-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Are you bored and want some excitement?
Las Vegas Has Just Showed Up In Your Neigbourhood!
In fact, you wont even have to leave your computer!
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Queensclub Online Casino
If you have sth want to trade including studying material (MCSE W2K, CCNA
2.0, Solaris, CCNP, CCIE...etc)/resources/games/warez, pls write detail
to me stating what you have and what you want.
A lot of materials...here.
Thanks!!
_
FAQ, list archi
Gil,
Should think you want to convert to access-lists throughout.
Regards,
Gaz
- Original Message -
From: "Gil Shulman" <[EMAIL PROTECTED]>
To: "'Gareth Hinton'" <[EMAIL PROTECTED]>
Sent: Thursday, March 29, 2001 10:48 AM
Subject: RE: PIX virtual telnet
> Hi,
>
> Yes I have both typ
Is anyone aware of any 'unique' characteristics regarding the DHCP (client)
implementation on PIX 5.x?
I tried assigning an IP to the outside interface via dhcp with a linksys
switch dhcp server and it failed. When I plugged it straight into my cable
modem and repeated the process, it worked
@ least 11.2 Before you have answer this question, what is you FLASH/ RAM/
boot ROM version
Phil
- Original Message -
From: "EA Louie" <[EMAIL PROTECTED]>
To: "Alex Lee" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Thursday, March 29, 2001 3:08 PM
Subject: Re: 2509 image (was 508-CS v
Hello Gang,
Is it possible to find how old is a router based on the show version or any
other output.
Thanks
RamG
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL
hi! with this assignment it came with a exe. simulation file which i
atttached along with this mail. u need to use start > run command to insert
the parameters and see the results. first type in ethersim.exe/? to see how
to key in the parameter. Please do let me know how this assignment works.
Tha
Well, took the test (finally) this morning and passed with a 946 (out of =
849 to pass, as almost everyone knows by now). I really want to go back =
to the Cisco Press CCNA study guide, it was much more thorough (and less =
error riddled) than Lammle's Sybex book. Not that the Sybex didn't have =
I have installed some new MIME software to use on the list. This should help
reduce the number of messages with an equal sign appended to each line.
The software will also filter any footer info from the list. So replies will
no
longer contain two lines of text and 20 lines of copied footer inf
>If you have sth want to trade including studying material (MCSE W2K, CCNA
>2.0, Solaris, CCNP, CCIE...etc)/resources/games/warez, pls write detail
>to me stating what you have and what you want.
>
>A lot of materials...here.
>
>Thanks!!
Warez,eh? Possibly study materials that w
I'll be quite honest and say I haven't done a detailed investigation
of the IOS implementation restrictions here. My intuition would be
that IOS has one ARP cache per subnet per physical router, and having
multiple router ports in the same broadcast subnet confuses the ARP
mechanism. On a fir
I took the exam yesterday (got a 901 on it). A tip for the group, use the
Cisco Press book. It was much more thorough than the Sybex book (even though
Sybex is easier reading).
Just my $0.02
John
_
FAQ, list archives, and subscription info: http://www.groupstudy.c
The serial ports will 'see' each other, but if you're configuring the hub
router as a frame relay switch you are no longer routing IP through the
router, you are switching frame relay frames from one interface to the
other. In that scenario, an IP routing protocol is unnecessary because you
are n
hello,
can anyone confirm the news that cisco is going to terminate the cvoice
certification. are they going to integrate this paper with something else.?
umer
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct
Thanks, Clayton, But I could not connet to the router using Tera Term Pro
with SSH. I know the Tera Term is working because I have been using it to
connect to my PIX through SSH. My router running Version 12.0(7)XK1 with
DES support.
I did the following.
> Router(config)# hostname hostname
> R
Congratulations! great score,enjoy the beer, it will help decompress the
brain a little...
- Original Message -
From: "Patrick McAllister" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, March 31, 2001 9:19 AM
Subject: CCNA...
> Well, took the test (finally) this morning
This is all new information to me! I had no idea that I could place two
separate serial interfaces into the same subnet, so I just tried it. I set
up two back to back cables between two routers and put both lines on the
same subnet. I was amazed that it didn't freak out.
I noticed that when
To answer your first question, read:
http://www.cisco.com/warp/public/10/wwtraining/certprog/special1/course.html
Previously Cisco's specialized certifications were primarily CCNP+(pick 1 of
5). The new direction is specialties without CCNP. Also, the CCIE
Communications and Services Track has
How's about a little 'real-life' observation on a 515UR/failover package:
Problem:
external limited to ~850Kbit/s since install. Normal range, 2.5-3.5Mbits/s
internal ether on 515 does not exceed 140-160KBytes/s
internal ether has unusual number of IP transport retransmissions.
no apparent loops/
I'm not sure if that release supports ssh. It might have to be one of the
12.1(x)T releases.
Clayton
""Groupstudy.com"" <[EMAIL PROTECTED]> wrote in message
9a53ff$1pr$[EMAIL PROTECTED]">news:9a53ff$1pr$[EMAIL PROTECTED]...
> Thanks, Clayton, But I could not connet to the router using Tera Term
OK, here's the deal,
I need to monitor a T-3 before and after a Firewall
So:ISP---7206Switch-FirewallSwitchRouterLANs
with the 2 different IDSes ( Intrusion Detection System ) hanging off of a
monitor port on each switch.
I was starting to get collisions on the firewall
Check www.xyplex.com
--- KP <[EMAIL PROTECTED]> wrote:
> Does anyone know of another option for a terminal
> server outside of a CS-5xx
> or 25xx. I would love to put a terminal server off
> my cable modem
> connection (legal IP address) and be able to reverse
> telnet from it. I have
> a bunch
do NOT Teraterm Pro, it doesn't work. The reason is that I think Cisco
user SSH version 1.5.x or something which is something Teraterm does not
support. Try putty. You can search for it from www.google.com.
I had the same problem you have before. When I switch over to putty
or minterm, it work
Oh, Clayton is right. The IOS I am running is 12.1.7 with 3DES.
However, my previous answer is correct that you need to use putty or
mindterm ssh clients because Teraterm doesn't work with Cisco SSH in
version 12.1.7. I learned it the hard way.
>From: "Clayton Price" <[EMAIL PROTECTED]>
>Reply-
Hmmm... CD full of virus source code, MS C compiler, slipknot software, and
some practice tests... 10, 9, 8, ... BOOM!
Nobody would do that, would they??? [=`)
Z
>From: "Howard C. Berkowitz" <[EMAIL PROTECTED]>
>Reply-To: "Howard C. Berkowitz" <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subjec
The limit on Cisco routers is 4 Serials in the same subnet... but my
question is:
What problem does that solve? Why would I want/need to do that?
Any thoughts?
Z
>From: "Howard C. Berkowitz" <[EMAIL PROTECTED]>
>Reply-To: "Howard C. Berkowitz" <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subj
I need the keepalives from the Ethernet interface for
LMI
--- martijn michiel <[EMAIL PROTECTED]>
wrote:
> First thing that jumps into mind is why don't you
> define a loopback
> interface with an ip address?
>
> Martijn
>
> -Oorspronkelijk bericht-
> Van: [EMAIL PROTECTED]
> [mailto:[E
try www.tcytech.com, a small place but the training is better than average.
cheers,
ak
Mike Peterson wrote:
> Hi all,
>
> Does any one knows if there is a very good CCIE LAB in NYC area...
> something like the LAB in San Jose?
>
> Thank you,
>
> Mike
>
To [EMAIL PROTECTED],
Whoever you are, you are using my name. Please discontinue doing this as
this is not ethical.
I hope that you made a mistake and is not playing games with me and the
ciscogroupstudy.com.
Arthur C. Simplina
>From: "Arthur Simplina" <[EMAIL PROTECTED]>
>Reply-To: "Arthur
This one's kicking my ass. Should be simple, but apparently it isn't. I've
got three routers in a frame relay configuration: R3 is the hub, R4 and R5
are the spokes. For some reason the routes aren't being exchanged the way
they should be, in spite of the fact that all the OSPF adjacencies *app
Jake,
Technically, not all Cisco switches are Catalysts, only the LAN switches, WAN switches
aren't (well...they ARE switches..)
Anyway:
IOS:2900XL, 3500XL, 4840G, & 6000
Cat OS: 2900G, 4000, 5000, 6000, 8500
Menus: 1900, 2820, 3000 (3100, 3200), 3900 Token Ring
Does this sum things up f
Hey Brad,
Could you please paste your frame-switch configuration in a reply? Also, one
thing that caught my eye was the formation of DR/BDRs in your lab. When you
have point to multipoint subinterfaces, there should not be any DR/BDRs.
Could you do a show ip ospf int s0.1 on R3, R4, and R5? Al
Below you'll find the FR switch configuration (important parts, anyway).
Also, s0.2 on R3 is a point-to-point PVC to another router (R6).
In the last hour, I've actually gotten the OSPF to work correctly by using
"ip ospf priority" statements. What was happening was that R4 (a spoke) was
always
Took it myself on Thursday. Was in and out in 25
minutes, and that includes the 68 question survey at
the end. So far, the easiest Cisco test I have ever
seen. I read both Cisco Press and Sybex and Cisco is
definately better. The Sybex book goes along with
SimSwith, which I must say, though th
Dear Group,
A while ago I brought a problem to the group re: two networks on the same
wire, (prime and secondary on the router e0 interface) and using policy
routing so that one went out one serial and the other went out the second
serial.
Neither LAN should go out the other's serial (or come in
Hello People,
I sit the BCRAN on Tuesday. Does anyone out there know if there are any
fillin the gaps in the EXAM
Cheers
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMA
Hi,
I took the course last November, and it was okay, but I cannot say if it
is enough to pass the exam. I took it before the exam details were released.
Cheers
Kerry
""Tom Thomas"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I take it in 2 weeks email me
Hello,
I'll soon be studying for the Support exam, can any one recommend books.
Thanks in advance
Kerry
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Guys,
Sorry if this sounds silly, but I am not too sure!
Is this the right group for someone pursuing their CCNP. I am asking
because I cannot see any mail in the list on the Support & BCRAN exams, and
also on other exams
Cheers
_
FAQ, list archives, and subs
Hi,
I used "CIT Cisco Internetworking Troubleshooting" by Thomas M. Thomas and
CCNP Support Study Guide by Todd Lammle. These books were a great help, I
also read a few chapters of the Cisco CIT book.
Hope this helps, good luck on you studies.
K. Manji
CCDA CCNP
>From: "Kerry" <[EMAIL PROT
>The limit on Cisco routers is 4 Serials in the same subnet... but my
>question is:
>
>What problem does that solve? Why would I want/need to do that?
My gut tells me that this is not really a planned-for limit, and sort
of happened.
>
>Any thoughts?
As a wild guess, it might be to allow the
Thnaks Herold,
I seem to have it working and its much faster than CD access!
However I could not use XCOPY, it terminated with some problem.
You were right windows does not copy - it never stops, making disk file
bigger and bigger.
I used XXCOPY which is a shareware. Even this produced some e
I passed today with a score of 857...I just wanted to say that I thought
this test was harder than the BSCNmaybe I think backwards or
something (I scored 931 on the BSCN)...thanks to all that have posted and
study hard.
-
Why not any DR/BDR? The default network type for multipoint is NBMA which
forms adjacencies. What we need here is a dump of the show ip ospf neigh
and show ip ospf int commands. I am guessing it is that the hub is not the
designated router.
--
Eric Fairfield
CCIE #6413
""Fred Danson"" <[EMAI
That's true, so he pretty much had 2 choices in that situation. He could
either switch the OSPF network type to multipoint on the hub and the spokes,
or he could insert neighbor statements. Both ways would work.
Fred
>From: "Eric Fairfield" <[EMAIL PROTECTED]>
>Reply-To: "Eric Fairfield" <[EM
> HOWEVER.
>
> Always one of these
>
> I have uncovered a "quirk" or bug that I can't find on CCO. Getting ready
> to open a Tac case on this one.
>
> If the router is reloaded, after it's up and just before the "Press return
> to get started!" line - I see this:
>
> "Secondary ad
and right you are Bug Id : CSCdr51651
When you reload a Cisco router that it is running Cisco IOS Release
12.1(2)T,
any configured secondary IP addresses on Ethernet and Bridge Group Virtual
Interface (BVI) interfaces are removed from the configuration.During
start-up,
the Cisco router di
Can't be 16/32 RAM that I know of (max should be 16/16)... Check Ebay under
Cisco 2511 (previous sales) & you should see the going price. I would say
900-is would be fair to both parties.
http://search.ebay.com/search/search.dll?MfcISAPICommand=GetResult&ht=1&Sort
Property=MetaEndSort&query=cis
I am using a 2900XL with 2 IDS's and Internet monitoring software on it.
There are three vlans on it. It is working great. If you need more info
email me offline.
Neil
""Scott Nelson"" <[EMAIL PROTECTED]> wrote in message
9a580l$a2n$[EMAIL PROTECTED]">news:9a580l$a2n$[EMAIL PROTECTED]...
> OK, h
I have a IBM 8228 MAU. What is the easiest/fastest way to test each port
including the RI RO? What is the fastest way to test type 1 cables? I
have this thing that has the type connector on one end. It's about 3
inches long and has a red LED. What is it called and what is it for? I
looke
I made a boo boo. I thought I had an 8MB Flash since that was what I had
bought but I did some testing and it turned out to be 4MB. When I had an
8MB flash in slot0 and a 4MB in slot1 the show flash thinks it's
16MB. That's what confused me. And when I put the 4MB in slot0 it
registered co
Sean Young writes:
> I would like to be able to make both users abc and xyz to be
> able to go into the privilege mode (enable) each with their
> own password. Right now, even though abc and xyz can
> access the NAS, they have to share the enable secret
> password which is something I like to a
d:
i did not look ar the question properly
Pedro Quezada wrote:
> c
>
> KOLIY wrote:
>
> > A router is receiving update for 1 subnet from different routing protocol.
> > Th system administrator wishes to take advantage of a path via a route
> > with less administer distance.Should I use ?
> > a.
To:<[EMAIL PROTECTED]>
Whoever you are, you are using my name. Please discontinue doing this as
this is not ethical.
I hope that you made a mistake and is not playing games with me and the
ciscogroupstudy.com.
Arthur C. Simplina
"Arthur Simplina" <[EMAIL PROTECTED]> wrote in message
[EMAI
Can I be confused now?
Arthur Simplina wrote:
>
> To:<[EMAIL PROTECTED]>
>
> Whoever you are, you are using my name. Please discontinue doing this as
> this is not ethical.
>
> I hope that you made a mistake and is not playing games with me and the
> ciscogroupstudy.com.
>
> Arthur C. Si
Pls write to me when you want to exchange.
Natasha <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Can I be confused now?
>
> Arthur Simplina wrote:
> >
> > To:<[EMAIL PROTECTED]>
> >
> > Whoever you are, you are using my name. Please discontinue doing this
as
remember also- the AGS will not allow you to configure clockrate unless you
physically have a cable connected to the interface.
Something I learned after hours with my old AGS one evening
Phil
- Original Message -
From: "Marty Hawley" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>; <[EMAIL
this is my associate at work...and i am proud to work with such an
accomplished gentlemanmcse..mcda..mcne..ccna..you name it
good luck mel..
>From: "Mel Chandler" >Reply-To: "Mel Chandler" >To: [EMAIL PROTECTED]
>Subject: Re: NTP Question? >Date: Fri, 30 Mar 2001 14:19:09 -0800
>X-Origin
Hey Group,
I just got my Teltone ISDN simulator in the mail, but I can't seem to get it
working. The simulator, by default, is setup to use Basic-ni1. I connected
both of my routers directly to the simulator using straight-through cat5
cables. I then typed no shut on the bri0 interfaces and s
Hi all
Does anyone have idea where I find the site related for
1) T3 Frame --> line coding, payload scramble, frame type
2) E3 Frame --> line coding, payload scramble, frame type
Thanks in advance
Regards
Sipitung
_
FAQ, list archives, and subscription info:
Fred,
My first question would be which model did you get? The ILS 2000
comes with support for both U and ST BRI interfaces, whereas the
Demonstrator only supports the U interface. What does this mean...?
You'll need two NT1's in order to make your connection if this is the case.
HTH
N
Does any one know the cheapest online computer book
seller?
Thank you
__
Do You Yahoo!?
Get email at your own domain with Yahoo! Mail.
http://personal.mail.yahoo.com/?.refer=text
_
FAQ, list archives, and subscriptio
62 matches
Mail list logo