subject:"\[qmailtoaster\] Re\: error"

Re: [qmailtoaster] Re: Error on greeting

2022-02-07 Thread Andreas Galatis


Hi Eric,

they told me they couldn't delist my IP because on the website unet.de 
was no legal information of the owner.


They need:
1. Servername indicating purpose of the server (mail.unet.de should be ok)
2. ip-address resolving to servername (ptr-record = mail.unet.de)
3. legal  info about owner (fixed)

and then it takes time to get it on the whitelist.
The address to contact them is: postmas...@rx.t-online.de

I did the same for microsoft (outlook...)



Am 07.02.22 um 15:16 schrieb Eric Broch:

Did you contact rx.t-online.de ? I'd be interested in what they say.

On 2/7/2022 12:29 AM, Andreas Galatis wrote:

Hi,

when sending out mails to t-online I get the following message:

Connected to 194.25.134.8 but greeting failed.
Remote host said: 554 IP=85.10.201.91 - A problem occurred. (Ask your 
postmaster for help or to contactt...@rx.t-online.de  to clarify.)


Does anybody have an idea?

Andreas



-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com





OpenPGP_signature
Description: OpenPGP digital signature

[qmailtoaster] Re: Error on greeting

2022-02-07 Thread Eric Broch


Did you contact rx.t-online.de ? I'd be interested in what they say.

On 2/7/2022 12:29 AM, Andreas Galatis wrote:

Hi,

when sending out mails to t-online I get the following message:

Connected to 194.25.134.8 but greeting failed.
Remote host said: 554 IP=85.10.201.91 - A problem occurred. (Ask your 
postmaster for help or to contactt...@rx.t-online.de  to clarify.)


Does anybody have an idea?

Andreas



-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: error 256

2015-11-13 Thread MaddMacc


Further checking logs,
/var/log/qmail/smtp
*tcpserver: fatal: unable to figure out port number for smtp*

So I run: qmailctlstat

clamd: up (pid 994) 100 seconds
send: up (pid 996) 100 seconds
*smtp: up (pid 1816) 1 seconds*
spamd: up (pid 990) 100 seconds
submission: up (pid 989) 100 seconds
clamd/log: up (pid 995) 100 seconds
send/log: up (pid 992) 100 seconds
smtp/log: up (pid 998) 100 seconds
spamd/log: up (pid 991) 100 seconds
submission/log: up (pid 993) 100 seconds

Run it a few seconds later and :

smtp: up (pid 1999)*0 seconds*

I can run:
telnet localhost 587 ,, correctly shows info

but:
telnet localhost 25 ,, connection refused

Cheers
MaddMacc

[qmailtoaster] Re: Error: mail receiving issue from qmail list

2013-12-13 Thread Eric Shubert


On 12/13/2013 04:17 AM, Linux wrote:

12-13 16:42:29 CHKUSER accepted sender: from

remote  rcpt <> : sender
accepted

12-13 16:42:29 qmail-smtpd: spf-reject: HELO(mail.qmailtoaster.com) from
162.213.42.64.
MAILFROM:qmailtoaster-list-return-15435-linux=ikf.co...@qmailtoaster.com

12-13 16:42:29 spamdyke[12461]: DENIED_OTHER from:
qmailtoaster-list-return-15435-linux=ikf.co...@qmailtoaster.com to:
li...@ikf.co.in origin_ip: 162.213.42.64 origin_rdns:
smtp.edgeneering.com auth: (unknown) encryption: TLS reason:
550_See_http://spf.pobox.com/why.html?sender=qmailtoaster-list-return-15435-linux%3dikf.co.in%40qmailtoaster.com&ip=162.213.42.64&receiver=webmail.ikf.co.in_(#5.7.1)



Looks like an SPF problem. Please relax your spfbehavior from 3 to 1 
while we get this fixed. I know what the problem is, but it may take a 
few days for us to get it entirely fixed properly.


--
-Eric 'shubes'


-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: Error installing qmail on COS 6.4

2013-11-11 Thread Eric Shubert


What command was issued that produced this?
I've no idea what you're doing. Which directions are you following?
--
-Eric 'shubes'

On 11/10/2013 08:11 PM, Amit Dalia wrote:

Now error in spamassassin:

Preparing...###
[100%]

1:spamassassin-toaster   ### [100%]

Can't locate NetAddr/IP.pm in @INC (@INC contains:
/usr/share/perl5/vendor_perl /usr/local/lib64/perl5
/usr/local/share/perl5 /usr/lib64/perl5/vendor_perl /usr/lib64/perl5
/usr/share/perl5) at
/usr/share/perl5/vendor_perl/Mail/SpamAssassin/NetSet.pm line 25.

BEGIN failed--compilation aborted at
/usr/share/perl5/vendor_perl/Mail/SpamAssassin/NetSet.pm line 25.

Compilation failed in require at
/usr/share/perl5/vendor_perl/Mail/SpamAssassin/Conf.pm line 86.

BEGIN failed--compilation aborted at
/usr/share/perl5/vendor_perl/Mail/SpamAssassin/Conf.pm line 86.

Compilation failed in require at
/usr/share/perl5/vendor_perl/Mail/SpamAssassin.pm line 71.

BEGIN failed--compilation aborted at
/usr/share/perl5/vendor_perl/Mail/SpamAssassin.pm line 71.

Compilation failed in require at /usr/bin/sa-update line 92.

BEGIN failed--compilation aborted at /usr/bin/sa-update line 92.

sa-update return code 2

simscan versions cdb file built. /var/qmail/control/simversions.cdb

simscan cdb file built. /var/qmail/control/simcontrol.cdb

-Amit



http://iknowledgefactory.com/ikf_email/line_r.jpg



http://iknowledgefactory.com/ikf_email/ikf_logo.jpg <http://ikf.co.in/>



http://iknowledgefactory.com/ikf_email/line_r.jpg



http://iknowledgefactory.com/ikf_email/facebook.jpg
<http://www.facebook.com/IKFPune>

http://iknowledgefactory.com/ikf_email/linkedin.jpg
<http://www.linkedin.com/company/i-knowledge-factory-pvt.-ltd.>

*From:*Eric Shubert [mailto:e...@shubes.net]
*Sent:* 10 November 2013 08:24
*To:* Amit Dalia
*Subject:* Re: [qmailtoaster] Re: Error installing qmail on COS 6.4

I think there are more recent posts than that regarding COS6.
Please keep replies on list.
Thanks.

--

-Eric 'shubes'


On 11/09/2013 01:02 PM, Amit Dalia wrote:

Installing from below thread:

http://www.mail-archive.com/qmailtoaster-list@qmailtoaster.com/msg31759.html


 Original Message 
From: "Eric Shubert"  <mailto:e...@shubes.net>
To: qmailtoaster-list@qmailtoaster.com
<mailto:qmailtoaster-list@qmailtoaster.com>
    Sent: Sat, Nov 9, 2013, 06:26 PM
Subject: [qmailtoaster] Re: Error installing qmail on COS 6.4


On 11/08/2013 10:57 PM, Amit Dalia wrote:

Hi,

Getting below error while installing QMT on COS 6.

Try `/root/rpmbuild/BUILD/vqadmin-2.3.7/missing --help' for
more information
configure: WARNING: `missing' script is too old or missing
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking build system type... Invalid configuration
`x86_64-redhat-linux-gnu': machine `x86_64-redhat-linux' not
recognized
configure: error: /bin/sh ../config.sub
x86_64-redhat-linux-gnu failed
error: Bad exit status from /var/tmp/rpm-tmp.Lgk6Yd (%build)

RPM build errors:
user shubes does not exist - using root
group shubes does not exist - using root
user shubes does not exist - using root
group shubes does not exist - using root
user shubes does not exist - using root
group shubes does not exist - using root
user shubes does not exist - using root
group shubes does not exist - using root
user shubes does not exist - using root
group shubes does not exist - using root
user shubes does not exist - using root
group shubes does not exist - using root
Bad exit status from /var/tmp/rpm-tmp.Lgk6Yd (%build)
error: File not found by glob:
/usr/src/redhat/RPMS/i386/vqadmin-toaster*.rpm

-- Amit



Which script(s) are you using to build?
qtp-newmodel might work. No guarantees though yet. I'm working
on it.

--
-Eric 'shubes'

-
To unsubscribe, e-mail:
qmailtoaster-list-unsubscr...@qmailtoaster.com
<mailto:qmailtoaster-list-unsubscr...@qmailtoaster.com>
For additional commands, e-mail:
qmailtoaster-list-h...@qmailtoaster.com
<mailto:qmailtoaster-list-h...@qmailtoaster.com>




<http://www.avast.com/>   

This email is free from viruses and malware because avast! Antivir

RE: [qmailtoaster] Re: Error installing qmail on COS 6.4

2013-11-10 Thread Amit Dalia

Now error in spamassassin:



Preparing...### [100%]

1:spamassassin-toaster   ### [100%]

Can't locate NetAddr/IP.pm in @INC (@INC contains: /usr/share/perl5/vendor_perl 
/usr/local/lib64/perl5 /usr/local/share/perl5 /usr/lib64/perl5/vendor_perl 
/usr/lib64/perl5 /usr/share/perl5) at 
/usr/share/perl5/vendor_perl/Mail/SpamAssassin/NetSet.pm line 25.

BEGIN failed--compilation aborted at 
/usr/share/perl5/vendor_perl/Mail/SpamAssassin/NetSet.pm line 25.

Compilation failed in require at 
/usr/share/perl5/vendor_perl/Mail/SpamAssassin/Conf.pm line 86.

BEGIN failed--compilation aborted at 
/usr/share/perl5/vendor_perl/Mail/SpamAssassin/Conf.pm line 86.

Compilation failed in require at 
/usr/share/perl5/vendor_perl/Mail/SpamAssassin.pm line 71.

BEGIN failed--compilation aborted at 
/usr/share/perl5/vendor_perl/Mail/SpamAssassin.pm line 71.

Compilation failed in require at /usr/bin/sa-update line 92.

BEGIN failed--compilation aborted at /usr/bin/sa-update line 92.

sa-update return code 2

simscan versions cdb file built. /var/qmail/control/simversions.cdb

simscan cdb file built. /var/qmail/control/simcontrol.cdb





-  Amit







 <http://ikf.co.in/>




 <http://www.facebook.com/IKFPune>


 <http://www.linkedin.com/company/i-knowledge-factory-pvt.-ltd.>








From: Eric Shubert [mailto:e...@shubes.net]
Sent: 10 November 2013 08:24
To: Amit Dalia
Subject: Re: [qmailtoaster] Re: Error installing qmail on COS 6.4



I think there are more recent posts than that regarding COS6.
Please keep replies on list.
Thanks.



--
-Eric 'shubes'


On 11/09/2013 01:02 PM, Amit Dalia wrote:

Installing from below thread:



http://www.mail-archive.com/qmailtoaster-list@qmailtoaster.com/msg31759.html

 Original Message 
From: "Eric Shubert"  <mailto:e...@shubes.net> 
To: qmailtoaster-list@qmailtoaster.com 
<mailto:qmailtoaster-list@qmailtoaster.com>
Sent: Sat, Nov 9, 2013, 06:26 PM
Subject: [qmailtoaster] Re: Error installing qmail on COS 6.4


On 11/08/2013 10:57 PM, Amit Dalia wrote:

Hi,

Getting below error while installing QMT on COS 6.

Try `/root/rpmbuild/BUILD/vqadmin-2.3.7/missing --help' for more information
configure: WARNING: `missing' script is too old or missing
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking build system type... Invalid configuration
`x86_64-redhat-linux-gnu': machine `x86_64-redhat-linux' not recognized
configure: error: /bin/sh ./config.sub x86_64-redhat-linux-gnu failed
error: Bad exit status from /var/tmp/rpm-tmp.Lgk6Yd (%build)

RPM build errors:
user shubes does not exist - using root
group shubes does not exist - using root
user shubes does not exist - using root
group shubes does not exist - using root
user shubes does not exist - using root
group shubes does not exist - using root
user shubes does not exist - using root
group shubes does not exist - using root
user shubes does not exist - using root
group shubes does not exist - using root
user shubes does not exist - using root
group shubes does not exist - using root
Bad exit status from /var/tmp/rpm-tmp.Lgk6Yd (%build)
error: File not found by glob:
/usr/src/redhat/RPMS/i386/vqadmin-toaster*.rpm

-- Amit



Which script(s) are you using to build?
qtp-newmodel might work. No guarantees though yet. I'm working on it.

--
-Eric 'shubes'

-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com 
<mailto:qmailtoaster-list-unsubscr...@qmailtoaster.com>
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com 
<mailto:qmailtoaster-list-h...@qmailtoaster.com>





---
This email is free from viruses and malware because avast! Antivirus protection 
is active.
http://www.avast.com
<><><><>

[qmailtoaster] Re: Error installing qmail on COS 6.4

2013-11-09 Thread Eric Shubert


On 11/08/2013 10:57 PM, Amit Dalia wrote:

Hi,

Getting below error while installing QMT on COS 6.

Try `/root/rpmbuild/BUILD/vqadmin-2.3.7/missing --help' for more information
configure: WARNING: `missing' script is too old or missing
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking build system type... Invalid configuration
`x86_64-redhat-linux-gnu': machine `x86_64-redhat-linux' not recognized
configure: error: /bin/sh ./config.sub x86_64-redhat-linux-gnu failed
error: Bad exit status from /var/tmp/rpm-tmp.Lgk6Yd (%build)


RPM build errors:
 user shubes does not exist - using root
 group shubes does not exist - using root
 user shubes does not exist - using root
 group shubes does not exist - using root
 user shubes does not exist - using root
 group shubes does not exist - using root
 user shubes does not exist - using root
 group shubes does not exist - using root
 user shubes does not exist - using root
 group shubes does not exist - using root
 user shubes does not exist - using root
 group shubes does not exist - using root
 Bad exit status from /var/tmp/rpm-tmp.Lgk6Yd (%build)
error: File not found by glob:
/usr/src/redhat/RPMS/i386/vqadmin-toaster*.rpm

-- Amit


Which script(s) are you using to build?
qtp-newmodel might work. No guarantees though yet. I'm working on it.

--
-Eric 'shubes'


-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: error installing qmailtoaster plus

2013-11-07 Thread Eric Shubert


# yum update qmailtoaster-plus

On 11/07/2013 05:21 PM, Rajesh M wrote:

eric

on a close study i noted the following

i had already installed qmailtoaster-plus once earlier a long time ago.

however the files in the folder /opt/qmailtoaster-plus/bin are dated 2010

on my other servers these are dated 2012

also the sanesecurity download on my other servers is from sourceforge
whereas in this server it is trying to download from http://inetmsg.com/
which no longer exists

further i downloaded qtp-install-sanesecurity file from the website using
wget http://qtp.qmailtoaster.com/trac/export/175/bin/qtp-install-sanesecurity

and installed it :  sh ./qtp-install-sanesecurity and it got installed
successfully

1) the question is can i uninstall and reinstall qmailtoaster-plus without
affecting my qmailtoaster installation -- this is a live mailserver

2) how do i do it

thanks as always,

rajesh



On 11/07/2013 08:32 AM, Rajesh M wrote:

Saving to:
`/tmp/qtp-install-sanesecurity.21461/clamav-unofficial-sigs.tar.gz'

100%[==>]
2,289   --.-K/s   in 0s

2013-11-07 20:50:00 (271 MB/s) -
`/tmp/qtp-install-sanesecurity.21461/clamav-unofficial-sigs.tar.gz'
saved
[2289/2289]


gzip: stdin: not in gzip format
tar: Child returned status 1


Looks like the download was unsuccessful. I would try again.

--
-Eric 'shubes'


-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com









-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com





--
-Eric 'shubes'


-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Re: error installing qmailtoaster plus

2013-11-07 Thread Rajesh M

eric

on a close study i noted the following

i had already installed qmailtoaster-plus once earlier a long time ago.

however the files in the folder /opt/qmailtoaster-plus/bin are dated 2010

on my other servers these are dated 2012

also the sanesecurity download on my other servers is from sourceforge
whereas in this server it is trying to download from http://inetmsg.com/
which no longer exists

further i downloaded qtp-install-sanesecurity file from the website using
wget http://qtp.qmailtoaster.com/trac/export/175/bin/qtp-install-sanesecurity

and installed it :  sh ./qtp-install-sanesecurity and it got installed
successfully

1) the question is can i uninstall and reinstall qmailtoaster-plus without
affecting my qmailtoaster installation -- this is a live mailserver

2) how do i do it

thanks as always,

rajesh


> On 11/07/2013 08:32 AM, Rajesh M wrote:
>> Saving to:
>> `/tmp/qtp-install-sanesecurity.21461/clamav-unofficial-sigs.tar.gz'
>>
>> 100%[==>]
>> 2,289   --.-K/s   in 0s
>>
>> 2013-11-07 20:50:00 (271 MB/s) -
>> `/tmp/qtp-install-sanesecurity.21461/clamav-unofficial-sigs.tar.gz'
>> saved
>> [2289/2289]
>>
>>
>> gzip: stdin: not in gzip format
>> tar: Child returned status 1
>
> Looks like the download was unsuccessful. I would try again.
>
> --
> -Eric 'shubes'
>
>
> -
> To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
>
>






-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: error installing qmailtoaster plus

2013-11-07 Thread Eric Shubert


On 11/07/2013 08:32 AM, Rajesh M wrote:

Saving to:
`/tmp/qtp-install-sanesecurity.21461/clamav-unofficial-sigs.tar.gz'

100%[==>]
2,289   --.-K/s   in 0s

2013-11-07 20:50:00 (271 MB/s) -
`/tmp/qtp-install-sanesecurity.21461/clamav-unofficial-sigs.tar.gz' saved
[2289/2289]


gzip: stdin: not in gzip format
tar: Child returned status 1


Looks like the download was unsuccessful. I would try again.

--
-Eric 'shubes'


-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: Error - no authentication database connection.Initial open.

2012-10-23 Thread Eric Shubert


On 10/23/2012 11:16 AM, Giuseppe Perna wrote:

thanks eric, you really are a genius.
now it all works.
where can I find the meaning of these terms?

CHKUSER___RCPTLIMIT=
CHKUSER___WRONGRCPTLIMIT
NOP0FCHECK=

thanks


CHKUSER is a qmail patch written by our friend Antonio Nati. 
Documentation is here: http://opensource.interazioni.it/


NOP0FCHECK is a patch that I don't recall off hand where it came from. I 
need to get a reference for that in the spec info. Please google it.


--
-Eric 'shubes'



2012/10/23 Eric Shubert mailto:e...@shubes.net>>

You should have as the 2nd line in tcp.smtp:

:allow,BADMIMETYPE="",__BADLOADERTYPE="M",CHKUSER___RCPTLIMIT="50",CHKUSER___WRONGRCPTLIMIT="10",__QMAILQUEUE="/var/qmail/bin/__simscan",NOP0FCHECK="1"

Change it, then run
# service qmail cdb

--
-Eric 'shubes'


On 10/23/2012 12:01 AM, Giuseppe Perna wrote:

Thanks eric for you replay,
this output:
cat /var/qmail/control/simcontrol
:clam=yes,spam=yes,spam_hits=__12,attach=.mp3:.src:.bat:.pif

cat /etc/tcprules.d/tcp.smtp

127.:allow,RELAYCLIENT="",__DKSIGN="/var/qmail/control/__domainkeys/%/private"

:allow,BADMIMETYPE="",__BADLOADERTYPE="M",CHKUSER___RCPTLIMIT="50",CHKUSER___WRONGRCPTLIMIT="10",DKSIGN="/__var
/qmail/control/domainkeys/%/__private"


i have test the configuration but not fuction.
thanks

i have run /etc/init.d/qmail cdb





-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Re: Error - no authentication database connection.Initial open.

2012-10-23 Thread Giuseppe Perna

thanks eric, you really are a genius.
now it all works.
where can I find the meaning of these terms?

CHKUSER_**RCPTLIMIT=
CHKUSER_**WRONGRCPTLIMIT
NOP0FCHECK=

thanks


2012/10/23 Eric Shubert 

> You should have as the 2nd line in tcp.smtp:
> :allow,BADMIMETYPE="",**BADLOADERTYPE="M",CHKUSER_**
> RCPTLIMIT="50",CHKUSER_**WRONGRCPTLIMIT="10",**QMAILQUEUE="/var/qmail/bin/
> **simscan",NOP0FCHECK="1"
>
> Change it, then run
> # service qmail cdb
>
> --
> -Eric 'shubes'
>
>
> On 10/23/2012 12:01 AM, Giuseppe Perna wrote:
>
>> Thanks eric for you replay,
>> this output:
>> cat /var/qmail/control/simcontrol
>> :clam=yes,spam=yes,spam_hits=**12,attach=.mp3:.src:.bat:.pif
>>
>> cat /etc/tcprules.d/tcp.smtp
>> 127.:allow,RELAYCLIENT="",**DKSIGN="/var/qmail/control/**
>> domainkeys/%/private"
>> :allow,BADMIMETYPE="",**BADLOADERTYPE="M",CHKUSER_**
>> RCPTLIMIT="50",CHKUSER_**WRONGRCPTLIMIT="10",DKSIGN="/**var
>>/qmail/control/domainkeys/%/**private"
>>
>>
>> i have test the configuration but not fuction.
>> thanks
>>
>> i have run /etc/init.d/qmail cdb
>> 2012/10/22 Eric Shubert mailto:e...@shubes.net>>
>>
>>
>> Looks as though clamd's running ok. Next thing to check would be
>> simscan.
>>
>> Let's have a look at:
>> # cat /var/qmail/control/simcontrol
>> # cat /etc/tcprules.d/tcp.smtp
>>
>> Have you run "service qmail cdb" recently?
>> This needs to be run whenever the above 2 (and a few others) are
>> changed.
>>
>> --
>> -Eric 'shubes'
>>
>>
>> On 10/22/2012 12:09 PM, Giuseppe Perna wrote:
>>
>> thanks for your replay.
>> i have upgrade the server with qtp-newmodel.
>> i read this :
>> # qmlog -t 50 clamd
>> 10-22 19:19:26 MaxQueue set to: 100
>> 10-22 19:29:26 No stats for Database check - forcing reload
>> 10-22 19:29:26 Reading databases from /usr/share/clamav
>> 10-22 19:29:30 Database correctly reloaded (1316654 signatures)
>> 10-22 19:34:32 Waiting for all threads to finish
>> 10-22 19:34:59 Limits: Global size limit set to 104857600 bytes.
>> 10-22 19:34:59 Limits: File size limit set to 26214400 bytes.
>> 10-22 19:34:59 Limits: Recursion level limit set to 16.
>> 10-22 19:34:59 Limits: Files limit set to 1.
>> 10-22 19:34:59 Limits: Core-dump limit is 0.
>> 10-22 19:34:59 Archive support enabled.
>> 10-22 19:34:59 Algorithmic detection enabled.
>> 10-22 19:34:59 Portable Executable support enabled.
>> 10-22 19:34:59 ELF support enabled.
>> 10-22 19:34:59 Mail files support enabled.
>> 10-22 19:34:59 OLE2 support enabled.
>> 10-22 19:34:59 PDF support enabled.
>> 10-22 19:34:59 HTML support enabled.
>> 10-22 19:34:59 Self checking every 600 seconds.
>> 10-22 19:34:59 Listening daemon: PID: 19817
>> 10-22 19:34:59 MaxQueue set to: 100
>> 10-22 19:44:59 No stats for Database check - forcing reload
>> 10-22 19:44:59 Reading databases from /usr/share/clamav
>> 10-22 19:45:03 Database correctly reloaded (1316655 signatures)
>> 10-22 19:55:03 SelfCheck: Database status OK.
>> 10-22 20:05:03 SelfCheck: Database status OK.
>> 10-22 20:05:34 Waiting for all threads to finish
>> 10-22 20:06:54 Limits: Global size limit set to 104857600 bytes.
>> 10-22 20:06:54 Limits: File size limit set to 26214400 bytes.
>> 10-22 20:06:54 Limits: Recursion level limit set to 16.
>> 10-22 20:06:54 Limits: Files limit set to 1.
>> 10-22 20:06:54 Limits: Core-dump limit is 0.
>> 10-22 20:06:54 Archive support enabled.
>> 10-22 20:06:54 Algorithmic detection enabled.
>> 10-22 20:06:54 Portable Executable support enabled.
>> 10-22 20:06:54 ELF support enabled.
>> 10-22 20:06:54 Mail files support enabled.
>> 10-22 20:06:54 OLE2 support enabled.
>> 10-22 20:06:54 PDF support enabled.
>> 10-22 20:06:54 HTML support enabled.
>> 10-22 20:06:54 Self checking every 600 seconds.
>> 10-22 20:06:54 Listening daemon: PID: 4101
>> 10-22 20:06:54 MaxQueue set to: 100
>> 10-22 20:16:54 No stats for Database check - forcing reload
>> 10-22 20:16:54 Reading databases from /usr/share/clamav
>> 10-22 20:16:58 Database correctly reloaded (1316655 signatures)
>> 10-22 20:26:58 SelfCheck: Database status OK.
>> 10-22 20:36:58 SelfCheck: Database status OK.
>> 10-22 20:46:58 SelfCheck: Database status OK.
>> 10-22 20:56:58 SelfCheck: Database status OK.
>>
>>
>> thanks
>>
>>
>> 2012/10/22 Eric Shubert mailto:e...@shubes.net>
>> >>
>>
>>
>>
>>  On 10/22/2012 09:40 AM, Giuseppe Perna wrote:
>>
>>  Yes, mysql is started.
>>  I solved vpommail creating the

[qmailtoaster] Re: Error - no authentication database connection.Initial open.

2012-10-23 Thread Eric Shubert


You should have as the 2nd line in tcp.smtp:
:allow,BADMIMETYPE="",BADLOADERTYPE="M",CHKUSER_RCPTLIMIT="50",CHKUSER_WRONGRCPTLIMIT="10",QMAILQUEUE="/var/qmail/bin/simscan",NOP0FCHECK="1"

Change it, then run
# service qmail cdb

--
-Eric 'shubes'

On 10/23/2012 12:01 AM, Giuseppe Perna wrote:

Thanks eric for you replay,
this output:
cat /var/qmail/control/simcontrol
:clam=yes,spam=yes,spam_hits=12,attach=.mp3:.src:.bat:.pif

cat /etc/tcprules.d/tcp.smtp
127.:allow,RELAYCLIENT="",DKSIGN="/var/qmail/control/domainkeys/%/private"
:allow,BADMIMETYPE="",BADLOADERTYPE="M",CHKUSER_RCPTLIMIT="50",CHKUSER_WRONGRCPTLIMIT="10",DKSIGN="/var
   /qmail/control/domainkeys/%/private"


i have test the configuration but not fuction.
thanks

i have run /etc/init.d/qmail cdb
2012/10/22 Eric Shubert mailto:e...@shubes.net>>

Looks as though clamd's running ok. Next thing to check would be
simscan.

Let's have a look at:
# cat /var/qmail/control/simcontrol
# cat /etc/tcprules.d/tcp.smtp

Have you run "service qmail cdb" recently?
This needs to be run whenever the above 2 (and a few others) are
changed.

--
-Eric 'shubes'


On 10/22/2012 12:09 PM, Giuseppe Perna wrote:

thanks for your replay.
i have upgrade the server with qtp-newmodel.
i read this :
# qmlog -t 50 clamd
10-22 19:19:26 MaxQueue set to: 100
10-22 19:29:26 No stats for Database check - forcing reload
10-22 19:29:26 Reading databases from /usr/share/clamav
10-22 19:29:30 Database correctly reloaded (1316654 signatures)
10-22 19:34:32 Waiting for all threads to finish
10-22 19:34:59 Limits: Global size limit set to 104857600 bytes.
10-22 19:34:59 Limits: File size limit set to 26214400 bytes.
10-22 19:34:59 Limits: Recursion level limit set to 16.
10-22 19:34:59 Limits: Files limit set to 1.
10-22 19:34:59 Limits: Core-dump limit is 0.
10-22 19:34:59 Archive support enabled.
10-22 19:34:59 Algorithmic detection enabled.
10-22 19:34:59 Portable Executable support enabled.
10-22 19:34:59 ELF support enabled.
10-22 19:34:59 Mail files support enabled.
10-22 19:34:59 OLE2 support enabled.
10-22 19:34:59 PDF support enabled.
10-22 19:34:59 HTML support enabled.
10-22 19:34:59 Self checking every 600 seconds.
10-22 19:34:59 Listening daemon: PID: 19817
10-22 19:34:59 MaxQueue set to: 100
10-22 19:44:59 No stats for Database check - forcing reload
10-22 19:44:59 Reading databases from /usr/share/clamav
10-22 19:45:03 Database correctly reloaded (1316655 signatures)
10-22 19:55:03 SelfCheck: Database status OK.
10-22 20:05:03 SelfCheck: Database status OK.
10-22 20:05:34 Waiting for all threads to finish
10-22 20:06:54 Limits: Global size limit set to 104857600 bytes.
10-22 20:06:54 Limits: File size limit set to 26214400 bytes.
10-22 20:06:54 Limits: Recursion level limit set to 16.
10-22 20:06:54 Limits: Files limit set to 1.
10-22 20:06:54 Limits: Core-dump limit is 0.
10-22 20:06:54 Archive support enabled.
10-22 20:06:54 Algorithmic detection enabled.
10-22 20:06:54 Portable Executable support enabled.
10-22 20:06:54 ELF support enabled.
10-22 20:06:54 Mail files support enabled.
10-22 20:06:54 OLE2 support enabled.
10-22 20:06:54 PDF support enabled.
10-22 20:06:54 HTML support enabled.
10-22 20:06:54 Self checking every 600 seconds.
10-22 20:06:54 Listening daemon: PID: 4101
10-22 20:06:54 MaxQueue set to: 100
10-22 20:16:54 No stats for Database check - forcing reload
10-22 20:16:54 Reading databases from /usr/share/clamav
10-22 20:16:58 Database correctly reloaded (1316655 signatures)
10-22 20:26:58 SelfCheck: Database status OK.
10-22 20:36:58 SelfCheck: Database status OK.
10-22 20:46:58 SelfCheck: Database status OK.
10-22 20:56:58 SelfCheck: Database status OK.


thanks


2012/10/22 Eric Shubert mailto:e...@shubes.net>
>>


 On 10/22/2012 09:40 AM, Giuseppe Perna wrote:

 Yes, mysql is started.
 I solved vpommail creating the database and the user
vpopmail.
 I then edited the file vpopmail.mysql.

 clamad that is now not working.
 I tried to send and receive email with virus test eicar
but does not
 block anything.


 What does your clamd log show?
 # qmlog -t 50 clamd



 but this sceript QTP-newmodel work?


 The qtp-newmodel script is historically quite reliable. There's
 always a possibility of a situation though tha

Re: [qmailtoaster] Re: Error - no authentication database connection.Initial open.

2012-10-23 Thread Giuseppe Perna

Thanks eric for you replay,
this output:
cat /var/qmail/control/simcontrol
:clam=yes,spam=yes,spam_hits=12,attach=.mp3:.src:.bat:.pif

cat /etc/tcprules.d/tcp.smtp
127.:allow,RELAYCLIENT="",DKSIGN="/var/qmail/control/domainkeys/%/private"
:allow,BADMIMETYPE="",BADLOADERTYPE="M",CHKUSER_RCPTLIMIT="50",CHKUSER_WRONGRCPTLIMIT="10",DKSIGN="/var
  /qmail/control/domainkeys/%/private"


i have test the configuration but not fuction.
thanks

i have run /etc/init.d/qmail cdb
2012/10/22 Eric Shubert 

> Looks as though clamd's running ok. Next thing to check would be simscan.
>
> Let's have a look at:
> # cat /var/qmail/control/simcontrol
> # cat /etc/tcprules.d/tcp.smtp
>
> Have you run "service qmail cdb" recently?
> This needs to be run whenever the above 2 (and a few others) are changed.
>
> --
> -Eric 'shubes'
>
>
> On 10/22/2012 12:09 PM, Giuseppe Perna wrote:
>
>> thanks for your replay.
>> i have upgrade the server with qtp-newmodel.
>> i read this :
>> # qmlog -t 50 clamd
>> 10-22 19:19:26 MaxQueue set to: 100
>> 10-22 19:29:26 No stats for Database check - forcing reload
>> 10-22 19:29:26 Reading databases from /usr/share/clamav
>> 10-22 19:29:30 Database correctly reloaded (1316654 signatures)
>> 10-22 19:34:32 Waiting for all threads to finish
>> 10-22 19:34:59 Limits: Global size limit set to 104857600 bytes.
>> 10-22 19:34:59 Limits: File size limit set to 26214400 bytes.
>> 10-22 19:34:59 Limits: Recursion level limit set to 16.
>> 10-22 19:34:59 Limits: Files limit set to 1.
>> 10-22 19:34:59 Limits: Core-dump limit is 0.
>> 10-22 19:34:59 Archive support enabled.
>> 10-22 19:34:59 Algorithmic detection enabled.
>> 10-22 19:34:59 Portable Executable support enabled.
>> 10-22 19:34:59 ELF support enabled.
>> 10-22 19:34:59 Mail files support enabled.
>> 10-22 19:34:59 OLE2 support enabled.
>> 10-22 19:34:59 PDF support enabled.
>> 10-22 19:34:59 HTML support enabled.
>> 10-22 19:34:59 Self checking every 600 seconds.
>> 10-22 19:34:59 Listening daemon: PID: 19817
>> 10-22 19:34:59 MaxQueue set to: 100
>> 10-22 19:44:59 No stats for Database check - forcing reload
>> 10-22 19:44:59 Reading databases from /usr/share/clamav
>> 10-22 19:45:03 Database correctly reloaded (1316655 signatures)
>> 10-22 19:55:03 SelfCheck: Database status OK.
>> 10-22 20:05:03 SelfCheck: Database status OK.
>> 10-22 20:05:34 Waiting for all threads to finish
>> 10-22 20:06:54 Limits: Global size limit set to 104857600 bytes.
>> 10-22 20:06:54 Limits: File size limit set to 26214400 bytes.
>> 10-22 20:06:54 Limits: Recursion level limit set to 16.
>> 10-22 20:06:54 Limits: Files limit set to 1.
>> 10-22 20:06:54 Limits: Core-dump limit is 0.
>> 10-22 20:06:54 Archive support enabled.
>> 10-22 20:06:54 Algorithmic detection enabled.
>> 10-22 20:06:54 Portable Executable support enabled.
>> 10-22 20:06:54 ELF support enabled.
>> 10-22 20:06:54 Mail files support enabled.
>> 10-22 20:06:54 OLE2 support enabled.
>> 10-22 20:06:54 PDF support enabled.
>> 10-22 20:06:54 HTML support enabled.
>> 10-22 20:06:54 Self checking every 600 seconds.
>> 10-22 20:06:54 Listening daemon: PID: 4101
>> 10-22 20:06:54 MaxQueue set to: 100
>> 10-22 20:16:54 No stats for Database check - forcing reload
>> 10-22 20:16:54 Reading databases from /usr/share/clamav
>> 10-22 20:16:58 Database correctly reloaded (1316655 signatures)
>> 10-22 20:26:58 SelfCheck: Database status OK.
>> 10-22 20:36:58 SelfCheck: Database status OK.
>> 10-22 20:46:58 SelfCheck: Database status OK.
>> 10-22 20:56:58 SelfCheck: Database status OK.
>>
>>
>> thanks
>>
>>
>> 2012/10/22 Eric Shubert mailto:e...@shubes.net>>
>>
>>
>> On 10/22/2012 09:40 AM, Giuseppe Perna wrote:
>>
>> Yes, mysql is started.
>> I solved vpommail creating the database and the user vpopmail.
>> I then edited the file vpopmail.mysql.
>>
>> clamad that is now not working.
>> I tried to send and receive email with virus test eicar but does
>> not
>> block anything.
>>
>>
>> What does your clamd log show?
>> # qmlog -t 50 clamd
>>
>>
>>
>> but this sceript QTP-newmodel work?
>>
>>
>> The qtp-newmodel script is historically quite reliable. There's
>> always a possibility of a situation though that could reveal a
>> problem. There's a lot of code involved with that (>3000 lines if my
>> memory serves).
>>
>>
>> thanks
>>
>>
>>
>> --
>> -Eric 'shubes'
>>
>>
>> --**__**
>> --__-
>> To unsubscribe, e-mail:
>> qmailtoaster-list-unsubscribe@**__qmailtoaster.com
>> 
>> > >
>> For additional commands, e-mail:
>> qmailtoaster-list-help@__qmail**toaster.com 
>> 
>> > >
>>
>>
>>
>>
>> --
>>
>>
>>
>
>
> --**--**-
> To u

[qmailtoaster] Re: Error - no authentication database connection.Initial open.

2012-10-22 Thread Eric Shubert


Looks as though clamd's running ok. Next thing to check would be simscan.

Let's have a look at:
# cat /var/qmail/control/simcontrol
# cat /etc/tcprules.d/tcp.smtp

Have you run "service qmail cdb" recently?
This needs to be run whenever the above 2 (and a few others) are changed.

--
-Eric 'shubes'

On 10/22/2012 12:09 PM, Giuseppe Perna wrote:

thanks for your replay.
i have upgrade the server with qtp-newmodel.
i read this :
# qmlog -t 50 clamd
10-22 19:19:26 MaxQueue set to: 100
10-22 19:29:26 No stats for Database check - forcing reload
10-22 19:29:26 Reading databases from /usr/share/clamav
10-22 19:29:30 Database correctly reloaded (1316654 signatures)
10-22 19:34:32 Waiting for all threads to finish
10-22 19:34:59 Limits: Global size limit set to 104857600 bytes.
10-22 19:34:59 Limits: File size limit set to 26214400 bytes.
10-22 19:34:59 Limits: Recursion level limit set to 16.
10-22 19:34:59 Limits: Files limit set to 1.
10-22 19:34:59 Limits: Core-dump limit is 0.
10-22 19:34:59 Archive support enabled.
10-22 19:34:59 Algorithmic detection enabled.
10-22 19:34:59 Portable Executable support enabled.
10-22 19:34:59 ELF support enabled.
10-22 19:34:59 Mail files support enabled.
10-22 19:34:59 OLE2 support enabled.
10-22 19:34:59 PDF support enabled.
10-22 19:34:59 HTML support enabled.
10-22 19:34:59 Self checking every 600 seconds.
10-22 19:34:59 Listening daemon: PID: 19817
10-22 19:34:59 MaxQueue set to: 100
10-22 19:44:59 No stats for Database check - forcing reload
10-22 19:44:59 Reading databases from /usr/share/clamav
10-22 19:45:03 Database correctly reloaded (1316655 signatures)
10-22 19:55:03 SelfCheck: Database status OK.
10-22 20:05:03 SelfCheck: Database status OK.
10-22 20:05:34 Waiting for all threads to finish
10-22 20:06:54 Limits: Global size limit set to 104857600 bytes.
10-22 20:06:54 Limits: File size limit set to 26214400 bytes.
10-22 20:06:54 Limits: Recursion level limit set to 16.
10-22 20:06:54 Limits: Files limit set to 1.
10-22 20:06:54 Limits: Core-dump limit is 0.
10-22 20:06:54 Archive support enabled.
10-22 20:06:54 Algorithmic detection enabled.
10-22 20:06:54 Portable Executable support enabled.
10-22 20:06:54 ELF support enabled.
10-22 20:06:54 Mail files support enabled.
10-22 20:06:54 OLE2 support enabled.
10-22 20:06:54 PDF support enabled.
10-22 20:06:54 HTML support enabled.
10-22 20:06:54 Self checking every 600 seconds.
10-22 20:06:54 Listening daemon: PID: 4101
10-22 20:06:54 MaxQueue set to: 100
10-22 20:16:54 No stats for Database check - forcing reload
10-22 20:16:54 Reading databases from /usr/share/clamav
10-22 20:16:58 Database correctly reloaded (1316655 signatures)
10-22 20:26:58 SelfCheck: Database status OK.
10-22 20:36:58 SelfCheck: Database status OK.
10-22 20:46:58 SelfCheck: Database status OK.
10-22 20:56:58 SelfCheck: Database status OK.


thanks


2012/10/22 Eric Shubert mailto:e...@shubes.net>>

On 10/22/2012 09:40 AM, Giuseppe Perna wrote:

Yes, mysql is started.
I solved vpommail creating the database and the user vpopmail.
I then edited the file vpopmail.mysql.

clamad that is now not working.
I tried to send and receive email with virus test eicar but does not
block anything.


What does your clamd log show?
# qmlog -t 50 clamd



but this sceript QTP-newmodel work?


The qtp-newmodel script is historically quite reliable. There's
always a possibility of a situation though that could reveal a
problem. There's a lot of code involved with that (>3000 lines if my
memory serves).


thanks



--
-Eric 'shubes'


--__--__-
To unsubscribe, e-mail:
qmailtoaster-list-unsubscribe@__qmailtoaster.com

For additional commands, e-mail:
qmailtoaster-list-help@__qmailtoaster.com





--






-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Re: Error - no authentication database connection.Initial open.

2012-10-22 Thread Giuseppe Perna

thanks for your replay.
i have upgrade the server with qtp-newmodel.
i read this :
# qmlog -t 50 clamd
10-22 19:19:26 MaxQueue set to: 100
10-22 19:29:26 No stats for Database check - forcing reload
10-22 19:29:26 Reading databases from /usr/share/clamav
10-22 19:29:30 Database correctly reloaded (1316654 signatures)
10-22 19:34:32 Waiting for all threads to finish
10-22 19:34:59 Limits: Global size limit set to 104857600 bytes.
10-22 19:34:59 Limits: File size limit set to 26214400 bytes.
10-22 19:34:59 Limits: Recursion level limit set to 16.
10-22 19:34:59 Limits: Files limit set to 1.
10-22 19:34:59 Limits: Core-dump limit is 0.
10-22 19:34:59 Archive support enabled.
10-22 19:34:59 Algorithmic detection enabled.
10-22 19:34:59 Portable Executable support enabled.
10-22 19:34:59 ELF support enabled.
10-22 19:34:59 Mail files support enabled.
10-22 19:34:59 OLE2 support enabled.
10-22 19:34:59 PDF support enabled.
10-22 19:34:59 HTML support enabled.
10-22 19:34:59 Self checking every 600 seconds.
10-22 19:34:59 Listening daemon: PID: 19817
10-22 19:34:59 MaxQueue set to: 100
10-22 19:44:59 No stats for Database check - forcing reload
10-22 19:44:59 Reading databases from /usr/share/clamav
10-22 19:45:03 Database correctly reloaded (1316655 signatures)
10-22 19:55:03 SelfCheck: Database status OK.
10-22 20:05:03 SelfCheck: Database status OK.
10-22 20:05:34 Waiting for all threads to finish
10-22 20:06:54 Limits: Global size limit set to 104857600 bytes.
10-22 20:06:54 Limits: File size limit set to 26214400 bytes.
10-22 20:06:54 Limits: Recursion level limit set to 16.
10-22 20:06:54 Limits: Files limit set to 1.
10-22 20:06:54 Limits: Core-dump limit is 0.
10-22 20:06:54 Archive support enabled.
10-22 20:06:54 Algorithmic detection enabled.
10-22 20:06:54 Portable Executable support enabled.
10-22 20:06:54 ELF support enabled.
10-22 20:06:54 Mail files support enabled.
10-22 20:06:54 OLE2 support enabled.
10-22 20:06:54 PDF support enabled.
10-22 20:06:54 HTML support enabled.
10-22 20:06:54 Self checking every 600 seconds.
10-22 20:06:54 Listening daemon: PID: 4101
10-22 20:06:54 MaxQueue set to: 100
10-22 20:16:54 No stats for Database check - forcing reload
10-22 20:16:54 Reading databases from /usr/share/clamav
10-22 20:16:58 Database correctly reloaded (1316655 signatures)
10-22 20:26:58 SelfCheck: Database status OK.
10-22 20:36:58 SelfCheck: Database status OK.
10-22 20:46:58 SelfCheck: Database status OK.
10-22 20:56:58 SelfCheck: Database status OK.


thanks


2012/10/22 Eric Shubert 

> On 10/22/2012 09:40 AM, Giuseppe Perna wrote:
>
>> Yes, mysql is started.
>> I solved vpommail creating the database and the user vpopmail.
>> I then edited the file vpopmail.mysql.
>>
>> clamad that is now not working.
>> I tried to send and receive email with virus test eicar but does not
>> block anything.
>>
>
> What does your clamd log show?
> # qmlog -t 50 clamd
>
>
>
>> but this sceript QTP-newmodel work?
>>
>
> The qtp-newmodel script is historically quite reliable. There's always a
> possibility of a situation though that could reveal a problem. There's a
> lot of code involved with that (>3000 lines if my memory serves).
>
>
>> thanks
>>
>
>
> --
> -Eric 'shubes'
>
>
> --**--**-
> To unsubscribe, e-mail: 
> qmailtoaster-list-unsubscribe@**qmailtoaster.com
> For additional commands, e-mail: 
> qmailtoaster-list-help@**qmailtoaster.com
>
>


--

[qmailtoaster] Re: Error - no authentication database connection.Initial open.

2012-10-22 Thread Eric Shubert


On 10/22/2012 09:40 AM, Giuseppe Perna wrote:

Yes, mysql is started.
I solved vpommail creating the database and the user vpopmail.
I then edited the file vpopmail.mysql.

clamad that is now not working.
I tried to send and receive email with virus test eicar but does not
block anything.


What does your clamd log show?
# qmlog -t 50 clamd



but this sceript QTP-newmodel work?


The qtp-newmodel script is historically quite reliable. There's always a 
possibility of a situation though that could reveal a problem. There's a 
lot of code involved with that (>3000 lines if my memory serves).




thanks



--
-Eric 'shubes'


-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Re: Error - no authentication database connection.Initial open.

2012-10-22 Thread Giuseppe Perna

Yes, mysql is started.
I solved vpommail creating the database and the user vpopmail.
I then edited the file vpopmail.mysql.

clamad that is now not working.
I tried to send and receive email with virus test eicar but does not block
anything.

but this sceript QTP-newmodel work?

thanks


2012/10/22 Eric Shubert 

> On 10/21/2012 04:33 AM, Giuseppe Perna wrote:
>
>> hello,
>> I installed qmailtoaster with QTP-newmodel, but when I try to add a new
>> domain I get this error:
>> Error - no authentication database connection.Initial open.
>> I verified that the databases in mysql are:
>> information_schema
>> mysql
>> test
>>
>> there 'the databases vpopmail
>>
>> what should I do?
>>
>> thanks
>>
>> --
>>
>
> I presume you have all of the latest packages installed, and are using
> vqadmin to create the domain.
>
> Is msqld running?:
> # service mysqld status
>
> Does the /home/vpopmail/bin/vadddomain command give you the same result?
>
>
> --
> -Eric 'shubes'
>
> --**--**-
> To unsubscribe, e-mail: 
> qmailtoaster-list-unsubscribe@**qmailtoaster.com
> For additional commands, e-mail: 
> qmailtoaster-list-help@**qmailtoaster.com
>
>


--

[qmailtoaster] Re: Error - no authentication database connection.Initial open.

2012-10-21 Thread Eric Shubert


On 10/21/2012 04:33 AM, Giuseppe Perna wrote:

hello,
I installed qmailtoaster with QTP-newmodel, but when I try to add a new
domain I get this error:
Error - no authentication database connection.Initial open.
I verified that the databases in mysql are:
information_schema
mysql
test

there 'the databases vpopmail

what should I do?

thanks

--


I presume you have all of the latest packages installed, and are using 
vqadmin to create the domain.


Is msqld running?:
# service mysqld status

Does the /home/vpopmail/bin/vadddomain command give you the same result?


--
-Eric 'shubes'

-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: Error in IMAP

2012-09-06 Thread Eric Shubert


On 09/05/2012 05:46 AM, qmail wrote:

Hi,

We are using qmail toaster,

OS - CentOS5

Currently we are facing one issue in toaster, We use courier-imap for
the mails.

Problem is courier-imap links are breaking when connection reach maximum
size, This results on MSoutlook and went to offline mode frequently.

Please check the attachment of the problem.

Regards,

Ravi



You should install dovecot in place of courier-imap. The wiki has 
directions for doing so. Dovecot will be the stock imap software in QMT 
in the future.


--
-Eric 'shubes'




-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: Error while receiving mail

2012-07-27 Thread Eric Shubert


I don't think it's chkuser, as I see this in my log:
07-26 15:39:49 spamdyke[30727]: ALLOWED from: 
bounce-use=m=6670789299=echo7=d3b62e84d9c59197a58d42b0badc7...@returnpath.bluehornet.com 



QMT is accepting the message ok. It's the Exchange server that's 
complaining about what QMT is sending it.


Need to find out what's causing Exchange to throw the 5.5.4 error. Is 
there some way to log/trace this on the Exchange end? If not, perhaps 
recordio can be hooked up on the send side of QMT. I've only used 
recordio on the receiving side of QMT, so I'm not sure if that's 
possible. You might try whatever sniffing tool you can use to see where 
in the session Exchange is choking.


Is there anything out of the ordinary about the message? Can the sender 
send a simple message with a little text?


--
-Eric 'shubes'

On 07/27/2012 06:43 AM, Dan McAllister wrote:

Amit,

I suspect chkuser is choking on the presence of the = characters in the
mail address...

Dan

On 7/27/2012 3:23 AM, Amit wrote:


Hi,

I’m using QMT to scan and forward mail to internal Exchange server at
1 of my client location. Everything is working fine, but yesterday my
client complaint that he is not receiving mail from 1 of the sender
and sender is getting bounce message. Below is the bounce message:

Connected to 192.168.1.6 but sender was rejected.

Remote host said: 501 5.5.4 Invalid arguments

--- Below this line is a copy of the message.

Return-Path: mailto:prvs=477efc563=rounak.ambe...@ap.cushwake.com>>

Here, 192.168.1.6 is my exchange server IP. When I remove QMT, then I
receive the email. Do I follow same process which we do for blackberry
characters.

*Regards,*

**


*Amit*|  Mobile : +91 - 866101

http://iknowledgefactory.com/ikf_email/ikf_logo.jpg 



http://iknowledgefactory.com/ikf_email/line_1.jpg





*I Knowledge Factory Pvt. Ltd.*
Manohar, Plot No. 2, S.No : 47/1B- 1/2,
3rd Floor, Taware Colony, Near Muktangan School, Aranyeshwar Road.
Pune - 411009
Tel : +91-20-2422-786-1 / 2 / 3 / 4 Extn - 204

http://iknowledgefactory.com/ikf_email/facebook.jpg




http://iknowledgefactory.com/ikf_email/linkedin.jpg





--

IT4SOHO, LLC
PO Box 507
St. Petersburg, FL 33731-0507

CALL TOLL FREE:
   877-IT4SOHO

We have support plans for QMail!







-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: error in installation qmail-toaster on Centos6

2012-07-18 Thread Eric Shubert


On 07/18/2012 11:42 AM, Am Am wrote:

Hi,

error: Failed build dependencies:
 vpopmail-toaster >= 5.4.17 is needed by
qmail-toaster-1.03-1.3.22.i686
1:qmail-toaster  warning: user shubes does not exist - using
root

+

error: File not found by glob: /usr/src/redhat/RPMS/i686/qmail-pop3d*.rpm

also Qmail-newmodel is not supported.


CentOS6 is not officially supported yet. If you need to install on COS6, 
see the list archives for what you need to do to accomplish this.


--
-Eric 'shubes'




-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Re: Error SMTP

2011-03-22 Thread Kévin Chollet


It does not seem to work.

Here is the result of qtp-whatami :

qtp-whatami v0.3.7 mar mar 22 09:29:34 CET 2011
DISTRO=CentOS
OSVER=5.5
QTARCH=x86_64
QTKERN=2.6.18-194.32.1.el5
BUILD_DIST=cnt5064
BUILD_DIR=/usr/src/redhat
This machine's OS is supported and has been tested



and of rpm -qa | grep toaster | sort

autorespond-toaster-2.0.4-1.3.6
clamav-toaster-0.97.0-1.3.41
control-panel-toaster-0.5-1.3.7
courier-authlib-toaster-0.59.2-1.3.10
courier-imap-toaster-4.1.2-1.3.10
daemontools-toaster-0.76-1.3.6
ezmlm-cgi-toaster-0.53.324-1.3.6
ezmlm-toaster-0.53.324-1.3.6
isoqlog-toaster-2.1-1.3.7
libdomainkeys-toaster-0.68-1.3.6
libsrs2-toaster-1.0.18-1.3.6
maildrop-toaster-2.0.3-1.3.8
maildrop-toaster-devel-2.0.3-1.3.8
qmailadmin-toaster-1.2.15-1.3.9
qmailmrtg-toaster-4.2-1.3.6
qmail-pop3d-toaster-1.03-1.3.20
qmail-toaster-1.03-1.3.20
qmailtoaster-plus-0.3.2-1.4.16
qmailtoaster-plus.repo-0.2-2
ripmime-toaster-1.4.0.6-1.3.6
send-emails-toaster-0.5-1.3.7
simscan-toaster-1.4.0-1.3.8
spamassassin-toaster-3.2.5-1.3.17
squirrelmail-toaster-1.4.20-1.3.17
ucspi-tcp-toaster-0.88-1.3.9
vpopmail-toaster-5.4.17-1.3.7
vqadmin-toaster-2.3.4-1.3.6

Thank you

On Sat, 12 Mar 2011 10:32:13 -0700, Eric Shubert wrote:

There could be a problem with your queues. Try running:

Be sure you have the latest qmailtoaster-plus package installed 
first:

# yum update qmailtoaster-plus.repo
# yum update qmailtoaster-plus

Then run the queue repair tool:
# service qmail stop
# queue_repair.py -r
# service qmail start

That might cure it. Might not too, but it won't hurt.

If that doesn't fix things, please post results of:
# qtp-whatami
# rpm -qa | grep toaster | sort

--
-Eric 'shubes'

On 03/12/2011 09:52 AM, Administration GruyereHeberge wrote:

Hello,

Sometimes, when I try to send an email via FTP, the server sends me 
the

following error:
mail server temporarily rejected message

and the problem is solved by restarting qmail-toaster (qmailctl stop 
;

qmailctl start;)

Here is my /var/log/qmail/submission/current :

@40004d7b581800420464 tcpserver: status: 0/100
@40004d7b594538a9265c tcpserver: status: 1/100
@40004d7b594538a92a44 tcpserver: pid 14333 from ###
@40004d7b594538a92e2c tcpserver: ok 14333 ###.ch:###:587 
:###::52902

@40004d7b594618a1abf4 CHKUSER accepted sender: from
<###@:###@:> remote  : sender
accepted
@40004d7b594618e27db4 CHKUSER accepted rcpt: from
<###@:###@:> remote  rcpt <###@> 
:

found existing recipient
@40004d7b594618e28584 policy_check: local ###@ -> local 
###@

(AUTHENTICATED SENDER)
@40004d7b594618e2896c policy_check: policy allows transmission
@40004d7b594619174d3c qmail-smtpd: qq soft reject (mail server
temporarily rejected message (#4.3.0)): MAILFROM:<###@> 
RCPTTO:###@

@40004d7b59471292630c tcpserver: status: 2/100


Sorry for my English and thank you for help.

kevin


-





-
Qmailtoaster is sponsored by Vickers Consulting Group
(www.vickersconsulting.com)
   Vickers Consulting Group offers Qmailtoaster support and 
installations.
 If you need professional help with your setup, contact them 
today!


-
Please visit qmailtoaster.com for the latest news, updates, and 
packages.

 To unsubscribe, e-mail:
qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: 
qmailtoaster-list-h...@qmailtoaster.com




-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
   Vickers Consulting Group offers Qmailtoaster support and installations.
 If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.

 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com

For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Re: Error updating with qmailadmin-toaster-1.2.15-1.3.9.src.rpm

2011-03-18 Thread Jake Vickers


On 03/18/2011 10:50 AM, Eric Shubert wrote:
Yes, it appears to be a bad download. You'll need to remove the bad 
one manually from the /usr/src/qtp-upgrade/SRPMS/ directory, then 
rerun qtp-newmodel.


Jake, if you make md5 (or sha or whatever) files available for the 
packages, I'll modify qtp-newmodel to check them and re-download when 
this problem occurs.




I'll take a look at this - I'll need to modify some of the other 
download scripts as well. Lots of things to consider - if MD5 fails, 
how does the client get the package? (probably fail back to my 
monolithic server since this will be easier than trying to flush the DNS 
cache).
Take this over to the devel list, please, and we'll start a conversation 
there and maybe get some other talent to modify some of the existing 
scripts as well.

Thanks.

-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
   Vickers Consulting Group offers Qmailtoaster support and installations.
 If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.

 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com

For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: Error updating with qmailadmin-toaster-1.2.15-1.3.9.src.rpm

2011-03-18 Thread Eric Shubert

Yes, it appears to be a bad download. You'll need to remove the bad one 
manually from the /usr/src/qtp-upgrade/SRPMS/ directory, then rerun 
qtp-newmodel.


Jake, if you make md5 (or sha or whatever) files available for the 
packages, I'll modify qtp-newmodel to check them and re-download when 
this problem occurs.


--
-Eric 'shubes'

On 03/18/2011 07:06 AM, Maxwell Smart wrote:

Try again.   It may have been trying to use the mirror that's having a
connection problem.



On 03/18/2011 02:31 AM, Kjetil Paulsen wrote:

I'm getting

qtp-whatami v0.3.7 Fri Mar 18 10:10:38 CET 2011
DISTRO=CentOS
OSVER=5.5
QTARCH=i686
QTKERN=2.6.18-194.8.1.el5
BUILD_DIST=cnt50
BUILD_DIR=/usr/src/redhat
This machine's OS is supported and has been tested
qtp-config v0.3.2
QMT_WEB=http://www.qmailtoaster.com
QMT_DEV=http://www.qmailtoaster.org
SANDBOX=/mnt/qtp-sandbox
OVERLAY=/opt/qtp-overlay
UPGRADE_DIR=/usr/src/qtp-upgrade
RPMBUILD_OPTIONS=
backupdest=/backup/qmailbkup
useftp=n
ftpserver=ftp://
emailinfo=y
email=postmaster
removeprevious=n
mysql_user=vpopmail
ldap_user=
Building qmailadmin-toaster-1.2.15-1.3.9 ...
error:
/usr/src/qtp-upgrade/SRPMS/qmailadmin-toaster-1.2.15-1.3.9.src.rpm
cannot be installed
Installing
/usr/src/qtp-upgrade/SRPMS/qmailadmin-toaster-1.2.15-1.3.9.src.rpm


with no explanation on why this fails..

any ideas or tips on where to look?

/K







-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
   Vickers Consulting Group offers Qmailtoaster support and installations.
 If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.

 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com

For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: Error SMTP

2011-03-12 Thread Eric Shubert


There could be a problem with your queues. Try running:

Be sure you have the latest qmailtoaster-plus package installed first:
# yum update qmailtoaster-plus.repo
# yum update qmailtoaster-plus

Then run the queue repair tool:
# service qmail stop
# queue_repair.py -r
# service qmail start

That might cure it. Might not too, but it won't hurt.

If that doesn't fix things, please post results of:
# qtp-whatami
# rpm -qa | grep toaster | sort

--
-Eric 'shubes'

On 03/12/2011 09:52 AM, Administration GruyereHeberge wrote:

Hello,

Sometimes, when I try to send an email via FTP, the server sends me the
following error:
mail server temporarily rejected message

and the problem is solved by restarting qmail-toaster (qmailctl stop ;
qmailctl start;)

Here is my /var/log/qmail/submission/current :

@40004d7b581800420464 tcpserver: status: 0/100
@40004d7b594538a9265c tcpserver: status: 1/100
@40004d7b594538a92a44 tcpserver: pid 14333 from ###
@40004d7b594538a92e2c tcpserver: ok 14333 ###.ch:###:587 :###::52902
@40004d7b594618a1abf4 CHKUSER accepted sender: from
<###@:###@:> remote  : sender
accepted
@40004d7b594618e27db4 CHKUSER accepted rcpt: from
<###@:###@:> remote  rcpt <###@> :
found existing recipient
@40004d7b594618e28584 policy_check: local ###@ -> local ###@
(AUTHENTICATED SENDER)
@40004d7b594618e2896c policy_check: policy allows transmission
@40004d7b594619174d3c qmail-smtpd: qq soft reject (mail server
temporarily rejected message (#4.3.0)): MAILFROM:<###@> RCPTTO:###@
@40004d7b59471292630c tcpserver: status: 2/100


Sorry for my English and thank you for help.

kevin

-




-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
   Vickers Consulting Group offers Qmailtoaster support and installations.
 If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.

 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com

For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: Error while sending & receiving mail from blackberry

2011-02-24 Thread Eric Shubert

The latest (2.0.9) chkuser is not in the qmail-toaster package yet. I 
know Jake is working on it, but he's been very busy lately. If I had to 
guess, I'd say we might see it in the next month or so.


You're certainly welcome to give it a try. I expect that you might need 
to modify the patch file a little bit. Let us know on the devel list how 
you're doing, and if you need an assist.


--
-Eric 'shubes'

On 02/24/2011 04:44 AM, Amit wrote:

Dear All,

I know this has been discuss many a times earlier and disabling sender
chkusr in tcp.smtp but I’m still getting error while receiving mail from
blackberry. Error is mention below

5.1.0 - Unknown address error 571-'sorry, sender address has invalid
format (#5.7.1 - chkuser)'

After reading the below post

http://www.mail-archive.com/qmailtoaster-list@qmailtoaster.com/msg30107.html

I just want to know is this chkusr version is update in current QMT. If
no, I want to give it a try. Any help how can I do the same?

*Regards,*

**

*Amit Dalia**
**Head - Tech Support*| *Mobile:*+91 – 866101

Call : +91 – 020- 25466352, 53, 54

I Knowledge Factory Pvt Ltd,

14, Yashshree, Sunita Society, Opposite Karnataka High School,
Erandwane, Pune- 411004, Maharashtra, India

Join Us: cid:image001.png@01CBA820.E533FB00
 cid:image002.png@01CBA820.E533FB00
 cid:image003.png@01CBA820.E533FB00
 cid:image004.png@01CBA820.E533FB00

cid:image005.png@01CBA820.E533FB00 





-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
   Vickers Consulting Group offers Qmailtoaster support and installations.
 If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.

 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com

For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

RE: [qmailtoaster] Re: error

2010-09-24 Thread Noel Rivera (Border Less)

Thanks Eric
-Original Message-
From: Eric Shubert [mailto:e...@shubes.net] 
Sent: Thursday, September 23, 2010 8:36 PM
To: qmailtoaster-list@qmailtoaster.com
Subject: [qmailtoaster] Re: error

That's not anything critical. Just wait for the new QTP to come out (in 
a week or so), and then run the qtp-dependencies script. That'll fix it.
-- 
-Eric 'shubes'

Noel Rivera (Border Less) wrote:
> Eric I modify the spamd file and I have this error:
> 
> 09-23 18:10:17 [2947] info: spamd: server killed by SIGTERM, shutting down
> 09-23 18:10:21 [8620] error: Can't locate Crypt/OpenSSL/Bignum.pm in @INC 
> (@INC contains: /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi 
> /usr/lib/perl5/vendor_perl/5.8.8 
> /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi 
> /usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi 
> /usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi 
> /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi 
> /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7 
> /usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5 
> /usr/lib/perl5/site_perl 
> /usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi 
> /usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi 
> /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi 
> /usr/lib/perl5/vendor_perl/5.8.7 /usr/lib/perl5/vendor_perl/5.8.6 
> /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl 
> /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8) at 
> /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi/Crypt/OpenSSL/R
SA.pm line 17.
> 
> Saludos.
> 
> 
> Borderless Consulting Group SA de CV.
> Noel Alban Rivera Rivera
> Jefe de Redes y Telecomunicaciones
> Tel. (915) 633-61-04
> Nextel 62*142650*2
>  Por favor considera el medio ambiente antes de imprimir este e-mail.
> 
> --


-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
Vickers Consulting Group offers Qmailtoaster support and installations.
  If you need professional help with your setup, contact them today!
-
 Please visit qmailtoaster.com for the latest news, updates, and packages.
 
  To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com



-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
Vickers Consulting Group offers Qmailtoaster support and installations.
  If you need professional help with your setup, contact them today!
-
 Please visit qmailtoaster.com for the latest news, updates, and packages.

  To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: error

2010-09-23 Thread Eric Shubert

That's not anything critical. Just wait for the new QTP to come out (in 
a week or so), and then run the qtp-dependencies script. That'll fix it.

--
-Eric 'shubes'

Noel Rivera (Border Less) wrote:

Eric I modify the spamd file and I have this error:

09-23 18:10:17 [2947] info: spamd: server killed by SIGTERM, shutting down
09-23 18:10:21 [8620] error: Can't locate Crypt/OpenSSL/Bignum.pm in @INC (@INC 
contains: /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi 
/usr/lib/perl5/vendor_perl/5.8.8 
/usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi 
/usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi 
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi 
/usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi 
/usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7 
/usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5 
/usr/lib/perl5/site_perl 
/usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi 
/usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi 
/usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi 
/usr/lib/perl5/vendor_perl/5.8.7 /usr/lib/perl5/vendor_perl/5.8.6 
/usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl 
/usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8) at 
/usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi/Crypt/OpenSSL/R

SA.pm line 17.


Saludos.


Borderless Consulting Group SA de CV.
Noel Alban Rivera Rivera
Jefe de Redes y Telecomunicaciones
Tel. (915) 633-61-04
Nextel 62*142650*2
 Por favor considera el medio ambiente antes de imprimir este e-mail.

--



-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
   Vickers Consulting Group offers Qmailtoaster support and installations.
 If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.

 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com

For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

RE: [qmailtoaster] Re: error

2010-09-23 Thread Noel Rivera (Border Less)

Eric I modify the spamd file and I have this error:

09-23 18:10:17 [2947] info: spamd: server killed by SIGTERM, shutting down
09-23 18:10:21 [8620] error: Can't locate Crypt/OpenSSL/Bignum.pm in @INC (@INC 
contains: /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi 
/usr/lib/perl5/vendor_perl/5.8.8 
/usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi 
/usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi 
/usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi 
/usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi 
/usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7 
/usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5 
/usr/lib/perl5/site_perl 
/usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi 
/usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi 
/usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi 
/usr/lib/perl5/vendor_perl/5.8.7 /usr/lib/perl5/vendor_perl/5.8.6 
/usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl 
/usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8) at 
/usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi/Crypt/OpenSSL/RSA.pm 
line 17.

Saludos.

Borderless Consulting Group SA de CV.
Noel Alban Rivera Rivera
Jefe de Redes y Telecomunicaciones
Tel. (915) 633-61-04
Nextel 62*142650*2
 Por favor considera el medio ambiente antes de imprimir este e-mail.

--

CONFIDENTIALITY NOTICE: This e-mail message including attachments, if any, is 
intended only for the person or entity to which it is addressed and may contain 
confidential and /or privileged material. Any review, use, disclosure or 
distribution of such confidential information without the written authorization 
of Borderless Consulting Group is prohibited. If you are not the intended 
recipient, please contact the sender by reply e-mail and destroy all copies of 
the original message. By receiving this e-mail you acknowledge that any breach 
by you and/or your representatives of the above provisions may entitle 
Borderless Consulting Group to seek for damages.

AVISO DE CONFIDENCIALIDAD: Este correo electrónico, incluyendo en su caso, los 
archivos adjuntos al mismo, pueden contener información de carácter 
confidencial y/o privilegiada, y se envían a la atención única y exclusivamente 
de la persona y/o entidad a quien va dirigido. La copia, revisión, uso, 
revelación y/o distribución de dicha información confidencial sin la 
autorización por escrito de Borderless Consulting Group está prohibida. Si 
usted no es el destinatario a quien se dirige el presente correo, favor de 
contactar al remitente respondiendo al presente correo y eliminar el correo 
original incluyendo sus archivos, así como cualesquiera copia del mismo. 
Mediante la recepción del presente correo usted reconoce y acepta que en caso 
de incumplimiento de su parte y/o de sus representantes a los términos antes 
mencionados, Borderless Consulting Group tendrá derecho a los daños y 
perjuicios que esto le cause.

-Original Message-
From: Eric Shubert [mailto:e...@shubes.net] 
Sent: Tuesday, September 21, 2010 5:56 PM
To: qmailtoaster-list@qmailtoaster.com
Subject: [qmailtoaster] Re: error

Noel Rivera (Border Less) wrote:
> 
> Here is my spamdike.conf
> 
> dns-blacklist-entry=zen.spamhaus.org
> dns-blacklist-entry=bl.spamcop.net
> dns-blacklist-entry=b.barracudacentral.org
> graylist-dir=/var/spamdyke/graylist
> graylist-level=always
> graylist-max-secs=2678400
> graylist-min-secs=180
> greeting-delay-secs=5
> connection-timeout-secs=660
> idle-timeout-secs=660
> ip-blacklist-file=/etc/spamdyke/blacklist_ip
> ip-in-rdns-keyword-blacklist-file=/etc/spamdyke/blacklist_keywords
> ip-in-rdns-keyword-whitelist-file=/etc/spamdyke/whitelist_keywords
> ip-whitelist-file=/etc/spamdyke/whitelist_ip
> local-domains-file=/var/qmail/control/rcpthosts
> log-level=info
> log-target=stderr
> max-recipients=40
> #policy-url=http://my.policy.explanation.url/
> rdns-blacklist-file=/etc/spamdyke/blacklist_rdns
> rdns-whitelist-file=/etc/spamdyke/whitelist_rdns
> recipient-blacklist-file=/etc/spamdyke/blacklist_recipients
> recipient-whitelist-file=/etc/spamdyke/whitelist_recipients
> reject-empty-rdns=1
> reject-ip-in-cc-rdns=1
> reject-missing-sender-mx=1
> reject-unresolvable-rdns=1
> sender-blacklist-file=/etc/spamdyke/blacklist_senders
> sender-whitelist-file=/etc/spamdyke/whitelist_senders
> tls-certificate-file=/var/qmail/control/servercert.pem
> config-dir=/etc/spamdyke/config.d

This looks fine to me.
> 
> Let's look at max smtp sessions. When you're seeing the soft reject
> message(s), how many smtp sessions are active (status line)? Does it
> ever max out at 100? What's the hi

[qmailtoaster] Re: error

2010-09-22 Thread Eric Shubert


Pak Ogah wrote:

On 21-Sep-10 2:47, Noel Rivera (Border Less) wrote:


Hello List In a few days I have this error in my qmail server, any 
ideas to solve this problem?


 


Thanks for your help

 

 

@40004c97b94f1d8935ec qmail-smtpd: qq soft reject (mail server 
temporarily rejected message (#4.3.0)): MAILFROM:


 


fyi, from my experience qq soft reject error happen when
- disk full
- oncurrency limits hits, you can try raise
/var/qmail/control/concurrencyincoming
/var/qmail/control/concurrencyremote




Are you sure about that, Pak? Disk full I'll buy. I don't believe 
hitting a concurrency limit will result in a qq soft reject message in 
the smtp log though. The reason is because when the concurrencyincoming 
limit is reached, an smtp session is not started. The qq soft reject 
message is coming from qmail-smtpd, which means that the session has 
started, and the limit could not have been reached. I don't see any log 
message from tcpserver (who would be doing the rejections in a 
concurrency limitation situation) regarding rejections due to the limit 
being reached (and I just checked for this to be sure), only the status 
message where the two numbers (current/max) are equal. No indication of 
blocked/rejected messages. I believe that blockage happens at the tcp 
level, and is not logged anywhere.


I think that lowering (not raising) the concurrencyincoming value can 
help to curb qq soft limits, at least in cases where the system is 
overloaded. We haven't been able to make that determination yet though 
in Noel's case.


The bottom line here is that when the concurrency limit is hit, it 
simply results in delayed delivery, as the sending server will try again 
later. The same is true for the qq soft reject message. The mail will 
eventually be delivered.


For those of you who may not know, message error numbers beginning with 
the number 4 (#4.x.x) are soft rejects, and are retried later by the 
sending server. Error numbers beginning with 5 (#5.x.x) are hard 
rejects, and result in the message being bounced back to the sender.


--
-Eric 'shubes'


-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
   Vickers Consulting Group offers Qmailtoaster support and installations.
 If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.

 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com

For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: error

2010-09-21 Thread Eric Shubert


Noel Rivera (Border Less) wrote:


Here is my spamdike.conf

dns-blacklist-entry=zen.spamhaus.org
dns-blacklist-entry=bl.spamcop.net
dns-blacklist-entry=b.barracudacentral.org
graylist-dir=/var/spamdyke/graylist
graylist-level=always
graylist-max-secs=2678400
graylist-min-secs=180
greeting-delay-secs=5
connection-timeout-secs=660
idle-timeout-secs=660
ip-blacklist-file=/etc/spamdyke/blacklist_ip
ip-in-rdns-keyword-blacklist-file=/etc/spamdyke/blacklist_keywords
ip-in-rdns-keyword-whitelist-file=/etc/spamdyke/whitelist_keywords
ip-whitelist-file=/etc/spamdyke/whitelist_ip
local-domains-file=/var/qmail/control/rcpthosts
log-level=info
log-target=stderr
max-recipients=40
#policy-url=http://my.policy.explanation.url/
rdns-blacklist-file=/etc/spamdyke/blacklist_rdns
rdns-whitelist-file=/etc/spamdyke/whitelist_rdns
recipient-blacklist-file=/etc/spamdyke/blacklist_recipients
recipient-whitelist-file=/etc/spamdyke/whitelist_recipients
reject-empty-rdns=1
reject-ip-in-cc-rdns=1
reject-missing-sender-mx=1
reject-unresolvable-rdns=1
sender-blacklist-file=/etc/spamdyke/blacklist_senders
sender-whitelist-file=/etc/spamdyke/whitelist_senders
tls-certificate-file=/var/qmail/control/servercert.pem
config-dir=/etc/spamdyke/config.d


This looks fine to me.


Let's look at max smtp sessions. When you're seeing the soft reject
message(s), how many smtp sessions are active (status line)? Does it
ever max out at 100? What's the highest number you've seen? How many are
typically active on average?

In /var/qmail/control/concurrencyincoming I have this value “80”


I'd like to see the typical values you have in the status messages in 
your smtp file. These messages indicate your 80 value, but more 
importantly how many of the 80 are being used at any time. Does it ever 
reach the maximum? What value is average? Most importantly, what value 
does it ready when you get the rejection errors?


When the server is very busy, try this command:
# qmlog -nl -g status smtp | grep -v end | less
Scroll through the output, and you'll see the values change as smtp 
sessions start and end. What are the values at the end of the listing 
(shift-G)?


Also, I should have asked already, what are the load levels you're 
seeing on the host? (top or uptime will show you load) I'm assuming 
they're a bit greater than one. If they're less than one (0.something), 
then we could be on the wrong track here.


Be sure to look at these things when the server is typically busy.



You have plenty of ram, so increasing the number of spamd processes will
probably help. Try changing your /var/qmail/supervise/spamd/run file as
such:
#!/bin/sh
exec /usr/bin/spamd -x -u vpopmail -s stderr \
   --max-children=20 \
   --min-children=5 \
   2>&1
Then run 'qmail-spam restart' to restart the spamd daemons.

 


In this file only have this information

#!/bin/sh
exec /usr/bin/spamd -x -u vpopmail -s stderr 2>&1



That is the stock/default configuration. We want to bump up the 
max-children and min-children settings, to hopefully get rid of the 
warning messages you were seeing in your spamd log. Replace what you 
have (2 lines) with what I've posted (5 lines). Be sure there are no 
spaces after the \ characters. Then restart spamd (qmail-spam restart).


--
-Eric 'shubes'


-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
   Vickers Consulting Group offers Qmailtoaster support and installations.
 If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.

 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com

For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

RE: [qmailtoaster] Re: error

2010-09-21 Thread Noel Rivera (Border Less)

Hello Eric thanks for your help

The biggest thing you can do to reduce the load on a QMT host is to use 

spamdyke, but I see you've already installed that. Please post your 

spamdyke.conf file so we can have a look at it.

Here is my spamdike.conf

dns-blacklist-entry=zen.spamhaus.org

dns-blacklist-entry=bl.spamcop.net

dns-blacklist-entry=b.barracudacentral.org

graylist-dir=/var/spamdyke/graylist

graylist-level=always

graylist-max-secs=2678400

graylist-min-secs=180

greeting-delay-secs=5

connection-timeout-secs=660

idle-timeout-secs=660

ip-blacklist-file=/etc/spamdyke/blacklist_ip

ip-in-rdns-keyword-blacklist-file=/etc/spamdyke/blacklist_keywords

ip-in-rdns-keyword-whitelist-file=/etc/spamdyke/whitelist_keywords

ip-whitelist-file=/etc/spamdyke/whitelist_ip

local-domains-file=/var/qmail/control/rcpthosts

log-level=info

log-target=stderr

max-recipients=40

#policy-url=http://my.policy.explanation.url/

rdns-blacklist-file=/etc/spamdyke/blacklist_rdns

rdns-whitelist-file=/etc/spamdyke/whitelist_rdns

recipient-blacklist-file=/etc/spamdyke/blacklist_recipients

recipient-whitelist-file=/etc/spamdyke/whitelist_recipients

reject-empty-rdns=1

reject-ip-in-cc-rdns=1

reject-missing-sender-mx=1

reject-unresolvable-rdns=1

sender-blacklist-file=/etc/spamdyke/blacklist_senders

sender-whitelist-file=/etc/spamdyke/whitelist_senders

tls-certificate-file=/var/qmail/control/servercert.pem

config-dir=/etc/spamdyke/config.d

Also, if it's been a while since you installed spamdyke, you might want to
run 

qtp-install-spamdyke again to be sure you have the latest version, and 

that the qtp-prune-graylist script is being run.

This night I will be run this updates.

Let's look at max smtp sessions. When you're seeing the soft reject 

message(s), how many smtp sessions are active (status line)? Does it 

ever max out at 100? What's the highest number you've seen? How many are 

typically active on average?

In /var/qmail/control/concurrencyincoming I have this value "80" 

You have plenty of ram, so increasing the number of spamd processes will 

probably help. Try changing your /var/qmail/supervise/spamd/run file as 

such:

#!/bin/sh

exec /usr/bin/spamd -x -u vpopmail -s stderr \

   --max-children=20 \

   --min-children=5 \

   2>&1

Then run 'qmail-spam restart' to restart the spamd daemons.

In this file only have this information

#!/bin/sh

exec /usr/bin/spamd -x -u vpopmail -s stderr 2>&1

We'll see what that does to help, and go from there.

-Original Message-
From: Eric Shubert [mailto:e...@shubes.net] 
Sent: Tuesday, September 21, 2010 9:51 AM
To: qmailtoaster-list@qmailtoaster.com
Subject: [qmailtoaster] Re: error

Noel Rivera (Border Less) wrote:

> Hello List In a few days I have this error in my qmail server, any ideas 

> to solve this problem?

> 

> Thanks for your help

> 

> @40004c97b94f1d8935ec qmail-smtpd: qq soft reject (mail server 

> temporarily rejected message (#4.3.0)): MAILFROM:

Now that I understand a little about your situation, back to the 

original problem.

Going on the presumption that this is happening due to heavy/over loads, 

let's do a little tuning.

The biggest thing you can do to reduce the load on a QMT host is to use 

spamdyke, but I see you've already installed that. Please post your 

spamdyke.conf file so we can have a look at it. Also, if it's been a 

while since you installed spamdyke, you might want to run 

qtp-install-spamdyke again to be sure you have the latest version, and 

that the qtp-prune-graylist script is being run.

Let's look at max smtp sessions. When you're seeing the soft reject 

message(s), how many smtp sessions are active (status line)? Does it 

ever max out at 100? What's the highest number you've seen? How many are 

typically active on average?

You have plenty of ram, so increasing the number of spamd processes will 

probably help. Try changing your /var/qmail/supervise/spamd/run file as 

such:

#!/bin/sh

exec /usr/bin/spamd -x -u vpopmail -s stderr \

   --max-children=20 \

   --min-children=5 \

   2>&1

Then run 'qmail-spam restart' to restart the spamd daemons.

We'll see what that does to help, and go from there.

-- 

-Eric 'shubes'

-

Qmailtoaster is sponsored by Vickers Consulting Group
(www.vickersconsulting.com)

Vickers Consulting Group offers Qmailtoaster support and installations.

  If you need professional help with your setup, contact them today!

-

 Please visit qmailtoaster.com for the latest news, updates, and
packages.

  To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com

 For additional commands, e-mail:
qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: error

2010-09-21 Thread Eric Shubert


Noel Rivera (Border Less) wrote:
Hello List In a few days I have this error in my qmail server, any ideas 
to solve this problem?


Thanks for your help

@40004c97b94f1d8935ec qmail-smtpd: qq soft reject (mail server 
temporarily rejected message (#4.3.0)): MAILFROM:


Now that I understand a little about your situation, back to the 
original problem.


Going on the presumption that this is happening due to heavy/over loads, 
let's do a little tuning.


The biggest thing you can do to reduce the load on a QMT host is to use 
spamdyke, but I see you've already installed that. Please post your 
spamdyke.conf file so we can have a look at it. Also, if it's been a 
while since you installed spamdyke, you might want to run 
qtp-install-spamdyke again to be sure you have the latest version, and 
that the qtp-prune-graylist script is being run.


Let's look at max smtp sessions. When you're seeing the soft reject 
message(s), how many smtp sessions are active (status line)? Does it 
ever max out at 100? What's the highest number you've seen? How many are 
typically active on average?


You have plenty of ram, so increasing the number of spamd processes will 
probably help. Try changing your /var/qmail/supervise/spamd/run file as 
such:

#!/bin/sh
exec /usr/bin/spamd -x -u vpopmail -s stderr \
  --max-children=20 \
  --min-children=5 \
  2>&1
Then run 'qmail-spam restart' to restart the spamd daemons.

We'll see what that does to help, and go from there.
--
-Eric 'shubes'


-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
   Vickers Consulting Group offers Qmailtoaster support and installations.
 If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.

 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com

For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

RE: [qmailtoaster] Re: error

2010-09-21 Thread Noel Rivera (Border Less)

Thanks for your reply Eric here is mi info:

What are your hardware specs?

(CPU, RAM, HDD)

CPU

processor   : 0

vendor_id   : AuthenticAMD

cpu family  : 6

model   : 10

model name  : AMD Athlon(tm)

stepping: 0

cpu MHz : 1303.009

cache size  : 512 KB

fdiv_bug: no

hlt_bug : no

f00f_bug: no

coma_bug: no

fpu : yes

fpu_exception   : yes

cpuid level : 1

wp  : yes

flags   : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat 
pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow up nonstop_tsc ts

bogomips: 2606.01

RAM 

2 GB

HDD

150 GB

What is your host's distro/ver, and QMT versions?

(# qtp-whatami)

(# rpm -qa | grep toaster | sort)

qtp-whatami v0.3.5

DISTRO=CentOS

OSVER=5.3

QTARCH=i686

QTKERN=2.6.18-164.el5

BUILD_DIST=cnt50

BUILD_DIR=/usr/src/redhat

This machine's OS is supported and has been tested

autorespond-toaster-2.0.4-1.3.6

clamav-toaster-0.96.2-1.3.37

control-panel-toaster-0.5-1.3.7

courier-authlib-toaster-0.59.2-1.3.10

courier-imap-toaster-4.1.2-1.3.10

daemontools-toaster-0.76-1.3.6

ezmlm-cgi-toaster-0.53.324-1.3.6

ezmlm-toaster-0.53.324-1.3.6

isoqlog-toaster-2.1-1.3.7

libdomainkeys-toaster-0.68-1.3.6

libsrs2-toaster-1.0.18-1.3.6

maildrop-toaster-2.0.3-1.3.8

maildrop-toaster-devel-2.0.3-1.3.8

qmailadmin-toaster-1.2.12-1.3.8

qmailmrtg-toaster-4.2-1.3.6

qmail-pop3d-toaster-1.03-1.3.20

qmail-toaster-1.03-1.3.20

qmailtoaster-plus-0.3.1-1.4.14

qmailtoaster-plus.repo-0.2-2

ripmime-toaster-1.4.0.6-1.3.6

send-emails-toaster-0.5-1.3.7

simscan-toaster-1.4.0-1.3.8

spamassassin-toaster-3.2.5-1.3.17

squirrelmail-toaster-1.4.20-1.3.17

ucspi-tcp-toaster-0.88-1.3.9

vpopmail-toaster-5.4.17-1.3.7

vqadmin-toaster-2.3.4-1.3.6

Have you adjusted any of the stock QMT settings? If so, which ones?

In this question I don’t know I only have spamdyke and modify to receive and 
send with blackberry users

Saludos.

Borderless Consulting Group SA de CV.

Noel Alban Rivera Rivera

Jefe de Redes y Telecomunicaciones

Tel. (915) 633-61-04

Nextel 62*142650*2

 Por favor considera el medio ambiente antes de imprimir este e-mail.

--

CONFIDENTIALITY NOTICE: This e-mail message including attachments, if any, is 
intended only for the person or entity to which it is addressed and may contain 
confidential and /or privileged material. Any review, use, disclosure or 
distribution of such confidential information without the written authorization 
of Borderless Consulting Group is prohibited. If you are not the intended 
recipient, please contact the sender by reply e-mail and destroy all copies of 
the original message. By receiving this e-mail you acknowledge that any breach 
by you and/or your representatives of the above provisions may entitle 
Borderless Consulting Group to seek for damages.

AVISO DE CONFIDENCIALIDAD: Este correo electrónico, incluyendo en su caso, los 
archivos adjuntos al mismo, pueden contener información de carácter 
confidencial y/o privilegiada, y se envían a la atención única y exclusivamente 
de la persona y/o entidad a quien va dirigido. La copia, revisión, uso, 
revelación y/o distribución de dicha información confidencial sin la 
autorización por escrito de Borderless Consulting Group está prohibida. Si 
usted no es el destinatario a quien se dirige el presente correo, favor de 
contactar al remitente respondiendo al presente correo y eliminar el correo 
original incluyendo sus archivos, así como cualesquiera copia del mismo. 
Mediante la recepción del presente correo usted reconoce y acepta que en caso 
de incumplimiento de su parte y/o de sus representantes a los términos antes 
mencionados, Borderless Consulting Group tendrá derecho a los daños y 
perjuicios que esto le cause.

-Original Message-
From: Eric Shubert [mailto:e...@shubes.net] 
Sent: Tuesday, September 21, 2010 8:48 AM
To: qmailtoaster-list@qmailtoaster.com
Subject: [qmailtoaster] Re: error

Noel Rivera (Border Less) wrote:

> 

> The clamav log is clean I have this line in the spamd log

> 

> 09-20 12:38:49 [16035] info: prefork: server reached --max-children 

> setting, consider raising it

This is indicative of a server under heavy load, which could also cause 

the qq soft reject as a side effect.

What are your hardware specs?

(CPU, RAM, HDD)

What is your host's distro/ver, and QMT versions?

(# qtp-whatami)

(# rpm -qa | grep toaster | sort)

Have you adjusted any of the stock QMT settings? If so, which ones?

-- 

-Eric 'shubes'

-

Qmailtoaster

[qmailtoaster] Re: error

2010-09-21 Thread Eric Shubert


Noel Rivera (Border Less) wrote:


The clamav log is clean I have this line in the spamd log

09-20 12:38:49 [16035] info: prefork: server reached --max-children 
setting, consider raising it


This is indicative of a server under heavy load, which could also cause 
the qq soft reject as a side effect.


What are your hardware specs?
(CPU, RAM, HDD)

What is your host's distro/ver, and QMT versions?
(# qtp-whatami)
(# rpm -qa | grep toaster | sort)

Have you adjusted any of the stock QMT settings? If so, which ones?

--
-Eric 'shubes'


-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
   Vickers Consulting Group offers Qmailtoaster support and installations.
 If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.

 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com

For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

RE: [qmailtoaster] Re: error

2010-09-20 Thread Noel Rivera (Border Less)

I have this problem one more time and the clamd log has this lines

09-20 15:32:12 /var/qmail/simscan/1285018324.451159.12143/textfile0: OK
09-20 15:32:12 /var/qmail/simscan/1285018324.451159.12143/textfile1: OK
09-20 15:32:12 /var/qmail/simscan/1285018324.451159.12143/textfile2: OK
09-20 15:32:12 /var/qmail/simscan/1285018324.451159.12143/image001.jpg: OK
09-20 15:32:41 Waiting for all threads to finish
09-20 15:32:44 Client disconnected while scanjob was active

To solve this problem temporally I need to restart the Qmail Server.

-Original Message-
From: Eric Shubert [mailto:e...@shubes.net] 
Sent: Monday, September 20, 2010 2:11 PM
To: qmailtoaster-list@qmailtoaster.com
Subject: [qmailtoaster] Re: error

Noel Rivera (Border Less) wrote:
> Hello List In a few days I have this error in my qmail server, any ideas 
> to solve this problem?
> 
> Thanks for your help
> 
> @40004c97b94f1d8935ec qmail-smtpd: qq soft reject (mail server 
> temporarily rejected message (#4.3.0)): MAILFROM:

You haven't given us much to go on Noel, so the best anyone can do is guess.

Do you get this message on every email, or just occasionally?

This error can be caused by a number of things. As Jake pointed out, an 
out of date clamav package can cause this. Some sort of scanning issue 
is usually the culprit with this error. What do your spam and clamd logs 
show which corresponds to this log entry?

You'll need to translate the times in your logs to make any sense of 
them. Either use the qmlog utility (with qmailtoaster-plus package), or 
translate manually with tai64nlocal utility.

-- 
-Eric 'shubes'

-
Qmailtoaster is sponsored by Vickers Consulting Group
(www.vickersconsulting.com)
Vickers Consulting Group offers Qmailtoaster support and installations.
  If you need professional help with your setup, contact them today!

-
 Please visit qmailtoaster.com for the latest news, updates, and
packages.

  To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail:
qmailtoaster-list-h...@qmailtoaster.com

-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
Vickers Consulting Group offers Qmailtoaster support and installations.
  If you need professional help with your setup, contact them today!
-
 Please visit qmailtoaster.com for the latest news, updates, and packages.

  To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

RE: [qmailtoaster] Re: error

2010-09-20 Thread Noel Rivera (Border Less)

Hello Eric thanks for your reply

 

 

You haven't given us much to go on Noel, so the best anyone can do is guess.

 

Do you get this message on every email, or just occasionally?

When I have this error, the message is on every mail

 

This error can be caused by a number of things. As Jake pointed out, an out
of date clamav package can cause this. Some sort of scanning issue is
usually the culprit with this error. What do your spam and clamd logs show
which corresponds to this log entry?

I recently updated the clamav program and rebuild the clamav and the simscan
packages.

The clamav log is clean I have this line in the spamd log

09-20 12:38:49 [16035] info: prefork: server reached --max-children setting,
consider raising it

 

Can you thing I have this error for this line?

And how to solve this problem thanks.

 

 

You'll need to translate the times in your logs to make any sense of them.
Either use the qmlog utility (with qmailtoaster-plus package), or translate
manually with tai64nlocal utility.

 

 

--

-Eric 'shubes'

[qmailtoaster] Re: error

2010-09-20 Thread Eric Shubert


Noel Rivera (Border Less) wrote:
Hello List In a few days I have this error in my qmail server, any ideas 
to solve this problem?


Thanks for your help

@40004c97b94f1d8935ec qmail-smtpd: qq soft reject (mail server 
temporarily rejected message (#4.3.0)): MAILFROM:


You haven't given us much to go on Noel, so the best anyone can do is guess.

Do you get this message on every email, or just occasionally?

This error can be caused by a number of things. As Jake pointed out, an 
out of date clamav package can cause this. Some sort of scanning issue 
is usually the culprit with this error. What do your spam and clamd logs 
show which corresponds to this log entry?


You'll need to translate the times in your logs to make any sense of 
them. Either use the qmlog utility (with qmailtoaster-plus package), or 
translate manually with tai64nlocal utility.


--
-Eric 'shubes'


-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
   Vickers Consulting Group offers Qmailtoaster support and installations.
 If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.

 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com

For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: Error while updating Clam AV

2010-08-20 Thread Eric Shubert


Perhaps we should ask this on the clamav list. Any takers?
--
-Eric 'shubes'

Amit Dalia wrote:

Hi Philip,

Yes I'm getting lot of them but it is 32 bit OS.

Regards,

Amit

At Friday, 20-08-2010 on 2:25 Philip Nix Guru wrote:



On 08/19/2010 09:56 PM, Eric Shubert wrote:

Amit Dalia wrote:

Hi Everyone,

I'm getting below error while updating clamAV. What is this exactly?

./llvm/include/llvm/Target/TargetInstrInfo.h:478: warning: unused
parameter 'MI'
./llvm/include/llvm/Target/TargetInstrInfo.h:496: warning: unused
parameter 'Pred1'
./llvm/include/llvm/Target/TargetInstrInfo.h:496: warning: unused
parameter 'Pred2'
./llvm/include/llvm/Target/TargetInstrInfo.h:504: warning: unused
parameter 'MI'
./llvm/include/llvm/Target/TargetInstrInfo.h:504: warning: unused
parameter 'Pred'
./llvm/include/llvm/Target/TargetInstrInfo.h:517: warning: unused
parameter 'RC'
./llvm/include/llvm/Target/TargetInstrInfo.h:523: warning: unused
parameter 'MI'
  CXXOptimizeExts.lo


Please help.

Thanks and Regards,

Amit


I don't know exactly. Looks like warning messages to me, which
usually are not a significant problem. It'd be nice if developers
would clean them up though.


Hello
I suppose you are getting that on a 64bit OS ?
and you are getting a lot of them right? :)





-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
   Vickers Consulting Group offers Qmailtoaster support and installations.
 If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.

 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com

For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Re: Error while updating Clam AV

2010-08-19 Thread Amit Dalia

Hi Philip,

Yes I'm getting lot of them but it is 32 bit OS.

Regards,

Amit

At Friday, 20-08-2010 on 2:25 Philip Nix Guru wrote:

On 08/19/2010 09:56 PM, Eric Shubert wrote: 

Amit Dalia wrote: 

Hi Everyone, 

I'm getting below error while updating clamAV. What is this exactly? 

./llvm/include/llvm/Target/TargetInstrInfo.h:478: warning: unused
parameter 'MI' 
./llvm/include/llvm/Target/TargetInstrInfo.h:496: warning: unused
parameter 'Pred1' 
./llvm/include/llvm/Target/TargetInstrInfo.h:496: warning: unused
parameter 'Pred2' 
./llvm/include/llvm/Target/TargetInstrInfo.h:504: warning: unused
parameter 'MI' 
./llvm/include/llvm/Target/TargetInstrInfo.h:504: warning: unused
parameter 'Pred' 
./llvm/include/llvm/Target/TargetInstrInfo.h:517: warning: unused
parameter 'RC' 
./llvm/include/llvm/Target/TargetInstrInfo.h:523: warning: unused
parameter 'MI' 
  CXX    OptimizeExts.lo 

Please help. 

Thanks and Regards, 

Amit 

I don't know exactly. Looks like warning messages to me, which
usually are not a significant problem. It'd be nice if developers
would clean them up though. 

 Hello
I suppose you are getting that on a 64bit OS ?
and you are getting a lot of them right? :)

Re: [qmailtoaster] Re: Error while updating Clam AV

2010-08-19 Thread Philip Nix Guru




On 08/19/2010 09:56 PM, Eric Shubert wrote:

Amit Dalia wrote:

Hi Everyone,

I'm getting below error while updating clamAV. What is this exactly?

./llvm/include/llvm/Target/TargetInstrInfo.h:478: warning: unused 
parameter 'MI'
./llvm/include/llvm/Target/TargetInstrInfo.h:496: warning: unused 
parameter 'Pred1'
./llvm/include/llvm/Target/TargetInstrInfo.h:496: warning: unused 
parameter 'Pred2'
./llvm/include/llvm/Target/TargetInstrInfo.h:504: warning: unused 
parameter 'MI'
./llvm/include/llvm/Target/TargetInstrInfo.h:504: warning: unused 
parameter 'Pred'
./llvm/include/llvm/Target/TargetInstrInfo.h:517: warning: unused 
parameter 'RC'
./llvm/include/llvm/Target/TargetInstrInfo.h:523: warning: unused 
parameter 'MI'

  CXXOptimizeExts.lo


Please help.

Thanks and Regards,

Amit


I don't know exactly. Looks like warning messages to me, which usually 
are not a significant problem. It'd be nice if developers would clean 
them up though.



Hello
I suppose you are getting that on a 64bit OS ?
and you are getting a lot of them right? :)

[qmailtoaster] Re: Error while updating Clam AV

2010-08-19 Thread Eric Shubert


Amit Dalia wrote:

Hi Everyone,

I'm getting below error while updating clamAV. What is this exactly?

./llvm/include/llvm/Target/TargetInstrInfo.h:478: warning: unused 
parameter 'MI'
./llvm/include/llvm/Target/TargetInstrInfo.h:496: warning: unused 
parameter 'Pred1'
./llvm/include/llvm/Target/TargetInstrInfo.h:496: warning: unused 
parameter 'Pred2'
./llvm/include/llvm/Target/TargetInstrInfo.h:504: warning: unused 
parameter 'MI'
./llvm/include/llvm/Target/TargetInstrInfo.h:504: warning: unused 
parameter 'Pred'
./llvm/include/llvm/Target/TargetInstrInfo.h:517: warning: unused 
parameter 'RC'
./llvm/include/llvm/Target/TargetInstrInfo.h:523: warning: unused 
parameter 'MI'

  CXXOptimizeExts.lo


Please help.

Thanks and Regards,

Amit


I don't know exactly. Looks like warning messages to me, which usually 
are not a significant problem. It'd be nice if developers would clean 
them up though.


--
-Eric 'shubes'


-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
   Vickers Consulting Group offers Qmailtoaster support and installations.
 If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.

 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com

For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: Error message on the server CNAME_lookup_failed_temporarily

2010-07-13 Thread Eric Shubert


Malvin Rito wrote:

Hi List,

I'm running my qmailtoaster server for almost a year now, today I've noticed
that email from yesterday 9:30PM-today 8:02 AM was delayed and we just
received it at around 10AM today. When I check the Qmail Toaster Server SEND
log I've seen several errors message similar to this: 


2010-07-13 06:50:12.196200500 delivery 561311: deferral:
CNAME_lookup_failed_temporarily._(#4.4.3)/

What does it mean and can I prevent this error from happening again?

Thanks,
Malvin

-


There was a problem with your DNS resolver. What's in your 
/etc/resolv.conf file?


--
-Eric 'shubes'


-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
   Vickers Consulting Group offers Qmailtoaster support and installations.
 If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.

 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com

For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Re: Error while sending mail

2010-06-28 Thread Amit Dalia

Hi Jim,

This will help you up.
http://wiki.qmailtoaster.com/index.php/Outlook_problems_and_possible_solutions

Regards,

Amit

At Monday, 28-06-2010 on 19:12 Jim Shupert wrote:

not trying to hijack a thread - but in regards to:
...Outlook is riddled with other problems I'd rather not get
into"
I would be interested in knowing more regarding outlook and
problems..
love to know more -
just curious - thanks!

Eric Shubert wrote: 

Amit, 

There's a difference between an immediate error and a bounce. I think
what you have here is a failure to submit (immediate error), not a
bounce. A bounce would be a message that has been successfully
submitted, but failed to be delivered within a certain time period. 

This is an interesting dilemma. The first thought that came to my
mind was that if they used MS Outlook, they wouldn't have this
problem, since Outlook has its own mail queue. That's not really a
good thing imo, and don't recommend it as a solution. Outlook is
riddled with other problems I'd rather not get into. 

Your real problem here is internet availability. Solve that, and this
problem goes away with it. 

You should have a caching nameserver (resolver) on your QMT. If you
don't, install the caching-nameserver package (CentOS) and set your
resolv.conf file accordingly (nameserver 127.0.0.1). This will cache
domain names, so if someone sends to a domain that was looked up
recently, they wouldn't get this error. I expect this might help a
little, but not entirely. 

Unfortunately, there doesn't appear to be a way to disable this check
in the tcp.smtp file. 

Hey Tonino (the chkuser author sometimes lurks here), am I right on
this? Do you have a suggestion? I was thinking that perhaps chkuser
shouldn't return an error on 4xx conditions, only 5xx conditions. What
yo you think? 

If Tonino doesn't see this, you might want to contact him on the
vpopmail users list.

Re: [qmailtoaster] Re: Error while sending mail

2010-06-28 Thread Jim Shupert


not trying to hijack a thread - but in regards to:
...Outlook is riddled with other problems I'd rather not get into"
I would be interested in knowing more regarding outlook and problems..
love to know more -
just curious - thanks!

Eric Shubert wrote:

Amit,

There's a difference between an immediate error and a bounce. I think 
what you have here is a failure to submit (immediate error), not a 
bounce. A bounce would be a message that has been successfully 
submitted, but failed to be delivered within a certain time period.


This is an interesting dilemma. The first thought that came to my mind 
was that if they used MS Outlook, they wouldn't have this problem, 
since Outlook has its own mail queue. That's not really a good thing 
imo, and don't recommend it as a solution. Outlook is riddled with 
other problems I'd rather not get into.


Your real problem here is internet availability. Solve that, and this 
problem goes away with it.


You should have a caching nameserver (resolver) on your QMT. If you 
don't, install the caching-nameserver package (CentOS) and set your 
resolv.conf file accordingly (nameserver 127.0.0.1). This will cache 
domain names, so if someone sends to a domain that was looked up 
recently, they wouldn't get this error. I expect this might help a 
little, but not entirely.


Unfortunately, there doesn't appear to be a way to disable this check 
in the tcp.smtp file.


Hey Tonino (the chkuser author sometimes lurks here), am I right on 
this? Do you have a suggestion? I was thinking that perhaps chkuser 
shouldn't return an error on 4xx conditions, only 5xx conditions. What 
yo you think?


If Tonino doesn't see this, you might want to contact him on the 
vpopmail users list.

[qmailtoaster] Re: Error while sending mail

2010-06-25 Thread Eric Shubert

To check the status of the local caching nameserver:
# service named status

If you have an interface on your QMT that uses dhcp, that can overwrite 
your resolv.conf file. Your interface(s) on your QMT should be defined 
as static.

Once you have your caching nameserver installed, your resolv.conf file 
should contain "nameserver 127.0.0.1" as the first entry. As a backup, 
in the event that your caching nameserver has a problem, you might want 
to add "nameserver 208.67.222.220" and/or "nameserver 208.67.222.222" 
(opendns.org resolvers). Or you could use your internet provider's 
resolver(s) if you'd like. They'd likely be a tiny bit faster (because 
they're closer).

You can use the 'dig' command to test your local resolver, as well as 
other resolvers. 'man dig' for options.

--
-Eric 'shubes'

Amit Dalia wrote:
Today after configuring local DNS I think my caching DNS was break. It 
doesn't had entry "nameserver 127.0.0.1". So reinstalling 
caching-nameserver.

Lets see if it solves the problem.
Thanks Eric and Martin. Will update you back by tomorrow.

Regards,

Amit

At Friday, 25-06-2010 on 23:49 Maxwell Smart wrote:

Of course the caching-nameserver is the best way, but under certain
circumstances I have used the host file successfully for testing. This
however was for web not mail services.

On 06/25/2010 10:49 AM, Eric Shubert wrote:
 > I don't believe the hosts file will be of any help. There are 2
 > different ways of resolving names. I don't recall the details, but
 > IIRC one includes the hosts file and the other doesn't. I expect that
 > chkuser uses the one that doesn't include hosts, and even if chkuser
 > used the method that includes the hosts file, it would fail obtaining
 > the MX record for the domain.
 >
 > I'm curious to know, Amit, do you have a caching-nameserver on your
 > host, and do you have "nameserver 127.0.0.1" listed first in your
 > resolv.conf file?
 >

-- 
Cecil Yother, Jr. "cj"

cj's
2318 Clement Ave
Alameda, CA 94501

tel 510.865.2787 | fax 510.864.7300
http://yother.com

-
Qmailtoaster is sponsored by Vickers Consulting Group
(www.vickersconsulting.com)
Vickers Consulting Group offers Qmailtoaster support and installations.
If you need professional help with your setup, contact them today!

-
Please visit qmailtoaster.com for the latest news, updates, and
packages.

To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
   Vickers Consulting Group offers Qmailtoaster support and installations.
 If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.

 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com

For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Re: Error while sending mail

2010-06-25 Thread Amit Dalia

Today after configuring local DNS I think my caching DNS was break. It
doesn't had entry "nameserver 127.0.0.1". So reinstalling
caching-nameserver.

Lets see if it solves the problem.
Thanks Eric and Martin. Will update you back by tomorrow.

Regards,

Amit

At Friday, 25-06-2010 on 23:49 Maxwell Smart wrote:

Of course the caching-nameserver is the best way, but under certain
circumstances I have used the host file successfully for testing.
This
however was for web not mail services.

On 06/25/2010 10:49 AM, Eric Shubert wrote:
> I don't believe the hosts file will be of any help. There are 2
> different ways of resolving names. I don't recall the details, but
> IIRC one includes the hosts file and the other doesn't. I expect
that
> chkuser uses the one that doesn't include hosts, and even if
chkuser
> used the method that includes the hosts file, it would fail
obtaining
> the MX record for the domain.
>
> I'm curious to know, Amit, do you have a caching-nameserver on your
> host, and do you have "nameserver 127.0.0.1" listed first in your
> resolv.conf file?
>

-- 
Cecil Yother, Jr. "cj"
cj's
2318 Clement Ave
Alameda, CA 94501

tel 510.865.2787 | fax 510.864.7300
http://yother.com

-
Qmailtoaster is sponsored by Vickers Consulting Group
(www.vickersconsulting.com)
Vickers Consulting Group offers Qmailtoaster support and
installations.
If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and
packages.

To unsubscribe, e-mail:
qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail:
qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Re: Error while sending mail

2010-06-25 Thread Maxwell Smart

Of course the caching-nameserver is the best way, but under certain
circumstances I have used the host file successfully for testing.  This
however was for web not mail services.

On 06/25/2010 10:49 AM, Eric Shubert wrote:
> I don't believe the hosts file will be of any help. There are 2
> different ways of resolving names. I don't recall the details, but
> IIRC one includes the hosts file and the other doesn't. I expect that
> chkuser uses the one that doesn't include hosts, and even if chkuser
> used the method that includes the hosts file, it would fail obtaining
> the MX record for the domain.
>
> I'm curious to know, Amit, do you have a caching-nameserver on your
> host, and do you have "nameserver 127.0.0.1" listed first in your
> resolv.conf file?
>

-- 
Cecil Yother, Jr. "cj"
cj's
2318 Clement Ave
Alameda, CA  94501

tel 510.865.2787 | fax 510.864.7300
http://yother.com

-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
Vickers Consulting Group offers Qmailtoaster support and installations.
  If you need professional help with your setup, contact them today!
-
 Please visit qmailtoaster.com for the latest news, updates, and packages.

  To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: Error while sending mail

2010-06-25 Thread Eric Shubert

I don't believe the hosts file will be of any help. There are 2 
different ways of resolving names. I don't recall the details, but IIRC 
one includes the hosts file and the other doesn't. I expect that chkuser 
uses the one that doesn't include hosts, and even if chkuser used the 
method that includes the hosts file, it would fail obtaining the MX 
record for the domain.


I'm curious to know, Amit, do you have a caching-nameserver on your 
host, and do you have "nameserver 127.0.0.1" listed first in your 
resolv.conf file?


--
-Eric 'shubes'

Maxwell Smart wrote:

I don't know how large your network is so adding an entry in the hosts
file may not be an option, but if it's not too much trouble that is
certainly a partial solution if domain/ip's that are being accessed
don't change that frequently.  It has some limitations, but if it's all
local intranet it won't be an issue.

On 06/25/2010 09:49 AM, Eric Shubert wrote:

Amit,

There's a difference between an immediate error and a bounce. I think
what you have here is a failure to submit (immediate error), not a
bounce. A bounce would be a message that has been successfully
submitted, but failed to be delivered within a certain time period.

This is an interesting dilemma. The first thought that came to my mind
was that if they used MS Outlook, they wouldn't have this problem,
since Outlook has its own mail queue. That's not really a good thing
imo, and don't recommend it as a solution. Outlook is riddled with
other problems I'd rather not get into.

Your real problem here is internet availability. Solve that, and this
problem goes away with it.

You should have a caching nameserver (resolver) on your QMT. If you
don't, install the caching-nameserver package (CentOS) and set your
resolv.conf file accordingly (nameserver 127.0.0.1). This will cache
domain names, so if someone sends to a domain that was looked up
recently, they wouldn't get this error. I expect this might help a
little, but not entirely.

Unfortunately, there doesn't appear to be a way to disable this check
in the tcp.smtp file.

Hey Tonino (the chkuser author sometimes lurks here), am I right on
this? Do you have a suggestion? I was thinking that perhaps chkuser
shouldn't return an error on 4xx conditions, only 5xx conditions. What
yo you think?

If Tonino doesn't see this, you might want to contact him on the
vpopmail users list.






--
-Eric 'shubes'


-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
   Vickers Consulting Group offers Qmailtoaster support and installations.
 If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.

 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com

For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Re: Error while sending mail

2010-06-25 Thread Maxwell Smart

I don't know how large your network is so adding an entry in the hosts
file may not be an option, but if it's not too much trouble that is
certainly a partial solution if domain/ip's that are being accessed
don't change that frequently.  It has some limitations, but if it's all
local intranet it won't be an issue.

On 06/25/2010 09:49 AM, Eric Shubert wrote:
> Amit,
>
> There's a difference between an immediate error and a bounce. I think
> what you have here is a failure to submit (immediate error), not a
> bounce. A bounce would be a message that has been successfully
> submitted, but failed to be delivered within a certain time period.
>
> This is an interesting dilemma. The first thought that came to my mind
> was that if they used MS Outlook, they wouldn't have this problem,
> since Outlook has its own mail queue. That's not really a good thing
> imo, and don't recommend it as a solution. Outlook is riddled with
> other problems I'd rather not get into.
>
> Your real problem here is internet availability. Solve that, and this
> problem goes away with it.
>
> You should have a caching nameserver (resolver) on your QMT. If you
> don't, install the caching-nameserver package (CentOS) and set your
> resolv.conf file accordingly (nameserver 127.0.0.1). This will cache
> domain names, so if someone sends to a domain that was looked up
> recently, they wouldn't get this error. I expect this might help a
> little, but not entirely.
>
> Unfortunately, there doesn't appear to be a way to disable this check
> in the tcp.smtp file.
>
> Hey Tonino (the chkuser author sometimes lurks here), am I right on
> this? Do you have a suggestion? I was thinking that perhaps chkuser
> shouldn't return an error on 4xx conditions, only 5xx conditions. What
> yo you think?
>
> If Tonino doesn't see this, you might want to contact him on the
> vpopmail users list.
>

-- 
Cecil Yother, Jr. "cj"
cj's
2318 Clement Ave
Alameda, CA  94501

tel 510.865.2787 | fax 510.864.7300
http://yother.com


-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
Vickers Consulting Group offers Qmailtoaster support and installations.
  If you need professional help with your setup, contact them today!
-
 Please visit qmailtoaster.com for the latest news, updates, and packages.
 
  To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: Error while sending mail

2010-06-25 Thread Eric Shubert


Amit,

There's a difference between an immediate error and a bounce. I think 
what you have here is a failure to submit (immediate error), not a 
bounce. A bounce would be a message that has been successfully 
submitted, but failed to be delivered within a certain time period.


This is an interesting dilemma. The first thought that came to my mind 
was that if they used MS Outlook, they wouldn't have this problem, since 
Outlook has its own mail queue. That's not really a good thing imo, and 
don't recommend it as a solution. Outlook is riddled with other problems 
I'd rather not get into.


Your real problem here is internet availability. Solve that, and this 
problem goes away with it.


You should have a caching nameserver (resolver) on your QMT. If you 
don't, install the caching-nameserver package (CentOS) and set your 
resolv.conf file accordingly (nameserver 127.0.0.1). This will cache 
domain names, so if someone sends to a domain that was looked up 
recently, they wouldn't get this error. I expect this might help a 
little, but not entirely.


Unfortunately, there doesn't appear to be a way to disable this check in 
the tcp.smtp file.


Hey Tonino (the chkuser author sometimes lurks here), am I right on 
this? Do you have a suggestion? I was thinking that perhaps chkuser 
shouldn't return an error on 4xx conditions, only 5xx conditions. What 
yo you think?


If Tonino doesn't see this, you might want to contact him on the 
vpopmail users list.


--
-Eric 'shubes'

Amit Dalia wrote:

Hi Eric/Maxwell,

Thanks local DNS solved the problem. Another issue with that client is 
the below error:


  'ami...@rediffmail.com ' on 
25/06/2010 05:27 PM

  451 DNS temporary failure (#4.5.1 - chkuser)

When there internet is down and if any user send mail to external domain 
they immediately get above bounced message. I explained them it is 
because DNS is not resolvable when internet is down. But they want mail 
should be in queue atleast for 24 hrs even if internet is down. I 
increased queue life to 24 hrs but no success.


How can I stop such bounce message to user for 24 hrs? Else how can stop 
this bounce message completely from my QMT server.


Regards,

Amit




-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
   Vickers Consulting Group offers Qmailtoaster support and installations.
 If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.

 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com

For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: Error while sending mail

2010-06-25 Thread Amit Dalia

Hi Eric/Maxwell,

Thanks local DNS solved the problem. Another issue with that client
is the below error:

  'ami...@rediffmail.com [1]' on 25/06/2010 05:27 PM
  451 DNS temporary failure (#4.5.1 - chkuser)

When there internet is down and if any user send mail to external
domain they immediately get above bounced message. I explained them it
is because DNS is not resolvable when internet is down. But they want
mail should be in queue atleast for 24 hrs even if internet is down. I
increased queue life to 24 hrs but no success.

How can I stop such bounce message to user for 24 hrs? Else how can
stop this bounce message completely from my QMT server.

Regards,

Amit

At Wednesday, 23-06-2010 on 22:07 Eric Shubert wrote:

Amit Dalia wrote:
> 
> There ERP software needs only few things like incoming server,
> outgoing server, sender id and receiver id. Now here sender id and
> receiver id are from local domain of QMT. But getting error "421
> Refused. Your reverse DNS entry does not resolve" in their ERP
> software.

I'm not getting a clear picture of what the ERP software is doing. I 
don't know why it cares whether or not there's an rDNS entry, unless 
it's receiving mail itself.

None the less, this appears to be a problem with name resolution.
Once 
again, I think you'll need to configure AD's name resolution to
satisfy 
this. I presume AD handles rDNS as well.

> >> 3) I want to disable RDNS check for local ips. How to do this
> and any
> >> harm in doing this?
> 
> Do you use spamdyke? If not, install it. That will solve this
problem.
> Alternatively, you can configure local clients to use port 587.
> 
> Yes, I'm using Spamdyke. There is no option for port else I
planning
> to change smtp port to 587.

Changing to port 587 won't help this.

Apparently you have some local clients that aren't authenticating, 
otherwise spamdyke would allow them to send.

You can allow unauthenticated senders by whitelisting the local IPs
that 
do not authenticate, although this is generally a bad practice. You 
should make every effort possible to configure all clients to 
authenticate before resorting to whitelisting IPs. Also, whitelisting

IPs in spamdyke will only allow unauthenticated senders to send to
local 
domains. If you need to allow unauthenticated senders to send to 
external domains (a very bad practice), you'll need to add an entry
in 
your tcp.smtp file as well.

-- 
-Eric 'shubes'

-
Qmailtoaster is sponsored by Vickers Consulting Group
(www.vickersconsulting.com)
Vickers Consulting Group offers Qmailtoaster support and
installations.
If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and
packages.

To unsubscribe, e-mail:
qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail:
qmailtoaster-list-h...@qmailtoaster.com

Links:
--
[1] mailto:b_thomb...@rediffmail.com

[qmailtoaster] Re: Error while sending mail

2010-06-23 Thread Amit Dalia

Thanks Eric,

Will try to check and configure with AD DNS and update you by
tomorrow.

Regards,

Amit

At Wednesday, 23-06-2010 on 22:07 Eric Shubert wrote:

Amit Dalia wrote:
> 
> There ERP software needs only few things like incoming server,
> outgoing server, sender id and receiver id. Now here sender id and
> receiver id are from local domain of QMT. But getting error "421
> Refused. Your reverse DNS entry does not resolve" in their ERP
> software.

I'm not getting a clear picture of what the ERP software is doing. I 
don't know why it cares whether or not there's an rDNS entry, unless 
it's receiving mail itself.

None the less, this appears to be a problem with name resolution.
Once 
again, I think you'll need to configure AD's name resolution to
satisfy 
this. I presume AD handles rDNS as well.

> >> 3) I want to disable RDNS check for local ips. How to do this
> and any
> >> harm in doing this?
> 
> Do you use spamdyke? If not, install it. That will solve this
problem.
> Alternatively, you can configure local clients to use port 587.
> 
> Yes, I'm using Spamdyke. There is no option for port else I
planning
> to change smtp port to 587.

Changing to port 587 won't help this.

Apparently you have some local clients that aren't authenticating, 
otherwise spamdyke would allow them to send.

You can allow unauthenticated senders by whitelisting the local IPs
that 
do not authenticate, although this is generally a bad practice. You 
should make every effort possible to configure all clients to 
authenticate before resorting to whitelisting IPs. Also, whitelisting

IPs in spamdyke will only allow unauthenticated senders to send to
local 
domains. If you need to allow unauthenticated senders to send to 
external domains (a very bad practice), you'll need to add an entry
in 
your tcp.smtp file as well.

-- 
-Eric 'shubes'

-
Qmailtoaster is sponsored by Vickers Consulting Group
(www.vickersconsulting.com)
Vickers Consulting Group offers Qmailtoaster support and
installations.
If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and
packages.

To unsubscribe, e-mail:
qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail:
qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: Error while sending mail

2010-06-23 Thread Eric Shubert

Amit Dalia wrote:

There ERP software needs only few things like incoming server,
outgoing server, sender id and receiver id. Now here sender id and
receiver id are from local domain of QMT. But getting error "421
Refused. Your reverse DNS entry does not resolve" in their ERP
software.

I'm not getting a clear picture of what the ERP software is doing. I 
don't know why it cares whether or not there's an rDNS entry, unless 
it's receiving mail itself.

None the less, this appears to be a problem with name resolution. Once 
again, I think you'll need to configure AD's name resolution to satisfy 
this. I presume AD handles rDNS as well.

 >> 3) I want to disable RDNS check for local ips. How to do this
and any
 >> harm in doing this?

Do you use spamdyke? If not, install it. That will solve this problem.
Alternatively, you can configure local clients to use port 587.

Yes, I'm using Spamdyke. There is no option for port else I planning
to change smtp port to 587.

Changing to port 587 won't help this.

Apparently you have some local clients that aren't authenticating, 
otherwise spamdyke would allow them to send.

You can allow unauthenticated senders by whitelisting the local IPs that 
do not authenticate, although this is generally a bad practice. You 
should make every effort possible to configure all clients to 
authenticate before resorting to whitelisting IPs. Also, whitelisting 
IPs in spamdyke will only allow unauthenticated senders to send to local 
domains. If you need to allow unauthenticated senders to send to 
external domains (a very bad practice), you'll need to add an entry in 
your tcp.smtp file as well.

--
-Eric 'shubes'

-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
   Vickers Consulting Group offers Qmailtoaster support and installations.
 If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.

 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com

For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: Error while sending mail

2010-06-23 Thread Amit Dalia

Hi Eric/Maxwell,

At Wednesday, 23-06-2010 on 21:19 Eric Shubert wrote:

Maxwell Smart wrote:
> Wouldn't it be easier to setup a local DNS server for the local
network?
> 
> On 06/23/2010 07:17 AM, Amit Dalia wrote:
>> Hi Everyone,
>>
>> First of all I'll explain my scenario. My QMT server is placed in
a 
>> network which contain 1 Windows AD server and all PCs excemt QMT
are 
>> members of AD. All PCs are able to ping QMT server.
>> My queries:
>> 1) If internet is down all users are getting error "DNS temporary 
>> unavailable" in their outlook. Even local mails are not getting
delivered.

I don't know much about AD, but my impression is that it likes to be
the 
boss of everything (typical for MS). So I think the answer to Max's 
question is: yes, and no. ;)

Bind has the capability of having multiple views, which can be set up

for internal and external views. So if a computer inquires internally

(from the lan), then the local address is given, and if an external 
computer inquires (from the internet), the public address is given.

This is essentially what AD's name resolution needs to do to solve
this. 
I don't know if this can be done with AD, nor how to make AD do it.

If AD can't do it, I would use a different name for the internal 
address. That way you'll still have internal access with the internet
is 
down.

OK will try to configure local dns in AD and then re-check.

>> 2) They got 1 ERP software in network which sends mail to their 
>> client. After putting QMT, ERP software is unable to send mail
from 
>> QMT and give error RDNS failed. There is no port option in ERP 
>> software else I would have given submission port.

The port doesn't really matter.
What's the domain name that the ERP software is using? Can you
configure 
it in the ERP software?

There ERP software needs only few things like incoming server,
outgoing server, sender id and receiver id. Now here sender id and
receiver id are from local domain of QMT. But getting error "421
Refused. Your reverse DNS entry does not resolve" in their ERP
software. 

>> 3) I want to disable RDNS check for local ips. How to do this and
any 
>> harm in doing this?

Do you use spamdyke? If not, install it. That will solve this
problem. 
Alternatively, you can configure local clients to use port 587.

Yes, I'm using Spamdyke. There is no option for port else I planning
to change smtp port to 587. 

>> 4) How to disable MX check on my QMT.

Why? Is this related to #1?

Disabling MX check is not a very good idea, as bounces would have 
nowhere to go.

Yes it is related to #1. Anyway will try will local DNS.

-- 
-Eric 'shubes'

-
Qmailtoaster is sponsored by Vickers Consulting Group
(www.vickersconsulting.com)
Vickers Consulting Group offers Qmailtoaster support and
installations.
If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and
packages.

To unsubscribe, e-mail:
qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail:
qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: Error while sending mail

2010-06-23 Thread Eric Shubert


Maxwell Smart wrote:

Wouldn't it be easier to setup a local DNS server for the local network?

On 06/23/2010 07:17 AM, Amit Dalia wrote:

Hi Everyone,

First of all I'll explain my scenario. My QMT server is placed in a 
network which contain 1 Windows AD server and all PCs excemt QMT are 
members of AD. All PCs are able to ping QMT server.

My queries:
1) If internet is down all users are getting error "DNS temporary 
unavailable" in their outlook. Even local mails are not getting delivered.


I don't know much about AD, but my impression is that it likes to be the 
boss of everything (typical for MS). So I think the answer to Max's 
question is: yes, and no. ;)


Bind has the capability of having multiple views, which can be set up 
for internal and external views. So if a computer inquires internally 
(from the lan), then the local address is given, and if an external 
computer inquires (from the internet), the public address is given.


This is essentially what AD's name resolution needs to do to solve this. 
I don't know if this can be done with AD, nor how to make AD do it.


If AD can't do it, I would use a different name for the internal 
address. That way you'll still have internal access with the internet is 
down.


2) They got 1 ERP software in network which sends mail to their 
client. After putting QMT, ERP software is unable to send mail from 
QMT and give error RDNS failed. There is no port option in ERP 
software else I would have given submission port.


The port doesn't really matter.
What's the domain name that the ERP software is using? Can you configure 
it in the ERP software?


3) I want to disable RDNS check for local ips. How to do this and any 
harm in doing this?


Do you use spamdyke? If not, install it. That will solve this problem. 
Alternatively, you can configure local clients to use port 587.



4) How to disable MX check on my QMT.


Why? Is this related to #1?

Disabling MX check is not a very good idea, as bounces would have 
nowhere to go.


--
-Eric 'shubes'


-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
   Vickers Consulting Group offers Qmailtoaster support and installations.
 If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.

 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com

For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Re: Error while restarting qmail

2010-06-22 Thread Aleksander Podsiadły

Dnia 2010-06-22, wto o godzinie 15:04 -0700, Eric Shubert pisze:
> Has anyone who is running dovecot IMAP and POP3 remove the 
> courier-authlib-toaster package? 

I do, nothing breaks.
I removed courier-authlib-toaster, courier-imap-toaster and
qmail-pop3d-toaster:
http://www.mail-archive.com/qmailtoaster-list@qmailtoaster.com/msg24761.html
and next messages in this thread.

-- 
Pozdrawiam / Regards,
Aleksander Podsiadły
mail: a...@westside.kielce.pl
jid: a...@jabber.westside.kielce.pl
ICQ: 201121279
gg: 9150578


-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
Vickers Consulting Group offers Qmailtoaster support and installations.
  If you need professional help with your setup, contact them today!
-
 Please visit qmailtoaster.com for the latest news, updates, and packages.
 
  To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Re: Error while restarting qmail

2010-06-22 Thread Finn Buhelt


Hi Eric.

Yes, I have removed courier-authlib-toaster and courier-imap-toaster when I 
installed Dovecot some months ago - no problemo - I think Amit was the 
contributor of the way to install.


Regards,

Finn


- Original Message - 
From: "Eric Shubert" 

To: 
Sent: Wednesday, June 23, 2010 12:04 AM
Subject: [qmailtoaster] Re: Error while restarting qmail



That's the safe way. ;)

Has anyone who is running dovecot IMAP and POP3 remove the 
courier-authlib-toaster package? Would someone like to try it to see if 
anything breaks? (Please don't try this on a production host)


--
-Eric 'shubes'

Amit Dalia wrote:

Hi Eric,

I'm using Dovecot. And I prefer touch /var/qmail/supervise/authlib/down.

Regards,

Amit

At Wednesday, 23-06-2010 on 1:56 Eric Shubert wrote:

Which did you choose to do?

Amit Dalia wrote:
 > Thanks Eric,
 >
 > That solved the problem.
 >
 > Regards,
 >
 > Amit
 >
 > At Wednesday, 23-06-2010 on 1:19 Eric Shubert wrote:
 >
 > Oops - I had a typo. It's envconv, not envconf.
 >
 > That's part of several scripts:
 > # find /var/qmail/supervise -name run -exec grep -H envconv {} \;
 > /var/qmail/supervise/pop3-ssl/run:cat /etc/courier/pop3d-ssl |
 > /usr/bin/envconv
 > /var/qmail/supervise/imap4-ssl/run:cat /etc/courier/imapd-ssl |
 > /usr/bin/envconv
 > /var/qmail/supervise/imap4/run:cat /etc/courier/imapd |
/usr/bin/envconv
 > /var/qmail/supervise/authlib/run:cat
 > /etc/courier/authlib/authdaemonrc |
 > /usr/bin/envconv
 > # rpm -qf `which envconv`
 > courier-imap-toaster-4.1.2-1.3.10
 >
 > You've removed courier I take it. I hope you're running dovecot. 
;)

 >
 > If you're running dovecot for pop3 (as well as imap), I'm
guessing that
 > you're getting this from the authlib daemon. As long as you're
running
 > dovecot for everything pop3, pop3-ssl, imap4, and imap4-ssl, I 
don't

 > think you need the authlib daemon running. You can either
 > # touch /var/qmail/supervise/authlib/down
 > or
 > # yum remove courier-authlib-toaster
 >
 > Let us know if that's all right.
 >
 > --
 > -Eric 'shubes'
 >
 > Amit Dalia wrote:
 > > Hi Eric,
 > >
 > > The command you mentioned doesn't give any output. Also I 
noticed

 > if I
 > > do "qmailctl restart" it doesn't give any error. But if I
 > manually stop
 > > and then start qmail it gives the same error.
 > >
 > > Regards,
 > >
 > > Amit
 > >
 > > At Wednesday, 23-06-2010 on 0:56 Eric Shubert wrote:
 > >
 > > Amit Dalia wrote:
 > > > Hi Everyone,
 > > >
 > > > I'm getting below error when I'm restarting qmail.
 > > >
 > > > ./run: line 4: /usr/bin/envconv: No such file or directory
 > > >
 > > >
 > > > Qmail is working fine.
 > > >
 > > > Regards,
 > > >
 > > > Amit
 > >
 > > Which run file is it coming from?
 > > # find /var/qmail/supervise -name run -exec grep -H envconf {} 
\;

 > >
 > > Please post the contents of that file
 > > --
 > > -Eric 'shubes'
 > >
 >
 >
 >

-
 > Qmailtoaster is sponsored by Vickers Consulting Group
 > (www.vickersconsulting.com)
 > Vickers Consulting Group offers Qmailtoaster support and
installations.
 > If you need professional help with your setup, contact them today!
 >

-
 > Please visit qmailtoaster.com for the latest news, updates, and
 > packages.
 >
 > To unsubscribe, e-mail:
qmailtoaster-list-unsubscr...@qmailtoaster.com
 > For additional commands, e-mail:
qmailtoaster-list-h...@qmailtoaster.com
 >


-- 
-Eric 'shubes'




-
Qmailtoaster is sponsored by Vickers Consulting Group
(www.vickersconsulting.com)
Vickers Consulting Group offers Qmailtoaster support and 
installations.

If you need professional help with your setup, contact them today!

-

[qmailtoaster] Re: Error while restarting qmail

2010-06-22 Thread Eric Shubert


That's the safe way. ;)

Has anyone who is running dovecot IMAP and POP3 remove the 
courier-authlib-toaster package? Would someone like to try it to see if 
anything breaks? (Please don't try this on a production host)


--
-Eric 'shubes'

Amit Dalia wrote:

Hi Eric,

I'm using Dovecot. And I prefer touch /var/qmail/supervise/authlib/down.

Regards,

Amit

At Wednesday, 23-06-2010 on 1:56 Eric Shubert wrote:

Which did you choose to do?

Amit Dalia wrote:
 > Thanks Eric,
 >
 > That solved the problem.
 >
 > Regards,
 >
 > Amit
 >
 > At Wednesday, 23-06-2010 on 1:19 Eric Shubert wrote:
 >
 > Oops - I had a typo. It's envconv, not envconf.
 >
 > That's part of several scripts:
 > # find /var/qmail/supervise -name run -exec grep -H envconv {} \;
 > /var/qmail/supervise/pop3-ssl/run:cat /etc/courier/pop3d-ssl |
 > /usr/bin/envconv
 > /var/qmail/supervise/imap4-ssl/run:cat /etc/courier/imapd-ssl |
 > /usr/bin/envconv
 > /var/qmail/supervise/imap4/run:cat /etc/courier/imapd |
/usr/bin/envconv
 > /var/qmail/supervise/authlib/run:cat
 > /etc/courier/authlib/authdaemonrc |
 > /usr/bin/envconv
 > # rpm -qf `which envconv`
 > courier-imap-toaster-4.1.2-1.3.10
 >
 > You've removed courier I take it. I hope you're running dovecot. ;)
 >
 > If you're running dovecot for pop3 (as well as imap), I'm
guessing that
 > you're getting this from the authlib daemon. As long as you're
running
 > dovecot for everything pop3, pop3-ssl, imap4, and imap4-ssl, I don't
 > think you need the authlib daemon running. You can either
 > # touch /var/qmail/supervise/authlib/down
 > or
 > # yum remove courier-authlib-toaster
 >
 > Let us know if that's all right.
 >
 > --
 > -Eric 'shubes'
 >
 > Amit Dalia wrote:
 > > Hi Eric,
 > >
 > > The command you mentioned doesn't give any output. Also I noticed
 > if I
 > > do "qmailctl restart" it doesn't give any error. But if I
 > manually stop
 > > and then start qmail it gives the same error.
 > >
 > > Regards,
 > >
 > > Amit
 > >
 > > At Wednesday, 23-06-2010 on 0:56 Eric Shubert wrote:
 > >
 > > Amit Dalia wrote:
 > > > Hi Everyone,
 > > >
 > > > I'm getting below error when I'm restarting qmail.
 > > >
 > > > ./run: line 4: /usr/bin/envconv: No such file or directory
 > > >
 > > >
 > > > Qmail is working fine.
 > > >
 > > > Regards,
 > > >
 > > > Amit
 > >
 > > Which run file is it coming from?
 > > # find /var/qmail/supervise -name run -exec grep -H envconf {} \;
 > >
 > > Please post the contents of that file
 > > --
 > > -Eric 'shubes'
 > >
 >
 >
 >

-
 > Qmailtoaster is sponsored by Vickers Consulting Group
 > (www.vickersconsulting.com)
 > Vickers Consulting Group offers Qmailtoaster support and
installations.
 > If you need professional help with your setup, contact them today!
 >

-
 > Please visit qmailtoaster.com for the latest news, updates, and
 > packages.
 >
 > To unsubscribe, e-mail:
qmailtoaster-list-unsubscr...@qmailtoaster.com
 > For additional commands, e-mail:
qmailtoaster-list-h...@qmailtoaster.com
 >


-- 
-Eric 'shubes'




-
Qmailtoaster is sponsored by Vickers Consulting Group
(www.vickersconsulting.com)
Vickers Consulting Group offers Qmailtoaster support and installations.
If you need professional help with your setup, contact them today!

-
Please visit qmailtoaster.com for the latest news, updates, and
packages.

To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com




-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
   Vickers Consulting Group offers Qmailtoaster support and installations.
 If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.

 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com

For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: Error while restarting qmail

2010-06-22 Thread Amit Dalia

Hi Eric,

I'm using Dovecot. And I prefer touch
/var/qmail/supervise/authlib/down.

Regards,

Amit

At Wednesday, 23-06-2010 on 1:56 Eric Shubert wrote:

Which did you choose to do?

Amit Dalia wrote:
> Thanks Eric,
> 
> That solved the problem.
> 
> Regards,
> 
> Amit
> 
> At Wednesday, 23-06-2010 on 1:19 Eric Shubert wrote:
> 
> Oops - I had a typo. It's envconv, not envconf.
> 
> That's part of several scripts:
> # find /var/qmail/supervise -name run -exec grep -H envconv {} \;
> /var/qmail/supervise/pop3-ssl/run:cat /etc/courier/pop3d-ssl |
> /usr/bin/envconv
> /var/qmail/supervise/imap4-ssl/run:cat /etc/courier/imapd-ssl |
> /usr/bin/envconv
> /var/qmail/supervise/imap4/run:cat /etc/courier/imapd |
/usr/bin/envconv
> /var/qmail/supervise/authlib/run:cat
> /etc/courier/authlib/authdaemonrc |
> /usr/bin/envconv
> # rpm -qf `which envconv`
> courier-imap-toaster-4.1.2-1.3.10
> 
> You've removed courier I take it. I hope you're running dovecot. ;)
> 
> If you're running dovecot for pop3 (as well as imap), I'm guessing
that
> you're getting this from the authlib daemon. As long as you're
running
> dovecot for everything pop3, pop3-ssl, imap4, and imap4-ssl, I
don't
> think you need the authlib daemon running. You can either
> # touch /var/qmail/supervise/authlib/down
> or
> # yum remove courier-authlib-toaster
> 
> Let us know if that's all right.
> 
> -- 
> -Eric 'shubes'
> 
> Amit Dalia wrote:
> > Hi Eric,
> >
> > The command you mentioned doesn't give any output. Also I noticed
> if I
> > do "qmailctl restart" it doesn't give any error. But if I
> manually stop
> > and then start qmail it gives the same error.
> >
> > Regards,
> >
> > Amit
> >
> > At Wednesday, 23-06-2010 on 0:56 Eric Shubert wrote:
> >
> > Amit Dalia wrote:
> > > Hi Everyone,
> > >
> > > I'm getting below error when I'm restarting qmail.
> > >
> > > ./run: line 4: /usr/bin/envconv: No such file or directory
> > >
> > >
> > > Qmail is working fine.
> > >
> > > Regards,
> > >
> > > Amit
> >
> > Which run file is it coming from?
> > # find /var/qmail/supervise -name run -exec grep -H envconf {} \;
> >
> > Please post the contents of that file
> > --
> > -Eric 'shubes'
> >
> 
> 
>
-
> Qmailtoaster is sponsored by Vickers Consulting Group
> (www.vickersconsulting.com)
> Vickers Consulting Group offers Qmailtoaster support and
installations.
> If you need professional help with your setup, contact them today!
>
-
> Please visit qmailtoaster.com for the latest news, updates, and
> packages.
> 
> To unsubscribe, e-mail:
qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail:
qmailtoaster-list-h...@qmailtoaster.com
> 

-- 
-Eric 'shubes'

-
Qmailtoaster is sponsored by Vickers Consulting Group
(www.vickersconsulting.com)
Vickers Consulting Group offers Qmailtoaster support and
installations.
If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and
packages.

To unsubscribe, e-mail:
qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail:
qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: Error while restarting qmail

2010-06-22 Thread Eric Shubert

Which did you choose to do?

Amit Dalia wrote:

Thanks Eric,

That solved the problem.

Regards,

Amit

At Wednesday, 23-06-2010 on 1:19 Eric Shubert wrote:

Oops - I had a typo. It's envconv, not envconf.

That's part of several scripts:
# find /var/qmail/supervise -name run -exec grep -H envconv {} \;
/var/qmail/supervise/pop3-ssl/run:cat /etc/courier/pop3d-ssl |
/usr/bin/envconv
/var/qmail/supervise/imap4-ssl/run:cat /etc/courier/imapd-ssl |
/usr/bin/envconv
/var/qmail/supervise/imap4/run:cat /etc/courier/imapd | /usr/bin/envconv
/var/qmail/supervise/authlib/run:cat
/etc/courier/authlib/authdaemonrc |
/usr/bin/envconv
# rpm -qf `which envconv`
courier-imap-toaster-4.1.2-1.3.10

You've removed courier I take it. I hope you're running dovecot. ;)

If you're running dovecot for pop3 (as well as imap), I'm guessing that
you're getting this from the authlib daemon. As long as you're running
dovecot for everything pop3, pop3-ssl, imap4, and imap4-ssl, I don't
think you need the authlib daemon running. You can either
# touch /var/qmail/supervise/authlib/down
or
# yum remove courier-authlib-toaster

Let us know if that's all right.

-- 
-Eric 'shubes'

Amit Dalia wrote:
 > Hi Eric,
 >
 > The command you mentioned doesn't give any output. Also I noticed
if I
 > do "qmailctl restart" it doesn't give any error. But if I
manually stop
 > and then start qmail it gives the same error.
 >
 > Regards,
 >
 > Amit
 >
 > At Wednesday, 23-06-2010 on 0:56 Eric Shubert wrote:
 >
 > Amit Dalia wrote:
 > > Hi Everyone,
 > >
 > > I'm getting below error when I'm restarting qmail.
 > >
 > > ./run: line 4: /usr/bin/envconv: No such file or directory
 > >
 > >
 > > Qmail is working fine.
 > >
 > > Regards,
 > >
 > > Amit
 >
 > Which run file is it coming from?
 > # find /var/qmail/supervise -name run -exec grep -H envconf {} \;
 >
 > Please post the contents of that file
 > --
 > -Eric 'shubes'
 >

-
Qmailtoaster is sponsored by Vickers Consulting Group
(www.vickersconsulting.com)
Vickers Consulting Group offers Qmailtoaster support and installations.
If you need professional help with your setup, contact them today!

-
Please visit qmailtoaster.com for the latest news, updates, and
packages.

To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

--
-Eric 'shubes'

-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
   Vickers Consulting Group offers Qmailtoaster support and installations.
 If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.

 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com

For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: Error while restarting qmail

2010-06-22 Thread Amit Dalia

Thanks Eric,

That solved the problem.

Regards,

Amit

At Wednesday, 23-06-2010 on 1:19 Eric Shubert wrote:

Oops - I had a typo. It's envconv, not envconf.

That's part of several scripts:
# find /var/qmail/supervise -name run -exec grep -H envconv {} \;
/var/qmail/supervise/pop3-ssl/run:cat /etc/courier/pop3d-ssl | 
/usr/bin/envconv
/var/qmail/supervise/imap4-ssl/run:cat /etc/courier/imapd-ssl | 
/usr/bin/envconv
/var/qmail/supervise/imap4/run:cat /etc/courier/imapd |
/usr/bin/envconv
/var/qmail/supervise/authlib/run:cat
/etc/courier/authlib/authdaemonrc | 
/usr/bin/envconv
# rpm -qf `which envconv`
courier-imap-toaster-4.1.2-1.3.10

You've removed courier I take it. I hope you're running dovecot. ;)

If you're running dovecot for pop3 (as well as imap), I'm guessing
that 
you're getting this from the authlib daemon. As long as you're
running 
dovecot for everything pop3, pop3-ssl, imap4, and imap4-ssl, I don't 
think you need the authlib daemon running. You can either
# touch /var/qmail/supervise/authlib/down
or
# yum remove courier-authlib-toaster

Let us know if that's all right.

-- 
-Eric 'shubes'

Amit Dalia wrote:
> Hi Eric,
> 
> The command you mentioned doesn't give any output. Also I noticed
if I 
> do "qmailctl restart" it doesn't give any error. But if I manually
stop 
> and then start qmail it gives the same error.
> 
> Regards,
> 
> Amit
> 
> At Wednesday, 23-06-2010 on 0:56 Eric Shubert wrote:
> 
> Amit Dalia wrote:
> > Hi Everyone,
> >
> > I'm getting below error when I'm restarting qmail.
> >
> > ./run: line 4: /usr/bin/envconv: No such file or directory
> >
> >
> > Qmail is working fine.
> >
> > Regards,
> >
> > Amit
> 
> Which run file is it coming from?
> # find /var/qmail/supervise -name run -exec grep -H envconf {} \;
> 
> Please post the contents of that file
> -- 
> -Eric 'shubes'
> 

-
Qmailtoaster is sponsored by Vickers Consulting Group
(www.vickersconsulting.com)
Vickers Consulting Group offers Qmailtoaster support and
installations.
If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and
packages.

To unsubscribe, e-mail:
qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail:
qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: Error while restarting qmail

2010-06-22 Thread Eric Shubert

Oops - I had a typo. It's envconv, not envconf.

That's part of several scripts:
# find /var/qmail/supervise -name run -exec grep -H envconv {} \;
/var/qmail/supervise/pop3-ssl/run:cat /etc/courier/pop3d-ssl | 
/usr/bin/envconv
/var/qmail/supervise/imap4-ssl/run:cat /etc/courier/imapd-ssl | 
/usr/bin/envconv

/var/qmail/supervise/imap4/run:cat /etc/courier/imapd | /usr/bin/envconv
/var/qmail/supervise/authlib/run:cat /etc/courier/authlib/authdaemonrc | 
/usr/bin/envconv

# rpm -qf `which envconv`
courier-imap-toaster-4.1.2-1.3.10

You've removed courier I take it. I hope you're running dovecot. ;)

If you're running dovecot for pop3 (as well as imap), I'm guessing that 
you're getting this from the authlib daemon. As long as you're running 
dovecot for everything pop3, pop3-ssl, imap4, and imap4-ssl, I don't 
think you need the authlib daemon running. You can either

# touch /var/qmail/supervise/authlib/down
or
# yum remove courier-authlib-toaster

Let us know if that's all right.

--
-Eric 'shubes'

Amit Dalia wrote:

Hi Eric,

The command you mentioned doesn't give any output. Also I noticed if I 
do "qmailctl restart" it doesn't give any error. But if I manually stop 
and then start qmail it gives the same error.

Regards,

Amit

At Wednesday, 23-06-2010 on 0:56 Eric Shubert wrote:

Amit Dalia wrote:
 > Hi Everyone,
 >
 > I'm getting below error when I'm restarting qmail.
 >
 > ./run: line 4: /usr/bin/envconv: No such file or directory
 >
 >
 > Qmail is working fine.
 >
 > Regards,
 >
 > Amit

Which run file is it coming from?
# find /var/qmail/supervise -name run -exec grep -H envconf {} \;

Please post the contents of that file
-- 
-Eric 'shubes'

-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
   Vickers Consulting Group offers Qmailtoaster support and installations.
 If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.

 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com

For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: Error while restarting qmail

2010-06-22 Thread Amit Dalia

Hi Eric,

When I manually checked run file all supervise folder, I found below
output in authlib folder run file:

#!/bin/sh
rm -rf ./env/*;

cat /etc/courier/authlib/authdaemonrc | /usr/bin/envconv
exec /usr/bin/envdir ./env/ \
/usr/libexec/courier-authlib/authdaemond 2>&1

Is this where error is getting occured?

Regards,

Amit

At Wednesday, 23-06-2010 on 1:10 Amit Dalia wrote:

Hi Eric,

The command you mentioned doesn't give any output. Also I noticed if
I do "qmailctl restart" it doesn't give any error. But if I manually
stop and then start qmail it gives the same error.

Regards,

Amit

At Wednesday, 23-06-2010 on 0:56 Eric Shubert wrote:

Amit Dalia wrote:
> Hi Everyone,
> 
> I'm getting below error when I'm restarting qmail.
> 
> ./run: line 4: /usr/bin/envconv: No such file or directory
> 
> 
> Qmail is working fine.
> 
> Regards,
> 
> Amit

Which run file is it coming from?
# find /var/qmail/supervise -name run -exec grep -H envconf {} \;

Please post the contents of that file
-- 
-Eric 'shubes'

-
Qmailtoaster is sponsored by Vickers Consulting Group
(www.vickersconsulting.com)
Vickers Consulting Group offers Qmailtoaster support and
installations.
If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and
packages.

To unsubscribe, e-mail:
qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail:
qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: Error while restarting qmail

2010-06-22 Thread Amit Dalia

Hi Eric,

The command you mentioned doesn't give any output. Also I noticed if
I do "qmailctl restart" it doesn't give any error. But if I manually
stop and then start qmail it gives the same error.

Regards,

Amit

At Wednesday, 23-06-2010 on 0:56 Eric Shubert wrote:

Amit Dalia wrote:
> Hi Everyone,
> 
> I'm getting below error when I'm restarting qmail.
> 
> ./run: line 4: /usr/bin/envconv: No such file or directory
> 
> 
> Qmail is working fine.
> 
> Regards,
> 
> Amit

Which run file is it coming from?
# find /var/qmail/supervise -name run -exec grep -H envconf {} \;

Please post the contents of that file
-- 
-Eric 'shubes'

-
Qmailtoaster is sponsored by Vickers Consulting Group
(www.vickersconsulting.com)
Vickers Consulting Group offers Qmailtoaster support and
installations.
If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and
packages.

To unsubscribe, e-mail:
qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail:
qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: Error while restarting qmail

2010-06-22 Thread Eric Shubert


Amit Dalia wrote:

Hi Everyone,

I'm getting below error when I'm restarting qmail.

 ./run: line 4: /usr/bin/envconv: No such file or directory


Qmail is working fine.

Regards,

Amit


Which run file is it coming from?
# find /var/qmail/supervise -name run -exec grep -H envconf {} \;

Please post the contents of that file
--
-Eric 'shubes'


-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
   Vickers Consulting Group offers Qmailtoaster support and installations.
 If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.

 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com

For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: Error in Sending Mail

2010-04-28 Thread Amit Dalia

Hi Eric,

There is no other dependency. Also shocking is yum install
perl-XML-SAX doesn't create ParserDetails.ini file. But if manually
install perl-XML-SAX it creates the file. Now I had created
ParserDetails.ini file as mentioned by Anil Aliyan in previous mail
and till now didn't get error.

Regards,

Amit

At Thursday, 29-04-2010 on 0:48 Eric Shubert wrote:

I see. You mentioned that before.

And what requires perl-LDAP? You can do either
# rpm -e perl-LDAP
to chase each dependency, or
# yum remove perl-XML-SAX
will show you the whole dependency tree.

-- 
-Eric 'shubes'

Amit Dalia wrote:
> Hi Eric/ Kent,
> 
> Kent: I had installed this module from RPMforge only.
> 
> Eric: Please find output of command below:
> 
> [r...@mail ~]# rpm -e perl-XML-SAX
> error: Failed dependencies:
> perl(XML::SAX::Base) is needed by (installed)
perl-LDAP-0.33-3.fc6.noarch
> 
> Regards,
> 
> Amit
> 
> At Wednesday, 28-04-2010 on 21:32 Kent Busbee wrote:
> 
> Could this have something to do with RPM not recognizing something
> installed via Perl? Did you use Perl to install something? It may
be
> better to use the RPMforge. I may be way off track
> 
> See response above; Eric Shubert wrote:
> > I don't see any problem with the --lint diag output.
> >
> > I also don't understand how perl-XML-SAX comes into play. What do
you
> > get when you try to remove it?
> > # rpm -e perl-XML-SAX
> > I expect that if it's not there then, as Steve said, some other
XML
> > parser will be used if/when necessary.
> >
> > --
> > -Eric 'shubes'
> >
> > Amit Dalia wrote:
> >> Hi Eric,
> >>
> >> If you see error below
> >>
> >> ould not find ParserDetails.ini in
> >> /usr/lib/perl5/vendor_perl/5.8.8/XML/SAX
> >> ZSorry, I wasn't able to establish an SMTP connection. (#4.4.1)
> >>
> >> I'm unable to understand how perl-XML-SAX is related to SMTP
> connection.
> >> Is this somewhere related to SMARTHOST?
> >>
> >> Regards,
> >>
> >> Amit
> >>
> >> At Wednesday, 28-04-2010 on 10:33 Amit Dalia wrote:
> >>
> >> Hi Eric,
> >>
> >> Please find output of the command you mentioned below:
> >>
> >> [r...@mail ~]# sudo -u vpopmail -H spamassassin -D --lint 2>&1 |
> >> grep "diag:"
> >> [18621] dbg: diag: perl platform: 5.008008 linux
> >> [18621] dbg: diag: module installed: Digest::SHA1, version 2.12
> >> [18621] dbg: diag: module installed: HTML::Parser, version 3.64
> >> [18621] dbg: diag: module installed: Net::DNS, version 0.66
> >> [18621] dbg: diag: module installed: MIME::Base64, version 3.07
> >> [18621] dbg: diag: module installed: DB_File, version 1.814
> >> [18621] dbg: diag: module installed: Net::SMTP, version 2.31
> >> [18621] dbg: diag: module installed: Mail::SPF, version v2.006
> >> [18621] dbg: diag: module installed: Mail::SPF::Query, version
> >> 1.999001
> >> [18621] dbg: diag: module installed: IP::Country::Fast, version
> >> 604.001
> >> [18621] dbg: diag: module installed: Razor2::Client::Agent,
version
> >> 2.84
> >> [18621] dbg: diag: module installed: Net::Ident, version 1.20
> >> [18621] dbg: diag: module installed: IO::Socket::INET6, version
2.57
> >> [18621] dbg: diag: module installed: IO::Socket::SSL, version
1.31
> >> [18621] dbg: diag: module installed: Compress::Zlib, version
2.024
> >> [18621] dbg: diag: module installed: Time::HiRes, version 1.9717
> >> [18621] dbg: diag: module installed: Mail::DomainKeys, version
1.0
> >> [18621] dbg: diag: module installed: Mail::DKIM, version 0.37
> >> [18621] dbg: diag: module installed: DBI, version 1.609
> >> [18621] dbg: diag: module installed: Getopt::Long, version 2.35
> >> [18621] dbg: diag: module installed: LWP::UserAgent, version
2.033
> >> [18621] dbg: diag: module installed: HTTP::Date, version 1.47
> >> [18621] dbg: diag: module installed: Archive::Tar, version 1.56
> >> [18621] dbg: diag: module installed: IO::Zlib, version 1.10
> >> [18621] dbg: diag: module installed: Encode::Detect, version
1.01
> >>
> >> Regards,
> >>
> >> Amit
> >>
> >> At Wednesday, 28-04-2010 on 10:03 Eric Shubert wrote:
> >>
> >> Hey Amit,
> >>
> >> I'm particularly interested in the --lint output which lists
> >> diag:, so I
> >> guess you could do:
> >> # sudo -u vpopmail -H spamassassin -D --lint 2>&1 | grep "diag:"
> >> That will show if modules that are used, and if any are missing.
> >> From what Steve said though, I'm not sure it will show what all
> >> is
> >> missing with XML/SAX.
> >>
> >> The stock QMT does not use LDAP of any kind (that I'm aware of,
> >> and I'm
> >> pretty sure about that). FWIW, I hope to introduce an LDAP
> >> option (in
> >> place of MySQL) once vpopmail 5.5 is fully available. I don't
> >> know of an
> >> estimated target date for that, but I expect it will be at least
> >> several
> >> months from now. I'll be happy if we see it by the end of this
> >> year.
> >>
> >> --
> >> -Eric 'shubes'
> >>
> >> Amit Dalia wrote:
> >> > Dear Eric/Steve,
> >> >
> >> > Sorry I agree I should google first.
> >> >
> >> > Eric: Please find output of command "sudo -u v

[qmailtoaster] Re: Error in Sending Mail

2010-04-28 Thread Eric Shubert


I see. You mentioned that before.

And what requires perl-LDAP? You can do either
# rpm -e perl-LDAP
to chase each dependency, or
# yum remove perl-XML-SAX
will show you the whole dependency tree.

--
-Eric 'shubes'

Amit Dalia wrote:

Hi Eric/ Kent,

Kent: I had installed this module from RPMforge only.

Eric: Please find output of command below:

[r...@mail ~]# rpm -e perl-XML-SAX
error: Failed dependencies:
perl(XML::SAX::Base) is needed by (installed) perl-LDAP-0.33-3.fc6.noarch

Regards,

Amit

At Wednesday, 28-04-2010 on 21:32 Kent Busbee wrote:

Could this have something to do with RPM not recognizing something
installed via Perl? Did you use Perl to install something? It may be
better to use the RPMforge. I may be way off track

See response above; Eric Shubert wrote:
 > I don't see any problem with the --lint diag output.
 >
 > I also don't understand how perl-XML-SAX comes into play. What do you
 > get when you try to remove it?
 > # rpm -e perl-XML-SAX
 > I expect that if it's not there then, as Steve said, some other XML
 > parser will be used if/when necessary.
 >
 > --
 > -Eric 'shubes'
 >
 > Amit Dalia wrote:
 >> Hi Eric,
 >>
 >> If you see error below
 >>
 >> ould not find ParserDetails.ini in
 >> /usr/lib/perl5/vendor_perl/5.8.8/XML/SAX
 >> ZSorry, I wasn't able to establish an SMTP connection. (#4.4.1)
 >>
 >> I'm unable to understand how perl-XML-SAX is related to SMTP
connection.
 >> Is this somewhere related to SMARTHOST?
 >>
 >> Regards,
 >>
 >> Amit
 >>
 >> At Wednesday, 28-04-2010 on 10:33 Amit Dalia wrote:
 >>
 >> Hi Eric,
 >>
 >> Please find output of the command you mentioned below:
 >>
 >> [r...@mail ~]# sudo -u vpopmail -H spamassassin -D --lint 2>&1 |
 >> grep "diag:"
 >> [18621] dbg: diag: perl platform: 5.008008 linux
 >> [18621] dbg: diag: module installed: Digest::SHA1, version 2.12
 >> [18621] dbg: diag: module installed: HTML::Parser, version 3.64
 >> [18621] dbg: diag: module installed: Net::DNS, version 0.66
 >> [18621] dbg: diag: module installed: MIME::Base64, version 3.07
 >> [18621] dbg: diag: module installed: DB_File, version 1.814
 >> [18621] dbg: diag: module installed: Net::SMTP, version 2.31
 >> [18621] dbg: diag: module installed: Mail::SPF, version v2.006
 >> [18621] dbg: diag: module installed: Mail::SPF::Query, version
 >> 1.999001
 >> [18621] dbg: diag: module installed: IP::Country::Fast, version
 >> 604.001
 >> [18621] dbg: diag: module installed: Razor2::Client::Agent, version
 >> 2.84
 >> [18621] dbg: diag: module installed: Net::Ident, version 1.20
 >> [18621] dbg: diag: module installed: IO::Socket::INET6, version 2.57
 >> [18621] dbg: diag: module installed: IO::Socket::SSL, version 1.31
 >> [18621] dbg: diag: module installed: Compress::Zlib, version 2.024
 >> [18621] dbg: diag: module installed: Time::HiRes, version 1.9717
 >> [18621] dbg: diag: module installed: Mail::DomainKeys, version 1.0
 >> [18621] dbg: diag: module installed: Mail::DKIM, version 0.37
 >> [18621] dbg: diag: module installed: DBI, version 1.609
 >> [18621] dbg: diag: module installed: Getopt::Long, version 2.35
 >> [18621] dbg: diag: module installed: LWP::UserAgent, version 2.033
 >> [18621] dbg: diag: module installed: HTTP::Date, version 1.47
 >> [18621] dbg: diag: module installed: Archive::Tar, version 1.56
 >> [18621] dbg: diag: module installed: IO::Zlib, version 1.10
 >> [18621] dbg: diag: module installed: Encode::Detect, version 1.01
 >>
 >> Regards,
 >>
 >> Amit
 >>
 >> At Wednesday, 28-04-2010 on 10:03 Eric Shubert wrote:
 >>
 >> Hey Amit,
 >>
 >> I'm particularly interested in the --lint output which lists
 >> diag:, so I
 >> guess you could do:
 >> # sudo -u vpopmail -H spamassassin -D --lint 2>&1 | grep "diag:"
 >> That will show if modules that are used, and if any are missing.
 >> From what Steve said though, I'm not sure it will show what all
 >> is
 >> missing with XML/SAX.
 >>
 >> The stock QMT does not use LDAP of any kind (that I'm aware of,
 >> and I'm
 >> pretty sure about that). FWIW, I hope to introduce an LDAP
 >> option (in
 >> place of MySQL) once vpopmail 5.5 is fully available. I don't
 >> know of an
 >> estimated target date for that, but I expect it will be at least
 >> several
 >> months from now. I'll be happy if we see it by the end of this
 >> year.
 >>
 >> --
 >> -Eric 'shubes'
 >>
 >> Amit Dalia wrote:
 >> > Dear Eric/Steve,
 >> >
 >> > Sorry I agree I should google first.
 >> >
 >> > Eric: Please find output of command "sudo -u vpopmail -H
 >> spamassassin -D
 >> > --lint" below:
 >> >
 >> > [14326

Re: [qmailtoaster] Re: Error in Sending Mail

2010-04-28 Thread Amit Dalia

Hi Eric/ Kent,

Kent: I had installed this module from RPMforge only.

Eric: Please find output of command below:

[r...@mail ~]# rpm -e perl-XML-SAX
error: Failed dependencies:
perl(XML::SAX::Base) is needed by (installed)
perl-LDAP-0.33-3.fc6.noarch

Regards,

Amit

At Wednesday, 28-04-2010 on 21:32 Kent Busbee wrote:

Could this have something to do with RPM not recognizing something
installed via Perl? Did you use Perl to install something? It may be
better to use the RPMforge. I may be way off track

See response above; Eric Shubert wrote:
> I don't see any problem with the --lint diag output.
>
> I also don't understand how perl-XML-SAX comes into play. What do
you
> get when you try to remove it?
> # rpm -e perl-XML-SAX
> I expect that if it's not there then, as Steve said, some other XML
> parser will be used if/when necessary.
>
> --
> -Eric 'shubes'
>
> Amit Dalia wrote:
>> Hi Eric,
>>
>> If you see error below
>>
>> ould not find ParserDetails.ini in
>> /usr/lib/perl5/vendor_perl/5.8.8/XML/SAX
>> ZSorry, I wasn't able to establish an SMTP connection. (#4.4.1)
>>
>> I'm unable to understand how perl-XML-SAX is related to SMTP
connection.
>> Is this somewhere related to SMARTHOST?
>>
>> Regards,
>>
>> Amit
>>
>> At Wednesday, 28-04-2010 on 10:33 Amit Dalia wrote:
>>
>> Hi Eric,
>>
>> Please find output of the command you mentioned below:
>>
>> [r...@mail ~]# sudo -u vpopmail -H spamassassin -D --lint 2>&1 |
>> grep "diag:"
>> [18621] dbg: diag: perl platform: 5.008008 linux
>> [18621] dbg: diag: module installed: Digest::SHA1, version 2.12
>> [18621] dbg: diag: module installed: HTML::Parser, version 3.64
>> [18621] dbg: diag: module installed: Net::DNS, version 0.66
>> [18621] dbg: diag: module installed: MIME::Base64, version 3.07
>> [18621] dbg: diag: module installed: DB_File, version 1.814
>> [18621] dbg: diag: module installed: Net::SMTP, version 2.31
>> [18621] dbg: diag: module installed: Mail::SPF, version v2.006
>> [18621] dbg: diag: module installed: Mail::SPF::Query, version
>> 1.999001
>> [18621] dbg: diag: module installed: IP::Country::Fast, version
>> 604.001
>> [18621] dbg: diag: module installed: Razor2::Client::Agent,
version
>> 2.84
>> [18621] dbg: diag: module installed: Net::Ident, version 1.20
>> [18621] dbg: diag: module installed: IO::Socket::INET6, version
2.57
>> [18621] dbg: diag: module installed: IO::Socket::SSL, version 1.31
>> [18621] dbg: diag: module installed: Compress::Zlib, version 2.024
>> [18621] dbg: diag: module installed: Time::HiRes, version 1.9717
>> [18621] dbg: diag: module installed: Mail::DomainKeys, version 1.0
>> [18621] dbg: diag: module installed: Mail::DKIM, version 0.37
>> [18621] dbg: diag: module installed: DBI, version 1.609
>> [18621] dbg: diag: module installed: Getopt::Long, version 2.35
>> [18621] dbg: diag: module installed: LWP::UserAgent, version 2.033
>> [18621] dbg: diag: module installed: HTTP::Date, version 1.47
>> [18621] dbg: diag: module installed: Archive::Tar, version 1.56
>> [18621] dbg: diag: module installed: IO::Zlib, version 1.10
>> [18621] dbg: diag: module installed: Encode::Detect, version 1.01
>>
>> Regards,
>>
>> Amit
>>
>> At Wednesday, 28-04-2010 on 10:03 Eric Shubert wrote:
>>
>> Hey Amit,
>>
>> I'm particularly interested in the --lint output which lists
>> diag:, so I
>> guess you could do:
>> # sudo -u vpopmail -H spamassassin -D --lint 2>&1 | grep "diag:"
>> That will show if modules that are used, and if any are missing.
>> From what Steve said though, I'm not sure it will show what all
>> is
>> missing with XML/SAX.
>>
>> The stock QMT does not use LDAP of any kind (that I'm aware of,
>> and I'm
>> pretty sure about that). FWIW, I hope to introduce an LDAP
>> option (in
>> place of MySQL) once vpopmail 5.5 is fully available. I don't
>> know of an
>> estimated target date for that, but I expect it will be at least
>> several
>> months from now. I'll be happy if we see it by the end of this
>> year.
>>
>> --
>> -Eric 'shubes'
>>
>> Amit Dalia wrote:
>> > Dear Eric/Steve,
>> >
>> > Sorry I agree I should google first.
>> >
>> > Eric: Please find output of command "sudo -u vpopmail -H
>> spamassassin -D
>> > --lint" below:
>> >
>> > [14326] dbg: rules: compiled meta tests
>> > [14326] dbg: check: running tests for priority: 1000
>> > [14326] dbg: rules: running head tests; score so far=4.205
>> > [14326] dbg: rules: compiled head tests
>> > [14326] dbg: rules: running body tests; score so far=4.205
>> > [14326] dbg: rules: compiled body tests
>> > [14326] dbg: rules: running uri tests; score so far=4.205
>> > [14326] dbg: rules: compiled uri tests
>> > [14326] dbg: rules: running rawbody tests; score so far=4.205
>> > [14326] dbg: rules: compiled rawbody tests
>> > [14326] dbg: rules: running full tests; score so far=4.205
>> > [14326] dbg: rules: compiled full tests
>> > [14326] dbg: rules: running meta tests; score so far=4.205
>> > [14326] dbg: rules: compiled meta tests
>> > [14326] dbg: check: is spam

Re: [qmailtoaster] Re: Error in Sending Mail

2010-04-28 Thread Kent Busbee

Could this have something to do with RPM not recognizing something
installed via Perl?  Did you use Perl to install something?  It may be
better to use the RPMforge. I may be way off track

See response above; Eric Shubert wrote:
> I don't see any problem with the --lint diag output.
>
> I also don't understand how perl-XML-SAX comes into play. What do you
> get when you try to remove it?
> # rpm -e perl-XML-SAX
> I expect that if it's not there then, as Steve said, some other XML
> parser will be used if/when necessary.
>
> --
> -Eric 'shubes'
>
> Amit Dalia wrote:
>> Hi Eric,
>>
>> If you see error below
>>
>> ould not find ParserDetails.ini in
>> /usr/lib/perl5/vendor_perl/5.8.8/XML/SAX
>> ZSorry, I wasn't able to establish an SMTP connection. (#4.4.1)
>>
>> I'm unable to understand how perl-XML-SAX is related to SMTP connection.
>> Is this somewhere related to SMARTHOST?
>>
>> Regards,
>>
>> Amit
>>
>> At Wednesday, 28-04-2010 on 10:33 Amit Dalia wrote:
>>
>> Hi Eric,
>>
>> Please find output of the command you mentioned below:
>>
>> [r...@mail ~]# sudo -u vpopmail -H spamassassin -D --lint 2>&1 |
>> grep "diag:"
>> [18621] dbg: diag: perl platform: 5.008008 linux
>> [18621] dbg: diag: module installed: Digest::SHA1, version 2.12
>> [18621] dbg: diag: module installed: HTML::Parser, version 3.64
>> [18621] dbg: diag: module installed: Net::DNS, version 0.66
>> [18621] dbg: diag: module installed: MIME::Base64, version 3.07
>> [18621] dbg: diag: module installed: DB_File, version 1.814
>> [18621] dbg: diag: module installed: Net::SMTP, version 2.31
>> [18621] dbg: diag: module installed: Mail::SPF, version v2.006
>> [18621] dbg: diag: module installed: Mail::SPF::Query, version
>> 1.999001
>> [18621] dbg: diag: module installed: IP::Country::Fast, version
>> 604.001
>> [18621] dbg: diag: module installed: Razor2::Client::Agent, version
>> 2.84
>> [18621] dbg: diag: module installed: Net::Ident, version 1.20
>> [18621] dbg: diag: module installed: IO::Socket::INET6, version 2.57
>> [18621] dbg: diag: module installed: IO::Socket::SSL, version 1.31
>> [18621] dbg: diag: module installed: Compress::Zlib, version 2.024
>> [18621] dbg: diag: module installed: Time::HiRes, version 1.9717
>> [18621] dbg: diag: module installed: Mail::DomainKeys, version 1.0
>> [18621] dbg: diag: module installed: Mail::DKIM, version 0.37
>> [18621] dbg: diag: module installed: DBI, version 1.609
>> [18621] dbg: diag: module installed: Getopt::Long, version 2.35
>> [18621] dbg: diag: module installed: LWP::UserAgent, version 2.033
>> [18621] dbg: diag: module installed: HTTP::Date, version 1.47
>> [18621] dbg: diag: module installed: Archive::Tar, version 1.56
>> [18621] dbg: diag: module installed: IO::Zlib, version 1.10
>> [18621] dbg: diag: module installed: Encode::Detect, version 1.01
>>
>> Regards,
>>
>> Amit
>>
>> At Wednesday, 28-04-2010 on 10:03 Eric Shubert wrote:
>>
>> Hey Amit,
>>
>> I'm particularly interested in the --lint output which lists
>> diag:, so I
>> guess you could do:
>> # sudo -u vpopmail -H spamassassin -D --lint 2>&1 | grep "diag:"
>> That will show if modules that are used, and if any are missing.
>>  From what Steve said though, I'm not sure it will show what all
>> is
>> missing with XML/SAX.
>>
>> The stock QMT does not use LDAP of any kind (that I'm aware of,
>> and I'm
>> pretty sure about that). FWIW, I hope to introduce an LDAP
>> option (in
>> place of MySQL) once vpopmail 5.5 is fully available. I don't
>> know of an
>> estimated target date for that, but I expect it will be at least
>> several
>> months from now. I'll be happy if we see it by the end of this
>> year.
>>
>> --
>> -Eric 'shubes'
>>
>> Amit Dalia wrote:
>>  > Dear Eric/Steve,
>>  >
>>  > Sorry I agree I should google first.
>>  >
>>  > Eric: Please find output of command "sudo -u vpopmail -H
>> spamassassin -D
>>  > --lint" below:
>>  >
>>  > [14326] dbg: rules: compiled meta tests
>>  > [14326] dbg: check: running tests for priority: 1000
>>  > [14326] dbg: rules: running head tests; score so far=4.205
>>  > [14326] dbg: rules: compiled head tests
>>  > [14326] dbg: rules: running body tests; score so far=4.205
>>  > [14326] dbg: rules: compiled body tests
>>  > [14326] dbg: rules: running uri tests; score so far=4.205
>>  > [14326] dbg: rules: compiled uri tests
>>  > [14326] dbg: rules: running rawbody tests; score so far=4.205
>>  > [14326] dbg: rules: compiled rawbody tests
>>  > [14326] dbg: rules: running full tests; score so far=4.205
>>  > [14326] dbg: rules: compiled full

[qmailtoaster] Re: Error in Sending Mail

2010-04-28 Thread Eric Shubert

I don't see any problem with the --lint diag output.

I also don't understand how perl-XML-SAX comes into play. What do you 
get when you try to remove it?

# rpm -e perl-XML-SAX
I expect that if it's not there then, as Steve said, some other XML 
parser will be used if/when necessary.

--
-Eric 'shubes'

Amit Dalia wrote:

Hi Eric,

If you see error below

ould not find ParserDetails.ini in /usr/lib/perl5/vendor_perl/5.8.8/XML/SAX
ZSorry, I wasn't able to establish an SMTP connection. (#4.4.1)

I'm unable to understand how perl-XML-SAX is related to SMTP connection. 
Is this somewhere related to SMARTHOST?

Regards,

Amit

At Wednesday, 28-04-2010 on 10:33 Amit Dalia wrote:

Hi Eric,

Please find output of the command you mentioned below:

[r...@mail ~]# sudo -u vpopmail -H spamassassin -D --lint 2>&1 |
grep "diag:"
[18621] dbg: diag: perl platform: 5.008008 linux
[18621] dbg: diag: module installed: Digest::SHA1, version 2.12
[18621] dbg: diag: module installed: HTML::Parser, version 3.64
[18621] dbg: diag: module installed: Net::DNS, version 0.66
[18621] dbg: diag: module installed: MIME::Base64, version 3.07
[18621] dbg: diag: module installed: DB_File, version 1.814
[18621] dbg: diag: module installed: Net::SMTP, version 2.31
[18621] dbg: diag: module installed: Mail::SPF, version v2.006
[18621] dbg: diag: module installed: Mail::SPF::Query, version 1.999001
[18621] dbg: diag: module installed: IP::Country::Fast, version 604.001
[18621] dbg: diag: module installed: Razor2::Client::Agent, version 2.84
[18621] dbg: diag: module installed: Net::Ident, version 1.20
[18621] dbg: diag: module installed: IO::Socket::INET6, version 2.57
[18621] dbg: diag: module installed: IO::Socket::SSL, version 1.31
[18621] dbg: diag: module installed: Compress::Zlib, version 2.024
[18621] dbg: diag: module installed: Time::HiRes, version 1.9717
[18621] dbg: diag: module installed: Mail::DomainKeys, version 1.0
[18621] dbg: diag: module installed: Mail::DKIM, version 0.37
[18621] dbg: diag: module installed: DBI, version 1.609
[18621] dbg: diag: module installed: Getopt::Long, version 2.35
[18621] dbg: diag: module installed: LWP::UserAgent, version 2.033
[18621] dbg: diag: module installed: HTTP::Date, version 1.47
[18621] dbg: diag: module installed: Archive::Tar, version 1.56
[18621] dbg: diag: module installed: IO::Zlib, version 1.10
[18621] dbg: diag: module installed: Encode::Detect, version 1.01

Regards,

Amit

At Wednesday, 28-04-2010 on 10:03 Eric Shubert wrote:

Hey Amit,

I'm particularly interested in the --lint output which lists
diag:, so I
guess you could do:
# sudo -u vpopmail -H spamassassin -D --lint 2>&1 | grep "diag:"
That will show if modules that are used, and if any are missing.
 From what Steve said though, I'm not sure it will show what all is
missing with XML/SAX.

The stock QMT does not use LDAP of any kind (that I'm aware of,
and I'm
pretty sure about that). FWIW, I hope to introduce an LDAP
option (in
place of MySQL) once vpopmail 5.5 is fully available. I don't
know of an
estimated target date for that, but I expect it will be at least
several
months from now. I'll be happy if we see it by the end of this year.

-- 
-Eric 'shubes'

Amit Dalia wrote:
 > Dear Eric/Steve,
 >
 > Sorry I agree I should google first.
 >
 > Eric: Please find output of command "sudo -u vpopmail -H
spamassassin -D
 > --lint" below:
 >
 > [14326] dbg: rules: compiled meta tests
 > [14326] dbg: check: running tests for priority: 1000
 > [14326] dbg: rules: running head tests; score so far=4.205
 > [14326] dbg: rules: compiled head tests
 > [14326] dbg: rules: running body tests; score so far=4.205
 > [14326] dbg: rules: compiled body tests
 > [14326] dbg: rules: running uri tests; score so far=4.205
 > [14326] dbg: rules: compiled uri tests
 > [14326] dbg: rules: running rawbody tests; score so far=4.205
 > [14326] dbg: rules: compiled rawbody tests
 > [14326] dbg: rules: running full tests; score so far=4.205
 > [14326] dbg: rules: compiled full tests
 > [14326] dbg: rules: running meta tests; score so far=4.205
 > [14326] dbg: rules: compiled meta tests
 > [14326] dbg: check: is spam? score=4.205 required=5
 > [14326] dbg: check:
 >
tests=MISSING_DATE,MISSING_HEADERS,MISSING_SUBJECT,NO_RECEIVED,NO_RELAYS
 > [14326] dbg: check:
 >

subtests=__HAS_MSGID,__MISSING_REF,__MSGID_OK_DIGITS,__MSGID_OK_HOST,__MSOE_MID_WRONG_CASE,__NONEMPTY_BODY,__SANE_MSGID,__SARE_WHITELIST_FLAG,__TVD_BODY,__UNUSABLE_MSGID

RE: [qmailtoaster] Re: Error in Sending Mail -- ParserDetails ini not found error

2010-04-27 Thread Amit Dalia

Hi Anil,

Thanks. I had checked the folder and there was no ParserDetails.ini
file. I had installed this module using RPM file.

Any way I had manually created file now.

Thanks and regards,

Amit

At Wednesday, 28-04-2010 on 11:03 Anil Aliyan wrote:

http://perl-xml.sourceforge.net/faq/#parserdetails.ini

3.18. "could not find ParserDetails.ini" 

 A number of people have reported encountering the error "could not
find ParserDetails.ini in ..." when installing or attempting to use
XML::SAX. ParserDetails.ini is used by XML::SAX::ParserFactory to
determine which SAX parser modules are installed. It should be created
by the XML::SAX installation script and should be updated
automatically by the install script for each SAX parser module.

If you are installing XML::SAX manually you must run Makefile.PL.
Unpacking the tarball and copying the files into your Perl lib
directory will not work.

During the initial installation, if you are asked whether
ParserDetails.ini should be updated, always say yes. If you say no,
the file will not be created.

If you are using ActivePerl, the following command should resolve the
problem: 

ppm install http://theoryx5.uwinnipeg.ca/ppms/XML-SAX.ppd

Once you have successfully installed XML::SAX, you should consider
installing a module such as XML::SAX::Expat or XML::LibXML to replace
the slower pure-Perl parser bundled with SAX.

If you are packaging XML::SAX in an alternative distribution format
(such as RPM), your post-install script should check if
ParserDetails.ini exists and if it doesn't, run this command:

perl -MXML::SAX -e
"XML::SAX->add_parser(q(XML::SAX::PurePerl))->save_parsers()"

Don't unconditionally run this command, or users who re-install
XML::SAX may find that any fast SAX parser they have installed will be
replaced as the default by the pure-Perl parser.

I hope this will help many of us who are facing this problem.

Regards,

Anil Aliyan

-Original Message-
From: Eric Shubert [mailto:e...@shubes.net] 
Sent: Wednesday, April 28, 2010 10:03 AM
To: qmailtoaster-list@qmailtoaster.com
Subject: [qmailtoaster] Re: Error in Sending Mail

Hey Amit,

I'm particularly interested in the --lint output which lists diag:,
so I 

guess you could do:

# sudo -u vpopmail -H spamassassin -D --lint 2>&1 | grep "diag:"

That will show if modules that are used, and if any are missing.

 From what Steve said though, I'm not sure it will show what all is 

missing with XML/SAX.

The stock QMT does not use LDAP of any kind (that I'm aware of, and
I'm 

pretty sure about that). FWIW, I hope to introduce an LDAP option (in

place of MySQL) once vpopmail 5.5 is fully available. I don't know of
an 

estimated target date for that, but I expect it will be at least
several 

months from now. I'll be happy if we see it by the end of this year.

-- 

-Eric 'shubes'

Amit Dalia wrote:

> Dear Eric/Steve,

> 

> Sorry I agree I should google first.

> 

> Eric: Please find output of command "sudo -u vpopmail -H
spamassassin -D 

> --lint" below:

> 

> [14326] dbg: rules: compiled meta tests

> [14326] dbg: check: running tests for priority: 1000

> [14326] dbg: rules: running head tests; score so far=4.205

> [14326] dbg: rules: compiled head tests

> [14326] dbg: rules: running body tests; score so far=4.205

> [14326] dbg: rules: compiled body tests

> [14326] dbg: rules: running uri tests; score so far=4.205

> [14326] dbg: rules: compiled uri tests

> [14326] dbg: rules: running rawbody tests; score so far=4.205

> [14326] dbg: rules: compiled rawbody tests

> [14326] dbg: rules: running full tests; score so far=4.205

> [14326] dbg: rules: compiled full tests

> [14326] dbg: rules: running meta tests; score so far=4.205

> [14326] dbg: rules: compiled meta tests

> [14326] dbg: check: is spam? score=4.205 required=5

> [14326] dbg: check: 

>
tests=MISSING_DATE,MISSING_HEADERS,MISSING_SUBJECT,NO_RECEIVED,NO_RELAYS

> [14326] dbg: check: 

>
subtests=__HAS_MSGID,__MISSING_REF,__MSGID_OK_DIGITS,__MSGID_OK_HOST,__MSOE_MID_WRONG_CASE,__NONEMPTY_BODY,__SANE_MSGID,__SARE_WHITELIST_FLAG,__TVD_BODY,__UNUSABLE_MSGID

> 

> There was lot more but I thought to post last few line, if require
will 

> post complete output.

> 

> Also I found that perl-LDAP module depands on perl-XML-SAX. Does
QMT 

> perl-LDAP module(I don't think so)?

> 

> Regards,

> 

> Amit

> 

> At Wednesday, 28-04-2010 on 0:21 Eric Shubert wrote:

> 

> Steve Huff wrote:

>  > On Apr 27, 2010, at 2:18 PM, Eric Shubert wrote:

>  >

>  >> Perhaps there's another XML parser that is used if
XML::SAX

> doesn't exist? I can only speculate. I expect that t

RE: [qmailtoaster] Re: Error in Sending Mail -- ParserDetails ini not found error

2010-04-27 Thread Anil Aliyan

http://perl-xml.sourceforge.net/faq/#parserdetails.ini

3.18. "could not find ParserDetails.ini" 

 A number of people have reported encountering the error "could not find
ParserDetails.ini in ..." when installing or attempting to use XML::SAX.
ParserDetails.ini is used by XML::SAX::ParserFactory to determine which SAX
parser modules are installed. It should be created by the XML::SAX
installation script and should be updated automatically by the install
script for each SAX parser module.

If you are installing XML::SAX manually you must run Makefile.PL. Unpacking
the tarball and copying the files into your Perl lib directory will not
work.

During the initial installation, if you are asked whether ParserDetails.ini
should be updated, always say yes. If you say no, the file will not be
created.

If you are using ActivePerl, the following command should resolve the
problem: 

ppm install http://theoryx5.uwinnipeg.ca/ppms/XML-SAX.ppd

Once you have successfully installed XML::SAX, you should consider
installing a module such as XML::SAX::Expat or XML::LibXML to replace the
slower pure-Perl parser bundled with SAX.

If you are packaging XML::SAX in an alternative distribution format (such as
RPM), your post-install script should check if ParserDetails.ini exists and
if it doesn't, run this command:

perl -MXML::SAX -e
"XML::SAX->add_parser(q(XML::SAX::PurePerl))->save_parsers()"

Don't unconditionally run this command, or users who re-install XML::SAX may
find that any fast SAX parser they have installed will be replaced as the
default by the pure-Perl parser.

I hope this will help many of us who are facing this problem.

Regards,

Anil Aliyan

-Original Message-
From: Eric Shubert [mailto:e...@shubes.net] 
Sent: Wednesday, April 28, 2010 10:03 AM
To: qmailtoaster-list@qmailtoaster.com
Subject: [qmailtoaster] Re: Error in Sending Mail

Hey Amit,

I'm particularly interested in the --lint output which lists diag:, so I 

guess you could do:

# sudo -u vpopmail -H spamassassin -D --lint 2>&1 | grep "diag:"

That will show if modules that are used, and if any are missing.

 From what Steve said though, I'm not sure it will show what all is 

missing with XML/SAX.

The stock QMT does not use LDAP of any kind (that I'm aware of, and I'm 

pretty sure about that). FWIW, I hope to introduce an LDAP option (in 

place of MySQL) once vpopmail 5.5 is fully available. I don't know of an 

estimated target date for that, but I expect it will be at least several 

months from now. I'll be happy if we see it by the end of this year.

-- 

-Eric 'shubes'

Amit Dalia wrote:

> Dear Eric/Steve,

> 

> Sorry I agree I should google first.

> 

> Eric: Please find output of command "sudo -u vpopmail -H spamassassin -D 

> --lint" below:

> 

> [14326] dbg: rules: compiled meta tests

> [14326] dbg: check: running tests for priority: 1000

> [14326] dbg: rules: running head tests; score so far=4.205

> [14326] dbg: rules: compiled head tests

> [14326] dbg: rules: running body tests; score so far=4.205

> [14326] dbg: rules: compiled body tests

> [14326] dbg: rules: running uri tests; score so far=4.205

> [14326] dbg: rules: compiled uri tests

> [14326] dbg: rules: running rawbody tests; score so far=4.205

> [14326] dbg: rules: compiled rawbody tests

> [14326] dbg: rules: running full tests; score so far=4.205

> [14326] dbg: rules: compiled full tests

> [14326] dbg: rules: running meta tests; score so far=4.205

> [14326] dbg: rules: compiled meta tests

> [14326] dbg: check: is spam? score=4.205 required=5

> [14326] dbg: check: 

> tests=MISSING_DATE,MISSING_HEADERS,MISSING_SUBJECT,NO_RECEIVED,NO_RELAYS

> [14326] dbg: check: 

>
subtests=__HAS_MSGID,__MISSING_REF,__MSGID_OK_DIGITS,__MSGID_OK_HOST,__MSOE_
MID_WRONG_CASE,__NONEMPTY_BODY,__SANE_MSGID,__SARE_WHITELIST_FLAG,__TVD_BODY
,__UNUSABLE_MSGID

> 

> There was lot more but I thought to post last few line, if require will 

> post complete output.

> 

> Also I found that perl-LDAP module depands on perl-XML-SAX. Does QMT 

> perl-LDAP module(I don't think so)?

> 

> Regards,

> 

> Amit

> 

> At Wednesday, 28-04-2010 on 0:21 Eric Shubert wrote:

> 

> Steve Huff wrote:

>  > On Apr 27, 2010, at 2:18 PM, Eric Shubert wrote:

>  >

>  >> Perhaps there's another XML parser that is used if XML::SAX

> doesn't exist? I can only speculate. I expect that there are others

> on the list that know better than I do about this.

>  >

>  >

>  > it's the other way around; that error message indicates that

> XML::SAX is falling back to its built-in pure-P

RE: [qmailtoaster] Re: Error in Sending Mail

2010-04-27 Thread Anil Aliyan

Hi Amit/Eric

This is true that the spamassassin uses perl but why It needs ParserDetails.ini 
is not known, may just to make sure that all XML Parser modules are install and 
upto-date. When we do rpm install of XML-SAX this ParserDetails.ini file 
doesn’t gets created as it requires manual compilation and installation of the 
SAX and XML Parser modules, that’s what I have read few days back when I was 
updating my server and I faced the similar problem with qmail send. So I simply 
downloaded an ParserDetails.ini and placed in the perl SAX folder and every 
thing works fine now. Please find the ParserDetails.ini file attached with this 
mail.

Place it in the /usr/lib/perl5/vendor_perl/5.8.8/XML/SAX
And everything should work now.

Regards,

Anil Aliyan

-Original Message-
From: Eric Shubert [mailto:e...@shubes.net] 
Sent: Wednesday, April 28, 2010 10:03 AM
To: qmailtoaster-list@qmailtoaster.com
Subject: [qmailtoaster] Re: Error in Sending Mail

Hey Amit,

I'm particularly interested in the --lint output which lists diag:, so I 
guess you could do:
# sudo -u vpopmail -H spamassassin -D --lint 2>&1 | grep "diag:"
That will show if modules that are used, and if any are missing.
 From what Steve said though, I'm not sure it will show what all is 
missing with XML/SAX.

The stock QMT does not use LDAP of any kind (that I'm aware of, and I'm 
pretty sure about that). FWIW, I hope to introduce an LDAP option (in 
place of MySQL) once vpopmail 5.5 is fully available. I don't know of an 
estimated target date for that, but I expect it will be at least several 
months from now. I'll be happy if we see it by the end of this year.

-- 
-Eric 'shubes'

Amit Dalia wrote:
> Dear Eric/Steve,
> 
> Sorry I agree I should google first.
> 
> Eric: Please find output of command "sudo -u vpopmail -H spamassassin -D 
> --lint" below:
> 
> [14326] dbg: rules: compiled meta tests
> [14326] dbg: check: running tests for priority: 1000
> [14326] dbg: rules: running head tests; score so far=4.205
> [14326] dbg: rules: compiled head tests
> [14326] dbg: rules: running body tests; score so far=4.205
> [14326] dbg: rules: compiled body tests
> [14326] dbg: rules: running uri tests; score so far=4.205
> [14326] dbg: rules: compiled uri tests
> [14326] dbg: rules: running rawbody tests; score so far=4.205
> [14326] dbg: rules: compiled rawbody tests
> [14326] dbg: rules: running full tests; score so far=4.205
> [14326] dbg: rules: compiled full tests
> [14326] dbg: rules: running meta tests; score so far=4.205
> [14326] dbg: rules: compiled meta tests
> [14326] dbg: check: is spam? score=4.205 required=5
> [14326] dbg: check: 
> tests=MISSING_DATE,MISSING_HEADERS,MISSING_SUBJECT,NO_RECEIVED,NO_RELAYS
> [14326] dbg: check: 
> subtests=__HAS_MSGID,__MISSING_REF,__MSGID_OK_DIGITS,__MSGID_OK_HOST,__MSOE_MID_WRONG_CASE,__NONEMPTY_BODY,__SANE_MSGID,__SARE_WHITELIST_FLAG,__TVD_BODY,__UNUSABLE_MSGID
> 
> There was lot more but I thought to post last few line, if require will 
> post complete output.
> 
> Also I found that perl-LDAP module depands on perl-XML-SAX. Does QMT 
> perl-LDAP module(I don't think so)?
> 
> Regards,
> 
> Amit
> 
> At Wednesday, 28-04-2010 on 0:21 Eric Shubert wrote:
> 
> Steve Huff wrote:
>  > On Apr 27, 2010, at 2:18 PM, Eric Shubert wrote:
>  >
>  >> Perhaps there's another XML parser that is used if XML::SAX
> doesn't exist? I can only speculate. I expect that there are others
> on the list that know better than I do about this.
>  >
>  >
>  > it's the other way around; that error message indicates that
> XML::SAX is falling back to its built-in pure-Perl parser, and the
> fix is to install a better one (or to take action that indicates to
> XML::SAX that yes, you really do want it to use the pure-Perl
> parser). it's all in the FAQ.
>  >
>  > -shuff
>  >
>  > --
> 
> Ah, I see. That makes sense. I read the FAQ but that wasn't clear to me.
> 
> I still wonder though which package Amit could be missing.
> Amit, can you post the result of:
> # sudo -u vpopmail -H spamassassin -D --lint
> 
> -- 
> -Eric 'shubes'
> 
> 
> 
> -
> Qmailtoaster is sponsored by Vickers Consulting Group
> (www.vickersconsulting.com)
> Vickers Consulting Group offers Qmailtoaster support and installations.
> If you need professional help with your setup, contact them today!
> 
> -
> Please visi

[qmailtoaster] Re: Error in Sending Mail

2010-04-27 Thread Amit Dalia

Hi Eric,

If you see error below

ould not find ParserDetails.ini in
/usr/lib/perl5/vendor_perl/5.8.8/XML/SAX
ZSorry, I wasn't able to establish an SMTP connection. (#4.4.1)

I'm unable to understand how perl-XML-SAX is related to SMTP
connection. Is this somewhere related to SMARTHOST? 

Regards,

Amit

At Wednesday, 28-04-2010 on 10:33 Amit Dalia wrote:

Hi Eric,

Please find output of the command you mentioned below:

[r...@mail ~]# sudo -u vpopmail -H spamassassin -D --lint 2>&1 | grep
"diag:"
[18621] dbg: diag: perl platform: 5.008008 linux
[18621] dbg: diag: module installed: Digest::SHA1, version 2.12
[18621] dbg: diag: module installed: HTML::Parser, version 3.64
[18621] dbg: diag: module installed: Net::DNS, version 0.66
[18621] dbg: diag: module installed: MIME::Base64, version 3.07
[18621] dbg: diag: module installed: DB_File, version 1.814
[18621] dbg: diag: module installed: Net::SMTP, version 2.31
[18621] dbg: diag: module installed: Mail::SPF, version v2.006
[18621] dbg: diag: module installed: Mail::SPF::Query, version
1.999001
[18621] dbg: diag: module installed: IP::Country::Fast, version
604.001
[18621] dbg: diag: module installed: Razor2::Client::Agent, version
2.84
[18621] dbg: diag: module installed: Net::Ident, version 1.20
[18621] dbg: diag: module installed: IO::Socket::INET6, version 2.57
[18621] dbg: diag: module installed: IO::Socket::SSL, version 1.31
[18621] dbg: diag: module installed: Compress::Zlib, version 2.024
[18621] dbg: diag: module installed: Time::HiRes, version 1.9717
[18621] dbg: diag: module installed: Mail::DomainKeys, version 1.0
[18621] dbg: diag: module installed: Mail::DKIM, version 0.37
[18621] dbg: diag: module installed: DBI, version 1.609
[18621] dbg: diag: module installed: Getopt::Long, version 2.35
[18621] dbg: diag: module installed: LWP::UserAgent, version 2.033
[18621] dbg: diag: module installed: HTTP::Date, version 1.47
[18621] dbg: diag: module installed: Archive::Tar, version 1.56
[18621] dbg: diag: module installed: IO::Zlib, version 1.10
[18621] dbg: diag: module installed: Encode::Detect, version 1.01

Regards,

Amit

At Wednesday, 28-04-2010 on 10:03 Eric Shubert wrote:

Hey Amit,

I'm particularly interested in the --lint output which lists diag:,
so I 
guess you could do:
# sudo -u vpopmail -H spamassassin -D --lint 2>&1 | grep "diag:"
That will show if modules that are used, and if any are missing.
>From what Steve said though, I'm not sure it will show what all is 
missing with XML/SAX.

The stock QMT does not use LDAP of any kind (that I'm aware of, and
I'm 
pretty sure about that). FWIW, I hope to introduce an LDAP option (in

place of MySQL) once vpopmail 5.5 is fully available. I don't know of
an 
estimated target date for that, but I expect it will be at least
several 
months from now. I'll be happy if we see it by the end of this year.

-- 
-Eric 'shubes'

Amit Dalia wrote:
> Dear Eric/Steve,
> 
> Sorry I agree I should google first.
> 
> Eric: Please find output of command "sudo -u vpopmail -H
spamassassin -D 
> --lint" below:
> 
> [14326] dbg: rules: compiled meta tests
> [14326] dbg: check: running tests for priority: 1000
> [14326] dbg: rules: running head tests; score so far=4.205
> [14326] dbg: rules: compiled head tests
> [14326] dbg: rules: running body tests; score so far=4.205
> [14326] dbg: rules: compiled body tests
> [14326] dbg: rules: running uri tests; score so far=4.205
> [14326] dbg: rules: compiled uri tests
> [14326] dbg: rules: running rawbody tests; score so far=4.205
> [14326] dbg: rules: compiled rawbody tests
> [14326] dbg: rules: running full tests; score so far=4.205
> [14326] dbg: rules: compiled full tests
> [14326] dbg: rules: running meta tests; score so far=4.205
> [14326] dbg: rules: compiled meta tests
> [14326] dbg: check: is spam? score=4.205 required=5
> [14326] dbg: check: 
>
tests=MISSING_DATE,MISSING_HEADERS,MISSING_SUBJECT,NO_RECEIVED,NO_RELAYS
> [14326] dbg: check: 
>
subtests=__HAS_MSGID,__MISSING_REF,__MSGID_OK_DIGITS,__MSGID_OK_HOST,__MSOE_MID_WRONG_CASE,__NONEMPTY_BODY,__SANE_MSGID,__SARE_WHITELIST_FLAG,__TVD_BODY,__UNUSABLE_MSGID
> 
> There was lot more but I thought to post last few line, if require
will 
> post complete output.
> 
> Also I found that perl-LDAP module depands on perl-XML-SAX. Does
QMT 
> perl-LDAP module(I don't think so)?
> 
> Regards,
> 
> Amit
> 
> At Wednesday, 28-04-2010 on 0:21 Eric Shubert wrote:
> 
> Steve Huff wrote:
> > On Apr 27, 2010, at 2:18 PM, Eric Shubert wrote:
> >
> >> Perhaps there's another XML parser that is used if XML::SAX
> doesn't exist? I can only speculate. I expect that there are others
> on the list that know better than I do about this.
> >
> >
> > it's the other way around; that error message indicates that
> XML::SAX is falling back to its built-in pure-Perl parser, and the
> fix is to install a better one (or to take action that indicates to
> XML::SAX that yes, you really do want it to use the pure-Perl
> parser). it's all in the FAQ

[qmailtoaster] Re: Error in Sending Mail

2010-04-27 Thread Amit Dalia

Hi Eric,

Please find output of the command you mentioned below:

[r...@mail ~]# sudo -u vpopmail -H spamassassin -D --lint 2>&1 | grep
"diag:"
[18621] dbg: diag: perl platform: 5.008008 linux
[18621] dbg: diag: module installed: Digest::SHA1, version 2.12
[18621] dbg: diag: module installed: HTML::Parser, version 3.64
[18621] dbg: diag: module installed: Net::DNS, version 0.66
[18621] dbg: diag: module installed: MIME::Base64, version 3.07
[18621] dbg: diag: module installed: DB_File, version 1.814
[18621] dbg: diag: module installed: Net::SMTP, version 2.31
[18621] dbg: diag: module installed: Mail::SPF, version v2.006
[18621] dbg: diag: module installed: Mail::SPF::Query, version
1.999001
[18621] dbg: diag: module installed: IP::Country::Fast, version
604.001
[18621] dbg: diag: module installed: Razor2::Client::Agent, version
2.84
[18621] dbg: diag: module installed: Net::Ident, version 1.20
[18621] dbg: diag: module installed: IO::Socket::INET6, version 2.57
[18621] dbg: diag: module installed: IO::Socket::SSL, version 1.31
[18621] dbg: diag: module installed: Compress::Zlib, version 2.024
[18621] dbg: diag: module installed: Time::HiRes, version 1.9717
[18621] dbg: diag: module installed: Mail::DomainKeys, version 1.0
[18621] dbg: diag: module installed: Mail::DKIM, version 0.37
[18621] dbg: diag: module installed: DBI, version 1.609
[18621] dbg: diag: module installed: Getopt::Long, version 2.35
[18621] dbg: diag: module installed: LWP::UserAgent, version 2.033
[18621] dbg: diag: module installed: HTTP::Date, version 1.47
[18621] dbg: diag: module installed: Archive::Tar, version 1.56
[18621] dbg: diag: module installed: IO::Zlib, version 1.10
[18621] dbg: diag: module installed: Encode::Detect, version 1.01

Regards,

Amit

At Wednesday, 28-04-2010 on 10:03 Eric Shubert wrote:

Hey Amit,

I'm particularly interested in the --lint output which lists diag:,
so I 
guess you could do:
# sudo -u vpopmail -H spamassassin -D --lint 2>&1 | grep "diag:"
That will show if modules that are used, and if any are missing.
>From what Steve said though, I'm not sure it will show what all is 
missing with XML/SAX.

The stock QMT does not use LDAP of any kind (that I'm aware of, and
I'm 
pretty sure about that). FWIW, I hope to introduce an LDAP option (in

place of MySQL) once vpopmail 5.5 is fully available. I don't know of
an 
estimated target date for that, but I expect it will be at least
several 
months from now. I'll be happy if we see it by the end of this year.

-- 
-Eric 'shubes'

Amit Dalia wrote:
> Dear Eric/Steve,
> 
> Sorry I agree I should google first.
> 
> Eric: Please find output of command "sudo -u vpopmail -H
spamassassin -D 
> --lint" below:
> 
> [14326] dbg: rules: compiled meta tests
> [14326] dbg: check: running tests for priority: 1000
> [14326] dbg: rules: running head tests; score so far=4.205
> [14326] dbg: rules: compiled head tests
> [14326] dbg: rules: running body tests; score so far=4.205
> [14326] dbg: rules: compiled body tests
> [14326] dbg: rules: running uri tests; score so far=4.205
> [14326] dbg: rules: compiled uri tests
> [14326] dbg: rules: running rawbody tests; score so far=4.205
> [14326] dbg: rules: compiled rawbody tests
> [14326] dbg: rules: running full tests; score so far=4.205
> [14326] dbg: rules: compiled full tests
> [14326] dbg: rules: running meta tests; score so far=4.205
> [14326] dbg: rules: compiled meta tests
> [14326] dbg: check: is spam? score=4.205 required=5
> [14326] dbg: check: 
>
tests=MISSING_DATE,MISSING_HEADERS,MISSING_SUBJECT,NO_RECEIVED,NO_RELAYS
> [14326] dbg: check: 
>
subtests=__HAS_MSGID,__MISSING_REF,__MSGID_OK_DIGITS,__MSGID_OK_HOST,__MSOE_MID_WRONG_CASE,__NONEMPTY_BODY,__SANE_MSGID,__SARE_WHITELIST_FLAG,__TVD_BODY,__UNUSABLE_MSGID
> 
> There was lot more but I thought to post last few line, if require
will 
> post complete output.
> 
> Also I found that perl-LDAP module depands on perl-XML-SAX. Does
QMT 
> perl-LDAP module(I don't think so)?
> 
> Regards,
> 
> Amit
> 
> At Wednesday, 28-04-2010 on 0:21 Eric Shubert wrote:
> 
> Steve Huff wrote:
> > On Apr 27, 2010, at 2:18 PM, Eric Shubert wrote:
> >
> >> Perhaps there's another XML parser that is used if XML::SAX
> doesn't exist? I can only speculate. I expect that there are others
> on the list that know better than I do about this.
> >
> >
> > it's the other way around; that error message indicates that
> XML::SAX is falling back to its built-in pure-Perl parser, and the
> fix is to install a better one (or to take action that indicates to
> XML::SAX that yes, you really do want it to use the pure-Perl
> parser). it's all in the FAQ.
> >
> > -shuff
> >
> > --
> 
> Ah, I see. That makes sense. I read the FAQ but that wasn't clear
to me.
> 
> I still wonder though which package Amit could be missing.
> Amit, can you post the result of:
> # sudo -u vpopmail -H spamassassin -D --lint
> 
> -- 
> -Eric 'shubes'
> 
> 
>

[qmailtoaster] Re: Error in Sending Mail

2010-04-27 Thread Eric Shubert

Hey Amit,

I'm particularly interested in the --lint output which lists diag:, so I 
guess you could do:

# sudo -u vpopmail -H spamassassin -D --lint 2>&1 | grep "diag:"
That will show if modules that are used, and if any are missing.
From what Steve said though, I'm not sure it will show what all is 
missing with XML/SAX.

The stock QMT does not use LDAP of any kind (that I'm aware of, and I'm 
pretty sure about that). FWIW, I hope to introduce an LDAP option (in 
place of MySQL) once vpopmail 5.5 is fully available. I don't know of an 
estimated target date for that, but I expect it will be at least several 
months from now. I'll be happy if we see it by the end of this year.

--
-Eric 'shubes'

Amit Dalia wrote:

Dear Eric/Steve,

Sorry I agree I should google first.

Eric: Please find output of command "sudo -u vpopmail -H spamassassin -D 
--lint" below:

[14326] dbg: rules: compiled meta tests
[14326] dbg: check: running tests for priority: 1000
[14326] dbg: rules: running head tests; score so far=4.205
[14326] dbg: rules: compiled head tests
[14326] dbg: rules: running body tests; score so far=4.205
[14326] dbg: rules: compiled body tests
[14326] dbg: rules: running uri tests; score so far=4.205
[14326] dbg: rules: compiled uri tests
[14326] dbg: rules: running rawbody tests; score so far=4.205
[14326] dbg: rules: compiled rawbody tests
[14326] dbg: rules: running full tests; score so far=4.205
[14326] dbg: rules: compiled full tests
[14326] dbg: rules: running meta tests; score so far=4.205
[14326] dbg: rules: compiled meta tests
[14326] dbg: check: is spam? score=4.205 required=5
[14326] dbg: check: 
tests=MISSING_DATE,MISSING_HEADERS,MISSING_SUBJECT,NO_RECEIVED,NO_RELAYS
[14326] dbg: check: 
subtests=__HAS_MSGID,__MISSING_REF,__MSGID_OK_DIGITS,__MSGID_OK_HOST,__MSOE_MID_WRONG_CASE,__NONEMPTY_BODY,__SANE_MSGID,__SARE_WHITELIST_FLAG,__TVD_BODY,__UNUSABLE_MSGID

There was lot more but I thought to post last few line, if require will 
post complete output.

Also I found that perl-LDAP module depands on perl-XML-SAX. Does QMT 
perl-LDAP module(I don't think so)?

Regards,

Amit

At Wednesday, 28-04-2010 on 0:21 Eric Shubert wrote:

Steve Huff wrote:
 > On Apr 27, 2010, at 2:18 PM, Eric Shubert wrote:
 >
 >> Perhaps there's another XML parser that is used if XML::SAX
doesn't exist? I can only speculate. I expect that there are others
on the list that know better than I do about this.
 >
 >
 > it's the other way around; that error message indicates that
XML::SAX is falling back to its built-in pure-Perl parser, and the
fix is to install a better one (or to take action that indicates to
XML::SAX that yes, you really do want it to use the pure-Perl
parser). it's all in the FAQ.
 >
 > -shuff
 >
 > --

Ah, I see. That makes sense. I read the FAQ but that wasn't clear to me.

I still wonder though which package Amit could be missing.
Amit, can you post the result of:
# sudo -u vpopmail -H spamassassin -D --lint

-- 
-Eric 'shubes'

-
Qmailtoaster is sponsored by Vickers Consulting Group
(www.vickersconsulting.com)
Vickers Consulting Group offers Qmailtoaster support and installations.
If you need professional help with your setup, contact them today!

-
Please visit qmailtoaster.com for the latest news, updates, and
packages.

To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
   Vickers Consulting Group offers Qmailtoaster support and installations.
 If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.

 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com

For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: Error in Sending Mail

2010-04-27 Thread Amit Dalia

Dear Eric/Steve,

Sorry I agree I should google first. 

Eric: Please find output of command "sudo -u vpopmail -H spamassassin
-D --lint" below:

[14326] dbg: rules: compiled meta tests
[14326] dbg: check: running tests for priority: 1000
[14326] dbg: rules: running head tests; score so far=4.205
[14326] dbg: rules: compiled head tests
[14326] dbg: rules: running body tests; score so far=4.205
[14326] dbg: rules: compiled body tests
[14326] dbg: rules: running uri tests; score so far=4.205
[14326] dbg: rules: compiled uri tests
[14326] dbg: rules: running rawbody tests; score so far=4.205
[14326] dbg: rules: compiled rawbody tests
[14326] dbg: rules: running full tests; score so far=4.205
[14326] dbg: rules: compiled full tests
[14326] dbg: rules: running meta tests; score so far=4.205
[14326] dbg: rules: compiled meta tests
[14326] dbg: check: is spam? score=4.205 required=5
[14326] dbg: check:
tests=MISSING_DATE,MISSING_HEADERS,MISSING_SUBJECT,NO_RECEIVED,NO_RELAYS
[14326] dbg: check:
subtests=__HAS_MSGID,__MISSING_REF,__MSGID_OK_DIGITS,__MSGID_OK_HOST,__MSOE_MID_WRONG_CASE,__NONEMPTY_BODY,__SANE_MSGID,__SARE_WHITELIST_FLAG,__TVD_BODY,__UNUSABLE_MSGID

There was lot more but I thought to post last few line, if require
will post complete output.

Also I found that perl-LDAP module depands on perl-XML-SAX. Does QMT
perl-LDAP module(I don't think so)? 

Regards,

Amit

At Wednesday, 28-04-2010 on 0:21 Eric Shubert wrote:

Steve Huff wrote:
> On Apr 27, 2010, at 2:18 PM, Eric Shubert wrote:
> 
>> Perhaps there's another XML parser that is used if XML::SAX
doesn't exist? I can only speculate. I expect that there are others on
the list that know better than I do about this.
> 
> 
> it's the other way around; that error message indicates that
XML::SAX is falling back to its built-in pure-Perl parser, and the fix
is to install a better one (or to take action that indicates to
XML::SAX that yes, you really do want it to use the pure-Perl parser).
it's all in the FAQ.
> 
> -shuff
> 
> --

Ah, I see. That makes sense. I read the FAQ but that wasn't clear to
me.

I still wonder though which package Amit could be missing.
Amit, can you post the result of:
# sudo -u vpopmail -H spamassassin -D --lint

-- 
-Eric 'shubes'

-
Qmailtoaster is sponsored by Vickers Consulting Group
(www.vickersconsulting.com)
Vickers Consulting Group offers Qmailtoaster support and
installations.
If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and
packages.

To unsubscribe, e-mail:
qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail:
qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: Error in Sending Mail

2010-04-27 Thread Eric Shubert


Steve Huff wrote:

On Apr 27, 2010, at 2:18 PM, Eric Shubert wrote:


Perhaps there's another XML parser that is used if XML::SAX doesn't exist? I 
can only speculate. I expect that there are others on the list that know better 
than I do about this.



it's the other way around; that error message indicates that XML::SAX is 
falling back to its built-in pure-Perl parser, and the fix is to install a 
better one (or to take action that indicates to XML::SAX that yes, you really 
do want it to use the pure-Perl parser).  it's all in the FAQ.

-shuff

--


Ah, I see. That makes sense. I read the FAQ but that wasn't clear to me.

I still wonder though which package Amit could be missing.
Amit, can you post the result of:
# sudo -u vpopmail -H spamassassin -D --lint

--
-Eric 'shubes'


-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
   Vickers Consulting Group offers Qmailtoaster support and installations.
 If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.

 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com

For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Re: Error in Sending Mail

2010-04-27 Thread Steve Huff

On Apr 27, 2010, at 2:18 PM, Eric Shubert wrote:

> Perhaps there's another XML parser that is used if XML::SAX doesn't exist? I 
> can only speculate. I expect that there are others on the list that know 
> better than I do about this.

it's the other way around; that error message indicates that XML::SAX is 
falling back to its built-in pure-Perl parser, and the fix is to install a 
better one (or to take action that indicates to XML::SAX that yes, you really 
do want it to use the pure-Perl parser).  it's all in the FAQ.

-shuff

--
If this were played upon a stage now, I could condemn it as an improbable 
fiction. - Fabian, Twelfth Night, III,v
http://five.sentenc.es

PGP.sig
Description: This is a digitally signed message part

[qmailtoaster] Re: Error in Sending Mail

2010-04-27 Thread Eric Shubert


Steve Huff wrote:

On Apr 27, 2010, at 12:41 PM, Eric Shubert wrote:


I've no idea why you would need XML/SAX/. Is there a rule that uses it that's 
not part of the stock QMT?

How are you installing XML/SAX? I would use the rpmforge repo instead of CPAN, 
but that doesn't really explain why you would need it to begin with.



the error Amit is encountering is so common that it is an entry in the Perl-XML 
FAQ:

http://perl-xml.sourceforge.net/faq/#parserdetails.ini

there are tons of Perl programs that want to use XML::SAX; i would hesitate to 
conjecture which one is involved here.

-steve

--
If this were played upon a stage now, I could condemn it as an improbable 
fiction. - Fabian, Twelfth Night, III,v
http://five.sentenc.es



Nice find, Steve. (Amit, you really should google a little before asking 
 for help on the list)


I'm still curious as to why the stock toaster doesn't appear to have or 
need these modules, yet Amit's QMT is trying to use them. Perhaps 
there's another XML parser that is used if XML::SAX doesn't exist? I can 
only speculate. I expect that there are others on the list that know 
better than I do about this.


--
-Eric 'shubes'


-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
   Vickers Consulting Group offers Qmailtoaster support and installations.
 If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.

 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com

For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Re: Error in Sending Mail

2010-04-27 Thread Steve Huff


On Apr 27, 2010, at 12:41 PM, Eric Shubert wrote:

> I've no idea why you would need XML/SAX/. Is there a rule that uses it that's 
> not part of the stock QMT?
> 
> How are you installing XML/SAX? I would use the rpmforge repo instead of 
> CPAN, but that doesn't really explain why you would need it to begin with.


the error Amit is encountering is so common that it is an entry in the Perl-XML 
FAQ:

http://perl-xml.sourceforge.net/faq/#parserdetails.ini

there are tons of Perl programs that want to use XML::SAX; i would hesitate to 
conjecture which one is involved here.

-steve

--
If this were played upon a stage now, I could condemn it as an improbable 
fiction. - Fabian, Twelfth Night, III,v
http://five.sentenc.es



PGP.sig
Description: This is a digitally signed message part

[qmailtoaster] Re: Error in Sending Mail

2010-04-27 Thread Amit Dalia

Hi Eric,

Windows server just  uses SPAMD daemon to check for spam mails
coming to windows server. Even I use rpmforge repo to install
perl-XML-SAX. I started facing this problem after upgrading to clamav
using qtp-newmodel script. I don't know how?

Also I'm using smarthost to relay mails from same QMT server. Is
there any thing related to this?

Regards,

Amit

At Tuesday, 27-04-2010 on 22:11 Eric Shubert wrote:

Has anything changed on the windows server?

I've no idea why you would need XML/SAX/. Is there a rule that uses
it 
that's not part of the stock QMT?

How are you installing XML/SAX? I would use the rpmforge repo instead
of 
CPAN, but that doesn't really explain why you would need it to begin
with.

Amit Dalia wrote:
> Hi Eric,
> 
> I had just modified 1 file i.e. /var/qmail/supervise/spamd/run.
Content 
> of file is bellow:
> 
> #!/bin/sh
> exec /usr/bin/spamd -x -i -u vpopmail -m 25 -A
127.0.0.1,203.197.88.12 
> -s stderr 2>&1
> 
> where 203.197.88.12 is my old windows server which just connect
spamd 
> daemon of my QMT server. And this I had done around 3 months back. 
> Nothing else modified on server.
> 
> 
> Regards,
> 
> Amit
> 
> At Tuesday, 27-04-2010 on 21:24 Eric Shubert wrote:
> 
> Amit Dalia wrote:
> > Hi Everyone,
> >
> > My all mails started bouncing after sometime with the below
error:
> >
> > Hi. This is the qmail-send program at vanaz.com.
> > I tried to deliver a bounce message to this address, but the
> bounce bounced!
> >
> >  erver>:
> > *ould not find ParserDetails.ini in
> /usr/lib/perl5/vendor_perl/5.8.8/XML/SAX
> > ZSorry, I wasn't able to establish an SMTP connection. (#4.4.1)
> > *
> > This error get solves if I remove and re-install perl-XML-SAX
> file. But
> > next day it starts giving same error.
> >
> > Also on same server I had forgot to set hostname, but after
complete
> > installation of qmail I had modified "/etc/hosts" file and
> > "/var/qmail/control/me" file but still my mails are going on
> > anonym...@mailserver.mailser
> . How
> > do I modify the same?
> >
> > Thanks and Regards,
> >
> > Amit
> 
> I don't have any perl XML SAX in my QMT.
> Have you tailored spamassassin in some way?
> Have you modified the stock QMT in some other way?
> 
> -- 
> -Eric 'shubes'
> 
> 
>
-
> Qmailtoaster is sponsored by Vickers Consulting Group
> (www.vickersconsulting.com)
> Vickers Consulting Group offers Qmailtoaster support and
installations.
> If you need professional help with your setup, contact them today!
>
-
> Please visit qmailtoaster.com for the latest news, updates, and
> packages.
> 
> To unsubscribe, e-mail:
qmailtoaster-list-unsubscr...@qmailtoaster.com
> For additional commands, e-mail:
qmailtoaster-list-h...@qmailtoaster.com
> 

-- 
-Eric 'shubes'

-
Qmailtoaster is sponsored by Vickers Consulting Group
(www.vickersconsulting.com)
Vickers Consulting Group offers Qmailtoaster support and
installations.
If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and
packages.

To unsubscribe, e-mail:
qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail:
qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: Error in Sending Mail

2010-04-27 Thread Eric Shubert

Has anything changed on the windows server?

I've no idea why you would need XML/SAX/. Is there a rule that uses it 
that's not part of the stock QMT?

How are you installing XML/SAX? I would use the rpmforge repo instead of 
CPAN, but that doesn't really explain why you would need it to begin with.

Amit Dalia wrote:

Hi Eric,

I had just modified 1 file i.e. /var/qmail/supervise/spamd/run. Content 
of file is bellow:

#!/bin/sh
exec /usr/bin/spamd -x -i -u vpopmail -m 25 -A 127.0.0.1,203.197.88.12 
-s stderr 2>&1

where 203.197.88.12 is my old windows server which just connect spamd 
daemon of my QMT server. And this I had done around 3 months back. 
Nothing else modified on server.

Regards,

Amit

At Tuesday, 27-04-2010 on 21:24 Eric Shubert wrote:

Amit Dalia wrote:
 > Hi Everyone,
 >
 > My all mails started bouncing after sometime with the below error:
 >
 > Hi. This is the qmail-send program at vanaz.com.
 > I tried to deliver a bounce message to this address, but the
bounce bounced!
 >
 > mailto:anonym...@mailserver.mails>erver>:
 > *ould not find ParserDetails.ini in
/usr/lib/perl5/vendor_perl/5.8.8/XML/SAX
 > ZSorry, I wasn't able to establish an SMTP connection. (#4.4.1)
 > *
 > This error get solves if I remove and re-install perl-XML-SAX
file. But
 > next day it starts giving same error.
 >
 > Also on same server I had forgot to set hostname, but after complete
 > installation of qmail I had modified "/etc/hosts" file and
 > "/var/qmail/control/me" file but still my mails are going on
 > anonym...@mailserver.mailser
. How
 > do I modify the same?
 >
 > Thanks and Regards,
 >
 > Amit

I don't have any perl XML SAX in my QMT.
Have you tailored spamassassin in some way?
Have you modified the stock QMT in some other way?

-- 
-Eric 'shubes'

-
Qmailtoaster is sponsored by Vickers Consulting Group
(www.vickersconsulting.com)
Vickers Consulting Group offers Qmailtoaster support and installations.
If you need professional help with your setup, contact them today!

-
Please visit qmailtoaster.com for the latest news, updates, and
packages.

To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

--
-Eric 'shubes'

-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
   Vickers Consulting Group offers Qmailtoaster support and installations.
 If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.

 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com

For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: Error in Sending Mail

2010-04-27 Thread Amit Dalia

Hi Eric,

I had just modified 1 file i.e. /var/qmail/supervise/spamd/run.
Content of file is bellow:

#!/bin/sh
exec /usr/bin/spamd -x -i -u vpopmail -m 25 -A
127.0.0.1,203.197.88.12 -s stderr 2>&1

where 203.197.88.12 is my old windows server which just connect spamd
daemon of my QMT server. And this I had done around 3 months back.
Nothing else modified on server.

Regards,

Amit

At Tuesday, 27-04-2010 on 21:24 Eric Shubert wrote:

Amit Dalia wrote:
> Hi Everyone,
> 
> My all mails started bouncing after sometime with the below error:
> 
> Hi. This is the qmail-send program at vanaz.com.
> I tried to deliver a bounce message to this address, but the bounce
bounced!
> 
> :
> *ould not find ParserDetails.ini in
/usr/lib/perl5/vendor_perl/5.8.8/XML/SAX
> ZSorry, I wasn't able to establish an SMTP connection. (#4.4.1)
> *
> This error get solves if I remove and re-install perl-XML-SAX file.
But 
> next day it starts giving same error.
> 
> Also on same server I had forgot to set hostname, but after
complete 
> installation of qmail I had modified "/etc/hosts" file and 
> "/var/qmail/control/me" file but still my mails are going on 
> anonym...@mailserver.mailser . How 
> do I modify the same?
> 
> Thanks and Regards,
> 
> Amit

I don't have any perl XML SAX in my QMT.
Have you tailored spamassassin in some way?
Have you modified the stock QMT in some other way?

-- 
-Eric 'shubes'

-
Qmailtoaster is sponsored by Vickers Consulting Group
(www.vickersconsulting.com)
Vickers Consulting Group offers Qmailtoaster support and
installations.
If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and
packages.

To unsubscribe, e-mail:
qmailtoaster-list-unsubscr...@qmailtoaster.com
For additional commands, e-mail:
qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: Error in Sending Mail

2010-04-27 Thread Eric Shubert


Amit Dalia wrote:

Hi Everyone,

My all mails started bouncing after sometime with the below error:

Hi. This is the qmail-send program at vanaz.com.
I tried to deliver a bounce message to this address, but the bounce bounced!

mailto:anonym...@mailserver.mails>erver>:
*ould not find ParserDetails.ini in /usr/lib/perl5/vendor_perl/5.8.8/XML/SAX
ZSorry, I wasn't able to establish an SMTP connection. (#4.4.1)
*
This error get solves if I remove and re-install perl-XML-SAX file. But 
next day it starts giving same error.


Also on same server I had forgot to set hostname, but after complete 
installation of qmail I had modified "/etc/hosts" file and 
"/var/qmail/control/me" file but still my mails are going on 
anonym...@mailserver.mailser . How 
do I modify the same?


Thanks  and Regards,

Amit


I don't have any perl XML SAX in my QMT.
Have you tailored spamassassin in some way?
Have you modified the stock QMT in some other way?

--
-Eric 'shubes'


-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
   Vickers Consulting Group offers Qmailtoaster support and installations.
 If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.

 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com

For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: Error : 571 sorry, you are violating our security policies

2010-04-09 Thread Eric Shubert

Biju Jose wrote:

-Original Message-
From: Eric Shubert [mailto:e...@shubes.net] 
Sent: Friday, April 09, 2010 9:24 PM

To: qmailtoaster-list@qmailtoaster.com
Subject: [qmailtoaster] Re: Error : 571 sorry, you are violating our
security policies

Biju Jose wrote:
I need to allow a particular IP to send unlimited emails thru our qmail 
toaster server.

We have the following line in the tcp.smtp file.

220.xxx.yyy.zzz.:allow,RELAYCLIENT="",DKSIGN="/var/qmail/control/domainkeys/
%/private",RBLSMTPD="",NOP0FCHECK="1"

After a few messages I am getting the following error.

RCPT TO:

571 sorry, you are violating our security policies (#5.7.1 - chkuser)

((|2|00096N01-BC|09-Apr-10|1011008|BC|someb...@gmail.com|))571 sorry, 
you are violating our security policies (#5.7.1 - chkuser)

MAIL FROM: AUTH=

250 ok

I need to allow this IP to send about 2000 messages in a stretch. How do 
I resolve this issue? Your help is much appreciated.

*Biju Jose*

Mobile : +91 9895 990 272

Refer to the chkuser web site 
(http://www.interazioni.it/opensource/chkuser/), and the 
/var/qmail/doc/chkuser.h file for QMT settings.

I believe you can change these settings by adding variables to your 
tcp.smtp line, e.g.:

220.xxx.yyy.zzz.:allow,RELAYCLIENT="",DKSIGN="/var/qmail/control/domainkeys/
%/private",RBLSMTPD="",NOP0FCHECK="1",CHKUSER_WRONGRCPTLIMIT="200"

I'm guessing you're right, that you're receiving the 
CHKUSER_INTRUSIONTHRESHOLD_STRING message. I don't know what triggers 
this message. You can use the above method to change the message text in 
order to verify that this is the error you're getting. I'm a little 
surprised that error message descriptions aren't unique. You might want 
to write to Antonio Nati (chkuser's author mailto:to...@interazioni.it) 
for clarification, or just check the source code.

Let us know how you make out.

--
-Eric 'shubes'

-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
   Vickers Consulting Group offers Qmailtoaster support and installations.
 If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.

 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com

For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

RE: [qmailtoaster] Re: Error : 571 sorry, you are violating our security policies

2010-04-09 Thread Biju Jose

-Original Message-
From: Eric Shubert [mailto:e...@shubes.net] 
Sent: Friday, April 09, 2010 9:24 PM
To: qmailtoaster-list@qmailtoaster.com
Subject: [qmailtoaster] Re: Error : 571 sorry, you are violating our
security policies

Biju Jose wrote:
> I need to allow a particular IP to send unlimited emails thru our qmail 
> toaster server.
> 
>  
> 
> We have the following line in the tcp.smtp file.
> 
>  
> 
>
220.xxx.yyy.zzz.:allow,RELAYCLIENT="",DKSIGN="/var/qmail/control/domainkeys/
%/private",RBLSMTPD="",NOP0FCHECK="1"
> 
>  
> 
> After a few messages I am getting the following error.
> 
>  
> 
> RCPT TO:
> 
> 571 sorry, you are violating our security policies (#5.7.1 - chkuser)
> 
> ((|2|00096N01-BC|09-Apr-10|1011008|BC|someb...@gmail.com|))571 sorry, 
> you are violating our security policies (#5.7.1 - chkuser)
> 
> MAIL FROM: AUTH=
> 
> 250 ok
> 
>  
> 
> I need to allow this IP to send about 2000 messages in a stretch. How do 
> I resolve this issue? Your help is much appreciated.
> 
>  
> 
> *Biju Jose*
> 
> Mobile : +91 9895 990 272
> 
>  
> 

Refer to the chkuser web site 
(http://www.interazioni.it/opensource/chkuser/), and the 
/var/qmail/doc/chkuser.h file for QMT settings.

-- 
-Eric 'shubes'

Thanks for the directions Eric.

I had checked at
http://www.interazioni.it/opensource/chkuser/documentation/chkuser_settings.
html and found the error is triggered by the following.

CHKUSER_MAXWRONGRCPT_STRING 2.0.5 defined "571 sorry, you are violating our
security policies (#5.1.1 - chkuser)\r\n"  
CHKUSER_INTRUSIONTHRESHOLD_STRING  2.0.5 defined "571 sorry, you are
violating our security policies (#5.7.1 - chkuser)\r\n"  

Here I know for sure that the email ids all are valid as it was being
delivered till we switched it to the qmailtoaster. Each email has only one
recipient with a PDF file as attachment. So I guess I am left with "
CHKUSER_INTRUSIONTHRESHOLD_STRING " . 

On this page
(http://blog.gmane.org/gmane.mail.qmail.toaster/month=20071101/page=1 )there
is a suggestion to change CHKUSER_RCPTLIMIT="200",
CHKUSER_WRONGRCPTLIMIT="200" and then qmailctl cdb , qmailctl stop and
qmailctl start. I had done this, need to test tomorrow and shall revert.

Thanks

Biju Jose

-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
Vickers Consulting Group offers Qmailtoaster support and installations.
  If you need professional help with your setup, contact them today!
-
 Please visit qmailtoaster.com for the latest news, updates, and packages.

  To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: Error : 571 sorry, you are violating our security policies

2010-04-09 Thread Eric Shubert


Biju Jose wrote:
I need to allow a particular IP to send unlimited emails thru our qmail 
toaster server.


 


We have the following line in the tcp.smtp file.

 


220.xxx.yyy.zzz.:allow,RELAYCLIENT="",DKSIGN="/var/qmail/control/domainkeys/%/private",RBLSMTPD="",NOP0FCHECK="1"

 


After a few messages I am getting the following error.

 


RCPT TO:

571 sorry, you are violating our security policies (#5.7.1 - chkuser)

((|2|00096N01-BC|09-Apr-10|1011008|BC|someb...@gmail.com|))571 sorry, 
you are violating our security policies (#5.7.1 - chkuser)


MAIL FROM: AUTH=

250 ok

 

I need to allow this IP to send about 2000 messages in a stretch. How do 
I resolve this issue? Your help is much appreciated.


 


*Biju Jose*

Mobile : +91 9895 990 272

 



Refer to the chkuser web site 
(http://www.interazioni.it/opensource/chkuser/), and the 
/var/qmail/doc/chkuser.h file for QMT settings.


--
-Eric 'shubes'


-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
   Vickers Consulting Group offers Qmailtoaster support and installations.
 If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.

 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com

For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Re: error 5.1.1

2010-03-17 Thread madmac


Thanks for the rply eric,
This happens when a clienet sends to multiple emails at the same time, 
from Outlook,
I will check the logs, and also try what you nentioned in the other 
email.. ref: chkuser


Thanks

Eric Shubert wrote:

madmac wrote:

Hi guys
recently stared getting a load of this:

*511 sorry, recipient address has invalid format (#5.1.1 -chkuser)*

But looking at the emails being sent, they are correct, no funky 
characters.

found this on google :

SMTP Error 511 : Bad email address. This error is
similar to error 510 and as with error 510, this status code
is generated by the sender’s local mail server.
If the email was addressed internally, then it means that
the addressee, as written in the email’s TO, CC, or BCC
fields, does not exist in your organization’s email system.
If the email was addressed externally, then the recipient’s
email address was misspelt.

But as I said, the addresses are formated correctly

Any Ideas, Thanks


You haven't really given us much to go on. Can you post the log 
messages involved? Is this submission or smtp port? I'm guessing that 
this happens when emails are submitted, and there is no bounce involved?





-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
   Vickers Consulting Group offers Qmailtoaster support and installations.
 If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.

 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com

For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: error 5.1.1

2010-03-17 Thread Eric Shubert


madmac wrote:

Hi guys
recently stared getting a load of this:

*511 sorry, recipient address has invalid format (#5.1.1 -chkuser)*

But looking at the emails being sent, they are correct, no funky characters.
found this on google :

SMTP Error 511 : Bad email address. This error is
similar to error 510 and as with error 510, this status code
is generated by the sender’s local mail server.
If the email was addressed internally, then it means that
the addressee, as written in the email’s TO, CC, or BCC
fields, does not exist in your organization’s email system.
If the email was addressed externally, then the recipient’s
email address was misspelt.

But as I said, the addresses are formated correctly

Any Ideas, 
Thanks


You haven't really given us much to go on. Can you post the log messages 
involved? Is this submission or smtp port? I'm guessing that this 
happens when emails are submitted, and there is no bounce involved?


--
-Eric 'shubes'


-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
   Vickers Consulting Group offers Qmailtoaster support and installations.
 If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.

 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com

For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Re: error in logs

2010-02-12 Thread madmac


Thanks Eric, that fixed it


Eric Shubert wrote:

madmac wrote:

Can anyone tell me waht this error means and how to fix please.
it is in: /var/log/secure , multiple times

sorry, you must have a tty to run sudo ; TTY=unknown ; PWD=/ ; 
USER=vpopmail ; COMM AND=/usr/bin/sa-learn --sync


Maybe something to do with spamassasin?

thanks
madmac


- 



Yeah. In order to sudo to vpopmail to run sa-learn from a cron job, 
sudo needs to be configured to allow processes that are not attached 
to a terminal to use sudo.


To change the sudo configuration,
# visudo
will put you into edit with vi on the sudo configuration file. You 
should use this command to edit the sudo configuration. Find the line 
that says requiretty and comment it out, as such:

#Defaultsrequiretty

That should fix it.




-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
   Vickers Consulting Group offers Qmailtoaster support and installations.
 If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.

 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com

For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: error in logs

2010-02-12 Thread Eric Shubert


madmac wrote:

Can anyone tell me waht this error means and how to fix please.
it is in: /var/log/secure , multiple times

sorry, you must have a tty to run sudo ; TTY=unknown ; PWD=/ ; 
USER=vpopmail ; COMM AND=/usr/bin/sa-learn --sync


Maybe something to do with spamassasin?

thanks
madmac


- 


Yeah. In order to sudo to vpopmail to run sa-learn from a cron job, sudo 
needs to be configured to allow processes that are not attached to a 
terminal to use sudo.


To change the sudo configuration,
# visudo
will put you into edit with vi on the sudo configuration file. You 
should use this command to edit the sudo configuration. Find the line 
that says requiretty and comment it out, as such:

#Defaultsrequiretty

That should fix it.

--
-Eric 'shubes'


-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
   Vickers Consulting Group offers Qmailtoaster support and installations.
 If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.

 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com

For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Re: ERROR: configuration specifies 'use_bayes 0', sa-learn disabled

2009-11-29 Thread Jake Vickers


Jake Vickers wrote:

Rajesh M wrote:

hi

well i don't use bayes

i use the normal rules only which handles all the spam and i am getting
around 98-99 percent spam protection.

rajesh

 

I have the following in local.cf:
#
ok_locales all
skip_rbl_checks 0

required_score 3.7
report_safe 0
rewrite_header Subject [SPAM]

use_pyzor 1

use_auto_whitelist 1

bayes_path /home/vpopmail/.spamassassin/bayes
use_bayes 1
use_bayes_rules 1
bayes_auto_learn 1
bayes_auto_learn_threshold_spam 7.0
bayes_auto_learn_threshold_nonspam 0.1
bayes_auto_expire 0

loadplugin Mail::SpamAssassin::Plugin::URIDNSBL
trusted_networks 192.168/16
#

Is there some reason you have bayes turned off?

--
-Eric 'shubes'

Rajesh M wrote:
   

hello

###

ok_locales all
skip_rbl_checks 1

required_score 5
report_safe 1
rewrite_header subject ---SPAM---
use_razor2 1
#use_pyzor 1
#use_auto_whitelist 1
use_bayes 0
use_bayes_rules 0
bayes_auto_learn 0

###

spamassassin --lint gives no errors

rajesh



 

Rajesh M wrote:
   

hi all

i faced this error for the first time

tried googling and also the toaster forums but got no info

i need to know what this error means and how to resolve the same


thanks to all in advance

rajesh


clarifications
mailer-dae...@ns1.serverdomain.com -- is bounce address of my server
: -- is a valid user on my server

##
Mail headers
From mailer-dae...@ns1.serverdomain.com
To a#...@sender.com
Sent 27 Nov 2009 09:22:26 -
Subject failure notice

Hi. This is the qmail-send program at ns1.corpmailserver.com.
I'm afraid I wasn't able to deliver your message to the following
addresses.
This is a permanent error; I've given up. Sorry it didn't work out.

:
ERROR: configuration specifies 'use_bayes 0', sa-learn disabled
maildrop: error writing to mailbox.
/usr/bin/maildrop: Unable to deliver to mailbox.
I'm not going to try again; this message has been in the queue too
long.

##


  

What's in your /etc/mail/spamassassin/local.cf file?

--
-Eric 'shubes'





Did you try and enable the Spam box with this user? The Spam box will 
require Bayes to be enabled.




Actually I should rephrase that.
The current maildrop script that is run when you have the Spambox 
enabled and a spam message comes in also pipes the message to sa-learn. 
Since you have Bayes turned off, this will spawn an error. You can 
either turn off the Spambox, or modify the script to no longer pipe the 
messages to sa-learn.



-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
   Vickers Consulting Group offers Qmailtoaster support and installations.
 If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.

 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com

For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Re: ERROR: configuration specifies 'use_bayes 0', sa-learn disabled

2009-11-29 Thread Jake Vickers


Rajesh M wrote:

hi

well i don't use bayes

i use the normal rules only which handles all the spam and i am getting
around 98-99 percent spam protection.

rajesh

  

I have the following in local.cf:
#
ok_locales all
skip_rbl_checks 0

required_score 3.7
report_safe 0
rewrite_header Subject [SPAM]

use_pyzor 1

use_auto_whitelist 1

bayes_path /home/vpopmail/.spamassassin/bayes
use_bayes 1
use_bayes_rules 1
bayes_auto_learn 1
bayes_auto_learn_threshold_spam 7.0
bayes_auto_learn_threshold_nonspam 0.1
bayes_auto_expire 0

loadplugin Mail::SpamAssassin::Plugin::URIDNSBL
trusted_networks 192.168/16
#

Is there some reason you have bayes turned off?

--
-Eric 'shubes'

Rajesh M wrote:


hello

###

ok_locales all
skip_rbl_checks 1

required_score 5
report_safe 1
rewrite_header subject ---SPAM---
use_razor2 1
#use_pyzor 1
#use_auto_whitelist 1
use_bayes 0
use_bayes_rules 0
bayes_auto_learn 0

###

spamassassin --lint gives no errors

rajesh



  

Rajesh M wrote:


hi all

i faced this error for the first time

tried googling and also the toaster forums but got no info

i need to know what this error means and how to resolve the same


thanks to all in advance

rajesh


clarifications
mailer-dae...@ns1.serverdomain.com -- is bounce address of my server
: -- is a valid user on my server

##
Mail headers
Frommailer-dae...@ns1.serverdomain.com
To  a#...@sender.com
Sent27 Nov 2009 09:22:26 -
Subject failure notice

Hi. This is the qmail-send program at ns1.corpmailserver.com.
I'm afraid I wasn't able to deliver your message to the following
addresses.
This is a permanent error; I've given up. Sorry it didn't work out.

:
ERROR: configuration specifies 'use_bayes 0', sa-learn disabled
maildrop: error writing to mailbox.
/usr/bin/maildrop: Unable to deliver to mailbox.
I'm not going to try again; this message has been in the queue too
long.

##


  

What's in your /etc/mail/spamassassin/local.cf file?

--
-Eric 'shubes'





Did you try and enable the Spam box with this user? The Spam box will 
require Bayes to be enabled.



-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
   Vickers Consulting Group offers Qmailtoaster support and installations.
 If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.

 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com

For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: ERROR: configuration specifies 'use_bayes 0', sa-learn disabled

2009-11-28 Thread Eric Shubert


Rajesh M wrote:

hi all

i faced this error for the first time

tried googling and also the toaster forums but got no info

i need to know what this error means and how to resolve the same


thanks to all in advance

rajesh


clarifications
mailer-dae...@ns1.serverdomain.com -- is bounce address of my server
: -- is a valid user on my server

##
Mail headers
Frommailer-dae...@ns1.serverdomain.com
To  a#...@sender.com
Sent27 Nov 2009 09:22:26 -
Subject failure notice

Hi. This is the qmail-send program at ns1.corpmailserver.com.
I'm afraid I wasn't able to deliver your message to the following addresses.
This is a permanent error; I've given up. Sorry it didn't work out.

:
ERROR: configuration specifies 'use_bayes 0', sa-learn disabled
maildrop: error writing to mailbox.
/usr/bin/maildrop: Unable to deliver to mailbox.
I'm not going to try again; this message has been in the queue too long.

##



I don't know why it's showing ERROR when bayes is turned off.

Have you checked permissions on this user's mailbox?
Have you tried deleting and re-adding the user's account?

--
-Eric 'shubes'


-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
   Vickers Consulting Group offers Qmailtoaster support and installations.
 If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.

 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com

For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Re: ERROR: configuration specifies 'use_bayes 0', sa-learn disabled

2009-11-28 Thread Rajesh M

hi

well i don't use bayes

i use the normal rules only which handles all the spam and i am getting
around 98-99 percent spam protection.

rajesh

> I have the following in local.cf:
> #
> ok_locales all
> skip_rbl_checks 0
>
> required_score 3.7
> report_safe 0
> rewrite_header Subject [SPAM]
>
> use_pyzor 1
>
> use_auto_whitelist 1
>
> bayes_path /home/vpopmail/.spamassassin/bayes
> use_bayes 1
> use_bayes_rules 1
> bayes_auto_learn 1
> bayes_auto_learn_threshold_spam 7.0
> bayes_auto_learn_threshold_nonspam 0.1
> bayes_auto_expire 0
>
> loadplugin Mail::SpamAssassin::Plugin::URIDNSBL
> trusted_networks 192.168/16
> #
>
> Is there some reason you have bayes turned off?
>
> --
> -Eric 'shubes'
>
> Rajesh M wrote:
>> hello
>>
>> ###
>>
>> ok_locales all
>> skip_rbl_checks 1
>>
>> required_score 5
>> report_safe 1
>> rewrite_header subject ---SPAM---
>> use_razor2 1
>> #use_pyzor 1
>> #use_auto_whitelist 1
>> use_bayes 0
>> use_bayes_rules 0
>> bayes_auto_learn 0
>>
>> ###
>>
>> spamassassin --lint gives no errors
>>
>> rajesh
>>
>>
>>
>>> Rajesh M wrote:
 hi all

 i faced this error for the first time

 tried googling and also the toaster forums but got no info

 i need to know what this error means and how to resolve the same


 thanks to all in advance

 rajesh


 clarifications
 mailer-dae...@ns1.serverdomain.com -- is bounce address of my server
 : -- is a valid user on my server

 ##
 Mail headers
 From   mailer-dae...@ns1.serverdomain.com
 To a#...@sender.com
 Sent   27 Nov 2009 09:22:26 -
 Subjectfailure notice

 Hi. This is the qmail-send program at ns1.corpmailserver.com.
 I'm afraid I wasn't able to deliver your message to the following
 addresses.
 This is a permanent error; I've given up. Sorry it didn't work out.

 :
 ERROR: configuration specifies 'use_bayes 0', sa-learn disabled
 maildrop: error writing to mailbox.
 /usr/bin/maildrop: Unable to deliver to mailbox.
 I'm not going to try again; this message has been in the queue too
 long.

 ##


>>> What's in your /etc/mail/spamassassin/local.cf file?
>>>
>>> --
>>> -Eric 'shubes'
>>>
>>>
>
>
> -
> Qmailtoaster is sponsored by Vickers Consulting Group
> (www.vickersconsulting.com)
> Vickers Consulting Group offers Qmailtoaster support and
> installations.
>   If you need professional help with your setup, contact them today!
> -
>  Please visit qmailtoaster.com for the latest news, updates, and
> packages.
>
>   To unsubscribe, e-mail:
> qmailtoaster-list-unsubscr...@qmailtoaster.com
>  For additional commands, e-mail:
> qmailtoaster-list-h...@qmailtoaster.com
>
>
>






-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
Vickers Consulting Group offers Qmailtoaster support and installations.
  If you need professional help with your setup, contact them today!
-
 Please visit qmailtoaster.com for the latest news, updates, and packages.
 
  To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

[qmailtoaster] Re: ERROR: configuration specifies 'use_bayes 0', sa-learn disabled

2009-11-27 Thread Eric Shubert


I have the following in local.cf:
#
ok_locales all
skip_rbl_checks 0

required_score 3.7
report_safe 0
rewrite_header Subject [SPAM]

use_pyzor 1

use_auto_whitelist 1

bayes_path /home/vpopmail/.spamassassin/bayes
use_bayes 1
use_bayes_rules 1
bayes_auto_learn 1
bayes_auto_learn_threshold_spam 7.0
bayes_auto_learn_threshold_nonspam 0.1
bayes_auto_expire 0

loadplugin Mail::SpamAssassin::Plugin::URIDNSBL
trusted_networks 192.168/16
#

Is there some reason you have bayes turned off?

--
-Eric 'shubes'

Rajesh M wrote:

hello

###

ok_locales all
skip_rbl_checks 1

required_score 5
report_safe 1
rewrite_header subject ---SPAM---
use_razor2 1
#use_pyzor 1
#use_auto_whitelist 1
use_bayes 0
use_bayes_rules 0
bayes_auto_learn 0

###

spamassassin --lint gives no errors

rajesh




Rajesh M wrote:

hi all

i faced this error for the first time

tried googling and also the toaster forums but got no info

i need to know what this error means and how to resolve the same


thanks to all in advance

rajesh


clarifications
mailer-dae...@ns1.serverdomain.com -- is bounce address of my server
: -- is a valid user on my server

##
Mail headers
Frommailer-dae...@ns1.serverdomain.com
To  a#...@sender.com
Sent27 Nov 2009 09:22:26 -
Subject failure notice

Hi. This is the qmail-send program at ns1.corpmailserver.com.
I'm afraid I wasn't able to deliver your message to the following
addresses.
This is a permanent error; I've given up. Sorry it didn't work out.

:
ERROR: configuration specifies 'use_bayes 0', sa-learn disabled
maildrop: error writing to mailbox.
/usr/bin/maildrop: Unable to deliver to mailbox.
I'm not going to try again; this message has been in the queue too long.

##



What's in your /etc/mail/spamassassin/local.cf file?

--
-Eric 'shubes'





-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
   Vickers Consulting Group offers Qmailtoaster support and installations.
 If you need professional help with your setup, contact them today!
-
Please visit qmailtoaster.com for the latest news, updates, and packages.

 To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com

For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

Re: [qmailtoaster] Re: ERROR: configuration specifies 'use_bayes 0', sa-learn disabled

2009-11-27 Thread Rajesh M

hello

###

ok_locales all
skip_rbl_checks 1

required_score 5
report_safe 1
rewrite_header subject ---SPAM---
use_razor2 1
#use_pyzor 1
#use_auto_whitelist 1
use_bayes 0
use_bayes_rules 0
bayes_auto_learn 0

###

spamassassin --lint gives no errors

rajesh



> Rajesh M wrote:
>> hi all
>>
>> i faced this error for the first time
>>
>> tried googling and also the toaster forums but got no info
>>
>> i need to know what this error means and how to resolve the same
>>
>>
>> thanks to all in advance
>>
>> rajesh
>>
>>
>> clarifications
>> mailer-dae...@ns1.serverdomain.com -- is bounce address of my server
>> : -- is a valid user on my server
>>
>> ##
>> Mail headers
>> From mailer-dae...@ns1.serverdomain.com
>> To   a#...@sender.com
>> Sent 27 Nov 2009 09:22:26 -
>> Subject  failure notice
>>
>> Hi. This is the qmail-send program at ns1.corpmailserver.com.
>> I'm afraid I wasn't able to deliver your message to the following
>> addresses.
>> This is a permanent error; I've given up. Sorry it didn't work out.
>>
>> :
>> ERROR: configuration specifies 'use_bayes 0', sa-learn disabled
>> maildrop: error writing to mailbox.
>> /usr/bin/maildrop: Unable to deliver to mailbox.
>> I'm not going to try again; this message has been in the queue too long.
>>
>> ##
>>
>>
>
> What's in your /etc/mail/spamassassin/local.cf file?
>
> --
> -Eric 'shubes'
>
>
> -
> Qmailtoaster is sponsored by Vickers Consulting Group
> (www.vickersconsulting.com)
> Vickers Consulting Group offers Qmailtoaster support and
> installations.
>   If you need professional help with your setup, contact them today!
> -
>  Please visit qmailtoaster.com for the latest news, updates, and
> packages.
>
>   To unsubscribe, e-mail:
> qmailtoaster-list-unsubscr...@qmailtoaster.com
>  For additional commands, e-mail:
> qmailtoaster-list-h...@qmailtoaster.com
>
>
>






-
Qmailtoaster is sponsored by Vickers Consulting Group 
(www.vickersconsulting.com)
Vickers Consulting Group offers Qmailtoaster support and installations.
  If you need professional help with your setup, contact them today!
-
 Please visit qmailtoaster.com for the latest news, updates, and packages.
 
  To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
 For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com

1 2 >

1 - 100 of 101 matches

Mail list logo