do you use tcp header compression
If yes try remove it first .
Regards
Elias
- Original Message -
From: "Brian" <[EMAIL PROTECTED]>
To: "dennis rufolo" <[EMAIL PROTECTED]>
Cc: "GROUPSTUDY" <[EMAIL PROTECTED]>
Sent: Thursday, November 23, 2000 8:47 AM
Subject: Re: EIGRP Mystery??
Naveen,
The
router with the highest standby priority in the group becomes the active
router,but by default the lowest mac address becomes the active router if both
the active and standby router fails.also be aware that they also said that if
the priorities are the same the router with the hi
Chuck;
I don't know what 11,000 are unaccounted for in your study.I believe you had
tried adding BW + delay and leftover of 11,000.
This is how you could derive at the metric(default using BW and delay)
Metric(IGRP) = (1000/min BW)+ (Total Delay/10)
Metric(EIGRP)= Metric(IGRP) x 256
regards
- Original Message -
From: "James Wilson" <[EMAIL PROTECTED]>
To: "Naveen Sharma" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Thursday, November 23, 2000 9:53 AM
Subject: Re: HSRP
> The MAC address criteria is used when the routers bidding for active status
> have the same priorit
NOPE !
I have seen it many times.
Check IOS (if they do not match put the same on both boxes)
I am trying to remember what was my problem (I was using ISDN)
When I will find my notes I send to you what I have done.
Regards
Elias
- Original Message -
From: "James D. Wil
hi friends
i want to redistribute OSPF with EIGRP and the reditribution is across
different autonomous systems ?
any sugesstions???
sheeraz
_
Get more from the Web. FREE MSN Explorer download : http://expl
Hi ya,
I am about starting my cisco certification and will be happy if anyone in
the house could give me the relevant materials needed for the certification.
I'll like to hear from you.
Thanks
Dapo
_
Get more f
Hi Denis,
Do the 4 remote networks show as Active in the EIGRP topology table ("sh ip
eigrp top" then look for "A" next to routing entries
With a relatively large network like yours the EIGRP quiery boundry for the
DUAL algorithm may be causing 4 of your routes to get "Stuck in Active"
Do the r
Hai Group,
I want to know about the format
of syslog messages thrown by the devices.
I want to capture those messages and anlayse so can
you give some info regading this.
Thx,
Karthi
Hi everybody, I am about to start for my CCNA 2.0 Certification. It seems
there is a set of 4 books from Ciscopress ,but unfortunatelly it is not
available in the Book stall . Hence I request you all to send me all the
study materials ,if possible the web link to study guides on the internet.
Loo
I've just read (and never noticed on the 5500 we have at work), that the
5xxx series has a RS-232 console connector (I assume this to mean DB9 or
DB25) that requires the use of a rollover cable (it did not say null modem),
so I guess that means I need two DB25/DB9 to RJ-45 connectors and a rollove
Title: Packeteer
I wonder if anyone can assist. We have 2 MEG links from a 7500 Router in our organisation to various ISP's. One particular ISP has implemented bandwidth management with the use of Packeteer. They tell us that by placing the Packeteer unit at the ISP they can assist with manag
could the remote 2620 tell the pc the DNS&GATEWAY's Address?if can,how can I
config the router?
thanx!
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Apologies for previous message but it was incomplete!!
Hi
As regards the symbols:
^-Beginning Of String,
$-End Of String,
_-Any Delimeter (beginning, end, whitespace, tab, comma),
.-Any Single Character,
+-matches one or more atoms,
?-matches zero
Hi
As regards the symbols:
^ - Beginning Of String,
$ - End Of String, _
- Any Delimeter (beginning, end, whitespace, tab, comma),
. - Any Single Character,
+ - matches one or more atoms,
? - matches zero or one
atom, * - matches zero or
mo
friends!!
Iam facing a problem in a ISP environment.
Customers connect to our isdn router(3640) and static
ip was given to diff customers and these static
ips are redistributed in to ospf and they can brouse
very
well and it is fine.But the problem is ..suddenly
sometimes they can't browse the n
NOPE !
It has an RJ-45 connector which you can use it
with both DB25 or DB9 connectors from Cisco and
a STRAIT cable NOT ROLLOVER
ELIAS
- Original Message -
From: "Timothy Metz" <[EMAIL PROTECTED]>
Newsgroups: groupstudy.cisco
To: <[EMAIL PROTECTED]>
Sent: Thursday, November
You might want to check on the Associates group, a group setup for CCNA,
CCDA study.
Paul
- Original Message -
From: "Adedapo Omisore" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, November 23, 2000 4:51 AM
Subject: CCNA Assistance
> Hi ya,
> I am about starting my cisco
I have a remote site that I want to connect to our central site that has a
PIX. I was thinking of using IPSec with context based access control. But
I was wondering if GRE is just as good ? ( to Qualify - reliable, easy to
set up, secure and can handle plenty of tunnels) Can anyone advise ?
Man
well, the cable is the same cisco RJ-45 cable used for any console. it's in
fact "inverted" meaning pin1 attaches to pin 8 of the other side and so on.
""Elias Aggelidis"" <[EMAIL PROTECTED]> wrote in message
024801c05548$665ab200$[EMAIL PROTECTED]">news:024801c05548$665ab200$[EMAIL PROTECTED]..
I have seen an issue discussed here before regarding passive ftp getting
mucked up by routing equipment?
I am experiancing this problem at the moment, when using std. windows FTP
clients (default Passive ftp) i get very bad performance issues connecting
to a Unix FTP server ( no config changes
Does anyone know where to find the the cisco product catalog for palm. or a
IP subnet calculator?
Marc Giroux
1501 McGill College, suite 600
Montreal (Quebec) Canada
Tel:(514)847-6866 FAX:(514)847-6802
Email: [EMAIL PROTECTED]
_
FAQ, list archives, and subscript
Can you clarify what you mean by autonomous systems? The term is somewhat ambiguous
in this context.
Thanks,
Pete
*** REPLY SEPARATOR ***
On 11/23/2000 at 9:12 AM ALI SHEERAZ wrote:
>hi friends
>
>i want to redistribute OSPF with EIGRP and the reditribution is across
Dapo,
I've started a new 'hobby' of reviewing on Amazon.com the books I've used.
The three books I used for the CCNA 2.0 are there with all my pithy comments
and suggestions on passing the test, here's the URL:
http://www.amazon.com/exec/obidos/tg/cm/member-reviews/-/A2Z1PROMJX6LVK/1/ref=
cm_
You can get an ip subnet calculator from www.boson.com
dj
"Marc_Andre Giroux" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Does anyone know where to find the the cisco product catalog for palm. or
a
> IP subnet calculator?
>
>
> Marc Giroux
> 1501 McGill Co
You
can download and run a syslog server from your PC. I think Boson has one on
their web site - freebie. After installing it on your PC, (or you can run the
one available in most Unix systems) telnet to your router(s) and from a config#
type "logging 192.168.25.2" or the ip address of your
I guess you didn't read my e-mail very carefully, I said "I DON'T agree
with the illegal pirating of software or other material." I too have
invested thousands of dollars in my training and certifications. Where did
you see "Everybody does it so it's ok" I don't see that anywhere. Furth
Greetings,
Reading through CIT course notes Appendix A.
It states that the Frame Control field indicates the
size of the address fields i.e variable, this is
followed by the size of the address fields is 6 bytes.
Does anyone know the history behind this ?
I´m guessing that it was being pos
YES,
but when I have tried in a 5509 it did not worked until
I have used an ethernet Patch Cord (1 to 1, 2 to 2 and so on)
Regards
- Original Message -
From: "Shahir Boshra" <[EMAIL PROTECTED]>
Newsgroups: groupstudy.cisco
To: <[EMAIL PROTECTED]>
Sent: Thursday, November 23, 2000 3:52 PM
Hi all:
I need that 2 routers cisco don´t hung up the line, all the time must be
openened, and if one of them hung up the line, automatically call another
time.
How can I do this? Are there any command?
Thanks
_
FAQ, list archives, and subscription info: http:/
Title: Packeteer
The Packeteer unit would have the ability to apply some quality of service
to your outbound traffic (via TCP window manipulation with application layer
awareness).
However, doing so would require them to setup a policy based on the
application requirements at your site. I wo
Hi guys / gals,
Here is an interesting problem that I am struggling with at present
Area 4 of my OSPF network is configured as NSSA and has 3 routers in it.
Router 1 is the ABR that connects to the backbone, Router 2 is the ASBR that
is redistributing some IGRP networks into area 4 and Router 3
3Com have a subnet calculator called 3CIPCalc version 1.02 available on
their web site
Shaun (UK)
-Original Message-
From: Marc_Andre Giroux [mailto:[EMAIL PROTECTED]]
Sent: Thursday, November 23, 2000 3:18 PM
To: [E
Hi,
Does anyone have a link for a definitive comparison
between cnnection oriented versus connectionless WAN
Protocols ?
e.g SDLC, HDLC, HDLC (Cisco), LAPB, PPP.
I realise that SDLC, HDLC, LAPB, PPP are all in effect
the same frame format and I´m thinking they should all
be connectionless allo
Hello all,
I know there is a Cisco Press study pack available for CCNP V1.0, I have
been looking on Amazon for the new study pack but the info they provide is a
bit vague. Can anybody comment on whether the CCNP Study pack has been
updated for CCNP V2.0? Any other comments regarding this area wou
if pin 1 attaches to pin 8 and so on would this mean that it is in fact a
rollover cable?? plus i just ran into an issue with and external modem hook
up that required a rollover cable and in indeed we where able to use the
console cable for this.
-Original Message-
From: Shahir Boshra [m
This is not selfhelp.groupstudy.com
Kevin O'Gilvie wrote:
> Hello again Cisco Lovers,
>
> I am trying to put my resume together , I am a Sytems Administrator with
> about 2 years experience in NT primarily, Checkpoint, Mac and client OS's. I
> was wondering if you guys can send me some resume's
I need information about Frf9 compression and what kind of router I should
use for a 128 k link !
thanks.
Claudio Fernandez
mail [EMAIL PROTECTED]
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisc
On Thu, 23 Nov 2000, ALI SHEERAZ wrote:
> hi friends
>
> i want to redistribute OSPF with EIGRP and the reditribution is across
> different autonomous systems ?
on the same router though? This isn't a problem, just "redistribute"
command as normal and specify the AS you are redistributing.
What are considered the best Lab Prep Bootcamps? Could you supply the URL's
of the ones you feel are worth a look?
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTE
Anybody know about the Blackberry???
Any other experiences with the Blackberry, good or bad..
Thanks,
John
[EMAIL PROTECTED]
--
Sent from my BlackBerry Wireless Handheld (www.BlackBerry.net)
The information contained in and transmitted with this e-mail is
confidential
If you look on www.barnesandnobel.com they have the pack for the 2.0v but
you have to wait 1-2 weeks for delivery. but it you are able to spend the
extra $ I would suggest you get the individual books mainly cause they come
with test engines that will help in your studies and the library does not
in the router config what does this stand for
ip htpp server
thanks
__
Do You Yahoo!?
Yahoo! Shopping - Thousands of Stores. Millions of Products.
http://shopping.yahoo.com/
_
FAQ, list archives, and subscription
Isn't there a command to suppress the annoying "00:01:35: %SYS-5-CONFIG_i:
Configured from console by console" line and dramatic pause every time you
exit the config term? I was so happy to learn the "no ip domain-lookup"
command to suppress the pause every time you mistype a command, but this on
i
What about running the ABR (R1) as "stub no-summary"? and just leaving the
other routers in the area as "stub".
Brian
On Thu, 23 Nov 2000, Simon Hope wrote:
> Hi guys / gals,
>
> Here is an interesting problem that I am struggling with at present
>
> Area 4 of my OSPF network is configured
i am a regular user of the cisco netacad program -
i am allowed to enter the CCNA program but for now
i am not allowed to enter the CCNP program anymore -
the regional academy where i am studying does not have the CCNP license so
far.
i am nearly finished with the CCNP program . until yesterday i
On Thu, 23 Nov 2000, Brian Dellong wrote:
> in the router config what does this stand for
>
> ip htpp server
its "ip http server", it allows you to access ther outer via http, and
imho is a bad idea in a production enviroment.
brian
>
> thanks
>
>
> ___
It is my belief that the P bit is unmodifiable. Type 7's are advertised as 5's to the
OSPF domain in almost if not all manufacturers equipment. Although some texts allude
to the fact that you can control this behavior with a nob, I've never seen it.
Pete
*** REPLY SEPARATOR *
On Thu, 23 Nov 2000, B R wrote:
> friends!!
>
> Iam facing a problem in a ISP environment.
> Customers connect to our isdn router(3640) and static
> ip was given to diff customers and these static
> ips are redistributed in to ospf and they can brouse
> very
> well and it is fine.But the problem
On Thu, 23 Nov 2000, Dennis Laganiere wrote:
> Isn't there a command to suppress the annoying "00:01:35: %SYS-5-CONFIG_i:
> Configured from console by console" line and dramatic pause every time you
> exit the config term? I was so happy to learn the "no ip domain-lookup"
> command to suppress t
What kind of traffic is being passed? You can set it up so that ip traffic
or whatever traffic keeps the line up.
Or you can use "dialer idle-timeout 3600" command to specify the amount of
time the link is up after it comes up.
We use an access list to bring up a connection i.e. "dialer-list 1 p
Title: RE: annoying line after config t
I believe you want "no logging console."
- Don
-Original Message-
From: Dennis Laganiere [mailto:[EMAIL PROTECTED]]
Sent: Thursday, November 23, 2000 10:40 AM
To: '[EMAIL PROTECTED]'
Subject: annoying line after config t
Isn't there a comm
This should do the trick:
SomeRouter(config)#no logging console
Sincerely,
Peter Kurdziel
CCNA,CCDA,MCSE,MCP+I
http://www.inotez.com
Cisco Q&A
http://www.inotez.com/discus
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Dennis Laganiere
Sent: Thursday,
Yes, I have used it for about 1 1/2 years. It is tied to my work email,
Exchange\Outlook account. Works teriffic.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Johns, John A.
Sent: Thursday, November 23, 2000 10:19 AM
To: '[EMAIL PROTECTED]'; '[EMAIL PR
>Hi,
> Does anyone have a link for a definitive comparison
>between cnnection oriented versus connectionless WAN
>Protocols ?
>
>e.g SDLC, HDLC, HDLC (Cisco), LAPB, PPP.
>
>I realise that SDLC, HDLC, LAPB, PPP are all in effect
>the same frame format and I´m thinking they should all
>be connecti
I just bought the BSCN book from Cisco press...
There is no cd or sample test engines ...just the book
Keith J
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Faxon, James
Sent: Thursday, November 23, 2000 9:25 AM
To: 'Andy Kirkby'
Cc: '[EMAIL PROTECTE
Liwang,
You aren't comparing apples to apples in your questions. Let me
see if I can shed some light on the subject.
IPSec is a VPN technology that is responsible for securing a data
stream between two VPN peers. It does not provide multi-protocol
support, so if you need to transport anything
Great explanation!!! Adam Quiggle.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Adam Quiggle
Sent: Thursday, November 23, 2000 1:13 PM
To: Liwanag, Manolito; 'Cisco Group Study'
Subject: Re: GRE VS. IPSEc
Liwang,
You aren't comparing apples to apple
I assume you are using ISDN and IP but no matter you can do similar for other
protocols.
Set the dialer idle timeout to 200 or so.
Router#(config-if)dialer idle-timeout 200
Ensure you have something set to make the call for example,
Router#(config)dialer-list "dialer group number" pr
Excellent reading !
Adam Quiggle <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Liwang,
>
> You aren't comparing apples to apples in your questions. Let me
> see if I can shed some light on the subject.
>
> IPSec is a VPN technology that is responsible for s
I find the stuff on the Cisco CD that comes with any Cisco device has the most useful
study materials on it. Whilst often being hard to read it covers all areas.
Other areas such as examcram.com and informit.com also have good stuff. Informit
actually send you off to a cisco info section th
I found the new stuff in our local bookshop in my part of the world. So I would guess
it should be available in yours.
I does look similar to the v1 but of course with the new stuff. Even the BCSN is now
there.
Tony van Ree (Teunis)
Hobart, Tasmania
Australia
On Thursday, November 23, 2000
Hi All
Thanks for suggesting me whats up gold software.
I would like to ask you is there any other product
available who can compete whats up gold
thanks in
advance..
I read it very carefully which is why I replied.
And it's always easy to say let's stop this thread here when another reply
doesn't suit you.
You quoted my "break the law" comment as if it was wrong to do so and all I
have said is that normal people in this day and age know that such activity
is
Yes,
Its
called HP Openviewbut is 500 times more of a mission to set up
and modify
-Original Message-From: Krishna Shankar
[mailto:[EMAIL PROTECTED]]Sent: Wednesday, November 22, 2000 3:29
AMTo: [EMAIL PROTECTED]Subject: Whats Up
Gold
Hi All
Thanks
In the switches it allows one to turn on or off the WEB management functions. I
assume it is the same in your device.
To look at the equipment via a web interface makes it nice but be aware of any
security type issues.
Teunis
On Thursday, November 23, 2000 at 01:09:05 PM, Brian wrote:
> On
Hi,
I am working towards CIPT 2.0 (Cisco Call Manager v3.0) exam.
I have a CAT 6K in the core with 6608 (8 port E1 blade) as per the CIPT
LABs.
The problem is that the 6608 resets itself after about 40 S, making it
very difficult to complete a call over the E1 link.
It seems to help if I disab
Title: BSCN/Routing 2.0 Test Question
I'm
not trying to start a fight or anything, but i laugh everytime i hear someone
say you will live by subnetting, in 5 years its never been an
issue,
see
ya
-Original Message-From: Fernandez, Raul
Sent: Wednesday, November 22, 2000 2:1
It's important to remember your default mask for all 3 address ranges when
looking at a question like this. A class B address has a default mask of 16
bits, so if " You have an IP address of 172.16.4.58 with a 12-bit subnet
mask." you would add an additional 12 bits to the default mask and from
th
Hi all
Is there any good competetor product for Whats Up
Gold..If yes please tell me
thanks in advance
Keith,
i am not sure what book you got but if you check this site out they are
saying the new individual cisco books are comming with CDs??
it will be the 4th book down but pls let me know if you bought this book and
it does not really come with a cd cause i have been waiting for the routing
boo
cisco press bscnisbn 1578702283 no cd
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Faxon, James
Sent: Thursday, November 23, 2000 1:32 PM
To: 'Keith J'
Cc: '[EMAIL PROTECTED]'
Subject: RE: CCNP Study Guides
Keith,
i am not sure what book you go
Big Brother is excellant.
http://www.bb4.com/
On Thu, 23 Nov 2000, Krishna Shankar wrote:
> Hi all
>
>
> Is there any good competetor product for Whats Up Gold..If yes please tell me
>
>
> thanks in advance
>
_
FAQ, list archives, and subscription
G Day
I am currently looking at setting up a home lab to
self study CCNP. I would be most appreciative if any one would be able to assist
me
by advising what equipment would be required and
avaiable to carry out most of the labs.
I am in Australia and am willing to purchase second
han
What is a looking glass and what is it used for?
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Is there any telnet application that I can load on a Windows CE HandPC?
I need this so I can have telnet access when I do not have my laptop with
me.
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondi
Mitsunori:
I was looking through the Sybex CCNA Study Guide 2nd edition, and couldn't
find the question you reference--I assume it's from a different book in
their CCNA series...
I recently completed a project with Sybex that is due out in January. The
one thing my editor and I really worked on
Well you can always have a inbound prefix-list at your side to prevent the
swamping right?
correct me if I am wrong
Jason
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Michael Fountain
Sent: Wednesday, November 08, 2000 12:02 AM
To: [EMAIL PROTECT
Usually it is a way to run non-privileged commands on a router. Go to
http://nitrous.digex.net and you may access routers that are in select
locations on the internet.
Take care,
Paul Borghese
- Original Message -
From: "Austin" <[EMAIL PROTECTED]>
Newsgroups: groupstudy.cisco
To: <[EM
I went to the Cisco website to get the information regarding this beta, but
it is no longer listed. Are they no longer offering this beta or am I just
looking in the wrong place?
_
Get more from the Web. FREE M
It allows one to look through the Net.
I often use them when looking for a fault for example.
I have a client call in they cannot get stuff from the "States" to "Australia". I
would log into a looking glass say in the US and perform a traceroute back to the
network in Australia.
These are ve
hi anyone
knows what's the command to set username and password
for router logon for telnet
suave guru
__
Do You Yahoo!?
Yahoo! Shopping - Thousands of Stores. Millions of Products.
http://shopping.yahoo.com/
_
F
Hi All,
Could anyone supply me with a sample config or give me some pointers on
configuring a 2610 to provide modem backup to a 64/128k isdn link. The isdn
has to use a fixed ip address supplied by one isp and the aysnc modem has to
use a dynamically assigned ip address from a completely differen
You may want to look into this:
Nortel Networks Optivity Network Configuration System
http://www.nortelnetworks.com/products/01/unifiedmanagement/network/opt_ncs.html
--- Tammy Slater <[EMAIL PROTECTED]> wrote:
>
>
> All,
> We support over 500 components and different models
> of Cisco hardwa
Try
this assumes you already have an enable passowrd set.
router#(config)line vty 0 4
router#(config-line)password (password)
router#(config-line)
and
set the enable password
router#(config)enable password (password)
All this stuff is available on the Cisco CD and or config manuals.
Teunis
reason is because when building the frame-relay circuit you need to build
two parts , one is towards the customer from frame switch the other one is
from provider's router to frame-switch , I normally use the same dlci nos
for the two parts but you can use different
Jason
-Original Messa
I have had one for about a year and like it but coverage is spotty. Many
dead areas in my building. I will walk around and when I get close to an
outside window the thing goes off like crazy receiving all the emails sent
to me while in a dead zone (sounds like a Steven King movie, huh?). At hom
I'm setting this unit up for the first time and can't ping across. Anybody
had any experience with this unit? Let me know...
- Dennis
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure vi
this post(s) was posted a couple of days back and just
wanted some more list memebers to see if this correct
before we take this as gospel truth.
---
Neil Desai <[EMAIL PROTECTED]> wrote:
> To my knowledge serial links don't have a MAC
> address. Sin
Title: Packeteer
Hi
there,
Is it
true you need to troubleshoot entirely a new scnerio when you
are trouble shooting in day 2? AnyOne knows about this?
Regards,
SchahzaD
Depends on your paper, and thats going a little beyond the NDA.
At 11:45 PM 23/11/2000 -0800, ShahzaD Ali wrote:
>Hi there,
>
>Is it true you need to troubleshoot entirely a new scnerio when you are
>trouble shooting in day 2? AnyOne knows about this?
>
>Regards,
>
>SchahzaD
__
On Thu, 23 Nov 2000, ShahzaD Ali wrote:
> PacketeerHi there,
>
> Is it true you need to troubleshoot entirely a new scnerio when you are
> trouble shooting in day 2? AnyOne knows about this?
Yes. It use to be they took your own scenerio and broke it. That changed
a short time back. now they
Hi,
Thanks for your reply.
I just want to know how to write
a syslog server of our own.
In which port the messages are
thrown and what's the format of that messages.
Where can i get info about
this?
Thx,
karthi
- Original Message -
From:
Gordon Olson
To
Hi,
How do I config EXTERNAL DSU/CSU on 1005 and 2501, I tried to simulate 56k
link across those two, but I couldn't find the command or how to config
this, before I was used cross-over between those two.
The cross-over between two DSU/CSU was working (its display linked @56k)
Here is my layout
Hello
Have anybody integrated 3Com with CIsco on Dial
Backup.
I have integrated 3Com Router NetBuilder's Office
Connect with Cisco 3661 over dedicated link and it is
working fine. Now I am facing some problem on Dial
Backup from Cisco to 3Com or otherwise.
Any suggestions?
Thanks in advance.
The link that they have been giving you describes
regular expression notation, but it is hard to see how it applies to routing.
Use the command "show ip bgp regexp
[regular-expression] to see what routes match. This will help you probably more
than any tutorial on regular expressions, be
Tony,
Do you have access to the router? If you do, telnet to it then enter these
commands shown below.
DialBackup#term mon (enter this)
DialBackup#debug modem (enter this)
Modem control/process activation debugging is on (it will return this)
DialBackup#debug ppp authen (tab)
DialBackup#debug
97 matches
Mail list logo