Re: [newbie] Laptop hp ze4325us boot freeze solved on 10.1 community (acpi) and wlan--Thanks to all
A big thank you to all who helped me. I am sitting in my Lazyboy sending this from a linux box that for the first time since Mandrake 7.2 does everything I want it to do. I am going to enjoy this for a few weeks and then when I get 10.1 Official I will try breaking it by building a kernel with ACPI support and getting the built in ACX100 driver to work. I am currently using the Linuxant package and it works quite well and was easy to install. Pat Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Download HTTP?
On Wednesday 10 November 2004 02:24, Eric Scott wrote: Yo; does anybody know where I can download Mandrake 10.1 PPC via http instead of FTP? On the FTP mirrors I'm getting an average of about 9KB/s. That just won't do when download 2100MB of data. My satellite broadband has roughly a 600k down/4k up connection... .Yes, I said four up, not forty. I don't know if this would slow down an FTP connection, it doesn't make sense to me, but the point is it's download really really slow. Anyway, I'd like to try http or something instead of ftp, and helpers? What Sat service are you using? If it is directway, they have a thing called FAP that limits you to about 150 MB down load at full speed and then slows to a crawl. Most other sats have similar policies. I put up with this for years until I got DSL. If this is the case, the least frustrating solution is to order a se of disks from cheap bites or some other site that will ship them for a minimal charge. Check the fine print at your providers site or give them a call. Pat Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Laptop hp ze4325us boot freeze solved on 10.1 community (acpi)
Sounds similar to my Compaq 2100's issues. I was able to setup/load a custom DSDT, which solved the ACPI and related problems. (Although prism54 still doesn't work as I hit the usual, mfg changed internals but kept the same product number. Ndiswrapper works for me, from sourceforge.) Some help on setting up a DSDT: http://qa.mandrakesoft.com/twiki/bin/view/Main/HardwareHowTo#ACPI_Cust om_DSDT HTH, -- Stew Benedict Mandrakesoft Tried ndiswrapper had some problems. Am working on using the on board acx100_pci. If it doesn't work I will try it again. thanks for the acpi tip I will make that my next project. Currently I am trying the linuxant package and at least it fires up the card and lets me confgure it Once I get it running I will try an open source solution Thanks, Pat Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] browser identification
On Monday 08 Nov 2004 17:33, M.Schild wrote: I would be sorely tempted to change banks, but then. mine gives me no trouble Maryse A few days ago I was downloading Opera and in the things fixed page they mentioned the ability to connect to banks. Do not remember if this was Linux or windows version or if it was fixed or going to be fixed. Pat Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] Laptop hp ze4325us boot freeze solved on 10.1 community (acpi)
This did not seem to go through the first time. Fixed this and thought I would report it here and in twiki. HP ze4325us Athlon chip, Ali chipset, Radeon video. UNknown motherboard. This machine installed 10.0 great. Under 10.1 installs and freezes on reboot. I tried noapic noalpic noacpi nodma and none worked. What works is: linux acpi=off Once it boots add acpi=off to lilo. After I got it working I did a clean install. I found out that if you scroll down when you get to the final setup screen there is an entry for boot. Unchecking the acpi enabled button, solves the problem. Still cannot get a wireless card to work. It is recognized but does not seem to come on. I wi ask question after I have tried a few things but if anyone has any words of wisdom they will be welcome :-) Does anyone know if having acpi of effects wireless? Pat Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] Wireless wpc54g ver2
I hope some one can point me in the right direction. This card uses the TI chipset and is recognized on boot but does not load. From dmesg I collected the following: PCI: Enabling device :02:00.0 ( - 0002) PCI: Setting latency timer of device :02:00.0 to 64 acx100_probe_pci: WARNING: ACX111 support is highly experimental! Found ACX111-based wireless network card at :02:00.0, irq:10, phymem1:0x1082, phymem2:0x1080, mem1:0xcfb0f000, mem1_size:8192, mem2:0xcfb12000, mem2_size:131072. acx100_probe_pci: using ACX111 io resource addresses (size: 54) hw_unavailable = 1 acx_show_card_eeprom_id: EEPROM card ID string check found uninitialised card ID: this is a SpeedStream SS1021 or Gigafast WF721-AEX, no?? reset hw_unavailable++ acx100_reset_mac: enable soft reset... acx100_reset_mac: disable soft reset and go to init mode... ERROR: no directory for firmware file specified, ABORTING. Make sure to set module parameter 'firmware_dir'! (specified as absolute path!) acx100_reset_dev: Failed to upload firmware to the ACX111 acx100_probe_pci: TI acx_pci: MAC initialize failure! acx100_probe_pci: TI acx_pci.o: Ver 0.2.0pre8 Loading FAILED acx_pci: probe of :02:00.0 failed with error -5 It seems that the drivers are not being loaded but I am at a loss as to what script file calls them or where the drivers are. does anyone see any other problems I need toaddress? Thanks Pat Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Wireless wpc54g ver2
You need the proprietary firmware for your card from your Windows CD This HOWTO should help you http://www.houseofcraig.net/acx100_howto.php Firmware usually goes in /lib/hotplug/firmware in Mandrake although the HOWTO mentions a different location. derek -- www.jennings.homelinux.net http://twiki.mdklinuxfaq.org Thanks I will look it up and try it. I thought it might be something like that but I could not find anything that said so. Let you know how i goes thanks again Pat Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Wireless wpc54g ver2
On 7 Nov 2004 at 18:07, Sevatio wrote: Have you looked at ndiswrapper? Yes and have had problems wit it due to ignorance i am sure :) Since this card has native support in 10.1 I want to try that first Thanks, Pat ps going to jump into what Derrick suggested in another post will report back Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Wireless Lan on 10.0
On Wednesday 14 July 2004 02:29 pm, Kevin Ferguson wrote: Pat Patterson wrote: On Tuesday 13 July 2004 10:13 am, Kevin Ferguson wrote: Hi Mate Try this this link http://sourceforge.net/projects/acx100/ I have a dwl 520+ got it working on 9.1 but not on mandrake 10. Also try this link too which will help http://www.houseofcraig.net/acx100_howto.php. I've yet to find a wireless card that works straight away. I use a netgear ma401ra pcmcia on my dell inspiron 4000 that works fine but needs a little tweaking. Hope the above links will be of some assistance. Regards Kevin Hi Kevin, Thanks but the dwlg650 use the Atheros chip. The howto did have some good info in it though. I am also trying to use a dwl130e as a result. It loads and configures but I have not been able to connect with it either. I will work on it some more tomorrow. Thanks, Pat Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com Hi Pat How far have you gotten with the card so far? Hi Kevin, Last night I got the dwl 120 e configured with minimal problems. I should have worked but it did not. This evening I did a little more research and discovered that the atmel module does not work in the 2.6 kernel. I switched to the 2.4 and it came right up. I found a patch for 2.6 which I will apply as soon as I figure out how to apply a patch ;-) This at least gets me out of my office and into my Lazy-Boy to do email and news groups even if I have to drag a USB adapter with me. I am a happy camper. On to printing, samba, but for now I have my first totally usable Mandrake machine since I started playing wth 7.2 Hurrah!!! I will go back to the DWL g650 card once I have stopped gloating and have actully gotten a full weeks worth of real work done under Mandrake. Thanks for the help, Pat Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Wireless Lan on 10.0
On Wednesday 14 July 2004 04:16 am, graham wrote: I am using a dwlg520+ with mdk10 official and have had no problems with it. Easy to set up - just have to remove the ndiswrapper.ko that mdk instals and install ver 0.6. try http://ndiswrapper.sourceforge.net/ for more info. Graham Thanks Graham.I will try it. For now I have a usb wireless that I got working and I will follow up on your suggestion as soon as I get a couple other things workng. Pat Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Wireless Lan on 10.0
On Tuesday 13 July 2004 10:13 am, Kevin Ferguson wrote: Hi Mate Try this this link http://sourceforge.net/projects/acx100/ I have a dwl 520+ got it working on 9.1 but not on mandrake 10. Also try this link too which will help http://www.houseofcraig.net/acx100_howto.php. I've yet to find a wireless card that works straight away. I use a netgear ma401ra pcmcia on my dell inspiron 4000 that works fine but needs a little tweaking. Hope the above links will be of some assistance. Regards Kevin Hi Kevin, Thanks but the dwlg650 use the Atheros chip. The howto did have some good info in it though. I am also trying to use a dwl130e as a result. It loads and configures but I have not been able to connect with it either. I will work on it some more tomorrow. Thanks, Pat Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] Wireless Lan on 10.0
I have installed 10.0 on my hp ze4325us laptop and the basic install was great. Video, sound, wired lan all working out of the box. I have not messed with samba or printing yet but I am working on getting DWLG650 card to work. I have found and ollowed several howtos and managed to update the kernel and install the modules. I have created the network script and have added alias ath0 ath_pci to modules.conf and modprobe. During startup I get the message the Ath0_pci cannot find the hardware. ineither ifconfig or iwconfig show the ath0. dmesg give me the following: ath_hal: no version for struct_module found: kernel tainted. ath_hal: module license 'Proprietary' taints kernel. ath_hal: No versions for exported symbols. Tainting kernel. ath_hal: 0.9.5.3 BETA (Sam Leffler [EMAIL PROTECTED]) wlan: No versions for exported symbols. Tainting kernel. wlan: 0.7.1.1 BETA (Sam Leffler [EMAIL PROTECTED]) ath_pci: 0.8.3.2 BETA (Sam Leffler [EMAIL PROTECTED]) PCI: Enabling device :02:00.0 ( - 0002) ath_pci: cache line size not set; forcing 8 ath%d: unable to attach hardware; HAL status 13 Can anyone point me to what to do next? Is there a wireless G card out there that you can just pop in and go? Thanks, Pat Patterson Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] 3Com Gigabit Ethernet 3C940 supported?
I have a ASUS P4P800 Motherboard with a built-in Gigabit Ethernet Adapter Model and Chipset 3Com 3c940. Autodetection doesn't work and even selecting it manually doesn't work, because it's not in the list and all other available 3Com models won't work. Does anyone by any chance know how to let this Ethernet Adapter work under Mandrake? (I have 9.0 installed, but in the Mandrake Database 3C940 is not even mentioned for Mandrake 9.2, so upgrading wouldn't help I'm afraid. I hAD the same situation few months ago. installed the 3com drivers and all seemed well. Then had many strange problems trying to enable samba and network printing. Found the drivers sort of work but not totally. Like Tom I tossed in a dlink and the problems disappeared. Pat Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] smbclient problem on 9.2 solved- It was the NIC
At 08:15 AM 12/18/2003 +, you wrote: On Thursday 18 Dec 2003 1:54 am, Pat Patterson wrote: I have been trying to get samba fully functional for a couple of months now and it has been driving me crazy. My internet connection worked. The Samba server worked but for some unknown reason that I researched thoroughly, only some of the machines on my network could be reached from the linux box. Finally just for the heck of it I disabled the onboard nic (ASUS a7v600-3COM 3C940 )and put in another. I was so proud of the on board nic because it was my first attempt at installing something that was not in RPM form. Oh well. Anyhow, this is a great board for linux but the Asus supplied 3com2000 driver is either partially bad or I did not install it right. Thought I would just add this to the record for future reference for others. I think it may be helpful to have a note about this on the TWiki - http://mandrake.vmlinuz.ca/bin/view/Main/MotherBoards and also a link made from the FiveStarNews page. Can you do that, please? Anne -- Registered Linux User No.293302 Have you visited http://twiki.mdklinuxfaq.org yet? Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Anne, I added it to the twiki page but I am not familiar with FiveStar. Pat Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] smbclient problem on 9.2 solved- It was the NIC
At 12:32 PM 12/18/2003 -0600, you wrote: It's becoming more an more frequent to see success stories with 3c940's, but 3com support has always lagged in the past and this is a new NIC. It appears that the sk98lin driver is winning out, as this NIC uses a chipset furnished by SysKonnect, not 3com. http://www.syskonnect.com/ -- Tom Brinkman Corpus Christi, Texas Thanks Tom. I will try it once I get printing, radeon 9200, scanner, and a few other things working. Have you tried the SATA yet? I just added a 200 gig maxtor and it works fine under win2k but I have not even contemplated getting it going under 9.2. It was not recognized by harddrake and I assume for now from the little searching I have done that drivers are not yet available. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] smbclient problem on 9.2 solved- It was the NIC
I have been trying to get samba fully functional for a couple of months now and it has been driving me crazy. My internet connection worked. The Samba server worked but for some unknown reason that I researched thoroughly, only some of the machines on my network could be reached from the linux box. Finally just for the heck of it I disabled the onboard nic (ASUS a7v600-3COM 3C940 )and put in another. I was so proud of the on board nic because it was my first attempt at installing something that was not in RPM form. Oh well. Anyhow, this is a great board for linux but the Asus supplied 3com2000 driver is either partially bad or I did not install it right. Thought I would just add this to the record for future reference for others. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] A thank you for Kaj and an apology to Derek Jennings
Kaj, It might have been obvious to others but until you pointed out the proper URL I have been frequently frustrated trying to search for Mandrake info in the archives. Thanks. While conducting my very first search for an SMBCLIENT problem I have been trying to solve for several months I discovered my own posting from November and the fact that Derek was kind enough to answer and I never saw his response since some how I got booted off the group for about a week. I still have the problem and unfortunately Derek's suggestion which I found last night did not solve it. I will post the details in a separate note and hope that Derek and anyone else will be able to help since I have not been able to find any info on it any where. Once again thanks Kaj, Derek, and all of you who contribute. I have found that for the most part by being an avid lurker most of my question get answered over time. Pat Patterson Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Smbclient lm9.2
I have been setting up 9.2 and it has been going pretty well but I am having a Samba problem. I can access the linux box from all of my other machines a mix of w98, w2k, and a laptop with XP home. My problem is with accessing some of the other machines from linux. I have lisa running. It will find all the machines. pwpatter (itself) hp (laptop with xp) jp (w2k and my gateway) shop (w99se/lm9.2). I can browse pwpatter,hp, and shop running lm9.2. jp and shop running w98 get a message unknown host from shop I can access jp with lisa. I have checked and rechecked passwords in linux and samba. I can ping by name and number. I have logged in on both machines with the user and password that works on hp. What am I missing?? Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [newbie] Radeon 9000, xwindows and Mandrake 9.0
I had the same problem same card the first time I loaded 9.0. However, the second time around I did a clean install and went with the vesa driver which it defaulted to and it runs great. No tux racer etc but for normal stuff it works fine. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com