Hi Dan;
The easiest way is to set up secondary IP address in your Cisco 2501.
I guess your router is Cisco 2503, not 2501, it does not support modular
like cisco 1600, 1700, 2600, 3600 Series, etc.
Hope this help
Vincent Chong
Dan Pearson Hi,
I am setting up a test lab environment
Hi;
I know the exam is Multiple Choice.
The questions will stated that how many answer is looking for or
not?
Thanks
Vincent
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=2137t=2137
--
FAQ
in your router will detect keepalive signal, when it
detected, it will
up.You can type no keepalive under interface configuration, the
ethernet interface
will keep up even no physical connection. You have to enable the
interface, of courese.
Hope this help
Vincent Chong
md. nazri
1750 with enough memory and flash if you wan to play voice over ip
1720 series ( no support for voice)
Jon Might look at the 827-4v router, as well. It's an Alcatel-DSL
modem, with
an ethernet interface and four FXS interfaces. Should be able to buy two
of them for what a single 1700 and
proper support if I am not using the
IOS software as it comes from CCO.
Jason Coleman - CCNP, CCDP
Customer Engineer
Network Management Center - Austin
(ph) 512-340-3134
(email) [EMAIL PROTECTED]
-Original Message-
From: Vincent Chong [mailto:[EMAIL PROTECTED]]
Sent: Tuesday
hey man;
1)Cisco IOS 12.0 series, please read the CCIE certification information
from the Cisco website.
2)The IOS list is to show what IOS does cisco 1750 support, btw, they
are all 12.1 seies.
hope this help
Vincent
Fred Danson Hey Group,
Does anyone know which of the IOSes
1)Even you boot from the TFTP, you still need enough memory to run IOS?
2)Did you change the register value? Register value should be 0x102, if
I am correct
Hope this help
Vincent
Maximus Decimus Hi all,
Need assistance in getting the above working. I have a 2651 with 2 x
10/100
It's my router bootup message, running 12.0.9 for just 8m flash.
The IOS is compressed by mzmaker.
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-JOS56I-L), Version 12.0(9), RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Tue 25-Jan-00
You should open standard port 53 for DNS traffic, not port greater than
1023.
Correct me if I'm wrong
Vincent
David Eitel Hello Everybody,
I have a segment that I want only established traffic to enter. This has
become quite confusing. I want ping, telnet, traceroute and DNS replies
document and surface mail
to your address. Let me know if it interests you.
RamG Hello Gang
Just want to keep you all informed on the board not to deal in any form of
TRADE {CCIE Material }or BUYING accessories from VINCENT CHONG. I had a
bad
experience today. We had entered
me know if it interests you.
RamG Hello Gang
Just want to keep you all informed on the board not to deal in any form
of
TRADE {CCIE Material }or BUYING accessories from VINCENT CHONG. I had a
bad
experience today. We had entered into an agreement to trade CCIE
materials.
I sent
that you can
follow the link that
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121relnt/xpr
n121/121feats.htm
Hope this help
Vincent Chong
Roger Sohn Hi All,
Just wanted to hear what other people are using (or would recommend) for
the
IOS images on their 2500 series routers
generally speaking, 1 switch is 1 diamter
""Sim, CT (Chee Tong)"" Hi.. I read CISCO BCMSN book.. it said that
modifying the spanning tree
dia
(network diameter) will correcly modify the timer (eg Max age, hello,
forward delay). But I don't understand how "dia" can modify it? Based on
hi;
Currently, I subscibe to ISP ADSL service, can I use my router to
function as PPPoe clients. So the network behind the router can access
the internet?
Thanks
Vincent
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=1249t=1249
Hi;
If I would like to set up a VOIP ready router, I need to NM-2V or 1v
module +VIC module
require to install in Cisco 2600 series but Cisco 1750 only need VIC.
Am I correct?
Thanks
Vincent
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=1092t=1092
Hi;
If I filled up only 1 RAM slot of the router, will the router boot up,
or the router require 2 slot are filled up.
Would like to know? Cos I do not have spare memory ( over 32) for 1 pieces
to test my cisco 2620.
TIA
Vincent
Message Posted at:
http://www.groupstudy.com
Hi;
Does the 2500 flash can be used in 2600 series?
Thanks
Vincent
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=214t=214
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report
Probably line no error, try the following equation to calculate the right
line no. that you are using.
The below is only for 3600 series.
Interface no.=(32 x slot no.) + unit no. +1.
Hope htis help
Vincent
""Niraj Palikhey"" Hi,
I am trying to setup a 3640 router wit
Hi;
To all sniffer expert, I would like to simulate IPX traffic in my pc, so
I can pratice IPX acces-list in
my router.
Is that possible?
Thanks
Vincent
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report
Hi;
I would like to how to do it, anyone please tell me?
thanks
Vincent
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Router ID sequence in ospf
1) Loopback IP address,
2) No loopback address configured, router will choose the numerically
highest IP address on any of its
Physical interface, as long the interface is up.
Hope this help
Vincent
""Larry Ogun-Banjo"" ??
Probably line no error, try the following equation to calculate the right
line no. that you are using.
The below is only for 3600 series.
Interface no.=(32 x slot no.) + unit no. +1.
Hope htis help
Vincent
""Niraj Palikhey"" [EMAIL PROTECTED] 6g)s6l%s
[EMAIL PROTECTED]&qu
Router ID sequence in ospf
1) Loopback IP address,
2) No loopback address configured, router will choose the numerically
highest IP address on any of its
Physical interface, as long the interface is up.
Hope this help
Vincent
""Larry Ogun-Banjo"&qu
2610 only support 802.1q.
"Dwayne Saunders" [EMAIL PROTECTED] ?
1B3C3C1C7A05D511A5B50001025312BC08CA9C@aspmail">news:1B3C3C1C7A05D511A5B50001025312BC08CA9C@aspmail...
CAn anyone help me with a small problem I face.
I am using a 2621 router 2900xl switch and a 2610 router.
the purpose of
esting
traffic.
Don
- Original Message -
From: Alan Basinger [EMAIL PROTECTED]
To: Chris Larson [EMAIL PROTECTED]; perez
claude-vincent
[EMAIL PROTECTED]; Ya Wen
[EMAIL PROTECTED]; Patrick
Murphy [EMAIL PROTECTED]; Leah Lynch
[EMAIL PROTECTED]; 'Jay
Chandradas' [EMAIL P
IOS is not free of charge.
""David spalding"" [EMAIL PROTECTED] 6g)s6l%s
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi.. May I know how to get CCO member. Our company bought a lot of
equipment
from a cisco reseller, but what info can I provide to cisco inorder to get
in CCO ID and password
No, please refer to.
http://www.cisco.com/univercd/cc/td/doc/pcat/mxne__p1.htm
""Adam Burgess"" [EMAIL PROTECTED] ?
003d01c0bc37$ed1651e0$[EMAIL PROTECTED]">news:003d01c0bc37$ed1651e0$[EMAIL PROTECTED]...
A month or so ago, I recall someone on the list saying that they were
successful in
For NM-2E2W, it may work on 12.1XQ.
But for NM-1E1R2W, I am not sure.
""Vincent"" [EMAIL PROTECTED] 6g)s6l%s
9acja2$ns5$[EMAIL PROTECTED]">news:9acja2$ns5$[EMAIL PROTECTED]...
No, please refer to.
http://www.cisco.com/univercd/cc/td/doc/pcat/mxne__p1.htm
"
no.
"Irwan Hadi" [EMAIL PROTECTED] ?
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I just curious, if I use Cisco Catalyst 2900MF-XL with fibre optic uplink
module (100 base FX), can I connect the end of the fibre optic cable to a
Cisco Catalyst
3524 XL ? because the Catalyst 3524 XL I
Please check your IOS version support ISL trunking or not, please go to
cisco.com
to check it out.
""Washington Rico"" [EMAIL PROTECTED] $B@qUm1wM97o(B
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Encapsulation command doesn't come up when trying to configure ISL or
802.1q Vlan trunking
Only work at distance vector routing protocol, such as RIP, IGRP, RIP for
IPX, etc.
For link state routing prootocol like OSPF, IS-IS, constant exchange hello
packet,
snapshot routing will not work in such environmnet.
For EIGRP, this particular routing protocol using hello protocol ecchange
Hi;
I am looking for the links that contains software that can compress
Cisco IOS 2500 image.
Can you point to me?
Thanks in advance
Vincent
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct
to do it/
Thanks
Vincent
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
60 is active time, for the rouer end to end to exchange routing update
between server and client.
2002 is quiet time, router freeze, until next active period.
""Bradley J. Wilson"" [EMAIL PROTECTED] ?
00cd01c0bac3$16b00f80$fd02f7a5@bwilson">news:00cd01c0bac3$16b00f80$fd02f7a5@bwilson...
Thanks all! Problem fixed.
Just follow cisco recommendation and it works.
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
No. Cat6K support both version.
""Jake Secrist"" [EMAIL PROTECTED] ¼¶¼g©ó¶l¥ó
01c0b964$4c3231c0$[EMAIL PROTECTED]">news:01c0b964$4c3231c0$[EMAIL PROTECTED]...
I've searched the archives, but can't find an answer.
Which switches are set-based and which are IOSand does the title
Upgrade the boot rom is necessary.
Call cisco.
""RamG"" [EMAIL PROTECTED] ¼¶¼g©ó¶l¥ó
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hello Gang,
I am trying to buy 2511 router. I asked for show line show version
output. Do you guy's see any error in the output. The seller upgraded
the
02:51:49: TR0: txtmr: 0x0, msclk: 0x9D5028, qt: 0x3471AC (6872696ms)
starting.
Thanks
Vincent
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
For I am not familiar with TokenRing. I just wondering how come i insert 2
router into the token ring hub,
one of the interface is up/down all the time.
Thanks
Vincent
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report
It will depend on the capability of the switch. that you are using.
Regarding to the cisco recommendation
1) 500 node for 1 Ip segment
2) 300 node for 1 Ipx segmnet
3) Mixed enviroment 200
4) Netbios 200
5) Appletalk 200
"Katsagianni Natasa" [EMAIL PROTECTED] ¼¶¼g©ó¶l¥ó
[EMAIL
to
communicate
with user in ethernet.
If you are using 2 router, you may need to configure DLSW.
hope this help
Vincent
"Andrew Larkins" [EMAIL PROTECTED] ¼¶¼g©ó¶l¥ó
8F5F72F80EF5D311ADE600A0C9DCF8620112C241@UBDCCOMJHBEX">news:8F5F72F80EF5D311ADE600A0C9DCF8620112C241@UBDCCOMJHBEX...
Did you try extended ping?
[EMAIL PROTECTED] ¼¶¼g©ó¶l¥ó
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
It wasn't enabled, but I went ahead and enabled it, no difference. I
finally for
up and running purposes just added a static route, now everyone can talk
to
everyone, but I still can't ping
Hi;
Can you ping 127.0.0.1
Thanks
Vincent
[EMAIL PROTECTED] ¼¶¼g©ó¶l¥ó
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I have a question - please if I have overlooked something just point me in
the
right direction, I'm not looking to be spoon fed. :) I looked through the
Cisco
Did you terminate your cisco 2503 at NT1 equipment?
""Hoa Ngo"" [EMAIL PROTECTED] ¼¶¼g©ó¶l¥ó
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi! Everyone,
I got the 2 2503 routers and Teltone ILS-2000 ISDN line simulator. I try
to
learn the lab # 2 in the book All-in-One CCIE Lab study guide. I
buy a token ring hub
""Niraj Palikhey"" [EMAIL PROTECTED] ¼¶¼g©ó¶l¥ó
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
htmlDIVHi,/DIV
DIVIs it possible to setup a Token Ring interface (2502 router), in a
UP/UP state WITHOUT connecting it to a MAU, similiar to setting up an
Ethernet int. with the
Hi;
I want to know the diffenence between 2 system, I checked in the
cisco web site already, but could not find the answer?
Thanks
Vincent
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct
What did you use for prepare?
Thanks in advance
Vincent
""Almazi Rashid"" [EMAIL PROTECTED] ¼¶¼g©ó¶l¥ó
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi guys:
I passed CCIE written.Thanks everybody specially Tim O'brien to help me
for
RIF doc.
Could you guys tel
1)make sure you save your running configuration before you perform
upgrading
2) Valid connectivity to TFTP
3) In boot mode that you still can upgrade IOS into your router.
""Niraj Palikhey"" [EMAIL PROTECTED] ¼¶¼g©ó¶l¥ó
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi,
When I was
should work on 802.1q
""Thomas"" [EMAIL PROTECTED] ¼¶¼g©ó¶l¥ó
99h0pd$471$[EMAIL PROTECTED]">news:99h0pd$471$[EMAIL PROTECTED]...
Hi All - I wonder if it is possible to implement the "Routing on a stick"
method using Cisco 3620 router (with 1 fast ethernet port) and the 3Com
CoreBuilder 5000
I guess in faovour of metric.
"John Neiberger" [EMAIL PROTECTED] ¼¶¼g©ó¶l¥ó
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Okay, I just tried this with RIP advertising the default route and I'm
even
more confused! Now, it behaves as I would expect. With no ip classless,
pings to unknown
_
Do You Yahoo!?
Get email at your own domain with Yahoo!
Mail.
http://personal.mail.yahoo.com/
_______
To unsubscribe from the CCIELAB list, send a
message to
=== message truncated ===
=
Vincent
__
using eigrp in your network 10.0.0.0 instead.
turn on auto-summary.
probably you can ping.
""Thomas"" [EMAIL PROTECTED] ¼¶¼g©ó¶l¥ó
99k20t$s6p$[EMAIL PROTECTED]">news:99k20t$s6p$[EMAIL PROTECTED]...
Hi All - In my network enviroment, I have LANs with 10.x.0.0/16 networks
and
WAN with
May be you try windows 95/98.
Or using other pc, if it worked as the previous owner said.
""Shawn P Bolan"" [EMAIL PROTECTED] ¼¶¼g©ó¶l¥ó
99b6gr$nrk$[EMAIL PROTECTED]">news:99b6gr$nrk$[EMAIL PROTECTED]...
Tried different speeds as well w/no luck. Verified from the previous
owner
that this
hi;
I am thinking of purchase this material for preparing my last written
exam.
Any advice will be welcome.
Thanks
Vincent
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations
1) Failed to get ip address first starup your pc, right?
2) Can you get renew the ip address once your pc power up your pc?
""Charles Dixon"" [EMAIL PROTECTED] ¼¶¼g©ó¶l¥ó
00a201c0b17d$76353240$42d3fea9@charles">news:00a201c0b17d$76353240$42d3fea9@charles...
Can someone help out with this,
Hi;
Want to know the difference between catalyst 3000, 3900, 3920
Thanks
Vincent
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Depends on the end user.
You can use your router as NAT device.
"John Chang" [EMAIL PROTECTED] ¼¶¼g©ó¶l¥ó
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
What do people use for a Firewall that does NAT translation? I know you
can use a PIX but what's the cost on the low end? Does anyone have
his case
I have a 1601 router , a web server and a checkpoint firewall going into a
HUB. There is one Ethernet slot for both the router and the webserver. The
web server sends the traffic upstream to the router in a normal environment.
When we hook up the firewall - the firewall grabs the IP
using debug isdn q.921, debug isdn q9.31, debug ppp.
""Albert Lu"" [EMAIL PROTECTED] ¼¶¼g©ó¶l¥ó
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi Everyone,
I'm currently configuring a 3600 for ISDN connectivity using a BRI w/ S/T
port. It is currently connected to the NT1 and everything ready
I am not agree with this.
I believe that NP/DP become more common not important.
"Chris Supino" [EMAIL PROTECTED] ¼¶¼g©ó¶l¥ó
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
They are referring to the NP/DP specializations, not the certs themselves.
The NP and DP are actually becoming more
1)CCNP and CCDP is a staring point, from the name of the exam, you will
see.
Foundation routing and switching. CCNP/DP just a stepstone to CCIE
2)CCIE can demonstrate the lab and means they can do something.
CCIE is a stepstone to real networking world.
"John
Did he know how to collect information from cisco website?
If he did not know how to did it, I just wonder.
""EA Louie"" [EMAIL PROTECTED] ¼¶¼g©ó¶l¥ó
007f01c0af4c$7ee0a240$[EMAIL PROTECTED]">news:007f01c0af4c$7ee0a240$[EMAIL PROTECTED]...
some of the certs are like getting a "paper diploma"
You should check the type of switch of your telco service provider first.
Different country use differnet type
Either in global configuration mode or interface mode.
To my best knowledge, you are required to reload the router for the
configuration to take effect.
""a p"" [EMAIL PROTECTED]
Yes you can.
""Hyman, Craig"" [EMAIL PROTECTED] ¼¶¼g©ó¶l¥ó
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
All,
I have a configuration that when a PIX firewall is connected with the 1601
Router, the firewall grabs the IP address. Can I put a statement into the
router that will force the
Hi;
Try extend ping by using R2 serial int Ip address.
Rgds;
Vincent
""MJL"" [EMAIL PROTECTED] ¼¶¼g©ó¶l¥ó 98u8fm$pam$[EMAIL PROTECTED]">news:98u8fm$pam$[EMAIL PROTECTED]...
Hi gang...
I have a problem that is driving me nutz. Take a look at my configs a
Try ebay.com.au, ebay.com, sold.com.au
"Hunt Lee" [EMAIL PROTECTED] ¼¶¼g©ó¶l¥ó
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Does anyone know what sort of switches should I get for practicing for
the BCMSN (Switching 2.0) exam? or for the CCIE lab? Any help or advice
is greatly appreciated.
1)Did you order the telco line from your telco service provider.
2)Did you have ISDN simulator?
""Hugo Martinez"" [EMAIL PROTECTED] ¼¶¼g©ó¶l¥ó
002b01c0aca5$4e55c8c0$[EMAIL PROTECTED]">news:002b01c0aca5$4e55c8c0$[EMAIL PROTECTED]...
Hi, somebody have a configuration file from a
general pratice, downgrade the IOS.
Waiting for Cisco release new IOS.
""Mike Peterson"" [EMAIL PROTECTED] ¼¶¼g©ó¶l¥ó
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi ALL,
After the upgrade of CAT OS and MSFC2 IOS to :c6msfc2-jsv-mz.121-5c.E8
I am getting TRACEBACK ERROR on MSFC2 card.
Has
Sample Configuration from cisco website
http://www.cisco.com/warp/public/793/access_dial/britopri.html
Hope this help
Vincent
""Hugo Martinez"" [EMAIL PROTECTED] ¼¶¼g©ó¶l¥ó
002b01c0aca5$4e55c8c0$[EMAIL PROTECTED]">news:002b01c0aca5$4e55c8c0$[EMAIL PROTECT
Hi;
I need cables or convert that can connect my IBM 8228 MAU to Cisco
2513 router.
Anyone knows that how to find cable (IBM type 1 connector one end, the
other end is
either DB9 or RJ45)or converter (IBM type 1 connecotor to RJ45).
Thanks in advance
Vincent
Windows NT can issue break sequence accoruding to the following document
provided from cisco.
http://www.cisco.com/warp/public/701/61.html
Please correct me if I am wrong. I did not try it.
""Stuart Potts"" [EMAIL PROTECTED] ¼¶¼g©ó¶l¥ó
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi Guys
1) Check the traceroute result.
2) From your configuration, after you correct it, you may find out that you
can control outgoing traffic.
You probably can not control incoming traffic. Generally, it is very
difficult for you to control incoming
traffic.
""Jacek Malinowski"" [EMAIL PROTECTED]
You only have 2M Ram on board, if i guess right. No memory installed in the
DRAM Slot, if
I guess it right.
You can open the chasis of your router, you should able to insert one piece
of 16M DRAM in your router.
8 RAM Flash.
Vincent
""vert"" [EMAIL PROTECTED] ¼¶¼g©ó¶l
You seems missing one of statemnet.
Where is your " nat statment"?
Please read the configuration guide in the cisco web site, it will provide
you a lot of pix configuarion.
Hope this help
Vincent
""Rick Holden"" [EMAIL PROTECTED] ¼¶¼g©ó¶l¥ó
000d01c0a389$1c
Hi;
only 1 PAT statment allowed in pix firewall.
While you are using show xlate comand, you will notice.
Hope this help
Vincent
"Moe Tavakoli" [EMAIL PROTECTED] ¼¶¼g©ó¶l¥ó
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
In previous implementations I had assumed that you can
Hi;
Anyone sell cheap 2513 ? For I can not afforad the expensive 2612,
I am looking for the cheap 2513.
Please send mail to [EMAIL PROTECTED]
thanks
Vincnet
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Illegal IP keyword - nat
Illegal IP keyword - nat
Illegal IP keyword - nat
Illegal IP keyword - nat
Illegal IP keyword - nat
Illegal IP keyword - nat
Illegal IP keyword - nat
Illegal IP keyword - classless
Loading c2500-js-l.120-7.bin at 0x340, size = 10203996 bytes
Thanks
Vincent
Hi;
I heard it from my frined, cisco router can be simulated Novell
server, so I can pratice IPX
access-list. Does anyone know how to set it up?
Thanks
Vincent
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
om the MAU to cisco 2504?
Thanks in advance
Vincent
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Depends on the limitation of the diameter of the spanning tree ?
Thanks
Vincent
""Maness, Drew"" [EMAIL PROTECTED] ¼¶¼g©ó¶l¥ó
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I've looked through the archives as well as on CCO but could not find a
definite answe
om the MAU to cisco 2504?
Thanks in advance
Vincent
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Hi;
Does anyknow know which ISDN Simulator is suitable for CCIE lab?
Thanks in adv.
Vincent
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Hi Dan,.
Don't be discouraged by it. How long you've been out of the job market. An
opportunity will come for someone like you who have the quality and
knowledge.
regards,
vincent
-Original Message-
From: park jeongwoo [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, January 09, 2001 11
Hi;
I would like to know whoever took this exam, any information
welcome?
Thanks
Vincent Chong
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
If you need to connected 2 switch together, you need to set up trunk using
802.1q.
You need to check the VLAN compatibility between each other.
Like VLan No.
[EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi
Has anyone has any experience of setting up
I agree!
After took the exam, I consider MCNS is a bit simple If the exam is a
specialization level exam.
"A.Strobel" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
http://www.cisco.com/warp/public/10/wwtraining/certprog/special1/changes_01-
01-01.html
the file directly from download.com.
Thanks in advance
Vincent
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Hi;
I just want to say thank you for everyone in the group who provide
me information about MCNS.
On the road to CCIE (R/S) written and Lab.
Best Rgds;
Vincent
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Hi;
Anyone know how to upgrade Flash in the MSFC II.
Thanks
Vincent
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
how to upgrade IOS of the MSFCII!.
""Vincent"" [EMAIL PROTECTED] ¼¶¼g©ó¶l¥ó
8utid9$cl2$[EMAIL PROTECTED]">news:8utid9$cl2$[EMAIL PROTECTED]...
Hi;
Anyone know how to upgrade Flash in the MSFC II.
Thanks
Vincent
_
FAQ, lis
Break the password, if you can connect to console
Hunt" [EMAIL PROTECTED] ? [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I have lost my login password to the Cisco 2501 router, what should I
do?
_
FAQ, list archives, and subscription info:
password recovery
"Hunt" [EMAIL PROTECTED] ? [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I have lost my login password to the Cisco 2501 router, what should I
do?
_
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Hi;
Just wondering what is the passing score and no. of questions, which
topic is important, that's,
under nda agreement, of course. Thanks in advance!
Thanks
Vincent
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Hi;
One router with 2 interface, one tokenring, one ethernet, how can I ping
each other.
Ehternet can ping tokenring, tokenring can not ping ethernet, change the mtu
size in the
tokenring already, but still unable to ping..
thanks
Vincent
_
FAQ, list archives
to token
ring ( using extended ping).
"Brian" [EMAIL PROTECTED] ?
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
how are they connected? serial? What interfaces are you pinging the ether
and token? Are both interfaces up/up?
On Wed, 25 Oct 2000, Vincent wrote:
Hi;
thanks anyway, but it can be ping , from ethernet to tokenring, tokenring to
ethernet..
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
hi all;
Any information related to MCNS are welcome.
Thanks
Vincent
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
)
9E0-571 CSPFA
9E0-570 CSVPN
Thanks in advance
Vincent Chong
Network Engineer
CCNP Voice Access CCDP
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
How do you manage to prepare for the written exam?
Thanks
Vincent Chong
""Jacques Allison"" [EMAIL PROTECTED] wrote in message
8s14dd$2m9$[EMAIL PROTECTED]">news:8s14dd$2m9$[EMAIL PROTECTED]...
Thanks for all your good info in the newsgroup!! Could have don
Hi;
Please tell how do you prepare for the written exam and lab!
Thanks
Vincent
""Howla"" [EMAIL PROTECTED] wrote in message
8s2nd9$b4h$[EMAIL PROTECTED]">news:8s2nd9$b4h$[EMAIL PROTECTED]...
Well done. How long did it take you in total to achieve the almighty
101 - 200 of 211 matches
Mail list logo