Verity file indexing
If you specify make this document xhtml compliant, it does. Sorry, I should have said, Dreamweaver puts it in my default when creating an xhtml file. It's the first thing I normally take out because it puts IE6 into quirks mode, but for this site we wanted to use a DHTML menu that needed quirks mode to work properly so I put it back. Big mistake - I put an empty comment in there to get the same effect. ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Signup for the Fusion Authority news alert and keep up with the latest news in ColdFusion and related topics. http://www.fusionauthority.com/signup.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
Verity file indexing
Sorry about the previous message - I'm using the archives and I forgot to quote the previous message. The .cfm files had an xml prolog - ?xml version=1.0 encoding=iso-8859-1?. Yes, that prolog is Part of what makes an xml document valid. I dont think DWMX puts that in any file, unless you tell it to create an xml file. Joe, If you specify make this document xhtml compliant, it does. Sorry, I should have said, Dreamweaver puts it in my default when creating an xhtml file. the prolog is the first thing I normally take out because it puts IE6 into quirks mode, but for this site we wanted to use a DHTML menu that needed quirks mode to work properly so I put it back. Big mistake - I put an empty comment in there to get the same effect. Kay. ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Structure your ColdFusion code with Fusebox. Get the official book at http://www.fusionauthority.com/bkinfo.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
RE: Macromedia DONT help me now. so where do i turn now?
I'm starting to think that perhaps the problem might lie in the Windows. Does anyone know if there is a self-repair kind of thing in WinXPPRo? If I do a reinstall, will it safely install with all my tweaks and setting or will it take me all the way back to the initial installation again and I'll have to reinstall all my apps again? Cheers, Michael Kear Windsor, NSW, Australia AFP Webworks. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Tuesday, 11 March 2003 4:02 PM To: CF-Talk Subject: Re: Macromedia DONT help me now. so where do i turn now? I'm just thinking along the lines that there may be something wrong with the computer, maybe a corrupted nic driver, or a somehow broken IIS install...I've seen both of those cause many strange problems. The Metabase can get corrupted, but IIS will still function to a point, and corrupted nic drivers can cause all sorts of odd things to happen. I've installed MX on 3 machines, some old, some new, and had problems, but nothing like what you are seeing, and haven't seen people mentioning this kind of problem, so the problem would seem to be with your setup somewhere.Trying to install on another system would at least give concrete proof that the problem is with the computer if it succeeds. At which point I'd say it's time for a Windows reinstall, or at least download a copy of Metaedit to make sure your IIS metabase isn't corrupt, and reinstall the nic drivers. Forgive me if I'm off base, I've followed the threads but there have been quite a few and I may have missed some relevant point. -- mailto:[EMAIL PROTECTED] Monday, March 10, 2003, 11:30:08 PM, you wrote: ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq This list and all House of Fusion resources hosted by CFHosting.com. The place for dependable ColdFusion Hosting. Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
Lockdown CFMX
Hi Does someone know how to lock down Coldfusion Server? Idea is that we are going to be on internet through https. Now we need to secure our server. We'd already locked down IIS etc, only bit left is to secure Coldfusion Server. What sort of vulnerabilities we can have through our CFMX server. Shahzad Butt (Development Engineer) JJ FastFood Distribution Ltd. Office: +44 (0) 1992 701 722 Mobile: +44 (0) 7803 584 873 Fax: +44 (0) 1992 701 604 7 Solar Way, Innova Park, Enfield, London, EN3 7XY ![EMAIL PROTECTED]@APOLLO! ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Get the mailserver that powers this list at http://www.coolfusion.com Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
Re: Macromedia DONT help me now. so where do i turn now?
You could try the files and settings transfer wizard - it won't install your apps but it will keep your basic settings. You could then try installing IIS etc first - before running the wizard the second time. You need to leave the wizard running overnight to save your settings initially. Matthew Walker Electric Sheep Web http://www.electricsheep.co.nz/ - Original Message - From: Michael Kear [EMAIL PROTECTED] To: CF-Talk [EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 10:40 PM Subject: RE: Macromedia DONT help me now. so where do i turn now? I'm starting to think that perhaps the problem might lie in the Windows. Does anyone know if there is a self-repair kind of thing in WinXPPRo? If I do a reinstall, will it safely install with all my tweaks and setting or will it take me all the way back to the initial installation again and I'll have to reinstall all my apps again? Cheers, Michael Kear Windsor, NSW, Australia AFP Webworks. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Tuesday, 11 March 2003 4:02 PM To: CF-Talk Subject: Re: Macromedia DONT help me now. so where do i turn now? I'm just thinking along the lines that there may be something wrong with the computer, maybe a corrupted nic driver, or a somehow broken IIS install...I've seen both of those cause many strange problems. The Metabase can get corrupted, but IIS will still function to a point, and corrupted nic drivers can cause all sorts of odd things to happen. I've installed MX on 3 machines, some old, some new, and had problems, but nothing like what you are seeing, and haven't seen people mentioning this kind of problem, so the problem would seem to be with your setup somewhere.Trying to install on another system would at least give concrete proof that the problem is with the computer if it succeeds. At which point I'd say it's time for a Windows reinstall, or at least download a copy of Metaedit to make sure your IIS metabase isn't corrupt, and reinstall the nic drivers. Forgive me if I'm off base, I've followed the threads but there have been quite a few and I may have missed some relevant point. -- mailto:[EMAIL PROTECTED] Monday, March 10, 2003, 11:30:08 PM, you wrote: ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Get the mailserver that powers this list at http://www.coolfusion.com Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
OT: Scripting Internet Explorer
I'm being cheeky and reposting this as it didn't receive any replies last time, but I find it hard to believe nobody has any ideas on automating IE. If not, I'll find an IE newsgroup. Thanks. = Does anyone know how to script IE to open a web page, save it locally as a .mht file and then repeat that for, say, 100 other pages? The URLs will be almost identical, the only difference being one parameter in the query string. I read an earlier message saying that you could do something like this with Windows Script Host, but I've never played with it. Would that be the right approach? And before someone suggests cfhttp, this is something that (I think) needs to be done client-side, as we specifically want to save 100's of web pages as .mht files (compressed HTML), not as vanilla .html. -- Aidan Whitehall [EMAIL PROTECTED] Macromedia ColdFusion Developer Fairbanks Environmental Ltd +44 (0)1695 51775 ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Your ad could be here. Monies from ads go to support these lists and provide more resources for the community. http://www.fusionauthority.com/ads.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
Re: Macromedia DONT help me now. so where do i turn now?
Michael Kear wrote: Regular readers to this list will be aware that I have been wrestling with installing CFMX since last Friday to no avail. I decided to see if Macromedia would back me up as a reseller and developer, and I called their support line. I got connected to their Manilla office and Pauline's response was that I couldn't even talk to a support person unless I paid US$500. Weird. You sure it wasn't that you had to give a cc so they could authorize $500 and only charge you if it was PEBKAC? You could be right though, I have once had to explain the procedure to somebody in the EMEA office as well, and I have been calling to the US ever since. Jochem ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Signup for the Fusion Authority news alert and keep up with the latest news in ColdFusion and related topics. http://www.fusionauthority.com/signup.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
RE: Macromedia DONT help me now. so where do i turn now?
In my experience, the only solid way to do it is to backup whatever data settings you can, make sure you have all the hardware drivers/application software disks you need, then reformat the drive and do a fresh resinstall of everything and restore your data. I'm not a big fan of trying to correct mysterious potential windows problems with reinstalling windows over top itself rarely does that work Quite honestly this is usually a good thing every couple years anyway... In addition this may be a good exercise in preparing for the possibility of a serious crash. Windows seems to self corrupt over time or get corrupted thru various software installs. And yes... this is a real pain maybe shouldn't be necessary, but it's the only way to know for sure that windows xp is not the problem (I think you said you were running XP) Tim -Original Message- From: Michael Kear [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 4:40 AM To: CF-Talk Subject: RE: Macromedia DONT help me now. so where do i turn now? I'm starting to think that perhaps the problem might lie in the Windows. Does anyone know if there is a self-repair kind of thing in WinXPPRo? If I do a reinstall, will it safely install with all my tweaks and setting or will it take me all the way back to the initial installation again and I'll have to reinstall all my apps again? Cheers, Michael Kear Windsor, NSW, Australia AFP Webworks. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Tuesday, 11 March 2003 4:02 PM To: CF-Talk Subject: Re: Macromedia DONT help me now. so where do i turn now? I'm just thinking along the lines that there may be something wrong with the computer, maybe a corrupted nic driver, or a somehow broken IIS install...I've seen both of those cause many strange problems. The Metabase can get corrupted, but IIS will still function to a point, and corrupted nic drivers can cause all sorts of odd things to happen. I've installed MX on 3 machines, some old, some new, and had problems, but nothing like what you are seeing, and haven't seen people mentioning this kind of problem, so the problem would seem to be with your setup somewhere.Trying to install on another system would at least give concrete proof that the problem is with the computer if it succeeds. At which point I'd say it's time for a Windows reinstall, or at least download a copy of Metaedit to make sure your IIS metabase isn't corrupt, and reinstall the nic drivers. Forgive me if I'm off base, I've followed the threads but there have been quite a few and I may have missed some relevant point. -- mailto:[EMAIL PROTECTED] Monday, March 10, 2003, 11:30:08 PM, you wrote: ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Get the mailserver that powers this list at http://www.coolfusion.com Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
RE: Macromedia DONT help me now. so where do i turn now?
I tend to reformat every 6-8 months on my home machine as I back everything up anyway -Original Message- From: Tim Laureska [mailto:[EMAIL PROTECTED] Sent: 11 March 2003 10:46 To: CF-Talk Subject: RE: Macromedia DONT help me now. so where do i turn now? In my experience, the only solid way to do it is to backup whatever data settings you can, make sure you have all the hardware drivers/application software disks you need, then reformat the drive and do a fresh resinstall of everything and restore your data. I'm not a big fan of trying to correct mysterious potential windows problems with reinstalling windows over top itself rarely does that work Quite honestly this is usually a good thing every couple years anyway... In addition this may be a good exercise in preparing for the possibility of a serious crash. Windows seems to self corrupt over time or get corrupted thru various software installs. And yes... this is a real pain maybe shouldn't be necessary, but it's the only way to know for sure that windows xp is not the problem (I think you said you were running XP) Tim -Original Message- From: Michael Kear [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 4:40 AM To: CF-Talk Subject: RE: Macromedia DONT help me now. so where do i turn now? I'm starting to think that perhaps the problem might lie in the Windows. Does anyone know if there is a self-repair kind of thing in WinXPPRo? If I do a reinstall, will it safely install with all my tweaks and setting or will it take me all the way back to the initial installation again and I'll have to reinstall all my apps again? Cheers, Michael Kear Windsor, NSW, Australia AFP Webworks. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Tuesday, 11 March 2003 4:02 PM To: CF-Talk Subject: Re: Macromedia DONT help me now. so where do i turn now? I'm just thinking along the lines that there may be something wrong with the computer, maybe a corrupted nic driver, or a somehow broken IIS install...I've seen both of those cause many strange problems. The Metabase can get corrupted, but IIS will still function to a point, and corrupted nic drivers can cause all sorts of odd things to happen. I've installed MX on 3 machines, some old, some new, and had problems, but nothing like what you are seeing, and haven't seen people mentioning this kind of problem, so the problem would seem to be with your setup somewhere.Trying to install on another system would at least give concrete proof that the problem is with the computer if it succeeds. At which point I'd say it's time for a Windows reinstall, or at least download a copy of Metaedit to make sure your IIS metabase isn't corrupt, and reinstall the nic drivers. Forgive me if I'm off base, I've followed the threads but there have been quite a few and I may have missed some relevant point. -- mailto:[EMAIL PROTECTED] Monday, March 10, 2003, 11:30:08 PM, you wrote: ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq This list and all House of Fusion resources hosted by CFHosting.com. The place for dependable ColdFusion Hosting. Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
RE: Scripting Internet Explorer
Im sure if someone could have helped you, they would have offered some solutions or insight. This might get you started... http://www.tucows.com/preview/193807.html -Original Message- From: Aidan Whitehall [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 4:54 AM To: CF-Talk Subject: OT: Scripting Internet Explorer I'm being cheeky and reposting this as it didn't receive any replies last time, but I find it hard to believe nobody has any ideas on automating IE. If not, I'll find an IE newsgroup. Thanks. = Does anyone know how to script IE to open a web page, save it locally as a .mht file and then repeat that for, say, 100 other pages? The URLs will be almost identical, the only difference being one parameter in the query string. I read an earlier message saying that you could do something like this with Windows Script Host, but I've never played with it. Would that be the right approach? And before someone suggests cfhttp, this is something that (I think) needs to be done client-side, as we specifically want to save 100's of web pages as .mht files (compressed HTML), not as vanilla .html. -- Aidan Whitehall [EMAIL PROTECTED] Macromedia ColdFusion Developer Fairbanks Environmental Ltd +44 (0)1695 51775 ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq This list and all House of Fusion resources hosted by CFHosting.com. The place for dependable ColdFusion Hosting. Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
RE: Macromedia DONT help me now. so where do i turn now?
Tim Laureska wrote: Quite honestly this is usually a good thing every couple years anyway... In addition this may be a good exercise in preparing for the possibility of a serious crash. Windows seems to self corrupt over time or get corrupted thru various software installs. Every couple of years? Hell, I do that every couple of months... Win98 was every few weeks. Although I guess that being involved with so many beta programs doesn't do much for the stability of my system :) The other thing that you could do (sorry Mike, no good to you now) is use something like Ghost to create a complete image of your base fresh install (Windows and essential programs), so if anything wierd happens to your Windows (and it will) you have a clean working copy to start over with. K. -- Kay Smoljak http://kay.smoljak.com ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Signup for the Fusion Authority news alert and keep up with the latest news in ColdFusion and related topics. http://www.fusionauthority.com/signup.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
Re: Lockdown CFMX
Shahzad.Butt wrote: Does someone know how to lock down Coldfusion Server? Idea is that we are going to be on internet through https. Now we need to secure our server. We'd already locked down IIS etc, only bit left is to secure Coldfusion Server. What sort of vulnerabilities we can have through our CFMX server. I'm sure there is more, but here is a list to start. Make sure you: - run CF as a normal user - disable RDS - disable unneeded tags with security implications (cfexecute etc.) - disable unneeded services (do you need ODBC?) - disable direct conection through the built-in webserver - run only trusted code - do not install example apps or documentation - verify the inaccessibility of the WEB-INF directory Jochem ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Signup for the Fusion Authority news alert and keep up with the latest news in ColdFusion and related topics. http://www.fusionauthority.com/signup.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
Re: Where did my CFMX files go?
oi jonhall!! well CFMX just started acting funny yesterday... jrun would peg 100% compile pages were throwing errors, saying they were not legitimate. So I thought uninstall/reinstall. Ok this is weird. somebody sent me their 1 directory. I dropped it in, ran updater_2 and now the bloody 1 directory is not there again?? Clueless Monday, March 10, 2003, 11:15:06 PM, you wrote: jon Did it stop working all of the sudden, or were there suspicious jon circumstances... jon My 1 dir contains: jon jrun.dll jon jrun.ini jon jrunserver.store jon README.txt jon and a bunch of jrun log files. jon Try reinstalling updater 2, I've found it useful for fixing an install jon I've broken by deleting stuff I shouldn't have. --- [This E-mail scanned for viruses by Declude Virus] ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Structure your ColdFusion code with Fusebox. Get the official book at http://www.fusionauthority.com/bkinfo.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
Re: Creating custom tag?
Hi, I have a box that I created that appears multiple times in my template. The only thing that gets modified is the text and the width in pixels based on ths ize on my input box. Is it possible to create a custom tag where I can enter in only the text and width measurements? For examle: dialog text=Date Created width=156 input input input /dialog The above would draw a box around the input tags and insert the text appropriately. Below is the code I current;y use. !--- Start Date Created Box --- table border=0 cellpadding=12 cellspacing=0 width=156 tr td table border=0 cellpadding=0 cellspacing=0 tdimg src=cfoutput#Request.App.image_root#/cfoutputtbxl.gif width=2 height=17 border=0/td tdimg src=cfoutput#Request.App.image_root#/cfoutputtbxm.gif width=12 height=17 border=0/td td class=dialogheadnbsp;Datenbsp;Creatednbsp;/td td width=156img src=cfoutput#Request.App.image_root#/cfoutputtbxm.gif width=100% height=17 border=0/td tdimg src=cfoutput#Request.App.image_root#/cfoutputtbxr.gif width=2 height=17 border=0/td /tr tr tdimg src=cfoutput#Request.App.image_root#/cfoutputmbxl.gif width=2 height=100% border=0/td td colspan=3 width=100% height=100% table border=0 cellpadding=8 cellspacing=0 tr td class=binputtype input type=hidden name=theTime value=#now()# cfoutput input type=text name=theTime value=nbsp;#DateFormat(todayDate, , dd, )# size=30 class=inputfield READONLY /cfoutput /td /tr /table /td tdimg src=cfoutput#Request.App.image_root#/cfoutputmbxr.gif width=2 height=100% border=0/td /tr tr tdimg src=cfoutput#Request.App.image_root#/cfoutputbbxl.gif width=2 height=2 border=0/td td colspan=3img src=cfoutput#Request.App.image_root#/cfoutputmbxb.gif width=100% height=2 border=0/td tdimg src=cfoutput#Request.App.image_root#/cfoutputbbxr.gif width=2 height=2 border=0/td /tr /table /td /tr /table !--- End Date Created Box --- --- Colonel Nathan R. Jessop Commanding Officer Marine Ground Forces Guatanamo Bay, Cuba --- ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq This list and all House of Fusion resources hosted by CFHosting.com. The place for dependable ColdFusion Hosting. Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
RE: Macromedia DONT help me now. so where do i turn now?
Yea... ghost is great for that purpose -Original Message- From: Kay Smoljak [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 6:30 AM To: CF-Talk Subject: RE: Macromedia DONT help me now. so where do i turn now? Tim Laureska wrote: Quite honestly this is usually a good thing every couple years anyway... In addition this may be a good exercise in preparing for the possibility of a serious crash. Windows seems to self corrupt over time or get corrupted thru various software installs. Every couple of years? Hell, I do that every couple of months... Win98 was every few weeks. Although I guess that being involved with so many beta programs doesn't do much for the stability of my system :) The other thing that you could do (sorry Mike, no good to you now) is use something like Ghost to create a complete image of your base fresh install (Windows and essential programs), so if anything wierd happens to your Windows (and it will) you have a clean working copy to start over with. K. -- Kay Smoljak http://kay.smoljak.com ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq This list and all House of Fusion resources hosted by CFHosting.com. The place for dependable ColdFusion Hosting. Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
Re: Creating custom tag?
Sure. You can call the CustomTag such as CF_MyTag or using CFModule: CustomTag: CF_MyTag Text=Whatever you want to say bxheight=100 bxwidth=200 CFMODULE TEMPLATE=../CustomTags/MyTag.cfm TEXT=Whatever you want to say BXHEIGHT=100 BEWIDTH=200 Just remember now in your custom tag that the values of TEXT, BXHEIGHT and BXWIDTH should be referenced in the ATTRIBUTE Scope: ATTRIBUTE.TEXT ATTRIBUTE.BXHEIGHT ATTRIBUTE.BXWIDTH The good thing about CFModule is the tag can reside anywhere. Using the CF_MyTag approach, the tag must be in the custom tags directory specified in CF Administator. [EMAIL PROTECTED] 03/11/03 06:56AM Hi, I have a box that I created that appears multiple times in my template. The only thing that gets modified is the text and the width in pixels based on ths ize on my input box. Is it possible to create a custom tag where I can enter in only the text and width measurements? For examle: dialog text=Date Created width=156 input input input /dialog The above would draw a box around the input tags and insert the text appropriately. Below is the code I current;y use. !--- Start Date Created Box --- table border=0 cellpadding=12 cellspacing=0 width=156 tr td table border=0 cellpadding=0 cellspacing=0 tdimg src=cfoutput#Request.App.image_root#/cfoutputtbxl.gif width=2 height=17 border=0/td tdimg src=cfoutput#Request.App.image_root#/cfoutputtbxm.gif width=12 height=17 border=0/td td class=dialogheadnbsp;Datenbsp;Creatednbsp;/td td width=156img src=cfoutput#Request.App.image_root#/cfoutputtbxm.gif width=100% height=17 border=0/td tdimg src=cfoutput#Request.App.image_root#/cfoutputtbxr.gif width=2 height=17 border=0/td /tr tr tdimg src=cfoutput#Request.App.image_root#/cfoutputmbxl.gif width=2 height=100% border=0/td td colspan=3 width=100% height=100% table border=0 cellpadding=8 cellspacing=0 tr td class=binputtype input type=hidden name=theTime value=#now()# cfoutput input type=text name=theTime value=nbsp;#DateFormat(todayDate, , dd, )# size=30 class=inputfield READONLY /cfoutput /td /tr /table /td tdimg src=cfoutput#Request.App.image_root#/cfoutputmbxr.gif width=2 height=100% border=0/td /tr tr tdimg src=cfoutput#Request.App.image_root#/cfoutputbbxl.gif width=2 height=2 border=0/td td colspan=3img src=cfoutput#Request.App.image_root#/cfoutputmbxb.gif width=100% height=2 border=0/td tdimg src=cfoutput#Request.App.image_root#/cfoutputbbxr.gif width=2 height=2 border=0/td /tr /table /td /tr /table !--- End Date Created Box --- --- Colonel Nathan R. Jessop Commanding Officer Marine Ground Forces Guatanamo Bay, Cuba --- ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Signup for the Fusion Authority news alert and keep up with the latest news in ColdFusion and related topics. http://www.fusionauthority.com/signup.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
RE: Macromedia DONT help me now. so where do i turn now?
If you have been fooling around with this since Friday, you are investing more time that you had initially planned. You might better use your time rebuilding the machine. Just using it for CF and putting the IDE on it should only take at max 3-4 hours. In that way you would know that your machine is right and/or potentially isolate problems. During your windows installation you would not even have to install IIS, because it has it's own internal server. -//- Jaye Morris, Multimedia Developer -//- [EMAIL PROTECTED] - www.navtrak.net -//- [EMAIL PROTECTED] - www.jayezero.com -Original Message- From: Michael Kear [mailto:[EMAIL PROTECTED] Sent: Monday, March 10, 2003 11:11 PM To: CF-Talk Subject: Macromedia DONT help me now. so where do i turn now? AMAZING Regular readers to this list will be aware that I have been wrestling with installing CFMX since last Friday to no avail. I decided to see if Macromedia would back me up as a reseller and developer, and I called their support line. I got connected to their Manilla office and Pauline's response was that I couldn't even talk to a support person unless I paid US$500. IN other words, I have downloaded the CFMX, it doesn't install correctly, for whatever reason, I can't make it work, no one else can either apparently, and Macromedia aren't going to try unless I cough up nearly 2/3 of the cost of a server. That's to evalutate it!!! I guess I'm just not meant to be in the MX world. Cheers, Michael Kear Windsor, NSW, Australia AFP Webworks. ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq This list and all House of Fusion resources hosted by CFHosting.com. The place for dependable ColdFusion Hosting. Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
Re: Creating custom tag?
OK...so I don't have to do anything fancy. Just cut my code below into two files. Like so: CFMODULE TEMPLATE=../CustomTags/dialog_start.cfm TEXT=Whatever you want to say BXHEIGHT=100 BEWIDTH=200 input... input... input... CFMODULE TEMPLATE=../CustomTags/dialog_end.cfm ?? On Tue, 11 Mar 2003 07:20:11 -0500, Randell B Adkins wrote: Sure. You can call the CustomTag such as CF_MyTag or using CFModule: CustomTag: CF_MyTag Text=Whatever you want to say bxheight=100 bxwidth=200 CFMODULE TEMPLATE=../CustomTags/MyTag.cfm TEXT=Whatever you want to say BXHEIGHT=100 BEWIDTH=200 Just remember now in your custom tag that the values of TEXT, BXHEIGHT and BXWIDTH should be referenced in the ATTRIBUTE Scope: ATTRIBUTE.TEXT ATTRIBUTE.BXHEIGHT ATTRIBUTE.BXWIDTH The good thing about CFModule is the tag can reside anywhere. Using the CF_MyTag approach, the tag must be in the custom tags directory specified in CF Administator. [EMAIL PROTECTED] 03/11/03 06:56AM Hi, I have a box that I created that appears multiple times in my template. The only thing that gets modified is the text and the width in pixels based on ths ize on my input box. Is it possible to create a custom tag where I can enter in only the text and width measurements? For examle: dialog text=Date Created width=156 input input input /dialog The above would draw a box around the input tags and insert the text appropriately. Below is the code I current;y use. !--- Start Date Created Box --- table border=0 cellpadding=12 cellspacing=0 width=156 tr td table border=0 cellpadding=0 cellspacing=0 tdimg src=cfoutput#Request.App.image_root#/cfoutputtbxl.gif width=2 height=17 border=0/td tdimg src=cfoutput#Request.App.image_root#/cfoutputtbxm.gif width=12 height=17 border=0/td td class=dialogheadnbsp;Datenbsp;Creatednbsp;/td td width=156img src=cfoutput#Request.App.image_root#/cfoutputtbxm.gif width=100% height=17 border=0/td tdimg src=cfoutput#Request.App.image_root#/cfoutputtbxr.gif width=2 height=17 border=0/td /tr tr tdimg src=cfoutput#Request.App.image_root#/cfoutputmbxl.gif width=2 height=100% border=0/td td colspan=3 width=100% height=100% table border=0 cellpadding=8 cellspacing=0 tr td class=binputtype input type=hidden name=theTime value=#now()# cfoutput input type=text name=theTime value=nbsp;#DateFormat(todayDate, , dd, )# size=30 class=inputfield READONLY /cfoutput /td /tr /table /td tdimg src=cfoutput#Request.App.image_root#/cfoutputmbxr.gif width=2 height=100% border=0/td /tr tr tdimg src=cfoutput#Request.App.image_root#/cfoutputbbxl.gif width=2 height=2 border=0/td td colspan=3img src=cfoutput#Request.App.image_root#/cfoutputmbxb.gif width=100% height=2 border=0/td tdimg src=cfoutput#Request.App.image_root#/cfoutputbbxr.gif width=2 height=2 border=0/td /tr /table /td /tr /table !--- End Date Created Box --- --- Colonel Nathan R. Jessop Commanding Officer Marine Ground Forces Guatanamo Bay, Cuba --- ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Signup for the Fusion Authority news alert and keep up with the latest news in ColdFusion and related topics. http://www.fusionauthority.com/signup.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
Re: Creating custom tag?
Yes just considering that the dialog_start would be the beginning part of your tabel then your inputs are within that table elements itself. Then you will need to close your tables thus I am assuming that is the reason for the dialog_end [EMAIL PROTECTED] 03/11/03 07:25AM OK...so I don't have to do anything fancy. Just cut my code below into two files. Like so: CFMODULE TEMPLATE=../CustomTags/dialog_start.cfm TEXT=Whatever you want to say BXHEIGHT=100 BEWIDTH=200 input... input... input... CFMODULE TEMPLATE=../CustomTags/dialog_end.cfm ?? On Tue, 11 Mar 2003 07:20:11 -0500, Randell B Adkins wrote: Sure. You can call the CustomTag such as CF_MyTag or using CFModule: CustomTag: CF_MyTag Text=Whatever you want to say bxheight=100 bxwidth=200 CFMODULE TEMPLATE=../CustomTags/MyTag.cfm TEXT=Whatever you want to say BXHEIGHT=100 BEWIDTH=200 Just remember now in your custom tag that the values of TEXT, BXHEIGHT and BXWIDTH should be referenced in the ATTRIBUTE Scope: ATTRIBUTE.TEXT ATTRIBUTE.BXHEIGHT ATTRIBUTE.BXWIDTH The good thing about CFModule is the tag can reside anywhere. Using the CF_MyTag approach, the tag must be in the custom tags directory specified in CF Administator. [EMAIL PROTECTED] 03/11/03 06:56AM Hi, I have a box that I created that appears multiple times in my template. The only thing that gets modified is the text and the width in pixels based on ths ize on my input box. Is it possible to create a custom tag where I can enter in only the text and width measurements? For examle: dialog text=Date Created width=156 input input input /dialog The above would draw a box around the input tags and insert the text appropriately. Below is the code I current;y use. !--- Start Date Created Box --- table border=0 cellpadding=12 cellspacing=0 width=156 tr td table border=0 cellpadding=0 cellspacing=0 tdimg src=cfoutput#Request.App.image_root#/cfoutputtbxl.gif width=2 height=17 border=0/td tdimg src=cfoutput#Request.App.image_root#/cfoutputtbxm.gif width=12 height=17 border=0/td td class=dialogheadnbsp;Datenbsp;Creatednbsp;/td td width=156img src=cfoutput#Request.App.image_root#/cfoutputtbxm.gif width=100% height=17 border=0/td tdimg src=cfoutput#Request.App.image_root#/cfoutputtbxr.gif width=2 height=17 border=0/td /tr tr tdimg src=cfoutput#Request.App.image_root#/cfoutputmbxl.gif width=2 height=100% border=0/td td colspan=3 width=100% height=100% table border=0 cellpadding=8 cellspacing=0 tr td class=binputtype input type=hidden name=theTime value=#now()# cfoutput input type=text name=theTime value=nbsp;#DateFormat(todayDate, , dd, )# size=30 class=inputfield READONLY /cfoutput /td /tr /table /td tdimg src=cfoutput#Request.App.image_root#/cfoutputmbxr.gif width=2 height=100% border=0/td /tr tr tdimg src=cfoutput#Request.App.image_root#/cfoutputbbxl.gif width=2 height=2 border=0/td td colspan=3img src=cfoutput#Request.App.image_root#/cfoutputmbxb.gif width=100% height=2 border=0/td tdimg src=cfoutput#Request.App.image_root#/cfoutputbbxr.gif width=2 height=2 border=0/td /tr /table /td /tr /table !--- End Date Created Box --- --- Colonel Nathan R. Jessop Commanding Officer Marine Ground Forces Guatanamo Bay, Cuba --- ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Your ad could be here. Monies from ads go to support these lists and provide more resources for the community. http://www.fusionauthority.com/ads.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
Re: Creating custom tag?
Correct. It works great. Thanks On Tue, 11 Mar 2003 07:47:01 -0500, Randell B Adkins wrote: Yes just considering that the dialog_start would be the beginning part of your tabel then your inputs are within that table elements itself. Then you will need to close your tables thus I am assuming that is the reason for the dialog_end [EMAIL PROTECTED] 03/11/03 07:25AM OK...so I don't have to do anything fancy. Just cut my code below into two files. Like so: CFMODULE TEMPLATE=../CustomTags/dialog_start.cfm TEXT=Whatever you want to say BXHEIGHT=100 BEWIDTH=200 input... input... input... CFMODULE TEMPLATE=../CustomTags/dialog_end.cfm ?? On Tue, 11 Mar 2003 07:20:11 -0500, Randell B Adkins wrote: Sure. You can call the CustomTag such as CF_MyTag or using CFModule: CustomTag: CF_MyTag Text=Whatever you want to say bxheight=100 bxwidth=200 CFMODULE TEMPLATE=../CustomTags/MyTag.cfm TEXT=Whatever you want to say BXHEIGHT=100 BEWIDTH=200 Just remember now in your custom tag that the values of TEXT, BXHEIGHT and BXWIDTH should be referenced in the ATTRIBUTE Scope: ATTRIBUTE.TEXT ATTRIBUTE.BXHEIGHT ATTRIBUTE.BXWIDTH The good thing about CFModule is the tag can reside anywhere. Using the CF_MyTag approach, the tag must be in the custom tags directory specified in CF Administator. [EMAIL PROTECTED] 03/11/03 06:56AM Hi, I have a box that I created that appears multiple times in my template. The only thing that gets modified is the text and the width in pixels based on ths ize on my input box. Is it possible to create a custom tag where I can enter in only the text and width measurements? For examle: dialog text=Date Created width=156 input input input /dialog The above would draw a box around the input tags and insert the text appropriately. Below is the code I current;y use. !--- Start Date Created Box --- table border=0 cellpadding=12 cellspacing=0 width=156 tr td table border=0 cellpadding=0 cellspacing=0 tdimg src=cfoutput#Request.App.image_root#/cfoutputtbxl.gif width=2 height=17 border=0/td tdimg src=cfoutput#Request.App.image_root#/cfoutputtbxm.gif width=12 height=17 border=0/td td class=dialogheadnbsp;Datenbsp;Creatednbsp;/td td width=156img src=cfoutput#Request.App.image_root#/cfoutputtbxm.gif width=100% height=17 border=0/td tdimg src=cfoutput#Request.App.image_root#/cfoutputtbxr.gif width=2 height=17 border=0/td /tr tr tdimg src=cfoutput#Request.App.image_root#/cfoutputmbxl.gif width=2 height=100% border=0/td td colspan=3 width=100% height=100% table border=0 cellpadding=8 cellspacing=0 tr td class=binputtype input type=hidden name=theTime value=#now()# cfoutput input type=text name=theTime value=nbsp;#DateFormat(todayDate, , dd, )# size=30 class=inputfield READONLY /cfoutput /td /tr /table /td tdimg src=cfoutput#Request.App.image_root#/cfoutputmbxr.gif width=2 height=100% border=0/td /tr tr tdimg src=cfoutput#Request.App.image_root#/cfoutputbbxl.gif width=2 height=2 border=0/td td colspan=3img src=cfoutput#Request.App.image_root#/cfoutputmbxb.gif width=100% height=2 border=0/td tdimg src=cfoutput#Request.App.image_root#/cfoutputbbxr.gif width=2 height=2 border=0/td /tr /table /td /tr /table !--- End Date Created Box --- --- Colonel Nathan R. Jessop Commanding Officer Marine Ground Forces Guatanamo Bay, Cuba --- ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Structure your ColdFusion code with Fusebox. Get the official book at http://www.fusionauthority.com/bkinfo.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
RE: Creating custom tag?
Just remember now in your custom tag that the values of TEXT, BXHEIGHT and BXWIDTH should be referenced in the ATTRIBUTE Scope: Attributes scope, actually. ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq This list and all House of Fusion resources hosted by CFHosting.com. The place for dependable ColdFusion Hosting. Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
Re: Creating custom tag?
Opps...not quite. Would I put these in my application.cfm along with my APPLICATION. stuff? referenced in the ATTRIBUTE Scope: ATTRIBUTE.TEXT ATTRIBUTE.BXHEIGHT ATTRIBUTE.BXWIDTH On Tue, 11 Mar 2003 07:48:47 -0500, FlashGuy wrote: Correct. It works great. Thanks On Tue, 11 Mar 2003 07:47:01 -0500, Randell B Adkins wrote: Yes just considering that the dialog_start would be the beginning part of your tabel then your inputs are within that table elements itself. Then you will need to close your tables thus I am assuming that is the reason for the dialog_end [EMAIL PROTECTED] 03/11/03 07:25AM OK...so I don't have to do anything fancy. Just cut my code below into two files. Like so: CFMODULE TEMPLATE=../CustomTags/dialog_start.cfm TEXT=Whatever you want to say BXHEIGHT=100 BEWIDTH=200 input... input... input... CFMODULE TEMPLATE=../CustomTags/dialog_end.cfm ?? On Tue, 11 Mar 2003 07:20:11 -0500, Randell B Adkins wrote: Sure. You can call the CustomTag such as CF_MyTag or using CFModule: CustomTag: CF_MyTag Text=Whatever you want to say bxheight=100 bxwidth=200 CFMODULE TEMPLATE=../CustomTags/MyTag.cfm TEXT=Whatever you want to say BXHEIGHT=100 BEWIDTH=200 Just remember now in your custom tag that the values of TEXT, BXHEIGHT and BXWIDTH should be referenced in the ATTRIBUTE Scope: ATTRIBUTE.TEXT ATTRIBUTE.BXHEIGHT ATTRIBUTE.BXWIDTH The good thing about CFModule is the tag can reside anywhere. Using the CF_MyTag approach, the tag must be in the custom tags directory specified in CF Administator. [EMAIL PROTECTED] 03/11/03 06:56AM Hi, I have a box that I created that appears multiple times in my template. The only thing that gets modified is the text and the width in pixels based on ths ize on my input box. Is it possible to create a custom tag where I can enter in only the text and width measurements? For examle: dialog text=Date Created width=156 input input input /dialog The above would draw a box around the input tags and insert the text appropriately. Below is the code I current;y use. !--- Start Date Created Box --- table border=0 cellpadding=12 cellspacing=0 width=156 tr td table border=0 cellpadding=0 cellspacing=0 tdimg src=cfoutput#Request.App.image_root#/cfoutputtbxl.gif width=2 height=17 border=0/td tdimg src=cfoutput#Request.App.image_root#/cfoutputtbxm.gif width=12 height=17 border=0/td td class=dialogheadnbsp;Datenbsp;Creatednbsp;/td td width=156img src=cfoutput#Request.App.image_root#/cfoutputtbxm.gif width=100% height=17 border=0/td tdimg src=cfoutput#Request.App.image_root#/cfoutputtbxr.gif width=2 height=17 border=0/td /tr tr tdimg src=cfoutput#Request.App.image_root#/cfoutputmbxl.gif width=2 height=100% border=0/td td colspan=3 width=100% height=100% table border=0 cellpadding=8 cellspacing=0 tr td class=binputtype input type=hidden name=theTime value=#now()# cfoutput input type=text name=theTime value=nbsp;#DateFormat(todayDate, , dd, )# size=30 class=inputfield READONLY /cfoutput /td /tr /table /td tdimg src=cfoutput#Request.App.image_root#/cfoutputmbxr.gif width=2 height=100% border=0/td /tr tr tdimg src=cfoutput#Request.App.image_root#/cfoutputbbxl.gif width=2 height=2 border=0/td td colspan=3img src=cfoutput#Request.App.image_root#/cfoutputmbxb.gif width=100% height=2 border=0/td tdimg src=cfoutput#Request.App.image_root#/cfoutputbbxr.gif width=2 height=2 border=0/td /tr /table /td /tr /table !--- End Date Created Box --- --- Colonel Nathan R. Jessop Commanding Officer Marine Ground Forces Guatanamo Bay, Cuba --- ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Structure your ColdFusion code with Fusebox. Get the official book at http://www.fusionauthority.com/bkinfo.cfm Unsubscribe:
Re: Creating custom tag?
I'm not sure where to define the attributes. Below is my code split up into files (dialog_start.cfm, dialog_end.cfm) and test.cfm contains the CFMODULE stuff. What am I doing wrong? The CFMODULE attributes (bxtext, bxwidth) are not being inserted. dialog_start.cfm --- !--- Start Date Created Box --- table border=0 cellpadding=12 cellspacing=0 width=#bxwidth# tr td table border=0 cellpadding=0 cellspacing=0 tdimg src=cfoutput#Request.App.image_root#/cfoutputtbxl.gif width=2 height=17 border=0/td tdimg src=cfoutput#Request.App.image_root#/cfoutputtbxm.gif width=12 height=17 border=0/td td class=dialogheadcfoutputnbsp;#bxtext#nbsp;/cfoutput/td td width=bxwidth#img src=cfoutput#Request.App.image_root#/cfoutputtbxm.gif width=100% height=17 border=0/td tdimg src=cfoutput#Request.App.image_root#/cfoutputtbxr.gif width=2 height=17 border=0/td /tr tr tdimg src=cfoutput#Request.App.image_root#/cfoutputmbxl.gif width=2 height=100% border=0/td td colspan=3 width=#Request.Att.bxwidth# height=100% table border=0 cellpadding=8 cellspacing=0 tr td class=binputtype dialog_end.cfm --- /td /tr /table /td tdimg src=cfoutput#Request.App.image_root#/cfoutputmbxr.gif width=2 height=100% border=0/td /tr tr tdimg src=cfoutput#Request.App.image_root#/cfoutputbbxl.gif width=2 height=2 border=0/td td colspan=3img src=cfoutput#Request.App.image_root#/cfoutputmbxb.gif width=100% height=2 border=0/td tdimg src=cfoutput#Request.App.image_root#/cfoutputbbxr.gif width=2 height=2 border=0/td /tr /table /td /tr /table !--- End Date Created Box --- test.cfm --- CFMODULE TEMPLATE=dialog_start.cfm BXTEXT=Wicked BXWIDTH=140 cfoutput input type=text name=theTime value=nbsp;#DateFormat(todayDate, , dd, )# size=30 class=inputfield onfocus=this.blur(); input type=hidden name=theTime value=#DateFormat(todayDate, , dd, )# /cfoutput CFMODULE TEMPLATE=dialog_end.cfm On Tue, 11 Mar 2003 07:52:50 -0500, FlashGuy wrote: Opps...not quite. Would I put these in my application.cfm along with my APPLICATION. stuff? referenced in the ATTRIBUTE Scope: ATTRIBUTE.TEXT ATTRIBUTE.BXHEIGHT ATTRIBUTE.BXWIDTH On Tue, 11 Mar 2003 07:48:47 -0500, FlashGuy wrote: Correct. It works great. Thanks On Tue, 11 Mar 2003 07:47:01 -0500, Randell B Adkins wrote: Yes just considering that the dialog_start would be the beginning part of your tabel then your inputs are within that table elements itself. Then you will need to close your tables thus I am assuming that is the reason for the dialog_end [EMAIL PROTECTED] 03/11/03 07:25AM OK...so I don't have to do anything fancy. Just cut my code below into two files. Like so: CFMODULE TEMPLATE=../CustomTags/dialog_start.cfm TEXT=Whatever you want to say BXHEIGHT=100 BEWIDTH=200 input... input... input... CFMODULE TEMPLATE=../CustomTags/dialog_end.cfm ?? On Tue, 11 Mar 2003 07:20:11 -0500, Randell B Adkins wrote: Sure. You can call the CustomTag such as CF_MyTag or using CFModule: CustomTag: CF_MyTag Text=Whatever you want to say bxheight=100 bxwidth=200 CFMODULE TEMPLATE=../CustomTags/MyTag.cfm TEXT=Whatever you want to say BXHEIGHT=100 BEWIDTH=200 Just remember now in your custom tag that the values of TEXT, BXHEIGHT and BXWIDTH should be referenced in the ATTRIBUTE Scope: ATTRIBUTE.TEXT ATTRIBUTE.BXHEIGHT ATTRIBUTE.BXWIDTH The good thing about CFModule is the tag can reside anywhere. Using the CF_MyTag approach, the tag must be in the custom tags directory specified in CF Administator. [EMAIL PROTECTED] 03/11/03 06:56AM Hi, I have a box that I created that appears multiple times in my template. The only thing that gets modified is the text and the width in pixels based on ths ize on my input box. Is it possible to create a custom tag where I can enter in only the text and width measurements? For examle: dialog text=Date Created width=156 input input input /dialog The above would draw a box around the input tags and insert the text appropriately. Below is the code I current;y use. !--- Start Date Created Box --- table border=0 cellpadding=12 cellspacing=0 width=156 tr td table border=0 cellpadding=0 cellspacing=0 tdimg src=cfoutput#Request.App.image_root#/cfoutputtbxl.gif width=2 height=17 border=0/td tdimg
Re: Macromedia DONT help me now. so where do i turn now?
a clean install is the best way to go, as I suggested too you a few days ago. but xp also has a repair feature to where it goes over your install and fixes its files but I'm not sure I'd trust that. - Original Message - From: Michael Kear [EMAIL PROTECTED] To: CF-Talk [EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 4:40 AM Subject: RE: Macromedia DONT help me now. so where do i turn now? I'm starting to think that perhaps the problem might lie in the Windows. Does anyone know if there is a self-repair kind of thing in WinXPPRo? If I do a reinstall, will it safely install with all my tweaks and setting or will it take me all the way back to the initial installation again and I'll have to reinstall all my apps again? Cheers, Michael Kear Windsor, NSW, Australia AFP Webworks. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Tuesday, 11 March 2003 4:02 PM To: CF-Talk Subject: Re: Macromedia DONT help me now. so where do i turn now? I'm just thinking along the lines that there may be something wrong with the computer, maybe a corrupted nic driver, or a somehow broken IIS install...I've seen both of those cause many strange problems. The Metabase can get corrupted, but IIS will still function to a point, and corrupted nic drivers can cause all sorts of odd things to happen. I've installed MX on 3 machines, some old, some new, and had problems, but nothing like what you are seeing, and haven't seen people mentioning this kind of problem, so the problem would seem to be with your setup somewhere.Trying to install on another system would at least give concrete proof that the problem is with the computer if it succeeds. At which point I'd say it's time for a Windows reinstall, or at least download a copy of Metaedit to make sure your IIS metabase isn't corrupt, and reinstall the nic drivers. Forgive me if I'm off base, I've followed the threads but there have been quite a few and I may have missed some relevant point. -- mailto:[EMAIL PROTECTED] Monday, March 10, 2003, 11:30:08 PM, you wrote: ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Signup for the Fusion Authority news alert and keep up with the latest news in ColdFusion and related topics. http://www.fusionauthority.com/signup.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
RE: FoxPro databases: does CF use indexes?
CF will access FoxPro efficiently, we do it all day every day. If you submit a poorly written query it will perform poorly, but if you write an optimized query it will fly. For example, we have an inventory table with an index defined as UPPER(stockno). I had a programmer write a query on his page for WHERE stockno = '#form.stockno#'. It would take FOREVER to run. When I looked at it and realized it wasn't using the index and had him change it to WHERE UPPER(stockno) = '#form.stockno#' the results were instant. In fact you could take his original query straight out of CF and execute it in FoxPro and while it was every bit as slow. As others have said, all CF does is pass the query off to the FoxPro ODBC driver you have installed on your server. It's up to that driver to insure the performance. __ Bill Grover Supervisor MIS Phone: 301.424.3300 x3324 EU Services, Inc. FAX:301.424.3696 649 North Horners Lane E-Mail: [EMAIL PROTECTED] Rockville, MD 20850-1299WWW:http://www.euservices.com __ -Original Message- From: Dan O'Keefe [mailto:[EMAIL PROTECTED] Sent: Monday, March 10, 2003 12:55 PM To: CF-Talk Subject: RE: FoxPro databases: does CF use indexes? My memory of using VFP databases with CF was not a good one and seem to remember running into the same issues. I then turned to getting the data into SQL. I realize that may not be an option for you. You might want to check some ASP forums and see if that have any threads on using these databases. Theoretically it is the same, ODBC passing the query along to the DB. I also seem to remember queries doing a number on the server resources. Dan -Original Message- From: Jack Ince [mailto:[EMAIL PROTECTED] Sent: Monday, March 10, 2003 11:38 AM To: CF-Talk Subject: RE: Foxpro databases: does CF use indexes? Foxpro is independent of CF. When you submit you cfquery all data gathering is passed off to Foxpro. From there Foxpro will proceed just like it was a Foxpro request, and will use any index it can. I assume that your management has upgraded to Visual FP if they are so concerned about the speed. -Original Message- From: Ed Gordon [mailto:[EMAIL PROTECTED] Sent: Monday, March 10, 2003 7:22 AM To: CF-Talk Subject: Foxpro databases: does CF use indexes? Management here has seen time-to-production decimated since I introduced Cold Fusion. Yet, doubt remains about it's efficiency reading the legacy Foxpro databases. If I have CF read some Foxpro database files (.dbf), will it use the database index files (.cdx) automatically? How could I tell? How could I *prove to management* that it indeed is using them? If not, can I explicitly use them? How? Thanks in advance for your help... Ed Gordon --- Old so Soon, Smart so Late, When I'm Learning, ... Life is Great! ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Get the mailserver that powers this list at http://www.coolfusion.com Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
Re: Javascript Signed Scripting Re: window.close question?
Jann, Thanks a million for the information. I'll look through it all soon. Regards, James Blaha Jann VanOver wrote: Mozilla has a write up on signed javascripting: http://www.mozilla.org/projects/security/components/signed-scripts.html There's an old (Netscape 4.0) article here: http://polaris.umuc.edu/~mgaylor/SignedScripts.html And some Netscape/Gekko notes at http://devedge.netscape.com/central/security/ AND http://devedge.netscape.com/viewsource/2002/bypassing-security-restrictions/ On 3/9/03 1:48 PM, James Blaha [EMAIL PROTECTED] wrote: Jeff, Jann Critz, Thank you all very much for your input and time. I¹m working on an intranet application so I¹m not worried about security for the user¹s browser. Jann do you know how this would be done in a secure, signed, scripting environment? If you do can you please email me an example if you have one handy otherwise I found a work around for my issue so I can put an end to this thread. Thanks again! Regards, James Blaha Jann VanOver wrote: On 3/7/03 10:30 AM, James Blaha [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] wrote: Hello All: JavaScript Question I need to have JavaScript code work for Netscape 4.7 to open a child window and close the parent and bypass the confirm message. [snip] You should not be able to do this unless you are in a secure, signed, scripting environment. Period. What you are asking invades the user's privacy. When you close the parent, you lose all their page history information -- this is why the confirmation message appears. The confirmation message will always appear if you programmatically try to close a window that the user opened. I am a bit shocked that the code you give doesn't launch a confirmation message in IE and Netscape 6-7. You must have your user privacy settings lower in those browsers. Can someone please send me an example? This code works in IE and Netscape 6-7 but not Netscape 4.7 !--- SCRIPT LANGUAGE = JavaScript { newwin=window.open(Login.cfm,_blank,... ) firstwindow = window.self; firstwindow.opener = window.self; firstwindow.close(); newwin.focus() } /SCRIPT --- ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Your ad could be here. Monies from ads go to support these lists and provide more resources for the community. http://www.fusionauthority.com/ads.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
RE: FoxPro databases: does CF use indexes?
not just the driver...the server as impacts on performance also. -Original Message- From: Bill Grover [mailto:[EMAIL PROTECTED] Sent: 11 March 2003 13:35 To: CF-Talk Subject: RE: FoxPro databases: does CF use indexes? CF will access FoxPro efficiently, we do it all day every day. If you submit a poorly written query it will perform poorly, but if you write an optimized query it will fly. For example, we have an inventory table with an index defined as UPPER(stockno). I had a programmer write a query on his page for WHERE stockno = '#form.stockno#'. It would take FOREVER to run. When I looked at it and realized it wasn't using the index and had him change it to WHERE UPPER(stockno) = '#form.stockno#' the results were instant. In fact you could take his original query straight out of CF and execute it in FoxPro and while it was every bit as slow. As others have said, all CF does is pass the query off to the FoxPro ODBC driver you have installed on your server. It's up to that driver to insure the performance. __ Bill Grover Supervisor MIS Phone: 301.424.3300 x3324 EU Services, Inc. FAX:301.424.3696 649 North Horners Lane E-Mail: [EMAIL PROTECTED] Rockville, MD 20850-1299WWW:http://www.euservices.com __ -Original Message- From: Dan O'Keefe [mailto:[EMAIL PROTECTED] Sent: Monday, March 10, 2003 12:55 PM To: CF-Talk Subject: RE: FoxPro databases: does CF use indexes? My memory of using VFP databases with CF was not a good one and seem to remember running into the same issues. I then turned to getting the data into SQL. I realize that may not be an option for you. You might want to check some ASP forums and see if that have any threads on using these databases. Theoretically it is the same, ODBC passing the query along to the DB. I also seem to remember queries doing a number on the server resources. Dan -Original Message- From: Jack Ince [mailto:[EMAIL PROTECTED] Sent: Monday, March 10, 2003 11:38 AM To: CF-Talk Subject: RE: Foxpro databases: does CF use indexes? Foxpro is independent of CF. When you submit you cfquery all data gathering is passed off to Foxpro. From there Foxpro will proceed just like it was a Foxpro request, and will use any index it can. I assume that your management has upgraded to Visual FP if they are so concerned about the speed. -Original Message- From: Ed Gordon [mailto:[EMAIL PROTECTED] Sent: Monday, March 10, 2003 7:22 AM To: CF-Talk Subject: Foxpro databases: does CF use indexes? Management here has seen time-to-production decimated since I introduced Cold Fusion. Yet, doubt remains about it's efficiency reading the legacy Foxpro databases. If I have CF read some Foxpro database files (.dbf), will it use the database index files (.cdx) automatically? How could I tell? How could I *prove to management* that it indeed is using them? If not, can I explicitly use them? How? Thanks in advance for your help... Ed Gordon --- Old so Soon, Smart so Late, When I'm Learning, ... Life is Great! ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Signup for the Fusion Authority news alert and keep up with the latest news in ColdFusion and related topics. http://www.fusionauthority.com/signup.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
Re: Creating custom tag?
Anytime you need to reference the BXHEIGHT you use: Attributes.bxheight table border=0 cellpadding=12 cellspacing=0 width=#ATTRIBUTES.bxwidth# And the same for all other attributes that is being used in the CFMODULE call. [EMAIL PROTECTED] 03/11/03 08:15AM I'm not sure where to define the attributes. Below is my code split up into files (dialog_start.cfm, dialog_end.cfm) and test.cfm contains the CFMODULE stuff. What am I doing wrong? The CFMODULE attributes (bxtext, bxwidth) are not being inserted. dialog_start.cfm --- !--- Start Date Created Box --- table border=0 cellpadding=12 cellspacing=0 width=#bxwidth# tr td table border=0 cellpadding=0 cellspacing=0 tdimg src=cfoutput#Request.App.image_root#/cfoutputtbxl.gif width=2 height=17 border=0/td tdimg src=cfoutput#Request.App.image_root#/cfoutputtbxm.gif width=12 height=17 border=0/td td class=dialogheadcfoutputnbsp;#bxtext#nbsp;/cfoutput/td td width=bxwidth#img src=cfoutput#Request.App.image_root#/cfoutputtbxm.gif width=100% height=17 border=0/td tdimg src=cfoutput#Request.App.image_root#/cfoutputtbxr.gif width=2 height=17 border=0/td /tr tr tdimg src=cfoutput#Request.App.image_root#/cfoutputmbxl.gif width=2 height=100% border=0/td td colspan=3 width=#Request.Att.bxwidth# height=100% table border=0 cellpadding=8 cellspacing=0 tr td class=binputtype dialog_end.cfm --- /td /tr /table /td tdimg src=cfoutput#Request.App.image_root#/cfoutputmbxr.gif width=2 height=100% border=0/td /tr tr tdimg src=cfoutput#Request.App.image_root#/cfoutputbbxl.gif width=2 height=2 border=0/td td colspan=3img src=cfoutput#Request.App.image_root#/cfoutputmbxb.gif width=100% height=2 border=0/td tdimg src=cfoutput#Request.App.image_root#/cfoutputbbxr.gif width=2 height=2 border=0/td /tr /table /td /tr /table !--- End Date Created Box --- test.cfm --- CFMODULE TEMPLATE=dialog_start.cfm BXTEXT=Wicked BXWIDTH=140 cfoutput input type=text name=theTime value=nbsp;#DateFormat(todayDate, , dd, )# size=30 class=inputfield onfocus=this.blur(); input type=hidden name=theTime value=#DateFormat(todayDate, , dd, )# /cfoutput CFMODULE TEMPLATE=dialog_end.cfm On Tue, 11 Mar 2003 07:52:50 -0500, FlashGuy wrote: Opps...not quite. Would I put these in my application.cfm along with my APPLICATION. stuff? referenced in the ATTRIBUTE Scope: ATTRIBUTE.TEXT ATTRIBUTE.BXHEIGHT ATTRIBUTE.BXWIDTH On Tue, 11 Mar 2003 07:48:47 -0500, FlashGuy wrote: Correct. It works great. Thanks On Tue, 11 Mar 2003 07:47:01 -0500, Randell B Adkins wrote: Yes just considering that the dialog_start would be the beginning part of your tabel then your inputs are within that table elements itself. Then you will need to close your tables thus I am assuming that is the reason for the dialog_end [EMAIL PROTECTED] 03/11/03 07:25AM OK...so I don't have to do anything fancy. Just cut my code below into two files. Like so: CFMODULE TEMPLATE=../CustomTags/dialog_start.cfm TEXT=Whatever you want to say BXHEIGHT=100 BEWIDTH=200 input... input... input... CFMODULE TEMPLATE=../CustomTags/dialog_end.cfm ?? On Tue, 11 Mar 2003 07:20:11 -0500, Randell B Adkins wrote: Sure. You can call the CustomTag such as CF_MyTag or using CFModule: CustomTag: CF_MyTag Text=Whatever you want to say bxheight=100 bxwidth=200 CFMODULE TEMPLATE=../CustomTags/MyTag.cfm TEXT=Whatever you want to say BXHEIGHT=100 BEWIDTH=200 Just remember now in your custom tag that the values of TEXT, BXHEIGHT and BXWIDTH should be referenced in the ATTRIBUTE Scope: ATTRIBUTE.TEXT ATTRIBUTE.BXHEIGHT ATTRIBUTE.BXWIDTH The good thing about CFModule is the tag can reside anywhere. Using the CF_MyTag approach, the tag must be in the custom tags directory specified in CF Administator. [EMAIL PROTECTED] 03/11/03 06:56AM Hi, I have a box that I created that appears multiple times in my template. The only thing that gets modified is the text and the width in pixels based on ths ize on my input box. Is it possible to create a custom tag where I can enter in only the text and width measurements? For examle: dialog text=Date Created width=156 input input input /dialog The above would draw a box around the input tags and insert the text appropriately. Below is the code I current;y use. !--- Start Date Created Box --- table border=0 cellpadding=12 cellspacing=0
RE: Macromedia DONT help me now. so where do i turn now?
Yes, thanks Dave, and the others who are giving me the benefit of their experience in these things. Dave I did see your advice about rebuilding the system. I took so long to build it the first time - only a couple of months ago, that I really want to exhaust all the other possibilities first. That's a BIG job for me - not really up to speed on XPPro things. However I'm fast running out of other things to try. This machine isn't just used for my web development. I have a really tiny business - just me - this machine does a multitude of jobs for me, my business, my family etc. Rebuilding it isn't a trivial task, but as I said, there aren't many other possibilities left to try. Thanks for your suggestions, and thanks for giving a damn. Cheers, Michael Kear Windsor, NSW, Australia AFP Webworks. -Original Message- From: Dave Lyons [mailto:[EMAIL PROTECTED] Sent: Wednesday, 12 March 2003 12:32 AM To: CF-Talk Subject: Re: Macromedia DONT help me now. so where do i turn now? a clean install is the best way to go, as I suggested too you a few days ago. but xp also has a repair feature to where it goes over your install and fixes its files but I'm not sure I'd trust that. - Original Message - From: Michael Kear [EMAIL PROTECTED] To: CF-Talk [EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 4:40 AM Subject: RE: Macromedia DONT help me now. so where do i turn now? I'm starting to think that perhaps the problem might lie in the Windows. Does anyone know if there is a self-repair kind of thing in WinXPPRo? If I do a reinstall, will it safely install with all my tweaks and setting or will it take me all the way back to the initial installation again and I'll have to reinstall all my apps again? Cheers, Michael Kear Windsor, NSW, Australia AFP Webworks. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Tuesday, 11 March 2003 4:02 PM To: CF-Talk Subject: Re: Macromedia DONT help me now. so where do i turn now? I'm just thinking along the lines that there may be something wrong with the computer, maybe a corrupted nic driver, or a somehow broken IIS install...I've seen both of those cause many strange problems. The Metabase can get corrupted, but IIS will still function to a point, and corrupted nic drivers can cause all sorts of odd things to happen. I've installed MX on 3 machines, some old, some new, and had problems, but nothing like what you are seeing, and haven't seen people mentioning this kind of problem, so the problem would seem to be with your setup somewhere.Trying to install on another system would at least give concrete proof that the problem is with the computer if it succeeds. At which point I'd say it's time for a Windows reinstall, or at least download a copy of Metaedit to make sure your IIS metabase isn't corrupt, and reinstall the nic drivers. Forgive me if I'm off base, I've followed the threads but there have been quite a few and I may have missed some relevant point. -- mailto:[EMAIL PROTECTED] Monday, March 10, 2003, 11:30:08 PM, you wrote: ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Your ad could be here. Monies from ads go to support these lists and provide more resources for the community. http://www.fusionauthority.com/ads.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
Custom Tag Question
I am creating a custom tag that will display the results of a query. I know there are already some out there, but I wanna do it myself. I have an attribute called queryname that i refer to in the call of the custom tag. cf_mytag queryname=get_users inside the custom tag i refer to it as attributes.queryname as in the following cfoutput query=#attributes.queryname# blah blah /cfoutput I keep getting the following error. Attribute validation error for tag cfoutput. The value of the attribute query, which is currently get_users, is invalid. The error occurred in C:\CFusionMX\CustomTags\tabledata.cfm: line 20 18 :th/thnbsp;/th 19 : /tr 20 :cfoutput query=#attributes.queryname# I have called the custom tag after the query. Does the custom tag still execute first? The custom tag appears before the query in debugging. If so what is a competent work around for this problem.? ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Get the mailserver that powers this list at http://www.coolfusion.com Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
RE: Custom Tag Question
That is because you did not pass the query to the custom tag, but the name of the query. You can fix this two ways. 1) In your custom tag, do cfoutput query=caller.#attributes.queryname#, however, in general, it's not good practice to refer to variables outside the custom tag. 2) Pass the actual query cf_mytag query=#get_users# Then your cfquery would be cfoutput query=attributes.query (Notice, no # marks.) === Raymond Camden, ColdFusion Jedi Master for Mindseye, Inc Member of Team Macromedia Email: [EMAIL PROTECTED] Blog : www.camdenfamily.com/morpheus/blog Yahoo IM : morpheus My ally is the Force, and a powerful ally it is. - Yoda -Original Message- From: John Stanley [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 8:29 AM To: CF-Talk Subject: Custom Tag Question I am creating a custom tag that will display the results of a query. I know there are already some out there, but I wanna do it myself. I have an attribute called queryname that i refer to in the call of the custom tag. cf_mytag queryname=get_users inside the custom tag i refer to it as attributes.queryname as in the following cfoutput query=#attributes.queryname# blah blah /cfoutput I keep getting the following error. Attribute validation error for tag cfoutput. The value of the attribute query, which is currently get_users, is invalid. The error occurred in C:\CFusionMX\CustomTags\tabledata.cfm: line 20 18 : th/thnbsp;/th 19 : /tr 20 : cfoutput query=#attributes.queryname# I have called the custom tag after the query. Does the custom tag still execute first? The custom tag appears before the query in debugging. If so what is a competent work around for this problem.? ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq This list and all House of Fusion resources hosted by CFHosting.com. The place for dependable ColdFusion Hosting. Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
OT:: Public (free) Newsfeeds...
Does anyone know of a resource for Martial Arts/Karate newsfeeds? Any links would be appreciated. Ché Vilnonis Application Developer Advertising Systems Incorporated 8470C Remington Avenue Pennsauken, NJ 08110 p: 856.488.2211 f: 856.488.1990 www.asitv.com ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Get the mailserver that powers this list at http://www.coolfusion.com Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
RE: Creating custom tag?
Your custom tags need to use Attributes.Foo instead of Foo. For example, change bxwidth to attributes.bxwidth. === Raymond Camden, ColdFusion Jedi Master for Mindseye, Inc Member of Team Macromedia Email: [EMAIL PROTECTED] Blog : www.camdenfamily.com/morpheus/blog Yahoo IM : morpheus My ally is the Force, and a powerful ally it is. - Yoda -Original Message- From: FlashGuy [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 7:15 AM To: CF-Talk Subject: Re: Creating custom tag? I'm not sure where to define the attributes. Below is my code split up into files (dialog_start.cfm, dialog_end.cfm) and test.cfm contains the CFMODULE stuff. What am I doing wrong? The CFMODULE attributes (bxtext, bxwidth) are not being inserted. dialog_start.cfm --- !--- Start Date Created Box --- table border=0 cellpadding=12 cellspacing=0 width=#bxwidth# tr td table border=0 cellpadding=0 cellspacing=0 tdimg src=cfoutput#Request.App.image_root#/cfoutputtbxl.gif width=2 height=17 border=0/td tdimg src=cfoutput#Request.App.image_root#/cfoutputtbxm.gif width=12 height=17 border=0/td td class=dialogheadcfoutputnbsp;#bxtext#nbsp;/cfoutput/td td width=bxwidth#img src=cfoutput#Request.App.image_root#/cfoutputtbxm.gif width=100% height=17 border=0/td tdimg src=cfoutput#Request.App.image_root#/cfoutputtbxr.gif width=2 height=17 border=0/td /tr tr tdimg src=cfoutput#Request.App.image_root#/cfoutputmbxl.gif width=2 height=100% border=0/td td colspan=3 width=#Request.Att.bxwidth# height=100% table border=0 cellpadding=8 cellspacing=0 tr td class=binputtype dialog_end.cfm --- /td /tr /table /td tdimg src=cfoutput#Request.App.image_root#/cfoutputmbxr.gif width=2 height=100% border=0/td /tr tr tdimg src=cfoutput#Request.App.image_root#/cfoutputbbxl.gif width=2 height=2 border=0/td td colspan=3img src=cfoutput#Request.App.image_root#/cfoutputmbxb.gif width=100% height=2 border=0/td tdimg src=cfoutput#Request.App.image_root#/cfoutputbbxr.gif width=2 height=2 border=0/td /tr /table /td /tr /table !--- End Date Created Box --- test.cfm --- CFMODULE TEMPLATE=dialog_start.cfm BXTEXT=Wicked BXWIDTH=140 cfoutput input type=text name=theTime value=nbsp;#DateFormat(todayDate, , dd, )# size=30 class=inputfield onfocus=this.blur(); input type=hidden name=theTime value=#DateFormat(todayDate, , dd, )# /cfoutput CFMODULE TEMPLATE=dialog_end.cfm On Tue, 11 Mar 2003 07:52:50 -0500, FlashGuy wrote: Opps...not quite. Would I put these in my application.cfm along with my APPLICATION. stuff? referenced in the ATTRIBUTE Scope: ATTRIBUTE.TEXT ATTRIBUTE.BXHEIGHT ATTRIBUTE.BXWIDTH On Tue, 11 Mar 2003 07:48:47 -0500, FlashGuy wrote: Correct. It works great. Thanks On Tue, 11 Mar 2003 07:47:01 -0500, Randell B Adkins wrote: Yes just considering that the dialog_start would be the beginning part of your tabel then your inputs are within that table elements itself. Then you will need to close your tables thus I am assuming that is the reason for the dialog_end [EMAIL PROTECTED] 03/11/03 07:25AM OK...so I don't have to do anything fancy. Just cut my code below into two files. Like so: CFMODULE TEMPLATE=../CustomTags/dialog_start.cfm TEXT=Whatever you want to say BXHEIGHT=100 BEWIDTH=200 input... input... input... CFMODULE TEMPLATE=../CustomTags/dialog_end.cfm ?? On Tue, 11 Mar 2003 07:20:11 -0500, Randell B Adkins wrote: Sure. You can call the CustomTag such as CF_MyTag or using CFModule: CustomTag: CF_MyTag Text=Whatever you want to say bxheight=100 bxwidth=200 CFMODULE TEMPLATE=../CustomTags/MyTag.cfm TEXT=Whatever you want to say BXHEIGHT=100 BEWIDTH=200 Just remember now in your custom tag that the values of TEXT, BXHEIGHT and BXWIDTH should be referenced in the ATTRIBUTE Scope: ATTRIBUTE.TEXT ATTRIBUTE.BXHEIGHT ATTRIBUTE.BXWIDTH The good thing about CFModule is the tag can reside anywhere. Using the CF_MyTag approach, the tag must be in the custom tags directory specified in CF Administator. [EMAIL PROTECTED] 03/11/03 06:56AM Hi, I have a box that I created that appears multiple times in my template. The only thing that gets modified is
Sorting XML without XSLT (Running it brain meltdown)
Hi again, I am reposting again in case anyone can elaborate on a solution. I am running in to brain meltdown and simple cannot figure out how to manipulate this data. I am storing XML in a SQL database and using GetContent.XmlFeed[getcontent.currentrow].contentdata.XmlChildren[1].date.XmlText as my retrieval method. Everything is working fine however, in some cases I can not use XSLT because of some formatting limitations (actually client peculiarities). Can anyone lend some help in explaining how I may sort this without XSLT? My page looks like this so far: table cellspacing=0 cellpadding=0 width=100% cfloop query=getcontent cfif GetContent.XmlFeed[getcontent.currentrow].contentdata.XmlChildren[1].live.XmlText eq yes OR url.status eq live tr td valign=top nowrap#DateFormat(XmlUnFormat(GetContent.XmlFeed[getcontent.currentrow].contentdata.XmlChildren[1].date.XmlText), ' DD, ')#/td td valign=topa href=/index.cfm/page/#getcontent.label#.htm#Ucase(XmlUnFormat(GetContent.XmlFeed[getcontent.currentrow].contentdata.XmlChildren[1].common.label.XmlText))#/abrnbsp;br/td /tr /cfif /cfloop /table It is working dandy, however, is there anyway I can sort this stuff (alpha, date, etc?) without XSLT? THANK YOU VERY MUCH!!! ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Your ad could be here. Monies from ads go to support these lists and provide more resources for the community. http://www.fusionauthority.com/ads.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
RE: Custom Tag Question
Try something LIKE this inside of your custom tag: cfset theQuery = caller.#attributes.queryname# cfoutput query=theQuery blah blah /cfoutput Thanks, André -Original Message- From: John Stanley [mailto:[EMAIL PROTECTED] Sent: 11 March 2003 14:29 To: CF-Talk Subject: Custom Tag Question I am creating a custom tag that will display the results of a query. I know there are already some out there, but I wanna do it myself. I have an attribute called queryname that i refer to in the call of the custom tag. cf_mytag queryname=get_users inside the custom tag i refer to it as attributes.queryname as in the following cfoutput query=#attributes.queryname# blah blah /cfoutput I keep getting the following error. Attribute validation error for tag cfoutput. The value of the attribute query, which is currently get_users, is invalid. The error occurred in C:\CFusionMX\CustomTags\tabledata.cfm: line 20 18 :th/thnbsp;/th 19 : /tr 20 :cfoutput query=#attributes.queryname# I have called the custom tag after the query. Does the custom tag still execute first? The custom tag appears before the query in debugging. If so what is a competent work around for this problem.? ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Signup for the Fusion Authority news alert and keep up with the latest news in ColdFusion and related topics. http://www.fusionauthority.com/signup.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
Re: Lockdown CFMX
On Tuesday 11 Mar 2003 09:45 am, Shahzad.Butt wrote: Does someone know how to lock down Coldfusion Server? Idea is that we are going to be on internet through https. Now we need to secure our server. We'd already locked down IIS etc, only bit left is to secure Coldfusion Server. What sort of vulnerabilities we can have through our CFMX server. Uninstall the example apps and doc's (cfdocs dir). Limit acces to the CFIDE/administrator dir (CFIDE needs to be world accesable if using cfform). Set at least on deduging IP (127.0.0.1 is good), and ensure debugging is off. Never read the logs via the administrator. -- Tom C Land of the free, home of the brave... you have to be brave to live there and enjoy the freedoms ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Signup for the Fusion Authority news alert and keep up with the latest news in ColdFusion and related topics. http://www.fusionauthority.com/signup.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
session timeout clarification
Folks -- a colleague of mine asked me to help him with some changes to the way he was treating his session variables, but in doing so, I've run into something of a misunderstanding of how I *thought* session variables worked. Specifically, in the test code below, I would expect that 1) when you came to index.cfm (the home page of the site), you would get fresh session info; 2) when the session timed out, you would automatically get fresh cfid/cftoken info; 3) when pasting a url with *old* cfid/cftoken session info, you would automatically be delivered new cfid/cftoken session info 4) after a session times out, when coming to the home page again, you'd get fresh session info. #1 and #4 are definitely happening, but #2 and #3 are definitely NOT happening. (And yes, I also pushed down the max default timeouts in my cf admin to match the low timeouts in the test code below.) Instead, the pages happily accept the old, clearly expired, cfid/cftoken session combos. So, -- are my expectations wrong? -- or am I missing something that I should be doing in the code? -- or both, perhaps? I'm willing to accept any or all at this point -- just hoping that someone can point me in the right direction. * Application.cfm ** cfapplication name=test sessionmanagement=Yes setclientcookies=No sessiontimeout=#CreateTimeSpan(0,0,0,5)# cfif IsDefined(Cookie.CFID) and IsDefined(Cookie.CFTOKEN) cfcookie name=CFID value=#Cookie.CFID# cfcookie name=CFTOKEN value=#Cookie.CFTOKEN# cfelse cflock scope=SESSION type=READONLY timeout=1 cfcookie name=CFID value=#session.CFID# cfcookie name=CFTOKEN value=#session.CFTOKEN# /cflock /cfif * index.cfm ** cfoutput a href=dsp_page2.cfm?CFID=#Cookie.CFID#CFTOKEN=#Cookie.CFTOKEN#Click here to get to page 2/a /cfoutput *** dsp_page2.cfm ** cfoutput a href=index.cfm?CFID=#Cookie.CFID#CFTOKEN=#Cookie.CFTOKEN#Click here to get to page 1/a /cfoutput *** Kelly Tetterton Technical Lead - duoDesign One Web Company. Twice the Results. 847.491.3000 | main 847.491.7125 | direct 847.491.3100 | fax [EMAIL PROTECTED] www.duodesign.com ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq This list and all House of Fusion resources hosted by CFHosting.com. The place for dependable ColdFusion Hosting. Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
RE: Custom Tag Question
Raymond, thank you very much for your help. that was it. -Original Message- From: Raymond Camden [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 9:38 AM To: CF-Talk Subject: RE: Custom Tag Question That is because you did not pass the query to the custom tag, but the name of the query. You can fix this two ways. 1) In your custom tag, do cfoutput query=caller.#attributes.queryname#, however, in general, it's not good practice to refer to variables outside the custom tag. 2) Pass the actual query cf_mytag query=#get_users# Then your cfquery would be cfoutput query=attributes.query (Notice, no # marks.) === Raymond Camden, ColdFusion Jedi Master for Mindseye, Inc Member of Team Macromedia Email: [EMAIL PROTECTED] Blog : www.camdenfamily.com/morpheus/blog Yahoo IM : morpheus My ally is the Force, and a powerful ally it is. - Yoda -Original Message- From: John Stanley [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 8:29 AM To: CF-Talk Subject: Custom Tag Question I am creating a custom tag that will display the results of a query. I know there are already some out there, but I wanna do it myself. I have an attribute called queryname that i refer to in the call of the custom tag. cf_mytag queryname=get_users inside the custom tag i refer to it as attributes.queryname as in the following cfoutput query=#attributes.queryname# blah blah /cfoutput I keep getting the following error. Attribute validation error for tag cfoutput. The value of the attribute query, which is currently get_users, is invalid. The error occurred in C:\CFusionMX\CustomTags\tabledata.cfm: line 20 18 : th/thnbsp;/th 19 : /tr 20 : cfoutput query=#attributes.queryname# I have called the custom tag after the query. Does the custom tag still execute first? The custom tag appears before the query in debugging. If so what is a competent work around for this problem.? ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Your ad could be here. Monies from ads go to support these lists and provide more resources for the community. http://www.fusionauthority.com/ads.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
Re: Macromedia DONT help me now. so where do i turn now?
believe me I know how you feel! I have gone through it many times! haha but in the end its a good habit to do. I run several companies off of my comp, so the rebuilding used to takes several days, I have gotten it down to a few hours now. heres what i do go get a stack of cdr's then I make a folder on my desk top and start copying the files i need into the folder. I make special note of coping the WHOLE Inetpub files as well so I dont lose any of my sites and my db folder. all the other stuff I have is pretty easy to find and copy to the folder. the biggest problems I have are (1) my emails. I use outlook express or outlook. I recent found a program that makes a real nice back up of them and saving them all and restoring are a breeze. and (2) losing my settings in DWMX. Use this free tool to save exactly how you have DWMX set up. http://www.joexx.de/DW-Exporter/download_en.php AWESOME tool!! and free too. then start burning that file to disks. The other thing i do is I went to a computer store and asked if I could have an extra copy of the 2 disks that come with a new hard drive. They are nice cause you just put them in and its completely sets up your hard drive ready for the install. Dont have to debug fdisk when you use them. Most people will just give you them for free. then do your install and put on IIS and them studio or DWMX whatever you have then CFMX . Then take your disk that has your saved Inetpub on it and copy it over the existing one. THEN BE SURE TO SET YOU FILE PERMISSIONS FOR SHARING Then I install the http://www.joexx.de/DW-Exporter/download_en.php and copy the back up to my documents and import the settings back into dreamweaver and then give it a try. Almost always runs like a charm. That way you have it up and working before anything else and it shouldnt have any conflicts the rest of the way. One thing i have noticed is that a lot of people have trouble with DW but it has rarely been because DWMX was the problem. Most always its xp pro, IIS or some 3rd party server like apache. Sometimes I have to install and reinstall IIS a few times. But my problem lies with it having troubles running ASP pages not Coldfusion. I actually install CFMX to run on IIS, instead of standalone. And the funny thing is that a lot of times the asp pages wont run but the coldfusion ones always do. hope it helps and you get back in the swing! dave - Original Message - From: Michael Kear [EMAIL PROTECTED] To: CF-Talk [EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 9:10 AM Subject: RE: Macromedia DONT help me now. so where do i turn now? Yes, thanks Dave, and the others who are giving me the benefit of their experience in these things. Dave I did see your advice about rebuilding the system. I took so long to build it the first time - only a couple of months ago, that I really want to exhaust all the other possibilities first. That's a BIG job for me - not really up to speed on XPPro things. However I'm fast running out of other things to try. This machine isn't just used for my web development. I have a really tiny business - just me - this machine does a multitude of jobs for me, my business, my family etc. Rebuilding it isn't a trivial task, but as I said, there aren't many other possibilities left to try. Thanks for your suggestions, and thanks for giving a damn. Cheers, Michael Kear Windsor, NSW, Australia AFP Webworks. -Original Message- From: Dave Lyons [mailto:[EMAIL PROTECTED] Sent: Wednesday, 12 March 2003 12:32 AM To: CF-Talk Subject: Re: Macromedia DONT help me now. so where do i turn now? a clean install is the best way to go, as I suggested too you a few days ago. but xp also has a repair feature to where it goes over your install and fixes its files but I'm not sure I'd trust that. - Original Message - From: Michael Kear [EMAIL PROTECTED] To: CF-Talk [EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 4:40 AM Subject: RE: Macromedia DONT help me now. so where do i turn now? I'm starting to think that perhaps the problem might lie in the Windows. Does anyone know if there is a self-repair kind of thing in WinXPPRo? If I do a reinstall, will it safely install with all my tweaks and setting or will it take me all the way back to the initial installation again and I'll have to reinstall all my apps again? Cheers, Michael Kear Windsor, NSW, Australia AFP Webworks. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Tuesday, 11 March 2003 4:02 PM To: CF-Talk Subject: Re: Macromedia DONT help me now. so where do i turn now? I'm just thinking along the lines that there may be something wrong with the computer, maybe a corrupted nic driver, or a somehow broken IIS install...I've seen both of those cause many strange problems. The Metabase can get corrupted, but IIS will still function to a point, and corrupted nic drivers can cause all
Re: Custom Tag Question
cf_mytag queryname=#get_users# Looks like you need to put # around the variable that you are passing to the tag otherwise the tag will see it as a text string. - Original Message - From: John Stanley [EMAIL PROTECTED] To: CF-Talk [EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 7:28 AM Subject: Custom Tag Question I am creating a custom tag that will display the results of a query. I know there are already some out there, but I wanna do it myself. I have an attribute called queryname that i refer to in the call of the custom tag. cf_mytag queryname=get_users inside the custom tag i refer to it as attributes.queryname as in the following cfoutput query=#attributes.queryname# blah blah /cfoutput I keep getting the following error. Attribute validation error for tag cfoutput. The value of the attribute query, which is currently get_users, is invalid. The error occurred in C:\CFusionMX\CustomTags\tabledata.cfm: line 20 18 : th/thnbsp;/th 19 : /tr 20 : cfoutput query=#attributes.queryname# I have called the custom tag after the query. Does the custom tag still execute first? The custom tag appears before the query in debugging. If so what is a competent work around for this problem.? ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Structure your ColdFusion code with Fusebox. Get the official book at http://www.fusionauthority.com/bkinfo.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
RE: Creating custom tag?
That worked. Thanks On Tue, 11 Mar 2003 08:39:28 -0600, Raymond Camden wrote: Your custom tags need to use Attributes.Foo instead of Foo. For example, change bxwidth to attributes.bxwidth. === Raymond Camden, ColdFusion Jedi Master for Mindseye, Inc Member of Team Macromedia Email: [EMAIL PROTECTED] Blog : www.camdenfamily.com/morpheus/blog Yahoo IM : morpheus My ally is the Force, and a powerful ally it is. - Yoda -Original Message- From: FlashGuy [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 7:15 AM To: CF-Talk Subject: Re: Creating custom tag? I'm not sure where to define the attributes. Below is my code split up into files (dialog_start.cfm, dialog_end.cfm) and test.cfm contains the CFMODULE stuff. What am I doing wrong? The CFMODULE attributes (bxtext, bxwidth) are not being inserted. dialog_start.cfm --- !--- Start Date Created Box --- table border=0 cellpadding=12 cellspacing=0 width=#bxwidth# tr td table border=0 cellpadding=0 cellspacing=0 tdimg src=cfoutput#Request.App.image_root#/cfoutputtbxl.gif width=2 height=17 border=0/td tdimg src=cfoutput#Request.App.image_root#/cfoutputtbxm.gif width=12 height=17 border=0/td td class=dialogheadcfoutputnbsp;#bxtext#nbsp;/cfoutput/td td width=bxwidth#img src=cfoutput#Request.App.image_root#/cfoutputtbxm.gif width=100% height=17 border=0/td tdimg src=cfoutput#Request.App.image_root#/cfoutputtbxr.gif width=2 height=17 border=0/td /tr tr tdimg src=cfoutput#Request.App.image_root#/cfoutputmbxl.gif width=2 height=100% border=0/td td colspan=3 width=#Request.Att.bxwidth# height=100% table border=0 cellpadding=8 cellspacing=0 tr td class=binputtype dialog_end.cfm --- /td /tr /table /td tdimg src=cfoutput#Request.App.image_root#/cfoutputmbxr.gif width=2 height=100% border=0/td /tr tr tdimg src=cfoutput#Request.App.image_root#/cfoutputbbxl.gif width=2 height=2 border=0/td td colspan=3img src=cfoutput#Request.App.image_root#/cfoutputmbxb.gif width=100% height=2 border=0/td tdimg src=cfoutput#Request.App.image_root#/cfoutputbbxr.gif width=2 height=2 border=0/td /tr /table /td /tr /table !--- End Date Created Box --- test.cfm --- CFMODULE TEMPLATE=dialog_start.cfm BXTEXT=Wicked BXWIDTH=140 cfoutput input type=text name=theTime value=nbsp;#DateFormat(todayDate, , dd, )# size=30 class=inputfield onfocus=this.blur(); input type=hidden name=theTime value=#DateFormat(todayDate, , dd, )# /cfoutput CFMODULE TEMPLATE=dialog_end.cfm On Tue, 11 Mar 2003 07:52:50 -0500, FlashGuy wrote: Opps...not quite. Would I put these in my application.cfm along with my APPLICATION. stuff? referenced in the ATTRIBUTE Scope: ATTRIBUTE.TEXT ATTRIBUTE.BXHEIGHT ATTRIBUTE.BXWIDTH On Tue, 11 Mar 2003 07:48:47 -0500, FlashGuy wrote: Correct. It works great. Thanks On Tue, 11 Mar 2003 07:47:01 -0500, Randell B Adkins wrote: Yes just considering that the dialog_start would be the beginning part of your tabel then your inputs are within that table elements itself. Then you will need to close your tables thus I am assuming that is the reason for the dialog_end [EMAIL PROTECTED] 03/11/03 07:25AM OK...so I don't have to do anything fancy. Just cut my code below into two files. Like so: CFMODULE TEMPLATE=../CustomTags/dialog_start.cfm TEXT=Whatever you want to say BXHEIGHT=100 BEWIDTH=200 input... input... input... CFMODULE TEMPLATE=../CustomTags/dialog_end.cfm ?? On Tue, 11 Mar 2003 07:20:11 -0500, Randell B Adkins wrote: Sure. You can call the CustomTag such as CF_MyTag or using CFModule: CustomTag: CF_MyTag Text=Whatever you want to say bxheight=100 bxwidth=200 CFMODULE TEMPLATE=../CustomTags/MyTag.cfm TEXT=Whatever you want to say BXHEIGHT=100 BEWIDTH=200 Just remember now in your custom tag that the values of TEXT, BXHEIGHT and BXWIDTH should be referenced in the ATTRIBUTE Scope: ATTRIBUTE.TEXT ATTRIBUTE.BXHEIGHT ATTRIBUTE.BXWIDTH The good thing about CFModule is the tag can reside anywhere. Using the CF_MyTag approach, the tag must be in the
RE: Lockdown CFMX
Why not read the logs via the administrator? How else should I read my logs? -Original Message- From: Thomas Chiverton [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 9:41 AM To: CF-Talk Subject: Re: Lockdown CFMX On Tuesday 11 Mar 2003 09:45 am, Shahzad.Butt wrote: Does someone know how to lock down Coldfusion Server? Idea is that we are going to be on internet through https. Now we need to secure our server. We'd already locked down IIS etc, only bit left is to secure Coldfusion Server. What sort of vulnerabilities we can have through our CFMX server. Uninstall the example apps and doc's (cfdocs dir). Limit acces to the CFIDE/administrator dir (CFIDE needs to be world accesable if using cfform). Set at least on deduging IP (127.0.0.1 is good), and ensure debugging is off. Never read the logs via the administrator. -- Tom C Land of the free, home of the brave... you have to be brave to live there and enjoy the freedoms ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq This list and all House of Fusion resources hosted by CFHosting.com. The place for dependable ColdFusion Hosting. Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
RE: Lockdown CFMX
Tom C wrote: Never read the logs via the administrator. I haven't heard this before. What is the reason? Pam ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq This list and all House of Fusion resources hosted by CFHosting.com. The place for dependable ColdFusion Hosting. Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
RE: cfgrid issues
I have the same problem. Old cfgrid worked (slow) and I could insert, delete, and update. Now I can not update -- the form fields do not get filled out correctly. I have asked about this on several different forums, but no one answers. These people have a product that is supposed to be good. http://216.74.28.185/products/cfgrid/index.cfm -Original Message- From: charlie griefer [mailto:[EMAIL PROTECTED] Sent: Monday, March 10, 2003 2:21 PM To: CF-Talk Subject: cfgrid issues Hey All: Having some issues with cfgrid. I inherited this application that uses cfgrid to allow certain staff members to update a db table directly. This was built on CF 4.5, and we're now on 5.0 (we have been for around 6 months now). I don't know if it just broke now (which would be weird), or if I just wasn't made aware of it since our upgrade. In any event, I'm getting an error on the form's action page. I'm outputting a #cfcatch.message#, and getting 'Grid crossref not found' (crossref being the name of the grid on the form page). A cfdump var=#form# shows a field named crossref, but no value in it (I do have the enablecab=yes attribute in the cfform). I also just replaced the cfjava2.jar file in webroot\cfide\classes with one that I downloaded from MM's site (as noted in technote 17998 located at http://www.macromedia.com/support/coldfusion/ts/documents/tn17998.htm). Still, no success. I have very little experience with cfform and the java form controls, so I'm not sure where to even begin with troubleshooting/debugging this. Any advice would be greatly appreciated. Thx, Charlie ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Structure your ColdFusion code with Fusebox. Get the official book at http://www.fusionauthority.com/bkinfo.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
Re: Sorting XML without XSLT (Running it brain meltdown)
On Tuesday 11 Mar 2003 14:39 pm, Michael J. Sammut wrote: Can anyone lend some help in explaining how I may sort this without XSLT? Create a list of all the primary key id's of the record set, sorted by whatever you need, then loop over that list and pull out the records with it. i.e. var listSorted=; output records insertSort(this.id); loop over listSorted output record given by id The tricky bit is insertSort() - you'll need to write something to add the current id to listSorted, with it's locationbased on the value of something else in the record. A structure like sorted[].id sorted[].value may make this easier. -- Tom C Land of the free, home of the brave... you have to be brave to live there and enjoy the freedoms ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Get the mailserver that powers this list at http://www.coolfusion.com Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
Re: Macromedia DONT help me now. so where do i turn now?
Something to consider -- buy a spare hard drive, pull out your current one, put in the new one, and start your installation process. If you need to get back to business, stop at a convenient point in the installation process, shut down your PC, and switch back to your old hard drive. Shoot me a ticket to NSW and I'll take care of it for you :-) (I'm growing weary of Winter in the Northeastern US) Pete - Original Message - From: Michael Kear [EMAIL PROTECTED] To: CF-Talk [EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 9:10 AM Subject: RE: Macromedia DONT help me now. so where do i turn now? Yes, thanks Dave, and the others who are giving me the benefit of their experience in these things. Dave I did see your advice about rebuilding the system. I took so long to build it the first time - only a couple of months ago, that I really want to exhaust all the other possibilities first. That's a BIG job for me - not really up to speed on XPPro things. However I'm fast running out of other things to try. This machine isn't just used for my web development. I have a really tiny business - just me - this machine does a multitude of jobs for me, my business, my family etc. Rebuilding it isn't a trivial task, but as I said, there aren't many other possibilities left to try. Thanks for your suggestions, and thanks for giving a damn. Cheers, Michael Kear Windsor, NSW, Australia AFP Webworks. -Original Message- From: Dave Lyons [mailto:[EMAIL PROTECTED] Sent: Wednesday, 12 March 2003 12:32 AM To: CF-Talk Subject: Re: Macromedia DONT help me now. so where do i turn now? a clean install is the best way to go, as I suggested too you a few days ago. but xp also has a repair feature to where it goes over your install and fixes its files but I'm not sure I'd trust that. - Original Message - From: Michael Kear [EMAIL PROTECTED] To: CF-Talk [EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 4:40 AM Subject: RE: Macromedia DONT help me now. so where do i turn now? I'm starting to think that perhaps the problem might lie in the Windows. Does anyone know if there is a self-repair kind of thing in WinXPPRo? If I do a reinstall, will it safely install with all my tweaks and setting or will it take me all the way back to the initial installation again and I'll have to reinstall all my apps again? Cheers, Michael Kear Windsor, NSW, Australia AFP Webworks. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Tuesday, 11 March 2003 4:02 PM To: CF-Talk Subject: Re: Macromedia DONT help me now. so where do i turn now? I'm just thinking along the lines that there may be something wrong with the computer, maybe a corrupted nic driver, or a somehow broken IIS install...I've seen both of those cause many strange problems. The Metabase can get corrupted, but IIS will still function to a point, and corrupted nic drivers can cause all sorts of odd things to happen. I've installed MX on 3 machines, some old, some new, and had problems, but nothing like what you are seeing, and haven't seen people mentioning this kind of problem, so the problem would seem to be with your setup somewhere.Trying to install on another system would at least give concrete proof that the problem is with the computer if it succeeds. At which point I'd say it's time for a Windows reinstall, or at least download a copy of Metaedit to make sure your IIS metabase isn't corrupt, and reinstall the nic drivers. Forgive me if I'm off base, I've followed the threads but there have been quite a few and I may have missed some relevant point. -- mailto:[EMAIL PROTECTED] Monday, March 10, 2003, 11:30:08 PM, you wrote: ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Structure your ColdFusion code with Fusebox. Get the official book at http://www.fusionauthority.com/bkinfo.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
Re: OT:: Public (free) Newsfeeds...
Have you looked at http://www.newsisfree.com ? David Groth, Analyst/Programmer III HSC Library Informatics Center, University of New Mexico 505.272.8406 e-mail: [EMAIL PROTECTED] [EMAIL PROTECTED] 03/11/03 07:38AM Does anyone know of a resource for Martial Arts/Karate newsfeeds? Any links would be appreciated. Ché Vilnonis Application Developer Advertising Systems Incorporated 8470C Remington Avenue Pennsauken, NJ 08110 p: 856.488.2211 f: 856.488.1990 www.asitv.com ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Structure your ColdFusion code with Fusebox. Get the official book at http://www.fusionauthority.com/bkinfo.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
RE: Lockdown CFMX
Never read the logs via the administrator. ? I never heard this one before. Why not? Doug -Original Message- From: Thomas Chiverton [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 9:41 AM To: CF-Talk Subject: Re: Lockdown CFMX On Tuesday 11 Mar 2003 09:45 am, Shahzad.Butt wrote: Does someone know how to lock down Coldfusion Server? Idea is that we are going to be on internet through https. Now we need to secure our server. We'd already locked down IIS etc, only bit left is to secure Coldfusion Server. What sort of vulnerabilities we can have through our CFMX server. Uninstall the example apps and doc's (cfdocs dir). Limit acces to the CFIDE/administrator dir (CFIDE needs to be world accesable if using cfform). Set at least on deduging IP (127.0.0.1 is good), and ensure debugging is off. -- Tom C Land of the free, home of the brave... you have to be brave to live there and enjoy the freedoms ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq This list and all House of Fusion resources hosted by CFHosting.com. The place for dependable ColdFusion Hosting. Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
Re: Lockdown CFMX
On Tuesday 11 Mar 2003 14:55 pm, Scott Wilhelm wrote: Why not read the logs via the administrator? Because Evil Hacker can insert anything they like in them, unless Macromedia have tidied that one up recently. And if I can do that, on IE, I own you ;-) On Netscape/Mozilla it isn't as bad, but I could still perform a cross site scripting attack or something, probably. I've not looked into it very seriously, but it is generally a bad thing to view logs through a web browser, especially if they do silly things like look up domain names from IPs. How else should I read my logs? I find vi and grep helpful. -- Tom C Land of the free, home of the brave... you have to be brave to live there and enjoy the freedoms ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Your ad could be here. Monies from ads go to support these lists and provide more resources for the community. http://www.fusionauthority.com/ads.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
RE: Macromedia DONT help me now. so where do i turn now?
On that line (which has nothing to do with your problem). On a couple of our multi-purpose machines (sometimes used as dev servers, sometimes used as testing machines, etc) we have hard-drive drawers installed, and we've bought the cheapest, smallest drives we could find. The drawer hardware is super cheap, and that way I can slide in the XP Pro dev disk and work on that, and if I need to do some testing on NT 4 workstation, I just swap the drive and turn it on. Considering I've never seen another company utilize these drawers, it must not be very widespread, but it's a great saver when we have a limited number of machines that we are allowed to play with. Josh -Original Message- From: Pete Ruckelshaus [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 10:06 AM To: CF-Talk Subject: Re: Macromedia DONT help me now. so where do i turn now? Something to consider -- buy a spare hard drive, pull out your current one, put in the new one, and start your installation process. If you need to get back to business, stop at a convenient point in the installation process, shut down your PC, and switch back to your old hard drive. Shoot me a ticket to NSW and I'll take care of it for you :-) (I'm growing weary of Winter in the Northeastern US) Pete - Original Message - From: Michael Kear [EMAIL PROTECTED] To: CF-Talk [EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 9:10 AM Subject: RE: Macromedia DONT help me now. so where do i turn now? Yes, thanks Dave, and the others who are giving me the benefit of their experience in these things. Dave I did see your advice about rebuilding the system. I took so long to build it the first time - only a couple of months ago, that I really want to exhaust all the other possibilities first. That's a BIG job for me - not really up to speed on XPPro things. However I'm fast running out of other things to try. This machine isn't just used for my web development. I have a really tiny business - just me - this machine does a multitude of jobs for me, my business, my family etc. Rebuilding it isn't a trivial task, but as I said, there aren't many other possibilities left to try. Thanks for your suggestions, and thanks for giving a damn. Cheers, Michael Kear Windsor, NSW, Australia AFP Webworks. -Original Message- From: Dave Lyons [mailto:[EMAIL PROTECTED] Sent: Wednesday, 12 March 2003 12:32 AM To: CF-Talk Subject: Re: Macromedia DONT help me now. so where do i turn now? a clean install is the best way to go, as I suggested too you a few days ago. but xp also has a repair feature to where it goes over your install and fixes its files but I'm not sure I'd trust that. - Original Message - From: Michael Kear [EMAIL PROTECTED] To: CF-Talk [EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 4:40 AM Subject: RE: Macromedia DONT help me now. so where do i turn now? I'm starting to think that perhaps the problem might lie in the Windows. Does anyone know if there is a self-repair kind of thing in WinXPPRo? If I do a reinstall, will it safely install with all my tweaks and setting or will it take me all the way back to the initial installation again and I'll have to reinstall all my apps again? Cheers, Michael Kear Windsor, NSW, Australia AFP Webworks. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Tuesday, 11 March 2003 4:02 PM To: CF-Talk Subject: Re: Macromedia DONT help me now. so where do i turn now? I'm just thinking along the lines that there may be something wrong with the computer, maybe a corrupted nic driver, or a somehow broken IIS install...I've seen both of those cause many strange problems. The Metabase can get corrupted, but IIS will still function to a point, and corrupted nic drivers can cause all sorts of odd things to happen. I've installed MX on 3 machines, some old, some new, and had problems, but nothing like what you are seeing, and haven't seen people mentioning this kind of problem, so the problem would seem to be with your setup somewhere.Trying to install on another system would at least give concrete proof that the problem is with the computer if it succeeds. At which point I'd say it's time for a Windows reinstall, or at least download a copy of Metaedit to make sure your IIS metabase isn't corrupt, and reinstall the nic drivers. Forgive me if I'm off base, I've followed the threads but there have been quite a few and I may have missed some relevant point. -- mailto:[EMAIL PROTECTED] Monday, March 10, 2003, 11:30:08 PM, you wrote: ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Your ad could be here. Monies from ads go to
RE: ASP.NET
Why do you favor c# over VB by so much? KP -Original Message- From: Gary W. Sullivan II [mailto:[EMAIL PROTECTED] Sent: Monday, March 10, 2003 6:38 PM To: CF-Talk Subject: RE: ASP.NET As a MCAD.NET, I can safely recommend the majority of MS Press books dealing with .NET, seeing as those are the only materials I used to study for the exams. It seems as though you've made up your mind to go with VB.NET, but I would strongly encourage you learning C# instead. Also, Apress has some incredible advanced .NET books out (COM and .NET Interoperability, Advanced .NET Remoting, etc) and some really cool ones on the way (the Apress books usually deal with C#, though). With the exception of the Design to Deployment books, STAY AWAY from Wrox, as they try to cover too much info in too short of a book to really grasp the concepts and methods of the .NET languages and framework. MS Press books are incredible as beginner and intermediate books. Just my 3 cents, Gary Sullivan MCAD.NET -Original Message- From: Jeremy Bunton [mailto:[EMAIL PROTECTED] Sent: Monday, March 10, 2003 2:38 PM To: CF-Talk Subject: ASP.NET Hello, Odd spot to ask this question but here goes. I am CF user have been for a few years now, but I wishing to branch out a little and widen my knowledge to the use of asp.net. Not that I am leaving CF. I have been looking on amazon for books and don't really see anything that stands out to me. I have done just a little bit of .asp a few years back but none since so I am looking for something that fits my lack of asp knowledge. Right now ASP.NET Unleashed seems to be a good choice. I'll definitely be heading the vb direction. Any recommendations from people that use to be in my shoes. Jeremy -Original Message- From: Cantrell, Adam [mailto:[EMAIL PROTECTED] Sent: Monday, March 10, 2003 1:29 PM To: CF-Talk Subject: Dreamweaver changing code on me I've been gradually moving to DreamweaverMX as my web IDE... just because. Today I was writing (hand coding) a form in code-view. I saved it to my web server and tried running it - didn't work correctly. Looked at the HTML source... WTF - what's all this garbage in here? I opened the file up in CFstudio and it appears that dreamweaver took the liberty of putting it's own tags in there. This is really bad for me... how do I set dreamweaver to save ONLY the code I've written in code view. I need to turn off its proprietary mark-up. Here's what it converted a simple xfa variable into: MM:BeginLock translatorClass=MM_COLDFUSION type=DynData depFiles= orig=%23xfa.pageDescription%23 MM_DYNAMIC_CONTENT SOURCE=xfa.pageDescription DYNAMICDATA=1MM:DECORATION HILITECOLOR=Dyn Untranslated Color{xfa.pageDescription}/MM:DECORATION/MM_DYNAMIC_CONTENTMM:End Lock Help!! Adam. ps... the buttons in my toolbars are all greyed out... CFMLBasic, CFMLflow, CFMLAdvanced, etc. Is there a reason for this? ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Structure your ColdFusion code with Fusebox. Get the official book at http://www.fusionauthority.com/bkinfo.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
FW: ASP.NET
Which MS Press book would you recommend as the best to start with? -Original Message- From: Gary W. Sullivan II [mailto:[EMAIL PROTECTED] Sent: Monday, March 10, 2003 6:38 PM To: CF-Talk Subject: RE: ASP.NET As a MCAD.NET, I can safely recommend the majority of MS Press books dealing with .NET, seeing as those are the only materials I used to study for the exams. It seems as though you've made up your mind to go with VB.NET, but I would strongly encourage you learning C# instead. Also, Apress has some incredible advanced .NET books out (COM and .NET Interoperability, Advanced .NET Remoting, etc) and some really cool ones on the way (the Apress books usually deal with C#, though). With the exception of the Design to Deployment books, STAY AWAY from Wrox, as they try to cover too much info in too short of a book to really grasp the concepts and methods of the .NET languages and framework. MS Press books are incredible as beginner and intermediate books. Just my 3 cents, Gary Sullivan MCAD.NET -Original Message- From: Jeremy Bunton [mailto:[EMAIL PROTECTED] Sent: Monday, March 10, 2003 2:38 PM To: CF-Talk Subject: ASP.NET Hello, Odd spot to ask this question but here goes. I am CF user have been for a few years now, but I wishing to branch out a little and widen my knowledge to the use of asp.net. Not that I am leaving CF. I have been looking on amazon for books and don't really see anything that stands out to me. I have done just a little bit of .asp a few years back but none since so I am looking for something that fits my lack of asp knowledge. Right now ASP.NET Unleashed seems to be a good choice. I'll definitely be heading the vb direction. Any recommendations from people that use to be in my shoes. Jeremy -Original Message- From: Cantrell, Adam [mailto:[EMAIL PROTECTED] Sent: Monday, March 10, 2003 1:29 PM To: CF-Talk Subject: Dreamweaver changing code on me I've been gradually moving to DreamweaverMX as my web IDE... just because. Today I was writing (hand coding) a form in code-view. I saved it to my web server and tried running it - didn't work correctly. Looked at the HTML source... WTF - what's all this garbage in here? I opened the file up in CFstudio and it appears that dreamweaver took the liberty of putting it's own tags in there. This is really bad for me... how do I set dreamweaver to save ONLY the code I've written in code view. I need to turn off its proprietary mark-up. Here's what it converted a simple xfa variable into: MM:BeginLock translatorClass=MM_COLDFUSION type=DynData depFiles= orig=%23xfa.pageDescription%23 MM_DYNAMIC_CONTENT SOURCE=xfa.pageDescription DYNAMICDATA=1MM:DECORATION HILITECOLOR=Dyn Untranslated Color{xfa.pageDescription}/MM:DECORATION/MM_DYNAMIC_CONTENTMM:End Lock Help!! Adam. ps... the buttons in my toolbars are all greyed out... CFMLBasic, CFMLflow, CFMLAdvanced, etc. Is there a reason for this? ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Structure your ColdFusion code with Fusebox. Get the official book at http://www.fusionauthority.com/bkinfo.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
RE: Lockdown CFMX
Well... if your code is crap the application log can be pretty dang big g. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 9:03 AM To: CF-Talk Subject: RE: Lockdown CFMX Never read the logs via the administrator. ? I never heard this one before. Why not? Doug -Original Message- From: Thomas Chiverton [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 9:41 AM To: CF-Talk Subject: Re: Lockdown CFMX On Tuesday 11 Mar 2003 09:45 am, Shahzad.Butt wrote: Does someone know how to lock down Coldfusion Server? Idea is that we are going to be on internet through https. Now we need to secure our server. We'd already locked down IIS etc, only bit left is to secure Coldfusion Server. What sort of vulnerabilities we can have through our CFMX server. Uninstall the example apps and doc's (cfdocs dir). Limit acces to the CFIDE/administrator dir (CFIDE needs to be world accesable if using cfform). Set at least on deduging IP (127.0.0.1 is good), and ensure debugging is off. -- Tom C Land of the free, home of the brave... you have to be brave to live there and enjoy the freedoms ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Get the mailserver that powers this list at http://www.coolfusion.com Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
Re: Lockdown CFMX
On Tuesday 11 Mar 2003 15:10 pm, Thomas Chiverton wrote: On Tuesday 11 Mar 2003 14:55 pm, Scott Wilhelm wrote: Why not read the logs via the administrator? Also, do you *know* there isn't a buffer overflow or something in ColdFusion's log displayer ? -- Tom C Land of the free, home of the brave... you have to be brave to live there and enjoy the freedoms ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Your ad could be here. Monies from ads go to support these lists and provide more resources for the community. http://www.fusionauthority.com/ads.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
Re: Lockdown CFMX
On Tuesday 11 Mar 2003 15:22 pm, Mark A. Kruger - CFG wrote: Well... if your code is crap the application log can be pretty dang big Indeed, that was a DoS for CF4 wasn't it ? CFMX seems much better though - it pages the file for instance. -- Tom C Land of the free, home of the brave... you have to be brave to live there and enjoy the freedoms ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq This list and all House of Fusion resources hosted by CFHosting.com. The place for dependable ColdFusion Hosting. Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
RE: Javascript Signed Scripting Re: window.close question?
I'll re-post this because it was about 4am when I posted and you may have missed this. You CAN do this without a signed script: Just change the window opener's reference to TOP and then you can close it. script window.open('popup.html','popWin','width=300,height=300'); window.opener=top; window.close(); /script This doesn't work on IE5 or Netscape 4.7x but it works on all other IE/NS variations. I saw this link yesterday while looking for some ActionScript reference. http://aspalliance.com/peterbrunone/impossible.asp HTH Joshua Miller Head Programmer / IT Manager Garrison Enterprises Inc. www.garrisonenterprises.net [EMAIL PROTECTED] (704) 569-9044 ext. 254 * Any views expressed in this message are those of the individual sender, except where the sender states them to be the views of Garrison Enterprises Inc. This e-mail is intended only for the individual or entity to which it is addressed and contains information that is private and confidential. If you are not the intended recipient you are hereby notified that any dissemination, distribution or copying is strictly prohibited. If you have received this e-mail in error please delete it immediately and advise us by return e-mail to [EMAIL PROTECTED] * -Original Message- From: James Blaha [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 8:41 AM To: CF-Talk Subject: Re: Javascript Signed Scripting Re: window.close question? Jann, Thanks a million for the information. I'll look through it all soon. Regards, James Blaha Jann VanOver wrote: Mozilla has a write up on signed javascripting: http://www.mozilla.org/projects/security/components/signed-scripts.html There's an old (Netscape 4.0) article here: http://polaris.umuc.edu/~mgaylor/SignedScripts.html And some Netscape/Gekko notes at http://devedge.netscape.com/central/security/ AND http://devedge.netscape.com/viewsource/2002/bypassing-security-restrict ions/ On 3/9/03 1:48 PM, James Blaha [EMAIL PROTECTED] wrote: Jeff, Jann Critz, Thank you all very much for your input and time. I¹m working on an intranet application so I¹m not worried about security for the user¹s browser. Jann do you know how this would be done in a secure, signed, scripting environment? If you do can you please email me an example if you have one handy otherwise I found a work around for my issue so I can put an end to this thread. Thanks again! Regards, James Blaha Jann VanOver wrote: On 3/7/03 10:30 AM, James Blaha [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] wrote: Hello All: JavaScript Question I need to have JavaScript code work for Netscape 4.7 to open a child window and close the parent and bypass the confirm message. [snip] You should not be able to do this unless you are in a secure, signed, scripting environment. Period. What you are asking invades the user's privacy. When you close the parent, you lose all their page history information -- this is why the confirmation message appears. The confirmation message will always appear if you programmatically try to close a window that the user opened. I am a bit shocked that the code you give doesn't launch a confirmation message in IE and Netscape 6-7. You must have your user privacy settings lower in those browsers. Can someone please send me an example? This code works in IE and Netscape 6-7 but not Netscape 4.7 !--- SCRIPT LANGUAGE = JavaScript { newwin=window.open(Login.cfm,_blank,... ) firstwindow = window.self; firstwindow.opener = window.self; firstwindow.close(); newwin.focus() } /SCRIPT --- ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Structure your ColdFusion code with Fusebox. Get the official book at http://www.fusionauthority.com/bkinfo.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
Re: cfgrid issues
Hey Jack: Thanks for the reply. I finally gave up and just built a straight web interface for the app. The link looks very cool tho. Got it bookmarked for the future :) Thanks again, charlie Jack Ince writes: I have the same problem. Old cfgrid worked (slow) and I could insert, delete, and update. Now I can not update -- the form fields do not get filled out correctly. I have asked about this on several different forums, but no one answers. These people have a product that is supposed to be good. http://216.74.28.185/products/cfgrid/index.cfm -Original Message- From: charlie griefer [mailto:[EMAIL PROTECTED] Sent: Monday, March 10, 2003 2:21 PM To: CF-Talk Subject: cfgrid issues Hey All: Having some issues with cfgrid. I inherited this application that uses cfgrid to allow certain staff members to update a db table directly. This was built on CF 4.5, and we're now on 5.0 (we have been for around 6 months now). I don't know if it just broke now (which would be weird), or if I just wasn't made aware of it since our upgrade. In any event, I'm getting an error on the form's action page. I'm outputting a #cfcatch.message#, and getting 'Grid crossref not found' (crossref being the name of the grid on the form page). A cfdump var=#form# shows a field named crossref, but no value in it (I do have the enablecab=yes attribute in the cfform). I also just replaced the cfjava2.jar file in webroot\cfide\classes with one that I downloaded from MM's site (as noted in technote 17998 located at http://www.macromedia.com/support/coldfusion/ts/documents/tn17998.htm). Still, no success. I have very little experience with cfform and the java form controls, so I'm not sure where to even begin with troubleshooting/debugging this. Any advice would be greatly appreciated. Thx, Charlie ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq This list and all House of Fusion resources hosted by CFHosting.com. The place for dependable ColdFusion Hosting. Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
Re: cfgrid issues
On Tuesday 11 Mar 2003 14:52 pm, Jack Ince wrote: These people have a product that is supposed to be good. http://216.74.28.185/products/cfgrid/index.cfm I hope it's better than the pricing calculator and examples on their front page. The drop down in the calcualtor wont let me click it. The examples window pops up a message about being IE only. Useless. I'd throw the URL away on principle. -- Tom C Land of the free, home of the brave... you have to be brave to live there and enjoy the freedoms ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Structure your ColdFusion code with Fusebox. Get the official book at http://www.fusionauthority.com/bkinfo.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
Re: Javascript Signed Scripting Re: window.close question?
Cool solution for an intranet! Thanks for the tip. Dave - Original Message - From: Joshua Miller [EMAIL PROTECTED] To: CF-Talk [EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 10:35 AM Subject: RE: Javascript Signed Scripting Re: window.close question? I'll re-post this because it was about 4am when I posted and you may have missed this. You CAN do this without a signed script: Just change the window opener's reference to TOP and then you can close it. script window.open('popup.html','popWin','width=300,height=300'); window.opener=top; window.close(); /script This doesn't work on IE5 or Netscape 4.7x but it works on all other IE/NS variations. I saw this link yesterday while looking for some ActionScript reference. http://aspalliance.com/peterbrunone/impossible.asp HTH Joshua Miller Head Programmer / IT Manager Garrison Enterprises Inc. www.garrisonenterprises.net [EMAIL PROTECTED] (704) 569-9044 ext. 254 * Any views expressed in this message are those of the individual sender, except where the sender states them to be the views of Garrison Enterprises Inc. This e-mail is intended only for the individual or entity to which it is addressed and contains information that is private and confidential. If you are not the intended recipient you are hereby notified that any dissemination, distribution or copying is strictly prohibited. If you have received this e-mail in error please delete it immediately and advise us by return e-mail to [EMAIL PROTECTED] * -Original Message- From: James Blaha [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 8:41 AM To: CF-Talk Subject: Re: Javascript Signed Scripting Re: window.close question? Jann, Thanks a million for the information. I'll look through it all soon. Regards, James Blaha Jann VanOver wrote: Mozilla has a write up on signed javascripting: http://www.mozilla.org/projects/security/components/signed-scripts.html There's an old (Netscape 4.0) article here: http://polaris.umuc.edu/~mgaylor/SignedScripts.html And some Netscape/Gekko notes at http://devedge.netscape.com/central/security/ AND http://devedge.netscape.com/viewsource/2002/bypassing-security-restrict ions/ On 3/9/03 1:48 PM, James Blaha [EMAIL PROTECTED] wrote: Jeff, Jann Critz, Thank you all very much for your input and time. I¹m working on an intranet application so I¹m not worried about security for the user¹s browser. Jann do you know how this would be done in a secure, signed, scripting environment? If you do can you please email me an example if you have one handy otherwise I found a work around for my issue so I can put an end to this thread. Thanks again! Regards, James Blaha Jann VanOver wrote: On 3/7/03 10:30 AM, James Blaha [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] wrote: Hello All: JavaScript Question I need to have JavaScript code work for Netscape 4.7 to open a child window and close the parent and bypass the confirm message. [snip] You should not be able to do this unless you are in a secure, signed, scripting environment. Period. What you are asking invades the user's privacy. When you close the parent, you lose all their page history information -- this is why the confirmation message appears. The confirmation message will always appear if you programmatically try to close a window that the user opened. I am a bit shocked that the code you give doesn't launch a confirmation message in IE and Netscape 6-7. You must have your user privacy settings lower in those browsers. Can someone please send me an example? This code works in IE and Netscape 6-7 but not Netscape 4.7 !--- SCRIPT LANGUAGE = JavaScript { newwin=window.open(Login.cfm,_blank,... ) firstwindow = window.self; firstwindow.opener = window.self; firstwindow.close(); newwin.focus() } /SCRIPT --- ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq This list and all House of Fusion resources hosted by CFHosting.com. The place for dependable ColdFusion Hosting. Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
RE: cfgrid issues
LOL! I would suggest rolling your own 'grid'. That's what we did. CFGRID is quirky and depends on a certain JRE versiona real PITA actually. Plus, every customer that sees it wants it to do more than it can. So we wrote an HTML version. It isn't hard really, but doesn't have client-side sorting, but you can add that via something like this http://webfx.eae.net/dhtml/tablesort/demo.html http://webfx.eae.net/dhtml/grid/intro.html The VERY basic idea is dynamically naming your form controls input type=text name=foo_n where n is 1 to n rows. Doug -Original Message- From: Thomas Chiverton [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 11:19 AM To: CF-Talk Subject: Re: cfgrid issues On Tuesday 11 Mar 2003 14:52 pm, Jack Ince wrote: These people have a product that is supposed to be good. http://216.74.28.185/products/cfgrid/index.cfm I hope it's better than the pricing calculator and examples on their front page. The drop down in the calcualtor wont let me click it. The examples window pops up a message about being IE only. Useless. I'd throw the URL away on principle. -- Tom C Land of the free, home of the brave... you have to be brave to live there and enjoy the freedoms ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Structure your ColdFusion code with Fusebox. Get the official book at http://www.fusionauthority.com/bkinfo.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
Re: Macromedia DONT help me now. so where do i turn now?
Rebuilding a machine is a pain no matter how you approach it (although some people have offered some good advice here that will make things easier). There is a delicate balance between backing up as many files as possible to make the restoration as easy as possible, but also making sure you avoid any of the files that you suspect might be corrupt and the cause of the problems you are having. I recently had a hard drive failure with my Mac, and after spending an entire weekend getting up and running again, I bought a 100GB firewire drive, which will make life much easier should this ever occur again. Christian On Tuesday, March 11, 2003, at 09:10 AM, Michael Kear wrote: Yes, thanks Dave, and the others who are giving me the benefit of their experience in these things. Dave I did see your advice about rebuilding the system. I took so long to build it the first time - only a couple of months ago, that I really want to exhaust all the other possibilities first. That's a BIG job for me - not really up to speed on XPPro things. However I'm fast running out of other things to try. This machine isn't just used for my web development. I have a really tiny business - just me - this machine does a multitude of jobs for me, my business, my family etc. Rebuilding it isn't a trivial task, but as I said, there aren't many other possibilities left to try. Thanks for your suggestions, and thanks for giving a damn. Cheers, Michael Kear Windsor, NSW, Australia AFP Webworks. ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Signup for the Fusion Authority news alert and keep up with the latest news in ColdFusion and related topics. http://www.fusionauthority.com/signup.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
Re: Dreamweaver changing code on me
if i was you i'd consider uninstalling and reinstalling dwmx. check out this link http://www.joexx.de/DW-Exporter/download_en.php that will make it a breeze i think it will cure your woes I took your advice and now things looke to be Kosher. The one thing I have not done yet is go in and play with creating my own Keyboard Shortcuts because I think that's where things went bad last time. But for anybody who might run in to this problem, at the very least this is what I did to get working again: 1. Ran the DW-Exporter utility recommeded (great tool!) 2. Add/Remove Programs - Uninstall DWMX 3. Ran RegEdit to look for lingering Dreamweaver keys (only found some in the file associations options) 4. Re-booted for posterity! 5. Ran Installer for DW 6.0 6. Opened DWMX to see if problems were still present (they weren't) 7. Close DWMX and installed 6.1 updater 8. Re-imported backed-up Sites via DW-Exporter tool (though not the config files) 9. Opened DWMX and all was well As I said, I'm thinking that things went south when I went o make copies of Keyboard Shortcuts to set up my own preferences. I'm gonna wait to test that part till later. But those steps should at least get you a fully-function product. I'll let you know how the Shortcuts part goes later on. Regards, Dave. ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Structure your ColdFusion code with Fusebox. Get the official book at http://www.fusionauthority.com/bkinfo.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
My First CF Site (Critique Request)
Sorry if this is a bit OT, but I was hoping to get some feedback on my first CF site: http://makeover.sllboces.org It's a remake of http://www.sllboces.org. The whole intention was to organize the links better, make the site synamic, make it easier to manage (there's CMS-like application that the site's backended to), as well as update it (the updating part hasn't quite happened yet, but the staff has the tools...you know how that goes..lol). Any all comments would be greatly appreciated (positive negative). Thanks! Scott Scott Wilhelm Computer Technician/Web Developer http://www.sllboces.org http://www.sllboces.org/ [EMAIL PROTECTED] Canton (Mon/Tue) St. Lawrence-Lewis BOCES PO Box 231, 139 State Street Road Canton, NY 13617 P. 315-386-4504 x 164 F. 315-386-3395 Heuvelton (Wed/Thu/Fri) Heuvelton Central School PO Box 375, 87 Washington Street Heuvelton, NY 13654 P. 315-344-2414 x 3651?xml:namespace prefix = o ns = urn:schemas-microsoft-com:office:office / ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Your ad could be here. Monies from ads go to support these lists and provide more resources for the community. http://www.fusionauthority.com/ads.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
RE: Sorting XML without XSLT (Running it brain meltdown)
Michael, Remember, XSLT doesn't just mean XML to XHTML--you could use XSLT to retransform the XML packet into a sorted XML packet and then run your CF logic on the new sorted packet. I believe I've seen a solution posted here: http://www.dpawson.co.uk/xsl/sect2/sect21.html If not, you should be able to piece one together based upon that information found on the site. There's a ton of answers to common XSLT dilemmas/questions. -Dan -Original Message- From: Michael J. Sammut [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 9:40 AM To: CF-Talk Subject: Sorting XML without XSLT (Running it brain meltdown) Hi again, I am reposting again in case anyone can elaborate on a solution. I am running in to brain meltdown and simple cannot figure out how to manipulate this data. I am storing XML in a SQL database and using GetContent.XmlFeed[getcontent.currentrow].contentdata.XmlChildren[1].date. XmlText as my retrieval method. Everything is working fine however, in some cases I can not use XSLT because of some formatting limitations (actually client peculiarities). Can anyone lend some help in explaining how I may sort this without XSLT? My page looks like this so far: table cellspacing=0 cellpadding=0 width=100% cfloop query=getcontent cfif GetContent.XmlFeed[getcontent.currentrow].contentdata.XmlChildren[1].live. XmlText eq yes OR url.status eq live tr td valign=top nowrap#DateFormat(XmlUnFormat(GetContent.XmlFeed[getcontent.currentrow].c ontentdata.XmlChildren[1].date.XmlText), ' DD, ')#/td td valign=topa href=/index.cfm/page/#getcontent.label#.htm#Ucase(XmlUnFormat(GetConten t.XmlFeed[getcontent.currentrow].contentdata.XmlChildren[1].common.label.X mlText))#/abrnbsp;br/td /tr /cfif /cfloop /table It is working dandy, however, is there anyway I can sort this stuff (alpha, date, etc?) without XSLT? THANK YOU VERY MUCH!!! ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Get the mailserver that powers this list at http://www.coolfusion.com Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
DSN Issue's
Here is an excerpt from an email or DBA sent. Can someone help point me in the right direction. Thanks ¯-- how does Cold Fusion decide on wheather to use Named Pipe or Tcpip? Last week when I changed client configuration for one DSN, it chagned all the others. Is this the way it supposed to be? Is there a way to trace more information about SQL Server Connection from Cold fusion. For example, if we want to look at all the connections that are opened by one DSN, can we take a look at it? This would help us with monitoring why we are having connection problem to SQL Server. Yi ¯- ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Structure your ColdFusion code with Fusebox. Get the official book at http://www.fusionauthority.com/bkinfo.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
Re: DSN Issue's
This guy changed client configuration for one DSN? I'm not sure what he means by that. Changing one setting in one DSN does not change any other DSN settings other than the one you are editing. Unless there is some kind of MX bug involved that is... To answer the second part, just use a different user account for each DSN... -- jon mailto:[EMAIL PROTECTED] Tuesday, March 11, 2003, 12:11:05 PM, you wrote: MR Here is an excerpt from an email or DBA sent. Can someone help point me in the right direction. MR Thanks MR ¯-- MR how does Cold Fusion decide on wheather to use Named Pipe or Tcpip? MR Last week when I changed client configuration for one DSN, it chagned all the others. Is this the way it supposed to be? MR Is there a way to trace more information about SQL Server Connection from Cold fusion. For example, if we want to look at all the connections that are opened by one DSN, can we take a look at MR it? This would help us with monitoring why we are having connection problem to SQL Server. MR Yi ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Structure your ColdFusion code with Fusebox. Get the official book at http://www.fusionauthority.com/bkinfo.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
Re: My First CF Site (Critique Request)
Overall it looks great to me. Just a couple things. The Times font gets hard to read at smaller sizes...you might try at Tahoma, Veranda, or Georgia. The dark green hover makes the link text hard to read. portal.cfm throws a CF error if I pass an invalid id in the url. Putting an error handler on the site it a good way to keep errors from being seen by the public and letting you fix them before they complain :) This one is great. http://www.macromedia.com/cfusion/exchange/index.cfm#view=sn131viewName=ColdFusion%2520Extensionloc=en_usextID=1001525lc_id=97630 -- jon mailto:[EMAIL PROTECTED] Tuesday, March 11, 2003, 11:59:21 AM, you wrote: SW Sorry if this is a bit OT, but I was hoping to get some feedback on my SW first CF site: http://makeover.sllboces.org SW It's a remake of http://www.sllboces.org. The whole intention was to SW organize the links better, make the site synamic, make it easier to SW manage (there's CMS-like application that the site's backended to), as SW well as update it (the updating part hasn't quite happened yet, but the SW staff has the tools...you know how that goes..lol). SW Any all comments would be greatly appreciated (positive negative). SW Thanks! SW Scott SW Scott Wilhelm SW Computer Technician/Web Developer SW http://www.sllboces.org http://www.sllboces.org/ SW [EMAIL PROTECTED] SW Canton (Mon/Tue) SW St. Lawrence-Lewis BOCES SW PO Box 231, 139 State Street Road SW Canton, NY 13617 SW P. 315-386-4504 x 164 SW F. 315-386-3395 SW Heuvelton (Wed/Thu/Fri) SW Heuvelton Central School SW PO Box 375, 87 Washington Street SW Heuvelton, NY 13654 SW P. 315-344-2414 x 3651?xml:namespace prefix = o ns = SW urn:schemas-microsoft-com:office:office / SW ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Structure your ColdFusion code with Fusebox. Get the official book at http://www.fusionauthority.com/bkinfo.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
ReadyHosting.com alternatives?
I have a couple of sites hosted at www.readyhosting.com. Their CF servers have been down more than not in the past few days, with no responses from their tech support. Calling them get's me put onto a hold queue for an extended period. So, I'm looking for alternatives that offer similar features for a similar price. Specifically they offer 500MB storage, Unlimited DSNs (though I only need 3 or 4) and Cold Fusion services for $99 US per year. The downside is that they only support CF 4.5, but I can live with that if needed. Any suggestions for something comparable - I would prefer CF5.0 but can live with 4.5. If it helps any, one of the sites is a charitable, non-profit organization. Thanks for any tips. Shawn ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq This list and all House of Fusion resources hosted by CFHosting.com. The place for dependable ColdFusion Hosting. Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
RE: ReadyHosting.com alternatives?
Geez, I always felt like I was the only one having problems w/ them. Don't forget about the unlimited email option as well... Scott -Original Message- From: Shawn Grover [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 12:40 PM To: CF-Talk Subject: ReadyHosting.com alternatives? I have a couple of sites hosted at www.readyhosting.com. Their CF servers have been down more than not in the past few days, with no responses from their tech support. Calling them get's me put onto a hold queue for an extended period. So, I'm looking for alternatives that offer similar features for a similar price. Specifically they offer 500MB storage, Unlimited DSNs (though I only need 3 or 4) and Cold Fusion services for $99 US per year. The downside is that they only support CF 4.5, but I can live with that if needed. Any suggestions for something comparable - I would prefer CF5.0 but can live with 4.5. If it helps any, one of the sites is a charitable, non-profit organization. Thanks for any tips. Shawn ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq This list and all House of Fusion resources hosted by CFHosting.com. The place for dependable ColdFusion Hosting. Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
RE: ReadyHosting.com alternatives?
check out www.uplinkearth.com -Original Message- From: Scott Wilhelm [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 12:40 PM To: CF-Talk Subject: RE: ReadyHosting.com alternatives? Geez, I always felt like I was the only one having problems w/ them. Don't forget about the unlimited email option as well... Scott -Original Message- From: Shawn Grover [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 12:40 PM To: CF-Talk Subject: ReadyHosting.com alternatives? I have a couple of sites hosted at www.readyhosting.com. Their CF servers have been down more than not in the past few days, with no responses from their tech support. Calling them get's me put onto a hold queue for an extended period. So, I'm looking for alternatives that offer similar features for a similar price. Specifically they offer 500MB storage, Unlimited DSNs (though I only need 3 or 4) and Cold Fusion services for $99 US per year. The downside is that they only support CF 4.5, but I can live with that if needed. Any suggestions for something comparable - I would prefer CF5.0 but can live with 4.5. If it helps any, one of the sites is a charitable, non-profit organization. Thanks for any tips. Shawn ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq This list and all House of Fusion resources hosted by CFHosting.com. The place for dependable ColdFusion Hosting. Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
RE: My First CF Site (Critique Request)
-Original Message- From: Scott Wilhelm [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 11:59 AM To: CF-Talk Subject: My First CF Site (Critique Request) Sorry if this is a bit OT, but I was hoping to get some feedback on my first CF site: http://makeover.sllboces.org For what they're worth: 1) The body and link text is REALLY, REALLY small. Too small to read comfortably. Also you've set your font sizes up in a such a way that the browser contols for resizing the text do NOT work. This is most likely because you used pixel sizes in the style sheet. Consider either using relative sizes in the sheet or making mutliple versions of the style sheet available for use by people that need larger text. 3) I would really consider moving your menu to the top of the page. It's nice and experimental and all, but is your audience really experimental? If (as I think it is) your audience may NOT be advanced computer users make it as easy for them as possible and adopt a plain vanilla structure: menu at the top, logo in the upper right, etc. 4) At least on my screens (LCDs) the text of the Of Interest links is illegible when being moused-over (the green is too overpowering). 5) The logo is just gi-freakin'-normous - but it's very simple. I would consider shrinking it down personally. The image of the interested guy is nice - I would probably push something like that larger before the logo. 6) If you shrunk the logo and moved things around you might then consider taking the Quick Links out of a single select box and using multiple boxes (one per group). This would allow people to eliminate a lot of the scrolling needed in that box (right now there are 10 screens of links within that select box). Also the text for that select is also REALLY, REALLY small. Also you might link to a single, plain HTML page with all of those links for those that like to see all their options in front of them. I also wouldn't repeat the quick links in two different places as you have. For the inner pages: 1) I would drop your back link. It's cute, but completely redundant and doesn't offer anything - again I would REALLY consider moving the menu to the TOP of the page. That's about it off the top of my head. Damn I'm a picky bastard. Jim Davis ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Get the mailserver that powers this list at http://www.coolfusion.com Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
Re: ReadyHosting.com alternatives?
Take a look at www.coldfusionhosts.net if you like. There are a number of US based CF hosted listed. Regards Jim - Original Message - From: Shawn Grover [EMAIL PROTECTED] To: CF-Talk [EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 5:40 PM Subject: ReadyHosting.com alternatives? I have a couple of sites hosted at www.readyhosting.com. Their CF servers have been down more than not in the past few days, with no responses from their tech support. Calling them get's me put onto a hold queue for an extended period. So, I'm looking for alternatives that offer similar features for a similar price. Specifically they offer 500MB storage, Unlimited DSNs (though I only need 3 or 4) and Cold Fusion services for $99 US per year. The downside is that they only support CF 4.5, but I can live with that if needed. Any suggestions for something comparable - I would prefer CF5.0 but can live with 4.5. If it helps any, one of the sites is a charitable, non-profit organization. Thanks for any tips. Shawn ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq This list and all House of Fusion resources hosted by CFHosting.com. The place for dependable ColdFusion Hosting. Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
Re: ReadyHosting.com alternatives?
Hi Shawn: For the price, I cannot say enough good things about Nexpoint. They have a $99/yr package that includes: CF 5 unlimited ODBC datasources (Access) unlimited e-mail unmetered bandwidth 500MB storage PHP ASP etc They also offer SQL Server 2k for an additional $25/yr (whereas most other places would charge that per month). Caveat is that they really are not up 99.9% (as I believe they guarantee). But the downtime hasn't been excessive at all (in fact, I am not aware of any downtime in the past 6 months or so). When the system does go down, it comes up again fairly quickly (none of the outages that I can recall were for extended periods of time). I've also submitted trouble tickets at 2 am on Saturday and gotten responses and resolutions by 3 am. I'm not associated with these guys...I make nothing for recommending them. I just really am *that* pleased with the overall service and price. See the $99/yr plan here: http://www.nexpoint.net/products/shared/winspecial.cfm charlie Shawn Grover writes: I have a couple of sites hosted at www.readyhosting.com. Their CF servers have been down more than not in the past few days, with no responses from their tech support. Calling them get's me put onto a hold queue for an extended period. So, I'm looking for alternatives that offer similar features for a similar price. Specifically they offer 500MB storage, Unlimited DSNs (though I only need 3 or 4) and Cold Fusion services for $99 US per year. The downside is that they only support CF 4.5, but I can live with that if needed. Any suggestions for something comparable - I would prefer CF5.0 but can live with 4.5. If it helps any, one of the sites is a charitable, non-profit organization. Thanks for any tips. Shawn ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq This list and all House of Fusion resources hosted by CFHosting.com. The place for dependable ColdFusion Hosting. Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
Another Verity Search Problem
This morning, my customer complained that he wasnt getting the desired search results. After research, I have determined that the index was in fact not being indexed! Looking at the sysinfo.log the following message appears for each document within the collection: Error: E0-720 (I/O Filter): Could not load filter 'flt_kv -recognize' which is named in your style.uni file. Error: E2-0531 (Document Index): Document 1 (document path): Unable to index document - SKIPPING. Now my collection indexing thru CFAdministrator tells me that the collection was indexing successfully. I have looked in the CFUSION/VERITY/FILTERS folder and there is nothing there. Can anyone help? ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq This list and all House of Fusion resources hosted by CFHosting.com. The place for dependable ColdFusion Hosting. Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
RE: ReadyHosting.com alternatives?
If anyone is interested in CFMX hosting with HELM control panel I am more then willing to give you space on my server. Send me an email off list if you want to talk about it. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 12:52 PM To: CF-Talk Subject: Re: ReadyHosting.com alternatives? Take a look at www.coldfusionhosts.net if you like. There are a number of US based CF hosted listed. Regards Jim - Original Message - From: Shawn Grover [EMAIL PROTECTED] To: CF-Talk [EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 5:40 PM Subject: ReadyHosting.com alternatives? I have a couple of sites hosted at www.readyhosting.com. Their CF servers have been down more than not in the past few days, with no responses from their tech support. Calling them get's me put onto a hold queue for an extended period. So, I'm looking for alternatives that offer similar features for a similar price. Specifically they offer 500MB storage, Unlimited DSNs (though I only need 3 or 4) and Cold Fusion services for $99 US per year. The downside is that they only support CF 4.5, but I can live with that if needed. Any suggestions for something comparable - I would prefer CF5.0 but can live with 4.5. If it helps any, one of the sites is a charitable, non-profit organization. Thanks for any tips. Shawn ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq This list and all House of Fusion resources hosted by CFHosting.com. The place for dependable ColdFusion Hosting. Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
Re: Dreamweaver changing code on me
I can always help with non-cf issues lol - Original Message - From: Dave Carabetta [EMAIL PROTECTED] To: CF-Talk [EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 11:56 AM Subject: Re: Dreamweaver changing code on me if i was you i'd consider uninstalling and reinstalling dwmx. check out this link http://www.joexx.de/DW-Exporter/download_en.php that will make it a breeze i think it will cure your woes I took your advice and now things looke to be Kosher. The one thing I have not done yet is go in and play with creating my own Keyboard Shortcuts because I think that's where things went bad last time. But for anybody who might run in to this problem, at the very least this is what I did to get working again: 1. Ran the DW-Exporter utility recommeded (great tool!) 2. Add/Remove Programs - Uninstall DWMX 3. Ran RegEdit to look for lingering Dreamweaver keys (only found some in the file associations options) 4. Re-booted for posterity! 5. Ran Installer for DW 6.0 6. Opened DWMX to see if problems were still present (they weren't) 7. Close DWMX and installed 6.1 updater 8. Re-imported backed-up Sites via DW-Exporter tool (though not the config files) 9. Opened DWMX and all was well As I said, I'm thinking that things went south when I went o make copies of Keyboard Shortcuts to set up my own preferences. I'm gonna wait to test that part till later. But those steps should at least get you a fully-function product. I'll let you know how the Shortcuts part goes later on. Regards, Dave. ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq This list and all House of Fusion resources hosted by CFHosting.com. The place for dependable ColdFusion Hosting. Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
Re: ReadyHosting.com alternatives?
Check out http://www.clickdoug.com 99% up time - supports CF 5.0 - non-profits are half price supports all mainstream database products - unlimited email accounts was a nominee in the CFDJ hosting awards. Highly rated on the Ben Forta Web site. Hosts CF user groups free = Douglas White group Manager mailto:[EMAIL PROTECTED] http://www.samcfug.org = - Original Message - From: John Stanley [EMAIL PROTECTED] To: CF-Talk [EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 11:41 AM Subject: RE: ReadyHosting.com alternatives? | check out www.uplinkearth.com | | -Original Message- | From: Scott Wilhelm [mailto:[EMAIL PROTECTED] | Sent: Tuesday, March 11, 2003 12:40 PM | To: CF-Talk | Subject: RE: ReadyHosting.com alternatives? | | | Geez, I always felt like I was the only one having problems w/ them. | | Don't forget about the unlimited email option as well... | | Scott | | | -Original Message- | From: Shawn Grover [mailto:[EMAIL PROTECTED] | Sent: Tuesday, March 11, 2003 12:40 PM | To: CF-Talk | Subject: ReadyHosting.com alternatives? | | | I have a couple of sites hosted at www.readyhosting.com. | Their CF servers | have been down more than not in the past few days, with no | responses from | their tech support. Calling them get's me put onto a hold | queue for an | extended period. | | So, I'm looking for alternatives that offer similar features | for a similar | price. Specifically they offer 500MB storage, Unlimited DSNs | (though I only | need 3 or 4) and Cold Fusion services for $99 US per year. | The downside is | that they only support CF 4.5, but I can live with that if needed. | | Any suggestions for something comparable - I would prefer | CF5.0 but can live | with 4.5. If it helps any, one of the sites is a charitable, | non-profit | organization. | | Thanks for any tips. | | Shawn | | | ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq This list and all House of Fusion resources hosted by CFHosting.com. The place for dependable ColdFusion Hosting. Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
RE: ReadyHosting.com alternatives?
Just wanted to say thank you for all the responses! It's good to know the support is out there, and that I'm not the only one suffering through this.. :D Shawn -Original Message- From: samcfug [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 11:16 AM To: CF-Talk Subject: Re: ReadyHosting.com alternatives? Check out http://www.clickdoug.com 99% up time - supports CF 5.0 - non-profits are half price supports all mainstream database products - unlimited email accounts was a nominee in the CFDJ hosting awards. Highly rated on the Ben Forta Web site. Hosts CF user groups free = Douglas White group Manager mailto:[EMAIL PROTECTED] http://www.samcfug.org = - Original Message - From: John Stanley [EMAIL PROTECTED] To: CF-Talk [EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 11:41 AM Subject: RE: ReadyHosting.com alternatives? | check out www.uplinkearth.com | | -Original Message- | From: Scott Wilhelm [mailto:[EMAIL PROTECTED] | Sent: Tuesday, March 11, 2003 12:40 PM | To: CF-Talk | Subject: RE: ReadyHosting.com alternatives? | | | Geez, I always felt like I was the only one having problems w/ them. | | Don't forget about the unlimited email option as well... | | Scott | | | -Original Message- | From: Shawn Grover [mailto:[EMAIL PROTECTED] | Sent: Tuesday, March 11, 2003 12:40 PM | To: CF-Talk | Subject: ReadyHosting.com alternatives? | | | I have a couple of sites hosted at www.readyhosting.com. | Their CF servers | have been down more than not in the past few days, with no | responses from | their tech support. Calling them get's me put onto a hold | queue for an | extended period. | | So, I'm looking for alternatives that offer similar features | for a similar | price. Specifically they offer 500MB storage, Unlimited DSNs | (though I only | need 3 or 4) and Cold Fusion services for $99 US per year. | The downside is | that they only support CF 4.5, but I can live with that if needed. | | Any suggestions for something comparable - I would prefer | CF5.0 but can live | with 4.5. If it helps any, one of the sites is a charitable, | non-profit | organization. | | Thanks for any tips. | | Shawn | | | ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq This list and all House of Fusion resources hosted by CFHosting.com. The place for dependable ColdFusion Hosting. Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
moving CFIDE folder
What configuration parameter do I need to change to allow me to move my CFIDE folder from \wwwroot\CFIDE to \inetpub\wwwroot\CFIDE? I tried just moving it but it gave me errors so I've put it back for now. *** The information in this e-mail is confidential and intended solely for the individual or entity to whom it is addressed. If you have received this e-mail in error please notify the sender by return e-mail, delete this e-mail, and refrain from any disclosure or action based on the information. ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq This list and all House of Fusion resources hosted by CFHosting.com. The place for dependable ColdFusion Hosting. Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
RE: Another Verity Search Problem
Hi I don't know exactly what the problem is, but the Verity style and filter stuff has to do with extracting content from files of different types (extensions, mime types)... there might be a filter for .txt or .html or .doc, etc. It is possible that there is an unrecognized file extension somewhere in the index path. The style filters are configurable through files located in the cfusion\verity\common directory, but it is not something that most people ever need to look at. The cfusion\verity\_nti40\bin directory has the dlls and other stuff that verity needs, and flt_kv.dll should be there. Too bad you don't get a better error message... Mark -Original Message- From: Bill keziah [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 12:50 PM To: CF-Talk Subject: Another Verity Search Problem This morning, my customer complained that he wasnt getting the desired search results. After research, I have determined that the index was in fact not being indexed! Looking at the sysinfo.log the following message appears for each document within the collection: Error: E0-720 (I/O Filter): Could not load filter 'flt_kv -recognize' which is named in your style.uni file. Error: E2-0531 (Document Index): Document 1 (document path): Unable to index document - SKIPPING. Now my collection indexing thru CFAdministrator tells me that the collection was indexing successfully. I have looked in the CFUSION/VERITY/FILTERS folder and there is nothing there. Can anyone help? ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq This list and all House of Fusion resources hosted by CFHosting.com. The place for dependable ColdFusion Hosting. Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
Re: moving CFIDE folder
if your using IIS, you need to edit the path of the folder in IIS. [EMAIL PROTECTED] 03/11/03 01:32PM What configuration parameter do I need to change to allow me to move my CFIDE folder from \wwwroot\CFIDE to \inetpub\wwwroot\CFIDE? I tried just moving it but it gave me errors so I've put it back for now. *** The information in this e-mail is confidential and intended solely for the individual or entity to whom it is addressed. If you have received this e-mail in error please notify the sender by return e-mail, delete this e-mail, and refrain from any disclosure or action based on the information. ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq This list and all House of Fusion resources hosted by CFHosting.com. The place for dependable ColdFusion Hosting. Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
cfc cfstoredproc
Hi, How do we pass the result set of a cfstoredproc call to a cfc? TIA, Ro ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Signup for the Fusion Authority news alert and keep up with the latest news in ColdFusion and related topics. http://www.fusionauthority.com/signup.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
scheduling application in cf?
Hello everyone. I am interested in developing a registration / scheduling form which would allow the user to select classes and check for time conflicts. I remember back when I registered for DevCon2002, there was a very nice conference registration form which checked for available seats / time conflicts. It was much nicer than what I would need at this point, although I would love to eventually head that way. Do any of you know of existing scheduling systems using html and cold fusion / or do you have any advice for me? Regards, Melissa Fraher ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq This list and all House of Fusion resources hosted by CFHosting.com. The place for dependable ColdFusion Hosting. Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
moving CFIDE folder
I guess that was it. I thought I had done that before, but I tried it again just now and it seems to work. Thank you. ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Your ad could be here. Monies from ads go to support these lists and provide more resources for the community. http://www.fusionauthority.com/ads.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
MS Word Object
Hey guys. Playing around here, and trying to count the words in a MS Word document. It is returning a number, but not the amount of words in the doc, as when I open it up using word, and look at the count there, it is a few off from when I use the object. Maybe I am going it wrong. I created a small document. I open it in the object and do the count (which I think I am going it right), and the total count is returned as 18. I open the document in Word, do a count, says I have 14 words. Very odd. I am using Word 2000 and CFMX. Also, anyone know how I can get the total pages, document name, paragraphs, etc... that word gives you on the word count box? not seeing much information on it online, and stumbled up on the count by mistake, so it may be not what I am trying to do. I just need a realistic count. The document does have 14 words, as I counted it myself, not sure why when using the code below it says I have 18 words. Here is the code. Thanks for any help! CFTRY CFOBJECT ACTION=CONNECT CLASS=Word.Application NAME=objWord TYPE=COM CFCATCH CFOBJECT ACTION=CREATE CLASS=Word.Application NAME=objWord TYPE=COM /CFCATCH /CFTRY CFSCRIPT OpenDoc = objWord.Documents.Open(c:\blah.doc); Count = opendoc.words.count(); OpenDoc.Close(); objWord.Quit(); objWord = Nothing; /CFSCRIPT CFOUTPUT COUNT: #count# /CFOUTPUT Thanks! Robert Bailey Famous for nothing ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Your ad could be here. Monies from ads go to support these lists and provide more resources for the community. http://www.fusionauthority.com/ads.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
Includes within cfmail
Is it acceptable to make include calls from within a cfmail tag? Here's a code snippet... cftry cfmail to=#form.email# from=#form.my_email# subject=#form.subject# cc=#form.cc_email# timeout=1000 type=HTML cfinclude template=email_header.cfm cfinclude template=#bodyInclude# cfinclude template=email_footer.cfm cfmailparam name=Reply-To value=#form.my_email# /cfmail cfcatch type=Any span class=error The email was not sent properly, please try again.br a href=javascript:document.history.back();Go Back/abr cfoutput#cfcatch.detail#/cfoutputBr /span cfmodule template=email_template_popup.cfm cfabort /cfcatch /cftry ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Structure your ColdFusion code with Fusebox. Get the official book at http://www.fusionauthority.com/bkinfo.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
RE: MS Word Object
Try prototyping how to do it in the vba editor (alt-F11) in word, that's how I always do stuff in word, then you get intellisense and help etc. Then when you have it done, port it to cfscript and then try running it HTH -Original Message- From: Robert Bailey [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 18:49 To: CF-Talk Subject: MS Word Object Hey guys. Playing around here, and trying to count the words in a MS Word document. It is returning a number, but not the amount of words in the doc, as when I open it up using word, and look at the count there, it is a few off from when I use the object. Maybe I am going it wrong. I created a small document. I open it in the object and do the count (which I think I am going it right), and the total count is returned as 18. I open the document in Word, do a count, says I have 14 words. Very odd. I am using Word 2000 and CFMX. Also, anyone know how I can get the total pages, document name, paragraphs, etc... that word gives you on the word count box? not seeing much information on it online, and stumbled up on the count by mistake, so it may be not what I am trying to do. I just need a realistic count. The document does have 14 words, as I counted it myself, not sure why when using the code below it says I have 18 words. Here is the code. Thanks for any help! CFTRY CFOBJECT ACTION=CONNECT CLASS=Word.Application NAME=objWord TYPE=COM CFCATCH CFOBJECT ACTION=CREATE CLASS=Word.Application NAME=objWord TYPE=COM /CFCATCH /CFTRY CFSCRIPT OpenDoc = objWord.Documents.Open(c:\blah.doc); Count = opendoc.words.count(); OpenDoc.Close(); objWord.Quit(); objWord = Nothing; /CFSCRIPT CFOUTPUT COUNT: #count# /CFOUTPUT Thanks! Robert Bailey Famous for nothing ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Structure your ColdFusion code with Fusebox. Get the official book at http://www.fusionauthority.com/bkinfo.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
RE: My First CF Site (Critique Request)
Also, the select box for navigating... Consider switching it to some DHTML navigation or something... There's a tonne of info in there that you could really explore. I agree... The menu at the top would work much better... Usually good is a small menu at the base with the same links repeated in plain html for handy navigation on larger articles and the like. I also agree. Back button is redundant. Home can be part of your menu. -Original Message- From: Jim Davis [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 9:42 AM To: CF-Talk Subject: RE: My First CF Site (Critique Request) -Original Message- From: Scott Wilhelm [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 11:59 AM To: CF-Talk Subject: My First CF Site (Critique Request) Sorry if this is a bit OT, but I was hoping to get some feedback on my first CF site: http://makeover.sllboces.org For what they're worth: 1) The body and link text is REALLY, REALLY small. Too small to read comfortably. Also you've set your font sizes up in a such a way that the browser contols for resizing the text do NOT work. This is most likely because you used pixel sizes in the style sheet. Consider either using relative sizes in the sheet or making mutliple versions of the style sheet available for use by people that need larger text. 3) I would really consider moving your menu to the top of the page. It's nice and experimental and all, but is your audience really experimental? If (as I think it is) your audience may NOT be advanced computer users make it as easy for them as possible and adopt a plain vanilla structure: menu at the top, logo in the upper right, etc. 4) At least on my screens (LCDs) the text of the Of Interest links is illegible when being moused-over (the green is too overpowering). 5) The logo is just gi-freakin'-normous - but it's very simple. I would consider shrinking it down personally. The image of the interested guy is nice - I would probably push something like that larger before the logo. 6) If you shrunk the logo and moved things around you might then consider taking the Quick Links out of a single select box and using multiple boxes (one per group). This would allow people to eliminate a lot of the scrolling needed in that box (right now there are 10 screens of links within that select box). Also the text for that select is also REALLY, REALLY small. Also you might link to a single, plain HTML page with all of those links for those that like to see all their options in front of them. I also wouldn't repeat the quick links in two different places as you have. For the inner pages: 1) I would drop your back link. It's cute, but completely redundant and doesn't offer anything - again I would REALLY consider moving the menu to the TOP of the page. That's about it off the top of my head. Damn I'm a picky bastard. Jim Davis ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq This list and all House of Fusion resources hosted by CFHosting.com. The place for dependable ColdFusion Hosting. Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
Re: Includes within cfmail
-- Original Message -- From: Dowdell, Jason G [EMAIL PROTECTED] Is it acceptable to make include calls from within a cfmail tag? I've never had a problem doing so. I typically cfinculde my cancellation policy text that way. Of course, if there is any code that shouldn't be between cfmail tags in those files, you'll have problems. Scott Scott Brady http://www.scottbrady.net/ ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Get the mailserver that powers this list at http://www.coolfusion.com Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
RE: Re-ordering table records
Peter: I built a system quite a few years back that let you reorder records. The front end was a select list showing all of the records and 2 buttons, up and down. When you were finished reordering the records, you'd push the submit button which would build a list of the elementIDs in the new order. The backend simply looped over the list and entered the new order number into the DB. Email me offlist if you want the code (front and back). -- Mosh Teitelbaum evoch, LLC Tel: (301) 942-5378 Fax: (301) 933-3651 Email: [EMAIL PROTECTED] WWW: http://www.evoch.com/ -Original Message- From: Tilbrook, Peter [mailto:[EMAIL PROTECTED] Sent: Monday, March 10, 2003 6:43 PM To: CF-Talk Subject: Re-ordering table records What would be the best (web based) way to provide a sorting feature of records in a database table (eg: move up/down). Cheers! == Peter Tilbrook Internet Applications Developer Australian Building Codes Board GPO Box 9839 CANBERRA ACT 2601 AUSTRALIA WWW: http://www.abcb.gov.au/ E-Mail: [EMAIL PROTECTED] Telephone: +61 (02) 6213 6731 Mobile: 0439 401 823 Facsimile: +61 (02) 6213 7287 ** The information contained in this e-mail, and any attachments to it, is intended for the use of addressee and is confidential. If you are not the intended recipient, you must not use, disclose, read, forward, copy or retain any of the information. If you have received this e-mail in error, please delete it and notify the sender by return e-mail or telephone. The Commonwealth does not warrant that any attachments are free from viruses or any other defects. You assume all liability for any loss, damage, or other consequences which may arise from opening or using the attachments. ** ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Signup for the Fusion Authority news alert and keep up with the latest news in ColdFusion and related topics. http://www.fusionauthority.com/signup.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
RE: cfgrid issues
SmartSurf? They have some pretty cool stuff. I am not overjoyed with email responses, but I have found their tags to be very functional. Dan -Original Message- From: Thomas Chiverton [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 11:19 AM To: CF-Talk Subject: Re: cfgrid issues On Tuesday 11 Mar 2003 14:52 pm, Jack Ince wrote: These people have a product that is supposed to be good. http://216.74.28.185/products/cfgrid/index.cfm I hope it's better than the pricing calculator and examples on their front page. The drop down in the calcualtor wont let me click it. The examples window pops up a message about being IE only. Useless. I'd throw the URL away on principle. -- Tom C Land of the free, home of the brave... you have to be brave to live there and enjoy the freedoms ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Get the mailserver that powers this list at http://www.coolfusion.com Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
RE: Includes within cfmail
Sure, it's acceptable. Just watch out for extraneous whitespace. -- Mosh Teitelbaum evoch, LLC Tel: (301) 942-5378 Fax: (301) 933-3651 Email: [EMAIL PROTECTED] WWW: http://www.evoch.com/ -Original Message- From: Dowdell, Jason G [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 2:15 PM To: CF-Talk Subject: Includes within cfmail Is it acceptable to make include calls from within a cfmail tag? Here's a code snippet... cftry cfmail to=#form.email# from=#form.my_email# subject=#form.subject# cc=#form.cc_email# timeout=1000 type=HTML cfinclude template=email_header.cfm cfinclude template=#bodyInclude# cfinclude template=email_footer.cfm cfmailparam name=Reply-To value=#form.my_email# /cfmail cfcatch type=Any span class=error The email was not sent properly, please try again.br a href=javascript:document.history.back();Go Back/abr cfoutput#cfcatch.detail#/cfoutputBr /span cfmodule template=email_template_popup.cfm cfabort /cfcatch /cftry ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Structure your ColdFusion code with Fusebox. Get the official book at http://www.fusionauthority.com/bkinfo.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
RE: MS Word Object
hmmm, very odd. Maybe my install of word is messed up here? So I wrote a quick script in word: Sub Test() Dim DocOpen As Word.Document Set DocOpen = Documents.Open(c:\blah.doc) With DocOpen MsgBox The name of this doc is .Name Which has a count of .Words.Count .Close wdDoNotSaveChanges End With Set DocOpen = Nothing End Sub OK, simple, displays the name of the document and how many words. The document I opened has one word, simply hi Even this script returns is as 2 words! But if I open up blah.doc in MS Word manually and check the count, it says one word, as it should. Also, when I am using the com object, I can not get the .name value, says it is not a method. Know anything about this at all? is it something I should not worry about? Thanks! Robert Bailey Famous for nothing -Original Message- From: Mike Townend [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 2:23 PM To: CF-Talk Subject: RE: MS Word Object Try prototyping how to do it in the vba editor (alt-F11) in word, that's how I always do stuff in word, then you get intellisense and help etc. Then when you have it done, port it to cfscript and then try running it HTH -Original Message- From: Robert Bailey [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 18:49 To: CF-Talk Subject: MS Word Object Hey guys. Playing around here, and trying to count the words in a MS Word document. It is returning a number, but not the amount of words in the doc, as when I open it up using word, and look at the count there, it is a few off from when I use the object. Maybe I am going it wrong. I created a small document. I open it in the object and do the count (which I think I am going it right), and the total count is returned as 18. I open the document in Word, do a count, says I have 14 words. Very odd. I am using Word 2000 and CFMX. Also, anyone know how I can get the total pages, document name, paragraphs, etc... that word gives you on the word count box? not seeing much information on it online, and stumbled up on the count by mistake, so it may be not what I am trying to do. I just need a realistic count. The document does have 14 words, as I counted it myself, not sure why when using the code below it says I have 18 words. Here is the code. Thanks for any help! CFTRY CFOBJECT ACTION=CONNECT CLASS=Word.Application NAME=objWord TYPE=COM CFCATCH CFOBJECT ACTION=CREATE CLASS=Word.Application NAME=objWord TYPE=COM /CFCATCH /CFTRY CFSCRIPT OpenDoc = objWord.Documents.Open(c:\blah.doc); Count = opendoc.words.count(); OpenDoc.Close(); objWord.Quit(); objWord = Nothing; /CFSCRIPT CFOUTPUT COUNT: #count# /CFOUTPUT Thanks! Robert Bailey Famous for nothing ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Your ad could be here. Monies from ads go to support these lists and provide more resources for the community. http://www.fusionauthority.com/ads.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
Searching
I'm not familiar at all w/ ColdFusion's searching abilities. I am currently running CF5 on Win2k. I'd like to create a search although my site's partially static mostly dynamic. What's the best way to search? Thanks, Scott Scott Wilhelm Computer Technician/Web Developer http://www.sllboces.org http://www.sllboces.org/ [EMAIL PROTECTED] Canton (Mon/Tue) St. Lawrence-Lewis BOCES PO Box 231, 139 State Street Road Canton, NY 13617 P. 315-386-4504 x 164 F. 315-386-3395 Heuvelton (Wed/Thu/Fri) Heuvelton Central School PO Box 375, 87 Washington Street Heuvelton, NY 13654 P. 315-344-2414 x 3651?xml:namespace prefix = o ns = urn:schemas-microsoft-com:office:office / ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Signup for the Fusion Authority news alert and keep up with the latest news in ColdFusion and related topics. http://www.fusionauthority.com/signup.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
input radio buttons
HI, I have the following radio buttons: input type=radio name=Yesnbsp;Yesbr input type=radio name=Nonbsp;No Currently I can click on both the yes and no and they both get selected. I don't want that to happen. The user should only be able to select one. How can I do this? I also have another list of radio buttons with 5 items but only want to allow the user to select one and NOT multiples. --- Colonel Nathan R. Jessop Commanding Officer Marine Ground Forces Guatanamo Bay, Cuba --- ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq This list and all House of Fusion resources hosted by CFHosting.com. The place for dependable ColdFusion Hosting. Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
Another Verity Search Problem
I'm not sure either. Can anyone tell me if there should be files located in the CFUSION/VERITY/FILTERS folder? If so, what are the names? I don't have any. ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Signup for the Fusion Authority news alert and keep up with the latest news in ColdFusion and related topics. http://www.fusionauthority.com/signup.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
RE: MS Word Object
OK, I have tested this code on 3 machines, all get the wrong count. Anyone know what is going on? Thanks! Robert Bailey Famous for nothing -Original Message- From: Robert Bailey [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 2:43 PM To: CF-Talk Subject: RE: MS Word Object hmmm, very odd. Maybe my install of word is messed up here? So I wrote a quick script in word: Sub Test() Dim DocOpen As Word.Document Set DocOpen = Documents.Open(c:\blah.doc) With DocOpen MsgBox The name of this doc is .Name Which has a count of .Words.Count .Close wdDoNotSaveChanges End With Set DocOpen = Nothing End Sub OK, simple, displays the name of the document and how many words. The document I opened has one word, simply hi Even this script returns is as 2 words! But if I open up blah.doc in MS Word manually and check the count, it says one word, as it should. Also, when I am using the com object, I can not get the .name value, says it is not a method. Know anything about this at all? is it something I should not worry about? Thanks! Robert Bailey Famous for nothing -Original Message- From: Mike Townend [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 2:23 PM To: CF-Talk Subject: RE: MS Word Object Try prototyping how to do it in the vba editor (alt-F11) in word, that's how I always do stuff in word, then you get intellisense and help etc. Then when you have it done, port it to cfscript and then try running it HTH -Original Message- From: Robert Bailey [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 18:49 To: CF-Talk Subject: MS Word Object Hey guys. Playing around here, and trying to count the words in a MS Word document. It is returning a number, but not the amount of words in the doc, as when I open it up using word, and look at the count there, it is a few off from when I use the object. Maybe I am going it wrong. I created a small document. I open it in the object and do the count (which I think I am going it right), and the total count is returned as 18. I open the document in Word, do a count, says I have 14 words. Very odd. I am using Word 2000 and CFMX. Also, anyone know how I can get the total pages, document name, paragraphs, etc... that word gives you on the word count box? not seeing much information on it online, and stumbled up on the count by mistake, so it may be not what I am trying to do. I just need a realistic count. The document does have 14 words, as I counted it myself, not sure why when using the code below it says I have 18 words. Here is the code. Thanks for any help! CFTRY CFOBJECT ACTION=CONNECT CLASS=Word.Application NAME=objWord TYPE=COM CFCATCH CFOBJECT ACTION=CREATE CLASS=Word.Application NAME=objWord TYPE=COM /CFCATCH /CFTRY CFSCRIPT OpenDoc = objWord.Documents.Open(c:\blah.doc); Count = opendoc.words.count(); OpenDoc.Close(); objWord.Quit(); objWord = Nothing; /CFSCRIPT CFOUTPUT COUNT: #count# /CFOUTPUT Thanks! Robert Bailey Famous for nothing ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Signup for the Fusion Authority news alert and keep up with the latest news in ColdFusion and related topics. http://www.fusionauthority.com/signup.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
Another Verity Search Problem
I am not sure either. Should anything be in the CFUSION/VERITY/FILTERS folder? ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Structure your ColdFusion code with Fusebox. Get the official book at http://www.fusionauthority.com/bkinfo.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
RE: input radio buttons
http://dir.yahoo.com/Computers_and_Internet/Data_Formats/HTML/ for an 'old-skool' start Doug -Original Message- From: FlashGuy [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 3:23 PM To: CF-Talk Subject: input radio buttons HI, I have the following radio buttons: input type=radio name=Yesnbsp;Yesbr input type=radio name=Nonbsp;No Currently I can click on both the yes and no and they both get selected. I don't want that to happen. The user should only be able to select one. How can I do this? I also have another list of radio buttons with 5 items but only want to allow the user to select one and NOT multiples. --- Colonel Nathan R. Jessop Commanding Officer Marine Ground Forces Guatanamo Bay, Cuba --- ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq This list and all House of Fusion resources hosted by CFHosting.com. The place for dependable ColdFusion Hosting. Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4
RE: input radio buttons
Give them the same name with different values input type=radio name=yourbutton value=yesnbsp;Yesbr input type=radio name=yourbutton value=nonbsp;No -Original Message- From: FlashGuy [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 1:23 PM To: CF-Talk Subject: input radio buttons HI, I have the following radio buttons: input type=radio name=Yesnbsp;Yesbr input type=radio name=Nonbsp;No Currently I can click on both the yes and no and they both get selected. I don't want that to happen. The user should only be able to select one. How can I do this? I also have another list of radio buttons with 5 items but only want to allow the user to select one and NOT multiples. --- Colonel Nathan R. Jessop Commanding Officer Marine Ground Forces Guatanamo Bay, Cuba --- ~| Archives: http://www.houseoffusion.com/cf_lists/index.cfm?forumid=4 Subscription: http://www.houseoffusion.com/cf_lists/index.cfm?method=subscribeforumid=4 FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Get the mailserver that powers this list at http://www.coolfusion.com Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=89.70.4