quadrature of a signal (without adding the half
quantum of noise that comes from the so-called standard quantum limit for a
phase-preserving amplifier) can be used to improve astronomical interferometry.
If anyone has any ideas about that, please let me know.
Best,
Peter
From: "salmon.na via c
DC2X550-12? As I see the ADC chip
on ADC2X550-12 is :
1x TI ADS54RF63I , is this same with 2xADS54RF63?
Thanks!
Peter
At 2018-10-17 23:45:43, "Rick Raffanti" wrote:
The ADC2X550-12 is identical to the ADC portion of the "MKID_ADC_DAC", so if
someone has a yellowblock th
Dear All,
Is someone familiar with adc2x550-12 ?
Is there a yellow block of this kind of ADC for ROACH2 or SNAP platform?
Thanks!
Peter Niu
--
You received this message because you are subscribed to the Google Groups
"casper@lists.berkeley.edu" group.
To unsubscribe from this grou
Hi Adrian,
There’s an open-source TtD converter design available at OHWR that might be of
interest to you. The paper describing it is
http://arxiv.org/pdf/1303.6840v1.pdf and the repository is at
http://www.ohwr.org/projects/tdc-core/repository.
Cheers,
Peter
From: casper-boun
Hi,Jonathan
This is the problem,I am using a passive divider used for RF signals.
I also find a link in casper website:
https://casper.berkeley.edu/wiki/16_way_1PPS_driver
The 1pps is called for a special divider.I will find one.
Thanks for your help!
Peter
At 2015-01-30 10:29:48, "Jon
work in our
lab. (I thought the power divider need to be special) Do you have some good
suggestions?
Thanks for your help again!
Peter
bits/s )I don't know whether it is ok
for the transition capability of the 10Gbe NICs(10Gbits/s).
Could anyone help me please?
Thanks!
peter
find on the websites? Best
Regards! Peter -- 发自 Android 网易邮箱 On 2014-12-03 01:01 , David MacMahon Wrote:
Hi, Peter, If you have enough ports on the switch then you certainly can
configure things to send the packets directly from the ROACHs to the various X
boxes. The pre-built PAPER model will
when
I compiled,but bof file could not compiled.The matlab said it is a ADC block
problem.
Best wishes
Peter
netboot.
The file like this:
[peter@roachserver ~]$ file -L /srv/roach_boot/boot/uImage
/srv/roach_boot/boot/uImage: u-boot legacy uImage,
Linux-3.16.0-saska-03675-g1c70f, Linux/PowerPC, OS Kernel Image (gzip), 3034204
bytes, Tue Aug 26 14:54:14 2014, Load Address: 0x0070, Entry Point
/temp2_input
(No such file or directory)
hwmon: create hwsensor could not open /sys/bus/i2c/devices/0-0018/temp3_input
(No such file or directory)
...
I am not sure whether it is a bug error,Any way it doesn't influence the
netboot work.
Now the version got through telnet like this:
[pe
e the
uImage-r2borph3
In our PC, the information like this:
[peter@roachserver ~]$ file -L /srv/roach_boot/boot/uImage
/srv/roach_boot/boot/uImage: u-boot legacy uImage, Linux-3.7.0-rc2+,
Linux/PowerPC, OS Kernel Image (gzip), 2231485 bytes, Mon Nov 19 15:30:35 2012,
Load Address: 0x0050,
idn't turn it up to 250Mhz when I run PAPER model.
As the initialization shows:
[peter@roachserver rb_test]$ ./paper_feng_init.rb roach1:0 initializing roach1
as FID 0 connecting to roach1 roach1 roach2_fengine app/lib revision
47c59e2/cd26bd2 disabling network transmission setting roach
ich can seen on
https://casper.berkeley.edu/wiki/PAPER_Correlator_Manifest
I will try the counter to control the overflow,
Thanks for your warm help!
Best Regards!
peter
At 2014-10-21 23:37:10, "Kujawski, Joseph" wrote:
Peter,
At one point during my testing of this system, I
nswer!
Best Regards!
peter
At 2014-10-20 23:51:41, "Vertatschitsch, Laura E."
wrote:
Hey Peter,
I'm bumping this up to the listserve.
I am unfamiliar with PAPER. Perhaps someone with that project can help.
If you haven't yet, you should complete Tutorial 2 with y
caused by the frequency problem or the Tx buffer
size.
Thanks for your help!
Have a good night/day!
peter
At 2014-10-20 23:13:11, "Kujawski, Joseph" wrote:
Peter,
I am not sure if you are having the same problem that I was having, so I will
give you some pointers on the d
lem I guess.But
what's wrong with it?Can anyone give me some suggestions?
Thanks for your help!
peter
ding: T T T T T T T T T T
Retry count exceeded; starting again
It tells the loading problem,and star again and again .
Has anyone met this before?
Best Regards!
peter
hat the LEDs of power and the NIC on roach2 are
lighting,and the NIC‘s LED is also blinking!
Has anyone met the same problem like this?Hope for your help!
Best Regards!
peter niu
hi all,
Can someone tell me what is the use of the aux_sync_out ?This is the
aux_sync_out cable from J11 on the Roach2.The J10 is for the aux_sync_in,all
this from the all roach2s can be put into a sync singal like 1pps.But what is
the J11 use for?
Best regards!
peter
Hi, Dave,
your solution is perfectly useful! I have done it as you said just now,and
it works now,thank you very much!
peter
At 2014-08-29 00:28:48, "David MacMahon" wrote:
>Hi, Peter,
>
>Yes, sorry, the instructions for building/installing the Ruby components
hi all,
This is peter from NAOC,these days I come into trouble with the ruby
code.I have build a model for Tianlai project based on the PAPER's roach
model.Followed from[ https://casper.berkeley.edu/wiki/PAPER_Correlator_Manifest
],I have installed ruby and rubygems(V. 2.1.2)
x27;s probabley a problem of the version of your EDK.
good luck!
peter niu
At 2014-08-12 03:15:50, casper-requ...@lists.berkeley.edu wrote:
>Send casper mailing list submissions to
> casper@lists.berkeley.edu
>
>To subscribe or unsubscribe via the World Wide Web, visit
the data have the same
length but differnt contents.When I use python to configure the bof ,It comes
the correct result.
Thanks again for your care!
peter niu
At 2014-08-08 11:31:51, "peter" wrote:
hi all,
I faced a problem when I run the tut2a.bof of this tut2a.mdl whic
hi all,
I faced a problem when I run the tut2a.bof of this tut2a.mdl which I
build myself according to the tutorial2.There is some problem after I set all
the register through telnet and run it.I can receive the same length of data
with the sending.but the content is not correct.I at
t and thanks! Peter
--
Peter Timbie
Department of Physics
6209 Chamberlin Hall
1150 University Avenue
UW-Madison
Madison, WI 53706
608-890-2002 (office)
608-263-0361 (FAX)
http://cmb.physics.wisc.edu
Hi CASPERites,
This work might be of interest to some of you working on packetized
correlators.
Cheers,
Peter
From: ee-doctorate-boun...@lists.stanford.edu
[mailto:ee-doctorate-boun...@lists.stanford.edu] On Behalf Of Student
Services
Sent: Thursday, April 25, 2013 11:22 AM
To: ee
Hi all,
Im not involved with the summer school below, so I cant vouch for it, but
it looks like it might be of interest to some students in CASPER.
Cheers,
Peter
From: physgrad2-boun...@lists.stanford.edu
[mailto:physgrad2-boun...@lists.stanford.edu] On Behalf Of Maria Elizabeth
wiki
yet.
Thanks,
Peter
Hi everyone,
Has anyone ported KATCP for ROACH1 to MATLAB? If so, is the port freely
available?
Thanks,
Peter
of memory for
the ROACH? If so, which ones do you recommend? (For example, would this
work? http://www.newegg.com/Product/Product.aspx?Item=N82E16820139054 )
Thanks,
Peter
-Original Message-
From: Laura Spitler [mailto:laura.spit...@gmail.com]
Sent: Sunday, May 22, 2011 3:36 PM
To: pe
for the default DIMM modules that Digicom ships the boards
with?
Thanks in advance.
Cheers,
Peter
-Original Message-
From: Laura Spitler [mailto:laura.spit...@gmail.com]
Sent: Friday, May 20, 2011 11:40 AM
To: Peter
Cc: casper@lists.berkeley.edu
Subject: Re: [casper] Sample design for ROA
t
in BORPH over the CPU interface?
(I have seen Laura's DRAM demo design on the wiki, but as best I could tell
that was not set up for CPU interfacing.)
Thanks,
Peter
Message sent
using GamCo WebMail
uot;, etc.) that has nothing to do with the
correlator. The wrapper functions don't seem to have any dependencies within
corr, which was really convenient.
Cheers,
Peter
-Original Message-
From: Jason Manley [mailto:jasonman...@gmail.com]
Sent: Wednesday, April 27, 2011 3:21 AM
T
m the tar.gz at
http://pypi.python.org/pypi/corr, which suggested that it is "OS
Independent".
Unfortunately, when trying to execute this sample script, I get the
following error:
Traceback (most recent call last):
File "C:\LabControl\Peter\ROACH\adcsnap_updated.py&q
o recompile it,
rather than just use the existing "binary".)
Thanks,
Peter
Hi,
The on-board LEDs for ROACH 1 seem to be "mapped" to the "ROACH:led" GPIO
block in Simulink, with bits 0-3 valid choices.
What is the Simulink "mapping" for the LEDs that are connected to header
cables that lead to 8 LEDs on the front of t
binary data regardless of the machine the script is running on.
> -Terry
The astype() function can take care of that, though it is a bit less
convenient.
In [3]: str (numpy.ones (1).astype ('d').data)
Out[4]: '?\xf0\x00\x00\x00\x00\x00\x00'
Peter
--
Peter Williams / pwilli.
stion for some reason, it should be both
clearer and faster than going through struct.pack.
Cheers,
Peter
On Thu, 2011-01-06 at 16:44 -0500, Laura Spitler wrote:
> Hi Jon,
>
> To elaborate on Mark's suggestion, I include a python function I've
> written to do just what you're
more than a couple of weeks
who sees a variable named "i" inside of a loop instantly knows its
general purpose and behavior.
If Matlab's implementation makes it so that you can't safely use this
construct, you gotta do what you gotta do, but the problem is Matlab
Page 3 of Jason's switch memo at
http://casper.berkeley.edu/memos/switch_configuration.pdf has the commands
to enable jumbo frame on some of the Fujitsu switches.
Peter
-Original Message-
From: casper-boun...@lists.berkeley.edu
[mailto:casper-boun...@lists.berkeley.edu] On Behalf O
instrument, so I ended up just using an iADC card purely to clock the board,
which is a rather large waste.
Peter
-Original Message-
From: casper-boun...@lists.berkeley.edu
[mailto:casper-boun...@lists.berkeley.edu] On Behalf Of Andrew Siemion
Sent: Thursday, July 09, 2009 5:43 AM
To: Randy
hat you should try writing in the binary mode
because the ASCII mode is broken.
Cheers,
Peter
-Original Message-
From: casper-boun...@lists.berkeley.edu
[mailto:casper-boun...@lists.berkeley.edu] On Behalf Of Oren Milgrome
Sent: 20 August 2008 16:03 PM
To: casper@lists.berkeley.edu
Subje
d variable type though.
Peter
-Original Message-
From: casper-boun...@lists.berkeley.edu
[mailto:casper-boun...@lists.berkeley.edu] On Behalf Of Jason Manley
Sent: 31 March 2008 11:48 AM
To: John Ford
Cc: casper@lists.berkeley.edu
Subject: Re: [casper] borph interface question
Peter was h
44 matches
Mail list logo