Depending on the architecture of your network, you can balance the traffic
of multiple VLANs across different links by setting the root bridge to
opposite switches.
So if you have an access layer switch feeding into say 2 catalyst L3
switches, you can set the root bridge for VLAN2 to the first Ca
Remember that even if you can create 1024 VLANs on your switch, you need a
router that can handle that many networks and the traffic between them. The
L3 switching module only supports 256 VLANs.
""Santosh Koshy"" <[EMAIL PROTECTED]> wrote in message
96q7ph$u4s$[EMAIL PROTECTED]">news:96q7ph$u4s
$700 is a good price for a 2503, I would try to look for one with at least
8MB flash, 16MB is always better of course, but 8MB at least. You can add
8MB more if needed for around $100.
Brian
On Mon, 19 Feb 2001 [EMAIL PROTECTED] wrote:
> Hi just one question dose a used 2503 worth $700? Caus
The CSS series switches are from the Arrowpoint acquisition. We purchased
one while they were still Arrowpoint and I must say that they are
*seriously* cool boxes.
Basically, it is a switch that can see up into the higher layers to make
switching decisions. Let's say you had three web servers t
Here's a guess. The BGP community attribute is optional, yet transitive.
This means that a particular implementation of BGP on a router may not use
or understand the concept of communities. However, because the attribute is
transitive, it will be forwarded along to other neighbors who may be ab
Hi,
I'm playing with 2511 terminal server and plugged a router and a firewall on
the async ports. But when I try to connect to the fire wall with 2001 I get
an error msg "% Connection refused by remote host", I can ping it and I can
telnet to it via cross-over cable!!??.
Any device.
Regards,
You need to do url forwarding in IIS. It's more of a Microsoft issue than a
Cisco one. Our company is going through the same process. Hope this helps,
let me know if you have any questions.
Joey
-Original Message-
From: Sam [mailto:[EMAIL PROTECTED]]
Sent: Friday, February 16, 2001 5:38
I passed Switching on Friday and can now call myself a CCNP. Many, many
thanks to all those who responded to my questions over the last months.
Special thanks to those "gurus" who regularly provide answers and
clarification to the toughest questions.
Nathan Miller
CCNP
Enterprise Network Engine
Look up Router on a Stick configurations.
- raj
""Circusnuts"" <[EMAIL PROTECTED]> wrote in message
004f01c09a60$6082d9e0$[EMAIL PROTECTED]">news:004f01c09a60$6082d9e0$[EMAIL PROTECTED]...
> Same precess as a Cat5K withought the RSM.
>
> Yes
>
> Phil
>
> - Original Message -
> From: "Cra
Modify this to suit your equipment, isp etc.
!
version 11.3
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname 2520
!
enable secret 5 $1$UUDA$erjWAs69xoDqDLj7APkFO.
enable password secret
!
ip nat inside source list 100 interface Serial3 ov
Thanks, Erick.
It seems that you have basically said,
"Yes, UDP forwarding is not part of HSRP."
But you also apparently agree that there is no technical reason why this
must be true :)
>Maybe they need to add a feature, like standby helper or something so
>when HSRP is being used it will on
Same precess as a Cat5K withought the RSM.
Yes
Phil
- Original Message -
From: "Craig Lindstrom" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, February 19, 2001 4:35 AM
Subject: 2901
> Can a 2901 do layer3 switching with an external router?
>
> Craig Lindstrom
> "Build a m
What does this mean :
"IF A ROUTER DOESNOT UNDERSTAND THE CONCEPT OF COMMUNITIES IT WILL DEFER TO THE NEXT
ROUTER"
Please help.
Thanks
Manish
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclos
> Andrew,
>
> If you have access to CISCO's web site then have a look at this link. It
> seems that there is a problem with your IOS . Try upgrading it , may
> helps.
> http://www.cisco.com/warp/public/122/crashes_router_troubleshooting.shtml
>
>
There is one more link that you can visit & it i
A few lines.
Voice-over-IP (VoIP) enables a router to carry voice traffic (for example,
telephone calls and faxes) over an IP network. Cisco's voice support is
implemented using voice packet technology. In VoIP, the digital signal
processor (DSP) segments the voice signal into frames and store
How are vlans uniquely identified then; if the switch itself supports only
1024 MAC addresses.
Can u point me to some white paper or tutorial as to how this works...
Thanx,
Santosh
""Brant Stevens"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I believe the
Per my other post, STP prevents looping traffic in general, not simply broadcasts.
Pete
*** REPLY SEPARATOR ***
On 2/19/2001 at 6:50 AM Kenneth wrote:
>Jason is right. This will defeat the purpose of Spanning Tree of creating a
>single path to a destination. The primary reaso
I don't think you can put a single port on two VLANS unless you configured
trunking if my memory serves me right.
with Per VLAN spanning tree a particular switch can belong to multiple
instances of spanning tree and in each spanning tree instance, it might be
acting as a root bridge, some ports m
Jason is right. This will defeat the purpose of Spanning Tree of creating a
single path to a destination. The primary reason this was designed was to
prevent broadcast loops.
If you want to force it to use 2 paths to one destination, use
port-channelling which statically load-balances traffic goi
Hi
I am searching for this cisco course book "Managing Cisco Switched
Internetworks".
I will trade or purchase for it. Can anyone help me?
Thanks, Mike
CCNA,CCDA
CCNA Wan Switch
CCNP,CCDP
CCDP SNA Migration Specialist
CCNP w Voice/Atm/Security/Sna
MCSE, MCNE
CCIE
__
Output from Stack decoder on Cisco website...
Session ID: 3A9106E8718A
General Diagnosis:
Hardware:
No failures detected.
Software:
rsym error: No symbols found found, please contact the TAC to assist in
di
pretty good. About the same price i paid for at ebay.
<[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi just one question dose a used 2503 worth $700? Cause I would like to
buy
> it if its OK.
>
> Thanks in advance
>
> Tarry.
>
> --
> Sent through GMX FreeMa
If this equipment is attached to an external CSU/DSU, you might have
loopback set on that equipment.
"Thomas" <[EMAIL PROTECTED]> wrote in message
96qjjv$94a$[EMAIL PROTECTED]">news:96qjjv$94a$[EMAIL PROTECTED]...
> Hi All - I am bringing up a frame circuit from a remote site. However, I
> coul
Hello Robert
Here are some interesting URLs to start with. If you need more specific info
please ask
http://www.cisco.com/warp/public/788/voip/voip.shtml
http://www.cisco.com/pcgi-bin/Support/PSP/psp_view.pl?p=Internetworking:VoX:
VoIP
Moscha
- Original Message -
From: "Robert Nickson
Att
Flaviana Azevedo
Engenharia de Sistemas
Prolan Solu=E7=F5es Integradas -SA
[EMAIL PROTECTED]
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
A little off the subject but 5000 brains are better than 1Any way we
support 2000 NT sites remotely and don't have full router access on these
sites.What i need is a free piece of software that can be run from a dos
prompt to sweep ip's on a LAN.
Any help would be appreciated
Cheers
Bob
Hello all,
I am having a problem with a WIC-2T. The setup is as follows: A pair of
HDSLs connected back-to-back. The clock is generated from one of the units
internally, and the other unit receives this clock and uses it. When I
connect a normal serial at one end to a smart serial on the other
Show ver is below as well as show stack
SAFCOVER>sh stack
Minimum process stacks:
Free/Size Name
5504/6000 IPX Router Init
5584/6000 Call Management
11388/12000 Router Init
9356/12000 Init
5300/6000 RADIUS INITCONFIG
2464/3000 IP Gratuitous ARP
8040/9000 DHCP Client
4576/600
Hi,
I've been given two old Digital Decbrouters to play with but I haven't got
the enable passwords - does anyone have a technique for getting the
passwords out of these Digital routers ?
cheers
Chris Hinds
**
This communica
Check your configuration if you're running an integrated csu/dsu that
you don't have a 'loopback' command configured. If you're running an
external csu/dsu, check that you don't have a local loopback or loopback
dte.
If the above are negative, speak to your telco and see that they have a
loop inst
I assume you're talking about the ICA secureclient. I have not used it, but
according to Citrix it does slightly degrade performance (vs. normal ICA).
However, I can't see it being a serious degradation. For the PIX setup, the
Citrix/ICA protocol works like most (e.g. ftp). It listens on one defau
I think you'll need to open a Cisco TAC case for this one,
but send the 'show stack' and 'show version'
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Andrew Larkins
Sent: Monday, 19 February 2001 8:33 PM
To: Cisco Mail List
Subject: Router crash - what
Can someone give me a few lines on VOIp don't know much about it ?
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Hi all,
Our Cisco 3640 router at the DRP site crashed. Router was in "rommon1>" when
I got there. By pressing "i", the router rebooted and came up fine.
The output of the show ver is below. What does the error message mean - does
it (PC 0x603503CC) point to a specific cause..?
ROM: System
Hi just one question dose a used 2503 worth $700? Cause I would like to buy
it if its OK.
Thanks in advance
Tarry.
--
Sent through GMX FreeMail - http://www.gmx.net
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report mi
You could start with Cisco website
http://www.cisco.com/warp/public/779/largeent/learn/technologies/content_networking/distribution.html
bosire
John Green wrote:
> what exactly is this technology "content distribution"
> ?
>
> how content is distributed over the internet ?
> any links/info/t
Hi all,
I wonder if Paul Lalonde got an answer for his question below because I'm
also looking for something similar. Pls help, anybody ?
Paul, I hope you are reading this.
Regards
I'm looking for an example configuration of async modem dialup from a Cisco
router to a
101 - 137 of 137 matches
Mail list logo