Re: Strange behaviour on OpenBSD 5.2 and usb disk

[Marcos Laufer]

Kenneth R Westerback wrote:
> On Wed, Dec 19, 2012 at 05:23:55PM -0300, Marcos Laufer wrote:
>   
>> This is a DL360G3 running OpenBSD 5.2 . I can't use a  "WD My Passport" 
>> USB disk, i get input/output error, here is what i got:
>>
>> # dmesg 
>> OpenBSD 5.2 (GENERIC) #0: Fri Dec 14 23:58:18 ART 2012
>> root@:/u/system/src/sys/arch/i386/compile/GENERIC
>> cpu0: Intel(R) Xeon(TM) CPU 3.06GHz ("GenuineIntel" 686-class) 3.07 GHz
>> cpu0: 
>> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
>> real mem  = 3220738048 (3071MB)
>> avail mem = 3157274624 (3011MB)
>> mainbus0 at root
>> bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf, 
>> SMBIOS rev. 2.3 @ 0xec000 (42 entries)
>> bios0: vendor HP version "P31" date 01/28/2004
>> bios0: HP ProLiant DL360 G3
>> acpi0 at bios0: rev 0
>> acpi0: sleep states S0 S4 S5
>> acpi0: tables DSDT FACP APIC SPCR
>> acpi0: wakeup devices
>> acpitimer0 at acpi0: 3579545 Hz, 32 bits
>> acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
>> cpu0 at mainbus0: apid 0 (boot processor)
>> cpu0: apic clock running at 133MHz
>> cpu at mainbus0: not configured
>> cpu at mainbus0: not configured
>> cpu at mainbus0: not configured
>> ioapic0 at mainbus0: apid 2 pa 0xfec0, version 11, 16 pins
>> ioapic1 at mainbus0: apid 3 pa 0xfec01000, version 11, 16 pins
>> ioapic2 at mainbus0: apid 4 pa 0xfec02000, version 11, 16 pins
>> ioapic3 at mainbus0: apid 5 pa 0xfec03000, version 11, 16 pins
>> acpiprt0 at acpi0: bus 0 (PCI0)
>> acpiprt1 at acpi0: bus 1 (PCI1)
>> acpiprt2 at acpi0: bus 4 (PCI2)
>> acpicpu0 at acpi0
>> acpitz0 at acpi0: critical temperature is 31 degC
>> bios0: ROM list: 0xc/0x8000 0xc8000/0x4000 0xee000/0x2000!
>> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
>> pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x33
>> pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x00
>> pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x00
>> pci1 at pchb2 bus 1
>> bge0 at pci1 dev 2 function 0 "Broadcom BCM5703X" rev 0x02, BCM5702/5703 A2 
>> (0x1002): apic 3 int 14, address 00:0f:20:96:8c:de
>> brgphy0 at bge0 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
>> vga1 at pci0 dev 3 function 0 "ATI Rage XL" rev 0x27
>> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
>> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
>> ciss0 at pci0 dev 4 function 0 "Compaq Smart Array 5i/532 rev.2" rev 0x01: 
>> apic 3 int 15
>> ciss0: 1 LD, HW rev 1, FW 2.36/2.36
>> scsibus0 at ciss0: 1 targets
>> sd0 at scsibus0 targ 0 lun 0:  SCSI0 0/direct 
>> fixed
>> sd0: 17359MB, 512 bytes/sector, 35553120 sectors
>> "Compaq iLO" rev 0x01 at pci0 dev 5 function 0 not configured
>> "Compaq iLO" rev 0x01 at pci0 dev 5 function 2 not configured
>> piixpm0 at pci0 dev 15 function 0 "ServerWorks CSB5" rev 0x93: polling
>> iic0 at piixpm0
>> spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM registered ECC PC2100CL2.5
>> spdmem1 at iic0 addr 0x52: 512MB DDR SDRAM registered ECC PC2100CL2.5
>> spdmem2 at iic0 addr 0x54: 1GB DDR SDRAM registered ECC PC2100CL2.5
>> spdmem3 at iic0 addr 0x56: 1GB DDR SDRAM registered ECC PC2100CL2.5
>> pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA
>> atapiscsi0 at pciide0 channel 0 drive 0
>> scsibus1 at atapiscsi0: 2 targets
>> cd0 at scsibus1 targ 0 lun 0:  ATAPI 5/cdrom 
>> removable
>> cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 1
>> ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x05: apic 2 
>> int 10, version 1.0, legacy support
>> pchb3 at pci0 dev 15 function 3 "ServerWorks CSB5 LPC" rev 0x00
>> pchb4 at pci0 dev 17 function 0 "ServerWorks CIOB-X2 PCIX" rev 0x05
>> pchb5 at pci0 dev 17 function 2 "ServerWorks CIOB-X2 PCIX" rev 0x05
>> pci2 at pchb5 bus 4
>> bge1 at pci2 dev 2 function 0 "Broadcom BCM5703X" rev 0x02, BCM5702/5703 A2 
>> (0x1002): apic 3 int 13, address 00:0f:20:96:8c:e1
>> brgphy1 at bge1 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
>> usb0 at ohci0: USB revision 1.0
>> uhub0 at usb0 "ServerWorks OHCI root hub" rev 1.00/1.00 addr 1
>> isa0 at mainbus0
>> isadma0 at isa0
>> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
>&g

Strange behaviour on OpenBSD 5.2 and usb disk

[Marcos Laufer]

This is a DL360G3 running OpenBSD 5.2 . I can't use a  "WD My Passport" 
USB disk, i get input/output error, here is what i got:

# dmesg 
OpenBSD 5.2 (GENERIC) #0: Fri Dec 14 23:58:18 ART 2012
root@:/u/system/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(TM) CPU 3.06GHz ("GenuineIntel" 686-class) 3.07 GHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem  = 3220738048 (3071MB)
avail mem = 3157274624 (3011MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf, SMBIOS 
rev. 2.3 @ 0xec000 (42 entries)
bios0: vendor HP version "P31" date 01/28/2004
bios0: HP ProLiant DL360 G3
acpi0 at bios0: rev 0
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC SPCR
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec0, version 11, 16 pins
ioapic1 at mainbus0: apid 3 pa 0xfec01000, version 11, 16 pins
ioapic2 at mainbus0: apid 4 pa 0xfec02000, version 11, 16 pins
ioapic3 at mainbus0: apid 5 pa 0xfec03000, version 11, 16 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PCI1)
acpiprt2 at acpi0: bus 4 (PCI2)
acpicpu0 at acpi0
acpitz0 at acpi0: critical temperature is 31 degC
bios0: ROM list: 0xc/0x8000 0xc8000/0x4000 0xee000/0x2000!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x33
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x00
pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x00
pci1 at pchb2 bus 1
bge0 at pci1 dev 2 function 0 "Broadcom BCM5703X" rev 0x02, BCM5702/5703 A2 
(0x1002): apic 3 int 14, address 00:0f:20:96:8c:de
brgphy0 at bge0 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
vga1 at pci0 dev 3 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ciss0 at pci0 dev 4 function 0 "Compaq Smart Array 5i/532 rev.2" rev 0x01: apic 
3 int 15
ciss0: 1 LD, HW rev 1, FW 2.36/2.36
scsibus0 at ciss0: 1 targets
sd0 at scsibus0 targ 0 lun 0:  SCSI0 0/direct 
fixed
sd0: 17359MB, 512 bytes/sector, 35553120 sectors
"Compaq iLO" rev 0x01 at pci0 dev 5 function 0 not configured
"Compaq iLO" rev 0x01 at pci0 dev 5 function 2 not configured
piixpm0 at pci0 dev 15 function 0 "ServerWorks CSB5" rev 0x93: polling
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM registered ECC PC2100CL2.5
spdmem1 at iic0 addr 0x52: 512MB DDR SDRAM registered ECC PC2100CL2.5
spdmem2 at iic0 addr 0x54: 1GB DDR SDRAM registered ECC PC2100CL2.5
spdmem3 at iic0 addr 0x56: 1GB DDR SDRAM registered ECC PC2100CL2.5
pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0:  ATAPI 5/cdrom 
removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 1
ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x05: apic 2 
int 10, version 1.0, legacy support
pchb3 at pci0 dev 15 function 3 "ServerWorks CSB5 LPC" rev 0x00
pchb4 at pci0 dev 17 function 0 "ServerWorks CIOB-X2 PCIX" rev 0x05
pchb5 at pci0 dev 17 function 2 "ServerWorks CIOB-X2 PCIX" rev 0x05
pci2 at pchb5 bus 4
bge1 at pci2 dev 2 function 0 "Broadcom BCM5703X" rev 0x02, BCM5702/5703 A2 
(0x1002): apic 3 int 13, address 00:0f:20:96:8c:e1
brgphy1 at bge1 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "ServerWorks OHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 4 configuration 1 interface 0 "Western Digital My Passport 
0748" rev 2.10/10.15 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0:  SCSI4 0/direct fixed
sd1: 953837MB, 512 bytes/sector, 1953458176 sectors
ses0 at scsibus2 targ 1 lun 1:  SCSI4 13/enclosure 
services fixed
ses0: unable to read enclosure configuration
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (dbca6b23415fa5d6.a) swap on sd0b dump on sd0b


# 
# disklabel sd1
# /dev/rsd1c:
type:

Re: OpenBSD hangs when i unplug USB disk

[Marcos Laufer]

Peter Hessler wrote:

On 2012 Nov 20 (Tue) at 12:45:09 -0300 (-0300), Marcos Laufer wrote:
:Ok , i've just tried it on a OpenBSD 5.1 and unplugging the USB works
:just fine, no crash, no freeze.
:
:The weird thing and i don't understand why, is that you guys had good
:results with old OpenBSD versions and i didn't.
:

No, nobody bothered with older versions.  We run -current, or 5.1 at the
latest.

  


I'm sorry, but some people bothered, even asked me to send info because 
this worked with old versions of the OS to them and not to me. So i 
guess it has something to do with the firmware on the disk, i don't 
really know. But if it works on 5.1 then that's enough for me.

Re: OpenBSD hangs when i unplug USB disk

[Marcos Laufer]

Marcos Ariel Laufer wrote:

On 11/18/2012 12:35 PM, Paul de Weerd wrote:

On Thu, Nov 15, 2012 at 01:04:02PM -0300, Marcos Laufer wrote:
| >I did this quite often a couple of weeks ago.  Haven't tried for a
| >while (no need) and have upgraded to newer snaps a bunch of times
| >since.  Tonight I'll confirm I can unplug safely on the latest snap.
|
| Thank you Paul, i look forward for the results of your testing 
tonight.


Apologies for the late response; my Thursday plans got changed at the
last minute.

However, I've verified that unplugging works fine with the latest
snapshot.  So no regressions from my POV.

Paul 'WEiRD' de Weerd

Damn, why mine isn't working fine then? Do you have i386 or AMD? I'll 
try latest 5.1 and 5.2 tomorrow and see what happens.





Ok , i've just tried it on a OpenBSD 5.1 and unplugging the USB works 
just fine, no crash, no freeze.


The weird thing and i don't understand why, is that you guys had good 
results with old OpenBSD versions and i didn't.


Regards,
Marcos

Re: OpenBSD hangs when i unplug USB disk

[Marcos Laufer]

Kenneth R Westerback wrote:
> On Thu, Nov 15, 2012 at 12:48:03PM -0300, Marcos Laufer wrote:
>   
>> Kenneth R Westerback wrote:
>> 
>>> On Wed, Nov 14, 2012 at 04:22:20PM -0300, Marcos Laufer wrote:
>>>   
>>>> Hello, i'd like to inform a problem when dettaching an external 1TB
>>>> USB disk drive , the system just freezes, i can't type anything.
>>>> Also It stops responding to ping.
>>>> If i don't unplug it then i can use the disk normally, i can copy
>>>> and delete files with no problem. But as soon as i unplug the USB
>>>> cord, the machine freezes.
>>>> I've tested it on several machines, different OpenBSD versions
>>>> starting from 4.3, i'm not asking for support, i know old OpenBSD
>>>> versions are no longer supported, but this seemed pretty odd, i
>>>> suppose that plugging and unplugging a USB disk should not cause any
>>>> problems on any OS version.
>>>>
>>>> These are the lines on dmesg about this disk:
>>>>
>>>>
>>>> Nov 14 16:00:31 hq /bsd: umass0 at uhub0
>>>> Nov 14 16:00:31 hq /bsd:  port 5 configuration 1 interface 0
>>>> "Western Digital My Passport 0748" rev 2.10/10.15 addr 2
>>>> Nov 14 16:00:31 hq /bsd: umass0: using SCSI over Bulk-Only
>>>> Nov 14 16:00:31 hq /bsd: scsibus0 at umass0: 2 targets, initiator 0
>>>> Nov 14 16:00:31 hq /bsd: sd0 at scsibus0 targ 1 lun 0: >>> Passport 0748, 1015> SCSI4 0/direct fixed
>>>> Nov 14 16:00:38 hq /bsd: sd0: 953837MB, 512 bytes/sec, 1953458176 sec total
>>>> Nov 14 16:00:38 hq /bsd: ses0 at scsibus0 targ 1 lun 1: >>> Device, 1015> SCSI4 13/enclosure services fixed
>>>> Nov 14 16:00:38 hq /bsd: ses0: unable to read enclosure configuration
>>>>
>>>> Best regards,
>>>> Marcos
>>>>
>>>> 
>>> As an experiment, try going into boot's config (-c at the boot>) and
>>> "disable ses". Then see if a) the ses device is still present, and b)
>>> if the absence of the ses device(s) alleviate the symptoms.
>>>
>>>  Ken
>>>
>>>
>>>   
>> Hello, i've just tried this. The ses device is not present when i
>> disable it at boot time, but the problem persists, if i unplug the
>> USB cord (no matter if the partition is mounted or not) the OS just
>> freezes. So i guess it is not related to the ses driver.
>>
>> This are the dmesg lines of this experiment:
>>
>> Nov 15 12:32:52 hq /bsd: umass0 at uhub0
>> Nov 15 12:32:52 hq /bsd:  port 5 configuration 1 interface 0
>> "Western Digital My Passport 0748" rev 2.10/10.15 addr 2
>> Nov 15 12:32:52 hq /bsd: umass0: using SCSI over Bulk-Only
>> Nov 15 12:32:52 hq /bsd: scsibus0 at umass0: 2 targets, initiator 0
>> Nov 15 12:32:52 hq /bsd: sd0 at scsibus0 targ 1 lun 0: > Passport 0748, 1015> SCSI4 0/direct fixed
>> Nov 15 12:32:59 hq /bsd: sd0: 953837MB, 512 bytes/sec, 1953458176 sec total
>> Nov 15 12:32:59 hq /bsd: uk0 at scsibus0 targ 1 lun 1: > Device, 1015> SCSI4 13/enclosure services fixed
>>
>> 
>
> Arrg. Need to kill all reference to that second device. Try a kernel with
> this diff. It should prevent probing anything but lun 0.
>
>  Ken
>
> Index: umass_scsi.c
> ===
> RCS file: /cvs/src/sys/dev/usb/umass_scsi.c,v
> retrieving revision 1.38
> diff -u -p -r1.38 umass_scsi.c
> --- umass_scsi.c  17 Jul 2011 22:46:48 -  1.38
> +++ umass_scsi.c  15 Nov 2012 17:17:06 -
> @@ -92,7 +92,7 @@ umass_scsi_attach(struct umass_softc *sc
>  
>   scbus = umass_scsi_setup(sc);
>   scbus->sc_link.adapter_target = UMASS_SCSIID_HOST;
> - scbus->sc_link.luns = sc->maxlun + 1;
> + scbus->sc_link.luns =  1;
>   scbus->sc_link.flags &= ~SDEV_ATAPI;
>   scbus->sc_link.flags |= SDEV_UMASS;
>  
>
>
>   
Ken, i've applied your patch on an old OpenBSD 4.5 i use for testing 
purposes and the problem got solved. Now i can unplug the USB disk and 
no freeze at all. Is it safe to apply it on older and newer OpenBSD 
versions as well?

These are the new dmesg lines:

umass0 at uhub0 port 5 configuration 1 interface 0 "Western Digital My 
Passport 0748" rev 2.10/10.15 addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0:  SCSI4 
0/direct fixed
sd0: 953837MB, 512 bytes/sec, 1953458176 sec total

and after unpluggin the USB cord i get:

sd0 detached
scsibus0 detached
umass0 detached

And the OS does not freeze anymore.

Thank you very much!

Re: OpenBSD hangs when i unplug USB disk

[Marcos Laufer]

Paul de Weerd wrote:

On Thu, Nov 15, 2012 at 04:18:14PM +0100, Otto Moerbeek wrote:
| > I have no problems whatsoever (mounting, umounting, using the disks,
| > etc) with mine:
| 
| Did you also try unplugging it? If that works and since the OP did not

| state the newest version he tried this on, we can probably conclude
| this is already fixed. 


I did this quite often a couple of weeks ago.  Haven't tried for a
while (no need) and have upgraded to newer snaps a bunch of times
since.  Tonight I'll confirm I can unplug safely on the latest snap.

Cheers,

Paul 'WEiRD' de Weerd

  


Thank you Paul, i look forward for the results of your testing tonight.

Best regards,
Marcos

Re: OpenBSD hangs when i unplug USB disk

[Marcos Laufer]

Kevin Chadwick wrote:
> On Thu, 15 Nov 2012 07:45:40 -0300
> Marcos Ariel Laufer  wrote:
>
>   
>> I've been using OpenBSD since 2.6, this never happened to me with any 
>> other USB hard disks. This one in particular i bought it a couple of 
>> days ago.
>> 
>
> I wonder if it freezes other OS or causes problems before even the bios
> boot selection?
>
>
>   

Hello, i've also just tried this right now. It does not freeze Windows XP.
Also, the machine does not freeze when plugging and unplugging the cord 
if done before boot selection. All my machines are i386.

Re: OpenBSD hangs when i unplug USB disk

[Marcos Laufer]

Kenneth R Westerback wrote:
> On Wed, Nov 14, 2012 at 04:22:20PM -0300, Marcos Laufer wrote:
>   
>> Hello, i'd like to inform a problem when dettaching an external 1TB
>> USB disk drive , the system just freezes, i can't type anything.
>> Also It stops responding to ping.
>> If i don't unplug it then i can use the disk normally, i can copy
>> and delete files with no problem. But as soon as i unplug the USB
>> cord, the machine freezes.
>> I've tested it on several machines, different OpenBSD versions
>> starting from 4.3, i'm not asking for support, i know old OpenBSD
>> versions are no longer supported, but this seemed pretty odd, i
>> suppose that plugging and unplugging a USB disk should not cause any
>> problems on any OS version.
>>
>> These are the lines on dmesg about this disk:
>>
>>
>> Nov 14 16:00:31 hq /bsd: umass0 at uhub0
>> Nov 14 16:00:31 hq /bsd:  port 5 configuration 1 interface 0
>> "Western Digital My Passport 0748" rev 2.10/10.15 addr 2
>> Nov 14 16:00:31 hq /bsd: umass0: using SCSI over Bulk-Only
>> Nov 14 16:00:31 hq /bsd: scsibus0 at umass0: 2 targets, initiator 0
>> Nov 14 16:00:31 hq /bsd: sd0 at scsibus0 targ 1 lun 0: > Passport 0748, 1015> SCSI4 0/direct fixed
>> Nov 14 16:00:38 hq /bsd: sd0: 953837MB, 512 bytes/sec, 1953458176 sec total
>> Nov 14 16:00:38 hq /bsd: ses0 at scsibus0 targ 1 lun 1: > Device, 1015> SCSI4 13/enclosure services fixed
>> Nov 14 16:00:38 hq /bsd: ses0: unable to read enclosure configuration
>>
>> Best regards,
>> Marcos
>>
>> 
>
> As an experiment, try going into boot's config (-c at the boot>) and
> "disable ses". Then see if a) the ses device is still present, and b)
> if the absence of the ses device(s) alleviate the symptoms.
>
>  Ken
>
>
>   

Hello, i've just tried this. The ses device is not present when i 
disable it at boot time, but the problem persists, if i unplug the USB 
cord (no matter if the partition is mounted or not) the OS just freezes. 
So i guess it is not related to the ses driver.

This are the dmesg lines of this experiment:

Nov 15 12:32:52 hq /bsd: umass0 at uhub0
Nov 15 12:32:52 hq /bsd:  port 5 configuration 1 interface 0 "Western 
Digital My Passport 0748" rev 2.10/10.15 addr 2
Nov 15 12:32:52 hq /bsd: umass0: using SCSI over Bulk-Only
Nov 15 12:32:52 hq /bsd: scsibus0 at umass0: 2 targets, initiator 0
Nov 15 12:32:52 hq /bsd: sd0 at scsibus0 targ 1 lun 0:  SCSI4 0/direct fixed
Nov 15 12:32:59 hq /bsd: sd0: 953837MB, 512 bytes/sec, 1953458176 sec total
Nov 15 12:32:59 hq /bsd: uk0 at scsibus0 targ 1 lun 1:  SCSI4 13/enclosure services fixed

OpenBSD hangs when i unplug USB disk

[Marcos Laufer]

Hello, i'd like to inform a problem when dettaching an external 1TB USB 
disk drive , the system just freezes, i can't type anything. Also It 
stops responding to ping.
If i don't unplug it then i can use the disk normally, i can copy and 
delete files with no problem. But as soon as i unplug the USB cord, the 
machine freezes.
I've tested it on several machines, different OpenBSD versions starting 
from 4.3, i'm not asking for support, i know old OpenBSD versions are no 
longer supported, but this seemed pretty odd, i suppose that plugging 
and unplugging a USB disk should not cause any problems on any OS version.


These are the lines on dmesg about this disk:


Nov 14 16:00:31 hq /bsd: umass0 at uhub0
Nov 14 16:00:31 hq /bsd:  port 5 configuration 1 interface 0 "Western 
Digital My Passport 0748" rev 2.10/10.15 addr 2

Nov 14 16:00:31 hq /bsd: umass0: using SCSI over Bulk-Only
Nov 14 16:00:31 hq /bsd: scsibus0 at umass0: 2 targets, initiator 0
Nov 14 16:00:31 hq /bsd: sd0 at scsibus0 targ 1 lun 0: 0748, 1015> SCSI4 0/direct fixed

Nov 14 16:00:38 hq /bsd: sd0: 953837MB, 512 bytes/sec, 1953458176 sec total
Nov 14 16:00:38 hq /bsd: ses0 at scsibus0 targ 1 lun 1: 1015> SCSI4 13/enclosure services fixed

Nov 14 16:00:38 hq /bsd: ses0: unable to read enclosure configuration

Best regards,
Marcos

update2: update: OpenBSD 4.8 weird time or cron problems

[Marcos Laufer]

oh, i am still seeing this on message. btw , i use postfix and i copied 
pwd.db to it's /etc folder


Jul 19 15:43:16 srv last message repeated 237 times
Jul 19 15:53:13 srv last message repeated 288 times
Jul 19 15:59:58 srv last message repeated 222 times
Jul 19 13:00:01 srv syslogd: restart
Jul 19 16:00:14 srv sendmail: /etc/pwd.db: No such file or directory
Jul 19 16:00:50 srv last message repeated 15 times
Jul 19 16:02:51 srv last message repeated 62 times
Jul 19 16:05:05 srv last message repeated 57 times


Marcos Laufer wrote:
I noticed that this was sent by email by cron when attempted to 
execute the process:


 Your Terminal type is unknown!

 Enter a terminal type: [vt100]

Why? i don't know. I added TERM=220 into root's crontab and it worked. 
The thing is that it never needed it .. why now it does?


Regards,



Marcos Laufer wrote:

Hello list, i am having strange issues with openbsd 4.8 and cron .

This is a OpenBSD 4.8 with it's kernel modified to have pci.c rev 
1.72 , in order to make it run on a IBM x336 server.
Everything was working perfect. Until i added today a new user. Then 
i used vipw to change it's group.
After that i noticed that my hourly script configured at cron was not 
being executed. When i looked the messages log i saw this:


Jul 19 02:00:01 srv syslogd: restart
Jul 19 04:00:01 srv syslogd: restart
Jul 19 06:00:01 srv syslogd: restart
Jul 19 08:00:01 srv syslogd: restart
Jul 19 10:00:01 srv syslogd: restart
Jul 19 13:51:44 srv sendmail: /etc/pwd.db: No such file or directory
Jul 19 13:52:25 srv last message repeated 14 times
Jul 19 13:54:29 srv last message repeated 48 times
Jul 19 14:00:01 srv last message repeated 159 times
Jul 19 11:00:01 srv syslogd: restart
Jul 19 14:00:10 srv sendmail: /etc/pwd.db: No such file or directory
Jul 19 14:00:40 srv last message repeated 20 times
Jul 19 14:02:39 srv last message repeated 54 times
Jul 19 14:12:29 srv last message repeated 263 times
Jul 19 14:22:37 srv last message repeated 238 times
Jul 19 14:32:41 srv last message repeated 298 times
Jul 19 14:42:40 srv last message repeated 250 times
Jul 19 14:52:40 srv last message repeated 216 times
Jul 19 14:59:58 srv last message repeated 129 times
Jul 19 12:00:01 srv syslogd: restart
Jul 19 15:00:08 srv sendmail: /etc/pwd.db: No such file or directory
Jul 19 15:00:39 srv last message repeated 13 times
Jul 19 15:02:29 srv last message repeated 46 times
Jul 19 15:12:45 srv last message repeated 200 times
Jul 19 15:20:20 srv last message repeated 164 times

Notice how time jumps after 10:00am . Notice after 14:00 that when 
syslog restarts it shows 11:00 , the right time. .


I added the pwd.db and localtime into postfix's etc. I also started 
ntpd to set time . No difference with cron, it does not run it's 
hourly process anymore


Date looks fine when i look at it:
# date
Tue Jul 19 12:29:03 ART 2011

But cron does not execute it's processes anymore. Any help will be 
appreciated!



Here is dmesg:
OpenBSD 4.8-stable (GENERIC.MP) #1: Fri Jan 21 16:23:35 ART 2011
   root@srv:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(TM) CPU 3.20GHz ("GenuineIntel" 686-class) 3.21 GHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,S 


SE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR
real mem  = 2146832384 (2047MB)
avail mem = 2101727232 (2004MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/30/05, BIOS32 rev. 0 @ 
0xfd6f1, SMBIOS rev. 2.3 @ 0xf5eea (52 entries)

bios0: vendor IBM version "-[APE130AUS-1.12]-" date 11/30/2005
bios0: IBM eserver xSeries 336 -[883725U]-
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC MCFG
acpi0: wakeup devices PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 200MHz
cpu1 at mainbus0: apid 6 (application processor)
cpu1: Intel(R) Xeon(TM) CPU 3.20GHz ("GenuineIntel" 686-class) 3.21 GHz
cpu1: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,S 


SE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Xeon(TM) CPU 3.20GHz ("GenuineIntel" 686-class) 3.21 GHz
cpu2: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,S 


SE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR
cpu3 at mainbus0: apid 7 (application processor)
cpu3: Intel(R) Xeon(TM) CPU 3.20GHz ("GenuineIntel" 686-class) 3.21 GHz
cpu3: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,S 


SE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR
ioapic0 at mainbus0: apid 14 pa 0xfec0, version 20, 24 pins
ioapic1 at mainbus0: apid 13 pa 0xfec82000, version 20, 24 pin

update: OpenBSD 4.8 weird time or cron problems

[Marcos Laufer]

I noticed that this was sent by email by cron when attempted to execute 
the process:


 Your Terminal type is unknown!

 Enter a terminal type: [vt100]

Why? i don't know. I added TERM=220 into root's crontab and it worked. 
The thing is that it never needed it .. why now it does?


Regards,



Marcos Laufer wrote:

Hello list, i am having strange issues with openbsd 4.8 and cron .

This is a OpenBSD 4.8 with it's kernel modified to have pci.c rev 1.72 
, in order to make it run on a IBM x336 server.
Everything was working perfect. Until i added today a new user. Then i 
used vipw to change it's group.
After that i noticed that my hourly script configured at cron was not 
being executed. When i looked the messages log i saw this:


Jul 19 02:00:01 srv syslogd: restart
Jul 19 04:00:01 srv syslogd: restart
Jul 19 06:00:01 srv syslogd: restart
Jul 19 08:00:01 srv syslogd: restart
Jul 19 10:00:01 srv syslogd: restart
Jul 19 13:51:44 srv sendmail: /etc/pwd.db: No such file or directory
Jul 19 13:52:25 srv last message repeated 14 times
Jul 19 13:54:29 srv last message repeated 48 times
Jul 19 14:00:01 srv last message repeated 159 times
Jul 19 11:00:01 srv syslogd: restart
Jul 19 14:00:10 srv sendmail: /etc/pwd.db: No such file or directory
Jul 19 14:00:40 srv last message repeated 20 times
Jul 19 14:02:39 srv last message repeated 54 times
Jul 19 14:12:29 srv last message repeated 263 times
Jul 19 14:22:37 srv last message repeated 238 times
Jul 19 14:32:41 srv last message repeated 298 times
Jul 19 14:42:40 srv last message repeated 250 times
Jul 19 14:52:40 srv last message repeated 216 times
Jul 19 14:59:58 srv last message repeated 129 times
Jul 19 12:00:01 srv syslogd: restart
Jul 19 15:00:08 srv sendmail: /etc/pwd.db: No such file or directory
Jul 19 15:00:39 srv last message repeated 13 times
Jul 19 15:02:29 srv last message repeated 46 times
Jul 19 15:12:45 srv last message repeated 200 times
Jul 19 15:20:20 srv last message repeated 164 times

Notice how time jumps after 10:00am . Notice after 14:00 that when 
syslog restarts it shows 11:00 , the right time. .


I added the pwd.db and localtime into postfix's etc. I also started 
ntpd to set time . No difference with cron, it does not run it's 
hourly process anymore


Date looks fine when i look at it:
# date
Tue Jul 19 12:29:03 ART 2011

But cron does not execute it's processes anymore. Any help will be 
appreciated!



Here is dmesg:
OpenBSD 4.8-stable (GENERIC.MP) #1: Fri Jan 21 16:23:35 ART 2011
   root@srv:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(TM) CPU 3.20GHz ("GenuineIntel" 686-class) 3.21 GHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,S 


SE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR
real mem  = 2146832384 (2047MB)
avail mem = 2101727232 (2004MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/30/05, BIOS32 rev. 0 @ 
0xfd6f1, SMBIOS rev. 2.3 @ 0xf5eea (52 entries)

bios0: vendor IBM version "-[APE130AUS-1.12]-" date 11/30/2005
bios0: IBM eserver xSeries 336 -[883725U]-
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC MCFG
acpi0: wakeup devices PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 200MHz
cpu1 at mainbus0: apid 6 (application processor)
cpu1: Intel(R) Xeon(TM) CPU 3.20GHz ("GenuineIntel" 686-class) 3.21 GHz
cpu1: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,S 


SE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Xeon(TM) CPU 3.20GHz ("GenuineIntel" 686-class) 3.21 GHz
cpu2: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,S 


SE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR
cpu3 at mainbus0: apid 7 (application processor)
cpu3: Intel(R) Xeon(TM) CPU 3.20GHz ("GenuineIntel" 686-class) 3.21 GHz
cpu3: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,S 


SE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR
ioapic0 at mainbus0: apid 14 pa 0xfec0, version 20, 24 pins
ioapic1 at mainbus0: apid 13 pa 0xfec82000, version 20, 24 pins
ioapic2 at mainbus0: apid 12 pa 0xfec82400, version 20, 24 pins
acpiprt0 at acpi0: bus 4 (PCI2)
acpiprt1 at acpi0: bus 5 (PCI3)
acpiprt2 at acpi0: bus 1 (PCIS)
acpiprt3 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpicpu2 at acpi0
acpicpu3 at acpi0
bios0: ROM list: 0xc/0xb000 0xcb000/0x1600 0xcc600/0x4000
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
mem address conflict 0xff00/0x1000
pchb0 at pci0 dev 0 function 0 "Intel E7520 Host" rev 0x0c
"Intel E7520 Error Repo

OpenBSD 4.8 weird time or cron problems

[Marcos Laufer]

Hello list, i am having strange issues with openbsd 4.8 and cron .

This is a OpenBSD 4.8 with it's kernel modified to have pci.c rev 1.72 , 
in order to make it run on a IBM x336 server.
Everything was working perfect. Until i added today a new user. Then i 
used vipw to change it's group.
After that i noticed that my hourly script configured at cron was not 
being executed. When i looked the messages log i saw this:


Jul 19 02:00:01 srv syslogd: restart
Jul 19 04:00:01 srv syslogd: restart
Jul 19 06:00:01 srv syslogd: restart
Jul 19 08:00:01 srv syslogd: restart
Jul 19 10:00:01 srv syslogd: restart
Jul 19 13:51:44 srv sendmail: /etc/pwd.db: No such file or directory
Jul 19 13:52:25 srv last message repeated 14 times
Jul 19 13:54:29 srv last message repeated 48 times
Jul 19 14:00:01 srv last message repeated 159 times
Jul 19 11:00:01 srv syslogd: restart
Jul 19 14:00:10 srv sendmail: /etc/pwd.db: No such file or directory
Jul 19 14:00:40 srv last message repeated 20 times
Jul 19 14:02:39 srv last message repeated 54 times
Jul 19 14:12:29 srv last message repeated 263 times
Jul 19 14:22:37 srv last message repeated 238 times
Jul 19 14:32:41 srv last message repeated 298 times
Jul 19 14:42:40 srv last message repeated 250 times
Jul 19 14:52:40 srv last message repeated 216 times
Jul 19 14:59:58 srv last message repeated 129 times
Jul 19 12:00:01 srv syslogd: restart
Jul 19 15:00:08 srv sendmail: /etc/pwd.db: No such file or directory
Jul 19 15:00:39 srv last message repeated 13 times
Jul 19 15:02:29 srv last message repeated 46 times
Jul 19 15:12:45 srv last message repeated 200 times
Jul 19 15:20:20 srv last message repeated 164 times

Notice how time jumps after 10:00am . Notice after 14:00 that when 
syslog restarts it shows 11:00 , the right time. .


I added the pwd.db and localtime into postfix's etc. I also started ntpd 
to set time . No difference with cron, it does not run it's hourly 
process anymore


Date looks fine when i look at it:
# date
Tue Jul 19 12:29:03 ART 2011

But cron does not execute it's processes anymore. Any help will be 
appreciated!



Here is dmesg:
OpenBSD 4.8-stable (GENERIC.MP) #1: Fri Jan 21 16:23:35 ART 2011
   root@srv:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(TM) CPU 3.20GHz ("GenuineIntel" 686-class) 3.21 GHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,S

SE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR
real mem  = 2146832384 (2047MB)
avail mem = 2101727232 (2004MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/30/05, BIOS32 rev. 0 @ 0xfd6f1, 
SMBIOS rev. 2.3 @ 0xf5eea (52 entries)

bios0: vendor IBM version "-[APE130AUS-1.12]-" date 11/30/2005
bios0: IBM eserver xSeries 336 -[883725U]-
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC MCFG
acpi0: wakeup devices PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 200MHz
cpu1 at mainbus0: apid 6 (application processor)
cpu1: Intel(R) Xeon(TM) CPU 3.20GHz ("GenuineIntel" 686-class) 3.21 GHz
cpu1: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,S

SE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Xeon(TM) CPU 3.20GHz ("GenuineIntel" 686-class) 3.21 GHz
cpu2: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,S

SE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR
cpu3 at mainbus0: apid 7 (application processor)
cpu3: Intel(R) Xeon(TM) CPU 3.20GHz ("GenuineIntel" 686-class) 3.21 GHz
cpu3: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,S

SE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR
ioapic0 at mainbus0: apid 14 pa 0xfec0, version 20, 24 pins
ioapic1 at mainbus0: apid 13 pa 0xfec82000, version 20, 24 pins
ioapic2 at mainbus0: apid 12 pa 0xfec82400, version 20, 24 pins
acpiprt0 at acpi0: bus 4 (PCI2)
acpiprt1 at acpi0: bus 5 (PCI3)
acpiprt2 at acpi0: bus 1 (PCIS)
acpiprt3 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpicpu2 at acpi0
acpicpu3 at acpi0
bios0: ROM list: 0xc/0xb000 0xcb000/0x1600 0xcc600/0x4000
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
mem address conflict 0xff00/0x1000
pchb0 at pci0 dev 0 function 0 "Intel E7520 Host" rev 0x0c
"Intel E7520 Error Reporting" rev 0x0c at pci0 dev 0 function 1 not 
configured

ppb0 at pci0 dev 2 function 0 "Intel E7520 PCIE" rev 0x0c
pci1 at ppb0 bus 2
ppb1 at pci0 dev 4 function 0 "Intel E7520 PCIE" rev 0x0c
pci2 at ppb1 bus 3
ppb2 at pci2 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci3 at ppb2 bus 4
mpi0 at pci3 dev 1 function 0 "Symbios Logic 53c1030" rev 0x08: apic 13 
int 4 (irq 11)

scsibus0 at mpi0: 16 targets, initiator 7
sd0 at sc

Re: can't intall webalizer on OpenBSD 4.8

[Marcos Laufer]

Thanks Matthew , you are correct.
I also realized i did not install X sets after sending my email,  i am 
installin all X sets, but i guess those libs probably are on xfont48.tgz



Matthew Weigel wrote:

On Thu, 30 Jun 2011 20:50:20 -0300, Marcos Laufer wrote:

Hello list, i can't install webalizer. This is OpenBSD 4.8 stable, (with
pci.c rev 1.72 because this is a X336 IBM server)
Any ideas why?

ul6:/root{194}# pkg_add webalizer
Can't install gd-2.0.35p0 because of libraries
|library fontconfig.7.0 not found
| not found anywhere
|library freetype.17.1 not found
| not found anywhere


Those libraries are probably provided by install sets you didn't 
install...
like xbase48.tgz.  See 
http://www.openbsd.org/faq/faq4.html#FilesNeeded for

more information.

can't intall webalizer on OpenBSD 4.8

[Marcos Laufer]

2264000 sec total
safte0 at scsibus0 targ 8 lun 0:  SCSI2 
3/processor fixed
mpi0: target 0 Sync at 160MHz width 16bit offset 63 QAS 0 DT 1 IU 1
mpi0: target 1 Sync at 160MHz width 16bit offset 63 QAS 0 DT 1 IU 1
ppb3 at pci2 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci4 at ppb3 bus 5
ppb4 at pci0 dev 6 function 0 "Intel E7520 PCIE" rev 0x0c
pci5 at ppb4 bus 6
bge0 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 
(0x4101): apic 14 int 16 (irq 11), address 00:14:5e:32:11:3e
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb5 at pci0 dev 7 function 0 "Intel E7520 PCIE" rev 0x0c
pci6 at ppb5 bus 7
bge1 at pci6 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 
(0x4101): apic 14 int 16 (irq 11), address 00:14:5e:32:11:3f
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
"Intel E7520 Config" rev 0x0c at pci0 dev 8 function 0 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: apic 14 
int 16 (irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: apic 14 
int 19 (irq 3)
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: apic 
14 int 23 (irq 5)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb6 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xc2
pci7 at ppb6 bus 1
vga1 at pci7 dev 1 function 0 "ATI Radeon VE" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: apic 14 int 16 (irq 11)
drm0 at radeondrm0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 2 "Intel 82801EB SATA" rev 0x02: DMA, 
channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0:  ATAPI 
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: 
apic 14 int 17 (irq 7)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM registered ECC PC2-3200CL5
spdmem1 at iic0 addr 0x51: 512MB DDR2 SDRAM registered ECC PC2-3200CL5
spdmem2 at iic0 addr 0x52: 512MB DDR2 SDRAM registered ECC PC2-3200CL5
spdmem3 at iic0 addr 0x53: 512MB DDR2 SDRAM registered ECC PC2-3200CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
softraid0 at root
root on sd0a swap on sd0b dump on sd0b

-- 

Marcos Laufer
* marcos <mailto:mar...@ipversion4.com>@ipversion4.com 
<mailto:mar...@ipversion4.com>
CTO

Ipversion4.com
http://www.ipversion4.com <http://www.ipversion4.com/>
( 0800-444-HOSTING
Rodriguez Peqa 468 1 C

Re: Automatic reboot on kernel panic

[Marcos Laufer]

I am sorry, this confused me, and i didn't quite understand.

Just to be clear:

ddb.panic=0 will boot instead of dropping you into a ddb?

Or is it ddb.panic=1 the option that will make the system boot?


Regards,

David Coppa wrote:
> On Wed, 22 Jun 2011, ter Voorde Informatiesystemen wrote:
>
>   
>> In /etc/sysctl.conf I see the following commented line:
>>
>> #ddb.panic=0
>>
>> and nothing else about ddb.panic is present there. With other words,
>> I guess: 'ddb.panic=0' is the default boot time setting and does not
>> have to be set explicitly.
>>
>> I now suppose: on a kernel panic, this system will not drop into ddb
>> (kind-of waiting for someone to retrieve useful information about
>> the panic) and is most likely to reboot. Is that correct?
>> 
>
> Exactly the opposite:
>
> $ sysctl ddb.panic
> ddb.panic=1
>
> You need to uncomment that line in /etc/sysctl.conf.
>
> Cheers,
> David

Re: IBM xServer 336/346 - OpenBSD 4.9

[Marcos Laufer]

Daniel,

What i did to make my x336 servers work with OpenBSD 4.9 was to replace 
pci.c from the source with pci.c 1.72 .
Is this somehow wrong? Should i apply this patch instead?

Regards,
Marcos




LEVAI Daniel wrote:
> Hi!
>
>
> (Just for the record)
> Regarding PR#6523, OpenBSD 4.9 works with pci.c 1.88 (from OPENBSD_4_9),
> patched with kettenis@'s pci.c patch 1.72 [1].
> I was afraid it won't apply, or there will be incompatibilities with
> other parts, but so far so good.
> (It's unfortuane it broke other systems :( )
>
>
> Anyway, thanks!
>
>
> [1]:
> http://www.openbsd.org/cgi-bin/cvsweb/src/sys/dev/pci/pci.c.diff?r1=1.71;r2=1.72
>
>
>
> Daniel

Re: x336 IBM servers reboots

[Marcos Laufer]

Thanks Daniel,

Downgrading pci.c to 1.72 fixed the problem for me. Now i can install 
OpenBSD on
my ten spare x336 servers .

Best regards,
Marcos


LEVAI Daniel wrote:
> On k, jan 18, 2011 at 12:06:19 -0300, Marcos Laufer wrote:
>   
>> Hello list,
>>
>> I'd like to inform that this problem:
>>
>> http://www.pubbs.net/200910/openbsd/42943-46-reboots-x336-ibm-servers.html
>>
>> keeps happening also with OpenBSD 4.7 and 4.8 .
>> The last version i can install or upgrade on this is 4.5. Didn't try
>> -current yet.
>>
>> I have several of this IBM x336 servers waiting to be running OpenBSD
>> 
>
> http://cvs.openbsd.org/cgi-bin/query-pr-wrapper?full=yes&numbers=6523

x336 IBM servers reboots

[Marcos Laufer]

Hello list,

I'd like to inform that this problem:

http://www.pubbs.net/200910/openbsd/42943-46-reboots-x336-ibm-servers.html

keeps happening also with OpenBSD 4.7 and 4.8 .
The last version i can install or upgrade on this is 4.5. Didn't try 
-current yet.


I have several of this IBM x336 servers waiting to be running OpenBSD

Best regards,
Marcos Laufer

Re: Page fault trap on IBM x336

[Marcos Laufer]

Hello Patrick,

Do you think this could work for 4.8?
How could you compile kernel and ramdisk kernel with the old 1.72 pci.c, 
using another box that boots 4.7?

Regards,
Marcos

Patrick Coleman wrote:
> On Wed, Jun 9, 2010 at 10:47 AM, patrick keshishian  
> wrote:
>   
>> you realize obsd4.5 isn't supported any longer since 4.7 was released.
>> 
>
> Fair enough. I've managed to get 4.7 working by reverting
> /sys/dev/pci/pci.c to 1.72, as suggested in that thread, so I guess
> I'll try that.
>
> Cheers,
>
> Patrick

Re: ahci message

[Marcos Laufer]

Yes , i know i should upgrade . Six months ago i upgraded this machine 
from 3.4 to 4.3 version by version,
and it took a long offline time so i had to stay at 4.3 temporarily , 
and i was planning to upgrade it again from 4.3 to 5.0 next november.


I was just curious about this error message because i had never seen it 
before.


"ahci0: stopping the port, softreset slot 26 was still active"


I was wondering if after this message appeared at least one sata disk is 
no longer working as ahci which
is much faster than regular sata, and a reboot would be needed to put 
everything back to normal.


Regards,
Marcos


LeviaComm Networks escribiC3:

On 03-Nov-10 08:55, Marcos Laufer wrote:

Ok here it goes:

OpenBSD 4.3 (GENERIC.MP) #587: Wed Mar 12 11:21:57 MDT 2008


4.3 is no longer supported.  Please upgrade to at least 4.8-stable, 
your problem may have been fixed in the past 31 Months since your build.


-Christopher Ahrens
-LeviaComm Networks

Re: ahci message

[Marcos Laufer]

ot;Intel 82801I PCIE" rev 0x02: apic 4 int 
17 (irq 255)
pci5 at ppb4 bus 5
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 4 int 
23 (irq 10)
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 4 int 
19 (irq 11)
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 4 int 
18 (irq 9)
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 4 int 
23 (irq 10)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
pci6 at ppb5 bus 6
ichpcib0 at pci0 dev 31 function 0 "Intel 82801IO LPC" rev 0x02: PM disabled
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x02: apic 4 int 
21 (irq 9), AHCI 1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0:  SCSI3 
0/direct fixed
sd0: 76319MB, 9729 cyl, 255 head, 63 sec, 512 bytes/sec, 156301488 sec total
sd1 at scsibus0 targ 1 lun 0:  SCSI3 
0/direct fixed
sd1: 114473MB, 14593 cyl, 255 head, 63 sec, 512 bytes/sec, 234441648 sec 
total
sd2 at scsibus0 targ 2 lun 0:  SCSI3 
0/direct fixed
sd2: 305245MB, 38913 cyl, 255 head, 63 sec, 512 bytes/sec, 625142448 sec 
total
sd3 at scsibus0 targ 3 lun 0:  SCSI3 
0/direct fixed
sd3: 305245MB, 38913 cyl, 255 head, 63 sec, 512 bytes/sec, 625142448 sec 
total
sd4 at scsibus0 targ 5 lun 0:  SCSI3 
0/direct fixed
sd4: 76319MB, 9729 cyl, 255 head, 63 sec, 512 bytes/sec, 156301488 sec total
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 4 
int 18 (irq 9)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem2 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem3 at iic0 addr 0x53: 1GB DDR2 SDRAM non-parity PC2-5300CL5
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: 
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhidev0 at uhub7 port 2 configuration 1 interface 0 "vendor 0x13ba 
Generic USB K/B" rev 1.10/0.01 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub7 port 2 configuration 1 interface 1 "vendor 0x13ba 
Generic USB K/B" rev 1.10/0.01 addr 2
uhidev1: iclass 3/1, 2 report ids
ums0 at uhidev1 reportid 1: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
uhidev2 at uhub6 port 2 configuration 1 interface 0 "Sun Microsystems 
Type 6 Keyboard" rev 1.00/1.02 addr 2
uhidev2: iclass 3/1
ukbd1 at uhidev2: 8 modifier keys, 6 key codes, layout 33
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ukbd1 detached
uhidev2 detached
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
ahci0: stopping the port, softreset slot 26 was still active.
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries



PPP2 escribiC3:
> On Tue, Nov 2, 2010 at 9:01 PM, Marcos Laufer  wrote:
>   
>> Hello list,
>>
>> Does anyone know what this means? "ahci0: stopping the port, softreset slot
>> 26 was still active."
>>
>> Does this mean that ahci has been disabled and now disks are working as
>> regular sata disks?
>> 
>
> What do You mean? AHCI is the SATA controller interface, which all the
> regular SATA discks work with.
>
> The message You've cited says that Your AHCI controller disabled some
> port. Unless You provide the full dmesg noone could help You with more
> details.

ahci message

[Marcos Laufer]

Hello list,

Does anyone know what this means? "ahci0: stopping the port, softreset 
slot 26 was still active."


Does this mean that ahci has been disabled and now disks are working as 
regular sata disks?


Regards,
Marcos

Re: Dynamic web hosting and OpenBSD

[Marcos Laufer]

Is this a prank message?


bsdmas...@hushmail.com escribiC3:

Dear Friends,

I am currently starting my very own hosting business,
as I'm horribly tired of all the incompetence in the
field. Obviously I take security seriously, and therefore
will be using OpenBSD exclusively.

One thing is bothering me though. I've searched the web
and the archives trying to clarify one single point, but
to no avail. I hope you friendly folks would help me.

I want to host my customers websites, but I'm unclear
how OpenBSD web scripting languages support works. I know
for a fact that the base system includes perl, so hosting
perl websites should work without issues. That is good because
many of my customers will be using domains such as domain.pl
I also see Mono is part of the ports, so domain.net should
also work without issue.

The one thing I'm unclear about is example.com domains.
How can I get OpenBSD to run .com files? I found that these
are actualy very old DOS binaries. How do other OpenBSD folks
manage them? Is it with Wine? Qemu running a stripped down XP?

Of course I could write a very good .COM wrapper for ELF I guess,
but I don't want to reinvent the wheel, so if a solution already
exists, I better use it.

So, what is this solution? Or maybe OpenBSD is not compatible yet
with .COM web applications?

PS: by the way, I am ready to offer the OpenBSD project a very good
discount, so maybe it's a good idea to move all the hosting of the
project to my new company once I've ironed out the few remaining 
details.
Service will be very good, high bandwidth and very modern, being 
IPv6 only
(it's the new version of DHCP and DNS with more addresses for your 
machines),

so very future-proof. Just contact me if you need more information.

Thanks,
bsdmaster

wd0 device timeout

[Marcos Laufer]

 using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: 
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: density unknown
mtrr: Pentium Pro MTRR support
uhidev0 at uhub0 port 2 configuration 1 interface 0 "vendor 0x1bcf USB 
Optical Mouse" rev 2.00/0.10 addr 2

uhidev0: iclass 3/1, 2 report ids
ums0 at uhidev0 reportid 1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev0 reportid 2: input=1, output=0, feature=0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b

Regards,
Marcos Laufer

Re: random disconnects on openbsd4.7

[Marcos Laufer]

ebug2: userauth_kbdint
debug2: we sent a keyboard-interactive packet, wait for reply
debug1: Authentications that can continue: 
publickey,password,keyboard-interactive
debug3: userauth_kbdint: disable: no info_req_seen
debug2: we did not send a packet, disable method
debug3: authmethod_lookup password
debug3: remaining preferred:
debug3: authmethod_is_enabled password
debug1: Next authentication method: password
r...@obsd47's password:
debug3: packet_send2: adding 64 (len 58 padlen 6 extra_pad 64)
debug2: we sent a password packet, wait for reply
debug1: Enabling compression at level 6.
debug1: Authentication succeeded (password).
debug1: channel 0: new [client-session]
debug3: ssh_session2_open: channel_new: 0
debug2: channel 0: send open
debug1: Entering interactive session.
debug2: callback start
debug2: client_session2_setup: id 0
debug2: channel 0: request pty-req confirm 0
debug3: tty_make_modes: ospeed 38400
debug3: tty_make_modes: ispeed 38400
debug3: tty_make_modes: 1 3
debug3: tty_make_modes: 2 28
debug3: tty_make_modes: 3 127
debug3: tty_make_modes: 4 21
debug3: tty_make_modes: 5 4
debug3: tty_make_modes: 6 255
debug3: tty_make_modes: 7 255
debug3: tty_make_modes: 8 17
debug3: tty_make_modes: 9 19
debug3: tty_make_modes: 10 26
debug3: tty_make_modes: 11 25
debug3: tty_make_modes: 12 18
debug3: tty_make_modes: 13 23
debug3: tty_make_modes: 14 22
debug3: tty_make_modes: 17 20
debug3: tty_make_modes: 18 15
debug3: tty_make_modes: 30 0
debug3: tty_make_modes: 31 0
debug3: tty_make_modes: 32 0
debug3: tty_make_modes: 33 0
debug3: tty_make_modes: 34 0
debug3: tty_make_modes: 35 0
debug3: tty_make_modes: 36 1
debug3: tty_make_modes: 37 0
debug3: tty_make_modes: 38 1
debug3: tty_make_modes: 39 1
debug3: tty_make_modes: 40 0
debug3: tty_make_modes: 41 1
debug3: tty_make_modes: 50 1
debug3: tty_make_modes: 51 1
debug3: tty_make_modes: 52 0
debug3: tty_make_modes: 53 1
debug3: tty_make_modes: 54 1
debug3: tty_make_modes: 55 0
debug3: tty_make_modes: 56 0
debug3: tty_make_modes: 57 0
debug3: tty_make_modes: 58 0
debug3: tty_make_modes: 59 1
debug3: tty_make_modes: 60 1
debug3: tty_make_modes: 61 1
debug3: tty_make_modes: 62 1
debug3: tty_make_modes: 70 1
debug3: tty_make_modes: 71 0
debug3: tty_make_modes: 72 1
debug3: tty_make_modes: 73 0
debug3: tty_make_modes: 74 0
debug3: tty_make_modes: 75 0
debug3: tty_make_modes: 90 1
debug3: tty_make_modes: 91 1
debug3: tty_make_modes: 92 0
debug3: tty_make_modes: 93 0
debug2: channel 0: request shell confirm 0
debug2: fd 4 setting TCP_NODELAY
debug2: callback done
debug2: channel 0: open confirm rwindow 0 rmax 32768
debug2: channel 0: rcvd adjust 2097152
Last login: Thu Sep  2 21:58:52 2010 from srv1
OpenBSD 4.7-stable (GENERIC.MP) #0: Fri Aug 20 16:38:15 ART 2010

Welcome to OpenBSD: The proactively secure Unix-like operating system.

obsd47:~{1}#
obsd47:~{1}# debug1: channel 0: free: client-session, nchannels 1
debug3: channel 0: status: The following connections are open:
  #0 client-session (t4 r0 i0/0 o0/0 fd 5/6 cfd -1)

debug3: channel 0: close_fds r 5 w 6 e 7 c -1
Read from remote host obsd47: Connection reset by peer
Connection to obsd47 closed.
debug1: Transferred: stdin 0, stdout 0, stderr 92 bytes in 2406.7 seconds
debug1: Bytes per second: stdin 0.0, stdout 0.0, stderr 0.0
debug1: Exit status -1
debug1: compress outgoing: raw data 401, compressed 235, factor 0.59
debug1: compress incoming: raw data 773, compressed 365, factor 0.47
srv1:/root{5241}#





Fred Crowson escribis:
> 2010/8/24 Marcos Laufer :
>   
>> Hello list, i'm having random logoffs from a recently installed OpenBSD 4.7
>> installed on a DL360 server, and updated to stable.
>> The symptoms are simple, i log in, wait a while, and i get suddenly logged
>> off.
>>
>> It goes like this:
>>
>> obsd47:~{8}#
>> Read from remote host obsd47: Connection reset by peer
>> Connection to obsd47 closed.
>> srv1:/root{4994}#
>> srv1:/root{4994}#
>> srv1:/root{4994}# ssh obsd47
>> r...@obsd47's password:
>> Last login: Mon Aug 23 22:04:07 2010 from srv1
>> OpenBSD 4.7-stable (GENERIC.MP) #0: Fri Aug 20 16:38:15 ART 2010
>>
>> 
>
> Hi,
>
> Using ssh -vvv might give some further clues to the issue.
>
> hth
>
> Fred

random disconnects on openbsd4.7

[Marcos Laufer]

Hello list, i'm having random logoffs from a recently installed OpenBSD 4.7
installed on a DL360 server, and updated to stable.
The symptoms are simple, i log in, wait a while, and i get suddenly 
logged off.


It goes like this:

obsd47:~{8}#
Read from remote host obsd47: Connection reset by peer
Connection to obsd47 closed.
srv1:/root{4994}#
srv1:/root{4994}#
srv1:/root{4994}# ssh obsd47
r...@obsd47's password:
Last login: Mon Aug 23 22:04:07 2010 from srv1
OpenBSD 4.7-stable (GENERIC.MP) #0: Fri Aug 20 16:38:15 ART 2010

Welcome to OpenBSD: The proactively secure Unix-like operating system.

obsd47:~{1}# dmesg
OpenBSD 4.7-stable (GENERIC.MP) #0: Fri Aug 20 16:38:15 ART 2010
   r...@obsd47.test.com:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 931 MHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MM  
X,FXSR,SSE

real mem  = 536424448 (511MB)
avail mem = 511025152 (487MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf, 
SMBIOS   rev. 2.3 @ 0xf206c 
(23 entries)

bios0: vendor Compaq version "P21" date 01/09/2001
bios0: Compaq ProLiant DL360
acpi0 at bios0: rev 0, can't enable ACPI
mpbios0 at bios0: Intel MP Specification 1.4
cpu0 at mainbus0: apid 3 (boot processor)
cpu0: apic clock running at 132MHz
cpu1 at mainbus0: apid 0 (application processor)
cpu1: Intel Pentium III ("GenuineIntel" 686-class) 931 MHz
cpu1: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MM  
X,FXSR,SSE

mpbios0: bus 0 is type PCI
mpbios0: bus 3 is type PCI
mpbios0: bus 9 is type ISA
ioapic0 at mainbus0: apid 8 pa 0xfec0, version 11, 35 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
bios0: ROM list: 0xc/0x8000 0xc8000/0x4000! 0xe8000/0x6000 
0xee000/0x2000!

pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20LE Host" rev 0x05
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20LE Host" rev 0x05
pci1 at pchb1 bus 3
fxp0 at pci1 dev 4 function 0 "Intel 8255x" rev 0x08, i82559: apic 8 int 
17 (irq   7), address 
00:50:8b:e2:bd:7b

inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
fxp1 at pci1 dev 5 function 0 "Intel 8255x" rev 0x08, i82559: apic 8 int 
24 (irq   10), address 
00:50:8b:e2:bd:7a

inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
cac0 at pci0 dev 1 function 0 "Symbios Logic 53c1510" rev 0x02: apic 8 
int 19 (i  rq 5), Integrated 
Array

scsibus0 at cac0: 2 targets
sd0 at scsibus0 targ 0 lun 0:  SCSI2 0/direct fixed
sd0: 17359MB, 512 bytes/sec, 35553120 sec total
sd1 at scsibus0 targ 1 lun 0:  SCSI2 0/direct fixed
sd1: 17359MB, 512 bytes/sec, 35553120 sec total
vga1 at pci0 dev 3 function 0 "ATI Mach64" rev 0x7a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Compaq Netelligent ASMC" rev 0x00 at pci0 dev 4 function 0 not configured
ohci0 at pci0 dev 5 function 0 "Opti 82C861" rev 0x10: apic 8 int 21 
(irq 3), ve  rsion 1.0, 
legacy support
piixpm0 at pci0 dev 15 function 0 "ServerWorks OSB4" rev 0x51: SMBus 
disabled

pciide0 at pci0 dev 15 function 1 "ServerWorks OSB4 IDE" rev 0x00: DMA
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0:  ATAPI 5/cdrom 
removable

cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "Opti OHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: 
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
obsd47:~{3}#

Does anyone sees the same behaviour?

Regards,
Marcos Laufer

pf scrub doubt

[Marcos Laufer]

Hello list,

I'm just in doubt in how to replace the sentence for OpenBSD 4.7 :
scrub in all

Is it just like this? : 
match in all scrub


If so, should this be updated in http://www.openbsd.org/faq/pf/scrub.html ?

Thanks!
Marcos

Re: mount ffs as msdos, system hangs

[Marcos Laufer]

Chris Bennett escribis:

frantisek holop wrote:

hi there,

i have just managed to "mount" an ffs partition
as msdos.  the the system promptly dies.

$ sudo fdisk sd0
Disk: sd0   geometry: 120/255/63 [1935360 Sectors]
Offset: 0   Signature: 0xAA55
Starting Ending LBA Info:
 #: id  C   H   S -  C   H   S [   start:size ]
--- 

 0: A6  0   1   1 -119 254  63 [  63: 1927737 ] 
OpenBSD  1: 00  0   0   0 -  0   0   0 [   
0:   0 ] unused   2: 00  0   0   0 -  0   0   0 
[   0:   0 ] unused   3: 00  0   0   0 -  
0   0   0 [   0:   0 ] unused 
$ sudo mount -t msdos -o nodev,nosuid,-x,-l,-m666 /dev/sd0a /mnt

$
[dead system]

can anybody reproduce this?

If I plug my 110volt computer into a 220volt socket, it will promptly 
die too!


Why on earth would you even try to do this?




That's no excuse. The point here is that any unprivileged user can hang 
the system at will.

Re: Apache - bandwidth usage limit per vhost

[Marcos Laufer]

> On 9 Mar 2010, at 17:42, Ozgur Kazancci wrote:
>
>   
>> I'd like to set a (monthly) bandwidth quota limit to my Apache virtualhosts.
>> 
>> For instance, domain.com would have an amount of 10G/Month bandwidth limit
>> (and in case of exceeding the limit, it'd get redirected to a "Bandwidth 
>> limit exceeded" alert page.)
>> 
>
> I too would be very interested in something that works with the stock Apache
> in 4.6.
>
> Gaby.
>
> --
> Imagine there were no hypothetical situations.
> http://playr.co.uk/
>   

Then what you need is exactly mod_throttle.
mod_throttle project is discontinued but the latest version works just 
fine and does it job very well.
I use it with stock Apache since OpenBSD 3.4 and never had problems with it.

Regards,

Marcos Laufer
* marcos <mailto:mar...@ipversion4.com>@ipversion4.com 
<mailto:mar...@ipversion4.com>
CTO

Ipversion4.com
http://www.ipversion4.com <http://www.ipversion4.com/>
( 0800-444-HOSTING
Rodriguez Peqa 468 1 C

nmbclust command not found within config

[Marcos Laufer]

Hello list,

Looking at this faq page http://www.openbsd.org/faq/faq5.html#config
it shows that under OpenBSD 4.5 modifying NMBCLUSTERS is possible.

--- cuted from http://www.openbsd.org/faq/faq5.html#config 

$ *sudo config -e /bsd*
OpenBSD 4.5 (GENERIC) #1749: Sat Feb 28 14:51:18 MST 2009
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
warning: no output file specified
Enter 'help' for information
ukc> ?
helpCommand help list
add dev Add a device
base8|10|16 Base on large numbers
change  devno|dev   Change device
disable attr val|devno|dev  Disable device
enable  attr val|devno|dev  Enable device
finddevno|dev   Find device
listList configuration
lines   count   # of lines per page
show[attr [val]]Show attribute
exitExit, without saving changes
quitQuit, saving current changes
timezone[mins [dst]]Show/change timezone
nmbclust[number]Show/change NMBCLUSTERS
cachepct[number]Show/change BUFCACHEPERCENT
nkmempg [number]Show/change NKMEMPAGES
shmseg  [number]Show/change SHMSEG
shmmaxpgs   [number]Show/change SHMMAXPGS

---end---


But when trying it there's no option to do it. The nmbclust command does
not exist, despite of that the faq says.

hq:/{2561}# config -e /bsd
OpenBSD 4.5 (GENERIC) #1749: Sat Feb 28 14:51:18 MST 2009
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
warning: no output file specified
Enter 'help' for information
ukc> p
Invalid command 'p'.  Try 'help'.
ukc> help
helpCommand help list
add dev Add a device
base8|10|16 Base on large numbers
change  devno|dev   Change device
disable attr val|devno|dev  Disable device
enable  attr val|devno|dev  Enable device
finddevno|dev   Find device
listList configuration
lines   count   # of lines per page
show[attr [val]]Show attribute
exitExit, without saving changes
quitQuit, saving current changes
timezone[mins [dst]]Show/change timezone
cachepct[number]Show/change BUFCACHEPERCENT
nkmempg [number]Show/change NKMEMPAGES
shmseg  [number]Show/change SHMSEG
shmmaxpgs   [number]Show/change SHMMAXPGS
ukc>
 




What's the right way to increment NMBCLUSTERS now?

Regards,
Marcos Laufer

Re: How to determine what ports are being used?

[Marcos Laufer]

You could fire up the VPN, connect to it from the outside, and then use the
netstat command to see which ports are beeing used knowing the
origin and destination IPs

Regards,
Marcos Laufer


stan wrote:

I have a home network tat uses an OpenBSD machine as it's firewall. I now
have a company laptop (Windows), and it has some sort of "Microsoft VPN". If
it remove my "block all" rule I can get this VPN up. The corporate
"support" folks say that it uses port 1723, but putting thta in pf.conf
and restarting (with the block all) rule sill does not allow it to work. 


If I turn off the block all rule, and fire up the VPN, how can I
determine what ports it is using, so that I can create the correct pf.conf
rules?

Re: Net-SNMP in 4.5

[Marcos Laufer]

Donald,

Compile it from ports and it will work. There's something wrong with the 
pre-compiled package



Donald Reichert escribis:

Hello list,

I know, 4.6 has been out for a while now... However, I run 4.5 (i386) on a pair 
of very heavily used load balancers (relayd), and due to some customer 
requirements I would need some statistics (traffic, etc).

I thought of using Net-SNMP, but a guy in IRC told me that in OpenBSD 4.5 it is 
broken? I search on the mailing lists, but didn't find mails regarding to this.

However, does anybody know if there's a problem on 4.5? If there is some 
problem, is it fixed on 4.6?

Best regards and please excuse my bad english,

Donald

problem compiling kde4

[Marcos Laufer]

4.0.1p2/build-i386/CMakeFiles  33

[ 34%] Built target kiten_bin
make -f klettres/src/CMakeFiles/klettres.dir/build.make 
klettres/src/CMakeFiles/klettres.dir/depend
make -f klettres/src/CMakeFiles/klettres.dir/build.make 
klettres/src/CMakeFiles/klettres.dir/build
/usr/local/bin/cmake -E cmake_progress_report 
/u/data/ports/obj/kdeedu-4.0.1p2/build-i386/CMakeFiles  35

[ 35%] Built target klettres
make -f kmplot/kmplot/CMakeFiles/kmplot.dir/build.make 
kmplot/kmplot/CMakeFiles/kmplot.dir/depend
make -f kmplot/kmplot/CMakeFiles/kmplot.dir/build.make 
kmplot/kmplot/CMakeFiles/kmplot.dir/build
/usr/local/bin/cmake -E cmake_progress_report 
/u/data/ports/obj/kdeedu-4.0.1p2/build-i386/CMakeFiles  36

[ 36%] Built target kmplot
make -f kmplot/kmplot/CMakeFiles/kmplotpart.dir/build.make 
kmplot/kmplot/CMakeFiles/kmplotpart.dir/depend
make -f kmplot/kmplot/CMakeFiles/kmplotpart.dir/build.make 
kmplot/kmplot/CMakeFiles/kmplotpart.dir/build
/usr/local/bin/cmake -E cmake_progress_report 
/u/data/ports/obj/kdeedu-4.0.1p2/build-i386/CMakeFiles

[ 36%] Building CXX object kmplot/kmplot/CMakeFiles/kmplotpart.dir/view.o
/usr/bin/c++   -Dkmplotpart_EXPORTS -O2 -pipe   -Woverloaded-virtual -O2 
-DNDEBUG -DQT_NO_DEBUG -fPIC 
-I/u/data/ports/obj/kdeedu-4.0.1p2/build-i386/kmplot/kmplot 
-I/usr/ports/obj/kdeedu-4.0.1p2/kdeedu-4.0.1/kmplot/kmplot 
-I/usr/ports/obj/kdeedu-4.0.1p2/kdeedu-4.0.1 
-I/u/data/ports/obj/kdeedu-4.0.1p2/build-i386 -I/usr/local/include 
-I/usr/local/include/KDE -I/usr/X11R6/include 
-I/usr/local/include/X11/qt4 -I/usr/local/include/X11/qt4/Qt 
-I/usr/local/lib/qt4/mkspecs/default -I/usr/local/include/X11/qt4/QtCore 
-I/usr/local/include/X11/qt4/QtGui 
-I/usr/local/include/X11/qt4/Qt3Support 
-I/usr/local/include/X11/qt4/QtAssistant 
-I/usr/local/include/X11/qt4/QtDesigner 
-I/usr/local/include/X11/qt4/QtNetwork 
-I/usr/local/include/X11/qt4/QtOpenGL -I/usr/local/include/X11/qt4/QtSql 
-I/usr/local/include/X11/qt4/QtXml -I/usr/local/include/X11/qt4/QtSvg 
-I/usr/local/include/X11/qt4/QtScript 
-I/usr/local/include/X11/qt4/QtUiTools 
-I/usr/local/include/X11/qt4/QtTest -I/usr/local/include/X11/qt4/QtDBus 
-I/usr/local/include/libpng   -DQT_SHARED -D_GNU_SOURCE -DQT_NO_STL 
-DQT_NO_CAST_TO_ASCII -D_REENTRANT -DKDE_DEPRECATED_WARNINGS -o 
kmplot/kmplot/CMakeFiles/kmplotpart.dir/view.o -c 
/usr/ports/obj/kdeedu-4.0.1p2/kdeedu-4.0.1/kmplot/kmplot/view.cpp
/usr/ports/obj/kdeedu-4.0.1p2/kdeedu-4.0.1/kmplot/kmplot/view.cpp: In 
member
  function `QPointF View::toPixel(const QPointF&, View::ClipBehaviour, 
const

  QPointF&)':
/usr/ports/obj/kdeedu-4.0.1p2/kdeedu-4.0.1/kmplot/kmplot/view.cpp:434: 
error: `

  isnan' undeclared (first use this function)
/usr/ports/obj/kdeedu-4.0.1p2/kdeedu-4.0.1/kmplot/kmplot/view.cpp:434: 
error: (Each

  undeclared identifier is reported only once for each function it appears
  in.)
/usr/ports/obj/kdeedu-4.0.1p2/kdeedu-4.0.1/kmplot/kmplot/view.cpp:454: 
error: `

  isinf' undeclared (first use this function)
*** Error code 1

Stop in /u/data/ports/obj/kdeedu-4.0.1p2/build-i386 (line 269 of 
kmplot/kmplot/CMakeFiles/kmplotpart.dir/build.make).

*** Error code 1

Stop in /u/data/ports/obj/kdeedu-4.0.1p2/build-i386 (line 3168 of 
CMakeFiles/Makefile2).

*** Error code 1

Stop in /u/data/ports/obj/kdeedu-4.0.1p2/build-i386 (line 115 of Makefile).
*** Error code 1

Stop in /usr/ports/x11/kde4/edu (line 2189 of 
/usr/ports/infrastructure/mk/bsd.port.mk).

===> Exiting x11/kde4/edu with an error
*** Error code 1

Stop in /u/data/ports/x11/kde4 (line 129 of 
/usr/ports/infrastructure/mk/bsd.port.subdir.mk).

pc03:/u/data/ports/x11/kde4{2}#


Regards,
Marcos Laufer

Re: automating 'fsck -y' after a power failure

[Marcos Laufer]

Jose, this is an ugly modification in /etc/rc but it should do what you 
need.


Search for the line that starts with 8) and modify it to look like this:



   8)
   echo "Corro FSCK de emergencia..."
   fsck -y ; fsck_st=$?
   if [ $fsck_st != 0 ]; then
 echo "Automatic file system check failed; help!"
 exit 1
   fi
   ;;


Regards,
Marcos


Jose Fragoso wrote:

Hi,

Is it possible to automate the process of
running

fsck -y

after a power or other type of failure,
in cases the automatic file system check fails?

Thanks in advance.

Regards,

Jose

--
An Excellent Credit Score is 750
See Yours in Just 2 Easy Steps!

Re: LaCie

[Marcos Laufer]

I've installed two of these on a MacOS X the day before i posted my 
message and i liked
them a lot. I'd love to use them with my OpenBSD server farm


Brian A. Seklecki escribis:
> On Tue, 2009-08-04 at 13:53 -0300, Marcos Laufer wrote:
>   
>> Hello, has anyone had any experience with LaCie Raid and Storage
>> 
>
> very Feng shui
>
> ~BAS 
>  
>   "I'm the kind of Mac-using sociopath that looks at an external
>NAS and asks: 'What kind of RAID array defines me as a person?'"

LaCie

[Marcos Laufer]

Hello, has anyone had any experience with LaCie Raid and Storage
products?

For example this beautiful Raid boxes:
http://www.lacie.com/es/products/product.htm?pid=8

Regards,
Marcos

Re: resolution 1280x1024 not working when upgrading 4.4 -> 4.5 with intel(4) driver [solved]

[Marcos Laufer]

Sorry for the noise .  I was misconfiguring the horiz sync



Marcos Laufer wrote:

Hello List,

I upgraded my workstation from 4.4 to 4.5 and i lost the 1280x1024 
resolution
in X. I had the i810(4) driver which has been removed/replaced with the 
intel(4) 
driver.  Which other driver should i try to achieve same resolution? It 
works

with 1024x768 at most


This is dmesg:

OpenBSD 4.5 (GENERIC) #1749: Sat Feb 28 14:51:18 MST 2009
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
RTC BIOS diagnostic error 80
cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CNXT-ID,CX16,xTPR

real mem  = 1061588992 (1012MB)
avail mem = 1018200064 (971MB)
RTC BIOS diagnostic error 80
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/28/07, SMBIOS rev. 2.4 @ 
0xe44f0 (27 entries)
bios0: vendor Intel Corp. version "NL94510J.86A.0017.2007.0828.1137" 
date 08/28/2007

bios0: Intel Corporation D945GCNL
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC WDDT MCFG ASF! HPET SSDT SSDT SSDT SSDT SSDT
acpi0: wakeup devices SLPB(S4) P32_(S4) PS2M(S4) PS2K(S4) UAR1(S4) 
UAR2(S4) PEG0(S4) PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) PEX4(S4) PEX5(S4) 
UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) EHCI(S3) AC9M(S4) AZAL(S4)

acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 5 (P32_)
acpiprt2 at acpi0: bus -1 (PEG0)
acpiprt3 at acpi0: bus 1 (PEX0)
acpiprt4 at acpi0: bus 2 (PEX1)
acpiprt5 at acpi0: bus 3 (PEX2)
acpiprt6 at acpi0: bus 4 (PEX3)
acpiprt7 at acpi0: bus -1 (PEX4)
acpiprt8 at acpi0: bus -1 (PEX5)
acpicpu0 at acpi0: FVS, 3000, 2400 MHz
acpibtn0 at acpi0: SLPB
bios0: ROM list: 0xc/0xae00!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945G Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82945G Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0x4000, size 0x1000
inteldrm0 at vga1: apic 2 int 16 (irq 11)
drm0 at inteldrm0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 2 int 
17 (irq 255)

pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: apic 2 int 
16 (irq 255)

pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x01: RTL8168 2 
(0x3800), apic 2 int 17 (irq 9), address 00:1c:c0:0e:24:4e

rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01: apic 2 int 
18 (irq 255)

pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01: apic 2 int 
19 (irq 255)

pci4 at ppb3 bus 4
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 
23 (irq 10)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int 
19 (irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int 
18 (irq 9)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2 int 
16 (irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 
23 (irq 10)

usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci5 at ppb4 bus 5
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, 
channel 0 configured to compatibility, channel 1 configured to compatibility

wd0 at pciide0 channel 0 drive 0: 
wd0: 16-sector PIO, LBA, 76319MB, 156301488 sectors
wd1 at pciide0 channel 0 drive 1: 
wd1: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, 
channel 0 configured to native-PCI, channel 1 configured to native-PCI

pciide1: using apic 2 int 19 (irq 11) for native-PCI interrupt
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 2 
int 19 (irq 11)

iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1

resolution 1280x1024 not working when upgrading 4.4 -> 4.5 with intel(4) driver

[Marcos Laufer]

B revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: 
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b





-- 

Marcos Laufer
* marcos <mailto:mar...@ipversion4.com>@ipversion4.com 
<mailto:mar...@ipversion4.com>
CTO

Ipversion4.com
http://www.ipversion4.com <http://www.ipversion4.com/>
( 0800-444-HOSTING
Rodriguez Peqa 468 1 C

Re: doubts on NFS

[Marcos Laufer]

I was told by a little bird on this list to set the -root=0 option, 
maybe little bird meant -maproot=0 :)
And yes, i HUPed.

But it's all working now,  the magic was to add the missing line to fstab.

Thanks everybody for your tips and help on this

Regards,
Marcos Laufer

Jan Stary escribis:
> On Jul 06 22:53:21, Marcos Laufer wrote:
>   
>> Edd ,
>>
>> This are the permissions:
>>
>> hq:/{19}# ls -al |grep mnt
>> drwxr-xr-x   2 root  wheel  512 Nov  3  2008 mnt/
>> hq:/{20}#
>>
>> I am mounting this as root .
>>
>> I also added -root=0 to /etc/exports ,
>> 
>
> There is no such option.  Do you mean maproot?
> Did you HUP mountd after you changed the config file?
>
>   
>> still same behavior
>> Regards,
>> Marcos Laufer

Re: doubts on NFS

[Marcos Laufer]

Sorry, the 10.10.10.101 was a mistyping of mine. It's another IP i used 
to try mounting the slice from.
I removed it and not HUPed mountd, that's why it showed up with showmount.

This are the permissions you just asked:

backup:~{2}# cd /u/data/
backup:/u/data{3}# ls a-l|grep export
ls: a-l: No such file or directory
backup:/u/data{4}# ls -al|grep export
drwxr-xr-x   2 root  wheel   512 Jul  6 21:29 export/
backup:/u/data{5}#


Jan Stary escribis:
> On Jul 06 16:40:31, Marcos Laufer wrote:
>   
>> Hello list ,
>>
>> I am having trouble to make NFS work properly. I don't know what i am  
>> doing wrong, maybe someone can enlighten me.
>>
>> NFS server and client are both OpenBSD 4.4 GENERIC
>>
>> I am starting portmap, nfsd and mountd on the nfs server (10.10.10.65).
>>
>>
>> This is my /etc/exports on 10.10.10.65:
>>
>> #   $OpenBSD: exports,v 1.2 2002/05/31 08:15:44 pjanzen Exp $
>> #
>> # NFS exports Database
>> # See exports(5) for more information.  Be very careful:  misconfiguration
>> # of this file can result in your filesystems being readable by the world.
>>
>> /u/data/export  -alldirs -maproot=0 10.10.10.16
>>
>> --
>>
>>
>> On the client machine (10.10.10.16) :
>>
>> hq:/{190}# showmount -e 10.10.10.65
>> Exports list on 10.10.10.65:
>> /u/data/export 10.10.10.16 10.10.10.101
>> 
>
> Why is this different from what the server actually exports?
> Namely, how did 10.10.10.101 get in here?
>
>   
>> hq:/{191}# mount -o rw -t nfs 10.10.10.65:/u/data/export /mnt/
>> hq:/{192}# df -h
>> FilesystemSizeUsed   Avail Capacity  Mounted on
>> /dev/wd0a 509M   74.7M409M15%/
>> /dev/wd0d 508M4.2M478M 1%/tmp
>> /dev/wd0e 3.9G2.6G1.2G69%/usr
>> /dev/wd0f 508M   78.9M403M16%/var
>> /dev/wd0g 949M2.7M899M 0%/var/log
>> /dev/wd0h65.0G   43.5G   18.2G70%/u
>> 10.10.10.65:/u/data/export   65.0G   40.4G   21.3G65%/mnt
>>
>> So far so good. Then i try to write something:
>>
>> hq:/{193}# cd /mnt/   
>> 
>>
>> hq:/mnt{194}# cp /bin/ls ./   
>> 
>>
>> cp: ./ls: Permission denied
>> hq:/mnt{195}#
>>
>> What am i doing wrong here?
>> 
>
> What are the permissions of /u/data/export on the server?

Re: doubts on NFS [solved]

[Marcos Laufer]

I;ve just solved it . Adding this the line to /etc/fstab on the client 
machine just let me mount it and write on it.
I had no need to reboot or restart anything.

hq:/{109}# cat /etc/fstab
/dev/wd0a / ffs rw,softdep 1 1
/dev/wd0d /tmp ffs rw,softdep,nodev,nosuid 1 2
/dev/wd0e /usr ffs rw,softdep,nodev 1 2
/dev/wd0f /var ffs rw,softdep,nodev,nosuid 1 2
/dev/wd0g /var/log ffs rw,softdep,nodev,nosuid 1 2
/dev/wd0h /u ffs rw,softdep,nodev,nosuid 1 2
10.10.10.65:/u/data/export /mnt ffs rw,softdep,nodev,nosuid 1 2

hq:/{110}#
hq:/{110}# df -h
FilesystemSizeUsed   Avail Capacity  Mounted on
/dev/wd0a 509M   74.7M409M15%/
/dev/wd0d 508M4.2M478M 1%/tmp
/dev/wd0e 3.9G2.6G1.2G69%/usr
/dev/wd0f 508M   78.9M403M16%/var
/dev/wd0g 949M2.7M899M 0%/var/log
/dev/wd0h65.0G   43.5G   18.2G70%/u
10.10.10.65:/u/data/export   65.0G   40.4G   21.3G65%/mnt
hq:/{111}# umount /mnt/
hq:/{112}# mount -o rw -t nfs 10.10.10.65:/u/data/export /mnt/
hq:/{113}# > /mnt/hjdjfahjda
hq:/{114}#




Johan Torin escribis:
> On Monday 06 July 2009, Marcos Laufer wrote:
>   
>> Hello list ,
>>
>> I am having trouble to make NFS work properly. I don't know what i am
>> doing wrong, maybe
>> someone can enlighten me.
>>
>> 
>
> [config]
>
>   
>> 10.10.10.65:/u/data/export   65.0G   40.4G   21.3G65%/mnt
>>
>> So far so good. Then i try to write something:
>>
>> hq:/{193}# cd
>> /mnt/
>>
>> hq:/mnt{194}# cp /bin/ls
>> ./
>>
>> cp: ./ls: Permission denied
>> hq:/mnt{195}#
>>
>> What am i doing wrong here?
>> 
>
> What's your protection on the mount point of the /u/data/export directory 
> *before* mounting the slice on it? It's not the same protection mask before 
> and after...
>
> /Johan

Re: doubts on NFS

[Marcos Laufer]

Edd ,

This are the permissions:

hq:/{19}# ls -al |grep mnt
drwxr-xr-x   2 root  wheel  512 Nov  3  2008 mnt/
hq:/{20}#

I am mounting this as root .

I also added -root=0 to /etc/exports , still same behavior

Regards,
Marcos Laufer

Edd Barrett escribis:
> On Mon, Jul 06, 2009 at 04:40:31PM -0300, Marcos Laufer wrote:
>   
>> So far so good. Then i try to write something:
>> 
>
> Well, what are the permissions on the directory you are trying to write
> to? Bear in mind, the user ID's (not the names) will need to be
> synchronised across machines for NFS permissions to make sense.
>
> You might consider a YP domain?

doubts on NFS

[Marcos Laufer]

Hello list ,

I am having trouble to make NFS work properly. I don't know what i am 
doing wrong, maybe

someone can enlighten me.

NFS server and client are both OpenBSD 4.4 GENERIC

I am starting portmap, nfsd and mountd on the nfs server (10.10.10.65).


This is my /etc/exports on 10.10.10.65:

#   $OpenBSD: exports,v 1.2 2002/05/31 08:15:44 pjanzen Exp $
#
# NFS exports Database
# See exports(5) for more information.  Be very careful:  misconfiguration
# of this file can result in your filesystems being readable by the world.

/u/data/export  -alldirs -maproot=0 10.10.10.16

--


On the client machine (10.10.10.16) :

hq:/{190}# showmount -e 10.10.10.65
Exports list on 10.10.10.65:
/u/data/export 10.10.10.16 10.10.10.101
hq:/{191}# mount -o rw -t nfs 10.10.10.65:/u/data/export /mnt/
hq:/{192}# df -h
FilesystemSizeUsed   Avail Capacity  Mounted on
/dev/wd0a 509M   74.7M409M15%/
/dev/wd0d 508M4.2M478M 1%/tmp
/dev/wd0e 3.9G2.6G1.2G69%/usr
/dev/wd0f 508M   78.9M403M16%/var
/dev/wd0g 949M2.7M899M 0%/var/log
/dev/wd0h65.0G   43.5G   18.2G70%/u
10.10.10.65:/u/data/export   65.0G   40.4G   21.3G65%/mnt

So far so good. Then i try to write something:

hq:/{193}# cd 
/mnt/   

hq:/mnt{194}# cp /bin/ls 
./   


cp: ./ls: Permission denied
hq:/mnt{195}#

What am i doing wrong here?

Thanks in advance for your help

Regards,
Marcos Laufer

mailgraph and chroot

[Marcos Laufer]

Hi there,

Is there any How-To on a way of making the mailgraph package work with 
the chrooted Apache?


Regards,

Re: ftp limits bandwidth

[Marcos Laufer]

This is a very interesting subject.
Is there any official paper describing how to tune TCP on OpenBSD?
Googling i found this two interesting links, but none specifically 
mentions OpenBSD:


Enabling high performance data transfers
http://www.psc.edu/networking/projects/tcptune/

TCP tuning cookbook
http://proj.sunet.se/E2E/tcptune.html

This other paper is about OpenBSD, but i do not know how accurate is it:

Network and speed performance guide (OpenBSD)
https://calomel.org/network_performance.html

Opinions?

Marcos



Markus Hennecke escribis:

Jesus Sanchez schrieb:

Jean-Frangois SIMON escribis:

Hi all,

It looks like the max bandwidth of ftp is somehow 350 Kb/s.
Is this normaland if so can it be increased ?


?? it must be your bandwidth limit, there's nothing
about a 350 kb/s limit anywhere. please, read carefulle
the ftp manpage.


As there are some information missing, I look into my crystal ball and 
see that Jean-Frangois is downloading with help of the ftp program via 
DSL which is either 6Mbit or faster.


Due to the latency of the DSL line the standard settings for 
net.inet.tcp.recvspace (see sysctl) are not correct for this kind of 
setup. He should try to increase it, for me 65536 works on 6Mbit DSL.


Please tell me in case this is all wrong so that I can order a new 
crystal ball!


Enough guessing, HTH
  Markus

Re: Intel D945GCNL with OpenBSD 4.4 Hangs

[Marcos Laufer]

Marcello if you like that Series of Intel motherboards, i can assure you 
that D945GCPE works just fine:


OpenBSD 4.2-stable (GENERIC) #0: Fri Mar 28 15:20:03 ART 2008
   root@<:/u/system/src/sys/arch/i386/compile/GENERIC
RTC BIOS diagnostic error 80
cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CNXT-ID,CX16,xTPR

real mem  = 1062670336 (1013MB)
avail mem = 1019904000 (972MB)
RTC BIOS diagnostic error 80
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 07/10/07, SMBIOS rev. 2.5 @ 
0xe4440 (35 entries)
bios0: vendor Intel Corp. version "PE94510M.86A.0050.2007.0710.1559" 
date 07/10/2007

bios0: Intel Corporation D945GCPE
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown, estimated 0:00 hours
apm0: flags 30102 dobusy 0 doidle 1
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xc/0xae00!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GP" rev 0x02: rng active, 
800Kb/sec
vga1 at pci0 dev 2 function 0 "Intel 82945G Video" rev 0x02: aperture at 
0x4000, size 0x1000

wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8101E" rev 0x01: RTL8101E 
(0x3400), irq 11, address 00:1c:c0:0b:99:2e

rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
pci2 at ppb1 bus 2
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, 
channel 0 configured to compatibility, channel 1 configured to compatibility

pciide0: channel 0 disabled (no drives)
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, 
channel 0 configured to native-PCI, channel 1 configured to native-PCI

pciide1: using irq 10 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: 
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd1 at pciide1 channel 0 drive 1: 
wd1: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: irq 10
iic0 at ichiic0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: 
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask f7fd netmask fffd ttymask 
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a swap on wd0b dump on wd0b


Marcello Cruz escribis:
1) I updated the BIOS to NL94510J.86A.0033.2008.0807.1932. This is the 
most recent BIOS available from Intel to this board. The old BIOS was 
NL94510J.86A.0017.2007.0828.1137. Accordingly to the flash utility, I 
cannot use a BIOS update with different prefix (NL94510J.86A).


2) Following another post I disabled APM. With version 4.3 (OpenBSD), 
it worked, but the system become unstable and I lose connectivity with 
remote SSH sessions. With version 4.4 (OpenBSD) the system hangs at 
"mtrr: Pentium Pro MTRR Support".


3) Then I tried to disable ACPI. With version 4.3 the system hangs at 
"npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16". 
With version 4.4 (OpenBSD) the system hangs when I activate the second 
NIC (up, dhcp or IP address).


4) Then I installed version 4.4 on a different hardware with the 3 NIC 
(3Com 3c905B 100Base-TX, DLink DFE-520TX, plus the on-board NIC with 
Realket chipset). The system works with no problem. So, I realize the 
problem is with the motherboard. But where?


5) A page 
(http://www.intel.com/support/motherboards/desktop/sb/CS-008326.htm) 
from Intel say that there is support for Linux.


What does "RTC BIOS diagnostic error 80" mean? Any clues?

The best option is to ask the dealer to replace the board for another 
wich supports Linux. Is that right? Or, is there another solution?


Rgds
Marcello

OpenBSD 4.4 (GENERIC) #1021: Tue Aug 12 17:16:55 MDT 2008
   dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
RTC BIOS diagnostic error 80
cpu0: Intel(R) Celeron(R) CPU 430 @ 1.80GHz ("GenuineIntel" 686-class) 
1.80 GHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,SSE3,MWAIT,DS-CPL,TM2,CX16,xTPR 


real mem  = 1062412288 (1013MB)
avail mem = 1018851328 (971MB)
RTC BIOS diagnostic error 80
mainbus0 

Re: VPN client-to-site over IPSec

[Marcos Laufer]

Marcello ,

If you don't mind, i'd like to know more info or what to read to 
acomplish your first scenario:


PC -- Internet -- OpenBSD  LAN
PC  IPSec Tunnel -- LAN

Thanks!
Marcos Laufer

Marcello Cruz escribiC3:

Toni,

Do you mean a VPN where only a HOST will access an entire NETWORK? If 
so, then the answer is YES.


For instance, I have some OpenBSD servers acting as VPN Server and 
they allow me to connect from home to the networks behind those 
OpenBSD servers.


PC -- Internet -- OpenBSD  LAN
PC  IPSec Tunnel -- LAN

I also have other situations where I need an entire LAN communicate 
with other LAN, like:


LAN -- OpenBSD/Other -- Internet --- OpenBSD -- LAN
LAN --- IPSec Tunnel --- LAN

What do you need?

- Original Message - From: "Toni Mueller" 
To: 
Sent: Friday, April 03, 2009 5:43 PM
Subject: Re: VPN client-to-site over IPSec



Hi,

On Fri, 03.04.2009 at 12:43:33 -0300, JoC#o Salvatti 
 wrote:

Is it possible to implement a client-to-site VPN over IPSec? I have
searched on the web, but only found site-to-site models.


what exactly do you mean by "client to site"?

You can distinguish between transport mode, where you use the IP that
you actually use, as an endpoint, and tunnel mode, where you assign an
IP of your chosing for use inside the tunnel, and then use that IP for
all of your connections.

Usually, "site-to-site" is associated with tunnel mode, and I currently
see no reason, and much less any advantage, in using transport mode.


Kind regards,
--Toni++

Re: OpenBSD on IBM 3550

[Marcos Laufer]

Ricardo,

Yo supongo que te va a funcionar, si llegas a tener la posibilidad de 
probarlo decime como te fue!


Saludos,
Marcos

Ricardo Augusto de Souza escribis:

Hi,



I have an IBM 3550 with SAS disks and Adaptec ServeRAID 8k controller
and I AM NOT able to install openBSD on it.

Installation didn't find any hard disk during installation.



According with http://www.openbsd.org/i386.html
  it works with adaptec serveraid.



If I change SAS to SATA disks will openBSD recognize them at
installation ?





Thanks

Re: 1U IBM or Dell server for firewall

[Marcos Laufer]

Insan, (or anyone who might know) do you know if x3350 will work with 
OpenBSD, or it will not work due to

the raid controller not being supported just like with x3650?

Does anyone tried to install OpenBSD on IBM x3350 machines?

What about x3550 ?

Regards,
Marcos Laufer

Insan Praja SW escribis:

On Tue, 06 May 2008 11:23:46 +0700, Tomas Bodzar 
wrote:


Hi,

From HW view is more than enough this type :

http://www-03.ibm.com/systems/x/hardware/rack/x3250/index.html

but I don't know how much is HW from this server supported in OpenBSD.In
specifications are only Win systems,so best way is to ask IBM about
support
under their Unixes on this device (it tells something about possibility
to run
it on OpenBSD).Then you can compare it against HW list from OpenBSD.

It's for way - I NEED JUST IBM (due to company policy or something like
this)

Better (and lightest) way is purchase some from KD85.

Ofcourse,for pf is some old 1U with PIII >, 256 RAM > enough too.You can
get
one or two year warranty even on these "old" types.

TB

-Original Message-
From: owner-m...@openbsd.org [mailto:owner-m...@openbsd.org] On 
Behalf Of

LEVAI Daniel
Sent: Monday, May 05, 2008 3:09 PM
To: OpenBSD misc
Subject: 1U IBM or Dell server for firewall

Hi!

I'm in need of a 1U IBM (or Dell as a last resort) server for a firewall
in our office. To be honest, I'm not quite familiar with IBM servers of
these kind, but I'm sure that someone is using one already for a fw, so
I just need a model number or configuration which is working perfectly
with OpenBSD 4.3. It doesn't have to be a fancy configuration, it will
be just a simple firewall... If someone would be kind enough to
recommend me an already working and tested IBM server, I'd be very
happy and thankful :)

Thanks in advance:

Daniel

--
LIVAI Daniel
GPG key ID = 0x4AC0A4B1
Key fingerprint = D037 03B9 C12D D338 4412  2D83 1373 917A 4AC0 A4B1



An IBM x3250 looks like this on dmesg:
OpenBSD 4.3-current (GENERIC.MP) #0: Thu Mar 13 05:46:13 WIT 2008
 webad...@webservices01:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2145841152 (2046MB)
avail mem = 2072121344 (1976MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.33 @ 0x7fee2000 (29 entries)
bios0: vendor IBM version "IBM BIOS Version 1.35-[G9E135AUS-1.35]-" date
09/29/2  007
bios0: IBM IBM System x3250 -[436442A]-
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP MCFG APIC BOOT SPCR SSDT
acpi0: wakeup devices PEG_(S4) PEG2(S4) EXP1(S4) EXP5(S4) EXP6(S4)
PCIB(S4) COM1  (S4) COM2(S4)
USB1(S4) USB2(S4) USB3(S4) USB4(S4) EUSB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU 3040 @ 1.86GHz, 1866.96 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF 

LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX 


16,
xTPR,NXE,LONG
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: apic clock running at 266MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Xeon(R) CPU 3040 @ 1.86GHz, 1866.73 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF 

LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX 


16,
xTPR,NXE,LONG
cpu1: 2MB 64b/line 8-way L2 cache
ioapic0 at mainbus0 apid 2 pa 0xfec0, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 12 (PEG_)
acpiprt2 at acpi0: bus 6 (PEG2)
acpiprt3 at acpi0: bus 5 (EXP1)
acpiprt4 at acpi0: bus 1 (EXP5)
acpiprt5 at acpi0: bus 3 (EXP6)
acpiprt6 at acpi0: bus 26 (PCIB)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpibtn0 at acpi0: PWRB
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel E7230 Host" rev 0xc0
ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0xc0: apic 2 int 16
(irq 7)
pci1 at ppb0 bus 12
ppb1 at pci0 dev 3 function 0 "Intel 82975X PCIE" rev 0xc0: apic 2 int 16
(irq 7  )
pci2 at ppb1 bus 6
ppb2 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 2 int
17 (irq   10)
pci3 at ppb2 bus 5
ppb3 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01: apic 2 
int 17

(irq   10)
pci4 at ppb3 bus 1
bge0 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x21, BCM5750 C1
(0x4201):   apic 2 int 16 
(irq

7), address 00:1a:64:6e:a0:9a
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb4 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01: apic 2 
int 16

(irq   11)
pci5 at ppb4 bus 3
bge1 at pci5 dev 0 function 0 &quo

Re: OpenBSD hosting

[Marcos Laufer]

Dear Friedrich,

We offer dedicated servers at ipv4.net
If you are interested let me know

Regards,
Marcos Laufer

Francisco Valladolid Hdez. wrote:
> Hi
>
> Consider  www.geekisp.com I have a account with Dave for almost, three years 
> without problems.
>
> www.rootr.net can be a nice solution.
>
> Dedicated server, www.sprocketdata.com  or www.m5hosting.com
>
> Regards.
>
>
> --- On Sun, 2/22/09, Friedrich Locke  wrote:
>
>   
>> From: Friedrich Locke 
>> Subject: OpenBSD hosting
>> To: misc@openbsd.org
>> Date: Sunday, February 22, 2009, 9:54 PM
>> Dear gentleman,
>>
>> i am searching for web hosting service that :
>>
>> supports java,
>> support MySQL
>> allow me shell account access for software development with
>> access to MySQL.
>> allow ssh/sftp access.
>> and runs OpenBSD at least for the shell services.
>> allow me to host dns for my domain.
>>
>> Is anybody aware of a such hosting services...
>>
>> thank.

panic on GENERIC.MP 4.3

[Marcos Laufer]

Hello list,

I had a panic on a GENERIC.MP 4.3, here are the interesting lines in the 
dmesg and the full dmesg follows:


uvm_fault(0xd07d3c40, 0xde98b000, 0, 1) -> e
fatal page fault (6) in supervisor mode
trap type 6 code 0 eip d04852a2 cs 8 eflags 10247 cr2 de98b000 cpl 0
panic: trap type 6, code=0, pc=d04852a2
Starting stack trace...
panic(d0794370,0,de840aa0,0,d7650af4) at panic+0x71
panic(d06dd467,6,0,d04852a2,d0812f20) at panic+0x71
trap() at trap+0x11d
--- trap (number 6) ---
pmap_page_remove(d12d4800,0,de840b40,de840b30,d02032c9) at 
pmap_page_remove+0x66

uvn_flush(d7442388,0,0,0,0,14,1,0) at uvn_flush+0x192
uvn_detach(d7442388,0,0,de840c50,d71960ec) at uvn_detach+0x31
uvm_unmap_detach(d77350c0,0,0,0) at uvm_unmap_detach+0x62
uvm_unmap_p(d71960ec,0,cfbfe000,0,d02032c9) at uvm_unmap_p+0xa1
uvmspace_exec(d7650af4,0,cfbfe000,28b30,d7106ed0) at uvmspace_exec+0xa4
sys_execve(d7650af4,de840f68,de840f58,cfbf5470,1af) at sys_execve+0x433
syscall() at syscall+0x27e
--- syscall (number 59) ---
0x90981d1:
End of stack trace.
syncing disks... 33 32 15 1 done
rebooting...
OpenBSD 4.3 (GENERIC.MP) #587: Wed Mar 12 11:21:57 MDT 2008
   dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
RTC BIOS diagnostic error 80
cpu0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel" 
686-class) 2.39 GHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,S

SE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
real mem  = 1040449536 (992MB)
avail mem = 997896192 (951MB)
RTC BIOS diagnostic error 80
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/07/08, SMBIOS rev. 2.4 @ 
0xe2410 (33 entries)
bios0: vendor Intel Corp. version "JOQ3510J.86A.0942.2008.0807.1958" 
date 08/07/2008

bios0: Intel Corporation DQ35MP
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC WDDT MCFG ASF! DMAR ASPT WDTT SSDT SSDT 
SSDT SSDT SSDT TCPA
acpi0: wakeup devices SLPB(S4) P32_(S4) UAR1(S4) ILAN(S4) PEGP(S4) 
PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) PEX4(S4) PEX5(S4) UHC1(
S3) UHC2(S3) UHC3(S3) UHC4(S3) EHCI(S3) EHC2(S3) UH42(S3) UHC5(S3) 
UHC6(S3) AZAL(S3)

acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 267MHz
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel" 
686-class) 2.42 GHz
cpu1: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,S

SE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel" 
686-class) 2.42 GHz
cpu2: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,S

SE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel" 
686-class) 2.42 GHz
cpu3: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,S

SE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins
ioapic0: duplicate apic id, remapped to apid 4
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 6 (P32_)
acpiprt2 at acpi0: bus 1 (PEX0)
acpiprt3 at acpi0: bus 2 (PEX1)
acpiprt4 at acpi0: bus 3 (PEX2)
acpiprt5 at acpi0: bus 4 (PEX3)
acpiprt6 at acpi0: bus 5 (PEX4)
acpiprt7 at acpi0: bus -1 (PEX5)
acpicpu0 at acpi0: C1
acpicpu1 at acpi0: C1
acpicpu2 at acpi0: C1
acpicpu3 at acpi0: C1
acpibtn0 at acpi0: SLPB
bios0: ROM list: 0xc/0xb400! 0xcb800/0x2400!
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82Q35 Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82Q35 Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82Q35 HECI" rev 0x02 at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2 "Intel 82Q35 PT IDER" rev 0x02: DMA 
(unsupported), channel 0 wired to native-PCI, channel 1 w

ired to native-PCI
pciide0: using apic 4 int 18 (irq 9) for native-PCI interrupt
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
"Intel 82Q35 KT" rev 0x02 at pci0 dev 3 function 3 not configured
em0 at pci0 dev 25 function 0 "Intel ICH9 IGP AMT" rev 0x02: apic 4 int 
20 (irq 11), address 00:19:d1:b1:f2:0d
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 4 int 
18 (irq 9)
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 4 int 
21 (irq 9)
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02: apic 4 int 
17 (irq 10)
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 4 int 
17 (irq 10)

usb0 at ehci0: USB revision 2.0

Re: PHP5 And Apache on 4.4

[Marcos Laufer - Ipv4networks.com]

Or you could just enable short tags in php.ini:

short_open_tag = On


On Thu, Dec 11, 2008 at 08:14:14PM -0700, Bret wrote:
> Richard Toohey wrote:
> >[cut]
> >>
> >>Yes a clean install, Apache works fine,, index,html servers up across 
> >>my network... php -i from the command line works,,, a page called 
> >>qw.php with only   displays nothing but from firefox 
> >>a show page source shows the  as being there. also 
> >>did multiple reboots to make sure.
> >>
> >>Bret
> >
> >PHP 5, mate, you have got to use long tags
> >
> > >
> >phpinfo();
> >
> >?>
> >
> >
> >
> 
> Well just everybody PLEASE Laugh at me... No I mean Laugh with me... 
> Thats what I get for using an old learn Apache, MySQL and PHP book
> 
> Thanks and Yes I was LMAO ;-D
> 
> Bret

Re: ahci questions

[Marcos Laufer - Ipv4networks.com]

it's 10 times faster than ide , go for it.
also get the right hard drives, those must be sata2

On Fri, Dec 05, 2008 at 02:47:23PM +0100, frantisek holop wrote:
> hi there,
> 
> i was looking for some ahci info when i stumbled upon the intel site
> http://www.intel.com/technology/serialata/ahci.htm
> 
>   "Implementation of the Advanced Host Controller Interface
>   Specification requires a license from Intel."
> 
> does this mean based on their specs, or _any_ ahci implementation?
> also the specs are free to download (unlike SD specs IIRC)..
> 
> 
> ahci(4) says the driver emulates SCSI so i guess it is not based
> on these specs.  but it doesn't mention if it supports the ahci
> features that are supposed to be better than ide, e.g. hotswapping
> and power management -- so i guess it doesn't...
> 
> 
> my last question for people running ahci, is it better than
> ide in any perceivable way?
> 
> thanks,
> -f
> -- 
> oxymoron: mobil station.

redhat_base not found in packages

[Marcos Laufer]

Hello list,

I can't find redhat_base in the 4.4 packages .
Has it been discontinued?

Regards,
Marcos Laufer

Re: dmesg IBM x3650 OpenBSD 4.3

[Marcos Laufer]

Hi , i enabled the driver in the RAMDISK_CD and GENERIC, then made a
release, but it still doesn't recognize this hardware as configured.
Just for checking, i booted with this release cd and in the UKC prompt y 
tried
a 'find aac' and it shows as enabled.
Maybe this particular controller is not supported at all in the aac driver?

Regards,
Marcos Laufer

Jonathan Gray wrote:
> On Tue, Oct 07, 2008 at 06:26:23PM -0200, Marcos Laufer wrote:
>   
>> Hello, this is an IBM x3650, i booted with a 4.3 cd and this is the
>> dmesg (SAS hard disks are not recognized)
>>
>>
>> "Adaptec ASR-2120S" rev 0x02 at pci6 dev 0 function 0 not configured
>> 
>
> The driver for Adaptec RAID (aac) is disabled by default.
>
> See http://undeadly.org/cgi?action=article&sid=20050318231311
> for the backstory.  Adaptec won't provide documentation
> required to maintain the driver.

Re: RES: OpenBSD on IBM System X3550 7879

[Marcos Laufer - Ipv4networks.com]

It's the same problem i had with the IBM x3650:

"Adaptec ASR-2120S" rev 0x02 at pci11 dev 0 function 0 not configured


The driver is not enabled by default. 

I established conversation with Adaptec, and i will post all of it
soon.



On Thu, Oct 23, 2008 at 06:24:27PM -0200, Ricardo Augusto de Souza wrote:
> Finally here is the dmesg
> 
> 
> OpenBSD 4.3 (RAMDISK_CD) #645: Wed Mar 12 11:31:03 MDT 2008
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
> cpu0: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz ("GenuineIntel" 686-class) 2
> GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
> CF
> LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,C
> X16,xTPR
> real mem  = 3220541440 (3071MB)
> avail mem = 3122683904 (2978MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 02/08/08, BIOS32 rev. 0 @ 0xfd841,
> SMBIOS   rev. 2.4 @
> 0xbffcee80 (86 entries)
> bios0: vendor IBM version "-[GFE136BUS-1.09]-" date 02/08/2008
> bios0: IBM IBM System x3550 -[7978B1U]-
> acpi0 at bios0: rev 2, can't enable ACPI
> bios0: ROM list: 0xc/0xb000 0xcb000/0x1800 0xcc800/0x1800
> 0xce000/0x5000!
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 5000X Host" rev 0x31
> ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE x8" rev 0x31
> pci1 at ppb0 bus 16
> ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
> pci2 at ppb1 bus 17
> ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
> pci3 at ppb2 bus 19
> ppb3 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01
> pci4 at ppb3 bus 18
> ppb4 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
> pci5 at ppb4 bus 20
> ppb5 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x31
> pci6 at ppb5 bus 35
> ppb6 at pci0 dev 4 function 0 "Intel 5000 PCIE x8" rev 0x31
> pci7 at ppb6 bus 7
> ppb7 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x31
> pci8 at ppb7 bus 34
> ppb8 at pci0 dev 6 function 0 "Intel 5000 PCIE" rev 0x31
> pci9 at ppb8 bus 3
> ppb9 at pci9 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
> pci10 at ppb9 bus 4
> bnx0 at pci10 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 7
> ppb10 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x31
> pci11 at ppb10 bus 2
> "Adaptec ASR-2120S" rev 0x02 at pci11 dev 0 function 0 not configured
> "Intel 5000 DMA" rev 0x31 at pci0 dev 8 function 0 not configured
> pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0x31
> pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0x31
> pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0x31
> pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x31
> pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x31
> pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x31
> pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x31
> ppb11 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09
> pci12 at ppb11 bus 5
> ppb12 at pci12 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
> pci13 at ppb12 bus 6
> bnx1 at pci13 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 3
> uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: irq 5
> uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: irq 11
> uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: irq 5
> ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: irq 5
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb13 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xd9
> pci14 at ppb13 bus 1
> vga1 at pci14 dev 1 function 0 "ATI ES1000" rev 0x02
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> ichpcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09: PM
> disabled
> pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA,
> channel 0 c  onfigured to
> compatibility, channel 1 configured to compatibility
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0:  SCSI0
> 5/cdrom re  movable
> cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 ignored (disabled)
> "Intel 6321ESB SMBus" rev 0x09 at pci0 dev 31 function 3 not configured
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> bi

Re: dmesg IBM x3650 OpenBSD 4.3

[Marcos Laufer]

I'm pretty sure that my email won't change a thing about Adaptec's way
of thinking. But it is the right thing to do, i must send them that 
email with my
point of view and needs as a user of Adaptec's products.
I will also let IBM know about this.

Theo de Raadt wrote:
>> I am writing an email to Adaptec right now asking for the documentation
>> you need.
>> 
>
> Wow.  Good luck.  Can't you see we've been down that road before with
> those bastards?  But really.  Good luck.  You really are too optimistic,
> but sure, learn the reality for yourself.

Re: dmesg IBM x3650 OpenBSD 4.3

[Marcos Laufer]

Jonathan, thanks, i see.
I Tried enabling de aac driver in the GENERIC and RAMDISK_CD , and made
a release. It's still not showing it as enabled when booting with this 
new cd.
Could it be possible that the driver is another one?
I am writing an email to Adaptec right now asking for the documentation
you need.

Regards,
Marcos Laufer


Jonathan Gray wrote:
> On Tue, Oct 07, 2008 at 06:26:23PM -0200, Marcos Laufer wrote:
>   
>> Hello, this is an IBM x3650, i booted with a 4.3 cd and this is the
>> dmesg (SAS hard disks are not recognized)
>>
>>
>> "Adaptec ASR-2120S" rev 0x02 at pci6 dev 0 function 0 not configured
>> 
>
> The driver for Adaptec RAID (aac) is disabled by default.
>
> See http://undeadly.org/cgi?action=article&sid=20050318231311
> for the backstory.  Adaptec won't provide documentation
> required to maintain the driver.

dmesg IBM x3650 OpenBSD 4.3

[Marcos Laufer]

Hello, this is an IBM x3650, i booted with a 4.3 cd and this is the
dmesg (SAS hard disks are not recognized)


OpenBSD 4.3 (RAMDISK_CD) #645: Wed Mar 12 11:31:03 MDT 2008
   [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Xeon(TM) MV CPU 3.20GHz ("GenuineIntel" 686-class) 3.20 GHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,CNXT-ID,CX16,xTPR
real mem  = 1073074176 (1023MB)
avail mem = 1031426048 (983MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 10/27/06, BIOS32 rev. 0 @ 0xfd831, SMBIOS 
rev. 2.4 @ 0x3ffcea40 (116 entries)
bios0: vendor IBM version "-[GGE123AUS-1.03]-" date 10/27/2006
bios0: IBM IBM System x3650 -[7979H5U]-
acpi0 at bios0: rev 2, can't enable ACPI
bios0: ROM list: 0xc/0xb000 0xcb000/0x1800 0xcc800/0x1800 0xce000/0x5000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 5000P Host" rev 0x92
ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0x92
pci1 at ppb0 bus 26
ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci2 at ppb1 bus 27
ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci3 at ppb2 bus 28
ppb3 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01
pci4 at ppb3 bus 36
ppb4 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
pci5 at ppb4 bus 37
ppb5 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x92
pci6 at ppb5 bus 4
"Adaptec ASR-2120S" rev 0x02 at pci6 dev 0 function 0 not configured
ppb6 at pci0 dev 4 function 0 "Intel 5000 PCIE x8" rev 0x92
pci7 at ppb6 bus 16
ppb7 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x92
pci8 at ppb7 bus 69
ppb8 at pci0 dev 6 function 0 "Intel 5000 PCIE x8" rev 0x92
pci9 at ppb8 bus 7
ppb9 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x92
pci10 at ppb9 bus 68
"Intel 5000 DMA" rev 0x92 at pci0 dev 8 function 0 not configured
pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0x92
pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0x92
pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0x92
pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x92
pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x92
pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x92
pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x92
ppb10 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09
pci11 at ppb10 bus 2
ppb11 at pci11 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc2
pci12 at ppb11 bus 3
bnx0 at pci12 dev 0 function 0 "Broadcom BCM5708" rev 0x11: irq 3
ppb12 at pci0 dev 28 function 1 "Intel 6321ESB PCIE" rev 0x09
pci13 at ppb12 bus 5
ppb13 at pci13 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc2
pci14 at ppb13 bus 6
bnx1 at pci14 dev 0 function 0 "Broadcom BCM5708" rev 0x11: irq 10
uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: irq 5
uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: irq 5
uhci3 at pci0 dev 29 function 3 "Intel 6321ESB USB" rev 0x09: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: irq 5
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb14 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xd9
pci15 at ppb14 bus 1
vga1 at pci15 dev 6 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 6321ESB SATA" rev 0x09: DMA, channel 0 
wired to compatibility, channel 1 wired to compatibility
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0:  SCSI0 5/cdrom 
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"Intel 6321ESB SMBus" rev 0x09 at pci0 dev 31 function 3 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask fbe5 netmask ffed ttymask ffef
rd0: fixed, 3800 blocks
umass0 at uhub0 port 7 configuration 1 interface 0 "Kingston DataTraveler U3" 
rev 2.00/2.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0:  SCSI0 0/direct 
removable
sd0: 994MB, 126 cyl, 255 head, 63 sec, 512 bytes/sec, 2037759 sec total
cd1 at scsi

mssql.so

[Marcos Laufer]

Well , php5-sybase_ct does not enable the same functions, for instance
the mysql_init() function is not there. That function would allow you to
use stored procedures from the ms db .
Does anyone know how to generate a mssql.so with this functions included?

Regards,
Marcos Laufer


--

List:   openbsd-misc
Subject:Re: mssql.so
From:   joshua stein 
Date:   2006-01-15 4:14:06
Message-ID: 20060115041405.GD15440 () jcs ! org
[Download message RAW]

> I've read the freetds.org help but I can't figure out what to do!!!
> Someone can help me?!

the php5-sybase_ct-5.0.4.tgz package will give you sybase_ct.so,
which enables the same mssql_* functions as mssql.so.

[prev in list] [next in list] [prev in thread] [next in thread]

pre-arranged order

[Marcos Laufer]

Hello i've put this order through the OpenBSD website:

Your order currently is:
-> 1 [T29] The OpenBSD 4.3 Blowfish Shirt (M) @ CDN $25.00
-> 1 [T21] Redundancy Must Be Free Shirt (L) @ CDN $25.00
-> 1 [T11] The Blue Polo Shirt (M) @ CDN $40.00
-> 1 [T23] Wireframe Blowfish Shirt (M) @ CDN $20.00
-> 1 [T28] The Because Security Matters Shirt (M) @ CDN $25.00
-> 1 [CD43] OpenBSD 4.3 CD @ CDN $50.00
-> 1 [T19] Puff The Barbarian Shirt (L) @ CDN $25.00
-> Total: CDN $210.00 + Shipping.


Please let me know how much is it with shipping included, i will send payment
via
paypal with my paypal account.
Regards,

Marcos Laufer - IPversion4.com
* [EMAIL PROTECTED]
 http://www.ipversion4.com
( 0800-444-HOSTING
Rodriguez Peqa 468 1 C

Re: Zend Optimizer with apache and php5 on 4.2

[Marcos Laufer]

Hello Evgeniy,

You can try this how-to, this might work for you:

Solution for ZendOptimizer to work under OpenBSD 4.1/i386
1. Download the file for OpenBSD 3.x as distributed by Zend
currently ZendOptimizer-3.2.8-openbsd3.4-i386.tar.gz

2. Untar (tar -xzf ZendOpt*), and fetch the files
-> ZendOptimizer*/data/ZendExtensionManager.so
-> ZendOptimizer*/data/5_1_x_comp/ZendOptimizer.so
where 5_1_x is the php you have installed

3. Put those file somewhere clean like
-> /var/www/lib/php/ZendExtensionManager.so
-> /var/www/lib/php/ZendOptimizer.so
you NEED to keep the names unchanged

4. Simulate old libs (here's the magic)
type in the console the following command
# ln -s libm.so.2.3 /usr/lib/libm.so.1.0

Alternatively, if you don't like symlinking you can edit the binaries and 
change the
string 'libm.so.1.0' into 'libm.so.2.3' in both of Zend*.so files
- change 0x[31 2E 30] -> 0x[32 2E 33] in ZendExtensionManager.so at offset 
0x0720
- change 0x[31 2E 30] -> 0x[32 2E 33] in ZendOptimizer.so at offset 0xCEAE

5. Edit your /var/www/conf/php.ini and add the section
[Zend]
zend_extension=/var/www/lib/php/ZendExtensionManager.so
zend_extension=/var/www/lib/php/ZendOptimizer.so

6. Test
Reboot your webserver
# apachectl stop
# apachectl start
Write down one php page containing  and browse it !



- Original Message - 
From: "Evgeniy Sudyr" <[EMAIL PROTECTED]>
To: 
Sent: Monday, January 14, 2008 9:25 AM
Subject: Zend Optimizer with apache and php5 on 4.2


Hi all,

I want use Zend optimizer with apache and php5.

I downloaded  ZendOptimizer-3.3.0a-openbsd3.4-i386.tar.gz from Zend
website (latest version is only for 3.4) and unpacked archive and copied PHP 
module from
/data/5_2_x_comp/ZendOptimizer.so to /var/www/lib/ZendOptimizer.so

I put lines below to php.ini

;zend_optimizer.optimization_level=15
zend_extension="/var/www/lib/ZendOptimizer.so"

Module not loading :(


# php -v
Failed loading /var/www/lib/ZendOptimizer.so:  Cannot load specified object
PHP 5.2.3 with Suhosin-Patch 0.9.6.2 (cli) (built: Aug 16 2007 02:21:38)
Copyright (c) 1997-2007 The PHP Group
Zend Engine v2.2.0, Copyright (c) 1998-2007 Zend Technologies


Is it possible run Zend optimizer with -current or 4.2 ? Please give a
bit instructions how make it workable.




-- 
Best regards,
 Evgeniy  mailto:[EMAIL PROTECTED]

Re: Intel DQ35MP

[Marcos Laufer]

Here is the output from the Intel DQ35MP:

boot> machine memory
Region 0: type 1 at 0x1000 for 630KB
Region 1: type 2 at 0x9e800 for 6kb
Region 2: type 2 at 0xe for 128KB
Region 3: type 1 at 0x10 for 998016KB
Region 4: type 4 at 0x3cfa for 772KB
Region 5: type 1 at 0x3d061000 for 16800KB
Region 6: type 2 at 0x3e0c9000 for 8KB
Region 7: type 1 at 0x3e0cb000 for 688KB
Region 8: type 4 at 0x3e177000 for 348KB
Region 9: type 1 at 0x3e1ce000 for 64KB
Region 10: type 4 at 0x3e1de000 for 28KB
Region 11: type 1 at 0x3e1e5000 for 12KB
Region 12: type 3 at 0x3e1e8000 for 44KB
Region 13: type 1 at 0x3e1f3000 for 4KB
Region 14: type 3 at 0x3e1f4000 for 44KB
Region 15: type 1 at 0x3e1ff000 for 4KB
Region 16: type 2 at 0x3e20 for 3072KB
Region 17: type 2 at 0x3e50 for 1024kb
Region 18: type 2 at 0x3e60 for 10240KB
Region 19: type 2 at 0xf000 for 131072KB
Region 20: type 2 at 0xffc0 for 4096KB
Low ram: 634KB High ram: 1015580KB
Total free memory: 1016218KB


Atentamente, Marcos Laufer Marcos Laufer - IPversion4.com * [EMAIL PROTECTED]
http://www.ipversion4.com ( 0800-444-HOSTING Rodriguez Peqa 468 1 C
- Original Message - 
From: <[EMAIL PROTECTED]>
To: "rivo nurges" <[EMAIL PROTECTED]>
Cc: 
Sent: Thursday, January 10, 2008 9:17 PM
Subject: Re: Intel DQ35MP


In gmane.os.openbsd.misc, you wrote:
>
>  I had same problem with DQ965GF, DSDT was overwritten by msgbuf.
>  As a quick hack I changed msgbuf size and it solved my problem. I
>  haven't had time to debug it further.
>
>  Index: sys/arch/i386/include/param.h
>  ===
>  RCS file: /OpenBSD/src/sys/arch/i386/include/param.h,v
>  retrieving revision 1.42
>  diff -u -3 -p -r1.42 param.h
>  --- sys/arch/i386/include/param.h   1 Oct 2007 12:10:55 -   1.42
>  +++ sys/arch/i386/include/param.h   10 Jan 2008 19:13:18 -
>  @@ -97,7 +97,7 @@
>   #defineUSPACE_ALIGN(0) /* u-area alignment 0-none */
>
>   #ifndef MSGBUFSIZE
>  -#define MSGBUFSIZE 4*NBPG  /* default message buffer size */
>  +#define MSGBUFSIZE 2*NBPG  /* default message buffer size */
>   #endif

Please send me the output of 'machine memory' at the boot prompt
for this machine.  I think I know what is causing this...

-Toby.
-- 
 [100~Plax]sb16i0A2172656B63616820636420726568746F6E61207473754A[dZ1!=b]salax

Re: Intel DQ35MP

[Marcos Laufer]

Hello , i tried updating the BIOS to the newest one, removed one ram stick,  
installed
latest snapshot and also tried disabling APM as you adviced me.
When booting with bsd it doesn't recognize the devices just like before.
Now i also tried booting with bsd.mp instead of bsd , and i get this error:


OpenBSD 4.2-current (GENERIC.MP) #539: Tue Jan 8 17:20:15 MST 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
RTC BIOS diagnostic error 80
cpu0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel" 686-class) 
2.39 GHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
 H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16, 
xTPR
real mem = 1040625664 (992mb)
avail mem = 998227968 (951mb)
RTC BIOS diagnostic error 80
mainbus0 at root
bios0 at mainbus0: at/286+ BIOS, date 12/10/07, SMBIOS rev. 2.4 @ 0xe2440 (31 
entries)
bios0: vendor Intel Corp. version "JOQ3510J.86A.0731.2007.1210.2204" date 
12/10/2007
bios0: Intel Corporation DQ35MP
acpi0 at bios0: rev 0panic: malloc: allocation too large
Stopped atDebugger+0x4:  leave
Debugger(e3ff000,0,d0916b48,2,3ff7) at Debugger+0x4
panic(d06b38ce,d0916b64,1000,d07b0a20,) at panic+0x63
malloc(f000ff5b,2,1,d0680060) at malloc+0x76
acpi_load_table(0,f000ff53,d19cce3c,de3fe000,d19c1f80) at acpi_load_table+0x19
acpi_loadtables(d19cce00,de3fd020,5,e) at acpi_loadtables+0x95
acpi_attach(d19cbf80,d19cce00,d0916d50,d19cbf80,0) at acpi_attach+0xb2
config_attach(d19cbf80,d078b980,d0916d50,d0604eb4) at config_attach+0xfd
biosattach(d19cbfc0,d19cbf80,d0916e80,d19cbfc0,d02032c9) at biosattach+0x34e
config_attach(d19cbfc0,d078ab70,d0916e80,d04a6504,d06d6958) at 
config_attach+0xfd
mainbus_attach(0,d19cbfc0,0,de3f7000,d0915334) at mainbus_attach+0x3d
RUN AT LEAST ...

Regards,
Marcos

- Original Message - 
From: "Pierre Riteau" <[EMAIL PROTECTED]>
To: "Marcos Laufer" <[EMAIL PROTECTED]>
Cc: 
Sent: Thursday, December 13, 2007 8:55 PM
Subject: Re: Intel DQ35MP


On Dec 13, 2007 9:25 PM, Marcos Laufer <[EMAIL PROTECTED]> wrote:
> Hello,
>
> I've just installed OpenBSD current on an Intel DQ35MP motherboard with a Quad
> processor, this is the
> dmesg log. Some devices are not recognized (PCI slot, ethernet, etc)

boot -c to go in UKC or config -ef /bsd and use 'disable apm'
to get acpi to attach. Maybe it will help.
Also, you can get a newer snapshot.

>
> OpenBSD 4.2-current (GENERIC) #558: Tue Nov 20 10:36:15 MST 2007
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> RTC BIOS diagnostic error 80
> cpu0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel" 686-class)
> 2.39 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
> H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
> xTPR
> real mem  = 2097643520 (2000MB)
> avail mem = 2020409344 (1926MB)
> RTC BIOS diagnostic error 80
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 07/26/07, SMBIOS rev. 2.4 @ 0xe2460 (30
> entries)
> bios0: vendor Intel Corp. version "JOQ3510J.86A.0559.2007.0726.0425" date
> 07/26/2007
> bios0: Intel Corporation DQ35MP
> apm0 at bios0: Power Management spec V1.2
> apm0: battery life expectancy 0%
> apm0: AC off, battery charge unknown, estimated 0:00 hours
> pcibios at bios0 function 0x1a not configured
> bios0: ROM list: 0xc/0xb400! 0xcb800/0x1e00! 0xcd800/0x1000
> 0xce800/0x1000
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x29b0 rev
> 0x02
> vga1 at pci0 dev 2 function 0 vendor "Intel", unknown product 0x29b2 rev 0x02:
> aperture at 0x9020, size 0x800
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> vendor "Intel", unknown product 0x29b4 (class communications subclass
> miscellaneous, rev 0x02) at pci0 dev 3 function 0 not configured
> pciide0 at pci0 dev 3 function 2 vendor "Intel", unknown product 0x29b6 rev
> 0x02: DMA (unsupported), channel 0 wired to native-PCI, channel 1 wired to
> native-PCI
> pciide0: using irq 9 for native-PCI interrupt
> pciide0: channel 0 ignored (not responding; disabled or no drives?)
> pciide0: channel 1 ignored (not responding; disabled or no drives?)
> vendor "Intel", unknown product 0x29b7 (class communications subclass serial,
> rev 0x02) at pci0 dev 3 function 3 not configured
> "Intel ICH9 IGP AMT" rev 0x02 at pci0 dev 25 function 0 not configured
> uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: irq 9
> uhci1 at pci0 dev 26 function 1 "In

Re: Intel DQ35MP

[Marcos Laufer]

I think the newest install42.iso is also wrong.
I open the .iso and the files inside have old dates (november 20 2007, and 
november 13
2007)
I'll make my own .iso with the rest of the files from the i386 snapshot 
directory

Regards,

- Original Message - 
From: "Marcos Laufer" <[EMAIL PROTECTED]>
To: "Jason George" <[EMAIL PROTECTED]>; 
Sent: Friday, December 14, 2007 3:39 PM
Subject: Re: Intel DQ35MP


I'm sure i installed the install42.iso from december 6th , maybe there was 
something wrong
on that image?
I'll try burning the newest one

Thanks!


- Original Message - 
From: "Jason George" <[EMAIL PROTECTED]>
To: 
Sent: Thursday, December 13, 2007 8:42 PM
Subject: Re: Intel DQ35MP


>Hello,
>
>I've just installed OpenBSD current on an Intel DQ35MP motherboard with a Quad
>processor, this is the
>dmesg log. Some devices are not recognized (PCI slot, ethernet, etc)
>
>OpenBSD 4.2-current (GENERIC) #558: Tue Nov 20 10:36:15 MST 2007
>[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC


That isn't a current -CURRENT snapshot.  A lot has been changed in the 3+
weeks since that snapshot was released into the wild.

Re: Intel DQ35MP

[Marcos Laufer]

I'm sure i installed the install42.iso from december 6th , maybe there was 
something wrong
on that image?
I'll try burning the newest one

Thanks!


- Original Message - 
From: "Jason George" <[EMAIL PROTECTED]>
To: 
Sent: Thursday, December 13, 2007 8:42 PM
Subject: Re: Intel DQ35MP


>Hello,
>
>I've just installed OpenBSD current on an Intel DQ35MP motherboard with a Quad
>processor, this is the
>dmesg log. Some devices are not recognized (PCI slot, ethernet, etc)
>
>OpenBSD 4.2-current (GENERIC) #558: Tue Nov 20 10:36:15 MST 2007
>[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC


That isn't a current -CURRENT snapshot.  A lot has been changed in the 3+
weeks since that snapshot was released into the wild.

Intel DQ35MP

[Marcos Laufer]

uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: 
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask fffd netmask fffd ttymask 
mtrr: Pentium Pro MTRR support
uhidev0 at uhub7 port 1 configuration 1 interface 0 "vendor 0x13ba Generic USB
K/B" rev 1.10/0.01 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub7 port 1 configuration 1 interface 1 "vendor 0x13ba Generic USB
K/B" rev 1.10/0.01 addr 2
uhidev1: iclass 3/1, 2 report ids
ums0 at uhidev1 reportid 1: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a swap on sd0b dump on sd0b
umass0 at uhub0 port 5 configuration 1 interface 0 "USB Audio Player" rev
2.00/0.02 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd1 at scsibus1 targ 1 lun 0: <, Audio Player, \\001> SCSI0 0/direct
removable
sd1: 968MB, 123 cyl, 255 head, 63 sec, 512 bytes/sec, 1984000 sec total

Regards,

Marcos Laufer

Re: no 4.2-stable package updates??

[Marcos Laufer]

My opinion is that more money should be raised in order to
keep -stable up to date.
I think it's important to mantain a stable distribution, it's one
of the things that give openbsd it's fame of being solid rock

Marcos

- Original Message - 
From: "Antoine Jacoutot" <[EMAIL PROTECTED]>
To: "Martin Schrvder" <[EMAIL PROTECTED]>
Cc: "Misc-Openbsd Listserv" 
Sent: Tuesday, December 11, 2007 1:09 PM
Subject: Re: no 4.2-stable package updates??


On Tue, 11 Dec 2007, Martin Schrvder wrote:
> Get -stable ports fixed?

Lack of interest/man power.

-- 
Antoine

php5-pear not found

[Marcos Laufer]

Hello list ,

I can see that the php5-pear package is missing in 4.2. How is it supposed to
be installed now?

Thanks!
Marcos

Re: OpenBSD is loosing cd and tshirt sales

[Marcos Laufer]

I want to place an order but i need to pay with paypal. In order
to pay with paypal i need to get in touch with someone at the
Cshop . This are sales OpenBSD is missing, i know a few other people who
also would buy cd's and t-shirts if they could pay with their paypal accounts

- Original Message - 
From: "L. V. Lammert" <[EMAIL PROTECTED]>
To: "Marcos Laufer" <[EMAIL PROTECTED]>
Cc: "OpenBSD Orders" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>;

Sent: Wednesday, October 10, 2007 11:37 AM
Subject: Re: OpenBSD is loosing cd and tshirt sales


On Wed, 10 Oct 2007, Marcos Laufer wrote:

> The OpenBSD project is loosing sales. I am trying to buy some
> tshirts and the 4.2 prerelease but nobody answers my emails at the
> Calgary shop.
>
If you had placed an order instead of complaining about it, you would have
your gear already, like the rest of us. Our 4.2 was actually received the
same day as the order confirmation - talk about efficiency!

Lee

OpenBSD is loosing cd and tshirt sales

[Marcos Laufer]

The OpenBSD project is loosing sales. I am trying to buy some
tshirts and the 4.2 prerelease but nobody answers my emails at the
Calgary shop.
Please i need someone at the Cshop reply to my emails ASAP.
I am trying to buy the OpenBSD CD for over six months now.
Noone answered my emails when 4.1 was released, and now i do not want
to miss 4.2 . I also want to buy some tshirts.
Please someone at the Cshop reply please. Openbsd Project is loosing money
by not selling CDs that could and should be sold to people who are willing
to buy them.
I am copying to misc@ also in order to get a faster response, maybe someone
can assist the people at the Cshop so they can sell properly.
Or maybe someone else should be in charge of selling internationally.

Thanks
Marcos

- Original Message - 
From: "Marcos Laufer" <[EMAIL PROTECTED]>
To: "OpenBSD Orders" <[EMAIL PROTECTED]>
Sent: Wednesday, September 26, 2007 11:32 PM
Subject: Fw: openbsd order



Josiah,

I never got a response, but yes please i want to place an order, i thought
that you weren't responding because you were unable to send to Argentina,
 but if you can , i want to preorder 4.2 cd and the Number 23 t-shirt (wire
frame puffy) , and the The Sushi Fugu Shirt , both on medium size,
how much would it be? I want to pay with paypal.

Thanks !
Marcos Laufer



- Original Message - 
From: "OpenBSD Orders" <[EMAIL PROTECTED]>
To: "Marcos Laufer" <[EMAIL PROTECTED]>
Sent: Thursday, September 13, 2007 7:37 PM
Subject: Re: openbsd order


Hello Marcos,

 We are going through some old emails and I found your message below. Did
you ever get a response?

If you are still interested in the items, please email:
[EMAIL PROTECTED]

Thanks!

Josiah J.
OpenBSD Shipping Department

On Tue, 13 Mar 2007, Marcos Laufer wrote:

> Hi there,
>
> I'd like to buy the pre-order of OpenBSD 4.1 and the Number 23 T-Shirt.
> Please inform me of the full cost with shipment to Argentina .
> I also would like to pay with PayPal
>
> Regards,
> Marcos Laufer
>
>
> Marcos Laufer - IPversion4.com
> * [EMAIL PROTECTED]
>  http://www.ipversion4.com
> ( 0800-444-HOSTING
> Rodriguez Peqa 468 1 C

disks not recognized as sata2

[Marcos Laufer]

Hello list,

I installed the latest snapshot on an Intel D945GCcr mobo
which supports SATA-300 (sata2) , plugged in some hard
disks, all of them Western Digital WD3200AAKS,
wich according to WD website those work at 300 mb/s.
(http://www.westerndigital.com/sp/products/products.asp?driveid=299&language
=en)
but OpenBSD doesn't seem to recognize them with the
AHCI driver , and they are recognized as UDMA5 instead.
I'd like to enable full speed on this disks, any tips?

Here i paste a full dmesg :

OpenBSD 4.2 (GENERIC) #373: Tue Aug 21 10:36:43 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
RTC BIOS diagnostic error 80
cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLU
SH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CNXT-ID
,CX16,xTPR
real mem  = 2136190976 (2037MB)
avail mem = 2057965568 (1962MB)
RTC BIOS diagnostic error 80
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/12/06, SMBIOS rev. 2.4 @ 0xe44b0
(29 entries)
bios0: vendor Intel Corp. version "CR94510J.86A.0031.2006.1212.1648" date
12/12/2006
bios0: Intel Corporation D945GCCR
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown, estimated 0:00 hours
apm0: flags 30102 dobusy 0 doidle 1
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xc/0xae00!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GP" rev 0x02: rng active,
800Kb/sec
vga1 at pci0 dev 2 function 0 "Intel 82945G Video" rev 0x02: aperture at
0x8000, size 0x1000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01
pci3 at ppb2 bus 3
ppb3 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
pci4 at ppb3 bus 4
fxp0 at pci4 dev 8 function 0 "Intel PRO/100 VM" rev 0x01, i82562: irq 9,
address 00:19:d1:52:40:58
ukphy0 at fxp0 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI
0x00aa00, model 0x0031
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0:  SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 11 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: 
wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
wd1 at pciide1 channel 0 drive 1: 
wd1: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 5
wd2 at pciide1 channel 1 drive 0: 
wd2: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
wd3 at pciide1 channel 1 drive 1: 
wd3: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
wd2(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
wd3(pciide1:1:1): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: irq 11
iic0 at ichiic0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: 
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask edfd netmask effd ttymask 
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
dkcsum: wd2 matches BIOS drive 0x82
dkcsum: wd3 matches BIOS drive 0x83
root on wd0a swap on wd0b dump on wd0b

Regards,
Marcos

Re: fsck Segmentation fault on 4.1

[Marcos Laufer]

So the patch works, and this problem seems serious and easy to encounter, i
vote for moving it to stable.

- Original Message - 
From: "Tobias Ulmer" <[EMAIL PROTECTED]>
To: "Otto Moerbeek" <[EMAIL PROTECTED]>
Cc: 
Sent: Friday, August 03, 2007 3:37 PM
Subject: Re: fsck Segmentation fault on 4.1


On Thu, Jul 19, 2007 at 08:09:58PM +0200, Otto Moerbeek wrote:
> [...]
>
> I misdiagnosed the problem. In the meantime I got another report with
> a dd of the partition which enabled me to diagnose the problem and
> make a fix for 4.1. Please test and report back. I'll be on vacation
> from Saturday, so it would be nice if you can answer before that.
>
> Anobody else seeing INCONSISTENT CGSIZE messages should try this as well.
>
> NOTE: this diff only applies to 4.1. Current does not have the
> problem, due to a corrected CGSIZE macro.
>
> -Otto
>
> Index: setup.c
> ===
> RCS file: /cvs/src/sbin/fsck_ffs/setup.c,v
> retrieving revision 1.29
> diff -u -p -r1.29 setup.c
> --- setup.c 16 Feb 2007 08:34:29 - 1.29
> +++ setup.c 19 Jul 2007 18:02:36 -
> @@ -336,6 +336,7 @@ setup(char *dev)
>  sbdirty();
>  dirty(&asblk);
>  }
> +#if 0
>  if (sblock.fs_cgsize != fragroundup(&sblock, CGSIZE(&sblock))) {
>  pwarn("INCONSISTENT CGSIZE=%d\n", sblock.fs_cgsize);
>  sblock.fs_cgsize = fragroundup(&sblock, CGSIZE(&sblock));
> @@ -346,6 +347,7 @@ setup(char *dev)
>  dirty(&asblk);
>  }
>  }
> +#endif
>  if (INOPB(&sblock) != sblock.fs_bsize / sizeof(struct ufs1_dinode)) {
>  pwarn("INCONSISTENT INOPB=%d\n", INOPB(&sblock));
>  sblock.fs_inopb = sblock.fs_bsize / sizeof(struct ufs1_dinode);
>
>

I had a power failure here (power company was doing maintenance and
repeatedly switched power off and on...)

Both my 4.1 boxen ran into this. The patch fixed the BLK 64 issues, but
i have a partition made with a larger blocksize (defaults * 2), that
couldn't be fixed (BLK 128). bsd.rd from snapshots did the trick... Just FYI

Tobias

Re: fsck Segmentation fault on 4.1

[Marcos Laufer]

Otto , i couldn't apply the patch , i get some errors:

patch -p0 < patch1.txt
Hmm...  Looks like a unified diff to me...
The text leading up to this was:
--
|Index: setup.c
|===
|RCS file: /cvs/src/sbin/fsck_ffs/setup.c,v
|retrieving revision 1.29
|diff -u -p -r1.29 setup.c
|--- setup.c 16 Feb 2007 08:34:29 - 1.29
|+++ setup.c 19 Jul 2007 18:02:36 -
--
Patching file setup.c using Plan A...
Hunk #1 failed at 336.
Hunk #2 failed at 347.
2 out of 2 hunks failed--saving rejects to setup.c.rej
Hmm...  Ignoring the trailing garbage.
done

---

But i added the 2 lines (if and endif) manually in setup.c, so the code
looks like this:

sbdirty();
dirty(&asblk);
}
#if 0
if (sblock.fs_cgsize != fragroundup(&sblock, CGSIZE(&sblock))) {
pwarn("INCONSISTENT CGSIZE=%d\n", sblock.fs_cgsize);
sblock.fs_cgsize = fragroundup(&sblock, CGSIZE(&sblock));
if (preen)
printf(" (FIXED)\n");
if (preen || reply("FIX") == 1) {
sbdirty();
dirty(&asblk);
}
}
#endif
if (INOPB(&sblock) != sblock.fs_bsize / sizeof(struct ufs1_dinode))
{
pwarn("INCONSISTENT INOPB=%d\n", INOPB(&sblock));
sblock.fs_inopb = sblock.fs_bsize / sizeof(struct
ufs1_dinode);

--

Will this work?


Regards,
Marcos

----- Original Message - 
From: "Otto Moerbeek" <[EMAIL PROTECTED]>
To: "Marcos Laufer" <[EMAIL PROTECTED]>
Cc: 
Sent: Friday, July 20, 2007 4:02 PM
Subject: Re: fsck Segmentation fault on 4.1


On Fri, 20 Jul 2007, Marcos Laufer wrote:

> Will this be moved to -stable, or is it an uncommon thing ?

It's not very common, but the impact is pretty high. So once some more
test reports are coming in, we'll consider it.

-Otto

>
> - Original Message - 
> From: "Otto Moerbeek" <[EMAIL PROTECTED]>
> To: "Marcos Laufer" <[EMAIL PROTECTED]>
> Cc: 
> Sent: Thursday, July 19, 2007 3:09 PM
> Subject: Re: fsck Segmentation fault on 4.1
>
>
> On Fri, 13 Jul 2007, Otto Moerbeek wrote:
>
> > On Fri, 13 Jul 2007, Marcos Laufer wrote:
> >
> > > Otto ,
> > >
> > > This is the error i get:

Re: fsck Segmentation fault on 4.1

[Marcos Laufer]

Well it seems that more people are having this same error , i found this guy
in
Brazil who hasn't reported it but mentioned it in a forum
http://www.bsdforums.org/forums/showthread.php?p=265260
read at the end.
I think it would be a good idea to put the patch in the stable branch

Regards,
Marcos

- Original Message - 
From: "Otto Moerbeek" <[EMAIL PROTECTED]>
To: "Marcos Laufer" <[EMAIL PROTECTED]>
Cc: 
Sent: Friday, July 20, 2007 4:02 PM
Subject: Re: fsck Segmentation fault on 4.1


On Fri, 20 Jul 2007, Marcos Laufer wrote:

> Will this be moved to -stable, or is it an uncommon thing ?

It's not very common, but the impact is pretty high. So once some more
test reports are coming in, we'll consider it.

-Otto

>
> - Original Message ----- 
> From: "Otto Moerbeek" <[EMAIL PROTECTED]>
> To: "Marcos Laufer" <[EMAIL PROTECTED]>
> Cc: 
> Sent: Thursday, July 19, 2007 3:09 PM
> Subject: Re: fsck Segmentation fault on 4.1
>
>
> On Fri, 13 Jul 2007, Otto Moerbeek wrote:
>
> > On Fri, 13 Jul 2007, Marcos Laufer wrote:
> >
> > > Otto ,
> > >
> > > This is the error i get:
> > > It starts booting , and it starts fsck , it fails with /dev/rwd0e and
rwd0h,
> > >
> > > (i could see once that when it finished it says:)
> > > fsck_ffs in free():  error: free_page: pointer to wrong page
> > > fsck: /dev/rwd0h: Abort trap
> > >
> > > I reboot it again many times and that did not show again
> > >
> > >
> > > i try to fsck manually like this as you say and i get:
> > >
> > > # ulimit -d unlimited
> > > # fsck -y /dev/rwd0e
> > >
> > > INCONSISTENT CGSIZE=16384
> > >
> > > FIX? yes
> > >
> > > * * Last mounted on /usr
> > > * * Phase 1- Check Blocks and Sizes
> > > * * Phase 2 - Check pathnames
> > > * * Phase 3 - Check Conectivity
> > > * * Phase 4 - Check Reference Counts
> > > * * Phase 5 - Check Cyl Groups
> > >
> > > CANNOT READ: BLK 64
> > >
> > > CONTINUE? yes
> > >
> > > fsck: /dev/rwd0e: Segmentation Fault
> >
> > This is not an out of memory situation.
> >
> > It looks like fsck_ffs has problems getting data from your disk,
> > probably because of hardware failure or bad cabling.  Sometimes it
> > detects it cannot read the data (the CANNOT READ: BLK 64 case), but it
> > is possible it gets corrupted data in other cases.
> >
> > Sadly, this can cause fsck_ffs to do the wrong thing and access wrong
> > memory and corrupt it's internal data. During the last year I've fixed
> > some stuff in this area, but there still remains cases that can go
> > wrong.
>
> I misdiagnosed the problem. In the meantime I got another report with
> a dd of the partition which enabled me to diagnose the problem and
> make a fix for 4.1. Please test and report back. I'll be on vacation
> from Saturday, so it would be nice if you can answer before that.
>
> Anobody else seeing INCONSISTENT CGSIZE messages should try this as well.
>
> NOTE: this diff only applies to 4.1. Current does not have the
> problem, due to a corrected CGSIZE macro.
>
> -Otto
>
> Index: setup.c
> ===
> RCS file: /cvs/src/sbin/fsck_ffs/setup.c,v
> retrieving revision 1.29
> diff -u -p -r1.29 setup.c
> --- setup.c 16 Feb 2007 08:34:29 - 1.29
> +++ setup.c 19 Jul 2007 18:02:36 -
> @@ -336,6 +336,7 @@ setup(char *dev)
>   sbdirty();
>   dirty(&asblk);
>   }
> +#if 0
>   if (sblock.fs_cgsize != fragroundup(&sblock, CGSIZE(&sblock))) {
>   pwarn("INCONSISTENT CGSIZE=%d\n", sblock.fs_cgsize);
>   sblock.fs_cgsize = fragroundup(&sblock, CGSIZE(&sblock));
> @@ -346,6 +347,7 @@ setup(char *dev)
>   dirty(&asblk);
>   }
>   }
> +#endif
>   if (INOPB(&sblock) != sblock.fs_bsize / sizeof(struct ufs1_dinode)) {
>   pwarn("INCONSISTENT INOPB=%d\n", INOPB(&sblock));
>   sblock.fs_inopb = sblock.fs_bsize / sizeof(struct ufs1_dinode);

Re: fsck Segmentation fault on 4.1

[Marcos Laufer]

Will this be moved to -stable, or is it an uncommon thing ?

- Original Message - 
From: "Otto Moerbeek" <[EMAIL PROTECTED]>
To: "Marcos Laufer" <[EMAIL PROTECTED]>
Cc: 
Sent: Thursday, July 19, 2007 3:09 PM
Subject: Re: fsck Segmentation fault on 4.1


On Fri, 13 Jul 2007, Otto Moerbeek wrote:

> On Fri, 13 Jul 2007, Marcos Laufer wrote:
> 
> > Otto ,
> > 
> > This is the error i get:
> > It starts booting , and it starts fsck , it fails with /dev/rwd0e and rwd0h,
> > 
> > (i could see once that when it finished it says:)
> > fsck_ffs in free():  error: free_page: pointer to wrong page
> > fsck: /dev/rwd0h: Abort trap
> > 
> > I reboot it again many times and that did not show again
> > 
> > 
> > i try to fsck manually like this as you say and i get:
> > 
> > # ulimit -d unlimited
> > # fsck -y /dev/rwd0e
> > 
> > INCONSISTENT CGSIZE=16384
> > 
> > FIX? yes
> > 
> > * * Last mounted on /usr
> > * * Phase 1- Check Blocks and Sizes
> > * * Phase 2 - Check pathnames
> > * * Phase 3 - Check Conectivity
> > * * Phase 4 - Check Reference Counts
> > * * Phase 5 - Check Cyl Groups
> > 
> > CANNOT READ: BLK 64
> > 
> > CONTINUE? yes
> > 
> > fsck: /dev/rwd0e: Segmentation Fault
> 
> This is not an out of memory situation.
> 
> It looks like fsck_ffs has problems getting data from your disk,
> probably because of hardware failure or bad cabling.  Sometimes it
> detects it cannot read the data (the CANNOT READ: BLK 64 case), but it
> is possible it gets corrupted data in other cases. 
> 
> Sadly, this can cause fsck_ffs to do the wrong thing and access wrong
> memory and corrupt it's internal data. During the last year I've fixed
> some stuff in this area, but there still remains cases that can go
> wrong.

I misdiagnosed the problem. In the meantime I got another report with
a dd of the partition which enabled me to diagnose the problem and
make a fix for 4.1. Please test and report back. I'll be on vacation
from Saturday, so it would be nice if you can answer before that. 

Anobody else seeing INCONSISTENT CGSIZE messages should try this as well.

NOTE: this diff only applies to 4.1. Current does not have the
problem, due to a corrected CGSIZE macro.

-Otto

Index: setup.c
===
RCS file: /cvs/src/sbin/fsck_ffs/setup.c,v
retrieving revision 1.29
diff -u -p -r1.29 setup.c
--- setup.c 16 Feb 2007 08:34:29 - 1.29
+++ setup.c 19 Jul 2007 18:02:36 -
@@ -336,6 +336,7 @@ setup(char *dev)
  sbdirty();
  dirty(&asblk);
  }
+#if 0
  if (sblock.fs_cgsize != fragroundup(&sblock, CGSIZE(&sblock))) {
  pwarn("INCONSISTENT CGSIZE=%d\n", sblock.fs_cgsize);
  sblock.fs_cgsize = fragroundup(&sblock, CGSIZE(&sblock));
@@ -346,6 +347,7 @@ setup(char *dev)
  dirty(&asblk);
  }
  }
+#endif
  if (INOPB(&sblock) != sblock.fs_bsize / sizeof(struct ufs1_dinode)) {
  pwarn("INCONSISTENT INOPB=%d\n", INOPB(&sblock));
  sblock.fs_inopb = sblock.fs_bsize / sizeof(struct ufs1_dinode);

Re: mysql problem

[Marcos Laufer]

> You didn't read it and you didn't pay attention to statement in bold
> either. I could tell you what to do to fix it, but then you wouldn't
> learn from it. If it wasn't explain there, I would be happy to tell you,
> but it is there and pretty clear as well.

Daniel ,
When i post a message on the OpenBSD misc list it is because one
of two reasons:

1) I want to report an error i found while testing OpenBSD, and by
reporting it i might be helping the project, somebody might be able
 to fix it and the OS grows.

2) I could be asking for help to the OpenBSD users, as it was this case.
I know this was not an OpenBSD or MySQL problem, but a
configuration problem , and  maybe some other OpenBSD user might
 have already been there and willing to help other OpenBSD users to
work things out.

If you are an OpenBSD developer then i must tell you that i understand
your 'I could tell you what to do to fix it, but then you wouldn't learn
from it' attitude .
It's logic to think that developers want users to learn how to handle the OS
and how to properly use it.

If you are not an OpenBSD developer, but an OpenBSD user instead ,
then i must tell you that your 'I could tell you what to do to fix it, but
then you wouldn't learn from it' attitude just sucks.
I was asking for help, i mentioned that this was a production
server with 100 databases on it and i was urged to solve
it fast. That's why i asked help to other OpenBSD users who might have
suffered this problem on a production server and needed to solve it fast.

But i will take a shot and assume you are just another OpenBSD user, just
like me and many others looking for help in this list .
So , Daniel consider this : Next time i ask for help on this list , my post
won't be meant to be answered by you , i now know that you don't have a
helping community spirit but a 'bofh' attitude instead probably due to a
wannabeadeveloper feeling. If you want to help a user to solve his problems
that's just fine, but to talk other users in that tone, to me for example,
i won't allow it.

Re: [solved] mysql problem

[Marcos Laufer]

Otto ,

I did read it , many times. I did not just plugged in bigger
numbers, i'd like to think that i know what i'm doing here .
I increased the values acorrding to my hardware and mysql
status that needed to be increased in order to improve performance.
I made my login.conf and my.cnf correspond to each other also.
I found this links very useful, these provide ways to
monitor your mysql server, improve performance and some
ways to determine when to increase some values and when
to decrease some others. I know some users
will benefit from these:

http://hackmysql.com/mysqlreportguide
http://www.ibm.com/developerworks/linux/library/l-tune-lamp-3.html
http://www.mysqlperformanceblog.com


The link http://openbsdsupport.org/mysql.htm doesn't help on
how to improve mysql , but just how to start it and how to handle
descriptors properly. There's no problem on following those
instructions.

I happened to find out that the problem on this case was not related to
my configuration or openbsd itself, but to a modification on the
mysqld_safe script made by the previous administrator of this server,
i found this:

--
echo "Starting $MYSQLD daemon with databases from $DATADIR"

ulimit -a

echo ---

ulimit -n 2048 > /dev/null 2>&1   # FIX para open files

echo ---

ulimit -a
--

So that was the reason i couldn't complete a full mysqlcheck on all
databases,
i was limited by that ulimit on mysqld_safe which wouldn't let me open more
that 2048 files despite of what i configured in my.cnf.

Regards,


- Original Message - 
From: "Otto Moerbeek" <[EMAIL PROTECTED]>
To: "Marcos Laufer" <[EMAIL PROTECTED]>
Cc: ; <[EMAIL PROTECTED]>; "Daniel Ouellet"
<[EMAIL PROTECTED]>
Sent: Sunday, July 15, 2007 3:54 AM
Subject: Re: mysql problem


On Sun, 15 Jul 2007, Marcos Laufer wrote:

> Ok , i had followed the instructions at
http://openbsdsupport.org/mysql.htm

No you did not. You plugged in bigger numbers. That could very well be
your problem. Also there should be some correspondence to the numbers
in login.conf and my.cnf.

Another thing to watch out for: the login.conf syntax is extremely
unforgiving, an extra space or tab after a \ can ruin your day.

-Otto


>
> And now i have this configuration:
>
> I start mysql with this script:

Re: mysql problem

[Marcos Laufer]

Ok , i had followed the instructions at http://openbsdsupport.org/mysql.htm

And now i have this configuration:

I start mysql with this script:

# cat /usr/local/bin/mysql.start
if [ -x /usr/local/bin/mysqld_safe ] ; then
su -c _mysql root -c '/usr/local/bin/mysqld_safe &' > /dev/null &
echo -n ' mysql'
fi

That properly starts it with the correct login class.

My login.conf for mysql is:

_mysql:\
   # :openfiles=8192:\
:openfiles=infinity:\
:datasize=infinity:\
:maxproc=infinity:\
#:openfiles-cur=8192:\
:openfiles-cur=infinity:\
#:openfiles-max=1:\
:openfiles-max=infinity:\
:stacksize-cur=8M:

I want to set infinity on those now just for testing, if everything works
fine i will put some limits there.


My kern.maxfiles:

# sysctl kern.maxfiles
kern.maxfiles=2


And my.cnf has :

[mysqld]
socket = /var/www/logs/mysql/mysql.sock
old-passwords
tmpdir = /var/mysql/tmp
open_files_limit = 1
max_connections = 4096
sql-mode = MYSQL40
skip-name-resolve
table_cache = 5000
query_cache_size = 64M
thread_cache = 32
key_buffer = 128M
long_query_time = 5
thread_concurrency = 2
interactive_timeout=60
wait_timeout=60
connect_timeout=15
record_buffer=8M

basedir=/usr/local
datadir=/var/mysql

sort_buffer_size = 32M
read_buffer_size = 2M
read_rnd_buffer_size = 4M
myisam_sort_buffer_size = 64M

[mysql.server]
old-passwords

[mysqld_safe]
open-files=8192
open_files_limit = 1
max_connections = 4096

[mysqlcheck]
socket = /var/www/logs/mysql/mysql.sock

--

The server has more than 100 databases, it's been working fine for about a
year .
A couple of days ago i found that no database could be accessed . Errors
like this appear:
070714 16:15:57 [ERROR] /usr/local/libexec/mysqld: Can't find file:
'./ip041271_tan1/mos_weblinks.frm' (errno: 9)
070714 16:15:57 [ERROR] /usr/local/libexec/mysqld: Can't find file:
'./ip041271_tan1/mos_weblinks.frm' (errno: 9)

I restart the server and everything goes back to normal , but i reach my
limits if i execute a:

mysqlcheck -m -A -p


By the moment the limits are reached, i noticed that this values Open_files
and Opened_tables reached:

mysql> show status like '%Open%';
++---+
| Variable_name  | Value |
++---+
| Com_ha_open| 0 |
| Com_show_open_tables   | 0 |
| Open_files | 2031  |
| Open_streams   | 0 |
| Open_tables| 1053  |
| Opened_tables  | 0 |
| Slave_open_temp_tables | 0 |
++---+
7 rows in set (0.00 sec)

or for example

mysql> show status like 'open%';
+---+---+
| Variable_name | Value |
+---+---+
| Open_files| 2030  |
| Open_streams  | 0 |
| Open_tables   | 1077  |
| Opened_tables | 0 |
+---+---+
4 rows in set (0.00 sec)


I know i must be doing something wrong, but i just can't find out what .
I still don't know why i reach limits with mysqlcheck when i am setting
all those values right. I guess the limit i'm reaching is Open_files .
The question is , why?

Regards,
Marcos

Re: mysql problem

[Marcos Laufer]

Allright the, i start the mysql server with this:

if [ -x /usr/local/bin/mysqld_safe ] ; then
su -c _mysql root -c '/usr/local/bin/mysqld_safe &' > /dev/null &
echo -n ' mysql'
fi

but the problem still persists , it shows up when executing
mysqlcheck -m -A -p

Now what?

Regards,
Marcos


- Original Message - 
From: "Clint Pachl" <[EMAIL PROTECTED]>
Cc: "Marcos Laufer" <[EMAIL PROTECTED]>; 
Sent: Friday, July 13, 2007 6:05 PM
Subject: Re: mysql problem


Otto Moerbeek wrote:
> On Fri, 13 Jul 2007, Marcos Laufer wrote:
>
>
>> I did read the archives, and it helped me to find out that
>> restarting mysql fixes it for some time, and i increased the values
>> several times but no luck. It starts working fine
>> for a while but then again it fails . In the end i have
>> this config right now and the problem persists, i can
>> reproduce the problem just by executing
>>
>> mysqlcheck -m -A -p
>>
>
> How are yo starting mysql? You need to explicitly set the login class.
>
> Somthing like
>
> su -c mysql root /usr/local/bin/mysqld_safe ...
>
> -Otto
>

Otto is right. Here is my /etc/postgresql.rc script, which should give
you some ideas for managing mysql (notice ``SU'').

#!/bin/sh
exec >&2
DATA=/var/postgresql/data
LOG=/var/postgresql/log
CMD=$1
PUSR=_postgresql
PCLS=postgresql
CTL=/usr/local/bin/pg_ctl
SU="su -l -c $PCLS $PUSR -c"

userinfo -e $PUSR || { echo "$PUSR user nonexistent."; exit 1; }
grep -q "^${PCLS}:" /etc/login.conf || { echo "$PCLS class
nonexistent."; exit 1; }
[ -x $CTL ] || { echo "$CTL not executable."; exit 1; }

case $CMD in
stop|reload|status)
$SU "exec $CTL $CMD -D $DATA"
;;
start|restart)
$SU "exec $CTL $CMD -D $DATA -l $LOG"
chmod 644 $LOG
;;
*)
echo "usage: $0 stop|restart|reload|status|start (will run as
$PUSR)"
;;
esac


And the relevant sections of /etc/login.conf

daemon:\
:ignorenologin:\
:datasize=infinity:\
:maxproc=infinity:\
:openfiles-cur=128:\
:stacksize-cur=8M:\
:localcipher=blowfish,8:\
:tc=default:

postgresql:\
:openfiles-cur=768:\
:tc=daemon:


-pachl

>> --
>> # sysctl kern.maxfiles
>> kern.maxfiles=2
>> --

Re: fsck Segmentation fault on 4.1

[Marcos Laufer]

Otto,

I know the cables are allright, i'm using them with other hard drive .
And the hard drive is new , but i will format it and check if it
shows up some errors.
I hope it is hardware related , i would get kind of scared otherwise.
Do you need me to try anything else with this filesystem?

Regards,
Marcos

- Original Message - 
From: "Otto Moerbeek" <[EMAIL PROTECTED]>
To: "Marcos Laufer" <[EMAIL PROTECTED]>
Cc: 
Sent: Friday, July 13, 2007 4:46 PM
Subject: Re: fsck Segmentation fault on 4.1


On Fri, 13 Jul 2007, Marcos Laufer wrote:

> Otto ,
>
> This is the error i get:
> It starts booting , and it starts fsck , it fails with /dev/rwd0e and rwd0h,
>
> (i could see once that when it finished it says:)
> fsck_ffs in free():  error: free_page: pointer to wrong page
> fsck: /dev/rwd0h: Abort trap
>
> I reboot it again many times and that did not show again
>
>
> i try to fsck manually like this as you say and i get:
>
> # ulimit -d unlimited
> # fsck -y /dev/rwd0e
>
> INCONSISTENT CGSIZE=16384
>
> FIX? yes
>
> * * Last mounted on /usr
> * * Phase 1- Check Blocks and Sizes
> * * Phase 2 - Check pathnames
> * * Phase 3 - Check Conectivity
> * * Phase 4 - Check Reference Counts
> * * Phase 5 - Check Cyl Groups
>
> CANNOT READ: BLK 64
>
> CONTINUE? yes
>
> fsck: /dev/rwd0e: Segmentation Fault

This is not an out of memory situation.

It looks like fsck_ffs has problems getting data from your disk,
probably because of hardware failure or bad cabling.  Sometimes it
detects it cannot read the data (the CANNOT READ: BLK 64 case), but it
is possible it gets corrupted data in other cases.

Sadly, this can cause fsck_ffs to do the wrong thing and access wrong
memory and corrupt it's internal data. During the last year I've fixed
some stuff in this area, but there still remains cases that can go
wrong.

-Otto


> # _
>
>
> The dmesg is:
>
> OpenBSD 4.1-stable (GENERIC) #0: Mon May 14 14:02:47 ART 2007
> [EMAIL PROTECTED]:/u/system/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Pentium(R) 4 CPU 2.80GHz ("GenuineIntel" 686-class) 2.81 GHz
> cpu0:
>
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX
> ,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
> real mem  = 1064857600 (1039900K)
> avail mem = 964222976 (941624K)
> using 4278 buffers containing 53366784 bytes (52116K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+ BIOS, date 09/15/03, BIOS32 rev. 0 @ 0xfbbd0, 
> SMBIOS rev. 2.2
@
> 0xf0800 (39 entries)
> bios0: MICRO-STAR INTL, CO.,LTD. MS-6743
> apm0 at bios0: Power Management spec V1.2
> apm0: AC on, battery charge unknown
> apm0: flags 70102 dobusy 1 doidle 1
> pcibios0 at bios0: rev 2.1 @ 0xf/0xdf84
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdeb0/176 (9 entries)
> pcibios0: PCI Exclusive IRQs: 3 4 5 7 10 11
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371SB ISA" rev 0x00)
> pcibios0: PCI bus #1 is the last bus
> bios0: ROM list: 0xc/0xa600 0xcc000/0x1800
> acpi at mainbus0 not configured
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82865G/PE/P CPU-I/0-1" rev 0x02
> vga1 at pci0 dev 2 function 0 "Intel 82865G Video" rev 0x02: aperture at 
> 0xf000,
size
> 0x800
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> ppb0 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
> pci1 at ppb0 bus 1
> fxp0 at pci1 dev 8 function 0 "Intel PRO/100 VE" rev 0x02, i82562: irq 10, 
> address
> 00:0c:76:b5:8a:85
> inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
> pciide0 at pci0 dev 31 function 2 "Intel 82801EB SATA" rev 0x02: DMA, channel > 0
configured
> to compatibility, channel 1 configured to compatibility
> wd0 at pciide0 channel 0 drive 1: 
> wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
> wd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
> atapiscsi0 at pciide0 channel 1 drive 1
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0:  SCSI0 5/cdrom 
> removable
> cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
> ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: irq 4
> iic0 at ichiic0
> iic0: addr 0x2f 04=00 06=0a 07=00 0c=00 0d=07 0e=85 0f=00 10=c0 11=11 12=00 
> 13=60 14=14
> 15=62 16=01 17=06
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: consol

Re: fsck Segmentation fault on 4.1

[Marcos Laufer]

Otto ,

This is the error i get:
It starts booting , and it starts fsck , it fails with /dev/rwd0e and rwd0h,

(i could see once that when it finished it says:)
fsck_ffs in free():  error: free_page: pointer to wrong page
fsck: /dev/rwd0h: Abort trap

I reboot it again many times and that did not show again


i try to fsck manually like this as you say and i get:

# ulimit -d unlimited
# fsck -y /dev/rwd0e

INCONSISTENT CGSIZE=16384

FIX? yes

* * Last mounted on /usr
* * Phase 1- Check Blocks and Sizes
* * Phase 2 - Check pathnames
* * Phase 3 - Check Conectivity
* * Phase 4 - Check Reference Counts
* * Phase 5 - Check Cyl Groups

CANNOT READ: BLK 64

CONTINUE? yes

fsck: /dev/rwd0e: Segmentation Fault
# _


The dmesg is:

OpenBSD 4.1-stable (GENERIC) #0: Mon May 14 14:02:47 ART 2007
[EMAIL PROTECTED]:/u/system/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.80GHz ("GenuineIntel" 686-class) 2.81 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX
,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem  = 1064857600 (1039900K)
avail mem = 964222976 (941624K)
using 4278 buffers containing 53366784 bytes (52116K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 09/15/03, BIOS32 rev. 0 @ 0xfbbd0, SMBIOS 
rev. 2.2 @
0xf0800 (39 entries)
bios0: MICRO-STAR INTL, CO.,LTD. MS-6743
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf/0xdf84
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdeb0/176 (9 entries)
pcibios0: PCI Exclusive IRQs: 3 4 5 7 10 11
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371SB ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc/0xa600 0xcc000/0x1800
acpi at mainbus0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82865G/PE/P CPU-I/0-1" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82865G Video" rev 0x02: aperture at 
0xf000, size
0x800
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb0 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci1 at ppb0 bus 1
fxp0 at pci1 dev 8 function 0 "Intel PRO/100 VE" rev 0x02, i82562: irq 10, 
address
00:0c:76:b5:8a:85
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 2 "Intel 82801EB SATA" rev 0x02: DMA, channel 0 
configured
to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 1: 
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0:  SCSI0 5/cdrom 
removable
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: irq 4
iic0 at ichiic0
iic0: addr 0x2f 04=00 06=0a 07=00 0c=00 0d=07 0e=85 0f=00 10=c0 11=11 12=00 
13=60 14=14
15=62 16=01 17=06
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: 
spkr0 at pcppi0
lm0 at isa0 port 0x290/8: W83627THF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask ebfd netmask effd ttymask 
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302


- Original Message - 
From: "Otto Moerbeek" <[EMAIL PROTECTED]>
To: "Marcos Laufer" <[EMAIL PROTECTED]>
Cc: 
Sent: Friday, July 13, 2007 3:38 PM
Subject: Re: fsck Segmentation fault on 4.1


On Fri, 13 Jul 2007, Marcos Laufer wrote:

> Hello,
>
> I want to report a problem i experienced while testing OpenBSD 4.1 .
> I've installed it, increased VM_PHYSSEG_MAX to 16
> in /usr/src/sys/arch/i386/include/vmparam.h to make
> it work with this particular motherboard and made a
> stable release.
> Installed a server with it and it's working fine as an MX for
> a few months until now.
> The machine was crashed, no error on the screen and the keyboard
> did not respond. I rebooted , it started to fsck , and
> the fsck failed on /usr. So i run fsck manually : fsck -y, but
> it crashes with segmentation fault, so i can't mount or
> start the server.
> I read on the archives that it was a problem because of running out
> of swap, but i had made a 2gb swap partition, despite of that
> i added a 64mb file as swap and tried fsck again, but no luck.

Re: mysql problem

[Marcos Laufer]

I will start it as you say .
I will let you know it it worked
Thanks !
Marcos

- Original Message - 
From: "Otto Moerbeek" <[EMAIL PROTECTED]>
To: "Marcos Laufer" <[EMAIL PROTECTED]>
Cc: "Bob Beck" <[EMAIL PROTECTED]>; 
Sent: Friday, July 13, 2007 3:32 PM
Subject: Re: mysql problem


On Fri, 13 Jul 2007, Marcos Laufer wrote:

> Bob , i saw what you meant me to set, it was on the daemon login
> class , i changed it with chfn to _mysql .
> Tonight i will test it again with mysqlcheck -m -A -p 
> to see if i still reach the limits.

When starting a program, the login class is not changed unless
explictly overridden. Setting the default login class of a user won't
help. 

You need to do what I wrote earlier: use sudo -c class user command...

-Otto

> 
> Thanks for your advice!
> 
> Regards,
> Marcos
> 
> 
> - Original Message - 
> From: "Bob Beck" <[EMAIL PROTECTED]>
> To: "Marcos Laufer" <[EMAIL PROTECTED]>
> Cc: "Otto Moerbeek" <[EMAIL PROTECTED]>; 
> Sent: Friday, July 13, 2007 1:54 PM
> Subject: Re: mysql problem
> 
> 
> 
> 
> You are setting the user, not the login class.
> 
> You have made a login class _mysql in /etc/login.conf,
> but it looks like you may not have that as user _mysql's default
> login class. You need to either change user _mysql to be in the 
> _mysql login class by default, (hint, chfn _mysql as root) OR, 
> use the su command to start it as otto showed you.
> 
> Note as well, that just setting it to use 8192 open
> files won't necessarily get you all the way there if the
> kernel doesn't have that many configured. You may also need
> to increase this if you *really* need that many:
> 
> # sysctl kern.maxfiles
> kern.maxfiles=1772
> 
> -Bob
> 
> 
> * Marcos Laufer <[EMAIL PROTECTED]> [2007-07-13 10:46]:
> > I am , and i have a simple and nice script for starting and stopping it
> > properly:
> > 
> > # /usr/local/bin/my start
> > 
> > cat /usr/local/bin/my 
> > 
> > #!/bin/sh
> > #
> > test -z "$1" -o \( "$1" != "start" -a "$1" != "stop" \) \
> >&& echo "syntax: $0 [start|stop]" && exit 1
> > 
> > exec /usr/local/share/mysql/mysql.server $1 > /dev/null 2>&1
> > 
> > --
> > and in mysql.server it says:
> > 
> > # Set some defaults
> > pid_file=
> > server_pid_file=
> > use_mysqld_safe=1
> > user=_mysql
> > 
> > 
> > What do you think, should i add more openfiles to mysql? 
> > Regards,
> > Marcos
> > 
> > - Original Message - 
> > From: "Otto Moerbeek" <[EMAIL PROTECTED]>
> > To: "Marcos Laufer" <[EMAIL PROTECTED]>
> > Cc: 
> > Sent: Friday, July 13, 2007 4:07 AM
> > Subject: Re: mysql problem
> > 
> > 
> > On Fri, 13 Jul 2007, Marcos Laufer wrote:
> > 
> > > I did read the archives, and it helped me to find out that
> > > restarting mysql fixes it for some time, and i increased the values
> > > several times but no luck. It starts working fine
> > > for a while but then again it fails . In the end i have
> > > this config right now and the problem persists, i can
> > > reproduce the problem just by executing
> > > 
> > > mysqlcheck -m -A -p
> > 
> > How are yo starting mysql? You need to explicitly set the login class.
> > 
> > Somthing like 
> > 
> > su -c mysql root /usr/local/bin/mysqld_safe ...
> > 
> > -Otto
> > > 
> > > 
> > > --
> > > # sysctl kern.maxfiles
> > > kern.maxfiles=2
> > > --
> > > 
> > > in login.conf:
> > > _mysql:\
> > > :openfiles=8192:\
> > > :datasize=infinity:\
> > > :maxproc=infinity:\
> > > :openfiles-cur=8192:\
> > > :openfiles-max=1:\
> > > :stacksize-cur=8M:
> > > 
> > > 
> > > 
> > > in my.cnf:
> > > 
> > > [mysqld]
> > > socket = /var/www/logs/mysql/mysql.sock
> > > old-passwords
> > > tmpdir = /var/mysql/tmp
> > > open-files-limit = 1
> > > sql-mode = MYSQL40
> > > skip-name-resolve
> > > table_cache = 1024
> > > query_cache_size = 64M
> > > key_buffer = 64M
> > > long_query_time = 5
> > > #log-slow-queries
> > > #log-queries-not-using-indexes
> > > thread_concurre

Re: mysql problem

[Marcos Laufer]

Bob , i saw what you meant me to set, it was on the daemon login
class , i changed it with chfn to _mysql .
Tonight i will test it again with mysqlcheck -m -A -p 
to see if i still reach the limits.

Thanks for your advice!

Regards,
Marcos


- Original Message - 
From: "Bob Beck" <[EMAIL PROTECTED]>
To: "Marcos Laufer" <[EMAIL PROTECTED]>
Cc: "Otto Moerbeek" <[EMAIL PROTECTED]>; 
Sent: Friday, July 13, 2007 1:54 PM
Subject: Re: mysql problem




You are setting the user, not the login class.

You have made a login class _mysql in /etc/login.conf,
but it looks like you may not have that as user _mysql's default
login class. You need to either change user _mysql to be in the 
_mysql login class by default, (hint, chfn _mysql as root) OR, 
use the su command to start it as otto showed you.

Note as well, that just setting it to use 8192 open
files won't necessarily get you all the way there if the
kernel doesn't have that many configured. You may also need
to increase this if you *really* need that many:

# sysctl kern.maxfiles
kern.maxfiles=1772

-Bob


* Marcos Laufer <[EMAIL PROTECTED]> [2007-07-13 10:46]:
> I am , and i have a simple and nice script for starting and stopping it
> properly:
> 
> # /usr/local/bin/my start
> 
> cat /usr/local/bin/my 
> 
> #!/bin/sh
> #
> test -z "$1" -o \( "$1" != "start" -a "$1" != "stop" \) \
>&& echo "syntax: $0 [start|stop]" && exit 1
> 
> exec /usr/local/share/mysql/mysql.server $1 > /dev/null 2>&1
> 
> --
> and in mysql.server it says:
> 
> # Set some defaults
> pid_file=
> server_pid_file=
> use_mysqld_safe=1
> user=_mysql
> 
> 
> What do you think, should i add more openfiles to mysql? 
> Regards,
> Marcos
> 
> - Original Message - 
> From: "Otto Moerbeek" <[EMAIL PROTECTED]>
> To: "Marcos Laufer" <[EMAIL PROTECTED]>
> Cc: 
> Sent: Friday, July 13, 2007 4:07 AM
> Subject: Re: mysql problem
> 
> 
> On Fri, 13 Jul 2007, Marcos Laufer wrote:
> 
> > I did read the archives, and it helped me to find out that
> > restarting mysql fixes it for some time, and i increased the values
> > several times but no luck. It starts working fine
> > for a while but then again it fails . In the end i have
> > this config right now and the problem persists, i can
> > reproduce the problem just by executing
> > 
> > mysqlcheck -m -A -p
> 
> How are yo starting mysql? You need to explicitly set the login class.
> 
> Somthing like 
> 
> su -c mysql root /usr/local/bin/mysqld_safe ...
> 
> -Otto
> > 
> > 
> > --
> > # sysctl kern.maxfiles
> > kern.maxfiles=2
> > --
> > 
> > in login.conf:
> > _mysql:\
> > :openfiles=8192:\
> > :datasize=infinity:\
> > :maxproc=infinity:\
> > :openfiles-cur=8192:\
> > :openfiles-max=1:\
> > :stacksize-cur=8M:
> > 
> > 
> > 
> > in my.cnf:
> > 
> > [mysqld]
> > socket = /var/www/logs/mysql/mysql.sock
> > old-passwords
> > tmpdir = /var/mysql/tmp
> > open-files-limit = 1
> > sql-mode = MYSQL40
> > skip-name-resolve
> > table_cache = 1024
> > query_cache_size = 64M
> > key_buffer = 64M
> > long_query_time = 5
> > #log-slow-queries
> > #log-queries-not-using-indexes
> > thread_concurrency = 2
> > #query_cache_limit = 1M
> > interactive_timeout=60
> > wait_timeout=60
> > connect_timeout=15
> > 
> > basedir=/usr/local
> > datadir=/var/mysql
> > 
> > sort_buffer_size = 1M
> > read_buffer_size = 1M
> > read_rnd_buffer_size = 4M
> > myisam_sort_buffer_size = 64M
> > 
> > [mysql.server]
> > old-passwords
> > 
> > [mysqld_safe]
> > open-files=8192
> > 
> > 
> > 
> > 
> > Maybe i need to increase something else?
> > Thanks!
> > 
> > 
> > - Original Message - 
> > From: "Otto Moerbeek" <[EMAIL PROTECTED]>
> > To: "Marcos Laufer" <[EMAIL PROTECTED]>
> > Cc: 
> > Sent: Friday, July 13, 2007 3:12 AM
> > Subject: Re: mysql problem
> > 
> > 
> > On Fri, 13 Jul 2007, Marcos Laufer wrote:
> > 
> > > I am having a very strange problem on a 3.9 , suddenly i can't access any
> > > table
> > > on the databases. I have around 100 databases on this server and can't
> > access
> > > not even one. This is a production server and i am in an urge to solve it,
> > if
> > > anyone
> > > can help i would appreciate it:
> > >
> > > # mysql mysql -p
> > > Enter password:
> > > Welcome to the MySQL monitor.  Commands end with ; or \g.
> > > Your MySQL connection id is 303342 to server version: 5.0.18
> > >
> > > Type 'help;' or '\h' for help. Type '\c' to clear the buffer.
> > >
> > > mysql> show tables;
> > > ERROR 1018 (HY000): Can't read dir of './mysql/' (errno: 9)
> > > mysql>
> > >
> > >
> > > I have backups of all databases, including mysql database which i think is
> > the
> > > one
> > > broken , how can i restore it ?
> > >
> > > Thanks for your help
> > 
> > You are running out of file descriptors. Search the archives for answers.
> > 
> > -Otto
> 

-- 
#!/usr/bin/perl
if ((not 0 && not 1) !=  (! 0 && ! 1)) {
   print "Larry and Tom must smoke some really primo stuff...\n"; 
}

fsck Segmentation fault on 4.1

[Marcos Laufer]

Hello,

I want to report a problem i experienced while testing OpenBSD 4.1 .
I've installed it, increased VM_PHYSSEG_MAX to 16
in /usr/src/sys/arch/i386/include/vmparam.h to make
it work with this particular motherboard and made a
stable release.
Installed a server with it and it's working fine as an MX for
a few months until now.
The machine was crashed, no error on the screen and the keyboard
did not respond. I rebooted , it started to fsck , and
the fsck failed on /usr. So i run fsck manually : fsck -y, but
it crashes with segmentation fault, so i can't mount or
start the server.
I read on the archives that it was a problem because of running out
of swap, but i had made a 2gb swap partition, despite of that
i added a 64mb file as swap and tried fsck again, but no luck.
This time it was easy for me to reinstall everything in a new hard disk, but
i still keep the old one because i would like to learn how to fix
this , if anyone wants me to make some tests or has
any ideas on what is going on , let me know.

Regards,
Marcos

Re: mysql problem

[Marcos Laufer]

I am , and i have a simple and nice script for starting and stopping it
properly:

# /usr/local/bin/my start

cat /usr/local/bin/my 

#!/bin/sh
#
test -z "$1" -o \( "$1" != "start" -a "$1" != "stop" \) \
   && echo "syntax: $0 [start|stop]" && exit 1

exec /usr/local/share/mysql/mysql.server $1 > /dev/null 2>&1

--
and in mysql.server it says:

# Set some defaults
pid_file=
server_pid_file=
use_mysqld_safe=1
user=_mysql


What do you think, should i add more openfiles to mysql? 
Regards,
Marcos

- Original Message - 
From: "Otto Moerbeek" <[EMAIL PROTECTED]>
To: "Marcos Laufer" <[EMAIL PROTECTED]>
Cc: 
Sent: Friday, July 13, 2007 4:07 AM
Subject: Re: mysql problem


On Fri, 13 Jul 2007, Marcos Laufer wrote:

> I did read the archives, and it helped me to find out that
> restarting mysql fixes it for some time, and i increased the values
> several times but no luck. It starts working fine
> for a while but then again it fails . In the end i have
> this config right now and the problem persists, i can
> reproduce the problem just by executing
> 
> mysqlcheck -m -A -p

How are yo starting mysql? You need to explicitly set the login class.

Somthing like 

su -c mysql root /usr/local/bin/mysqld_safe ...

-Otto
> 
> 
> --
> # sysctl kern.maxfiles
> kern.maxfiles=2
> --
> 
> in login.conf:
> _mysql:\
> :openfiles=8192:\
> :datasize=infinity:\
> :maxproc=infinity:\
> :openfiles-cur=8192:\
> :openfiles-max=1:\
> :stacksize-cur=8M:
> 
> 
> 
> in my.cnf:
> 
> [mysqld]
> socket = /var/www/logs/mysql/mysql.sock
> old-passwords
> tmpdir = /var/mysql/tmp
> open-files-limit = 1
> sql-mode = MYSQL40
> skip-name-resolve
> table_cache = 1024
> query_cache_size = 64M
> key_buffer = 64M
> long_query_time = 5
> #log-slow-queries
> #log-queries-not-using-indexes
> thread_concurrency = 2
> #query_cache_limit = 1M
> interactive_timeout=60
> wait_timeout=60
> connect_timeout=15
> 
> basedir=/usr/local
> datadir=/var/mysql
> 
> sort_buffer_size = 1M
> read_buffer_size = 1M
> read_rnd_buffer_size = 4M
> myisam_sort_buffer_size = 64M
> 
> [mysql.server]
> old-passwords
> 
> [mysqld_safe]
> open-files=8192
> 
> 
> 
> 
> Maybe i need to increase something else?
> Thanks!
> 
> 
> - Original Message - 
> From: "Otto Moerbeek" <[EMAIL PROTECTED]>
> To: "Marcos Laufer" <[EMAIL PROTECTED]>
> Cc: 
> Sent: Friday, July 13, 2007 3:12 AM
> Subject: Re: mysql problem
> 
> 
> On Fri, 13 Jul 2007, Marcos Laufer wrote:
> 
> > I am having a very strange problem on a 3.9 , suddenly i can't access any
> > table
> > on the databases. I have around 100 databases on this server and can't
> access
> > not even one. This is a production server and i am in an urge to solve it,
> if
> > anyone
> > can help i would appreciate it:
> >
> > # mysql mysql -p
> > Enter password:
> > Welcome to the MySQL monitor.  Commands end with ; or \g.
> > Your MySQL connection id is 303342 to server version: 5.0.18
> >
> > Type 'help;' or '\h' for help. Type '\c' to clear the buffer.
> >
> > mysql> show tables;
> > ERROR 1018 (HY000): Can't read dir of './mysql/' (errno: 9)
> > mysql>
> >
> >
> > I have backups of all databases, including mysql database which i think is
> the
> > one
> > broken , how can i restore it ?
> >
> > Thanks for your help
> 
> You are running out of file descriptors. Search the archives for answers.
> 
> -Otto

Re: mysql problem

[Marcos Laufer]

I did read the archives, and it helped me to find out that
restarting mysql fixes it for some time, and i increased the values
several times but no luck. It starts working fine
for a while but then again it fails . In the end i have
this config right now and the problem persists, i can
reproduce the problem just by executing

mysqlcheck -m -A -p


--
# sysctl kern.maxfiles
kern.maxfiles=2
--

in login.conf:
_mysql:\
:openfiles=8192:\
:datasize=infinity:\
:maxproc=infinity:\
:openfiles-cur=8192:\
:openfiles-max=1:\
:stacksize-cur=8M:



in my.cnf:

[mysqld]
socket = /var/www/logs/mysql/mysql.sock
old-passwords
tmpdir = /var/mysql/tmp
open-files-limit = 1
sql-mode = MYSQL40
skip-name-resolve
table_cache = 1024
query_cache_size = 64M
key_buffer = 64M
long_query_time = 5
#log-slow-queries
#log-queries-not-using-indexes
thread_concurrency = 2
#query_cache_limit = 1M
interactive_timeout=60
wait_timeout=60
connect_timeout=15

basedir=/usr/local
datadir=/var/mysql

sort_buffer_size = 1M
read_buffer_size = 1M
read_rnd_buffer_size = 4M
myisam_sort_buffer_size = 64M

[mysql.server]
old-passwords

[mysqld_safe]
open-files=8192




Maybe i need to increase something else?
Thanks!


- Original Message - 
From: "Otto Moerbeek" <[EMAIL PROTECTED]>
To: "Marcos Laufer" <[EMAIL PROTECTED]>
Cc: 
Sent: Friday, July 13, 2007 3:12 AM
Subject: Re: mysql problem


On Fri, 13 Jul 2007, Marcos Laufer wrote:

> I am having a very strange problem on a 3.9 , suddenly i can't access any
> table
> on the databases. I have around 100 databases on this server and can't
access
> not even one. This is a production server and i am in an urge to solve it,
if
> anyone
> can help i would appreciate it:
>
> # mysql mysql -p
> Enter password:
> Welcome to the MySQL monitor.  Commands end with ; or \g.
> Your MySQL connection id is 303342 to server version: 5.0.18
>
> Type 'help;' or '\h' for help. Type '\c' to clear the buffer.
>
> mysql> show tables;
> ERROR 1018 (HY000): Can't read dir of './mysql/' (errno: 9)
> mysql>
>
>
> I have backups of all databases, including mysql database which i think is
the
> one
> broken , how can i restore it ?
>
> Thanks for your help

You are running out of file descriptors. Search the archives for answers.

-Otto

mysql problem

[Marcos Laufer]

I am having a very strange problem on a 3.9 , suddenly i can't access any
table
on the databases. I have around 100 databases on this server and can't access
not even one. This is a production server and i am in an urge to solve it, if
anyone
can help i would appreciate it:

# mysql mysql -p
Enter password:
Welcome to the MySQL monitor.  Commands end with ; or \g.
Your MySQL connection id is 303342 to server version: 5.0.18

Type 'help;' or '\h' for help. Type '\c' to clear the buffer.

mysql> show tables;
ERROR 1018 (HY000): Can't read dir of './mysql/' (errno: 9)
mysql>


I have backups of all databases, including mysql database which i think is the
one
broken , how can i restore it ?

Thanks for your help

Re: apache + php

[Marcos Laufer]

I've been seeing this since OpenBSD 3.4 with Uebimiau php webmail and
sometimes httpd stops working, restarting is needed.

- Original Message - 
From: "Joachim Schipper" <[EMAIL PROTECTED]>
To: 
Sent: Wednesday, July 11, 2007 10:28 AM
Subject: Re: apache + php


On Wed, Jul 11, 2007 at 12:56:27PM +0200, Marc Balmer wrote:
> Otto Moerbeek wrote:
> >On Wed, 11 Jul 2007, Adam PAPAI wrote:
> >>The system hangs after 1 day. It's a very strongly loaded system. Any
idea
> >>why? It seems that the system does not really handle the http requests
> >>well.
> >>
> >>/var/www/log/access_log snippet:
> >>
> >>httpd in malloc(): error: recursive call
> >>httpd in malloc(): error: recursive call
> >>[Mon Jul  9 18:33:39 2007] [notice] child pid 24755 exit signal Abort
(6)
> >>[Mon Jul  9 18:33:39 2007] [notice] child pid 10372 exit signal Abort
(6)
> >>[Mon Jul  9 18:33:39 2007] [notice] child pid 11192 exit signal
> >>Segmentation
> >>fault (11)
> >>[Mon Jul  9 18:33:39 2007] [notice] child pid 15994 exit signal
> >>Segmentation
> >>fault (11)
> >
> >The aborts and seg faults are likely caused by php. It's mostly sloppy
> >programming by the php developers.
>
> A know problem exists with PHP and anonymous mmaps in the kernel.  I do
> not know if this is what hits you here, but the symptons look much like
it.
>
> a busy system that runs, e.g. the horde/imp webmailer will hang within a
> short time (1.5 days over here).
>
> until there is a better solution, the workaround is quite easy:  restart
> httpd in a cronjob.

I'm sorry to intrude here, but is this problem new? I was not aware of
it. (And as a follow-up, can we expect it to be fixed any time soon?)

Joachim

-- 
PotD: x11/iwidgets - Iwidgets Mega Widget Set

Re: mysql4

[Marcos Laufer]

Daniel , 

How about Cacti? . Have you succesfully installed with mysql5?
Has ayone?
I'm having all kind of troubles to make it work on mysql5, and 
all recomendations go back to install mysql4

Regards,

- Original Message - 
From: "Daniel Ouellet" <[EMAIL PROTECTED]>
To: "Marcos Laufer" <[EMAIL PROTECTED]>
Cc: 
Sent: Wednesday, June 06, 2007 11:10 PM
Subject: Re: mysql4


Marcos Laufer wrote:
> I'm not sure that the reason mysql4 isn't in the packages is due to lack of
> time
> or resources..
> There must be some other reason, i think this because everytime there are
> more
> and more packages, so removing one that so many people use is kind of weird.

http://openbsd.org/faq/faq15.html#PkgFAQ

And the keep packages in sync with the OS. The version 4 was there a 
long time ago. Plus it's not the policy of the project to keep multiple 
version of a packages. PHP is an exception as an example, but sooner or 
later you can sure expect to see the PHP 4.x be drop all together for 
example.

> I was thinking about upgrading (by making a fresh install) to 4.1 an old 3.4
> webserver that also runs mysql4, and i had the intention of installing
> mysql4 on
> the new one so no modification on applications are needed.

No change in application would be needed really. Your SQL query are 
still SQL and will work as they are now. New version added new SQL 
functionality, but if you read MySQL, you will see, they didn't drop 
anything. Why would you think it wouldn't work. I see nothing to that 
effect at all. Any specific facts you want to share?

> I can't upgrade the users applications because this server runs at least
> 1000
> websites , the users won't like to modifiy their code, and i am not a
> programmer
> neither.

Nor would you have too. You connect to the database either by sockets or 
TCP connections. As long as your server is setup properly, it does the 
same thing. Again, any facts you want to share to the contrary?

> But if it's not in the packages , i guess i should have to compile it myself
> then.
> I just wanted to know the real reason (maybe there is a security reason) of
> why
> mysql4 isn't included in packages anymore, not just a guess.

Again all explain here, not a guess:

http://openbsd.org/faq/faq15.html#PkgFAQ

And more specifically, quote "The ports collection is a volunteer 
project. Sometimes the project simply doesn't have the developer 
resources to keep everything up-to-date. Developers pretty much pick up 
what they consider interesting and can test in their environment. Your 
donations can make a difference for testing ports on more platforms."

This statement also work both ways, meaning newer and older version. 
Simply not the resources to keep all possible version, plus it would 
pretty much useless if you asked me, witch I am sure you would disagree 
anyway.

But no, my first answer wasn't speculations, or guess.

Best,

Daniel

Fw: clamav on 3.9 [SOLVED]

[Marcos Laufer]

I just worked it out, sorry for the noise !

Just had to compile clamav again with the newest curl installed , and the
resulting clamav package worked just fine.



- Original Message - 
From: "Marcos Laufer" <[EMAIL PROTECTED]>
To: 
Sent: Thursday, June 28, 2007 4:11 PM
Subject: Fw: clamav on 3.9


I'v managed to compile curl (jsut had to remove the old one first)

but i still can't install the clamav package , i still get the same error
message:


test:/usr/ports/security/clamav{95}# pkg_add
/usr/ports/packages/i386/all/clamav-0.90.3p0.tgz
Can't install /usr/ports/packages/i386/all/clamav-0.90.3p0.tgz: lib not
found curl.3.3
Even by looking in the dependency tree:
arc-5.21n, libidn-0.6.1, libiconv-1.9.2p3, bzip2-1.0.3,
zoo-2.10.1p0, unzip-5.52, lha-1.14i.ac20050924, gettext-0.14.5p1,
expat-1.95.6p1, gmp-4.1.4p0, curl-7.16.2
Maybe it's in a dependent package, but not tagged with @lib ?
(check with pkg_info -K -L)
If you are still running 3.6 packages, update them.
test:/usr/ports/security/clamav{96}#


- Original Message - 
From: "Marcos Laufer" <[EMAIL PROTECTED]>
To: 
Sent: Thursday, June 28, 2007 3:56 PM
Subject: clamav on 3.9


Hi there,

I'm trying to install the newest clamav (0.90.3) on OpenBSD 3.9 . I updated
the
sources, and managed to compile it . But when i try to install the package i
get this error:

 pkg_add /usr/ports/packages/i386/all/clamav-0.90.3p0.tgz
Can't install /usr/ports/packages/i386/all/clamav-0.90.3p0.tgz: lib not
found idn.16.15
Even by looking in the dependency tree:
lha-1.14i.ac20050924, unzip-5.52, arc-5.21n, gmp-4.1.4p0,
libiconv-1.9.2p3, bzip2-1.0.3, curl-7.15.3, zoo-2.10.1p0
Maybe it's in a dependent package, but not tagged with @lib ?
(check with pkg_info -K -L)
If you are still running 3.6 packages, update them.

And libidn is installed :
 pkg_info |grep libid
libidn-0.6.1internationalized string handling

I read here http://www.mail-archive.com/[EMAIL PROTECTED]/msg11199.html
someone
had a similar problem and his solution was to update curl as well , but i
can't
upgrade it because i get another funky error:

/usr/local/bin/libtool  --tag=CC--mode=link
  -O2 -pipe   -L/usr/local/lib -o curl main.o hugehelp.o urlglob.o
writeout.o writeenv.o getpass.o  homedir.o curlutil.o strtoofft.o strdup.o
../lib/libcurl.la  -lz
mkdir .libs
cc -O2 -pipe -o .libs/curl main.o hugehelp.o urlglob.o writeout.o writeenv.o
getpass.o homedir.o curlutil.o strtoofft.o
strdup.o  -L/usr/local/lib -L../lib/.libs -lcurl -lcrypto -lssl -lidn -licon
v -lz -Wl,-rpath,/usr/local/lib
main.o(.text+0x2ff): In function `file2string':
: warning: strcpy() is almost always misused, please use strlcpy()
/usr/local/lib/libcurl.so.3.3: warning: sprintf() is often misused, please
use snprintf()
main.o(.text+0x68b1): In function `my_get_line':
: warning: strcat() is almost always misused, please use strlcat()
main.o(.text+0x4752): In function `operate':
: undefined reference to `curl_easy_escape'
collect2: ld returned 1 exit status
*** Error code 1
Stop in /u/system/ports/net/curl/w-curl-7.16.2/curl-7.16.2/src (line 358 of
Makefile).
*** Error code 1
Stop in /u/system/ports/net/curl/w-curl-7.16.2/curl-7.16.2/src (line 279 of
Makefile).
*** Error code 1
Stop in /u/system/ports/net/curl/w-curl-7.16.2/curl-7.16.2 (line 374 of
Makefile).
*** Error code 1
Stop in /u/system/ports/net/curl (line 1924 of
/usr/ports/infrastructure/mk/bsd.port.mk).

I'd appreciate any help on how to continue
Thanks!

Fw: clamav on 3.9

[Marcos Laufer]

I'v managed to compile curl (jsut had to remove the old one first)

but i still can't install the clamav package , i still get the same error
message:


test:/usr/ports/security/clamav{95}# pkg_add
/usr/ports/packages/i386/all/clamav-0.90.3p0.tgz
Can't install /usr/ports/packages/i386/all/clamav-0.90.3p0.tgz: lib not
found curl.3.3
Even by looking in the dependency tree:
arc-5.21n, libidn-0.6.1, libiconv-1.9.2p3, bzip2-1.0.3,
zoo-2.10.1p0, unzip-5.52, lha-1.14i.ac20050924, gettext-0.14.5p1,
expat-1.95.6p1, gmp-4.1.4p0, curl-7.16.2
Maybe it's in a dependent package, but not tagged with @lib ?
(check with pkg_info -K -L)
If you are still running 3.6 packages, update them.
test:/usr/ports/security/clamav{96}#


- Original Message - 
From: "Marcos Laufer" <[EMAIL PROTECTED]>
To: 
Sent: Thursday, June 28, 2007 3:56 PM
Subject: clamav on 3.9


Hi there,

I'm trying to install the newest clamav (0.90.3) on OpenBSD 3.9 . I updated
the
sources, and managed to compile it . But when i try to install the package i
get this error:

 pkg_add /usr/ports/packages/i386/all/clamav-0.90.3p0.tgz
Can't install /usr/ports/packages/i386/all/clamav-0.90.3p0.tgz: lib not
found idn.16.15
Even by looking in the dependency tree:
lha-1.14i.ac20050924, unzip-5.52, arc-5.21n, gmp-4.1.4p0,
libiconv-1.9.2p3, bzip2-1.0.3, curl-7.15.3, zoo-2.10.1p0
Maybe it's in a dependent package, but not tagged with @lib ?
(check with pkg_info -K -L)
If you are still running 3.6 packages, update them.

And libidn is installed :
 pkg_info |grep libid
libidn-0.6.1internationalized string handling

I read here http://www.mail-archive.com/[EMAIL PROTECTED]/msg11199.html
someone
had a similar problem and his solution was to update curl as well , but i
can't
upgrade it because i get another funky error:

/usr/local/bin/libtool  --tag=CC--mode=link
  -O2 -pipe   -L/usr/local/lib -o curl main.o hugehelp.o urlglob.o
writeout.o writeenv.o getpass.o  homedir.o curlutil.o strtoofft.o strdup.o
../lib/libcurl.la  -lz
mkdir .libs
cc -O2 -pipe -o .libs/curl main.o hugehelp.o urlglob.o writeout.o writeenv.o
getpass.o homedir.o curlutil.o strtoofft.o
strdup.o  -L/usr/local/lib -L../lib/.libs -lcurl -lcrypto -lssl -lidn -licon
v -lz -Wl,-rpath,/usr/local/lib
main.o(.text+0x2ff): In function `file2string':
: warning: strcpy() is almost always misused, please use strlcpy()
/usr/local/lib/libcurl.so.3.3: warning: sprintf() is often misused, please
use snprintf()
main.o(.text+0x68b1): In function `my_get_line':
: warning: strcat() is almost always misused, please use strlcat()
main.o(.text+0x4752): In function `operate':
: undefined reference to `curl_easy_escape'
collect2: ld returned 1 exit status
*** Error code 1
Stop in /u/system/ports/net/curl/w-curl-7.16.2/curl-7.16.2/src (line 358 of
Makefile).
*** Error code 1
Stop in /u/system/ports/net/curl/w-curl-7.16.2/curl-7.16.2/src (line 279 of
Makefile).
*** Error code 1
Stop in /u/system/ports/net/curl/w-curl-7.16.2/curl-7.16.2 (line 374 of
Makefile).
*** Error code 1
Stop in /u/system/ports/net/curl (line 1924 of
/usr/ports/infrastructure/mk/bsd.port.mk).

I'd appreciate any help on how to continue
Thanks!

clamav on 3.9

[Marcos Laufer]

Hi there,

I'm trying to install the newest clamav (0.90.3) on OpenBSD 3.9 . I updated
the
sources, and managed to compile it . But when i try to install the package i
get this error:

 pkg_add /usr/ports/packages/i386/all/clamav-0.90.3p0.tgz
Can't install /usr/ports/packages/i386/all/clamav-0.90.3p0.tgz: lib not
found idn.16.15
Even by looking in the dependency tree:
lha-1.14i.ac20050924, unzip-5.52, arc-5.21n, gmp-4.1.4p0,
libiconv-1.9.2p3, bzip2-1.0.3, curl-7.15.3, zoo-2.10.1p0
Maybe it's in a dependent package, but not tagged with @lib ?
(check with pkg_info -K -L)
If you are still running 3.6 packages, update them.

And libidn is installed :
 pkg_info |grep libid
libidn-0.6.1internationalized string handling

I read here http://www.mail-archive.com/[EMAIL PROTECTED]/msg11199.html
someone
had a similar problem and his solution was to update curl as well , but i
can't
upgrade it because i get another funky error:

/usr/local/bin/libtool  --tag=CC--mode=link
  -O2 -pipe   -L/usr/local/lib -o curl main.o hugehelp.o urlglob.o
writeout.o writeenv.o getpass.o  homedir.o curlutil.o strtoofft.o strdup.o
../lib/libcurl.la  -lz
mkdir .libs
cc -O2 -pipe -o .libs/curl main.o hugehelp.o urlglob.o writeout.o writeenv.o
getpass.o homedir.o curlutil.o strtoofft.o
strdup.o  -L/usr/local/lib -L../lib/.libs -lcurl -lcrypto -lssl -lidn -licon
v -lz -Wl,-rpath,/usr/local/lib
main.o(.text+0x2ff): In function `file2string':
: warning: strcpy() is almost always misused, please use strlcpy()
/usr/local/lib/libcurl.so.3.3: warning: sprintf() is often misused, please
use snprintf()
main.o(.text+0x68b1): In function `my_get_line':
: warning: strcat() is almost always misused, please use strlcat()
main.o(.text+0x4752): In function `operate':
: undefined reference to `curl_easy_escape'
collect2: ld returned 1 exit status
*** Error code 1
Stop in /u/system/ports/net/curl/w-curl-7.16.2/curl-7.16.2/src (line 358 of
Makefile).
*** Error code 1
Stop in /u/system/ports/net/curl/w-curl-7.16.2/curl-7.16.2/src (line 279 of
Makefile).
*** Error code 1
Stop in /u/system/ports/net/curl/w-curl-7.16.2/curl-7.16.2 (line 374 of
Makefile).
*** Error code 1
Stop in /u/system/ports/net/curl (line 1924 of
/usr/ports/infrastructure/mk/bsd.port.mk).

I'd appreciate any help on how to continue
Thanks!

Re: PPPoE MTU Problem

[Marcos Laufer]

Will , 

PPPoE needs a MTU of 1492 , i had the same problem with other values
Give it a try.

Marcos

- Original Message - 
From: "Will Jenkins" <[EMAIL PROTECTED]>
To: 
Sent: Friday, June 08, 2007 9:49 PM
Subject: Re: PPPoE MTU Problem


On 9 Jun 2007, at 00:11, Stuart Henderson wrote:

> On 2007/06/08 23:44, Jason McIntyre wrote:
>> On Fri, Jun 08, 2007 at 04:36:28PM +0100, Will Jenkins wrote:
>>>
>>> I've been experiencing some strange problems. I have a PPPoE/PPPoA
>>> bridging ethernet modem in the UK and am using userland ppp to  
>>> connect
>>> to my DSL provider.
>>>
>>> I have been setting MTU/MRU to 1458 in ppp.conf and have been  
>>> getting a
>>> *lot* of these messages:
>>>
>>> ppp[18688]: tun0: Error: ip_Input: deflink: wrote 1429, got  
>>> Message too long
>>>
>>
>> no answers for you, but here are some stuff i would mess with:
>>
>> - kernel pppoe(4) (much nicer ;)
>
> seconded, it works nicely on BT-based lines in .uk for me
> (some of the LLU providers only do PPPoA though).
>
> I found it a lot easier to get working than using ppp(8), and
> I'm not exactly new to ppp(8)...
>

I actually started with kernel pppoe and it worked great for two  
hours and then died inexplicably. The connection then refused to come  
up after repeated reboots which I found very strange. I went back to  
my Netgear for a few days and then tried OBSD again. This time the  
connection held for 5 days and died. Again repeated reboots wouldn't  
coax the connection back to life but my Netgear router worked fine. I  
thought I'd try userland ppp because my intuition leads me to believe  
it may be able to handle odd connection drops etc more robustly. Also  
I can't work out how to get any kind of logs from kernel pppoe.

Will

Re: mysql4

[Marcos Laufer]

I'm not sure that the reason mysql4 isn't in the packages is due to lack of
time
or resources..
There must be some other reason, i think this because everytime there are
more
and more packages, so removing one that so many people use is kind of weird.

I was thinking about upgrading (by making a fresh install) to 4.1 an old 3.4
webserver that also runs mysql4, and i had the intention of installing
mysql4 on
the new one so no modification on applications are needed.
I can't upgrade the users applications because this server runs at least
1000
websites , the users won't like to modifiy their code, and i am not a
programmer
neither.
But if it's not in the packages , i guess i should have to compile it myself
then.
I just wanted to know the real reason (maybe there is a security reason) of
why
mysql4 isn't included in packages anymore, not just a guess.

- Original Message - 
From: "Daniel Ouellet" <[EMAIL PROTECTED]>
To: 
Sent: Tuesday, June 05, 2007 11:46 PM
Subject: Re: mysql4


Marcos Laufer wrote:
> Hello there,
>
> I don't know if this has been asked or discussed before,..
>  here's no mysql4 packages in OpenBSD 4.1 . Why?

mysql-server-5.0.33.tgz

Is available. They do not have the resources to have every possible
version as packages, nor do they have the equipment to make all of them.
If you want a packages, as an example, 4.1 for i386 have the above ready
to go. I guess just upgrade your applications as you upgrade your OS,
why not.

mysql4

[Marcos Laufer]

Hello there,

I don't know if this has been asked or discussed before,..
 here's no mysql4 packages in OpenBSD 4.1 . Why?

Regards,
Marcos

Re: OpenBSD 4.1: pf is not blocking anything [solved]

[Marcos Laufer]

Hello ,

Just found out what was wrong. I knew that the ruleset was allright...
I just forgot to activate pf by placing pf=YES in rc.local.conf
I'm glad that OpenBSD works just fine, and it's me who needs to be repaired
:)

I am very sorry for the noise , thanks to everybody for the tips and advice

Marcos

- Original Message - 
From: "Peter N. M. Hansteen" <[EMAIL PROTECTED]>
To: "Marcos Laufer" <[EMAIL PROTECTED]>
Cc: 
Sent: Tuesday, May 22, 2007 8:23 AM
Subject: Re: OpenBSD 4.1: pf is not blocking anything


"Marcos Laufer" <[EMAIL PROTECTED]> writes:

> I am testing pf in an OpenBSD 4.1. This same configuration works
> fine on OpenBSD 3.9, but in 4.1 it is not filtering anything,
> everything is passing thru, just like as if there was no 'block
> all'.

Are you sure that your rule set actually does get loaded?

pfctl -s rules will show you which rules are loaded (a possible first
step), but syntax errors should show up (with line number indicated)
when you try to load your rules.

-- 
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
http://www.blug.linux.no/rfc1149/ http://www.datadok.no/ http://www.nuug.no/
"First, we kill all the spammers" The Usenet Bard, "Twice-forwarded tales"
delilah spamd[29949]: 85.152.224.147: disconnected after 42673 seconds.

OpenBSD 4.1: pf is not blocking anything

[Marcos Laufer]

Hello,

I am testing pf in an OpenBSD 4.1. This same configuration works fine on
OpenBSD 3.9, but in 4.1 it is not filtering anything, everything is passing
thru,
just like as if there was no 'block all'. What worries me most is that
anyone
on the outside can see my ssh service .
Is there anything wrong with the state of my rules? If i didn't
misunderstand ,
this rules should work just fine

Any ideas?
Thanks in advance,

Marcos


---
#
set skip on lo
scrub in
icmp_nets="{ 10.10.10.0/24 }"

block all

# good guys
table  persist
pass in quick on egress from  to any keep state

# blackhole
table  persist
block in quick log on egress from  to any

# no ipv6
block in quick inet6 all


##
# outgoing

# dns
pass out on egress proto { tcp, udp } from (self)/32 to any port domain
flags S/SA keep state

# smtp, http , https
pass out on egress proto tcp from (self)/32 to any port { smtp, www, https }
flags S/SA keep state

# ntp
ntp_servers="{ 10.10.10.4 }"
pass out on egress proto udp from (self)/32 to $ntp_servers port ntp keep
state

# ssh
ssh_friends="{ 10.10.10.0/24 }"
pass out on egress proto tcp from (self)/32 to $ssh_friends port ssh flags
S/SA keep state


# mysql
pass out on egress proto tcp from (self)/32 to any port 3306 flags S/SA keep
state

##
# incoming

# private
friends="{ 10.10.10.0/24 }"
friends_srvs="{ ftp, ftp-data, ssh }"
pass in on egress proto tcp from $friends to (self)/32 port $friends_srvs
flags S/SA keep state

# MySQL y PgSQL
sql_www_apps_srv="{ 10.10.10.0/24 }"
pass in quick proto tcp from $sql_www_apps_srv to self/32 port { 3306,
5432 } flags S/SA keep state

# icmp
pass in quick proto icmp from $icmp_nets to self/32 keep state

Re: ImageMagick and chroot

[Marcos Laufer]

Hello ,

The script just worked . Thanks a lot Aiko for that script, and thanks to 
everybody for  the suggestions and help. Now the convert command 
runs , and i can see the web application shows me an image where it
supposed to be showd, but i still have some errors though , but i 
guess they are about the programming of this web application . 
I know that on the old server (lionux)  it  worked just fine with 
the code as it is (php5), but maybe has to be changed because 
of the chroot , i don't know , i'll try to contact the programmer to 
let him see it .
 
Thanks ,
Marcos 

- Original Message - 
From: "Aiko Barz" <[EMAIL PROTECTED]>
To: "Marcos Laufer" <[EMAIL PROTECTED]>
Cc: 
Sent: Thursday, May 17, 2007 2:51 PM
Subject: Re: ImageMagick and chroot


: <[EMAIL PROTECTED]>

Marcos Laufer wrote:
> Hello ,
> 
> Has anyone had luck in making ImageMagick work into the www chroot
> environment?

Yes, run the following script and you are done.

#!/bin/sh


CHROOT="/var/www"


# Make dirs
[ ! -d "$CHROOT/bin" ]  && mkdir -p $CHROOT/bin
[ ! -d "$CHROOT/usr/local/bin" ]&& mkdir -p $CHROOT/usr/local/bin
[ ! -d "$CHROOT/usr/local/lib" ]&& mkdir -p $CHROOT/usr/local/lib
[ ! -d "$CHROOT/usr/lib" ]  && mkdir -p $CHROOT/usr/lib
[ ! -d "$CHROOT/usr/X11R6/lib" ]&& mkdir -p $CHROOT/usr/X11R6/lib/
[ ! -d "$CHROOT/usr/libexec" ]  && mkdir -p $CHROOT/usr/libexec
[ ! -d "$CHROOT/var/run" ]  && mkdir -p $CHROOT/var/run


SH="/bin/sh"
if [ -x $SH ]; then
cp -f $SH $CHROOT/$SH
else
echo "No shit. $SH not found! :)"
fi


LD_HINTS="/var/run/ld.so.hints"
if [ -f $LD_HINTS ]; then
cp $LD_HINTS $CHROOT/$LD_HINTS
else
echo "$LD_HINTS not found. Still wondering thou."
fi


CONVERT=$(which convert | awk '{print $1}')
if [ ! -z $CONVERT ] && [ -x $CONVERT ]; then
cp -f $CONVERT $CHROOT/$CONVERT
for i in $(ldd $CONVERT | awk '{if ($3 == "rlib") {print $7}}'); do
if [ -f $i ]; then
cp -f $i $CHROOT/$i
fi
done
else
echo "convert not found."
exit 1
fi


COMPOSITE=$(which composite | awk '{print $1}')
if [ ! -z $COMPOSITE ] && [ -x $COMPOSITE ]; then
cp -f $COMPOSITE $CHROOT/$COMPOSITE
for i in $(ldd $COMPOSITE | awk '{if ($3 == "rlib") {print $7}}'); do
if [ -f $i ]; then
cp -f $i $CHROOT/$i
fi
done
else
echo "composite not found."
exit 1
fi


IDENTIFY=$(which identify | awk '{print $1}')
if [ ! -z $IDENTIFY ] && [ -x $IDENTIFY ]; then
cp -f $IDENTIFY $CHROOT/$IDENTIFY
for i in $(ldd $IDENTIFY | awk '{if ($3 == "rlib") {print $7}}'); do
if [ -f $i ]; then
cp -f $i $CHROOT/$i
fi
done
else
echo "identify not found."
exit 1
fi

HTH,
Aiko
-- 
Aiko Barz <[EMAIL PROTECTED]>
Web: http://www.haeckser.de

ImageMagick and chroot

[Marcos Laufer]

Hello ,

Has anyone had luck in making ImageMagick work into the www chroot
environment?
Some web applications need to use the 'convert' system command, so i
included it
into the /var/www/bin/ directory and also every file that gets mentioned
when you
run : ldd convert , into it's corresponding directory.

system:/var/www/bin{4}# ldd convert
convert:
StartEnd  Type Open Ref GrpRef Name
  exe  10   0  convert
04d59000 24d68000 rlib 01   0
/usr/local/lib/libWand.so.10.1
0d077000 2d147000 rlib 02   0
/usr/local/lib/libMagick.so.10.1
05d92000 25dc5000 rlib 03   0  /usr/local/lib/libxml2.so.9.0
00d9 20e6c000 rlib 04   0
/usr/local/lib/libiconv.so.4.0
0b4b9000 2b4c1000 rlib 04   0  /usr/lib/libz.so.4.1
02e0c000 22e1 rlib 03   0  /usr/local/lib/libbz2.so.10.3
0c23c000 2c243000 rlib 03   0  /usr/local/lib/libpng.so.4.2
06a32000 26a38000 rlib 03   0
/usr/local/lib/libjpeg.so.62.0
04b0b000 24b1b000 rlib 03   0
/usr/local/lib/libjasper.so.1.0
032e1000 232e8000 rlib 05   0  /usr/lib/libm.so.2.1
060fb000 2611f000 rlib 03   0
/usr/local/lib/libtiff.so.37.3
0ee7e000 2ee89000 rlib 03   0
/usr/local/lib/liblcms.so.1.12
054f3000 254f9000 rlib 03   0  /usr/local/lib/libjbig.so.2.0
04183000 241b4000 rlib 01   0  /usr/lib/libc.so.39.0
0a2a3000 0a2a3000 rtld 01   0  /usr/libexec/ld.so
system:/var/www/bin{5}#

But it still doesn't work. What am i missing?
Any suggestions or ideas are welcome.

Marcos