Dear All,
I have a very stupit quesrtion here. How am i by pass the proxy and route
direct to the router. Pls comment !!
Below is my diagram.
169.168.4.2/16 (my pc) - router (192.168.161.254/16)--Leased
Line 64k--router (192.167.161.254/16)Proxy
You can use the routers back to back with the v.35 cables..CCO has
A write-up on back-back frame connections..or buy an 8 port serial
Router...
Larry Letterman
Cisco Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Devraj, Prem
Sent: Monday,
Congrats on your new venture. Best of luck.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=75029t=75029
--
**Please support GroupStudy by purchasing from the GroupStudy Store:
http://shop.groupstudy.com
FAQ, list archives, and
Hi all,
I started off studying routing and found it to be a topic that interested me
a lot. I just couldn't get enough of halabi Doyle and the rest. I studied a
lot, practiced a lot and was thrilled when I passed the exam in beta.
Next I started studying for switching. That didn't turn out as
Your mail seems to contain an attachment type which we don't allow for
security reasons.
If you need to deliver the file, please remove your attachment and email the
person you're trying to reach to arrange for alternative delivery method.
You might also run some anti-virus software on your
Your message
To: [EMAIL PROTECTED]
Subject: Re: Approved
Sent:Mon, 8 Sep 2003 21:42:10 -0500
did not reach the following recipient(s):
c=US;a= ;p=PROVANT;o=STAR?MOUNTAIN;dda:[EMAIL PROTECTED]; on Tue, 9 Sep
2003 02:58:13 -0500
The recipient name is not recognized
The
Kennedy Clark's book for lan Switching for CCIE...
Larry Letterman
Cisco Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Nakul Malik
Sent: Monday, September 08, 2003 11:31 PM
To: [EMAIL PROTECTED]
Subject: Studying Switching [7:75030]
Hi
Devrim Yener KUCUK wrote:
what do you see when you do sh dialer on the calling router, as a dial
reason?
or debug dialer, debug isdn q931 will be telling you
And sh ip ospf stat will show you activity of OSPF - remember that every
change in OSPF
topology can trigger dialer.
--
EC
Message
ApiNG wrote:
Hi ALL, Can someone help me to solve this problem pls (Urgent)?
i found to many error on cisco cat 4506 and 4503, about Hostflapping.
The following is an example of the console output (with sh log command):
4d23h: %C4K_EBM-4-HOSTFLAPPING: Host 00:10:4B:1B:4D:E4 in vlan 1 is
Elijah Savage wrote:
I have actually been told by TAC before IP Input, for what it is worth
:)
Not much, anymore :-). It's been a *long* time (IOS 10.x?) since access
lists were process switched, and thus would show up as extra time spent
in 'IP Input'.
Regards,
I've been working toward my CCNP for sometime. But Cisco have changed the
exams twice recently.
As my CCNA is only valid until Dec 6th this year, does this mean I'll have
to do it all over again ??
Thx
Tim
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=75044t=75044
Hi Larry,
I want to connect 8 port for a LAB Scenario which I have. I was thinking of
buying a 2522, I was just wondering if anyone has any better ideas then
buying this 2522
Thanks
prem
-Original Message-
From: Larry Letterman [mailto:[EMAIL PROTECTED]
Sent: 2003 9 9 14:27
To:
nope, you can mix and match old and new ccnp exams
- Original Message -
From:
To:
Sent: Tuesday, September 09, 2003 5:31 PM
Subject: RE: CCNP exam changes.. [7:75044]
I've been working toward my CCNP for sometime. But Cisco have changed the
exams twice recently.
As my CCNA is
Hi all,
I am a new guy in Cisco world, before asking, I would like to explain
about my network :
1. I have 8540 as ATM switch with DS-3 port and will be connected via
ATM OC12 to other equipments (2 x 7500 series)
Since there will be more bandwidth consumption for ATM (payload/ATM
cell), so I
I just started my routing class for my CCNP. We are covering CIDR. The
book is VEERY vague on how the bit patterns break down and are used.
This was a problem posed in one of my CCNP labs
I have network number
192.168.24.0 / 22
from this I need
networks with
400 hosts
200 hosts
50
Hi
I'm trying to do policy based routing on a FE subinterface on a 7200 and am
having problems at present, i.e. not working. I'm not sure if the router
doesn't do PBR on subinterfaces or if I need a newer IOS version. I'm
currently running 12.0.15.S3
Any help appreciated.
Best regards
Malcolm
Hello Nakul, I had the same problem when studying for the Switching exam.
I don't like switches. I know that routers and switching are two different
devices and perform different functions, but routers make switches look
stupid. I guess that they are two different colors.
If you are trying to
I have network number
192.168.24.0 / 22
from this I need
networks with
400 hosts
200 hosts
50 hosts
50 hosts
2 hosts (for serial int - no ip un-numbered allowed )
2 hosts
2 hosts
192.168.24.0/23 - 512 (400 hosts fit nicely)
192.168.26.0/24 - 256 (200 hosts fit nicely)
line aux 0
exec-timeout 0 0
modem InOut
What about
modem out?
Martijn
-Oorspronkelijk bericht-
Van: Robert Perez [mailto:[EMAIL PROTECTED]
Verzonden: vrijdag 5 september 2003 17:49
Aan: [EMAIL PROTECTED]
Onderwerp: Aux port and modem connectivity [7:74909]
Guys,
If I have a
Let me give you a bit of a clue -
For the 400 hosts you will need a /23
200 hosts you will need a /24
50 hosts you will need a /26
50 hosts you will need another /26
2 hosts (for serial int - no ip un-numbered allowed )and for these you
will need /30s (/32s are possible but probably not what
I have the following list of equipment for sale!!
5 Cisco 2501
2 Cisco 2503
1 Cisco 2523
1 Cisco 2509
1 Cisco 2511
1 Cisco 2514
2 Cisco 2620
1 Cisco 4500
1 Cisco 3550 w/Emi
1 Teltone isdn simulator
Please let me know if your are interested and they
pretty negotiable.
Depends what you are trying to accomplish. If it's for your PC, then just
changed your default gateway to point to your internet router instead of the
proxy (going off your active route list and not your little diagram which
looks like it has some issues). There's probably quite a bit of
I get the same results as Marko, but this may lay it out so you (and
others) can see the development:
IP address = 32 bits
Network portion = 22 bits
Host portion = 10 bits
Total addresses for host portion = 2^10 = 1024
Start with 192.168.24.0/22
Focus on the 3rd octet (network_host): 000110_00
No offense, but this is CCNA material. If you are going for your CCNP, then
you should already have your CCNA and know the answer. But anyway...
If you need a network with 400 hosts, the smallest subnet would have a /23
mask. So take the first part of your given network and assign it to that:
I don't get any response when configuring a 2500 series router (no key
strokes) through Hyper Terminal, 3 2500's doing the same thing. When I
restart the router by resetting it I can see the boot process fine. Any
ideas?
Thanks in advance.
This e-mail may contain confidential information and
Nakul,
Hi! If you really want to learn about switching, I'd recommend picking up a
couple of switches and learning hands-on. It will give you a chance to
play around with different configurations. If you've got the bux, go with a
couple of 3550s (it'll pay off after you finish CCNP and go for
Hi, guys:
Why not consider 2523 i/o 2522 ?
In the hardware spec, Cisco 2523 is the same as 2522, all the difference is
2523 is Token-Ring based,
In eBay, you could find out that R2523 is cheaper than R2522,
For the cost issues, I would suggest the 2523.
If the cost/price is not the issues,
Sure, you could use an older 7000 series router with 8 serial interfaces.
You could also use a 2523. there is also a module for 26xx/36xx routers
called an NM-8A/S which would also work. However the best solution is a
2522 or 2523. Old 7000 series routers are really big, extremely loud, and
use
hi all,
selling my ccie lab equipment ...
will accept offers from germany/europe because I'm located in germany
(munich)
the equipment is used only a couple of days and can be regarded as
new(except of the 2503 and cat2901)
pls make offers via email
thanks
monti
R1: 2610(16/48) 1 eth , WIC-2T
Here's a great resource:
pad
http://www.nanog.org/isp.html#cidr
scroll down to CIDR and download Understanding IP Addressing: Everything
You Ever Wanted to Know by Chuck Semeria
Looking at your specific problem - think in powers of two. 400 nodes is
greater than 256 but less than 512. Use /23 out
The fix was to implement the statement ats0=0 (causes the modem to never
answer) in the modemcap entry or chatscript. I like the modemcap entry the
best..
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Tuesday, September 09, 2003 9:15 AM
To: [EMAIL PROTECTED]
If you're trying to use the modular QoS CLI on subinterfaces its
something of a mess - you have to create 'backpressure' at the physical
interface level so bandwidth available is less than what your policy
needs, or everything stays FIFO.
I had a production network with this issue and I
Good-Afternoon everyone,
I am preparing for the 9E0-600 exam, but am battling to gather comprehensive
study material.
I have been able to obtain relevant product documentation from Cisco's
website, but am finding it difficult to get through. If anyone has any
suggestions as to where I can
M.C. van den Bovenkamp wrote:
Elijah Savage wrote:
I have actually been told by TAC before IP Input, for what it
is worth
:)
Not much, anymore :-). It's been a *long* time (IOS 10.x?)
since access
lists were process switched, and thus would show up as extra
time spent
in 'IP
If you have flow control turned on, turn it off. What are your other
terminal settings? For the 2500 series I believe you should be set to 9600,
8-bit, No parity, 1 stop bit. Some Cisco devices request that you use two
stop bits so you might try that as well, but my guess is that it's a flow
Woops, one of the ranges is wrong. Should be
192.168.27.64/26 (192.168.27.64-192.168.27.127)
and not:
192.168.27.64/26 (192.168.27.64-192.168.27.191)
like I said. Given that you could move all of the latter subnets up, or
leave open 192.168.27.128 for another /26 subnet.
Fred Reimer - CCNA
Get a copy of Cisco LAN Switching by Kennedy Clark and Kevin Hamilton. It's
right up there with Doyle as one of the best networking books ever written.
It makes switching fun again! ;-) It's well written, technicaly accurate and
interesting, and it doesn't just throw the latest marketing trends at
I think I was over looking something very simple. CLASS-LESS! If I
understand things correctly. If I have 10 bits for my host section I
have a total of 1024 hosts. What I was stuck on is liner break down
dividing subnets in factors of 2. But ( here was my mistake ) by powers
of 2, I'm not
Group,
I'm planning on purchasing my final addition to my RS home lab sometime
this month. I'm having a hard time deciding if I should add another 3550
(I have one already) or if I should pick up a Lightstream 1010 with two
4500s that have an OC3 MM interface. ATM for the 3600s is way too
Any one know of a good network monitor prog.? It doesn't have to be
free but not to expensive. My budget is nill. Any recomendations?
Thanks,
Steve
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=75081t=75081
--
**Please
Reimer, Fred wrote:
No offense, but this is CCNA material.
Do they still teach classful for CCNA, though? Perhaps the only thing that's
hard for him is that 192.168.24.0 has a mask of 255.255.255.0 in a classful
system. Moving the prefix over to the left of that classful boundary isn't
Well, remember that same software sometimes run on different hardware
platforms that could have different speed capabilities. The fact that you
don't see it doesn't mean is not used.
Aurelian Georgescu
-Original Message-
From: softmap [mailto:[EMAIL PROTECTED]
Sent: Tuesday, September
Priscilla Oppenheimer wrote:
Reimer, Fred wrote:
No offense, but this is CCNA material.
Do they still teach classful for CCNA, though? Perhaps the only thing
that's
hard for him is that 192.168.24.0 has a mask of 255.255.255.0 in a classful
system. Moving the prefix over to the left of
Any one know a good free subnet calc. After realizing how many break
downs, and how many subnetworks you would have to figure for CIDR, I
would rather not do it with pan and paper. Free is good, for the calc.
cost.
Steve
Message Posted at:
I was stuck on the idea that you could ONLY re subnet a remaining piece
of a subnetwork. And not apply a mask to the whole span of the total
available network. You can (unless I'm incorrect here) you just have to
watch out for address over lap neer your subnetwork boundries.
I think I got
Hi. This is the qmail-send program at mx4.jmail.co.jp.
I'm afraid I wasn't able to deliver your message to the following addresses.
This is a permanent error; I've given up. Sorry it didn't work out.
:
Sorry, no mailbox here by that name. (#5.1.1)
--- Below this line is a copy of the message.
www.solarwinds.net
Steven Aiello wrote in message
news:[EMAIL PROTECTED]
Any one know of a good network monitor prog.? It doesn't have to be
free but not to expensive. My budget is nill. Any recomendations?
Thanks,
Steve
**Please support GroupStudy by purchasing from the GroupStudy
Steven Aiello 9/9/03 11:18:51 AM
Any one know of a good network monitor prog.? It doesn't have to be
free but not to expensive. My budget is nill. Any recomendations?
Thanks,
Steve
Wouldn't it _have_ to be free if your budget is nil? ;-) You might want to
check out MRTG and WhatsUp Gold:
Priscilla,
Didn't Radia write a poem that starts something like
I have never seen a tree as lovely as a spanning tree?
BTW, is it still possible to get a free copy of 802.1s w.
I looked on the IEEE site but couldn't find them.
Prof. Tom Lisa, CCAI
Community College of Southern Nevada
Cisco
May be I had advanced access to the new NA material then ;-) In my view, a
NA should be able to handle basic RIP, OSPF, EIGRP in a small to medium
sized network. That would certainly include CIDR. A NP, IMO, would be for
advanced RIP, OSPF, EIGRP, and basic BGP, like for configuring a mid-large
The key is that you must completely unlearn classful thinking. Forget that
you ever learned it. Completely ignore any prior classful subnet boundaries
that you were forced to memorize. It's all just one big IP address space
that you choose to carve up any way you like. As long as you do it
Priscilla Oppenheimer wrote:
Yes, that's true indeed that access lists don't cause process switching
anymore, so wouldn't show up in IP Input.
Two exceptions that I failed to mention are logging and the side effect
of a deny. By default, a deny causes the generation of an ICMP admin.
Boson test have a free one..
Larry Letterman
Cisco Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Steven Aiello
Sent: Tuesday, September 09, 2003 10:15 AM
To: [EMAIL PROTECTED]
Subject: IP Subnet calc. [7:75085]
Any one know a good free
If you want to do more than j/a frame switch, than a 7000 would be ideal.
Fast ethernet, atm, and frame-relay switch all in one.
- Original Message -
From: Devraj, Prem
To:
Sent: Tuesday, September 09, 2003 4:49 AM
Subject: RE: Frame Relay Switch [7:75019]
Hi Larry,
I want to
page 58, Interconnections, 2e
Algorhyme
I think that I shall never see
A graph more lovely than a tree.
A tree whose crucial property
Is loop-free connectivity.
A tree that must be sure to span
So packets can reach every LAN.
Firest, the root must be selected.
By ID, it is elected.
From what you say, I think you have it, but I'm not sure. Starting from the
bottom of a /24 subnet (Class C), you could have a /26 subnet, then two /27
subnets, then four /28 subnets, and finally another /26 subnet. Or you
could have two /28 subnets, one /27 subnet, one /26 subnet, followed by a
Free Trial, $59 to buy.
http://www.networkview.com/
-Evan
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
John Neiberger
Sent: Tuesday, September 09, 2003 1:44 PM
To: [EMAIL PROTECTED]
Subject: Re: Good network monitor prog. ??? [7:75081]
Steven Aiello
Steven Aiello wrote in message ...
Any one know of a good network monitor prog.? It doesn't have to be
free but not to expensive. My budget is nill. Any recomendations?
unix-based free / open-source:
netsaint, nagios, zabbix, rtg, rt-snmp (ticketing system with snmp hooks),
jffnms,
This one's not bad ... and the price is right
http://www.solarwinds.net/Tools/Free_tools/Subnet_Calc/
Steven Aiello wrote:
Any one know a good free subnet calc. After realizing how many break
downs, and how many subnetworks you would have to figure for CIDR, I
would rather not do it with
Hello,Can some help me figure out once and for all what this requirement
means: Configure so that ONLY R5 places a call R5 is the remote router
and R1 the hub router. This is what I thought I understood regarding the
above requirement. Only configure the dialer map statement on the remote
side NOT
Tom Lisa wrote:
Priscilla,
Didn't Radia write a poem that starts something like
I have never seen a tree as lovely as a spanning tree?
BTW, is it still possible to get a free copy of 802.1s w.
I looked on the IEEE site but couldn't find them.
Sure you can still get them for free. You
www.solarwinds.net has a nice one.
At 05:15 PM 9/9/2003 +, Steven Aiello wrote:
Any one know a good free subnet calc. After realizing how many break
downs, and how many subnetworks you would have to figure for CIDR, I
would rather not do it with pan and paper. Free is good, for the calc.
Reimer, Fred wrote in message
news:[EMAIL PROTECTED]
May be I had advanced access to the new NA material then ;-) In my view,
a
NA should be able to handle basic RIP, OSPF, EIGRP in a small to medium
sized network. That would certainly include CIDR. A NP, IMO, would be
for
advanced RIP,
Don't feel bad, I have spent time trying to figure out why no layer 3
connectivity only to realize I was working w/old IOS that did not have no
ip classless by default
Steven Aiello wrote in message
news:[EMAIL PROTECTED]
I think I was over looking something very simple. CLASS-LESS! If I
We are now teaching VLSM/CIDR in the CCNA curriculum.
Prof. Tom Lisa, CCAI
Community College of Southern Nevada
Cisco ATC/Regional Networking Academy
Cunctando restituit rem
Priscilla Oppenheimer wrote:
Reimer, Fred wrote:
No offense, but this is CCNA material.
Do they still teach
Group,
I'm planning on purchasing my final addition to my RS home lab sometime
this month. I'm having a hard time deciding if I should add another 3550
(I have one already) or if I should pick up a Lightstream 1010 with two
4500s that have an OC3 MM interface. ATM for the 3600s is way too
It might be helpful if you could describe what you want to monitor. For
utilization MRTG works well, and it's free, though it's a bit strange to set
up the first time through. Also, Solarwinds is pretty inexpensive, and does
utilization and other router/switch stats (CPU, memory, errors, etc..)
Surprise...it depends. If you're looking for something to monitor and
graph things like bandwidth, cpu and memory for a couple hundred targets
so MRTG is perfect. Since it is Perl based MRTG is available for most
platforms.
If you also want to monitor up/down status, Windows/Unix/Netware
Steven,
There's a great little program on SourceForge that's growing
in popularity and IMHO is going to become a great NMS tool. It Integrates
Syslog, Tacacs, RRDtool (Performance Graphs), Maps, Traps, TFTP,
Autodiscovery, Sound Alerts, AAA, Modular and Extensible.It uses a
Verify that you don't have Scroll Lock enabled on your keyboard.
-Original Message-
From: Johan Bornman [mailto:[EMAIL PROTECTED]
Sent: Tuesday, September 09, 2003 9:24 AM
To: [EMAIL PROTECTED]
Subject: Hyper Terminal - 2500 [7:75065]
I don't get any response when configuring a
I guess my expectation and Cisco's, or at least their current expectations
as listed on their web site, don't match then. By my definition a beginner
should know about CIDR, EIGRP, and OSPF. It's not like they are inherently
difficult to understand. People tend to make it sound like rocket
Which set of equipment (3550 vs ATM) can have the more devious requirements
in the lab? If two 3550s then buy it. If the ATM then buy it. I'd lean
towards the 3550 and rent time for the ATM. I have no LAB experience to back
up my opinion. Be forewarned.
-Original Message-
From: Dave
Oh, and while I'm on the subject - why EIGRP? This is a proprietary
Cisco Protocol. OK, I believe that Juniper may have implemented it, but
to the best of my knowledge no one else has.
Best regards,
Dom Stocqueler
SysDom Technologies
Visit our website - www.sysdom.org
-Original Message-
My opinion you can rent one day of rack time for ATM and understand it.
Dave Williams wrote in message
news:[EMAIL PROTECTED]
Group,
I'm planning on purchasing my final addition to my RS home lab sometime
this month. I'm having a hard time deciding if I should add another 3550
(I have
Fred, check out the archives for Howard's piece on the difference
between 'Rocket Science' and 'BGP' when at NASA.
Best regards,
Dom Stocqueler
SysDom Technologies
Visit our website - www.sysdom.org
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Reimer,
Another way to look at it is that you have one long contiguous line of
addresses
that you need to break up into different size groups that must also be
contiguous.
For example: 192.168.1.0 /24
Assume we need three networks (nets ab) with 40 hosts, two networks
(nets cd) with 25 hosts, and 3
Another way to look at it is that you have one long contiguous line of
addresses
that you need to break up into different size groups that must also be
contiguous.
For example: 192.168.1.0 /24
Assume we need three networks (nets ab) with 40 hosts, two networks
(nets cd) with 25 hosts, and 3
And one last point, No LAN is an island, why two IG(P) protocols and no
EG(P) protocol?
A NA should at least a some understanding of how to connect to the
outside world - when to use BGP and when not to.
Sorry Fred, not having a go at you personally, but these are points we
all need to think
I just ran into this. I have a 2610 that is terminating a tunnel
between itself and a pix... but I also have three email servers behind
this router that need to be statically nat'd.
Here is the config that this guy from cisco (wicked smart) helped me
figure out:
hostname Phoenix_Colo
crypto
Hello all,
I am trying to terminate a vpn tunnel on a 3640 for clients (4.x). I
have done it on a pix with split-tunnel. Can the 3640 be setup to
perform split-tunnel?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=75134t=75134
Just thought I'd follow up :::
we did it::: hot-swapped-upgraded power supplies w/o any down time.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/6000hw/6000_
ins/01over.htm
-Original Message-
From: COULOMBE, TROY
Sent: Tuesday, September 02, 2003 5:57 PM
To: [EMAIL
Dom wrote:
And one last point, No LAN is an island, why two IG(P)
protocols and no
EG(P) protocol?
A NA should at least a some understanding of how to connect to
the
outside world - when to use BGP and when not to.
Default routing. Wouldn't we all be better off if CCNAs would stay away
I share my idea with you blow:
Please application 2 ISDN lines and buy 2 ISDN modems, in china, you only
need to pay RMB 50 per month for the lines, so cheap.
Good luck!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=75139t=75019
Hi All,
I have a production site that has a Class C ip address scheme with /28 block
giving us 16 ip addresses. However, we need additional public ip addresses
and our ISP is unable to provide us with another contiguous block of 32 ip
addresses using this specific network. My firewalls are
Priscilla,
As much as I respect your great knowledge I must disagree. If CCNAs had
some small amount of understanding of BGP (and I mean small) they would
stop asking about registered AS numbers etc when trying to set up
so-called resilient connections, usually to/from the same providers. Can
we
It is a neat trick. Here's the config on CCO:
pad
http://www.cisco.com/warp/public/707/static.html
See also the Networkers 2000 presentation 2402 for an explanation.
-Original Message-
From: bk [mailto:[EMAIL PROTECTED]
Sent: Tuesday, September 09, 2003 6:26 PM
To: [EMAIL PROTECTED]
Tom,
In the old CCNA books if a question came up about how many subnets could be
formed from a block - the all zeros and all ones subnets were not counted.
Does this still hold with the new curriculum?
-Original Message-
From: Tom Lisa [mailto:[EMAIL PROTECTED]
Sent: Tuesday, September
Are you using NAT? Your firewall(s) come from which vendor? Your network
diagram looks like?
I'll assume you have an Internet facing router with a firewall behind it and
maybe routers behind the firewall.
IP unnumbered on the serial link to the ISP.
Use two addresses from one ip address block for
Sure
You will need to be running IOS 12.2(8)T or above.
bk wrote in message
news:[EMAIL PROTECTED]
Hello all,
I am trying to terminate a vpn tunnel on a 3640 for clients (4.x). I
have done it on a pix with split-tunnel. Can the 3640 be setup to
perform split-tunnel?
**Please support
No, the new curriculum recognizes the subnet zero command.
Prof. Tom Lisa, CCAI
Community College of Southern Nevada
Cisco ATC/Regional Networking Academy
Cunctando restituit rem
Daniel Cotts wrote:
Tom,
In the old CCNA books if a question came up about how many subnets could be
formed
At 10:36 PM + 9/9/03, Dom wrote:
Fred, check out the archives for Howard's piece on the difference
between 'Rocket Science' and 'BGP' when at NASA.
Best regards,
Dom Stocqueler
SysDom Technologies
Visit our website - www.sysdom.org
Seriously, I've fought a battle for many years with Cisco
At 11:32 PM + 9/9/03, Priscilla Oppenheimer wrote:
Dom wrote:
And one last point, No LAN is an island, why two IG(P)
protocols and no
EG(P) protocol?
A NA should at least a some understanding of how to connect to
the
outside world - when to use BGP and when not to.
Default
Oh, and while I'm on the subject - why EIGRP? This is a proprietary
Cisco Protocol. OK, I believe that Juniper may have implemented it, but
to the best of my knowledge no one else has.
Can we say account control?
EIGRP is somewhat less resource intensive than link state protocols
under some
At 10:08 PM + 9/8/03, Priscilla Oppenheimer wrote:
Maybe a dumb question, but I know you guys can help me. :-)
How would I know if a router is using excessive CPU on IP access lists?
What am I looking for when I do a show processes cpu?
Thanks,
Priscilla
This isn't a complete answer to
At 12:18 AM + 9/10/03, exchange wrote:
Hi All,
I have a production site that has a Class C ip address scheme with /28 block
giving us 16 ip addresses. However, we need additional public ip addresses
and our ISP is unable to provide us with another contiguous block of 32 ip
addresses using
hi, I am wondering what is the implication if I have a network whereby Cisco
Per Vlan Spanning Tree is implemented with PVST plus and I plug in a
external switch such as the Hwa Wei switch that doesn't seem to support
PVST. does it mean that I could only have one vlan on the hwa wei switches
96 matches
Mail list logo