but have in Europe.
>
> *From:* Steve Jones
> *Sent:* Wednesday, June 21, 2017 9:54 AM
> *To:* af@afmug.com
> *Subject:* [AFMUG] i want this
>
> between my house and garage, out to my patio, all around my house
> http://www.trenwa.com/component-trench/
>
Some cities us those. Have not seen in the U.S. but have in Europe.
From: Steve Jones
Sent: Wednesday, June 21, 2017 9:54 AM
To: af@afmug.com
Subject: [AFMUG] i want this
between my house and garage, out to my patio, all around my house
http://www.trenwa.com/component-trench/
Animal Heaven!!!
On 06/21/2017 08:54 AM, Steve Jones wrote:
between my house and garage, out to my patio, all around my house
http://www.trenwa.com/component-trench/
.
-- Original Message --
From: "Jesse DuPont" <jesse.dup...@celeritycorp.net>
To: af@afmug.com
Sent: 2/3/2017 11:05:37 AM
Subject: Re: [AFMUG] I Want
Does anyone have a document or wiki that describes how to take an
off-the-shelf AC standby generator and use it at a so
Well Forest did a very nice product at one time that would do exactly that.
I think many hope he revives that project.
From: Jesse DuPont
Sent: Friday, February 3, 2017 9:05 AM
To: af@afmug.com
Subject: Re: [AFMUG] I Want
Does anyone have a document or wiki that describes how to take
: Adam
Moffett
Sent: Friday, February 3, 2017 8:56 AM
To: af@afmug.com
Subject: Re: [AFMUG] I Want
However you get there, the nice thing about DC is you
: [AFMUG] I Want
However you get there, the nice thing about DC is you don't have to stay at
3600 RPM. It's a big part of why inverter generators last so long on small
loads.
-- Original Message --
From: "Mark Radabaugh" <m...@amplex.net>
To: af@afmug.com
Sent: 2/3/
9 AM
Subject: Re: [AFMUG] I Want
From an engineering standpoint I would expect a DC generator to be
higher maintenance than an AC generator. True DC generators have
brushes that wear while AC generators have very little other than
bearings to wear out. Alternators (like your car has) are actuall
ctifier failure.
>
> From: That One Guy /sarcasm <>
> Sent: Thursday, February 02, 2017 3:44 PM
> To: af@afmug.com <>
> Subject: Re: [AFMUG] I Want
>
> if youre doing a standby generator at a dc site, even an AC fed DC site,
> wouldnt it be more efficient to use a dc
Well, it certainly would protect you in the event of rectifier failure.
From: That One Guy /sarcasm
Sent: Thursday, February 02, 2017 3:44 PM
To: af@afmug.com
Subject: Re: [AFMUG] I Want
if youre doing a standby generator at a dc site, even an AC fed DC site,
wouldnt it be more efficient
---
> From: "Chuck McCown" <ch...@wbmfg.com>
> To: af@afmug.com
> Sent: 2/2/2017 5:28:39 PM
> Subject: Re: [AFMUG] I Want
>
>
> Perfect for off-grid solar backup.
>
> *From:* Adam Moffett
> *Sent:* Thursday, February 02, 2017 3:27 PM
> *To:* af@afmug.com
Ah yes, I see.
-- Original Message --
From: "Chuck McCown" <ch...@wbmfg.com>
To: af@afmug.com
Sent: 2/2/2017 5:28:39 PM
Subject: Re: [AFMUG] I Want
Perfect for off-grid solar backup.
From:Adam Moffett
Sent: Thursday, February 02, 2017 3:27 PM
To:af@afmug.com
Subjec
Perfect for off-grid solar backup.
From: Adam Moffett
Sent: Thursday, February 02, 2017 3:27 PM
To: af@afmug.com
Subject: Re: [AFMUG] I Want
Man, sounds like a lot of money for 6kW.
Variable speed must save a lot of gas though.
-- Original Message --
From: "Chuck McCown
Man, sounds like a lot of money for 6kW.
Variable speed must save a lot of gas though.
-- Original Message --
From: "Chuck McCown" <ch...@wbmfg.com>
To: af@afmug.com
Sent: 2/2/2017 5:25:35 PM
Subject: [AFMUG] I Want
Have to come up with a reason but I want it:
https:/
Have to come up with a reason but I want it:
https://www.norwall.com/products/Kohler-6kW-Variable-Speed-Direct-Current-Generator-with-Oil-Make-Up-Kit-48-Volt-DC-6VSG?cid=google_feed_tracker=6374-6VSG-QS13=COWuo4-68tECFUdlfgodl8oG_A
Maybe I'll get 4 pieces of sheet metal and make my own "hi perf" shroud.
-- Original Message --
From: ch...@wbmfg.com
To: af@afmug.com
Sent: 9/30/2016 3:11:39 PM
Subject: Re: [AFMUG] I want a "Stinger like" antenna for Wimax CPE
Panels have pretty good F/B ratio
Panels have pretty good F/B ratio but yes, an RF armor type of thing would
knock off some side lobes.
From: Adam Moffett
Sent: Friday, September 30, 2016 1:10 PM
To: af@afmug.com
Subject: Re: [AFMUG] I want a "Stinger like" antenna for Wimax CPE
Since the goal in this case isn't
Since the goal in this case isn't more gain, but narrower pattern, what
about an "RF Armor" type of thing?
-- Original Message --
From: ch...@wbmfg.com
To: af@afmug.com
Sent: 9/30/2016 3:08:42 PM
Subject: Re: [AFMUG] I want a "Stinger like" antenna for Wimax CPE
Yeah, but you have a fairly electrically large panel as a feed, so you would
need a reflector 10 feet in diameter to properly illuminate it.
From: Josh Reynolds
Sent: Friday, September 30, 2016 1:05 PM
To: af@afmug.com
Subject: Re: [AFMUG] I want a "Stinger like" antenna for Wimax
Sand casting. I can copy stuff in half hour if the draft angles are correct.
Been going on for centuries.
Our whole industrial revolution was all done with hand made wooden patterns.
From: Bill Prince
Sent: Friday, September 30, 2016 1:03 PM
To: af@afmug.com
Subject: Re: [AFMUG] I want
Nothing magic about our designs, we have good test data but most importantly we
do a very heavy duty hot dip galvanization. They ought to last forever.
From: That One Guy /sarcasm
Sent: Friday, September 30, 2016 1:02 PM
To: af@afmug.com
Subject: Re: [AFMUG] I want a "Stinger like&quo
> *To:* af@afmug.com
> *Subject:* Re: [AFMUG] I want a "Stinger like" antenna for Wimax CPE
>
> Or were you serious? If I have access to machine tools can I make
> licensed knockoffs of M-TOW?
>
>
> -- Original Message --
> From: "Adam Moffett" &
"Cameron Crum" <cc...@wispmon.com <mailto:cc...@wispmon.com>>
To: "af@afmug.com <mailto:af@afmug.com>" <af@afmug.com
<mailto:af@afmug.com>>
Sent: 9/30/2016 2:02:06 PM
Subject: Re: [AFMUG] I want a "Stinger like" antenna for Wimax C
wrote:
> Not sure there is anyone stopping it. Kinda hard to patent tower mounting
> hardware.
>
> *From:* Adam Moffett
> *Sent:* Friday, September 30, 2016 12:51 PM
> *To:* af@afmug.com
> *Subject:* Re: [AFMUG] I want a "Stinger like" antenna for Wimax CPE
>
Not sure there is anyone stopping it. Kinda hard to patent tower mounting
hardware.
From: Adam Moffett
Sent: Friday, September 30, 2016 12:51 PM
To: af@afmug.com
Subject: Re: [AFMUG] I want a "Stinger like" antenna for Wimax CPE
Or were you serious? If I have access to machine t
Or were you serious? If I have access to machine tools can I make
licensed knockoffs of M-TOW?
-- Original Message --
From: "Adam Moffett" <dmmoff...@gmail.com>
To: af@afmug.com
Sent: 9/30/2016 2:50:14 PM
Subject: Re: [AFMUG] I want a "Stinger like" ant
Write it with a crayon on the back of your Burger King napkin.
-- Original Message --
From: ch...@wbmfg.com
To: af@afmug.com
Sent: 9/30/2016 2:49:34 PM
Subject: Re: [AFMUG] I want a "Stinger like" antenna for Wimax CPE
I will sell you a license today!
From:That One Guy /sa
I will sell you a license today!
From: That One Guy /sarcasm
Sent: Friday, September 30, 2016 12:31 PM
To: af@afmug.com
Subject: Re: [AFMUG] I want a "Stinger like" antenna for Wimax CPE
i cant wait til 3d printers do galavanized steel. mccown tech can eliminate the
hateful ven
It needs to replicate something that tastes like ice cream but has the
nutritional value of salad.
-- Original Message --
From: "Bill Prince" <part15...@gmail.com>
To: af@afmug.com
Sent: 9/30/2016 2:33:40 PM
Subject: Re: [AFMUG] I want a "Stinger like" anten
<af@afmug.com
<mailto:af@afmug.com>>
Sent: 9/30/2016 2:02:06 PM
Subject: Re: [AFMUG] I want a "Stinger like" antenna for Wimax CPE
When I was building slotted waveguide antennas for our network,
we needed a way to seal up the slots so the rain wouldn't fil
on people are going for one-offs.
>
>
> -- Original Message --
> From: "Cameron Crum" <cc...@wispmon.com>
> To: "af@afmug.com" <af@afmug.com>
> Sent: 9/30/2016 2:02:06 PM
> Subject: Re: [AFMUG] I want a "Stinger like" antenna fo
Sounds like 3D printing is the direction people are going for one-offs.
-- Original Message --
From: "Cameron Crum" <cc...@wispmon.com>
To: "af@afmug.com" <af@afmug.com>
Sent: 9/30/2016 2:02:06 PM
Subject: Re: [AFMUG] I want a "Stinger like"
er 30, 2016 10:40 AM
> *To:* af@afmug.com
> *Subject:* Re: [AFMUG] I want a "Stinger like" antenna for Wimax CPE
>
> Yup. They have an array of metal circles on a board connected to each
> other by traces.
>
> What about a cheaper external antenna? The price to b
ot;That One Guy /sarcasm" <thatoneguyst...@gmail.com>
To: "af@afmug.com" <af@afmug.com>
Sent: 9/30/2016 1:12:13 PM
Subject: Re: [AFMUG] I want a "Stinger like" antenna for Wimax CPE
the cambium 320 cpes just have sma inside, probably the same on the
telrads. whe
From: ch...@wbmfg.com
> To: af@afmug.com
> Sent: 9/30/2016 12:41:59 PM
> Subject: Re: [AFMUG] I want a "Stinger like" antenna for Wimax CPE
>
>
> The antenna is the easy part, the case and mounting are more difficult and
> expensive. Tooling alone for a new antenna ca
I hate Wimax.
-- Original Message --
From: ch...@wbmfg.com
To: af@afmug.com
Sent: 9/30/2016 12:41:59 PM
Subject: Re: [AFMUG] I want a "Stinger like" antenna for Wimax CPE
The antenna is the easy part, the case and mounting are more difficult
and expensive. Tooling alone
The antenna is the easy part, the case and mounting are more difficult and
expensive. Tooling alone for a new antenna case is easily $10K+.
From: Adam Moffett
Sent: Friday, September 30, 2016 10:40 AM
To: af@afmug.com
Subject: Re: [AFMUG] I want a "Stinger like" antenna for Wima
Yup. They have an array of metal circles on a board connected to each
other by traces.
What about a cheaper external antenna? The price to beat is $120.
-- Original Message --
From: ch...@wbmfg.com
To: af@afmug.com
Sent: 9/30/2016 12:37:35 PM
Subject: Re: [AFMUG] I want a "St
The external antenna version is the exact same housing, but with a pair
of N connectors protruding on the side opposite from the cable glands.
-- Original Message --
From: "Adam Moffett" <dmmoff...@gmail.com>
To: af@afmug.com
Sent: 9/30/2016 12:34:57 PM
Subject: Re
Yeah, that will be an array of patches inside. Hard to couple to with any
efficiency.
From: Adam Moffett
Sent: Friday, September 30, 2016 10:34 AM
To: af@afmug.com
Subject: Re: [AFMUG] I want a "Stinger like" antenna for Wimax CPE
Like a 45 slant 15dbi panel.
a 10"
I don't have the know-how required.
-- Original Message --
From: "Josh Reynolds" <j...@kyneticwifi.com>
To: af@afmug.com
Sent: 9/30/2016 12:32:13 PM
Subject: Re: [AFMUG] I want a "Stinger like" antenna for Wimax CPE
Make one?
On Sep 30, 2016 11:29
Like a 45 slant 15dbi panel.
a 10" x 10" diamond with flattened corners.
-- Original Message --
From: ch...@wbmfg.com
To: "Animal Farm" <af@afmug.com>
Sent: 9/30/2016 12:33:37 PM
Subject: Re: [AFMUG] I want a "Stinger like" antenna for Wimax CPE
Wha
What does the CPE look like?
From: Adam Moffett
Sent: Friday, September 30, 2016 10:29 AM
To: Animal Farm
Subject: [AFMUG] I want a "Stinger like" antenna for Wimax CPE
I want to narrow the radiation pattern on Wimax CPE in order to reduce
interference. Higher gain is a bonus, bu
Make one?
On Sep 30, 2016 11:29 AM, "Adam Moffett" wrote:
> I want to narrow the radiation pattern on Wimax CPE in order to reduce
> interference. Higher gain is a bonus, but mostly I want to tune out
> interference from other base stations and thereby improve CINR.
>
>
I want to narrow the radiation pattern on Wimax CPE in order to reduce
interference. Higher gain is a bonus, but mostly I want to tune out
interference from other base stations and thereby improve CINR.
Right now all I've got is I can put an external antenna on with coax
jumpers. A dish
it was in robitic voice saying "I. Want. To. Play. A. Game."
On 5/19/2016 5:42 AM, Forrest Christian (List Account) wrote:
Which game?
Global thermonuclear war?
or was it a Nice Game of Chess?
On Wed, May 18, 2016 at 4:15 PM, Chris Wright
yay
- Original Message -
From: Chris Wright
To: af@afmug.com
Sent: Wednesday, May 18, 2016 5:53 PM
Subject: Re: [AFMUG] I want to play a game
Chris Wright
Network Administrator
Velociter Wireless
209-838-1221 x115
From: Af [mailto:af-boun
: Re: [AFMUG] I want to play a game
g pro!
- Original Message -
From: Mathew Howard<mailto:mhoward...@gmail.com>
To: af<mailto:af@afmug.com>
Sent: Wednesday, May 18, 2016 5:23 PM
Subject: Re: [AFMUG] I want to play a game
Well, the discussion of conductivity came from
g pro!
- Original Message -
From: Mathew Howard
To: af
Sent: Wednesday, May 18, 2016 5:23 PM
Subject: Re: [AFMUG] I want to play a game
Well, the discussion of conductivity came from a discussion of fiat currency
(a perfectly logical progression :P)... but how we
Something about Nixon...
From: Mathew Howard
Sent: Wednesday, May 18, 2016 4:23 PM
To: af
Subject: Re: [AFMUG] I want to play a game
Well, the discussion of conductivity came from a discussion of fiat currency (a
perfectly logical progression :P)... but how we got onto that subject I
Well, the discussion of conductivity came from a discussion of fiat
currency (a perfectly logical progression :P)... but how we got onto that
subject I couldn't say
On Wed, May 18, 2016 at 5:15 PM, Chris Wright wrote:
> Quick everyone! Without looking, what was the original
Quick everyone! Without looking, what was the original topic of this thread?
:D
Chris Wright
Network Administrator
Velociter Wireless
209-838-1221 x115
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Joshaven Mailing Lists
Sent: Wednesday, May 18, 2016 1:40 PM
To: af@afmug.com
Subject: Re:
52 matches
Mail list logo