At 04:47 PM 10/22/2000 +0800, cslx wrote:
I am assuming you are using a terminal server here? Try having this
in your config for your terminal server:
line con 0
exec-timeout 0 0
line 1 8
no exec
transport input all
V.
I use the line to connect with the
console of 2501 and the serial of the
Hi,
I'm facing a strange problem with my router (2621),I'have
two leased WAN links, 512 128 kbps.
ISP-1s0/0fa0/0
--|
|LAN1
||
ISP2 |
router|
--|
|LAN2
s0/1 fa0/1
IP address:
for s0/0: 100.x.x.1
for fa0/0 : 100.x.x33
for s0/1: 200.x.x.1
for
Hi all
Thanks for your answers
1) I asked for one of my friends who has an old version (HPOpenView with 100
nodes- it is a Window 9x version) I know that the name of the new product is
HPNNM and there are no problems with these routers. We tested it on demo
version from HP Site.
2) The routers
Title: RE: How to configure Callback in AS5800
If you have Windows NT 4.0 with RAS installed, you can configure the callback.
-Original Message-
From: Rocky Joe [mailto:[EMAIL PROTECTED]]
Sent: Tue, October 24, 2000 7:27 AM
To: [EMAIL PROTECTED]
Subject: Re: How to configure
I took Cvoice 2.0 (641-647) and CSPFF (9E0-559) beta exams on july 19,
august 1.
I got the score reports this week.
Cvoice 641-647800 (passing score 700)
CSPFF 9E0-559901 (passing score 769)
I do not have any official study material, all I have is to browse CCO
and studied any
Where is the best place to go for a practice lab or class for CCIE prep? Any comments
here?
V.
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Hi Guys,
I am trying to login to my profile at Galton with no success, it seems that
I forgot the password.
Anyway There is a Help saying
"If you have forgotten your password, you may be able to remember it by
clicking on the "Prompt" button on the previous page."
When I go to the previous
Thanks you all!! I got it...!! Thanks
-Original Message-
From: A. Geoffrey Cauchi [mailto:[EMAIL PROTECTED]]
Sent: Monday, October 23, 2000 11:24 PM
To: Sim, CT (Chee Tong); 'Cristi Piatnitchi'; [EMAIL PROTECTED]
Subject: Re: how to dial up to access server via DUN?? what is my
Is there a way to get the average utilization on an interface (serial) for more than
the default 5 minute period shown by show interfaces? Perhaps if there was a setting
to increase the time period used, or a command that would keep a running tally or even
a way to record the utilization in
try to use policy routing
int eth 0
ip addres x.x.x.x
ip policy route go-to-serial
route map go-to-serial 10 permit
match "what ever you want"
set interface s0
Sam LI
- Original Message -
From:
net974 at Yahoo
To: [EMAIL PROTECTED]
Sent: Tuesday, October 24,
Hi.. Dear all,
May I know how to set priority on certain type of traffic to pass thru
router? what is the syntax??
Tong
-Original Message-
From: Stull, Cory [mailto:[EMAIL PROTECTED]]
Sent: Monday, October 02, 2000 11:07 PM
To: 'c.garofalo'; [EMAIL PROTECTED]
Subject: RE: syslog
Hi all,
I am looking after a hetroganeous network of 16
routers and 20 leaseced lines. I am maintaining it
with management software of SNMPc ver 4.2.
since the connectivity is critical I am looking out
for some software which can initiate a event like
sending a mail to admin or paging the info
Hi Friends
I am trying to connect two 2501 routers via their AUX ports so that I can
simulate DDR.
Could someone send me the cable pinouts.
I spent quite a long time looking in the archieves but didnt find the info.
Please help .
Thanks
SV
_
FAQ, list
Please give me some opinion, and I would be appreciated if you cound help
me.
In the Boson Exam package,
the CCDA Test sometimes contains few Case Study question,
and I found that the question Exhibit and the Diagram description is very
long...
It would be a wasting of time if I read all the
Hi Friends
Can we configure a Cisco Routers to act as a Frame Relay Switch which
supports SVC's.
I want to try configuring Frame Relay SVC's and am wondering if I can
configure a Cisco Router to simulate Frame Relay SVC's.
Please let me know if anyone has tried out such a scenario.
Thanks
SV
I'm doing the CCNP track now for the next 6 months, but I'm looking ahead.
Assuming you've already had the usual ACRC/BSCN, CLSC/BCMSN, etc. which
course(s) would you take within the next 6 months if you wanted to get CCIE
in the future after completing CCNP:
cvoice, catm, or mscn? or perhaps
Cable Lengths may be out of spec. Try a Bert Tester if
you can.
Regards,
Phil.
--- "McCallum, Robert"
[EMAIL PROTECTED] wrote: phone
the carrier and get them to test their line.
If they say that it is
fine then check your g703 cables.
-Original Message-
From: Ramesh c
I think I remember one question on NSSA. Nothing in depth.
Brad Nixon
"Helena" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi,
Do we need to know about Not So Stubby Areas for the BSCN exam/
Thanks
Helena
_
FAQ, list
Folks,
I
need help, I have 3 2500 router and 1 2900 switch, I want to be able to route
between two vlans, I don't have a 100mb/s Ethernet interface on any of my
routers.
Questions:
1 There is a
100mb/s interface available for the 2500
2 If there
is not a 100mb/s for the 2500 then
Hi fellow CCIE candidate!
I have a RTP date for Feb 10 11 2001. If you have an earlier date (but
have to be on or after Nov 8, 30 day rule) and feel you need more time to
study please contact me if you are interested in swapping dates.
(973) 464-8237. 9am to 10pm
Thanks
-Erling
Hi fellow CCIE candidate!
I have a RTP date for Feb 10 11 2001. If you have an earlier date (but
have to be on or after Nov 8, 30 day rule) and feel you need more time to
study please contact me if you are interested in swapping dates.
(973) 464-8237. 9am to 10pm
Thanks
-Erling
Hi,can someone tell me where I can download a Switch simulator?
thanx a lot
waiting your response as soon as possible
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL
All,
Did anyone who took the Certification Zone CCIE written this month find
your scores really low? I'm taking the real exam in a couple weeks, but was
real disappointed to get a much lower (100 points less than my previous
worst) score this month. I'm hoping it was just the test.
I need sample questions on performance management as they appear in the CCIE
R/S qualification exam. Is there any one that can help me with this? FOR
THAT MATTER ANY SAMPLE QUESTIONS WILL DO.
Cheers
Ben de Nysschen
South Africa
+27 82 602 1227
_
FAQ, list
In a message dated 10/24/00 7:14:19 AM Eastern Daylight Time,
[EMAIL PROTECTED] writes:
Please give me some opinion, and I would be appreciated if you cound help
me.
In the Boson Exam package,
the CCDA Test sometimes contains few Case Study question,
and I found that the question
The cisco documentation has a few examples! Try this one.
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_v52/config/exa
mples.htm#xtocid274895
Vern Stitt
ASE, CCA, CCNA, MCSE
_
FAQ, list archives, and subscription info:
I had Win NT 4 Radius server up and running and using it with a 1605
configured for AAA. When I upgraded the box to W2K, the router will no
longer authenticate using the Radius server. Does anyone know why this
would be? I figured a simple upgrade shouldn't change anything since my
router
1.)Does anybody know where I can get a PLCC (Plastic leaded chip carrier) extraction
tool so I can replace the boot roms in some 2500's. Or is there another way of
removing them without damaging them?
2.) Cisco's website and their technical staff claim that the 4000M+ can only handle
8MB of
alternatively you can try clear ip bgp neigh addr
soft in /out to just update the bgp table and not
flush all of them
suaveguru
--- ElephantChild [EMAIL PROTECTED] wrote:
On Sun, 1 Oct 2000, whatshakin wrote:
clear ip bgp *
Don't do this on a production network during
business hours!
Hi all,
I need your input here.
I have 4 remote sites that are connected to HQ via FR as the primary WAN
connection.
I need to have ISDN DDR for all remote sites to HQ in case a FR circuit goes
down ...
On the BRI interface at HQ ... I only need 1 ip address right?
Can I get the HQ router to
I am working through Caslow's Bridges Router and Switches book and I am
trying to get a firm understanding of frame-relay.
I have generally recreated the lab on page 126 with the minor changes of
adding another router and changing addresses. For those without the book
(which is very good by the
hi Narri,
your router missing the IOS in flash memory, for you solve this problem, do you
load a new IOS
in flash memory and reload the router
Sorry my english is bad
regards,
Fernando Lima
- Original Message -
From:
md.
nazri
To: [EMAIL PROTECTED]
Sent: Monday,
Whatsup Gold is a pretty good program
Duck
- Original Message -
From: Study Cisco [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, October 23, 2000 11:22 PM
Subject: event firing
Hi all,
I am looking after a hetroganeous network of 16
routers and 20 leaseced lines. I am
There are no FE interfaces that are avaiable for
the 2500's.. if you want to route between the VLANs, the easiest way is to
connect a router to each VLAN via the Ethernet interface, connect those 2
routers together with a back-to-back DCE/DTE cable on the serial interfaces.
Enable a routing
Title: FW: Alicia Silverstone teaches Cisco router configurations
Didn't Know movie stars had time for this stuff
:-0http://routergod.com/aliciasilverstone/
Next time one of your customers asks for help on their cisco
setups :)
Greetings All
I have a 2511 with 4 MB of flash in it. I need to upgrade the IOS needs
7MB. I tried canabalizing another 2511 I had and adding it's 4MB to the 1st
routers 4MB making what I believed to be 8MB. But when I tried to tftp the
new image over I still got an error saying not enough
Priority Queueing..
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/qos_c
/qcpart2/qcpq.htm
(watch the word wrap on the url)
Hope that helps..
Russ..
""Sim, CT (Chee Tong)"" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi.. Dear all,
Group,
I have a Cisco 3548 XL with two VLANs on it (VLAN 1 and VLAN2).
Some of the ports on the switch are set to multaccess ports for access to
both VLANs. This setup works fine for about a day and then the computers on
these multaccess VLAN ports can not talk with the main VLAN1, but
Guys,
Have anyone of you tried copying IOS image on the
flash card in the PCMCIA slot in the laptop.
Instead of downloading the IOS and then doing TFTP on
the router.Is it not a good idea to copy direty to the
flash card on your laptop.Are their drivers availble
for flash card for Win
All,
Is it possible to set up NT or Linux as a
TACACSor RADIUS Server? If so where
can I get the appropriate software.
Thanks,Glenn
Ok at the risk of being flamed I will post this question. We have
implemented a VLSM and also have some subnets left over from our previous
config. We are having intermittent problems reaching hosts both within and
outside the vlsm. During troubleshooting if I ping a client by IP I get a
time
you can use "ip unnumbered". so you don't need any ip add. at serial
interfaces.
this is ISDN DDR http://www.cisco.com/warp/public/123/5.html
for extra issues use www.cisco.com/go/tools - tech central
this is a very helpful site for all cisco users.
Serhat ERKAN
Network Engineer
I need help in understanding inverse masks that are used in network access
list commands. I understabd what 0 and 255 do but I get confused when there
is any number other than these two. For example...
network 10.0.0.0 0.7.255.255 area 0
what does the 7 represent or specifiy for the mask.
The
2900 should do 10Mb/sec just fine.
Adam
Hickey
[EMAIL PROTECTED]
-Original Message-From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Juan BlancoSent:
Tuesday, October 24, 2000 4:39 AMTo:
[EMAIL PROTECTED]Subject: ISL Trunk on a
2500
Folks,
I
think they are better on the Linux server than the NT server. It is still
a projectI am trying to work on, but other things have come in the
way.
George
-Original Message-From: Glenn Flood
[mailto:[EMAIL PROTECTED]]Sent: Tuesday, October 24, 2000 4:18
PMTo: '[EMAIL
I should have added more info. All the clients are configured in our org
properly. Some clients are on diff subnets with diff masks, others are on
the same vlsm with its appropriate subnet mask. some stations ping the
clients while others cannot, however the clients can be ping'd from other
Yeah you can't place an IOS on two flash cards.
You need an 8
Duck
- Original Message -
From: Tom Pruneau [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, January 14, 1980 6:07 PM
Subject: 2511 Flash Memory Question
Greetings All
I have a 2511 with 4 MB of flash in it. I need to
There is an IOS compression utility you can try to compress the image.
It's called Mzmaker.
Sincerely,
Peter Kurdziel
CCNA, CCDA, MCSE, MCP+I
http://www.inotez.com
Cisco Q A
http://www.inotez.com/discus
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Sorry to post this out here but I didn't remember the email address to send
changes to. I am no longer with 24 Hour Fitness, I am now at Intuit Inc. I
need to have the messages sent to my new email: [EMAIL PROTECTED]
Again, sorry to post this out here.
Patrick Stiever
CCNA
Network Engineer
It represents the netmask (255.248.0.0) for the network. The easiest way
to get from an inverse mask to a regular netmask is like this:
255.255.255.255 fill 'er up
- 000.007.255.255 subtract the inverse mask
---
255.248.000.000 real netmask
So, if you
I was trying to set up an ISL trunk on my
gigabit fiber link, but it responded that it was only able to run in nonegotiate
mode. Since this is going between two 6509s gigabit fiber link, I was
never able to exchange VTP information between the two in nonegotiate mode, and
it wouldn't let me
I use SnmpC also and use the Airmedia Notify Connect software to page me
based on events within SnmpC..Works great! Actually the SNMPc software can
be set up to page using the Notify Connect software within each users
properties. Let me know if you need any assistance setting it up.
Lonnie
I remember something about ATM not supporting CDP, or
you having to do something special to get it to work.
Don't remember what though.
Mike
--- Robert Padjen [EMAIL PROTECTED] wrote:
Check your code versions - there are CDP bugs that
could cause this.
--- Randy Carlson [EMAIL PROTECTED]
I know that the Router Sim software has some switch simulations. I also
believe that the E-Trainer from Sybex has them as well.
Hope this helps.
Scott
"cslx" [EMAIL PROTECTED] wrote:
Hi,can someone tell me where I can download a Switch simulator?
thanx a lot
waiting your response as soon as
Hey www.thetestpage.net now has a downloadable test engine available.
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk! For your FREE software, visit:
You need to be more specific... We would need to know what the masks are on
the various subnets, both working, and not working... what are the
addresses and masks on the WS that are able to communicate...
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Connect both of them via the serial ports and then set the clocking on one
of them.
Sincerely,
Peter Kurdziel
CCNA,CCDA,MCSE,MCP+I
http://www.inotez.com
Cisco QA
http://www.inotez.com/discus
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Peter English
Ted you cant troubleshoot vlsm without configs.
Some things to remember are subnets are different networks, and need a
router.
VLSM is just a way to effectively use available address space. But they are
still subnets and need to be routed.
1. Find out if you can ping local addresses.
2. Find out
take 255.255.255.255 and subtract your reverse mask to get actual mask
EX
255.255.255.255
- 0. 7.255.255
255.248. 0. 0
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Keith Townsend
Sent: Tuesday, October 24, 2000 12:15 PM
To:
thanks j
never thought of it that way
used to do it the long way
Duck
- Original Message -
From: J Rowley [EMAIL PROTECTED]
To: Keith Townsend [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Tuesday, October 24, 2000 10:44 AM
Subject: Re: Inverse Mask
It represents the netmask
You can practice your BGP with as little as 2 2501 routers connected
back-to-back. Seeing how your home lab setup will not be (at least it
shouldn't be) connected to the internet, feel free to inject as many routes
as you wish while you are practicing.
-Chuck
- Original Message -
From:
You need to set up the Internet Authentication Service (IAS) under W2K. It
supports Cisco RADIUS, as well as many other features. Simply define your
NAS (router) as a client, give it a key, and you should be OK. You will need
to unselect MS-CHAP, which is the default. Then all you have to do is
Another good Nortel Cert link...(watch the wrap)
http://www12.nortelnetworks.com/training2/certification/nnexamguide.html
Note: BOSON Cert tests now also include some Nortel
Core exams
--- Irwin Lazar [EMAIL PROTECTED] wrote:
See:
http://www.nortelnetworks.com/servsup/certification/
Hi Tom,
In your config you will see a line io mem 2 4 4 or something similar (awhile
since i have done this )
simply re-enter this line with a no in front of it.
Which means you have 2 4 meg patitions of flash memory.
To create one partition of 8 enter.
no io mem 2 4 4
Regards,
Jason Baker
Thanx all.waiting for books coming out end of month as well.
Karl
- Original Message -
From: "Robert Hanley" [EMAIL PROTECTED]
To: "Irwin Lazar" [EMAIL PROTECTED]; "'hal9001'" [EMAIL PROTECTED];
[EMAIL PROTECTED]
Sent: Tuesday, October 24, 2000 9:43 PM
Subject: RE: Off Topic - Nortel
Do you know any shortcut to solve this kind of problem:
Implement an access list to block the odd numbers of 255.248.0.0
Thanks,
Billy
""Donald B Johnson Jr"" [EMAIL PROTECTED] wrote in message
018a01c03e11$a659e810$[EMAIL PROTECTED]">news:018a01c03e11$a659e810$[EMAIL PROTECTED]...
thanks j
Sorry. Let me correct this:
Implement an access-list to block only the odd numbers (4th octet) of
123.12.10.x
Thanks,
Billy
""Billy Monroe"" [EMAIL PROTECTED] wrote in message
8t52r7$2g9$[EMAIL PROTECTED]">news:8t52r7$2g9$[EMAIL PROTECTED]...
Do you know any shortcut to solve this kind of
Hi, all:
My company agrees to pay me for an online CCIE training course such that I
could work while study. :-) Do you guys know if there is any good quality
CBT based CCIE courses out there?
Thanks a lot!
-Ya
_
FAQ, list archives, and subscription info:
ATM does not support ATM. This was a feature that was
hoped for in 12.0, but it never came to product. At
this time it is the exception to the SNAP supported
protocols basis for CDP. I presumed that we were
talking about the ASP Ethernet port - if you are
looking for CDP over ATM it will be a
Hi group,
I have some questions .. or you can say many
:)
Q1) In order to be a good Network designer what
Skills should you need ..plus the "CCDA or CCIE Design" ? what are the
responsibility he have?
Q2) What are the type of job or you can say job
names for a "CCDA or CCDP" other than
Just thought this was funny...
I passed my CCIE written last week and was planning to build up to take the
lab in March, but I got a call saying there had been a cancellation in
January and did I want it. Long and the short of it is, I am now ready to
redefine the word failure on a massive
Hello Friends
Could someone explain to me what happens when the invalid timer expires.
And what happens to the route between the invalid timer and flush time.
For eg in IGRP what happens to the route between 270 and 630 seconds
Thanks
SV
_
FAQ, list archives,
Hi group,
I have some questions .. or you can say many
:)
Q1) In order to be a good Network designer what
Skills should you need ..plus the "CCDA or CCIE Design" ? what are the
responsibility he have?
Q2) What are the type of job or you can say job
names for a "CCDA or CCDP" other than
...and may be not. You might want to exchange for later (Lab date.)
Good luck
hv
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Dennis Laganiere
Sent: Tuesday, October 24, 2000 4:03 PM
To: [EMAIL PROTECTED]
Subject: I'm screwed...
Just thought this
HPOV NNM has a filter file, you would add a "discovery filter" to that file,
and then configure NNM to use that filter. Kinda like an access list.
(sorta)
you can filter on all kinds of different attributes.
node type
ip address
node name
some companies (like one I know very well) use an
Does anyone know the URL to download the trial version of Cisco Works for
Windows 5.0. I searched the web site and I cant find it. I downloaded it
once before but I no longer have the file.
Bruce
[EMAIL PROTECTED]
_
FAQ, list archives, and subscription info:
Hello:
The PIX allows by default, everything going from a higher security level,
(Inside=100, DMZ=50, Outside=0), to a lower security. Unless you have
changed
this then your outbound packets are probably fine but when that one external
address tries to respond to the internal address on a high
Never mind, I found it.
""Bruce Williams"" [EMAIL PROTECTED] wrote in message
8t597b$i6u$[EMAIL PROTECTED]">news:8t597b$i6u$[EMAIL PROTECTED]...
Does anyone know the URL to download the trial version of Cisco Works for
Windows 5.0. I searched the web site and I cant find it. I downloaded it
www.cisco.com/offer/edunet/d927 by Dec. 1, 2000
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Are there a lot of Stratacom ??? on the CID? I am taking the exam on
Thursday and the book I am usins does not go into much detail..
Ryan
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure
If your tftp server is not at same network of your
router , you can use ip default-gateway, in order to reach the TFTP server. So,
you'll be able to do the download.
HTH
Henrique Issamu TeradaCPM Comunicações - BrazilCCNP Certified
- Original Message -
From:
Fernando
What would cause the configuration to be "wiped out" from a 5505, besides
the obvious "clear config all"...?
Rick Watson
Network Engineer
OUSD(Comptroller)
703.697.5710
[EMAIL PROTECTED]
_
FAQ, list archives, and subscription info:
Actually 5.1(x) and up don't fit on a floppy, you need rawrite.exe, the
file, 'bh511.bin' and the image file. Run the rawrite utility and specify
the file as
bh511.bin, this will create a temp image with tftp capabilities. Insert the
disk, reboot and follow the directions to tftp the image onto
At 01:55 AM 10/25/00, Mohammed Hakim wrote:
Hi group,
I have some questions .. or you can say many :)
Q1) In order to be a good Network designer what Skills should you need
..plus the "CCDA or CCIE Design" ? what are the responsibility he have?
A designer should be logical, analytical, and
How do you get the freebies? I took the quiz and there is no button the hit
to continue.
-Original Message-
From: Poyerd, Denis [mailto:[EMAIL PROTECTED]]
Sent: Monday, October 23, 2000 7:07 AM
To: '[EMAIL PROTECTED]'
Subject: Free Cisco Upsell Kit...oh yeah and shirt
Try this again
Are there many Stratcom ?? on the CID. I am taking the exam on Thursday and
the book I am using does not cover them in detail.
Thanks,
Ryan Sheahan
Network Engineer CCNP, CCDA, NCAE
Greenwhich Technology Partners
_
FAQ, list archives, and
hello:
I want to know differents between ws-x4232-l3 of 4000 and
2948-l3
thinks a lot in advance
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
www.certificationzone.com
-Original Message-
From: Veronica Tebbe [mailto:[EMAIL PROTECTED]]
Sent: 24 October 2000 06:16
To: [EMAIL PROTECTED]
Subject: CCIE Practice lab
Where is the best place to go for a practice lab or class for CCIE prep?
Any comments here?
V.
Can be many possibilities could be clock rate on modem not set to exact
speed. fautly modem etc
Jason
-Original Message-
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: 10/23/00 6:50 AM
Subject: CRC error
Hi cisco guru,
I have a lease line(connected to serial port).I get about
why on-line, get the real one, you have to do a lot of lab
Sam Li
- Original Message -
From: Ya Wen [EMAIL PROTECTED]
To: Cisco Group Study [EMAIL PROTECTED]
Sent: Wednesday, October 25, 2000 6:40 AM
Subject: Online training
Hi, all:
My company agrees to pay me for an online CCIE
Internet Explorer doesn't work, Netscape does :)
Brent R. Thomas
[EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
James Woloszyn
Sent: Tuesday, October 24, 2000 9:24 PM
To: '[EMAIL PROTECTED]'
Subject: RE: Free Cisco Upsell Kit...oh
are you sure that 2 routers is enough for this,
It is my experience that i need 4 routers at least
Sam Li
- Original Message -
From: Charles Ryan [EMAIL PROTECTED]
To: Fanglo P.M. MA [EMAIL PROTECTED]
Cc: Cisco List [EMAIL PROTECTED]
Sent: Wednesday, October 25, 2000 5:01 AM
Subject: Re:
I think the following URL will give you the answers you are looking for:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/np1_c
/1cprt1/1cbgp.htm#xtocid2807715
-Chuck
- Original Message -
From: "John Zaggat" [EMAIL PROTECTED]
To: "CiscoGroupstudy" [EMAIL
for the ccnp, you can study the book of the ccnp series. However, the ccie
is talking about
you skill to configure the routers/switches/atm, if you want to get this
kind of skill,
work in the field
Sam Li
- Original Message -
From: Brian [EMAIL PROTECTED]
To: Jennifer Mellone [EMAIL
FYI In the US ONLY
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Poyerd, Denis
Sent: Monday, October 23, 2000 6:07 AM
To: '[EMAIL PROTECTED]'
Subject: Free Cisco Upsell Kit...oh yeah and shirt
Sorry for being off subject, but I found very little information for
the paper that I am working on for class, comparing lease-line
vs frame relay.
It seems that most favor frame-relay over leased-line because
of cost, no one compare their merits. In my paper, I presume
that the cost is the
I have a central site with two routers each with a PRI. I have numerous
remote sites with BRI dialing into the PRI as dial backup only.
I would like to set it up such that when the T1 link goes down at the remote
site the BRI ISDN initiates dialing to the PRI for backup. What I want to
do is
I have a central site with two routers each with a PRI. I have numerous
remote sites with BRI dialing into the PRI as dial backup only.
I would like to set it up such that when the T1 link goes down at the remote
site the BRI ISDN initiates dialing to the PRI for backup. What I want to
do is
I don't know about the CBT's but I heard www.globalknowledge.com is a great
school. They offer both online and class room training.
Sincerely,
Peter Kurdziel
CCNA, CCDA, MCSE, MCP+I
http://www.inotez.com
Cisco QA
http://www.inotez.com/discus
-Original Message-
From: [EMAIL PROTECTED]
You need a minimum of 2 routers (naturally) in order to practice some BGP.
With 2 routers (back-to-back), you can configure EBGP or IBGP, you'll only
have 1 neighbor/peer, but it's enough to let you practice the fundamentals.
You can create your BGP neighbor, turn on "debug ip bgp events", and
1 - 100 of 165 matches
Mail list logo