IIRC its 0-1023, but 0-16? are reserved as is 1023.
Neil
Dennis H wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
No you can not use any digits. I don't remember exactly but I think the
valid range is 17-1027...
Dennis
suaveguru wrote in message
[EMAIL
you need to check with your local telco provider. It is charged differently
in different areas.
Neil Schneider
wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hello Group,
I have querry about ISDN lines.
As you know that it consists of 2 B- Chanels for data trans
It has never been needed for CCNP
Neil
Michael Wang wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi, all:
I was told that CCIE written is no longer necessary for CCNPs. Is it true?
I
could not find anything on Cisco web site to support it.
Can anybody let me know?
to share the dsl connection.
Neil Schneider
Ole Drews Jensen wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
The first part of this message is not really a study question, but more
like
a curiosity question.
With DSL being very popular and Cisco having changed their C
You guessed it, you need two ethernet interfaces. a 2514 or a 1605 are the
ceapest way. A 2611 or 2621 will also do the job.
Neil Schneider
CCSI CCNP
Greg Macaulay wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi all,
I need some assistance with setting up
isn't too bad, a one day hands on configure the routers part
and a 1/2 day presentation. You have to present two modules from the ICND
course. All of the hands on is based on ICND as well, except setting up a
router as a frame relay switch.
Neil Schneider
CCSI CCNP MCT MCSE
William Harrison
After a quick look it appears that your BRI0 interface (and dialer0?)
should be set as ip nat outside, not inside.
Neil Schneider
dt wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi,
I am pretty new so please be patient. I am wearing my flame retardant
suit.
I a
Unless you get very lucky! I just found one for $800.00.
Neil
Dennis H wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Sorry to tell you but you won't find an ISDN simulator for less than
$1,500...
Ahmed Mamoor Amimi wrote in message
[EMAIL PROTECTED]">news:[EMAIL
you could get an older cisco cs-500. they came in both 8 and 16 port
models. You can pick one up for a couple of hundred on ebay.
Neil Schneider
Ryan O'Reilly wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi All,
I'm curious if anybody knows of any ine
Is payment required when you register for the lab or when you actually take
it? Since there is a 7-8 month wait I would hope cisco dosen't hold onto my
$1250.00 for all that time.
Neil Schneider
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=11743t=11743
Like the 2509/2511 there is an 8 port 508-cs and an 16 port 516-cs. I am
using a 516-cs in my home lab. It runs IOS, but only a version 10. Uses
regular rolled terminal cables to connect to the devices. It is working
fine for me.
Neil Schneider
chica wrote in message
[EMAIL PROTECTED
I self studied for both, but would suggest taking Support. Remote access
was easier to self study.
Neil
DL wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Greetings!
In order to take Cisco classes, I must use my vacation time.
Unfortunately, I will only have a week this
IIRC the basic software for the 1900 series is menu driven only. Enterprise
software gives you a CLI type interface as well.
Neil
sami natour wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi ,
I am using catalyst switch 1900 and I can not get to
CLI mode .I always get
I have a CPA2501, they are the basically the same as the regular 2500's.
Case is beige in color and they run a special IOS, BUT they can be easily
converted to run regular IOS images. Only other issue is that they shipped
with minimal flash/ram amounts. You may need to upgrade those.
Neil
recert is three years from date of initial cert. In your example Dec 2005
Neil
hal9001 wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
years hence when does the three years start?
1)When you take the first of the four exams or
2)When you take the last of the four
I'm pretty sure I already know the answer but... Is it possible to disable
the integrated NT-1 on a wic-1b-u card?I have an application that needs
an S/T interface but I already have the wic with the U interface.
Neil Schneider
Message Posted at:
http://www.groupstudy.com/form/read.php
no, the five-in-one refers to support for different standard, v.35 rs232
etc It is still a single port. If you need 5 plus serial ports on a
machine for a home lab consider an AGS+ , old, a little slow and noisy, but
you can't beat the price.
Neil Schneider
Ole Drews Jensen wrote
I am pretty sure the M means it is a compressed IOS.
Neil
Sam Deckert wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Check the image name from the sh ver - if it contains an 'm' it means run
from memory I think.
Here are the examples someone else used - you can see it from
For what it's worth I agree. College degree first, certifications second.
The B.A./B.S. gives you general employability? in any field.
Neil Schneider
Allen May wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
College counts SO much more than certifications (whic
a wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
mz is compressed and runs in memory
CM
-Original Message-----
From: Neil Schneider [mailto:[EMAIL PROTECTED]]
Sent: 26 June 2001 13:33
To: [EMAIL PROTECTED]
Subject: Re: How to tell the difference
www.deja.com
Vyacheslav Luschinsky wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Our provider does not have this news group. Do you know any free web
access
to news or to this news group?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=9342t=9286
Are you using the correct crossover cables?
Neil
Ravi Varma wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi Guys
We have 10 3640 Routers at our place
the probelm i am facing is that i have to connec all these ten routers
back
to
back each router have 2 FE and one T1
Any suggestions on what routers / modules will provide ATM capability
without spending megabucks?
Thanks in advance.
Neil
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=7921t=7921
--
FAQ, list archives, and subscription info:
What was the name of the Company that cisco bought for the 5000 series
switches?
Neil
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=7533t=7533
--
FAQ, list archives, and subscription info:
The cisco CCIE lab includes the 3900 series token ring switch. What other
switches use the same OS? Hoping to pick something up for cheap.
Neil
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=7538t=7538
--
FAQ, list archives,
The 2600 series only has one NM slot, but you can buy NM modules with
different numbers of ports on them.
--
Neil Schneider
MCT MCSE CCSI CCNP
Sean Young wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
CM,
I don't know where you buy the Cisco 2600s router but f
try pacificcable.com I've had great luck with those guys.
--
Neil Schneider
MCT MCSE CCSI CCNP
Joe Cremer wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Does any one know a cable supplier for a dce/dte cable to connect two
cisco
2621 routers with dual serial modu
List is $4000.00 US. Iv'e seen them on ebay for about 1000-1200 US. Don't
know if that helps you at all.
Neil
Adam Burgess wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I have an NM-4E on loan to a client at the moment and they have (finally)
decided that they will be
I doing it with a pair of wic-1dsu-t1. Using a T1 crossover cable that i
got from pacificcable.com
Neil Schneider
Tony Mesias wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Anyone know off the top of thier head if it's possible to configure F-t1
interfaces back to
I don't think cisco sells this anymore, and I don't have download rights at
CCO. Anyone have any ideas? I'm looking for ver 10.x or 11.x
Neil Schneider
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=5076t=5076
--
FAQ, list
Anyone know where I can get some serial cables for the cisco AGS+ for a
good price? Looking for CAB-VTM. Thanks in advance.
--
Neil Schneider
MCT MCSE CCSI CCNP
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=4918t=4918
I'm sure someone will correct me if i am wrong, but i am pretty sure your
ping will use the 150.3.53.3 next hop. 204.0.0.0 is a longer match to
204.167.*.* than the default 0.0.0.0 so it will be used first.
Neil Schneider
beth shriver wrote in message
[EMAIL PROTECTED]">new
If you have to resort to ad hominen (sp.) attacks then you really shouldn't
be saying anything at all. Q gets put into the troll filter.
Neil Schneider
Q wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I wanna know how a guy named DUNG qualifies to be a CCIE. Forg
I am trying to set up 2 t1 wics back to back to simulate a t1 wan
connection. I have a T1 crossover cable, clock source is internal on one
card, but I get nothing, down and down. Is anyone doing this and willing to
share a configuration? Or give me a hint as to what may be wrong
Thanks
Neil
Schneider
- Original Message -
From: Jim Brown
To: 'Neil Schneider' ;
Sent: Tuesday, May 08, 2001 12:42 PM
Subject: RE: back-to-back t1 with wic-1dsu-t1? [7:3633]
I believe clock source internal on one of the cards is all you need to
bring
them up. Please post the 'show interface
orrectly. No
interfaces are being seen. (makes it hard to do a tftp download)
Neil Schneider
- Original Message -
From: Jim Brown
To: 'Neil Schneider' ;
Sent: Tuesday, May 08, 2001 12:42 PM
Subject: RE: back-to-back t1 with wic-1dsu-t1? [7:3633]
I believe clock source interna
I didn't know this was possible. Can anyone provide more detail?
Neil Schneider
Carl Hensley wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Does anyone know how to upgrade a 3000 Router to a Cisco 2501.
What Boot Proms do I need. Where can I purchase the bo
yes it does. I have a 2912XL at home that i use for study.
Neil Schneider
Waters, Kris - TS/Corporate wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Quick ?, I'm considering one of these for a home lab (i don't have the big
bucks to spend yet). Does this sw
oops, sorry I misread your messsage. the 1900's use basically the same CLI
but they are a little different fron the rest of the switch product line.
the 1900 is the model used in the Cisco ICND class.
--
Neil Schneider
MCT MCSE CCSI CCNP
Neil Schneider wrote in message
[EMAIL PROTECTED
This is a known bug on W2K. do not rely on the test in the DNS admin
console. Use nslookup instead to test.
--
Neil Schneider
MCT MCSE CCSI CCNP
Shawn Xu wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I know this is Cisco stuff study group, but I am really stuc
you must be sponsored by a cisco authorized training center. they will send
you to a cisco ICP (instructor cert. program?) consisting of hands on lab
and a teachback. Both based on ICND material.
--
Neil Schneider
MCT MCSE CCSI CCNP
""niloufer tamboly"" wrote in mess
This is incorrect. If you have a CIR of 128 you will get 128 of actual
bandwidth. the bandwidth command does not actually throttle back the port.
If you have bandwidth set incorrectly you may very well have problems in
your routing tables regarding prefered routes.
Neil Schneider
"&qu
the router's hostname is sent as the username. set a username statement for
the remote router with the same password on both ends.
--
Neil Schneider
MCT MCSE CCSI CCNP
""leo"" [EMAIL PROTECTED] wrote in message
9aeq46$4ig$[EMAIL PROTECTED]">news:9aeq46$4ig$[EMA
just download hyperterminal private edition, upgrade to the included
hyperterminal www.hilgraeve.com
Neil Schneider
[EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
If you are running winnt, they're is a known bug.
Hyperterminal implementation
resorting to using another router such as --
ethernet --routerA rj45 routerA serial ---routerB serial routerB
rj45---ethernet
I want to do:
ehternet --- external converter routerA serial---routerA
rj45 ---ethernet
Neil Schneider
Priscilla Oppenheimer [EMAIL PROTECTED] wrote
whether it
exists.
Neil Schneider [EMAIL PROTECTED] wrote in message
AF134B55E3C8D111B56B0020AFE9717587A471@MAIL">news:AF134B55E3C8D111B56B0020AFE9717587A471@MAIL...
how the technologies worked, just whether anyone had heard or seen of such
a
device. Again, I am not saying it would ma
router would be needed to successfully accomplish this
task. I think that is why Priscilla pointed you to that link. Instead
of answering the question outright, she pointed you to material
that--upon digestion--would lead to the answer.
HTH,
John
"Neil Schneider" [EMAIL PROTECTED] 3/
I want to be able to plug my DSL modem into the serial port on my 2501,
leaving the ethernet port available for my lan. Does anyone know of a
converter/transiever that will allow me to do this?
Thanks in advance.
Neil
_
FAQ, list archives, and subscription
I have not seen any MS documentation that refers to it this way.
Neil Schneider
MCT MCSE CCNP CCSI
"Hennen, David" [EMAIL PROTECTED] wrote in message
F033F6D39B22D411B81400508B0B8EBE021037E7@rimail02">news:F033F6D39B22D411B81400508B0B8EBE021037E7@rimail02...
I've never h
it doesn't really accomplish your goal.
HTH,
John
"Neil Schneider" [EMAIL PROTECTED] 3/21/01 8:28:06
AM
I want to be able to plug my DSL modem into the serial port on my
2501,
leaving the ethernet port available for my lan. Does anyone know of a
converter/transiever that will
Are you intending to use serial 0 and 1 as the switched ports? if so you
have a config error in that S1 points to S3 not S0. I know of no reason you
cannot put a clockrate command on S0 as well, is that the problem you are
having? I think you also need to set the LMI type for IOS 11.1
Neil
I think you are losing sight of the real question, which is right on a cisco
exam! That can ONLY be D. Whether this is the phrasing you would use in a
production environment is totally irelevant.
Neil Schneider
""John Neiberger"" [EMAIL PROTECTED] wrote in message
s
699
Neil Schneider
""Roan, Wayne"" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Group,
What is the passing score for 640-504 BCMSN?
Thanks,
Wayne
_
FAQ, list archives, and subscription inf
the answer to #3 is no. You have to just type in the command.
Neil Schneider
[EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
i am taking my CIT exam next week. answers to one or more of the following
clarifications will highly be appreciated.
1. i
690
Neil Schneider
""Gayathri"" [EMAIL PROTECTED] wrote in message
97g14u$r90$[EMAIL PROTECTED]">news:97g14u$r90$[EMAIL PROTECTED]...
Any idea what is the passing score for BSCN?
Thanks..
_
FAQ, list archives,
It is NOT true that ethernet is half and fastethernet is full duplex.
Either 10Mbps or 100Mbps ehternet can be run in half or full duplex mode.
And offhand I don't know if the 2500 AUI port will do full ethernet.
--
Neil Schneider
MCT MCSE CCSI CCNP
"SAIF" [EMAIL PROTECTED] wrote
if all
fastethernet is full duplex?
--
Neil Schneider
MCT MCSE CCSI CCNP
"SAIF" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
100mbps is not ethernet be sure its fast ethernet ,also their is no
collisions in fast
ethernet ,its colliision fre
Chris,
Someone else can probably do a more detailed job with this than I can but...
OSPF doesn't use TCP or UDP to transmit data. It is its own protocol,
therefore has a unique protocol #. TCP and UDP also have protocol #s, as
does ICMP (again ICMP does not use either TCP nor UDP)
--
Neil
I wouldn't loose any sleep woorying about token ring. :)I just took the
exam a few weeks ago.
--
Neil Schneider
MCT MCSE CCSI CCNP
""Stephen D Skinner"" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Gents
Can anyone te
yes you do.
--
Neil Schneider
MCT MCSE CCSI CCNP
""vikas patel"" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hello folks,
I want to know what does the 11.3(9) signifies in show version command?
I mean what is 11, what is
the presentation covering
ALL the bullets on each slide, even if this may not ge what you would do in
a real class.
--
Neil Schneider
MCT MCSE CCNP
""Pierre-Alex"" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hello Group,
I am about t
The zero in the third octet is fine.
--
Neil Schneider
MCT MCSE CCNP
""Randy Witt"" [EMAIL PROTECTED] wrote in message
news:sa7847cf.076@INETMAIL...
Have an issue, hope many of you don't feel this is too off topic. Many of
you have helped me in the past with certificatio
yes 172.16.4.0 thru 172.16.4.3 would be subnet zero.
Neil Schneider
""Gareth Hinton"" [EMAIL PROTECTED] wrote in message
94qd3r$s2r$[EMAIL PROTECTED]">news:94qd3r$s2r$[EMAIL PROTECTED]...
I've read it five times and still can't see a subnet zero in the example.
AFAIK you can only go as far as /30.
Neil Schneider
[EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hello good guys of the group, can anyone with the knowledge of ip/31, help
me?
please.
I need to know what it is use for, and how it works, pls.
The training center I work at does this also. We are partnered with an
official Cisco training provider that supplies the instructors. Perfectly
allowable.
--
Neil Schneider
MCT MCSE+I CCNA
"Brian" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTE
No, not IPv6, just an regular IPv4 address written
partially in hexidecimal. Works on NT/W2K, don't know about other
platforms.
Neil Schneider
""Minh Vu"" [EMAIL PROTECTED]
wrote in message 014501c04b37$8fc4d5a0$[EMAIL PROTECTED]">news:014501c04b37$8fc4d5
Count me in.
Neil Schneider
""Bradley J. Wilson"" [EMAIL PROTECTED] wrote in message
021101c04423$82625380$ec659aaa@bwilson">news:021101c04423$82625380$ec659aaa@bwilson...
There will be soon...stay tuned.
- Original Message -
From: suk Ciscostudy
AND usually means both :)
Neil
""Jacques Allison"" [EMAIL PROTECTED] wrote in message
8s1p2i$k5q$[EMAIL PROTECTED]">news:8s1p2i$k5q$[EMAIL PROTECTED]...
For the link below - It says that for CCDP the Prerequisites are "Valid
CCNA
and CCDA certifications." Does this mean that you only need
I thought that was strange when I first saw a question like that. Oh Well,
Cisco does things there own way.
Neil Schneider
"Keith Woodworth" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Ive been at this for quite a while and the odd sub
Possibly your "who cares!" attitute and your 347 score are related? Just a
thought.
Neil
""Donald B Johnson Jr"" [EMAIL PROTECTED] wrote in message
030001c01db7$51db2170$[EMAIL PROTECTED]">news:030001c01db7$51db2170$[EMAIL PROTECTED]...
who cares!!! when you console, or telnet, or tenlet
No, only 300!
Neil
""J K"" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
dont you get 400 for typing your ssn in correcly and sitting in the right
sylvan seat . Ah Who Cares !
From: "Neil Schneider" [EMAIL PROTECT
ht
Priscilla
At 12:25 PM 9/13/00, Neil Schneider wrote:
Possibly your "who cares!" attitute and your 347 score are related? Just
a
thought.
Neil
""Donald B Johnson Jr"" [EMAIL PROTECTED] wrote in message
030001c01db7$51db2170$[EMAIL PROTECTED]"&g
correcly and sitting in the
right
sylvan seat . Ah Who Cares !
From: "Neil Schneider" [EMAIL PROTECTED]
Reply-To: "Neil Schneider" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: cisco switches
Date: Wed, 13 Sep 2000 12:25:54 -0400
Possibly your &qu
You can remove it in Win2000
Neil
""Scott Nelson"" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hah! But you can't remove Netbios. It's a Windoze feature. g
Scott
You know that handy-dandy feature in Windows called Network
Neighborhood?
Remove
While those masks MAY work on some systems they are not usually considered
valid. The rule is that subnet mask bits must be contiguous from the left.
Don't have an rfc # at the moment to point to but...
Neil
""Dale Cantrell"" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL
Fine if you have a CCO acount, otherwise not very usefull.
Neil
""McCallum, Robert"" [EMAIL PROTECTED] wrote in message
news:[EMAIL PROTECTED]
.uk...
Once again,
http://www.cisco.com/partner/visio/
-Original Message-
From: Mike Dang [mailto:[EMAIL PROTECTED]]
Sent: 31 August
I bought the exam cram flashcards, not bad, although a few errors.
Neil Schneider
""Bessette, Jesse"" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Im looking for CCNA "507" flashcards...any ideas?
__
have you tried www.measureup.com ?
Neil
""Rod Christie"" [EMAIL PROTECTED] wrote in message
8obull$qic$[EMAIL PROTECTED]">news:8obull$qic$[EMAIL PROTECTED]...
I'm having trouble finding good prep tests for the CCNP exams; both
Trancender and CICprep won't be ready until December. I've been
If you have firsthand knowledge of this practice the center should be
reported immediately.!!!
Neil Schneider
""McCallum, Robert"" [EMAIL PROTECTED] wrote in message
news:[EMAIL PROTECTED]
.uk...
Hi,
I am currently on a course just now and while speaking to other del
included on the feature pack CD does not exactly match the name given in the
instructions, and it seems to be trying to go the other way, from regular
2500 TO ciscopro 2500
Any help would be appreciated.
Neil Schneider
___
UPDATED Posting Guidelines: http
Does anyone know if there is a way to make it work. I have installed it on
a few W2K machines and it will not run on any of them. search.exe error.
Neil Schneider
Pinnacle Training Corporation
200 Friberg Parkway
Suite 3013
Westborough, MA. 01580
800-370-2791 Fax 508-898-2422
[EMAIL
81 matches
Mail list logo