If you have tried to align a 900 MHz yagi, you know just a piece of metal or
your hand within a foot or so will affect its performance. I assume putting
the cross pol elements on the same boom avoids that issue.
-Original Message-
From: Wireless Administrator
Sent: Wednesday, Februa
When this has been discussed before, it only works if one path is really short.
You add the antenna gains and the free space loss of both paths. If both legs
have FSL on the order of 100 dB, you are not going to make it up with antenna
gain.
The huge billboard style passive reflectors are a d
It’s easy enough to run the numbers. 5 GHz FSL at 1 mile is about 112 dB.
Let’s say the combined gain of the 2 ft dishes plus coax loss is about 56 dB.
So if I’m doing that right, it’s a net loss of 56 dB. (I’m not 100% sure the
antenna gain in dBi is the right number to use.)
FSL at 300 fe
They may be using browser cookies to remember your login info, do you have
cookies disabled?
From: Josh Luthman
Sent: Wednesday, February 17, 2016 1:17 PM
To: af@afmug.com
Subject: Re: [AFMUG] Just got the biggest laugh
Autofill garbage in it...
Josh Luthman
Office: 937-552-2340
Direct: 937-
OK, josh imaginarynetworksllc com.
From: Josh Luthman
Sent: Wednesday, February 17, 2016 2:32 PM
To: af@afmug.com
Subject: Re: [AFMUG] Mikrotik 2011 vs 3011
i have!!!
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Wed, Feb 17, 2016 at 3:17
3
On Wed, Feb 17, 2016 at 3:47 PM, Ken Hohhof wrote:
OK, josh imaginarynetworksllc com.
From: Josh Luthman
Sent: Wednesday, February 17, 2016 2:32 PM
To: af@afmug.com
Subject: Re: [AFMUG] Mikrotik 2011 vs 3011
i have!!!
Josh Luthman
Office: 937-552-2340
Direct: 937-552
?
Syncbox is timing port sync. What are you powering these from?
From: Craig House
Sent: Wednesday, February 17, 2016 3:37 PM
To: af@afmug.com
Subject: Re: [AFMUG] Sync box 12's losing sync
I have checked the GPS statistics screen and the number of tracked and the
number of visib
25 locations. Only 2 or 3 are
having this issue
Craig
------------
From: "Ken Hohhof"
To: af@afmug.com
Sent: Wednesday, February 17, 2016 3:46:46 PM
Subject: Re: [AFMUG] Sync box 12's losing sync
Also trying to get a good signal in the far reaches of some houses can be a lot
more challenging at 5 GHz than 2.4 GHz.
From: Eric Kuhnke
Sent: Wednesday, February 17, 2016 7:03 PM
To: af@afmug.com
Subject: Re: [AFMUG] Cambium 450i 900Mhz
Until customers complain their stuff doesn't work, a lo
Behalf Of Ken Hohhof
Sent: Wednesday, February 17, 2016 6:15 PM
To: af@afmug.com
Subject: Re: [AFMUG] Cambium 450i 900Mhz
Also trying to get a good signal in the far reaches of some houses can be a lot
more challenging at 5 GHz than 2.4 GHz.
From: Eric Kuhnke
Sent: Wednesday, February 17
Very poetic.
From: Josh Luthman
Sent: Wednesday, February 17, 2016 8:37 PM
To: af@afmug.com
Subject: Re: [AFMUG] Cambium 450i 900Mhz
No I mean they're on the back of a turtle who only has one flipper left and
blind in one eye. Still no ETA.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2
We do that at a tower for a ham club voice repeater, they never use much
bandwidth, nowhere near 20x20, not even 1M.
They are doing something different, or more likely just don't know how much
they need, or are just asking for the sky because why not?
-Original Message-
From: Jerry
Yeah, the new Pope is pretty cool. We need a Jesuit to run for President, too
bad requirement #1 for that job is a gigantic ego.
From: Chuck McCown
Sent: Thursday, February 18, 2016 8:42 AM
To: af@afmug.com
Subject: Re: [AFMUG] OT. Cd. Juarez was exceptional today
Yeah, even non Catholics adm
that I give money to buy
that is separate from my operations.
On Thu, Feb 18, 2016, 8:34 AM Ken Hohhof wrote:
We do that at a tower for a ham club voice repeater, they never use much
bandwidth, nowhere near 20x20, not even 1M.
They are doing something different, or more likely just don
In normal operation they take 16-18 watts, maybe a little less on short
cables. I think 0.35 amps at 48 volts would be cutting it too close. The
Motorola POE at 56V and 0.8A is probably overkill though, 0.5A would
probably be good, and a 24W POE should be easy to find. Or with proper
pinout
#x27;t know much about it though.
Ken Hohhof wrote:
We do that at a tower for a ham club voice repeater, they never use much
bandwidth, nowhere near 20x20, not even 1M.
They are doing something different, or more likely just don't know how
much they need, or are just asking for the sky bec
.. ..
-Original Message-
From: Ken Hohhof
Sent: Thursday, February 18, 2016 9:39 AM
To: af@afmug.com
Subject: Re: [AFMUG] HAMSs and Internet
It is all radio-to-radio voice, but they link the repeater nodes together
via VoIP, so you can talk to someone on a different node. Similar to
digital
I know that telcos used to provide STL service over T1 using “Program Channel
Units” in a D4 channel bank. AM links were typically 5 kHz channel units
occupying 2 slots (128 kbps), FM links were typically 15 kHz channel units
occupying 6 slots (384 kbps), double that for stereo.
From: Chuck Mc
Unlike 2-way audio, I assume some delay is acceptable on broadcast links? If
so, this would allow for deep jitter buffers and even error correction for more
robustness over the Internet. Assuming the encoder/decoder equipment has this
ability.
Of course, the future is probably that everyone l
need em
http://www.roc-noc.com/mikrotik/routerboard/RB3011UiAS-RM.html
Erich Kaiser
North Central Tower
er...@northcentraltower.com
Office: 630-621-4804
Cell: 630-777-9291
On Tue, Feb 16, 2016 at 10:56 PM, Ken Hohhof wrote:
And who actually has 3011 in stock?
From: Erich Kaiser
Sent
Two people have inquired on Mikrotik Forums, no answer so far.
-Original Message-
From: Josh Reynolds
Sent: Thursday, February 18, 2016 4:53 PM
To: af@afmug.com
Subject: Re: [AFMUG] update and patch your linux servers, people!
#oldnews
Another thing you want to do is limit inbound dn
It may be a myth that they spend a fortune "maintaining" the copper. From
what I see, when the pedestals in the ROW get knocked over, they put an
orange garbage bag over it. That's about the extent of the maintenance
around here.
If the cable gets cut by a backhoe, or a pole gets knocked ove
I have seen WISPs advertise a different service called something like “hotspot
service” only available in town, so they can compete with cable.
From: Sean Heskett
Sent: Thursday, February 18, 2016 5:46 PM
To: af@afmug.com
Subject: Re: [AFMUG] location based pricing on website
Why bother???
W
OK, at the risk of exposing my ignorance, is it sufficient to update glibc
(I see that yum-cron has already done this for me), and perhaps to restart
some services like named? Or is glibc compiled into packages like BIND and
those need to be updated?
I'm thinking the glibc libraries are not c
Remember Carlos Mencia and 1-800-GET-A-YOB?
From: ch...@wbmfg.com
Sent: Thursday, February 18, 2016 7:44 PM
To: af
Subject: Re: [AFMUG] HR Services
Personally, I would hire only hispanics if I had that option...
From: Forrest Christian (List Account)
Sent: Thursday, February 18, 2016 6:00 PM
old' glibc in memory:
lsof +c0 -d DEL | awk 'NR==1 || /libc-/ {print $2,$1,$4,$NF}' | column -t
Josh
On Thu, Feb 18, 2016 at 9:00 PM, Ken Hohhof wrote:
OK, at the risk of exposing my ignorance, is it sufficient to update glibc (I
see that yum-cron has already done this for me), an
I like “my iPhone lied for me”.
From: Jaime Solorza
Sent: Thursday, February 18, 2016 8:10 PM
To: Animal Farm
Subject: Re: [AFMUG] HR Services
Strange I think Mencia is an idiot...Fluffy is funnier...
On Feb 18, 2016 7:07 PM, "Ken Hohhof" wrote:
Remember Carlos Mencia and 1
The big guys would probably do it with fees. Like UPS has a residential
address surcharge and a remote area surcharge, both of which apply to most of
my customers. But that doesn’t answer how to automate it.
The Rise Broadband website asks for your address before showing prices, but my
impres
lf Of Ken Hohhof
Sent: Thursday, February 18, 2016 9:00 PM
To: af@afmug.com
Subject: Re: [AFMUG] update and patch your linux servers, people!
OK, at the risk of exposing my ignorance, is it sufficient to update glibc
(I see that yum-cron has already done this for me), and perhaps to restart
Something that has struck me working with some local ham radio clubs is not all
of these guys know what they are talking about, or follow all the rules,
especially when it comes to things like WiFi. They love cheap shiny crap like
everyone else. At first some of them were kind of arrogant, but
Do. Or do not. There is no try.
https://www.youtube.com/watch?v=BQ4yd2W50No
From: Darin Steffl
Sent: Friday, February 19, 2016 9:45 AM
To: af@afmug.com
Subject: [AFMUG] cnPilot Try-Fi Promo??
http://www.cambiumnetworks.com/news-events/cnpilot-try-fi/
Anyone know what this is?
--
Darin
White. When ex Col. Coleman spoke about security some
of these guys said ISIS had training camp in Chihuahua! Ha...right out wacko
right wing talk shows. I was taught to respect my elders so I just listened.
On Feb 19, 2016 8:36 AM, "Ken Hohhof" wrote:
Something that has
Systems Architect
915-861-1390
On Fri, Feb 19, 2016 at 10:03 AM, Ken Hohhof wrote:
Yoga mats.
From: Chuck McCown
Sent: Friday, February 19, 2016 10:02 AM
To: af@afmug.com
Subject: Re: [AFMUG] HAMSs and Internet
I know a border patrol agent, pretty right wing, he claims they are
As someone mentioned, 200SS is a DC protector, you are thinking of 300SS.
-Original Message-
From: ch...@wbmfg.com
Sent: Friday, February 19, 2016 4:37 PM
To: af@afmug.com
Subject: Re: [AFMUG] Scooby Doo Mystery Short Circuit
The reason I got into the surge suppressor business in the f
I didn’t think the deadline had arrived yet, and that the next step would be
for Apple to present their arguments to the court.
Also I thought it was an older iPhone and what the govt wanted was for Apple to
bypass the time delay between PIN tries and bricking the phone after 10 wrong
tries, an
Any chance you can replace the glass with Plexiglas/Lucite or polycarbonate?
From: Christopher Gray
Sent: Friday, February 19, 2016 9:37 PM
To: af@afmug.com
Subject: [AFMUG] Antennas Behind Wood or Glass in Old Building?
I may have an opportunity to install some radios inside a steeple with so
Works for me.
From: Josh Reynolds
Sent: Saturday, February 20, 2016 3:20 AM
To: af@afmug.com
Subject: Re: [AFMUG] mercury net
It's up here, just checked.
On Feb 20, 2016 3:16 AM, "Stefan Englhardt" wrote:
http://mercurynets.com/ (sold out wimax part of purewave) is down for 2 days
now. Ar
ponse.
On Fri, Feb 19, 2016 at 10:57 PM, Ken Hohhof wrote:
Any chance you can replace the glass with Plexiglas/Lucite or polycarbonate?
From: Christopher Gray
Sent: Friday, February 19, 2016 9:37 PM
To: af@afmug.com
Subject: [AFMUG] Antennas Behind
I remember when my kids were young and would walk the 4 blocks to town we would
just make sure they had change for the payphone. It’s kind of sad that now you
have to get 10 year olds a cellphone. Of course now the neighbors would
probably report you to the police for letting your kids walk to
Terrible at reward assessment also.
We buy lottery tickets, but won’t contribute to a 401K with 100% company match.
From: Adam Moffett
Sent: Saturday, February 20, 2016 11:50 AM
To: af@afmug.com
Subject: Re: [AFMUG] OT Apple
Yeah it's a real psychological phenomenon. We (humans) are terrible
My son gets his news from The Young Turks:
https://www.youtube.com/channel/UC1yBKRuGpC1tSM73A0ZjYjQ
Their most recent comments on Anderson Cooper’s job moderating the town hall
reminds us that media companies are big corporations and don’t really care
about ideology, they care about their bottom
What has worked for me in the past (and I need to do now) is to work through
lunch (and don’t eat before bed). Seems easier in summer, more stuff to do,
and heat makes me more thirsty than hungry. If you eat a big lunch on a hot
day, you want a siesta.
Stress makes me eat. I used to work clo
Go clubbing at 6am:
http://www.nbcnews.com/business/consumer/strangers-dancing-talking-while-sober-hot-new-party-trend-n516646
From: Colin Stanners
Sent: Sunday, February 21, 2016 10:07 AM
To: af@afmug.com
Subject: Re: [AFMUG] OT medifast
Can you change your schedule to put in 1hr of exercis
Running 6.32.2 since that's the latest bugfix load for ARM, and it's what
came loaded on the router.
If I plug into any of ports 6-10, the interface keeps going up/down/up/down
every few seconds. Ports 1-5 no problems. I am confused, supposedly both
switch groups use the same model of switch
u could also
try 6.35-rc12. There's nothing in any changelogs about it, but MikroTik
is notorious for fixing/breaking stuff and not telling anybody.
On 2/21/2016 7:08 PM, Ken Hohhof wrote:
Running 6.32.2 since that's the latest bugfix load for ARM, and it's what
came loaded on t
at only in some routers? All the ones that we have that have switch
groups allow me to set a master port.
bp
On 2/21/2016 5:45 PM, Ken Hohhof wrote:
It's kind of annoying that you have to do some things from the CLI because
they aren't supported or are broken in Winbox and Webmin. Like
n the download page for ARM under current. I would try
that.
On 2/21/2016 7:45 PM, Ken Hohhof wrote:
Actually 6.32.2. There is no 6.32.4 listed for ARM on the download page.
I was trying to be conservative and go with "bugfix" not "current". I was
going to use these for a
I believe that is all correct, subject to the new OOBE rules though.
From: Craig Schmaderer
Sent: Tuesday, February 23, 2016 8:47 AM
To: af@afmug.com
Subject: [AFMUG] 5150-5250 rules
I know its been talked about a bit, but is this band have no dfs on the 450i?
I have been told it has similar
Yeah, I have seen cardboard parts bins for sale, I get plastic parts bins at
Rural King. But if you use the Cambium CLIPs, I find the cardboard boxes are
good for storing parts if you cut off the top.
From: That One Guy /sarcasm
Sent: Tuesday, February 23, 2016 10:44 AM
To: af@afmug.com
Subj
I have not bought Chuck’s version, but I have used KPP and L-Com which I assume
to be the same. IMHO the performance is underwhelming, and if you pull the
guts out, they look unimpressive. Actually I had lightning blow the top off
one so I got to look inside. At least I assume it was lightnin
. It's pretty obvious when you can rotate it while watching some SMs and
see the V/H ratio change. We'd be better off having a little less gain with a
more uniform pattern.
On 2/23/2016 1:43 PM, Ken Hohhof wrote:
I have not bought Chuck’s version, but I have used KPP and L-Com which I
Lock them in a room and slide pizzas under the door.
From: Brian Sullivan
Sent: Tuesday, February 23, 2016 3:44 PM
To: af@afmug.com
Subject: Re: [AFMUG] 14.1.1?
I heard there is a group of Cambium guys slaving away on this. Working late
hours too!
On 2/23/2016 3:22 PM, Sam Lambie wrote:
6 at 2:54 PM, Ken Hohhof wrote:
Lock them in a room and slide pizzas under the door.
From: Brian Sullivan
Sent: Tuesday, February 23, 2016 3:44 PM
To: af@afmug.com
Subject: Re: [AFMUG] 14.1.1?
I heard there is a group of Cambium guys slaving away on this. Working late
hours
I know nothing about the salon industry. The little I can offer from my
experience in the WISP industry you probably already know, but here goes anyway.
I assume they are renting the space from a third party, can you assume the
lease? Will the rent stay the same? Go up? Can you negotiate it
strikes seem to be near misses
that hit something and go up the tower.
From: Ken Hohhof
Sent: Tuesday, February 23, 2016 1:58 PM
To: af@afmug.com
Subject: Re: [AFMUG] 5GHz dual polarity omni
One thing I’ll say about the N connectors is they make it easy to screw a
Polyphaser directly to each
Why do I have a mental picture of Edward Scissorhands?
From: Chuck McCown
Sent: Tuesday, February 23, 2016 8:57 PM
To: af@afmug.com
Subject: Re: [AFMUG] Ot buying a salon
OK, the main take-away seems that have wanted to be a hairdresser since you
were five...
From: That One Guy /sarcasm
Sent
I guess the salon would be a great advertising vehicle for the WISP.
From: Keefe John
Sent: Wednesday, February 24, 2016 9:10 AM
To: af@afmug.com
Subject: Re: [AFMUG] Ot buying a salon
You could talk to Dave @ Mercury Network(the ISP). He owns salons in addition
to his WISP.
Keefe
On 2/24/
Years ago, I got my hair cut at a place where the owner was a barber with one
chair in the back of the building with a separate entrance, the front was a
salon like you describe. In the back the waiting room had sofas and Playboys
and booze. Probably not a bad idea, except if a guy gets his ha
“That One Church”
From: Sean Heskett
Sent: Wednesday, February 24, 2016 11:35 AM
To: af@afmug.com
Subject: Re: [AFMUG] Ot buying a salon
HA! that's the best advice ever Chuck :-)
here's a "how to" from john oliver https://www.youtube.com/watch?v=7y1xJAVZxXg
On Wed, Feb 24, 2016 at 10:29 AM,
H, I thought they were aluminum, and what went bad was the fiberglass
tape falling apart due to sun and wind. Maybe they are steel. So much for
the one I've had behind the door for 5 or 6 years saving it for a trip to
the recycler. It is used but looks in good shape, not sure I can still
Probably like the farmers here that do their own electrical work rather than
pay an electrician. Some do really nice work. Then there are the other 95%.
My installer will say “there was an outlet there for the POE, but it was
farmerized”. So maybe loose wires not in conduit, neutral used as
So be an Uber driver?
http://dilbert.com/strip/2016-02-25
-Original Message-
From: Seth Mattinen
Sent: Thursday, February 25, 2016 10:34 AM
To: af@afmug.com
Subject: Re: [AFMUG] Ot buying a salon
On 2/25/16 07:24, Travis Johnson wrote:
This sounds like a great little small busines
On Wed, Feb 24, 2016 at 11:36 AM, Ken Hohhof wrote:
Years ago, I got my hair cut at a place where the owner was a
barber with one chair in the back of the building with a separate entrance, the
front was a salon like you describe. In the back the waiting room had sofas
an
So we need a stencil and spray paint to mark our concrete blocks now?
-Original Message-
From: Caleb Knauer
Sent: Thursday, February 25, 2016 4:29 PM
To: af@afmug.com
Subject: Re: [AFMUG] Simple to make
Less chance of a satellite installer or other nefarious character
stealing your blo
That’s a 6x8x16 hollow block. I get 4x8x16 solid blocks from Menards, I think
they are 34 lbs. 115 lbs per cu ft. Your gravel number works out to 93 lbs
per cu ft.
From: That One Guy /sarcasm
Sent: Thursday, February 25, 2016 4:56 PM
To: af@afmug.com
Subject: Re: [AFMUG] Simple to make
6'
What, to build Trump’s wall?
From: Jaime Solorza
Sent: Thursday, February 25, 2016 5:03 PM
To: Animal Farm
Subject: Re: [AFMUG] Simple to make
Doesn't work...they take them anyway
On Feb 25, 2016 3:32 PM, "Ken Hohhof" wrote:
So we need a stencil and spray paint to ma
Most of the hams I have encountered around here are either (a) way too old to
have a day job at Jiffy Lube, or (b) their day job is for government emergency
services anyway. I suppose my experience may be atypical.
From: Lewis Bergman
Sent: Friday, February 26, 2016 6:50 AM
To: af@afmug.com
technical nature doesn't appeal to the younger
crowd. Maybe it is to difficult, I don't know. Most around here make time, but
that is a bit different. A guy who is on an ambulatory shift can't exactly bail
on that too go work on a repeater.
On Fri, Feb 26, 2016, 9:03 AM Ken Hohhof wr
to the younger
crowd. Maybe it is to difficult, I don't know. Most around here make time, but
that is a bit different. A guy who is on an ambulatory shift can't exactly bail
on that too go work on a repeater.
On Fri, Feb 26, 2016, 9:03 AM Ken Hohhof wrote:
Most of the hams I hav
When did they go up there? Was it before U-NII-1 was opened up? Maybe you can
argue that is a separate band, since it wasn’t even available when they located
there.
It is common for a lease to specify exclusivity on that tower for certain
unlicensed bands, or to contain a non-interference cla
Isn’t their complaint about the expedited make ready process allowing third
parties to move AT&T equipment and lines to make room, rather than waiting 6
months for AT&T to move it themselves? Also I think it says AT&T owns
something like 40% of the poles, not sure that really matters.
From: C
enses or bands that
were auctioned) does not grant “exclusive use” of a frequency at a location.
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Ken Hohhof
Sent: Friday, February 26, 2016 11:32 AM
To: af@afmug.com
Subject: Re: [AFMUG] Unl
Those of you who are using the 450d, what do you like about it and where do
you use it?
I'm looking for reasons other than "I hate reflector dishes".
This may sound obvious, but have you tried Bud?
http://www.budind.com/customize.shtml
I remember when any small electronics enclosure was called a “Bud box”.
From: Forrest Christian (List Account)
Sent: Saturday, February 27, 2016 10:44 PM
To: af
Subject: Re: [AFMUG] racmount kit for Packetflu
Maybe check with Brian Vargyas at Baltic Networks (Maxxwave) and see who makes
their aftermarket MikroTik cases for them? Probably getting them from China,
but at one time, Chicago was home to a million custom metal fabricators.
Suburbs like Addison had whole industrial parks full of them, not
Mmmm, pistol whip.
https://www.youtube.com/watch?v=fH185Hn38m8
OK, I’m guessing that wasn’t what you had in mind?
From: George Skorup
Sent: Sunday, February 28, 2016 8:11 PM
To: af@afmug.com
Subject: Re: [AFMUG] Mikrotik OSPF route selection oddness
I think you said it best...
"sometimes Rou
No, I think you want this:
http://store.packetflux.com/din-rail-mounting-kit-for-rev-h-i-syncinjectors/
The thing you linked to is essentially a tiny piece of plastic DIN rail for
wallmounting stuff that is already DIN rail mountable.
Also note the DIN rail mounting kit for Syncinjectors can be
screwdriver can be placed in
the hole on the bottom of the din clip and the bottom of the syncinjector can
be used as a fulcrum point to enable easy removal of the clip from the din
rail.
On Feb 29, 2016 9:02 AM, "Ken Hohhof" wrote:
No, I think you want this:
http://store.packetfl
Unfortunately it is cheaper to buy a used Advantage AP than upgrade the one you
have. (Not accounting for labor costs to climb and replace.)
Hard to believe though that anyone ever bought a non-Advantage AP.
From: John Woodfield
Sent: Monday, February 29, 2016 3:54 PM
To: af@afmug.com
Subjec
What Chuck is talking about would I guess be similar to this:
http://alphaantennas.com/products/small-cells/aw3464/
I’d hate to see that thing twice as big.
From: Eric Kuhnke
Sent: Monday, February 29, 2016 3:57 PM
To: af@afmug.com
Subject: Re: [AFMUG] Laird ODH9-9 or Alternative
I'm imaginin
ls on
the sectors and a 5mhz on the omni. We try and have redundancy on every AP and
backhaul I just have not settled on a good way to do it with the 450i 900 yet.
Best regards,
Brandon Yuchasz
GogebicRange.net
www.gogebicrange.net
From: Af [mailto:af-boun...@afmug.com] On Beh
And “patron saint of bikeshedding”.
From: John Woodfield
Sent: Tuesday, March 01, 2016 9:27 AM
To: af@afmug.com
Subject: Re: [AFMUG] OT - Part-15.org
Ahh Brett Glass, the father of all WISPs lol
John Woodfield, President
Delmarva WiFi Inc.
410-870-WiFi
-Original Message-
Fro
Drumpf.
https://chrome.google.com/webstore/detail/drumpfinator/hcimhbfpiofdihhdnofbdlhjcmjopilp
From: Bill Prince
Sent: Tuesday, March 01, 2016 9:31 AM
To: af@afmug.com
Subject: Re: [AFMUG] hahahaha - omg, how have i missed this
Maybe funnier.
bp
On 2/27/2016 8:02 PM, CBB - Jay Fuller w
I don’t think there is any chip. Unless you mean the transformers.
From: Nate Burke
Sent: Tuesday, March 01, 2016 10:18 AM
To: af@afmug.com
Subject: Re: [AFMUG] GIGE-APC with FSK Radios
Ok, just wanted to make sure the chip that inserted the power didn't need to
have a matching gigabit chip
Time to buy an RF suit? Don’t forget the RF socks.
http://www.rfsafetysolutions.com/RF%20Radiation%20Pages/RF_Protective_Garments.html
From: That One Guy /sarcasm
Sent: Tuesday, March 01, 2016 6:01 PM
To: af@afmug.com
Subject: Re: [AFMUG] Safe or Not - Working Near Mobile Phone Systems
Yeah,
Or watching Netflix because there's nothing on TV except election coverage?
Lots of bandwidth usage for a Tuesday.
I think I have a couple Ultra 5 pizza boxes here slated for the recycler, if
anyone wants one for their museum. Also I think there's a DS10L AlphaServer
if anyone misses OpenVMS.
-Original Message-
From: Josh Reynolds
Sent: Wednesday, March 02, 2016 3:41 PM
To: af@afmug.com
Subject:
Article says very high gain antenna with beamwidth less than half a degree and
that actual transmit power is only half a watt. I shouldn’t do math in my
head, but that would be something like 53 dBi antenna gain to get from 0.5
watts to 1E5 watts EIRP? At 80 GHz that seems feasible without the
You’re probably one of those people who take the toilets and the porch light
when you leave.
From: That One Guy /sarcasm
Sent: Wednesday, March 02, 2016 9:14 PM
To: af@afmug.com
Subject: Re: [AFMUG] Fixed Point to Point Microwave Stations License
Requirements- Hypothetical
All that matters is
Is he the guy referred to as the Donald Trump of Canada?
From: Paul Stewart
Sent: Thursday, March 03, 2016 10:58 AM
To: af@afmug.com
Subject: Re: [AFMUG] Forbes article
Haha…. Good guy! His cottage is about 90 minutes from where I live … have met
him twice – very interesting guy to talk too…
Some small steps:
http://news.walgreens.com/press-releases/general-news/walgreens-leads-fight-against-prescription-drug-abuse-with-new-programs-to-help-curb-misuse-of-medications-and-the-rise-in-overdose-deaths.htm
The availability of naloxone over the counter may prevent some OD deaths but of
co
Yet they told the FCC that county level licenses would be too small.
From: Jason McKemie
Sent: Thursday, March 03, 2016 8:43 PM
To: af@afmug.com
Subject: Re: [AFMUG] Verizon argues for combining 37 GHz, 39 GHz into single
band for 5G - FierceWirelessTech
I'm still not sure how they're planning
Where did you see this? “POP” in the spectrum licensing context usually means
population covered, as in the price is $X per MHZ-POP
From: Josh Reynolds
Sent: Thursday, March 03, 2016 8:49 PM
To: af@afmug.com
Subject: Re: [AFMUG] Verizon argues for combining 37 GHz, 39 GHz into single
band for
I miss Sleepy Ben. “Can somebody attack me please” is my favorite quote from
the debates. But no, I’m not watching the debate. Marla Maples will be on
Dancing With The Stars though. >From the photos, apparently she has taken good
care of herself.
From: Rory Conaway
Sent: Thursday, March 03
So back to Trump defending his manhood. I kept imagining the scene from A Few
Good Men, Rubio should have played Tom Cruise to Trump’s Jack Nicholson.
So Donald, you’re sensitive about your hands. I’m making you angry. Now
imagine you’re the President, and there’s a red button on your podium
Does anyone know what Internet speed should be expected on a Verizon Network
Extender For Business?
I thought these were only 3G and mainly for voice, assuming if you really
cared about data you would just connect directly to WiFi. I remember when
my smartphone speeds used to top out around 1
won't use the femtocell for data.
On Fri, Mar 4, 2016 at 9:38 AM Josh Luthman wrote:
I know mine worked on 4x1
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Mar 4, 2016 10:37 AM, "Ken Hohhof" wrote:
Does a
@afmug.com
Subject: Re: [AFMUG] Verizon network extender data speed
I don't think you can use data over it. What model is it?
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Mar 4, 2016 11:18 AM, "Ken Hohhof" wrote:
Not rea
BTW, is there any reason this list needs to be publicly searchable? Is that a
mandatory part of the hosting, or do people want it that way? Cuz everything
show up on Google in like milliseconds:
https://www.google.com/?gws_rd=ssl#q=could+just+be+that+a+guy+needs+a+garage+floor+drain+pit+dug+
Johnny Carson was not solely to blame, it started with a Republican Congressman:
http://www.snopes.com/radiotv/tv/carsontoiletpaper.asp
But those of you who weren’t even born yet in the 70’s, you don’t remember
waiting in lines to buy gas during the Arab oil embargo. I think Nixon was
President
901 - 1000 of 4475 matches
Mail list logo