk-trunk, I see calls coming into GK but it fails there with attached logs, I also checked on PSTN the following configI don;'t see any entery in PSTN Gk for UCM zone , any clues please gatekeeper zone local PSTN-WAN ipexpert.com http://ipexpert.com/ 10.10.100.2 zone remote HQ-RTR ipexpert.com http://ipexpert.com/ 10.10.200.3 1719 zone remote US ipexpert.com http://ipexpert.com/ 10.10.110.1 1719 zone prefix PSTN-WAN 34* zone prefix PSTN-WAN 91* gw-type-prefix 1#* default-technology no shutdown I also tried changing Zone name on HQ GK as US but still no luck... -- ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com zone Description: Binary data ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] lab 3 Q 2.8
POD 11 please... On Wed, May 5, 2010 at 4:29 PM, Vik Malhi vma...@ipexpert.com wrote: May 5 23:10:34.823: RecvUDP_IPSockData successfully rcvd message of length 116 from 10.10.100.2:1719 May 5 23:10:34.827: LCF (seq# 2052) rcvd Since you are receiving LCF from the GK, the remote GK is working fine. The problem is when the UCM is sending a SETUP message to the PSTN gateway. Nothing to do with GK. What pod are you? -- Vik Malhi – CCIE #13890 Instructor - IPexpert, Inc. Mailto: *vma...@ipexpert.com *Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Live Assistance, Please visit: www.ipexpert.com/chat * http://www.ipexpert.com/chat* IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (RS, Voice, Security Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities *http://www.ipexpert.com/communities* and our public website at www.ipexpert.com *http://www.ipexpert.com/* -- *From: *vccie2010 vccie2...@gmail.com *Date: *Wed, 5 May 2010 16:21:19 -0700 *To: *Vik Malhi vma...@ipexpert.com *Cc: *OSL Group ccie_voice@onlinestudylist.com *Subject: *Re: [OSL | CCIE_Voice] lab 3 Q 2.8 This time with Zone name as US deb gatek main 10 and deb h225 asn1and configs On Wed, May 5, 2010 at 4:16 PM, Vik Malhi vma...@ipexpert.com wrote: Make the call again and send the output of *debug gatekeeper main 10 *and *debug gatekeeper call 10 *and also *debug ras* (all 3 cmds running at the same time). -- Vik Malhi – CCIE #13890 Instructor - IPexpert, Inc. Mailto: *vma...@ipexpert.com http://vma...@ipexpert.com * Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Live Assistance, Please visit: www.ipexpert.com/chat http://www.ipexpert.com/chat *http://www.ipexpert.com/chat* IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (RS, Voice, Security Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities http://www.ipexpert.com/communities * http://www.ipexpert.com/communities* and our public website at www.ipexpert.com http://www.ipexpert.com/ *http://www.ipexpert.com/ http://www.ipexpert.com/ * -- *From: *vccie2010 vccie2...@gmail.com http://vccie2...@gmail.com *Date: *Wed, 5 May 2010 16:07:26 -0700 *To: *OSL Group ccie_voice@onlinestudylist.com http://ccie_voice@onlinestudylist.com *Subject: *Re: [OSL | CCIE_Voice] lab 3 Q 2.8 On Wed, May 5, 2010 at 3:58 PM, vccie2010 vccie2...@gmail.com http://vccie2...@gmail.com wrote: Calls to India 91* are failing with attached debugs and following configs. I have configured tha GK and CCM per the solution : on GK - gatekeeper zone local UCM ipexpert.com http://ipexpert.com/ http://ipexpert.com/ zone remote PSTN-WAN ipexpert.com http://ipexpert.com/ http://ipexpert.com/ 10.10.100.2 1719 zone prefix PSTN-WAN 91* no shutdown ON CCM I have RP pointing to RL-GK which has gk-trunk, I see calls coming into GK but it fails there with attached logs, I also checked on PSTN the following configI don;'t see any entery in PSTN Gk for UCM zone , any clues please gatekeeper zone local PSTN-WAN ipexpert.com http://ipexpert.com/ http://ipexpert.com/ 10.10.100.2 zone remote HQ-RTR ipexpert.com http://ipexpert.com/ http://ipexpert.com/ 10.10.200.3 1719 zone remote US ipexpert.com http://ipexpert.com/ http://ipexpert.com/ 10.10.110.1 1719 zone prefix PSTN-WAN 34* zone prefix PSTN-WAN 91* gw-type-prefix 1#* default-technology no shutdown I also tried changing Zone name on HQ GK as US but still no luck... -- ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com http://www.ipexpert.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] lab 3 Q 2.8
That helps a lot Vik. Appreciate your timely help Sir !!! On Wed, May 5, 2010 at 4:45 PM, Vik Malhi vma...@ipexpert.com wrote: We have the PSTN gatekeeper set up correctly as shown in the output below. There is no PSTN phone registered. The India line is on the PSTN phone. Get an IP Blue client registered to the PSTN-WAN router- you can enter the MAC address of your IP Blue / 79XX phone on proctorlabs.com and this will add register a PSTN phone after which the call to India will work. PSTN-WAN#sh gatek gw GATEWAY TYPE PREFIX TABLE = Prefix: 1#*(Default gateway-technology) Zone PSTN-WAN master gateway list: 10.10.100.2:1720 pstn-gw PSTN-WAN#sh gatek zone prefix ZONE PREFIX TABLE = GK-NAME E164-PREFIX --- --- PSTN-WAN 34* PSTN-WAN 91* *PSTN-WAN#sh ephon reg No ephone in specified type/condition. *-- Vik Malhi – CCIE #13890 Instructor - IPexpert, Inc. Mailto: *vma...@ipexpert.com *Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Live Assistance, Please visit: www.ipexpert.com/chat * http://www.ipexpert.com/chat* IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (RS, Voice, Security Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities *http://www.ipexpert.com/communities* and our public website at www.ipexpert.com *http://www.ipexpert.com/* -- *From: *vccie2010 vccie2...@gmail.com *Date: *Wed, 5 May 2010 16:30:58 -0700 *To: *Vik Malhi vma...@ipexpert.com *Cc: *OSL Group ccie_voice@onlinestudylist.com *Subject: *Re: [OSL | CCIE_Voice] lab 3 Q 2.8 POD 11 please... On Wed, May 5, 2010 at 4:29 PM, Vik Malhi vma...@ipexpert.com wrote: May 5 23:10:34.823: RecvUDP_IPSockData successfully rcvd message of length 116 from 10.10.100.2:1719 http://10.10.100.2:1719/ May 5 23:10:34.827: LCF (seq# 2052) rcvd Since you are receiving LCF from the GK, the remote GK is working fine. The problem is when the UCM is sending a SETUP message to the PSTN gateway. Nothing to do with GK. What pod are you? -- Vik Malhi – CCIE #13890 Instructor - IPexpert, Inc. Mailto: *vma...@ipexpert.com http://vma...@ipexpert.com *Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Live Assistance, Please visit: www.ipexpert.com/chat http://www.ipexpert.com/chat *http://www.ipexpert.com/chat* IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (RS, Voice, Security Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities http://www.ipexpert.com/communities * http://www.ipexpert.com/communities* and our public website at www.ipexpert.com http://www.ipexpert.com/ *http://www.ipexpert.com/ http://www.ipexpert.com/ * -- *From: *vccie2010 vccie2...@gmail.com http://vccie2...@gmail.com *Date: *Wed, 5 May 2010 16:21:19 -0700 *To: *Vik Malhi vma...@ipexpert.com http://vma...@ipexpert.com *Cc: *OSL Group ccie_voice@onlinestudylist.com http://ccie_voice@onlinestudylist.com *Subject: *Re: [OSL | CCIE_Voice] lab 3 Q 2.8 This time with Zone name as US deb gatek main 10 and deb h225 asn1and configs On Wed, May 5, 2010 at 4:16 PM, Vik Malhi vma...@ipexpert.com http://vma...@ipexpert.com wrote: Make the call again and send the output of *debug gatekeeper main 10 *and *debug gatekeeper call 10 *and also *debug ras* (all 3 cmds running at the same time). -- Vik Malhi – CCIE #13890 Instructor - IPexpert, Inc. Mailto: *vma...@ipexpert.com http://vma...@ipexpert.com http://vma...@ipexpert.com * Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Live Assistance, Please visit: www.ipexpert.com/chat http://www.ipexpert.com/chat http://www.ipexpert.com/chat * http://www.ipexpert.com/chat* IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (RS, Voice, Security Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities http://www.ipexpert.com/communities http://www.ipexpert.com/communities * http://www.ipexpert.com/communities* and our public website at www.ipexpert.com http://www.ipexpert.com/ http://www.ipexpert.com/ *http://www.ipexpert.com/ http://www.ipexpert.com/ * -- *From: *vccie2010 vccie2
Re: [OSL | CCIE_Voice] Proctorlabs seems to have gone down
Yeah, same here Roger. On Wed, May 5, 2010 at 8:40 PM, Roger Henderson rhender...@gmail.comwrote: Hey All, Is anyone else having trouble with Proctorlabs? My session just dropped out and I can't contact the website to seek assistance or connect via VPN. Roger ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] ephone-dn singlevs dual line features available
Perfect, thx Angel !!! On Mon, May 3, 2010 at 1:03 AM, Angel Perez gorr...@hotmail.com wrote: Hi: From UCME Admin guide http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmebasic.html#wp1108170 * Feature Comparison by Line Mode (SCCP Phones) FeatureSingle-Line Dual-Line Octo-Line *Barge — —Yes Busy Trigger— —Yes Conferencing (8-party) — 4 dn 1 dn FXO Trunk OptimizationYes Yes — Huntstop Channel — Yes Yes Intercom Yes —— Key System (one call per but ) Yes— — Maximum Calls — — Yes MWI Yes — — Overlay dn (c, o, x) YesYes — Paging Yes — — Park Yes — — Privacy — — Yes -- Date: Sun, 2 May 2010 10:13:38 -0700 From: vccie2...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] ephone-dn singlevs dual line features available ephone-dn 1 note : not a dual line number 1000 ephone 1 mac adds .. button 1:1 In this case, what one can't do - - confrence - for sure - transfer - ?? - ??? -??? I was able to transfer, not sure about Park and other things which can;t be done pls ? -- Hotmail: Trusted email with powerful SPAM protection. Sign up now.https://signup.live.com/signup.aspx?id=60969 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] ephone-dn singlevs dual line features available
ephone-dn 1 note : not a dual line number 1000 ephone 1 mac adds .. button 1:1 In this case, what one can't do - - confrence - for sure - transfer - ?? - ??? -??? I was able to transfer, not sure about Park and other things which can;t be done pls ? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] Lab 2 / q 6.3 - Qos on 3750 Switch
sh mls qos int fa1/0/8 queFastEthernet1/0/8 Egress Priority Queue : enabled Shaped queue weights (absolute) : 10 50 20 20 Shared queue weights : 10 10 60 20 The port bandwidth limit : 100 (Operational Bandwidth:100.0) The port is mapped to qset : 1 How do I change it to queue-set 2 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] ephone-dn singlevs dual line features available
thx Vik, I believe one will not be able to confernce too from this phone, right ? On Sun, May 2, 2010 at 7:52 PM, Vik Malhi vma...@ipexpert.com wrote: Consult transfer Call waiting -- Vik Malhi – CCIE #13890 Instructor - IPexpert, Inc. Mailto: *vma...@ipexpert.com *Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Live Assistance, Please visit: www.ipexpert.com/chat * http://www.ipexpert.com/chat* IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (RS, Voice, Security Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities *http://www.ipexpert.com/communities* and our public website at www.ipexpert.com *http://www.ipexpert.com/* -- *From: *vccie2010 vccie2...@gmail.com *Date: *Sun, 2 May 2010 10:13:38 -0700 *To: *OSL Group ccie_voice@onlinestudylist.com *Subject: *[OSL | CCIE_Voice] ephone-dn singlevs dual line features available ephone-dn 1 note : not a dual line number 1000 ephone 1 mac adds .. button 1:1 In this case, what one can't do - - confrence - for sure - transfer - ?? - ??? -??? I was able to transfer, not sure about Park and other things which can;t be done pls ? -- ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Lab 2 8.3 VPIM
Vik, On CUE when I define email domain IP addr of Unity ( Message from Unity to CUE works fine but can not send the message other way round from Unity to CUE) but if on CUE I use email domain cuc7-pub this is what I have as VPIM location on Unity and matches the SMTP domain on Unity, in this case it works from Unity to CUE and not from CUE to Unity) Can you please help me on this I am on IPX rack right now thx V On Fri, Apr 30, 2010 at 12:54 PM, vccie2010 vccie2...@gmail.com wrote: Vik, If we define cuc7-pub as domain name will it work , since CUE does not have DNS server configured ? Per the IPX solution I am using Unity IP address for the domain for unity location on cue. On Thu, Apr 29, 2010 at 9:48 PM, Vik Malhi vma...@ipexpert.com wrote: So the domain name defined in the unity location within cue should be cuc7-pub. Is that the case? It must match the domain name of the sender. Vik Malhi - CCIE#13890 Senior Technical Instructor - IPexpert Inc Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: vma...@ipexpert.com Join IPexpert's Free CCIE Peer Groups Study Communities at www.IPexpert.com/communities http://www.ipexpert.com/communitieshttp://www.ipexpert.com/communities On Apr 29, 2010, at 8:25 PM, vccie2010 vccie2...@gmail.com wrote: Sergio, This is what I get when trying to send VM from HQ to BR2 (Unity to CUE). when using PDL ... cue# sh trace buffer tail Press CTRL-C to exit... 8074 04/30 11:19:46.314 netw smtp 5 221 closing channel 5863 04/30 11:21:08.336 netw smtp 2 5863 04/30 11:21:08.364 netw smtp 3 socket hostName: 10.10.210.13, hostAddress: 10.10.210.13 5863 04/30 11:21:08.364 netw smtp 3 hostname: 10.10.210.13 found in good address cache 5863 04/30 11:21:08.366 netw smtp 1 8078 04/30 11:21:08.367 netw smtp 5 Initial connection message 8078 04/30 11:21:08.374 netw smtp 6 UNKNOWN: EHLO CUC7-Pub 8078 04/30 11:21:08.375 netw smtp 5 250-cue 8078 04/30 11:21:08.382 netw smtp 6 EHLO : MAIL FROM:5...@cuc7-pub 8078 04/30 11:21:08.400 netw smtp 5 554 5.1.8 Bad senders system address 8078 04/30 11:21:08.407 netw smtp 6 MAIL FROM:: QUIT 8078 04/30 11:21:08.407 netw smtp 5 221 closing channel == When dialing loc id plus ext 5863 04/30 11:24:22.303 netw smtp 1 8089 04/30 11:24:22.304 netw smtp 5 Initial connection message 8089 04/30 11:24:22.314 netw smtp 6 UNKNOWN: EHLO CUC7-Pub 8089 04/30 11:24:22.314 netw smtp 5 250-cue 8089 04/30 11:24:22.323 netw smtp 6 EHLO : MAIL FROM:5...@cuc7-pub 8089 04/30 11:24:22.342 netw smtp 5 554 5.1.8 Bad senders system address 8089 04/30 11:24:22.350 netw smtp 6 MAIL FROM:: QUIT 8089 04/30 11:24:22.351 netw smtp 5 221 closing channel Apprciate your help on this... On Sun, Apr 25, 2010 at 7:04 AM, Sergio Polizer spoli...@hotmail.comwrote: No, you can send vm addressing by name but You need to add remote user. CUE- remote username hqph1 location xxx / remote username hqph1 phonenumber 5001 UC- add remote user as Contacts. Tell us your configuration. Did you to try troubleshooting with: trace networking vpim all trace networking smtp all show trace buffer tail HTH, Sergio. -- Date: Sat, 24 Apr 2010 19:04:14 -0700 From: vccie2...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Lab 2 8.3 VPIM I am able to leave VM for Unity from BR2(CUE) but I have to dial Location ID plus the extension for HQ(Unity) , is it normal ? Also, can not leave msg from HQ to BR2, I am on IPX rack. any feedback will be helpful... -- Quer transformar suas fotos em emoticons para o Messenger? Clique aqui e veja como.http://ilm.windowslive.com.br/?ocid=ILM:ILM:Hotmail:Tagline:1x1:Tagline ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Is it must to give codec G711ulaw under voice register pool 1
Angel, So that should hold trur for SCCP phones too ? that is we should explictly mentione codec g711ulaw On Sat, May 1, 2010 at 5:29 PM, vccie2010 vccie2...@gmail.com wrote: Angel I give you 11 out of 10, I would not have thought about it in my dreams evev, thanks a million bud [?] On Sat, May 1, 2010 at 2:37 AM, Angel Perez gorr...@hotmail.com wrote: Hi, if you are asked to use g711 for intra-site calls and you don't specify codedc g771u under voice register pool, intrasite calls to/from this phone to let say to other sccp phone in the same site will use g729 and you will brake the requirements hth -- Date: Fri, 30 Apr 2010 19:25:10 -0700 From: vccie2...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Is it must to give codec G711ulaw under voice register pool 1 Is it must to give codec G711ulaw under voice register pool 1 I believe it Q dependent and also If I have G711ulaw under voice reg pool in that case if I am calling say via GK from HQ into CME the transcoders will be needed, but is there anythign else I am missing whcih will break if I don't mention any codec under voice reg pool...which by default is G729 thx -V -- Hotmail: Free, trusted and rich email service. Get it now.https://signup.live.com/signup.aspx?id=60969 360.gif___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Is it must to give codec G711ulaw under voice register pool 1
Angel I give you 11 out of 10, I would not have thought about it in my dreams evev, thanks a million bud [?] On Sat, May 1, 2010 at 2:37 AM, Angel Perez gorr...@hotmail.com wrote: Hi, if you are asked to use g711 for intra-site calls and you don't specify codedc g771u under voice register pool, intrasite calls to/from this phone to let say to other sccp phone in the same site will use g729 and you will brake the requirements hth -- Date: Fri, 30 Apr 2010 19:25:10 -0700 From: vccie2...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Is it must to give codec G711ulaw under voice register pool 1 Is it must to give codec G711ulaw under voice register pool 1 I believe it Q dependent and also If I have G711ulaw under voice reg pool in that case if I am calling say via GK from HQ into CME the transcoders will be needed, but is there anythign else I am missing whcih will break if I don't mention any codec under voice reg pool...which by default is G729 thx -V -- Hotmail: Free, trusted and rich email service. Get it now.https://signup.live.com/signup.aspx?id=60969 360.gif___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] ntp
Angel, thx for your response, what if Question specifically asks it , I am not able to see it thouh in the show or debug ntp commands ? Is thera away to verify it pls On Fri, Apr 30, 2010 at 12:17 AM, Angel Perez gorr...@hotmail.com wrote: Hi, is better to don't specify a source interface, ntp source lo0 this way all local interfaces are source of ntp, imagine that you have a routing issue and you can't ping that interface... or that this interface is down, you would be able to select another interface as source hth -- Date: Thu, 29 Apr 2010 16:30:44 -0700 From: vccie2...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] ntp PSTN RTR is NTP Master on EST - 5 HQ config - clock timezone PST -8 ntp source lo0 ntp server PSTN RTR IP HQ-RTR#sh ntp ass address ref clock st when poll reach delay offset disp *~10.10.100.2 127.127.7.1 4 564 377 2.02.78 0.0 * master (synced), # master (unsynced), + selected, - candidate, ~ configured HQ-RTR#s ntp st Clock is synchronized, stratum 5, reference is 10.10.100.2 nominal freq is 250. Hz, actual freq is 249. Hz, precision is 2**18 reference time is CF846F6D.9C13549E (12:49:49.609 PST Thu Apr 29 2010) clock offset is 2.7774 msec, root delay is 2.00 msec root dispersion is 2.82 msec, peer dispersion is 0.02 msec HQ-RTR#sh clo 12:50:11.431 PST Thu Apr 29 2010 ( this shows one hour behind ) ? How can I check the source interface used for NTP is loopback0 which in my case is 10.10.110.1 ??? any clues please ...thx -- Hotmail: Free, trusted and rich email service. Get it now.https://signup.live.com/signup.aspx?id=60969 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Transcoder and BACD issue
ON your GK trunk - Uncheck H245 box On Fri, Apr 30, 2010 at 12:20 PM, Jeff Cotter jcot...@voxns.com wrote: Station to Station calls work as expected between UCM and CME including g729 call through gatekeeper to CME sip phone using g711. Transcoder is invoked properly and confirmed with show sccp connections. Call Routing and Transcoder proven as functional with above. However call fails immediately if I put my GK Trunk on UCM to g729 region (due to codec mismatch). If I change CME BACD dial-peer to g729 you hear silence. Voice-class codec on BACD dial-p you hear silence. Change UCM Trunk to g711u region and BACD dial peer to g711u call works fine. How is one supposed to get calls over the WAN using g729 to work with BACD?? Dial-peer config below. All other config is proven to be working dial-peer voice 222 voip service aa destination-pattern 3500 session target ipv4:3.3.3.3 (loopback interface) incoming called-number 3500 dtmf-relay h245-alphanumeric codec g711ulaw no vad ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Lab 2 8.3 VPIM
Vik, If we define cuc7-pub as domain name will it work , since CUE does not have DNS server configured ? Per the IPX solution I am using Unity IP address for the domain for unity location on cue. On Thu, Apr 29, 2010 at 9:48 PM, Vik Malhi vma...@ipexpert.com wrote: So the domain name defined in the unity location within cue should be cuc7-pub. Is that the case? It must match the domain name of the sender. Vik Malhi - CCIE#13890 Senior Technical Instructor - IPexpert Inc Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: vma...@ipexpert.com Join IPexpert's Free CCIE Peer Groups Study Communities at www.IPexpert.com/communities http://www.ipexpert.com/communitieshttp://www.ipexpert.com/communities On Apr 29, 2010, at 8:25 PM, vccie2010 vccie2...@gmail.com wrote: Sergio, This is what I get when trying to send VM from HQ to BR2 (Unity to CUE). when using PDL ... cue# sh trace buffer tail Press CTRL-C to exit... 8074 04/30 11:19:46.314 netw smtp 5 221 closing channel 5863 04/30 11:21:08.336 netw smtp 2 5863 04/30 11:21:08.364 netw smtp 3 socket hostName: 10.10.210.13, hostAddress: 10.10.210.13 5863 04/30 11:21:08.364 netw smtp 3 hostname: 10.10.210.13 found in good address cache 5863 04/30 11:21:08.366 netw smtp 1 8078 04/30 11:21:08.367 netw smtp 5 Initial connection message 8078 04/30 11:21:08.374 netw smtp 6 UNKNOWN: EHLO CUC7-Pub 8078 04/30 11:21:08.375 netw smtp 5 250-cue 8078 04/30 11:21:08.382 netw smtp 6 EHLO : MAIL FROM:5...@cuc7-pub 8078 04/30 11:21:08.400 netw smtp 5 554 5.1.8 Bad senders system address 8078 04/30 11:21:08.407 netw smtp 6 MAIL FROM:: QUIT 8078 04/30 11:21:08.407 netw smtp 5 221 closing channel == When dialing loc id plus ext 5863 04/30 11:24:22.303 netw smtp 1 8089 04/30 11:24:22.304 netw smtp 5 Initial connection message 8089 04/30 11:24:22.314 netw smtp 6 UNKNOWN: EHLO CUC7-Pub 8089 04/30 11:24:22.314 netw smtp 5 250-cue 8089 04/30 11:24:22.323 netw smtp 6 EHLO : MAIL FROM:5...@cuc7-pub 8089 04/30 11:24:22.342 netw smtp 5 554 5.1.8 Bad senders system address 8089 04/30 11:24:22.350 netw smtp 6 MAIL FROM:: QUIT 8089 04/30 11:24:22.351 netw smtp 5 221 closing channel Apprciate your help on this... On Sun, Apr 25, 2010 at 7:04 AM, Sergio Polizer spoli...@hotmail.comwrote: No, you can send vm addressing by name but You need to add remote user. CUE- remote username hqph1 location xxx / remote username hqph1 phonenumber 5001 UC- add remote user as Contacts. Tell us your configuration. Did you to try troubleshooting with: trace networking vpim all trace networking smtp all show trace buffer tail HTH, Sergio. -- Date: Sat, 24 Apr 2010 19:04:14 -0700 From: vccie2...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Lab 2 8.3 VPIM I am able to leave VM for Unity from BR2(CUE) but I have to dial Location ID plus the extension for HQ(Unity) , is it normal ? Also, can not leave msg from HQ to BR2, I am on IPX rack. any feedback will be helpful... -- Quer transformar suas fotos em emoticons para o Messenger? Clique aqui e veja como.http://ilm.windowslive.com.br/?ocid=ILM:ILM:Hotmail:Tagline:1x1:Tagline ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Transcoder and BACD issue
Jeff, also *check *MTP Reguired box On Fri, Apr 30, 2010 at 12:49 PM, vccie2010 vccie2...@gmail.com wrote: ON your GK trunk - Uncheck H245 box On Fri, Apr 30, 2010 at 12:20 PM, Jeff Cotter jcot...@voxns.com wrote: Station to Station calls work as expected between UCM and CME including g729 call through gatekeeper to CME sip phone using g711. Transcoder is invoked properly and confirmed with show sccp connections. Call Routing and Transcoder proven as functional with above. However call fails immediately if I put my GK Trunk on UCM to g729 region (due to codec mismatch). If I change CME BACD dial-peer to g729 you hear silence. Voice-class codec on BACD dial-p you hear silence. Change UCM Trunk to g711u region and BACD dial peer to g711u call works fine. How is one supposed to get calls over the WAN using g729 to work with BACD?? Dial-peer config below. All other config is proven to be working dial-peer voice 222 voip service aa destination-pattern 3500 session target ipv4:3.3.3.3 (loopback interface) incoming called-number 3500 dtmf-relay h245-alphanumeric codec g711ulaw no vad ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] ntp
Thx Roger, but is there in any debug or show command to verify the same, I believe not, right ? On Fri, Apr 30, 2010 at 3:29 PM, Roger Henderson rhender...@gmail.comwrote: This is overkill but... you could put an ACL on your relevant interfaces that looks something like: access-list 101 permit udp ho 1.1.1.1 any eq 123 If 1.1.1.1 is your loopback you should see packet matches on that entry. HTH Roger On Sat, May 1, 2010 at 4:40 AM, vccie2010 vccie2...@gmail.com wrote: Angel, thx for your response, what if Question specifically asks it , I am not able to see it thouh in the show or debug ntp commands ? Is thera away to verify it pls On Fri, Apr 30, 2010 at 12:17 AM, Angel Perez gorr...@hotmail.comwrote: Hi, is better to don't specify a source interface, ntp source lo0 this way all local interfaces are source of ntp, imagine that you have a routing issue and you can't ping that interface... or that this interface is down, you would be able to select another interface as source hth -- Date: Thu, 29 Apr 2010 16:30:44 -0700 From: vccie2...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] ntp PSTN RTR is NTP Master on EST - 5 HQ config - clock timezone PST -8 ntp source lo0 ntp server PSTN RTR IP HQ-RTR#sh ntp ass address ref clock st when poll reach delay offsetdisp *~10.10.100.2 127.127.7.1 4 564 377 2.0 2.78 0.0 * master (synced), # master (unsynced), + selected, - candidate, ~ configured HQ-RTR#s ntp st Clock is synchronized, stratum 5, reference is 10.10.100.2 nominal freq is 250. Hz, actual freq is 249. Hz, precision is 2**18 reference time is CF846F6D.9C13549E (12:49:49.609 PST Thu Apr 29 2010) clock offset is 2.7774 msec, root delay is 2.00 msec root dispersion is 2.82 msec, peer dispersion is 0.02 msec HQ-RTR#sh clo 12:50:11.431 PST Thu Apr 29 2010 ( this shows one hour behind ) ? How can I check the source interface used for NTP is loopback0 which in my case is 10.10.110.1 ??? any clues please ...thx -- Hotmail: Free, trusted and rich email service. Get it now.https://signup.live.com/signup.aspx?id=60969 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] Is it must to give codec G711ulaw under voice register pool 1
Is it must to give codec G711ulaw under voice register pool 1 I believe it Q dependent and also If I have G711ulaw under voice reg pool in that case if I am calling say via GK from HQ into CME the transcoders will be needed, but is there anythign else I am missing whcih will break if I don't mention any codec under voice reg pool...which by default is G729 thx -V ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] UCCX - Auto Work Q
Under rmcm tab: Contact Service Queues Auto Work - enabled on Agent Based Routing Settings Auto Work - disabled how does it work and which one takes precedence ? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] QoS on switch
If I want Q1 to get 25 % BW, Q2 20%, Q3 40% and Q4 40% srr-queue bandwidth share 25 20 48 7 srr-queue bandwidth shaped 33 0 0 0 As Shape takes precedence over Shared and if we set Shape to 0 for that value, Share BW will be applied. Not sure if the above solution work ? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] QoS on switch
little correction .pls... If I want Q1 to get 33 % BW, Q2 20%, Q3 48% and Q4 7% srr-queue bandwidth share 25 20 48 7 srr-queue bandwidth shaped 33 0 0 0 On Wed, Apr 28, 2010 at 11:41 PM, vccie2010 vccie2...@gmail.com wrote: If I want Q1 to get 25 % BW, Q2 20%, Q3 40% and Q4 40% srr-queue bandwidth share 25 20 48 7 srr-queue bandwidth shaped 33 0 0 0 As Shape takes precedence over Shared and if we set Shape to 0 for that value, Share BW will be applied. Not sure if the above solution work ? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] 7965 Phone tftp-server statements
Unfortunately I have 7962 phones in my lab and will appreciate if someone can help me with with all tftp-server statements required on CME for a 7965 SIP and 7965 SCCP phones... Appreciate your help on this... thx / V ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] QoS on switch
Appreciate your reply on this... have some doubt ... **you have assigned shape 3 for Q1 and Share 1 for Q1 - so in this case why we need to have 1 on share ? CAT2970(config-if-range)# srr-queue bandwidth shape 3 0 0 0 !Q1 is limited to 1/3 of the total available BW CAT2970(config-if-range)# srr-queue bandwidth share 1 70 25 5 ! Q2 gets 70% of remaining BW; Q3 gets 25% and Q4 gets 5 *Also the second statement shd be share 1 70 25 0 instead of share 1 70 25 1 right pls ?? On Wed, Apr 28, 2010 at 11:54 PM, Roger Henderson rhender...@gmail.comwrote: Oops, Angel is right - I didn't notice your share command there (which replaces the 32.3, 32.3, 32.3) with appropriate ratios. Roger 2010/4/29 Angel Perez gorr...@hotmail.com From QoS Entreprise 3.3 Campus QoS Design chapter: CAT2970(config-if-range)# srr-queue bandwidth shape 3 0 0 0 !Q1 is limited to 1/3 of the total available BW CAT2970(config-if-range)# srr-queue bandwidth share 1 70 25 5 ! Q2 gets 70% of remaining BW; Q3 gets 25% and Q4 gets 5% shape 3 0 0 0 = 1/3 0 0 0 = 33% 0 0 0 share 1 70 25 0 = 1 take shape 70% 25% 0% from remaining hth -- Date: Wed, 28 Apr 2010 23:43:34 -0700 From: vccie2...@gmail.com To: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] QoS on switch little correction .pls... If I want Q1 to get 33 % BW, Q2 20%, Q3 48% and Q4 7% srr-queue bandwidth share 25 20 48 7 srr-queue bandwidth shaped 33 0 0 0 On Wed, Apr 28, 2010 at 11:41 PM, vccie2010 vccie2...@gmail.com wrote: If I want Q1 to get 25 % BW, Q2 20%, Q3 40% and Q4 40% srr-queue bandwidth share 25 20 48 7 srr-queue bandwidth shaped 33 0 0 0 As Shape takes precedence over Shared and if we set Shape to 0 for that value, Share BW will be applied. Not sure if the above solution work ? -- Hotmail: Powerful Free email with security by Microsoft. Get it now.https://signup.live.com/signup.aspx?id=60969 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] 7965 Phone tftp-server statements
That helps a lot Roger. Appreciate it !!! On Thu, Apr 29, 2010 at 12:05 AM, Roger Henderson rhender...@gmail.comwrote: These are the files on my Proctorlabs router: 103 2496963 Oct 19 2007 07:11:16 PHONE/7945-7965/apps45.8-3-2-27.sbn 104 585536 Oct 19 2007 07:11:14 PHONE/7945-7965/cnu45.8-3-2-27.sbn 105 2453202 Dec 18 2008 12:46:18 PHONE/7945-7965/cvm45sccp.8-3-2-27.sbn 106 326315 Oct 19 2007 07:11:18 PHONE/7945-7965/dsp45.8-3-2-27.sbn 107 555406 Dec 18 2008 12:46:30 PHONE/7945-7965/jar45sccp.8-3-2-27.sbn 108 638 Dec 18 2008 12:46:30 PHONE/7945-7965/SCCP45.8-3-3S.loads 109 642 Oct 19 2007 07:11:10 PHONE/7945-7965/term45.default.loads 110 642 Oct 19 2007 07:11:12 PHONE/7945-7965/term65.default.loads 111 650 Sep 18 2009 08:20:06 PHONE/7945-7965/SIP45.8-5-3S.loads 112 2817568 Oct 19 2007 07:11:20 PHONE/7945-7965/cvm45sip.8-3-2-27.sbn 113 557452 Oct 19 2007 07:11:18 PHONE/7945-7965/jar45sip.8-3-2-27.sbn 114 638 Oct 19 2007 07:11:08 PHONE/7945-7965/SIP45.8-3-3S.loads I hope that helps. Roger On Thu, Apr 29, 2010 at 4:59 PM, vccie2010 vccie2...@gmail.com wrote: Unfortunately I have 7962 phones in my lab and will appreciate if someone can help me with with all tftp-server statements required on CME for a 7965 SIP and 7965 SCCP phones... Appreciate your help on this... thx / V ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] QoS on switch
Thx for your kind clarification, now if I have to also enable PQ will I have to enable priority-queue out on the interface but in that case Q1 will still be the PQ or there will be one more Q assigned but I think the port only has 4 egress Qs ? 2010/4/29 Angel Perez gorr...@hotmail.com Hi, when you set 1 in share like share 1 x x x you are telling the switch to take the shape value for this queue, 33% in the previous example -- Date: Thu, 29 Apr 2010 00:08:24 -0700 Subject: Re: [OSL | CCIE_Voice] QoS on switch From: vccie2...@gmail.com To: rhender...@gmail.com CC: gorr...@hotmail.com; ccie_voice@onlinestudylist.com Appreciate your reply on this... have some doubt ... **you have assigned shape 3 for Q1 and Share 1 for Q1 - so in this case why we need to have 1 on share ? CAT2970(config-if-range)# srr-queue bandwidth shape 3 0 0 0 !Q1 is limited to 1/3 of the total available BW CAT2970(config-if-range)# srr-queue bandwidth share 1 70 25 5 ! Q2 gets 70% of remaining BW; Q3 gets 25% and Q4 gets 5 *Also the second statement shd be share 1 70 25 0 instead of share 1 70 25 1 right pls ?? On Wed, Apr 28, 2010 at 11:54 PM, Roger Henderson rhender...@gmail.comwrote: Oops, Angel is right - I didn't notice your share command there (which replaces the 32.3, 32.3, 32.3) with appropriate ratios. Roger 2010/4/29 Angel Perez gorr...@hotmail.com From QoS Entreprise 3.3 Campus QoS Design chapter: CAT2970(config-if-range)# srr-queue bandwidth shape 3 0 0 0 !Q1 is limited to 1/3 of the total available BW CAT2970(config-if-range)# srr-queue bandwidth share 1 70 25 5 ! Q2 gets 70% of remaining BW; Q3 gets 25% and Q4 gets 5% shape 3 0 0 0 = 1/3 0 0 0 = 33% 0 0 0 share 1 70 25 0 = 1 take shape 70% 25% 0% from remaining hth -- Date: Wed, 28 Apr 2010 23:43:34 -0700 From: vccie2...@gmail.com To: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] QoS on switch little correction .pls... If I want Q1 to get 33 % BW, Q2 20%, Q3 48% and Q4 7% srr-queue bandwidth share 25 20 48 7 srr-queue bandwidth shaped 33 0 0 0 On Wed, Apr 28, 2010 at 11:41 PM, vccie2010 vccie2...@gmail.com wrote: If I want Q1 to get 25 % BW, Q2 20%, Q3 40% and Q4 40% srr-queue bandwidth share 25 20 48 7 srr-queue bandwidth shaped 33 0 0 0 As Shape takes precedence over Shared and if we set Shape to 0 for that value, Share BW will be applied. Not sure if the above solution work ? -- Hotmail: Powerful Free email with security by Microsoft. Get it now.https://signup.live.com/signup.aspx?id=60969 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com -- Hotmail: Powerful Free email with security by Microsoft. Get it now.https://signup.live.com/signup.aspx?id=60969 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] QoS on switch
Perfect, so in a given scenario wher I have to assign particular percent of BW and PQ to be Q1 the solution discussed here should work. Let me lab it and update. thx Angel and Roger On Thu, Apr 29, 2010 at 12:29 AM, Roger Henderson rhender...@gmail.comwrote: Priority-queue out sets port 1 on the egress to be the priority queue. Only queue 1 can be an egress priority queue on the 3750. Roger On Thu, Apr 29, 2010 at 5:27 PM, vccie2010 vccie2...@gmail.com wrote: Thx for your kind clarification, now if I have to also enable PQ will I have to enable priority-queue out on the interface but in that case Q1 will still be the PQ or there will be one more Q assigned but I think the port only has 4 egress Qs ? 2010/4/29 Angel Perez gorr...@hotmail.com Hi, when you set 1 in share like share 1 x x x you are telling the switch to take the shape value for this queue, 33% in the previous example -- Date: Thu, 29 Apr 2010 00:08:24 -0700 Subject: Re: [OSL | CCIE_Voice] QoS on switch From: vccie2...@gmail.com To: rhender...@gmail.com CC: gorr...@hotmail.com; ccie_voice@onlinestudylist.com Appreciate your reply on this... have some doubt ... **you have assigned shape 3 for Q1 and Share 1 for Q1 - so in this case why we need to have 1 on share ? CAT2970(config-if-range)# srr-queue bandwidth shape 3 0 0 0 !Q1 is limited to 1/3 of the total available BW CAT2970(config-if-range)# srr-queue bandwidth share 1 70 25 5 ! Q2 gets 70% of remaining BW; Q3 gets 25% and Q4 gets 5 *Also the second statement shd be share 1 70 25 0 instead of share 1 70 25 1 right pls ?? On Wed, Apr 28, 2010 at 11:54 PM, Roger Henderson rhender...@gmail.comwrote: Oops, Angel is right - I didn't notice your share command there (which replaces the 32.3, 32.3, 32.3) with appropriate ratios. Roger 2010/4/29 Angel Perez gorr...@hotmail.com From QoS Entreprise 3.3 Campus QoS Design chapter: CAT2970(config-if-range)# srr-queue bandwidth shape 3 0 0 0 ! Q1 is limited to 1/3 of the total available BW CAT2970(config-if-range)# srr-queue bandwidth share 1 70 25 5 ! Q2 gets 70% of remaining BW; Q3 gets 25% and Q4 gets 5% shape 3 0 0 0 = 1/3 0 0 0 = 33% 0 0 0 share 1 70 25 0 = 1 take shape 70% 25% 0% from remaining hth -- Date: Wed, 28 Apr 2010 23:43:34 -0700 From: vccie2...@gmail.com To: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] QoS on switch little correction .pls... If I want Q1 to get 33 % BW, Q2 20%, Q3 48% and Q4 7% srr-queue bandwidth share 25 20 48 7 srr-queue bandwidth shaped 33 0 0 0 On Wed, Apr 28, 2010 at 11:41 PM, vccie2010 vccie2...@gmail.com wrote: If I want Q1 to get 25 % BW, Q2 20%, Q3 40% and Q4 40% srr-queue bandwidth share 25 20 48 7 srr-queue bandwidth shaped 33 0 0 0 As Shape takes precedence over Shared and if we set Shape to 0 for that value, Share BW will be applied. Not sure if the above solution work ? -- Hotmail: Powerful Free email with security by Microsoft. Get it now.https://signup.live.com/signup.aspx?id=60969 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com -- Hotmail: Powerful Free email with security by Microsoft. Get it now.https://signup.live.com/signup.aspx?id=60969 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] Link to CME 7.0 Admin Guide
Pardon my ingnorance, can;t seem to get to the link for CME 7.0 Admin Guide. I am clikcing SupportConfigureProductsvocie and video comm IP Telephone Call Control CME Configration Guide CME Admin Guide ( but this Admin guide is 7.1 ) I am looking for CME 7.0 which I believe is the version in exam thx for ur help ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] QoS on switch
Sure, will so Angelthx once again... 2010/4/29 Angel Perez gorr...@hotmail.com Yes vccie2010 take a look to Qos SRND Campus Qos Design Chaper 3750 subchapter hth -- Date: Thu, 29 Apr 2010 17:29:49 +1000 Subject: Re: [OSL | CCIE_Voice] QoS on switch From: rhender...@gmail.com To: vccie2...@gmail.com CC: gorr...@hotmail.com; ccie_voice@onlinestudylist.com Priority-queue out sets port 1 on the egress to be the priority queue. Only queue 1 can be an egress priority queue on the 3750. Roger On Thu, Apr 29, 2010 at 5:27 PM, vccie2010 vccie2...@gmail.com wrote: Thx for your kind clarification, now if I have to also enable PQ will I have to enable priority-queue out on the interface but in that case Q1 will still be the PQ or there will be one more Q assigned but I think the port only has 4 egress Qs ? 2010/4/29 Angel Perez gorr...@hotmail.com Hi, when you set 1 in share like share 1 x x x you are telling the switch to take the shape value for this queue, 33% in the previous example -- Date: Thu, 29 Apr 2010 00:08:24 -0700 Subject: Re: [OSL | CCIE_Voice] QoS on switch From: vccie2...@gmail.com To: rhender...@gmail.com CC: gorr...@hotmail.com; ccie_voice@onlinestudylist.com Appreciate your reply on this... have some doubt ... **you have assigned shape 3 for Q1 and Share 1 for Q1 - so in this case why we need to have 1 on share ? CAT2970(config-if-range)# srr-queue bandwidth shape 3 0 0 0 !Q1 is limited to 1/3 of the total available BW CAT2970(config-if-range)# srr-queue bandwidth share 1 70 25 5 ! Q2 gets 70% of remaining BW; Q3 gets 25% and Q4 gets 5 *Also the second statement shd be share 1 70 25 0 instead of share 1 70 25 1 right pls ?? On Wed, Apr 28, 2010 at 11:54 PM, Roger Henderson rhender...@gmail.comwrote: Oops, Angel is right - I didn't notice your share command there (which replaces the 32.3, 32.3, 32.3) with appropriate ratios. Roger 2010/4/29 Angel Perez gorr...@hotmail.com From QoS Entreprise 3.3 Campus QoS Design chapter: CAT2970(config-if-range)# srr-queue bandwidth shape 3 0 0 0 !Q1 is limited to 1/3 of the total available BW CAT2970(config-if-range)# srr-queue bandwidth share 1 70 25 5 ! Q2 gets 70% of remaining BW; Q3 gets 25% and Q4 gets 5% shape 3 0 0 0 = 1/3 0 0 0 = 33% 0 0 0 share 1 70 25 0 = 1 take shape 70% 25% 0% from remaining hth -- Date: Wed, 28 Apr 2010 23:43:34 -0700 From: vccie2...@gmail.com To: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] QoS on switch little correction .pls... If I want Q1 to get 33 % BW, Q2 20%, Q3 48% and Q4 7% srr-queue bandwidth share 25 20 48 7 srr-queue bandwidth shaped 33 0 0 0 On Wed, Apr 28, 2010 at 11:41 PM, vccie2010 vccie2...@gmail.com wrote: If I want Q1 to get 25 % BW, Q2 20%, Q3 40% and Q4 40% srr-queue bandwidth share 25 20 48 7 srr-queue bandwidth shaped 33 0 0 0 As Shape takes precedence over Shared and if we set Shape to 0 for that value, Share BW will be applied. Not sure if the above solution work ? -- Hotmail: Powerful Free email with security by Microsoft. Get it now.https://signup.live.com/signup.aspx?id=60969 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com -- Hotmail: Powerful Free email with security by Microsoft. Get it now.https://signup.live.com/signup.aspx?id=60969 -- Your E-mail and More On-the-Go. Get Windows Live Hotmail Free. Sign up now. https://signup.live.com/signup.aspx?id=60969 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Link to CME 7.0 Admin Guide
I am looking for CME 7.0 please and not CUCM :) On Thu, Apr 29, 2010 at 12:55 AM, Angel Perez gorr...@hotmail.com wrote: Hi: from UCM gui web page click help and then contents -- Date: Thu, 29 Apr 2010 00:40:50 -0700 From: vccie2...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Link to CME 7.0 Admin Guide Pardon my ingnorance, can;t seem to get to the link for CME 7.0 Admin Guide. I am clikcing SupportConfigureProductsvocie and video comm IP Telephone Call Control CME Configration Guide CME Admin Guide ( but this Admin guide is 7.1 ) I am looking for CME 7.0 which I believe is the version in exam thx for ur help -- Hotmail: Trusted email with powerful SPAM protection. Sign up now.https://signup.live.com/signup.aspx?id=60969 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] IPX - please help.....Trying to donwload my config files and getting error An Error has occured while processing your request
Thanks Wayne !!! Appreciate it. thanks all for yoru help as well. On Thu, Apr 29, 2010 at 6:55 AM, Tanner Ezell tanner.ez...@gmail.comwrote: I ran into this the other day and emailed support, they said the file expired. After emailing, magically a new category at the top of the downloads page appeared and I could download the configs again. Just send an email and you should be set. On Thu, Apr 29, 2010 at 7:19 AM, Wayne Lawson groupst...@ipexpert.com wrote: I'll have our support team take a look at this. Regards, Wayne A. Lawson II - CCIE #5244 (RS) Founder, President CEO - IPexpert, Inc., Proctor Labs, Inc. Platinum Solutions Group, LLC. Mailto: wlaw...@ipexpert.com Telephone: +1.810.334.1564 eFax: +1.810.454.0130 ::Message sent from iPhone:: IPexpert Proctor Labs are premier providers of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (RS, Voice, Security Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities and our public website at www.ipexpert.comor www.proctorlabs.com. Platinum Solutions Group (PSG) provides high-end consulting services with a primary emphasis on Cisco's Data Center Solutions, Service Provider Solutions, Unified Communications and Security-enabled infrastructures. Be sure to visit www.platinumsolutionsgroup.com. On Apr 29, 2010, at 6:39 AM, Dew Swen dew.s...@gmail.com wrote: Same with me. -- Dew Swen CCVP, CCNP 29.04.2010 08:27, vccie2010 yazmış: CCIE Voice Version 6 (CCIE v3 BP) Volume 1, Configs and Diagrams CCIE Voice: BLS Volume 1, Config Files, v6 An Error has occured while processing your request ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com -- Cheers, Tanner Ezell ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] 7965 Phone tftp-server statements
Thank you Steve, you rock !!! On Thu, Apr 29, 2010 at 8:41 AM, Steve Denney (stdenney) stden...@cisco.com wrote: FYI, here’s a very helpful link to find exactly which load files are included on all CME versions: Cisco Unified CME 7.0(1) Supported Firmware, Platforms, Memory, and Voice Products http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme701spc.htm (this is for CME v7.0(1) - just navigate up one level to the Compatibility Information link to find any other version) cheers, sd *From:* ccie_voice-boun...@onlinestudylist.com [mailto: ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *vccie2010 *Sent:* Thursday, April 29, 2010 3:11 AM *To:* Roger Henderson *Cc:* ccie_voice@onlinestudylist.com *Subject:* Re: [OSL | CCIE_Voice] 7965 Phone tftp-server statements That helps a lot Roger. Appreciate it !!! On Thu, Apr 29, 2010 at 12:05 AM, Roger Henderson rhender...@gmail.com wrote: These are the files on my Proctorlabs router: 103 2496963 Oct 19 2007 07:11:16 PHONE/7945-7965/apps45.8-3-2-27.sbn 104 585536 Oct 19 2007 07:11:14 PHONE/7945-7965/cnu45.8-3-2-27.sbn 105 2453202 Dec 18 2008 12:46:18 PHONE/7945-7965/cvm45sccp.8-3-2-27.sbn 106 326315 Oct 19 2007 07:11:18 PHONE/7945-7965/dsp45.8-3-2-27.sbn 107 555406 Dec 18 2008 12:46:30 PHONE/7945-7965/jar45sccp.8-3-2-27.sbn 108 638 Dec 18 2008 12:46:30 PHONE/7945-7965/SCCP45.8-3-3S.loads 109 642 Oct 19 2007 07:11:10 PHONE/7945-7965/term45.default.loads 110 642 Oct 19 2007 07:11:12 PHONE/7945-7965/term65.default.loads 111 650 Sep 18 2009 08:20:06 PHONE/7945-7965/SIP45.8-5-3S.loads 112 2817568 Oct 19 2007 07:11:20 PHONE/7945-7965/cvm45sip.8-3-2-27.sbn 113 557452 Oct 19 2007 07:11:18 PHONE/7945-7965/jar45sip.8-3-2-27.sbn 114 638 Oct 19 2007 07:11:08 PHONE/7945-7965/SIP45.8-3-3S.loads I hope that helps. Roger On Thu, Apr 29, 2010 at 4:59 PM, vccie2010 vccie2...@gmail.com wrote: Unfortunately I have 7962 phones in my lab and will appreciate if someone can help me with with all tftp-server statements required on CME for a 7965 SIP and 7965 SCCP phones... Appreciate your help on this... thx / V ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Lab 2 8.3 VPIM
Thanks Sergio, I will try that and update. Vik, Otto or Amy ( anyone from IPX ) - what are your recommendation please ? thx for your help On Thu, Apr 29, 2010 at 6:45 AM, Sergio Polizer spoli...@hotmail.comwrote: Hi vccie2010, For UC side, while creating a new connection add the Local Extension what provides what are you looking for. From CUE side, I don't think that It is possibe. But the workaround is to create a Public Distribution List with the remote user number that you want to dial by number. Also, you have to add the remote user as a member of this PDL. : ) HTH, Sergio. -- Date: Wed, 28 Apr 2010 13:12:40 -0700 Subject: Re: [OSL | CCIE_Voice] Lab 2 8.3 VPIM From: vccie2...@gmail.com To: spoli...@hotmail.com CC: ccie_voice@onlinestudylist.com Sergio, I am trying to dial by extension and not name...will it work without adding remotes users on CUE and UC for each other ? On Sun, Apr 25, 2010 at 7:04 AM, Sergio Polizer spoli...@hotmail.comwrote: No, you can send vm addressing by name but You need to add remote user. CUE- remote username hqph1 location xxx / remote username hqph1 phonenumber 5001 UC- add remote user as Contacts. Tell us your configuration. Did you to try troubleshooting with: trace networking vpim all trace networking smtp all show trace buffer tail HTH, Sergio. -- Date: Sat, 24 Apr 2010 19:04:14 -0700 From: vccie2...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Lab 2 8.3 VPIM I am able to leave VM for Unity from BR2(CUE) but I have to dial Location ID plus the extension for HQ(Unity) , is it normal ? Also, can not leave msg from HQ to BR2, I am on IPX rack. any feedback will be helpful... -- Quer transformar suas fotos em emoticons para o Messenger? Clique aqui e veja como.http://ilm.windowslive.com.br/?ocid=ILM:ILM:Hotmail:Tagline:1x1:Tagline -- Cansado de entrar em todas as suas diferentes contas de email? Veja como juntar todashttp://www.windowslive.com.br/public/tip.aspx/view/16?product=1ocid=Hotmail:MSN:Hotmail:Tagline:1x1:semLinha ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Active Directory
Glad to know that it worked for you Angel On Thu, Apr 29, 2010 at 1:09 AM, Angel Perez gorr...@hotmail.com wrote: Hi: I finally manage to solve this, the problem was LDAP Manager Distinguished Name and LDAP User Search Base, this is the way it looks know: LDAP Manager Distinguished Name: cn=Administrator,cn=Users,dc=cisco,dc=lab LDAP User Search Base: cn=Users,dc=cisco,dc=lab LDAP User Search Base cn=Users,dc=cdg,dc=com Assuming that you dc is cisco.lab and that you want to search users in the Users group hth -- From: gorr...@hotmail.com To: ccie_voice@onlinestudylist.com Date: Thu, 29 Apr 2010 07:26:09 + Subject: Re: [OSL | CCIE_Voice] Active Directory I've found one: http://docwiki.cisco.com/wiki/Corporate_Directory_Integration_with_Cisco_Unified_Communications_Manager -- From: gorr...@hotmail.com To: ccie_voice@onlinestudylist.com Date: Thu, 29 Apr 2010 07:16:57 + Subject: [OSL | CCIE_Voice] Active Directory Hi all: Yesterday I was trying to integrate UCM with AD, I get problems synchonizing the users, any good resource for this? THX -- Hotmail: Trusted email with powerful SPAM protection. Sign up now.https://signup.live.com/signup.aspx?id=60969 -- Hotmail: Powerful Free email with security by Microsoft. Get it now.https://signup.live.com/signup.aspx?id=60969 -- Your E-mail and More On-the-Go. Get Windows Live Hotmail Free. Sign up now. https://signup.live.com/signup.aspx?id=60969 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] UCM Personal Directory Error
Try this out...might be helpful http://docs.google.com/viewer?a=vq=cache:tOqpVoOf8BUJ:www.ciscocertified.info/application/pdf/paws/109369/fix_issucorp.pdf+error+contact+system+administrator+cisco+cucm+personal+directoryhl=engl=uspid=blsrcid=ADGEEShqjNZGHmBt9hSwKO_HCeLklQZy6pPZALq1fZkTSsZNtw5H72r6eNU9lGBvuC-Y75srZ_TM9suBH4T1R7XFX9iWn6GDNZZn6eMIVdIFnIY7VAb3BOuIpSRNYF4YeAxx774MyES9sig=AHIEtbREtLDh9h3R-koPVhTUQxA0py0axg On Thu, Apr 29, 2010 at 10:05 AM, Jeff Cotter jcot...@voxns.com wrote: I get an “error contact system administrator” when I select Directories button than Personal Directory or Corporate Directory for that matter. (no ldap synchronization in place. Users have been added locally in UCM) I have the URL from PUB to IP address for all services under Enterprise Parameters, the phone service for personal directory is the default setting and is enabled. Phones are 7965s I can access the user web page and edit the PAB but can’t access from Phone. Looking for some direction on troubleshooting this. Thanks Jeff ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] UCM Personal Directory Error
try restarting Cisco Tomcat service On Thu, Apr 29, 2010 at 10:38 AM, Jeff Cotter jcot...@voxns.com wrote: Thanks, I did read that but does not help. *From:* vccie2010 [mailto:vccie2...@gmail.com] *Sent:* Thursday, April 29, 2010 10:36 AM *To:* Jeff Cotter *Cc:* ccie_voice@onlinestudylist.com *Subject:* Re: [OSL | CCIE_Voice] UCM Personal Directory Error Try this out...might be helpful http://docs.google.com/viewer?a=vq=cache:tOqpVoOf8BUJ:www.ciscocertified.info/application/pdf/paws/109369/fix_issucorp.pdf+error+contact+system+administrator+cisco+cucm+personal+directoryhl=engl=uspid=blsrcid=ADGEEShqjNZGHmBt9hSwKO_HCeLklQZy6pPZALq1fZkTSsZNtw5H72r6eNU9lGBvuC-Y75srZ_TM9suBH4T1R7XFX9iWn6GDNZZn6eMIVdIFnIY7VAb3BOuIpSRNYF4YeAxx774MyES9sig=AHIEtbREtLDh9h3R-koPVhTUQxA0py0axg On Thu, Apr 29, 2010 at 10:05 AM, Jeff Cotter jcot...@voxns.com wrote: I get an “error contact system administrator” when I select Directories button than Personal Directory or Corporate Directory for that matter. (no ldap synchronization in place. Users have been added locally in UCM) I have the URL from PUB to IP address for all services under Enterprise Parameters, the phone service for personal directory is the default setting and is enabled. Phones are 7965s I can access the user web page and edit the PAB but can’t access from Phone. Looking for some direction on troubleshooting this. Thanks Jeff ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] Unable to open .aef file on CRS editor
I am trying to open .aef file on CRS edittor, when I open the file, CRS Editor prompts for user name, pass and IP for server. I tried with annonymous and other regular usrname but no luck.am I missing somehing hereI remeber I was able to login offline on CRS editor with u/p - annonymous/ annonymous on UCCX 4.0 thx for your help ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Unable to open .aef file on CRS editor
no luck tired with AppAdmin and Annonymous On Thu, Apr 29, 2010 at 11:02 AM, Berry, Matthew J. mjbe...@krollontrack.com wrote: Jeff – Use the username and password that is used to login to AppAdmin. Pay attention! The login is case-sensitive. If AppAdam/CUCM sees your login ID as JCotter, you better enter it exactly (jcotter will not work). There should be a button on the login screen to login anonymously. Really the only different is that you won’t be able to load repository scripts from the Editor and reactive debugging won’t work. Let me know how it goes. *From:* ccie_voice-boun...@onlinestudylist.com [mailto: ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *vccie2010 *Sent:* Thursday, April 29, 2010 12:57 PM *To:* ccie_voice@onlinestudylist.com *Subject:* [OSL | CCIE_Voice] Unable to open .aef file on CRS editor I am trying to open .aef file on CRS edittor, when I open the file, CRS Editor prompts for user name, pass and IP for server. I tried with annonymous and other regular usrname but no luck.am I missing somehing hereI remeber I was able to login offline on CRS editor with u/p - annonymous/ annonymous on UCCX 4.0 thx for your help ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] IPMA and Intercom Line Labels
Mathew, If you don't define Intercom under Manager configs , does your intercom still work in IPMA mode while both Mgr and Asst are logged in? Could you please validate for us. thx On Thu, Apr 29, 2010 at 11:38 AM, Graham Hopkins ghopk...@wolf-rock.co.ukwrote: Matthew, thanks for that. Graham On 29 Apr 2010, at 19:34, Matthew Berry ciscovoiceg...@gmail.com wrote: Graham - This is what I noticed during that lab. Under the Manager/Assistant configuration screen there is the option to define intercom numbers. If you leave that drop-down field as Unassigned, when you login to IPMA the name will not change. However, if you specify an intercom in that field, the label will change. *Matthew Berry* *A+, CCENT, CCNA, CCNA Voice, CCVP, CCIE Voice Written* *Vitals:* *GVoice: *+1.612.424.5044 *Gmail*: ciscovoiceg...@gmail.com *Skype*: ciscovoiceguru *Twitter*: ciscovoiceguru *Cert Stats:* Cisco Cert Journey Began: Jan 1, 2009 1st Lab Attempt: Aug 16, 2010 On 4/29/2010 12:54 PM, Graham Hopkins wrote: Some of the labs show an extension - say 1080 and an intercom say *1080 as labels on the phone. When I tested IPMA with 7960s this is what I got. However have since started using some 7961s and the line label changes. When the assistant is logged out of the desktop app label reads *1080 when they are logged in it changes to manager. Setting labels manually in the line config doesn't seem to make any difference. Really wanted to know of this relates to the phone model or if there is some other setting I have overlooked? Obviously the name label is better for users but I guess it doesn't fulfil the the workbook requirement. Regards Graham Hopkins ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Unable to open .aef file on CRS editor
Yes plsI am going to lab tonigh on IPX and will download it again and update here pls On Thu, Apr 29, 2010 at 12:05 PM, Tanner Ezell tanner.ez...@gmail.comwrote: That's a version related error. Are you using the CRS editor as downloaded directly from the server? On Thu, Apr 29, 2010 at 2:57 PM, vccie2010 vccie2...@gmail.com wrote: And I am getting this error (attached) now opening the IPX .aef file for Vol2Lab10-solution.aef seems like what you said Tanner [?] On Thu, Apr 29, 2010 at 11:45 AM, Tanner Ezell tanner.ez...@gmail.comwrote: I bet you love Java even more.. ugh. Sadly there is no way around that requirement for the CRS Editor. For the curious: UCCX Scripts are simply serialized java code that is fed into the platform, deserialized and executed. This is annoying for a couple reasons, one, it requires that you have the *exact* version of java installed with CRS editor that is used by the platform, and it's java, so it's a huge pain the ass the rest of the time. *dreams of the day when there will be an OS X compatible CRS Editor* On Thu, Apr 29, 2010 at 2:40 PM, vccie2010 vccie2...@gmail.com wrote: yes plsI just un-installed and installed back again. Login as admin and pass c1sc0123 it works now :) I LOVE Windows... On Thu, Apr 29, 2010 at 11:29 AM, Tanner Ezell tanner.ez...@gmail.com wrote: In no situation should you not be able to login anonymously, is the software installed locally? Check the logs. On Thu, Apr 29, 2010 at 2:22 PM, Berry, Matthew J. mjbe...@krollontrack.com wrote: If using PL, did you try admin and c1sc0123? From: vccie2010 [mailto:vccie2...@gmail.com] Sent: Thursday, April 29, 2010 1:20 PM To: Berry, Matthew J. Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Unable to open .aef file on CRS editor no luck tired with AppAdmin and Annonymous On Thu, Apr 29, 2010 at 11:02 AM, Berry, Matthew J. mjbe...@krollontrack.com wrote: Jeff – Use the username and password that is used to login to AppAdmin. Pay attention! The login is case-sensitive. If AppAdam/CUCM sees your login ID as JCotter, you better enter it exactly (jcotter will not work). There should be a button on the login screen to login anonymously. Really the only different is that you won’t be able to load repository scripts from the Editor and reactive debugging won’t work. Let me know how it goes. From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of vccie2010 Sent: Thursday, April 29, 2010 12:57 PM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Unable to open .aef file on CRS editor I am trying to open .aef file on CRS edittor, when I open the file, CRS Editor prompts for user name, pass and IP for server. I tried with annonymous and other regular usrname but no luck.am I missing somehing hereI remeber I was able to login offline on CRS editor with u/p - annonymous/ annonymous on UCCX 4.0 thx for your help ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com -- Cheers, Tanner Ezell -- Cheers, Tanner Ezell -- Cheers, Tanner Ezell 330.gif___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] UCM Personal Directory Error ( SOLVED)
Jeff, Glad to know that. I took that you had changed that one already since I ALWAYS change Server name to IP address as first step [?] as with hostname it causes lots of issues... On Thu, Apr 29, 2010 at 12:19 PM, Jeff Cotter jcot...@voxns.com wrote: Had to change the name of server to IP Address under SystemServer and restart CallManager. J *From:* vccie2010 [mailto:vccie2...@gmail.com] *Sent:* Thursday, April 29, 2010 11:14 AM *To:* Jeff Cotter *Cc:* ccie_voice@onlinestudylist.com *Subject:* Re: [OSL | CCIE_Voice] UCM Personal Directory Error I will make sure that all the services are up and I am sure you have tried restarted the server too :) I will try to reproduce on my lab tonight... IPX team are you aware of this issue pls ? On Thu, Apr 29, 2010 at 10:56 AM, Jeff Cotter jcot...@voxns.com wrote: Thanks, but no luck…. same problem after restarting Tomcat Service. *From:* vccie2010 [mailto:vccie2...@gmail.com] *Sent:* Thursday, April 29, 2010 10:54 AM *To:* Jeff Cotter *Cc:* ccie_voice@onlinestudylist.com *Subject:* Re: [OSL | CCIE_Voice] UCM Personal Directory Error try restarting Cisco Tomcat service On Thu, Apr 29, 2010 at 10:38 AM, Jeff Cotter jcot...@voxns.com wrote: Thanks, I did read that but does not help. *From:* vccie2010 [mailto:vccie2...@gmail.com] *Sent:* Thursday, April 29, 2010 10:36 AM *To:* Jeff Cotter *Cc:* ccie_voice@onlinestudylist.com *Subject:* Re: [OSL | CCIE_Voice] UCM Personal Directory Error Try this out...might be helpful http://docs.google.com/viewer?a=vq=cache:tOqpVoOf8BUJ:www.ciscocertified.info/application/pdf/paws/109369/fix_issucorp.pdf+error+contact+system+administrator+cisco+cucm+personal+directoryhl=engl=uspid=blsrcid=ADGEEShqjNZGHmBt9hSwKO_HCeLklQZy6pPZALq1fZkTSsZNtw5H72r6eNU9lGBvuC-Y75srZ_TM9suBH4T1R7XFX9iWn6GDNZZn6eMIVdIFnIY7VAb3BOuIpSRNYF4YeAxx774MyES9sig=AHIEtbREtLDh9h3R-koPVhTUQxA0py0axg On Thu, Apr 29, 2010 at 10:05 AM, Jeff Cotter jcot...@voxns.com wrote: I get an “error contact system administrator” when I select Directories button than Personal Directory or Corporate Directory for that matter. (no ldap synchronization in place. Users have been added locally in UCM) I have the URL from PUB to IP address for all services under Enterprise Parameters, the phone service for personal directory is the default setting and is enabled. Phones are 7965s I can access the user web page and edit the PAB but can’t access from Phone. Looking for some direction on troubleshooting this. Thanks Jeff ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com 349.gif___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] IPMA and Intercom Line Labels
thx Mathew, that helps... On Thu, Apr 29, 2010 at 11:46 AM, Matthew Berry ciscovoiceg...@gmail.comwrote: It does still work. I don't have time to validate right now. However, the PG shows how to set this up without associating the intercom line. Good luck! *Matthew Berry* *A+, CCENT, CCNA, CCNA Voice, CCVP, CCIE Voice Written* *Vitals:* *GVoice: *+1.612.424.5044 *Gmail*: ciscovoiceg...@gmail.com *Skype*: ciscovoiceguru *Twitter*: ciscovoiceguru *Cert Stats:* Cisco Cert Journey Began: Jan 1, 2009 1st Lab Attempt: Aug 16, 2010 On 4/29/2010 1:45 PM, vccie2010 wrote: Mathew, If you don't define Intercom under Manager configs , does your intercom still work in IPMA mode while both Mgr and Asst are logged in? Could you please validate for us. thx On Thu, Apr 29, 2010 at 11:38 AM, Graham Hopkins ghopk...@wolf-rock.co.uk wrote: Matthew, thanks for that. Graham On 29 Apr 2010, at 19:34, Matthew Berry ciscovoiceg...@gmail.com wrote: Graham - This is what I noticed during that lab. Under the Manager/Assistant configuration screen there is the option to define intercom numbers. If you leave that drop-down field as Unassigned, when you login to IPMA the name will not change. However, if you specify an intercom in that field, the label will change. *Matthew Berry* *A+, CCENT, CCNA, CCNA Voice, CCVP, CCIE Voice Written* *Vitals:* *GVoice: *+1.612.424.5044 *Gmail*: ciscovoiceg...@gmail.com *Skype*: ciscovoiceguru *Twitter*: ciscovoiceguru *Cert Stats:* Cisco Cert Journey Began: Jan 1, 2009 1st Lab Attempt: Aug 16, 2010 On 4/29/2010 12:54 PM, Graham Hopkins wrote: Some of the labs show an extension - say 1080 and an intercom say *1080 as labels on the phone. When I tested IPMA with 7960s this is what I got. However have since started using some 7961s and the line label changes. When the assistant is logged out of the desktop app label reads *1080 when they are logged in it changes to manager. Setting labels manually in the line config doesn't seem to make any difference. Really wanted to know of this relates to the phone model or if there is some other setting I have overlooked? Obviously the name label is better for users but I guess it doesn't fulfil the the workbook requirement. Regards Graham Hopkins ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] NTP problem
PSTN RTR is NTP Master on EST - 5 HQ config - clock timezone PST -8 ntp source lo0 ntp server PSTN RTR IP HQ-RTR#sh ntp ass address ref clock st when poll reach delay offset disp *~10.10.100.2 127.127.7.1 4 564 377 2.02.78 0.0 * master (synced), # master (unsynced), + selected, - candidate, ~ configured HQ-RTR#s ntp st Clock is synchronized, stratum 5, reference is 10.10.100.2 nominal freq is 250. Hz, actual freq is 249. Hz, precision is 2**18 reference time is CF846F6D.9C13549E (12:49:49.609 PST Thu Apr 29 2010) clock offset is 2.7774 msec, root delay is 2.00 msec root dispersion is 2.82 msec, peer dispersion is 0.02 msec HQ-RTR#sh clo *12:50:11.431 PST Thu Apr 29 2010 ( this shows one hour behind ) ?* ** *How can I check the source interface used for NTP is loopback0 which in my case is 10.10.110.1 ???* any clues please ...thx ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Lab 2 8.3 VPIM
Perfect !!! That helps Vik. My wish list [?] Please add this in your next PG solution for l1b2 Q 8.3 thx once again... On Thu, Apr 29, 2010 at 1:14 PM, Vik Malhi vma...@ipexpert.com wrote: It’s not possible to send to remote user extension without specifying location id- spell the name instead or PDL. Thanks Sergio. -- Vik Malhi – CCIE #13890 Instructor - IPexpert, Inc. Mailto: *vma...@ipexpert.com *Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Live Assistance, Please visit: www.ipexpert.com/chat * http://www.ipexpert.com/chat* IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (RS, Voice, Security Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities *http://www.ipexpert.com/communities* and our public website at www.ipexpert.com *http://www.ipexpert.com/* -- *From: *vccie2010 vccie2...@gmail.com *Date: *Thu, 29 Apr 2010 10:23:11 -0700 *To: *Sergio Polizer spoli...@hotmail.com *Cc: *OSL Group ccie_voice@onlinestudylist.com *Subject: *Re: [OSL | CCIE_Voice] Lab 2 8.3 VPIM Thanks Sergio, I will try that and update. Vik, Otto or Amy ( anyone from IPX ) - what are your recommendation please ? thx for your help On Thu, Apr 29, 2010 at 6:45 AM, Sergio Polizer spoli...@hotmail.com wrote: Hi vccie2010, For UC side, while creating a new connection add the Local Extension what provides what are you looking for. From CUE side, I don't think that It is possibe. But the workaround is to create a Public Distribution List with the remote user number that you want to dial by number. Also, you have to add the remote user as a member of this PDL. : ) HTH, Sergio. -- Date: Wed, 28 Apr 2010 13:12:40 -0700 Subject: Re: [OSL | CCIE_Voice] Lab 2 8.3 VPIM From: vccie2...@gmail.com To: spoli...@hotmail.com CC: ccie_voice@onlinestudylist.com Sergio, I am trying to dial by extension and not name...will it work without adding remotes users on CUE and UC for each other ? On Sun, Apr 25, 2010 at 7:04 AM, Sergio Polizer spoli...@hotmail.com wrote: No, you can send vm addressing by name but You need to add remote user. CUE- remote username hqph1 location xxx / remote username hqph1 phonenumber 5001 UC- add remote user as Contacts. Tell us your configuration. Did you to try troubleshooting with: trace networking vpim all trace networking smtp all show trace buffer tail HTH, Sergio. -- Date: Sat, 24 Apr 2010 19:04:14 -0700 From: vccie2...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Lab 2 8.3 VPIM I am able to leave VM for Unity from BR2(CUE) but I have to dial Location ID plus the extension for HQ(Unity) , is it normal ? Also, can not leave msg from HQ to BR2, I am on IPX rack. any feedback will be helpful... -- Quer transformar suas fotos em emoticons para o Messenger? Clique aqui e veja como. http://ilm.windowslive.com.br/?ocid=ILM:ILM:Hotmail:Tagline:1x1:Tagline -- Cansado de entrar em todas as suas diferentes contas de email? Veja como juntar todas http://www.windowslive.com.br/public/tip.aspx/view/16?product=1ocid=Hotmail:MSN:Hotmail:Tagline:1x1:semLinha -- ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com 330.gif___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Link to CME 7.0 Admin Guide
Thanks Vik !!! On Thu, Apr 29, 2010 at 2:47 PM, Vik Malhi vma...@ipexpert.com wrote: You can download the CME Admin Guide for 7.0(1) here. http://files.me.com/malhiv/038s5t -- Vik Malhi – CCIE #13890 Instructor - IPexpert, Inc. Mailto: *vma...@ipexpert.com *Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Live Assistance, Please visit: www.ipexpert.com/chat * http://www.ipexpert.com/chat* IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (RS, Voice, Security Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities *http://www.ipexpert.com/communities* and our public website at www.ipexpert.com *http://www.ipexpert.com/* -- *From: *Angel Perez gorr...@hotmail.com *Date: *Thu, 29 Apr 2010 08:06:19 + *To: *vccie2...@gmail.com *Cc: *OSL Group ccie_voice@onlinestudylist.com *Subject: *Re: [OSL | CCIE_Voice] Link to CME 7.0 Admin Guide Sorry , yes you are right that one seem to be the only one available from doc cd... -- Date: Thu, 29 Apr 2010 00:58:52 -0700 Subject: Re: [OSL | CCIE_Voice] Link to CME 7.0 Admin Guide From: vccie2...@gmail.com To: gorr...@hotmail.com CC: ccie_voice@onlinestudylist.com I am looking for CME 7.0 please and not CUCM :) On Thu, Apr 29, 2010 at 12:55 AM, Angel Perez gorr...@hotmail.com wrote: Hi: from UCM gui web page click help and then contents -- Date: Thu, 29 Apr 2010 00:40:50 -0700 From: vccie2...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Link to CME 7.0 Admin Guide Pardon my ingnorance, can;t seem to get to the link for CME 7.0 Admin Guide. I am clikcing SupportConfigureProductsvocie and video comm IP Telephone Call Control CME Configration Guide CME Admin Guide ( but this Admin guide is 7.1 ) I am looking for CME 7.0 which I believe is the version in exam thx for ur help -- Hotmail: Trusted email with powerful SPAM protection. Sign up now. https://signup.live.com/signup.aspx?id=60969 -- Your E-mail and More On-the-Go. Get Windows Live Hotmail Free. Sign up now. https://signup.live.com/signup.aspx?id=60969 -- ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] ntp
PSTN RTR is NTP Master on EST - 5 HQ config - clock timezone PST -8 ntp source lo0 ntp server PSTN RTR IP HQ-RTR#sh ntp ass address ref clock st when poll reach delay offset disp *~10.10.100.2 127.127.7.1 4 564 377 2.02.78 0.0 * master (synced), # master (unsynced), + selected, - candidate, ~ configured HQ-RTR#s ntp st Clock is synchronized, stratum 5, reference is 10.10.100.2 nominal freq is 250. Hz, actual freq is 249. Hz, precision is 2**18 reference time is CF846F6D.9C13549E (12:49:49.609 PST Thu Apr 29 2010) clock offset is 2.7774 msec, root delay is 2.00 msec root dispersion is 2.82 msec, peer dispersion is 0.02 msec HQ-RTR#sh clo 12:50:11.431 PST Thu Apr 29 2010 ( this shows one hour behind ) ? How can I check the source interface used for NTP is loopback0 which in my case is 10.10.110.1 ??? any clues please ...thx ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] unable to upload CUE-CME license file - working on rack and need help ASAP
cue# $cue-vm-license_12mbx_cme_7.0.1.pkg username ipexpert pass cisco WARNING:: This command will install the necessary software to WARNING:: complete a clean install. It is recommended that a backup be done WARNING:: before installing software. Would you like to continue? [n]yes Downloading ftp cue-vm-license_12mbx_cme_7.0.1.pkg Error: Download error Can not download cue-vm-license_12mbx_cme_7.0.1.pkg error code 530 : error type 'Access denied: 530' cue# cue# cue# cue# cue# cue# cue# cue# cue# cue# cue# cue# cue# cue# cue# cue# cue# ping 10.10.210.5 PING 10.10.210.5 (10.10.210.5) 56(84) bytes of data. 64 bytes from 10.10.210.5: icmp_seq=1 ttl=126 time=6.05 ms 64 bytes from 10.10.210.5: icmp_seq=2 ttl=126 time=5.15 ms 64 bytes from 10.10.210.5: icmp_seq=3 ttl=126 time=5.27 ms 64 bytes from 10.10.210.5: icmp_seq=4 ttl=126 time=5.28 ms 64 bytes from 10.10.210.5: icmp_seq=5 ttl=126 time=6.54 ms --- 10.10.210.5 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 24ms rtt min/avg/max/mdev = 5.159/5.663/6.542/0.541 ms, ipg/ewma 6.084/5.879 ms cue# cue# cue# cue# cue# cue# ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] unable to upload CUE-CME license file - working on rack and need help ASAP
You are the man, Vik :) I wish I had tried that :( but I was just going by your email link here... http://www.mail-archive.com/ccie_voice@onlinestudylist.com/msg13105.html On Thu, Apr 29, 2010 at 4:59 PM, Vik Malhi vma...@ipexpert.com wrote: Can you try cisco/cisco -- Vik Malhi – CCIE #13890 Instructor - IPexpert, Inc. Mailto: *vma...@ipexpert.com *Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Live Assistance, Please visit: www.ipexpert.com/chat * http://www.ipexpert.com/chat* IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (RS, Voice, Security Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities *http://www.ipexpert.com/communities* and our public website at www.ipexpert.com *http://www.ipexpert.com/* -- *From: *vccie2010 vccie2...@gmail.com *Date: *Thu, 29 Apr 2010 16:56:46 -0700 *To: *OSL Group ccie_voice@onlinestudylist.com *Subject: *[OSL | CCIE_Voice] unable to upload CUE-CME license file - working on rack and need help ASAP cue# $cue-vm-license_12mbx_cme_7.0.1.pkg username ipexpert pass cisco WARNING:: This command will install the necessary software to WARNING:: complete a clean install. It is recommended that a backup be done WARNING:: before installing software. Would you like to continue? [n]yes Downloading ftp cue-vm-license_12mbx_cme_7.0.1.pkg Error: Download error Can not download cue-vm-license_12mbx_cme_7.0.1.pkg error code 530 : error type 'Access denied: 530' cue# cue# cue# cue# cue# cue# cue# cue# cue# cue# cue# cue# cue# cue# cue# cue# cue# ping 10.10.210.5 PING 10.10.210.5 (10.10.210.5) 56(84) bytes of data. 64 bytes from 10.10.210.5 http://10.10.210.5 : icmp_seq=1 ttl=126 time=6.05 ms 64 bytes from 10.10.210.5 http://10.10.210.5 : icmp_seq=2 ttl=126 time=5.15 ms 64 bytes from 10.10.210.5 http://10.10.210.5 : icmp_seq=3 ttl=126 time=5.27 ms 64 bytes from 10.10.210.5 http://10.10.210.5 : icmp_seq=4 ttl=126 time=5.28 ms 64 bytes from 10.10.210.5 http://10.10.210.5 : icmp_seq=5 ttl=126 time=6.54 ms --- 10.10.210.5 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 24ms rtt min/avg/max/mdev = 5.159/5.663/6.542/0.541 ms, ipg/ewma 6.084/5.879 ms cue# cue# cue# cue# cue# cue# -- ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Lab 2 8.3 VPIM
Sergio, This is what I get when trying to send VM from HQ to BR2 (Unity to CUE). when using PDL ... cue# sh trace buffer tail Press CTRL-C to exit... 8074 04/30 11:19:46.314 netw smtp 5 221 closing channel 5863 04/30 11:21:08.336 netw smtp 2 5863 04/30 11:21:08.364 netw smtp 3 socket hostName: 10.10.210.13, hostAddress: 10.10.210.13 5863 04/30 11:21:08.364 netw smtp 3 hostname: 10.10.210.13 found in good address cache 5863 04/30 11:21:08.366 netw smtp 1 8078 04/30 11:21:08.367 netw smtp 5 Initial connection message 8078 04/30 11:21:08.374 netw smtp 6 UNKNOWN: EHLO CUC7-Pub 8078 04/30 11:21:08.375 netw smtp 5 250-cue 8078 04/30 11:21:08.382 netw smtp 6 EHLO : MAIL FROM:5...@cuc7-pub 8078 04/30 11:21:08.400 netw smtp 5 554 5.1.8 Bad senders system address 8078 04/30 11:21:08.407 netw smtp 6 MAIL FROM:: QUIT 8078 04/30 11:21:08.407 netw smtp 5 221 closing channel == When dialing loc id plus ext 5863 04/30 11:24:22.303 netw smtp 1 8089 04/30 11:24:22.304 netw smtp 5 Initial connection message 8089 04/30 11:24:22.314 netw smtp 6 UNKNOWN: EHLO CUC7-Pub 8089 04/30 11:24:22.314 netw smtp 5 250-cue 8089 04/30 11:24:22.323 netw smtp 6 EHLO : MAIL FROM:5...@cuc7-pub 8089 04/30 11:24:22.342 netw smtp 5 554 5.1.8 Bad senders system address 8089 04/30 11:24:22.350 netw smtp 6 MAIL FROM:: QUIT 8089 04/30 11:24:22.351 netw smtp 5 221 closing channel Apprciate your help on this... On Sun, Apr 25, 2010 at 7:04 AM, Sergio Polizer spoli...@hotmail.comwrote: No, you can send vm addressing by name but You need to add remote user. CUE- remote username hqph1 location xxx / remote username hqph1 phonenumber 5001 UC- add remote user as Contacts. Tell us your configuration. Did you to try troubleshooting with: trace networking vpim all trace networking smtp all show trace buffer tail HTH, Sergio. -- Date: Sat, 24 Apr 2010 19:04:14 -0700 From: vccie2...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Lab 2 8.3 VPIM I am able to leave VM for Unity from BR2(CUE) but I have to dial Location ID plus the extension for HQ(Unity) , is it normal ? Also, can not leave msg from HQ to BR2, I am on IPX rack. any feedback will be helpful... -- Quer transformar suas fotos em emoticons para o Messenger? Clique aqui e veja como.http://ilm.windowslive.com.br/?ocid=ILM:ILM:Hotmail:Tagline:1x1:Tagline ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Lab 2 8.3 VPIM
Vik, That could be the case, I was just following the IPX PG solution which I believe needs lillte correction with regard to these things. - V On Thu, Apr 29, 2010 at 9:48 PM, Vik Malhi vma...@ipexpert.com wrote: So the domain name defined in the unity location within cue should be cuc7-pub. Is that the case? It must match the domain name of the sender. Vik Malhi - CCIE#13890 Senior Technical Instructor - IPexpert Inc Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: vma...@ipexpert.com Join IPexpert's Free CCIE Peer Groups Study Communities at www.IPexpert.com/communities http://www.ipexpert.com/communitieshttp://www.ipexpert.com/communities On Apr 29, 2010, at 8:25 PM, vccie2010 vccie2...@gmail.com wrote: Sergio, This is what I get when trying to send VM from HQ to BR2 (Unity to CUE). when using PDL ... cue# sh trace buffer tail Press CTRL-C to exit... 8074 04/30 11:19:46.314 netw smtp 5 221 closing channel 5863 04/30 11:21:08.336 netw smtp 2 5863 04/30 11:21:08.364 netw smtp 3 socket hostName: 10.10.210.13, hostAddress: 10.10.210.13 5863 04/30 11:21:08.364 netw smtp 3 hostname: 10.10.210.13 found in good address cache 5863 04/30 11:21:08.366 netw smtp 1 8078 04/30 11:21:08.367 netw smtp 5 Initial connection message 8078 04/30 11:21:08.374 netw smtp 6 UNKNOWN: EHLO CUC7-Pub 8078 04/30 11:21:08.375 netw smtp 5 250-cue 8078 04/30 11:21:08.382 netw smtp 6 EHLO : MAIL FROM:5...@cuc7-pub 8078 04/30 11:21:08.400 netw smtp 5 554 5.1.8 Bad senders system address 8078 04/30 11:21:08.407 netw smtp 6 MAIL FROM:: QUIT 8078 04/30 11:21:08.407 netw smtp 5 221 closing channel == When dialing loc id plus ext 5863 04/30 11:24:22.303 netw smtp 1 8089 04/30 11:24:22.304 netw smtp 5 Initial connection message 8089 04/30 11:24:22.314 netw smtp 6 UNKNOWN: EHLO CUC7-Pub 8089 04/30 11:24:22.314 netw smtp 5 250-cue 8089 04/30 11:24:22.323 netw smtp 6 EHLO : MAIL FROM:5...@cuc7-pub 8089 04/30 11:24:22.342 netw smtp 5 554 5.1.8 Bad senders system address 8089 04/30 11:24:22.350 netw smtp 6 MAIL FROM:: QUIT 8089 04/30 11:24:22.351 netw smtp 5 221 closing channel Apprciate your help on this... On Sun, Apr 25, 2010 at 7:04 AM, Sergio Polizer spoli...@hotmail.comwrote: No, you can send vm addressing by name but You need to add remote user. CUE- remote username hqph1 location xxx / remote username hqph1 phonenumber 5001 UC- add remote user as Contacts. Tell us your configuration. Did you to try troubleshooting with: trace networking vpim all trace networking smtp all show trace buffer tail HTH, Sergio. -- Date: Sat, 24 Apr 2010 19:04:14 -0700 From: vccie2...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Lab 2 8.3 VPIM I am able to leave VM for Unity from BR2(CUE) but I have to dial Location ID plus the extension for HQ(Unity) , is it normal ? Also, can not leave msg from HQ to BR2, I am on IPX rack. any feedback will be helpful... -- Quer transformar suas fotos em emoticons para o Messenger? Clique aqui e veja como.http://ilm.windowslive.com.br/?ocid=ILM:ILM:Hotmail:Tagline:1x1:Tagline ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Q 5.2 Vol2 Lab 3
You are absolutely right - as they say RULE NO 1 - 'BOSS IS ALWAY RIGHT RULE No 2 IF BOSS IS WRONG, SEE RULE NO 1:) I got lost in wordiing between per phone vs per port... On Tue, Apr 27, 2010 at 4:59 PM, Vik Malhi vma...@ipexpert.com wrote: We are applying a policer on the physical port of the phone. Can you help me out by telling me why you are not expecting this to be the correct solution? *Modify the policy-map *policy-map AutoQoS-Police-CiscoPhone class AutoQoS-VoIP-RTP-Trust set dscp ef * police 96000 8000 exceed-action policed-dscp-transmit *class AutoQoS-VoIP-Control-Trust set dscp cs3 * police 32000 8000 exceed-action policed-dscp-transmit * *Check the policed-dscp values *HQ-3750(config-pmap-c)#do sh run | i policed-dscp *mls qos map policed-dscp 24 26 46 to 0 * -- Vik Malhi – CCIE #13890 Instructor - IPexpert, Inc. Mailto: *vma...@ipexpert.com *Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Live Assistance, Please visit: www.ipexpert.com/chat * http://www.ipexpert.com/chat* IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (RS, Voice, Security Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities *http://www.ipexpert.com/communities* and our public website at www.ipexpert.com *http://www.ipexpert.com/* *From: *vccie2010 vccie2...@gmail.com *Date: *Mon, 26 Apr 2010 23:37:12 -0700 *To: *OSL Group ccie_voice@onlinestudylist.com *Subject: *[OSL | CCIE_Voice] Q 5.2 Vol2 Lab 3 -Question says RTP and SCCP traffic from each phone be policed. But the solution does not provide the right solution it seems, will we not be using Microflow in this case or am I wrong or missing anything on this please. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Lab 2 8.3 VPIM
Sergio, I am trying to dial by extension and not name...will it work without adding remotes users on CUE and UC for each other ? On Sun, Apr 25, 2010 at 7:04 AM, Sergio Polizer spoli...@hotmail.comwrote: No, you can send vm addressing by name but You need to add remote user. CUE- remote username hqph1 location xxx / remote username hqph1 phonenumber 5001 UC- add remote user as Contacts. Tell us your configuration. Did you to try troubleshooting with: trace networking vpim all trace networking smtp all show trace buffer tail HTH, Sergio. -- Date: Sat, 24 Apr 2010 19:04:14 -0700 From: vccie2...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Lab 2 8.3 VPIM I am able to leave VM for Unity from BR2(CUE) but I have to dial Location ID plus the extension for HQ(Unity) , is it normal ? Also, can not leave msg from HQ to BR2, I am on IPX rack. any feedback will be helpful... -- Quer transformar suas fotos em emoticons para o Messenger? Clique aqui e veja como.http://ilm.windowslive.com.br/?ocid=ILM:ILM:Hotmail:Tagline:1x1:Tagline ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] IPX - please help.....Trying to donwload my config files and getting error An Error has occured while processing your request
CCIE Voice Version 6 (CCIE v3 BP) Volume 1, Configs and Diagramshttps://www.ipexpert.com/member/downloads# 1. CCIE Voice: BLS Volume 1, Config Files, v6https://www.ipexpert.com/member/downloads/?legacy=truefid=2480 An Error has occured while processing your request ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Lab 2 8.3 VPIM
Hello Sergio, my appologies I forgot to save my configs but for sure, I just followed the solution given by IPX and in that solution it does not mention about what you told. May I request IPX to commnet on my questions pls... = I am able to leave VM for Unity from BR2(CUE) but I have to dial Location ID plus the extension for HQ(Unity) , is it normal ? Also, can not leave msg from HQ to BR2, I wason IPX rack... === On Sun, Apr 25, 2010 at 7:04 AM, Sergio Polizer spoli...@hotmail.comwrote: No, you can send vm addressing by name but You need to add remote user. CUE- remote username hqph1 location xxx / remote username hqph1 phonenumber 5001 UC- add remote user as Contacts. Tell us your configuration. Did you to try troubleshooting with: trace networking vpim all trace networking smtp all show trace buffer tail HTH, Sergio. -- Date: Sat, 24 Apr 2010 19:04:14 -0700 From: vccie2...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Lab 2 8.3 VPIM I am able to leave VM for Unity from BR2(CUE) but I have to dial Location ID plus the extension for HQ(Unity) , is it normal ? Also, can not leave msg from HQ to BR2, I am on IPX rack. any feedback will be helpful... -- Quer transformar suas fotos em emoticons para o Messenger? Clique aqui e veja como.http://ilm.windowslive.com.br/?ocid=ILM:ILM:Hotmail:Tagline:1x1:Tagline ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Vol 2 Lab 2 5.1 Gatekeeper Bandwidth
Do you have CCM SP's BRQ Enabled set to True and Intra-region Codec to G729 On Mon, Apr 26, 2010 at 8:16 AM, Graham Hopkins ghopk...@wolf-rock.co.ukwrote: I have all calls working from HQ/BR1 to BR2 and from BR2 to HQ/BR1, the SCCP phones use G.729 and the SIP phones at BR2 G.711 transcoding is invoked both at BR2 when a SIP phone is involved. However calls to BR2 appear as 16 Kbps in the gatekeeper as per the question calls from BR2 appear as 128Kbps in the gatekeeper, even when the SSCP phones at each end show G.729 and no transcoding is in use. Any ideas ? How does the gatekeeper derive this bandwidth, is it taken from a setup request even if a lower speed codec is then negotiated ? Regards Graham Hopkins ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] Lab 2 8.3 VPIM
I am able to leave VM for Unity from BR2(CUE) but I have to dial Location ID plus the extension for HQ(Unity) , is it normal ? Also, can not leave msg from HQ to BR2, I am on IPX rack. any feedback will be helpful... ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] MWI Issues resolved - Might help CCIETALK
Hello Marcio, I don't see Phone System under User Configuration, are you talking other way round as I do see User associated under Phone Syetem ? 2010/4/24 Márcio Reesink marciorees...@hotmail.com Check also Phone System under the user configuration. Users might be applied to the wrong phone system, in this case, voicemail still working but MWI doesn't. -- Marcio Reesink Date: Fri, 23 Apr 2010 18:59:33 -0400 From: cciet...@gmail.com To: ciscovoiceg...@gmail.com; ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] MWI Issues resolved - Might help CCIETALK Great! Will try On 4/23/10, Matthew Berry ciscovoiceg...@gmail.com wrote: Hello - I have been having MWI issues with CUC. Basically, the MWI light does not turn on. CCIETalk had the same (or similar) problem. Today, I was able to reproduce the issue and verify that my fix worked. Basically, once you activate the AXL service on CUC and start it, it crashes after 5-10 seconds. This is enough time for you to click away from the page and start configuring other things. When MWI does not work in my case, it is because the AXL service on CUC is down and cannot communicate with CUCM. The only fix I have found is to reboot the CUC server after activating the service. Once the server comes back up, MWI works perfectly and the service stays up. Hopefully this helps a few people out there. -- *Matthew Berry* /A+, CCENT, CCNA, CCNA Voice, CCVP, CCIE Voice Written/ *_Vitals:_* *GVoice: *+1.612.424.5044 *Gmail*: ciscovoiceg...@gmail.com *Skype*: ciscovoiceguru *Twitter*: ciscovoiceguru *_Cert Stats:_* Cisco Cert Journey Began: Jan 1, 2009 1st Lab Attempt: Aug 16, 2010 -- Sent from my mobile device www.ccietalk.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com -- Your E-mail and More On-the-Go. Get Windows Live Hotmail Free. Sign up now. https://signup.live.com/signup.aspx?id=60969 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] cBarge on CME not working - says message Failed to setup barge
cBarge on CME - - eph-dn octoline - conf hardware in telephony service - privacy off on ephone to be bacrged into - ephon-temp remote-in-use to have cBArge key - apply eph-temp to eph Error message says message Failed to setup barge ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] cBarge on CME not working - says messageFailed to setup barge
Jeff, I tried with that too but no luck. On Thu, Apr 22, 2010 at 9:01 AM, Jeff Price (jeffpric) jeffp...@cisco.comwrote: You also need to configure some ad-hoc conference ephone-dn(s). Then this should work. Jeff *From:* ccie_voice-boun...@onlinestudylist.com [mailto: ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *vccie2010 *Sent:* Thursday, April 22, 2010 8:29 AM *To:* ccie_voice@onlinestudylist.com *Subject:* [OSL | CCIE_Voice] cBarge on CME not working - says messageFailed to setup barge cBarge on CME - - eph-dn octoline - conf hardware in telephony service - privacy off on ephone to be bacrged into - ephon-temp remote-in-use to have cBArge key - apply eph-temp to eph Error message says message Failed to setup barge ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] cBarge on CME not working - says messageFailed to setup barge
yuppI will lab it again and update here. On Thu, Apr 22, 2010 at 9:53 AM, ccieid1ot ccieid...@gmail.com wrote: SDSPfarm registered? On Thu, Apr 22, 2010 at 11:24 AM, vccie2010 vccie2...@gmail.com wrote: Jeff, I tried with that too but no luck. On Thu, Apr 22, 2010 at 9:01 AM, Jeff Price (jeffpric) jeffp...@cisco.com wrote: You also need to configure some ad-hoc conference ephone-dn(s). Then this should work. Jeff From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of vccie2010 Sent: Thursday, April 22, 2010 8:29 AM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] cBarge on CME not working - says messageFailed to setup barge cBarge on CME - - eph-dn octoline - conf hardware in telephony service - privacy off on ephone to be bacrged into - ephon-temp remote-in-use to have cBArge key - apply eph-temp to eph Error message says message Failed to setup barge ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] voice class codec
Region between BR1 and HQ is G729, calls from PSTN into BR1(h323 gw) and then into CUCM. voice class codec 1 codec preference 1 g711ulaw codec 2 preference g729r8 wondering why the first prefence be codec g711ulaw instead of g729r8 which should be the priority ??? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] voice class codec
Thanks Amy for your reply. On Mon, Apr 19, 2010 at 5:24 PM, Amy Ryan ar...@ipexpert.com wrote: In this case, the BR1 gateway will be sending inbound calls to local devices and Intra-site calling has the preferred codec of g711ulaw. A scenario where the g729 codec might be used is in the case of TEHO routing where the HQ site may be sending calls across the wan and out the BR1 sites’ PSTN. --- Amy Ryan – CCIE #24677 (Voice) Technical Instructor - IPexpert, Inc. Mailto: *ar...@ipexpert.com *Telephone: +1.810.326.1444 Live Assistance, Please visit: www.ipexpert.com/chat * http://www.ipexpert.com/chat* eFax: +1.810.454.0130 IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (RS, Voice, Security Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities *http://www.ipexpert.com/communities* and our public website at www.ipexpert.com *http://www.ipexpert.com/* -- *From: *vccie2010 vccie2...@gmail.com *Date: *Mon, 19 Apr 2010 16:20:46 -0700 *To: *ccie_voice@onlinestudylist.com *Subject: *[OSL | CCIE_Voice] voice class codec Region between BR1 and HQ is G729, calls from PSTN into BR1(h323 gw) and then into CUCM. voice class codec 1 codec preference 1 g711ulaw codec 2 preference g729r8 wondering why the first prefence be codec g711ulaw instead of g729r8 which should be the priority ??? -- ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] CCX NTP
Try this ... http://docs.google.com/viewer?a=vq=cache:OwhhDwCTWvUJ:www.ciscointernethome.net/application/pdf/paws/21003/NTP.pdf+setting+ntp+on+cisco+unityhl=engl=uspid=blsrcid=ADGEEShBypdSUSMrKB7TKj1CYAmkFmcjyAtpdPjeUGZ8uK-Ra5U5isoPjUfbD0WCUISmYqyAk520lxEcl1n3aQDe9MsMUzb6yQGyLsO7K8N-vhGCnnxi86Lw7hrjfK--RQvQpQI5PwnYsig=AHIEtbQlYWpEQBlE6qGVycOxLi3Y-9hUFw On Fri, Apr 9, 2010 at 4:48 AM, Angel Perez gorr...@hotmail.com wrote: Hi: I've configured NTP (hq router) at CCX Cisco Unified CM Configuration page, but doing some tests with time of day script option show me that the script was taken the time from windows clock... Is this correct? How can I verify that CCX takes the time from the NTP and that it is synch wit it? Thanks -- Windows Live Hotmail: Your friends can get your Facebook updates, right from Hotmail®.http://www.microsoft.com/middleeast/windows/windowslive/see-it-in-action/social-network-basics.aspx?ocid=PID23461::T:WLMTAGL:ON:WL:en-xm:SI_SB_4:092009 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] Codec command in voice register pool
Is it MUST to give codec g711ulaw voice register pool , if we don't give what to do we break pls ??? thanks for your help... -M ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] Lab 13A : CUPC Deskphone mode not working and CUPC shows Connection(Limited)
I am doing Lab 13A : CUPC Deskphone mode not working and CUPC shows Connection(Limited). I have followed the steps in verbatim. I am labbing it on IPX remote laba nd have CUPC on my laptop. I use SW VPN. Am I missing something here or is it becoz of VPN. thanks for your help... -M ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Lab 13A : CUPC Deskphone mode not working and CUPC shows Connection(Limited)
I do have this CTI Gateway under User Settings to the HQ-TCP but still no luck :) On Thu, Apr 8, 2010 at 8:26 PM, Roger Henderson rhender...@gmail.comwrote: Try setting the CTI Gateway under User Settings to the HQ-TCP one (I think) on the Presence server. That's needed to get softphone mode going, so it's worth a try. It's definitely not the VPN that's breaking things - I use the VPN often. On Fri, Apr 9, 2010 at 2:16 PM, vccie2010 vccie2...@gmail.com wrote: I am doing Lab 13A : CUPC Deskphone mode not working and CUPC shows Connection(Limited). I have followed the steps in verbatim. I am labbing it on IPX remote laba nd have CUPC on my laptop. I use SW VPN. Am I missing something here or is it becoz of VPN. thanks for your help... -M ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on HQ3750 SW...can not browse into CUCM
I am in middle of the session on Proctor labs... I am getting %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on FastEthernet1/0/4 (not half duplex), with CUC7-Pub eth0 (half duplex). on HQ 3750 Switch. I can ping 10.10.210.10 CUCM but can't web browse into it. Any help will be highly appreciated. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Vol 2 Q5.1
Got it, Thanks Otto for your response. On Sat, Feb 13, 2010 at 10:30 AM, Otto Sanchez o...@ipexpert.com wrote: Hi, I'd say yes if the negotiated codec between the gw and ucm is g.729r8 (default codec for the dial peer), so make sure the gw is using that codec when talking to ucm or at least it's in the list for the voice class codec used by the dial peer, Thanks, On Wed, Feb 10, 2010 at 2:07 PM, vccie2010 vccie2...@gmail.com wrote: Per the PG solutions the dspfarm profile 1 transcode does not show codec g729r8 it only shows g279ar8 and g729abr8 don't we need codec G729r8 statement here since the traffic coming from UCM across GK will be G729r8 ??? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com -- Regards, Otto Sanchez CCIE #25592 (Voice) Support Engineer - IPexpert, Inc. URL: http://www.IPexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Vol 1 Lab 5A Task 5.2 - Cannot reach the number display
I hope you tried Reset DP and last resort CCM service too ? On Fri, Feb 12, 2010 at 8:50 AM, Steve Denney (stdenney) stden...@cisco.com wrote: Racking my brains a bit over this one... Trying to place a call from BR1 Ph2 (SCCP IP Blue) to 911 (PSTN phone). Getting a fast busy and this display on the phone: “Cannot reach the number”. Calls from HQ Ph2 (SIP CICP) to 911 work fine – so I know the CUCM route pattern for 911 is working. Also, getting the secondary dial tone when the 9 is dialed from BR1 Ph2 – so the phone is definitely hitting the route pattern. The call just never seems to reach the BR1 MGCP gateway. 911 Route Pattern (None partition) points to rl-local-gw, which points to Standard Local Route Group. Device Pool BR1 is configured to use Local Route Group of rg-br1. Route group rg-br1 has the proper GW selected (S0/SU0/ ds...@br-rtr.proctorlabs.com). BR1 GW is cleanly registered to CUCM, with multiple_frame_established. Have bounced no mgcp / mgcp on BR1 GW, and have reset the phone and route list, multiple times. There are no other route patterns configured which could be conflicting. Any thoughts? thx, sd ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] HQBR2CUE getting fast busy
HQBR2CUE getting fast busy CUE is inte to CCM, it works when the region between HQ and BR2 is setup as G711. I do have transcodes reg and in MRGL of HQ and BR2. Hq mrgl has tran config on hq router and br2 mrgl has tran config on br2 router. CUE CTI RP and Ports are in BR2 DP. Any clue pls? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] Can't call out from BR1 phone in SIP SRST
Can't call out from BR1 phone in SIP SRST but I can call into it. When I dial from SIP phone in SRST the moment I press dial softkey I hangs up and if I press speaker phone and dial the first digit it hangs up. Here si the config for SIP SRST pls... voice service voip allow-connections h323 to h323 allow-connections h323 to sip allow-connections sip to h323 allow-connections sip to sip fax protocol cisco sip bind control source-interface FastEthernet0/0.21 bind media source-interface FastEthernet0/0.21 registrar server voice register global max-dn 1 max-pool 1 ! voice register pool 1 id network 177.2.11.0 mask 255.255.255.0 application sip.app dtmf-relay rtp-nte sip-notify call-forward b2bua busy 2220 call-forward b2bua noan 0 timeout 6 codec g711ulaw ! am i missing somehting here pls ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Vol 1 Lab 5A Task 5.2 - Cannot reach the number display
Can you pls post the debug isdn q931 output here to further troubleshoot it. On Fri, Feb 12, 2010 at 8:50 AM, Steve Denney (stdenney) stden...@cisco.com wrote: Racking my brains a bit over this one... Trying to place a call from BR1 Ph2 (SCCP IP Blue) to 911 (PSTN phone). Getting a fast busy and this display on the phone: “Cannot reach the number”. Calls from HQ Ph2 (SIP CICP) to 911 work fine – so I know the CUCM route pattern for 911 is working. Also, getting the secondary dial tone when the 9 is dialed from BR1 Ph2 – so the phone is definitely hitting the route pattern. The call just never seems to reach the BR1 MGCP gateway. 911 Route Pattern (None partition) points to rl-local-gw, which points to Standard Local Route Group. Device Pool BR1 is configured to use Local Route Group of rg-br1. Route group rg-br1 has the proper GW selected (S0/SU0/ ds...@br-rtr.proctorlabs.com). BR1 GW is cleanly registered to CUCM, with multiple_frame_established. Have bounced no mgcp / mgcp on BR1 GW, and have reset the phone and route list, multiple times. There are no other route patterns configured which could be conflicting. Any thoughts? thx, sd ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] Vol 2 Q5.1
Per the PG solutions the dspfarm profile 1 transcode does not show codec g729r8 it only shows g279ar8 and g729abr8 don't we need codec G729r8 statement here since the traffic coming from UCM across GK will be G729r8 ??? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] SRST on BR2 not working
Hi My BR2 site phones don't fall back to SRST. call-manager-fallback max-conferences 8 gain -6 transfer-system full-consult ip source-address fa voice subinterface port 2000 max-ephones 10 max-dn 5 dual-line voicemail 3600 call-forward pattern .T call-forward busy 3600 call-forward noan 3600 timeout 10 mwi relay sip-ua mwi-server ipv4:cue IP addr expires 3600 port 5060 transport udp unoslicited Am I missing anythign here pls... -ak ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] SRST on BR2 not working
Yes Dave , I tried with both SRST ref and Default GW in DP. I am running on 2811 router. the GW is configured as H323 on CCM c2800nm-adventerprisek9_ivs_li-mz.124-24.T2http://us.mc379.mail.yahoo.com/mc/showMessage?sMid=1filterBy=.rand=1853473932midIndex=1mid=1_22114036_AKRbv9EAAJs9S3DvGgN%2B%2FH4k0v8 On Mon, Feb 8, 2010 at 9:18 PM, David Wagner unifiedd...@gmail.com wrote: Did you check your SRST reference in CUCM? Dave On Feb 8, 2010, at 11:08 PM, vccie2010 wrote: Hi My BR2 site phones don't fall back to SRST. call-manager-fallback max-conferences 8 gain -6 transfer-system full-consult ip source-address fa voice subinterface port 2000 max-ephones 10 max-dn 5 dual-line voicemail 3600 call-forward pattern .T call-forward busy 3600 call-forward noan 3600 timeout 10 mwi relay sip-ua mwi-server ipv4:cue IP addr expires 3600 port 5060 transport udp unoslicited Am I missing anythign here pls... -ak ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] SRST on BR2 not working
Dave, Here is the SRST related config, do you need the comlete GW configs pls... call-manager-fallback max-conferences 8 gain -6 transfer-system full-consult ip source-address fa voice subinterface port 2000 max-ephones 10 max-dn 5 dual-line voicemail 3600 call-forward pattern .T call-forward busy 3600 call-forward noan 3600 timeout 10 mwi relay sip-ua mwi-server ipv4:cue IP addr expires 3600 port 5060 transport udp unoslicited -ak On Mon, Feb 8, 2010 at 9:08 PM, vccie2010 vccie2...@gmail.com wrote: Hi My BR2 site phones don't fall back to SRST. call-manager-fallback max-conferences 8 gain -6 transfer-system full-consult ip source-address fa voice subinterface port 2000 max-ephones 10 max-dn 5 dual-line voicemail 3600 call-forward pattern .T call-forward busy 3600 call-forward noan 3600 timeout 10 mwi relay sip-ua mwi-server ipv4:cue IP addr expires 3600 port 5060 transport udp unoslicited Am I missing anythign here pls... -ak ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] SRST on BR2 not working
yes pls...I do have that. On Mon, Feb 8, 2010 at 9:40 PM, David Wagner unifiedd...@gmail.com wrote: Do you have Application Global Service alternate default In the config ? Dave On Feb 8, 2010, at 11:34 PM, vccie2010 wrote: Dave, Here is the SRST related config, do you need the comlete GW configs pls... call-manager-fallback max-conferences 8 gain -6 transfer-system full-consult ip source-address fa voice subinterface port 2000 max-ephones 10 max-dn 5 dual-line voicemail 3600 call-forward pattern .T call-forward busy 3600 call-forward noan 3600 timeout 10 mwi relay sip-ua mwi-server ipv4:cue IP addr expires 3600 port 5060 transport udp unoslicited -ak On Mon, Feb 8, 2010 at 9:08 PM, vccie2010 vccie2...@gmail.com wrote: Hi My BR2 site phones don't fall back to SRST. call-manager-fallback max-conferences 8 gain -6 transfer-system full-consult ip source-address fa voice subinterface port 2000 max-ephones 10 max-dn 5 dual-line voicemail 3600 call-forward pattern .T call-forward busy 3600 call-forward noan 3600 timeout 10 mwi relay sip-ua mwi-server ipv4:cue IP addr expires 3600 port 5060 transport udp unoslicited Am I missing anythign here pls... -ak ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] SRST on BR2 not working
Sorry Dave, I am away from lab now but can definately send it tomo when I lab again. My phones at BR2 site are in same subnet as fa0/0. voice on BR2 site so should be able to see it right On Mon, Feb 8, 2010 at 9:44 PM, David Wagner unifiedd...@gmail.com wrote: Can you post the whole config? I asume you can ping the source interface you are using from the phones subnet? Dave On Feb 8, 2010, at 11:43 PM, vccie2010 wrote: yes pls...I do have that. On Mon, Feb 8, 2010 at 9:40 PM, David Wagner unifiedd...@gmail.comwrote: Do you have Application Global Service alternate default In the config ? Dave On Feb 8, 2010, at 11:34 PM, vccie2010 wrote: Dave, Here is the SRST related config, do you need the comlete GW configs pls... call-manager-fallback max-conferences 8 gain -6 transfer-system full-consult ip source-address fa voice subinterface port 2000 max-ephones 10 max-dn 5 dual-line voicemail 3600 call-forward pattern .T call-forward busy 3600 call-forward noan 3600 timeout 10 mwi relay sip-ua mwi-server ipv4:cue IP addr expires 3600 port 5060 transport udp unoslicited -ak On Mon, Feb 8, 2010 at 9:08 PM, vccie2010 vccie2...@gmail.com wrote: Hi My BR2 site phones don't fall back to SRST. call-manager-fallback max-conferences 8 gain -6 transfer-system full-consult ip source-address fa voice subinterface port 2000 max-ephones 10 max-dn 5 dual-line voicemail 3600 call-forward pattern .T call-forward busy 3600 call-forward noan 3600 timeout 10 mwi relay sip-ua mwi-server ipv4:cue IP addr expires 3600 port 5060 transport udp unoslicited Am I missing anythign here pls... -ak ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] SRST on BR2 not working
Just a quick one though, I have CME files on BR2 site since it was for CME site. But I beleive we can still run SRST on it since it is taking call-manager-fallback commands ??? On Mon, Feb 8, 2010 at 9:44 PM, David Wagner unifiedd...@gmail.com wrote: Can you post the whole config? I asume you can ping the source interface you are using from the phones subnet? Dave On Feb 8, 2010, at 11:43 PM, vccie2010 wrote: yes pls...I do have that. On Mon, Feb 8, 2010 at 9:40 PM, David Wagner unifiedd...@gmail.comwrote: Do you have Application Global Service alternate default In the config ? Dave On Feb 8, 2010, at 11:34 PM, vccie2010 wrote: Dave, Here is the SRST related config, do you need the comlete GW configs pls... call-manager-fallback max-conferences 8 gain -6 transfer-system full-consult ip source-address fa voice subinterface port 2000 max-ephones 10 max-dn 5 dual-line voicemail 3600 call-forward pattern .T call-forward busy 3600 call-forward noan 3600 timeout 10 mwi relay sip-ua mwi-server ipv4:cue IP addr expires 3600 port 5060 transport udp unoslicited -ak On Mon, Feb 8, 2010 at 9:08 PM, vccie2010 vccie2...@gmail.com wrote: Hi My BR2 site phones don't fall back to SRST. call-manager-fallback max-conferences 8 gain -6 transfer-system full-consult ip source-address fa voice subinterface port 2000 max-ephones 10 max-dn 5 dual-line voicemail 3600 call-forward pattern .T call-forward busy 3600 call-forward noan 3600 timeout 10 mwi relay sip-ua mwi-server ipv4:cue IP addr expires 3600 port 5060 transport udp unoslicited Am I missing anythign here pls... -ak ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] CUPS 7X - CUPC functionality questions please
Will appreciate if someone had done it before or can shed some light on this- I need to configure CUPC client / Desk Phone for Voice, Video, IM and email. My understnading /Qs are : 1. Have AD integration with CUCM 7X 2. Have MS Exchange - where it's to be integrated into CUPC ? 3. For IM what all needs to be done ? 4. For Video I understand I will need VT adavantage camera with phone ? Or any thing else I am missing here basically I am looking for an overview of integrations of above items to make voice, video, IM and email work from CUPC. Thanks // AK ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] MOH from Flash
HI Otto, So in which scenario I will be using 239.1.1.3:16384 on SiteB router please ? Thanks // AK On Tue, Jan 26, 2010 at 12:22 PM, Otto Sanchez o...@ipexpert.com wrote: Hi, The branch router will always multicast moh in g.711 format from the flash. So, branch phones should be configured to hear the 239.1.1.1 port 16384 and not 239.1.1.3:16384 and codec g.729 (this is a not supported configuration) when they are put on hold. How do you guarantee your branch phones will tune 239.1.1.1:16384 in g.711 format and still be able to communicate with other sites using g.729?. Well that's when the g.711 region/DP show up, configure a region such as the codec relationship with any other region is g.711, assign this region to a new DP and then assign that DP to the MOH server configured for the siteB DP MRGL-MRG, I still trying to find a reason why you will need to stream g.729 from the router flash in this scenario, you might want to do that if the moh streaming is coming from the hq site, There's a very good document about this feature, I reference it just in case you haven't take a look at it, http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cusrst/admin/srst/configuration/guide/srs_moh.html HTH, On Mon, Jan 25, 2010 at 8:03 PM, vccie2010 vccie2...@gmail.com wrote: Thanks Otto for yoru kind reponse, so let me put the question otherway , what should I do on the UCM and SiteB router if I was to use MOH from flash and it shd be G729. Is this scenario possible please as we say on SiteB router the IP address will be 239.1.1.3 and I think in this case all the configs on UCM remain same, right pls? 2010/1/25 Otto Sanchez o...@ipexpert.com Hi, The only format supported by the moh file is g.711, you should also take care of the multicast ip address numbering to make it match to a g.711 moh streaming not g.729, BR, ,2010/1/22 Roger Källberg roger.kallb...@cygate.se As far as I know you need to have the file(s) in the correct format in flash, ie G729 if you want to use that for your MOH or G711U if that's what you want. Vik please correct me if I'm wrong. Brgds, *Roger Källberg* Consultant Cygate AB -- *Från:* vccie2010 [vccie2...@gmail.com] *Skickat:* den 22 januari 2010 04:18 *Till:* Vik Malhi *Kopia:* OSL Group *Ämne:* Re: [OSL | CCIE_Voice] MOH from Flash Also Vik, is it must to have MOH flash file in G729 format if I need to have G729 MOH from flash ??? I am confused here...Could you please help me here. On Wed, Jan 20, 2010 at 9:41 PM, vccie2010 vccie2...@gmail.com wrote: I was trying to test MOH from flash on BR1. G711 MOH works fine butI am having problem when trying config and test G729. You said There should be no reason why you can’t play a g729 file from the flash if you have a music file in that format on the flash ..so does it mean I need to have MOH file shd be in G729 format so that the MOH from flash is G729 MOH, right ? On Wed, Jan 20, 2010 at 8:51 PM, Vik Malhi vma...@ipexpert.comwrote: I’m not fully understanding the scenario. When you press hold from a PSTN phone then you are not testing your MOH settings. Can you confirm? When you are sourcing from the BR1 flash I would guess you would ALWAYS want it to be g711 since it is now local to the BR1 site. That’s one of the main reasons for doing this- we can play g711 music without any bandwidth being tied up. There should be no reason why you can’t play a g729 file from the flash if you have a music file in that format on the flash and you use the multicast moh 239.1.1.3 port 16384 route favoicesubinterface IP Add lo0 IP Addr command and increment on ip address on the UCM, use a single server (the one which has the base multicast ip of 239.1.1.1) and audio source 1. -- Vik Malhi – CCIE #13890 Instructor - IPexpert, Inc. Mailto: *vma...@ipexpert.com *Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Live Assistance, Please visit: www.ipexpert.com/chat * http://www.ipexpert.com/chat* IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA (RS, Voice Security), CCNP, CCVP, CCSP and CCIE (RS, Voice, Security Service Provider) Certification Training with locations throughout the United States, Europe and Australia. Be sure to check out our online communities at www.ipexpert.com/communities * http://www.ipexpert.com/communities* and our public website at www.ipexpert.com *http://www.ipexpert.com* . -- *From: *vccie2010 vccie2...@gmail.com *Date: *Wed, 20 Jan 2010 20:22:50 -0800 *To: *OSL Group ccie_voice@onlinestudylist.com *Subject: *Re: [OSL | CCIE_Voice] MOH from Flash Vik, so you mean whether we want G729 MOH or G711MOH to be played on BR1 from flash we should ALWAYS place MOH server in G711only. I did that and with that G711 MOH works perfectly fine when I put either HQ phone or PSTN phone on hold. But I am having problem work
Re: [OSL | CCIE_Voice] MOH from Flash
Thanks Otto for yoru kind reponse, so let me put the question otherway , what should I do on the UCM and SiteB router if I was to use MOH from flash and it shd be G729. Is this scenario possible please as we say on SiteB router the IP address will be 239.1.1.3 and I think in this case all the configs on UCM remain same, right pls? 2010/1/25 Otto Sanchez o...@ipexpert.com Hi, The only format supported by the moh file is g.711, you should also take care of the multicast ip address numbering to make it match to a g.711 moh streaming not g.729, BR, ,2010/1/22 Roger Källberg roger.kallb...@cygate.se As far as I know you need to have the file(s) in the correct format in flash, ie G729 if you want to use that for your MOH or G711U if that's what you want. Vik please correct me if I'm wrong. Brgds, *Roger Källberg* Consultant Cygate AB -- *Från:* vccie2010 [vccie2...@gmail.com] *Skickat:* den 22 januari 2010 04:18 *Till:* Vik Malhi *Kopia:* OSL Group *Ämne:* Re: [OSL | CCIE_Voice] MOH from Flash Also Vik, is it must to have MOH flash file in G729 format if I need to have G729 MOH from flash ??? I am confused here...Could you please help me here. On Wed, Jan 20, 2010 at 9:41 PM, vccie2010 vccie2...@gmail.com wrote: I was trying to test MOH from flash on BR1. G711 MOH works fine butI am having problem when trying config and test G729. You said There should be no reason why you can’t play a g729 file from the flash if you have a music file in that format on the flash ..so does it mean I need to have MOH file shd be in G729 format so that the MOH from flash is G729 MOH, right ? On Wed, Jan 20, 2010 at 8:51 PM, Vik Malhi vma...@ipexpert.com wrote: I’m not fully understanding the scenario. When you press hold from a PSTN phone then you are not testing your MOH settings. Can you confirm? When you are sourcing from the BR1 flash I would guess you would ALWAYS want it to be g711 since it is now local to the BR1 site. That’s one of the main reasons for doing this- we can play g711 music without any bandwidth being tied up. There should be no reason why you can’t play a g729 file from the flash if you have a music file in that format on the flash and you use the multicast moh 239.1.1.3 port 16384 route favoicesubinterface IP Add lo0 IP Addr command and increment on ip address on the UCM, use a single server (the one which has the base multicast ip of 239.1.1.1) and audio source 1. -- Vik Malhi – CCIE #13890 Instructor - IPexpert, Inc. Mailto: *vma...@ipexpert.com *Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Live Assistance, Please visit: www.ipexpert.com/chat * http://www.ipexpert.com/chat* IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA (RS, Voice Security), CCNP, CCVP, CCSP and CCIE (RS, Voice, Security Service Provider) Certification Training with locations throughout the United States, Europe and Australia. Be sure to check out our online communities at www.ipexpert.com/communities * http://www.ipexpert.com/communities* and our public website at www.ipexpert.com *http://www.ipexpert.com* . -- *From: *vccie2010 vccie2...@gmail.com *Date: *Wed, 20 Jan 2010 20:22:50 -0800 *To: *OSL Group ccie_voice@onlinestudylist.com *Subject: *Re: [OSL | CCIE_Voice] MOH from Flash Vik, so you mean whether we want G729 MOH or G711MOH to be played on BR1 from flash we should ALWAYS place MOH server in G711only. I did that and with that G711 MOH works perfectly fine when I put either HQ phone or PSTN phone on hold. But I am having problem work G729 MOH heard on BR1 phone when I place it on hold from HQ phone ( there is dead silence) while G729 MOH from works fine when I place BR1 phone on hold from PSTN ( I hear G729 Music on BR1 phone) . A this time on BR1 GW I do have multicast moh 239.1.1.3 port 16384 route favoicesubinterface IP Add lo0 IP Addr Am I missing something here please ? Wed, Jan 20, 2010 at 2:59 PM, vccie2010 vccie2...@gmail.com wrote: correction please... But when I change the DP on MOH server as HQ-DP I get G729 MOH only when PSTN caller is put on hold but dead silence again when placing HQ phone on hold. Is it normal behaviour or am I missing somehting here please HQ-DP has region which is g711 internaly and g729 to br1 and br2 regions... On Wed, Jan 20, 2010 at 2:48 PM, vccie2010 vccie2...@gmail.com wrote: When I set the MOH server in G711only ( which has region with G711only to all other regions) and MOH Aduio source set to MC and MOH server set to 239.1.1.1 port 16384 with max hops 1 call-manager-fallback ip source-addr favoicesubinterface IP Addr max-eph 1 max-dn 1 multicast moh 239.1.1.1 port 16384 route favoicesubinterface IP Add lo0 IP Addr ccm-manager music-oh-hold.au With above config G711 MOH from flash works fine, but when I try to set the G729 MOH by changingmulticast moh