I think that you need both. The Doyle's book to understand the concepts and
the Cisco Press to prepare for the test.
Edmundo
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=32032&t=31974
--
FAQ, list archives, and subscription inf
By the way I see the 1605 R may be what I'm looking for ,Does anyone know if
it would handle the BGP requirement below? We average 4MB/s input traffic
with our current load, I wonder if this router could handle it.
""sam sneed"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> He
hey there
the ATM lane is there in the exam. am gonna take up the xam on 22nd. pretty
sure atm lane is there
bye
venu gopal.metla
ccna,ccda
hyd
-
This mail helped a tree grow. Know more at http://green.sify.com
Take the shortest route to success!
I'm interested Brad.
-Original Message-
From: Brad Ellis [mailto:[EMAIL PROTECTED]]
Sent: Monday, January 14, 2002 3:32 PM
To: [EMAIL PROTECTED]
Subject: Custom Telnet Application [7:31889]
Would anyone be interested in using a custom telnet application that has
some built-in macros? (
Hello,
I have a question I hope someone maybe able to help me with. I have a
setup that will be in a data center. They are giving us two handoffs a
primary and shadow on 2 distinct subnets. These will be ethernet
connections.I would like to use 2 routers running HSRP for our servers
inside our
I believe it is. I did it once with a tool that downloaded the config as
long as you had the correct RW community string, made the changes and sent
it back up.
--
RFC 1149 Compliant.
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nond
Hello,
Is it possible to copy a new config to a router via snmp. I configured and
sent a router to the field with a mistyped secret password. The current
configuration has a RW snmp community set. I currently use snmp to pull down
the configurations to tftp from the routers and was hoping I could
interesting question. came up in a customer meeting the other day as well.
IMHO, this gets down to design preference. I am of the school of thought
that there needs be some way of getting to any router in a network ( design
permitting, cost permitting ), and that each router in a network needs so
Guys,
I've noticed that on the official exam blueprint there is no mention of
ATM LANE.
But the Cisco CCNP Switching Exam Certi?cation Guide book from Cisco
Press has an entire chapter on it.
I know that it's maybe better for me to learn it anyway, but maybe I can
concentrate on more relevant th
Fraasch James wrote:
>
> First, thanks for all the information. I forgot to mention
> that when I did a Show ip int brief I saw up and up. Next, here
> is some pertinent configuration information:
>
> Interface Serial 2/5
>mtu 2044
>ip address 172.25.x.x 255.255.255.252
>encapsulati
Hi,
Is there reason one would prefer loopback address for router ID when using
Ospf over the router id command that can be used under "router ospf " and
vice versa. Is there a need to advertise the router IDs in OSPF.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=32022&t=32
""Edmundo Bodero"" wrote in message
> I used A and Jeff Doyle's Volume I to pass the exam.
Is Jeff Doyle's Volume I enough or do you need also the BSCN book?
(except BGP of course)
Regards
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=32021&t=31974
--
The MC3810 does support VoIP. To do so, you must have an "IP Plus" IOS
image, along with the associated NetModules for connectivity to whatever
you're terminating with. For your specific application, I think you might
be looking for a T1-MultiFlex Trunk. Do a search on Cisco.com a.k.a. CCO
and
Is Mentor back in business? web site is not there.
The news this morning is that a company called Element K has purchased the
Vlab technology, and will be marketing the labs.
Point to note - in terms of Mentor, Vlabs was an asset, people who bought
services were creditors. The bankruptcy court w
We are having no problems using the following:
Cisco 3620 with 12.2(5) IP only.
Cisco 5000 VPN concentrator (running 6. something)
Cisco VPN client 5.17
I have both static NATs and a pool enabled.
Keep in mind that with NAT trans VPN stuff goes out over TCP 80 and comes
back on UDP 500(OK more
Paul Borghese wrote:
>
> You should be able to use the QUOTE button on the website to to
> quote the
> message. Please tell me if this is broken as I have been
> upgrading the
> internals of the website and may have missed a bug.
>
> Thanks!
>
> Paul
Paul,
You just can't teach us newbies an
Echo on a digital phone (analog for that matter as well) is usually
intentionally created, but it shouldn't be noticeable. It's called comfort
noise, so that you can hear yourself talking in the earpiece. Tests have
shown that people who can't hear themselves in the earpiece think it's
broken.
David,
If you point a routers GLR to its interface, the router will issue an arp
request for any destination that is unknown, even devices that are not on a
connected segment. (this is the same behavior that most host OSes exhibit if
you point their DG to their own IP) For this to work, you must
First, thanks for all the information. I forgot to mention that when I did
a Show ip int brief I saw up and up. Next, here is some pertinent
configuration information:
Interface Serial 2/5
mtu 2044
ip address 172.25.x.x 255.255.255.252
encapsulation ppp
ipx network B051
ipx update
Anyone know of a utlilty that can check against a vpn connection? I dont
users that VPN in (3005) to run our corporate login script. Any ideas are
appreciated. Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=32013&t=32013
>Unfortunately I can't find a debug to tell that my Hellos are >multicast
>rather than unicast. I guess I'll have to wait until Priscilla >ponies up
the
>$ for a WAN sniffer. :)
Chris,
Since you are in a lab environment, you can turn on 'debug ip packet' and
see the destination address of 224.
You should be able to use the QUOTE button on the website to to quote the
message. Please tell me if this is broken as I have been upgrading the
internals of the website and may have missed a bug.
Thanks!
Paul
- Original Message -
From: "s vermill"
To:
Sent: Tuesday, January 15, 2002
I do know of an exception when it comes to the 12000 series GSRs. You can
use the:
show gsr chassis-info
It lists the Chassis type, Chassis Serial Number, Hardware revision and even
the Backplane Serial Number. I'm not sure what other platforms support this
command if any.
Chris
-Original
Count me in. Thanks.
Fred
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/web/.
Message Posted at:
http://www.group
Priscilla,
My apologies for the inaccuracy. Indeed, on a Serial link (point-to-point)
the neighbor state does advance to FULL. Not stopping at 2-way as I had
suggested. I config'd my lab quickly this morning for point-to-point, below
are some snapshots:
Neighbor ID Pri State Dead
We are using static NATs, no pooling.
-Original Message-
From: Patrick Ramsey [mailto:[EMAIL PROTECTED]]
Sent: Monday, January 14, 2002 4:24 PM
To: [EMAIL PROTECTED]
Subject: NAT Problems with 12.2(5)? RE: Gawd I hate my life [7:31883]
Does this have anythign to do with the wrong nat p
3600's, mostly 3662's
-Original Message-
From: R. Benjamin Kessler [mailto:[EMAIL PROTECTED]]
Sent: Monday, January 14, 2002 5:19 PM
To: [EMAIL PROTECTED]
Subject: RE: NAT Problems with 12.2(5)? RE: Gawd I hate my [7:31913]
What platform? I was doing a bug search for 7200's and saw se
We're on a 3660 here.
>>> "R. Benjamin Kessler" 01/14/02 05:19PM >>>
What platform? I was doing a bug search for 7200's and saw several NAT
bugs - some of which are unresolved.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Patrick Ramsey
Sent: Monday
I'm interested. Thanks Mark
[EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Ben Liang Tan
Sent: Tuesday, January 15, 2002 8:18 AM
To: [EMAIL PROTECTED]
Subject: Re: Custom Telnet Application [7:31889]
I'm more than interested. Thanks
Hi
Does any body lnow if CISCO mc3810 support voip using h323 protocol, if so,
with wich IOS does Cisco mc3810 works with VoIP. what do i have to do to make
tha a CISCO mc3810 works as a gateway in VoIP, i mean that my CISCO must be a
bridge between PSTN and the IP Cloud.
Regards
Message Pos
I have been told that the reason we are hearing echo on our phones on
internal phone calls (ip phone to ip phone) is that the ip phones processor
is getting overloaded. That the echo is really coming from the phone
itself. I have limited knowledge on this subject so any help or suggestions
on ho
I understand the gateway of last resort to be the destination of where the
traffic should be forwarded. Hence gateway, not "local interface of last
resort" :)
It really dosen't matter if on a point-to-point network, because you'd
forward the traffic out the interface and the other side would pi
After I type debup ip icmp I've got this.Why is the source address 0.0.0.0 ?
1w0d: IP: s=0.0.0.0 (FastEthernet0/0), d=255.255.255.255, len 328, rcvd 2
Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=32005&t=32005
--
FAQ,
I sense much 11.0 in you...
11.0 leads to crashes...
crashes leads to downtime...
Downtime leads to suffering...
11.0 is the path to the darkside...
Powerful 12.6 is...
Robert Fowler
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=32003&t=32003
-
Sure but I don't think I would go and redistribute them. You may want
to consider setting up two HSRP groups. That way you could utilize both
routers and have redundancy between the two default routers.
A better understanding of your topology would be insightful.
Dave
Scott wrote:
>
> I
>Well, that does make sense, now that you mention it. (OSPF sending
>multicast Hellos on a serial interface). OSPF uses Hellos as a >keepalive,
>not just for establishing adjacencies.
>Notice, that your reply is still hard to read because we can't tell >what
>you wrote and what I wrote. But i
I was under the impressions that the gateway of last resort was a actual
interface on the router. if a router had two interfaces one 10.1.1.1/16 and
10.1.2.1/16 and 10.1.2.1 was connected to a firewall that has a address of
10.1.2.2 that the gateway of last resort would be 10.1.2.1 not 10.1.2.2 an
Hello,
version 12.1(3) is fine, as long as you use one of the following (this is
from the Cisco Feature Navigator):
IP PLUS IPSEC 3DES c1700-k2sy-mz.12.1-3 (24/8)
IP PLUS IPSEC 56 c1700-sy56i-mz.12.1-3 (20/8)
IP PLUS c1700-sy-mz.12.1-3 (20/4)
IP/FW/IDS PLUS IPSEC 3DES c1700-k2o3sy-mz.12.
how can i configure multiple silmultaneous RADIUS servers to receive
accountign packets
on cisco 5400
Mohamed Saro
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=31995&t=31995
--
FAQ, list archives, and subscription info: http:
I have a 6509 with a MSFC, which it is divided into 2 VLAN, say VLAN4 and
VLAN5. There is a server in VLAN4 and some clients PC in VLAN5, which the
clients find the server by IP mulitcast. I have enabled IGMP in both 6509
and the route module, enabled "IP Multicast-routing" in the route module. I
This just came up with a client that has a bunch or remote sites... all NAT
and coming
into the same remote box. This link helped a little.
http://www.cisco.com/warp/public/707/same-ip.html
hth
ipguru
"Ali, Abbas" wrote:
> I have a 525 PIX and running normal configuration. Inside network i
By default there is no way to get the actual router serial number from
the command line. There are ways to display certain serial numbers
associated with that device, but it is not the chassis serial number
you're seeing.
One solution--which doesn't help you now--is to set the snmp chassis-ID
in
I have A and B. I used A and Jeff Doyle's Volume I to pass the exam. I never
opened B.
Edmundo
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=31990&t=31974
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/
You also need a nm with a fast eth interface.
-Original Message-
From: Craig Columbus [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, January 15, 2002 8:02 AM
To: [EMAIL PROTECTED]
Subject: Re: Help !! 3620 + NM-1E2W + WIC-2T = trouble [7:31976]
According to Cisco's HW/SW compatibility matrix
You need the IP Plus image.
HTH
Dom Stocqueler
"tmjf.com"
cc:
Sent by: Subject: 17
i was wondering if anyone out there could offer me some advice. i want to
nat via a gateway. instead of nating, say, 66.89.59.100 to 192.168.2.100
and vice versa, is it possible to nat 66.89.59.100 to a gateway,
192.168.2.1, with the destination of 192.168.2.100? i'm trying to do
something like
I'm more than interested. Thanks Brad.
>From: "Brad Ellis"
>Reply-To: "Brad Ellis"
>To: [EMAIL PROTECTED]
>Subject: Custom Telnet Application [7:31889]
>Date: Mon, 14 Jan 2002 15:31:35 -0500
>
>Would anyone be interested in using a custom telnet application that has
>some built-in macros? (sh
Layer 2 on the Catalyst 5000, but you may have to trunk with an external
router and route VLANs.
Marc Russell
www.ccbootcamp.com
""Firesox"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Do they have Cat5K with L3 functionality on CCIE R/S lab or it is strictly
> L2?
> Thank
I used A & B plus ExamCram, Cramsession, and Boson.
--
"Through Complexity there is Simplicity,
Through Simplicity there is Complexity"
David L. Blair - CCNP, CCNA, MCSE, CBE, A+, 3Wizard
""Cisco Fire"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTEC
According to Cisco's HW/SW compatibility matrix, you need one of the
following IOS versions to support a WIC-2T on a 3620:
12.0(7)XK, 12.1(1)T, 12.1(5)YB, 12.2(1), 12.2(2)T, 12.2(2)XT
Don't assume that if you try a later version of IOS that it's definitely
going to support your card. Try to g
Does anyone know of the IOS version for 1720 that can run BGP? I'm currently
using IOS Version 12.1(3)
Thanks!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=31984&t=31984
--
FAQ, list archives, and subscription info: http://ww
You guys are great and saved me a ton of time!
have a great day!
"tmjf.com" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I have a 3620 with 64 MB RAM 16 MB Flash. I installed module NM-1E2W and
it
> works fine, but when I install the
> WIC-2T in either WAN slots it doesn't r
> I have a 3620 with 64 MB RAM 16 MB Flash. I installed module NM-1E2W and
it
> works fine, but when I install the
> WIC-2T in either WAN slots it doesn't recognize it. The WIC-2T works on my
> 1720 and 2610. I've tried 2 different IOS already
> (IOS 12.2 Enterprise Plus IPSec 56 and 12.1 IP Plus
Hi,
WIC-2T is supported on 3660/3640/3620 if the following modules
are installed on the 3660/3640/3620:
NM-1FE2W,NM-1FE1R2W,NM-2FE2W,and NM-2W
WIC-2T is not supported on the following modules on 3660/3640/3620:
NM-1E2W, NM-1E1R2W,and NM-2E2W
Regards,
Georg
Message Posted at:
http://www.g
>From Cisco's web site, it doesn't look like the WIC-2T is supported in
the NM-1E2W. The doc on the WIC-2T only lists the following:
NM-1FE1R2W
NM-1FE2W
NM-2FE2W
NM-2W
The same doc says that the WIC-2T isn't supported in the following:
Cisco 1600
NM-1E2W
NM-1E1R2W
NM-2E2W
Sorry.
-Original
Hello Firesox,
I would go to www.cisco.com/go/fn and use the Feature Navigator to find what
you need. There are so many releases that it is hard to keep track. This
tool is quite useful. Good luck.
Regards,
Georg
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=31979&t=31978
-
Does anyone know which feature set you need to run DHCP server on 1605R? I
still cannot find one that does dhcp. They don't have Enterprise IOS for
1605R.
Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=31978&t=31978
--
You dont choose to boot from network tftp (which can be pain in the butt
sometimes, but helpful) I have a few 8 MB Flash modules for 2600 series, let
me know if you're interested.
Thanks!
"qin jonson" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> the issue?
>
> Hi,everybody.
I have a 3620 with 64 MB RAM 16 MB Flash. I installed module NM-1E2W and it
works fine, but when I install the
WIC-2T in either WAN slots it doesn't recognize it. The WIC-2T works on my
1720 and 2610. I've tried 2 different IOS already
(IOS 12.2 Enterprise Plus IPSec 56 and 12.1 IP Plus IPSEC 56).
Ben, I'm afraid that when I answered your post it was already buried under
tons of other post. I'm sorry, these are the consequences of living in
Europe...:->
Anyway, thanks for your detailed answer, I hope to get more detailed
specifications (CPU, memory,...) asap, but by now I have only said the
Haye Friends,
Just wanted your help in taking a right decision.
I m planning to take the Routing exam (Exam no. 503)
Which is the best book for study ? WHICH BOOK SHOULD I BUY ?
a. BSCN by Catherine Paquet / Diane Teare
b. EXam Certification Guide by Clare Gough
c. Study guide by To
Rent the lab on EST or GMT
1-15th 7am EST
16-31st 7am GMT
We will accormodate differnt time zone lab rental (Please e-mail us for more
details)
Lab Rental for $65.00 at www.practicelabs.net
Please take advantage of our introductory offer of buy-one 1/2 day get the
second FREE.
Our Rack is ph
Isn't this the group that went bankrupt and took money with them from lots
of students for classes they paid for? There were lots of posts from angry
students here a bit ago, I wonder if their concerns have been address since
mentor is now back in business?
Message Posted at:
http://www.groupstu
Hello All,
I've been searching for the acceptable amount of Db loss for multimode fiber
run. I've found a variety of information on core diameter, operating
wavelength and fiber installation. I've also read TIA/EIA-568-A and TSB-72,
standards for Centralized Fiber Cabling Guidelines. These doc
I am a CCNP and I am heading toward the CCIE. I think it is good to take
CCDP as a preparation for the CCIE. Instead of reading only for the CID exam
I read the recommended design books for the CCIE in addition to the material
for the CID.
Regards
Jon Gudmundsson
-Original Message-
From:
boot from network tftp server
or...
upgrade to 16M flash
""qin jonson"" P4HkO{O"PBNE
:[EMAIL PROTECTED]
> the issue?
>
> Hi,everybody.
>
> Hope to seek some advise on TFTP a bigger flash to flahs.
>
> Now I have a 2611 router.I want to upload 2600-js-mz-121.6.bin
>
> to router's flash.But
101 - 166 of 166 matches
Mail list logo
