Violeta,
One of the photos from Martin's link is quite historic (they are all
historic, of course, but one more than the others). See attached. It shows
Blair Vedder (owner), Erich Bruckmann (builder), Mark Ellis (C&C custom
sales), and Ed Botterell (Hood sialimaker). I wish I had a higher
resolut
ere in Marion.
>
> If you have any questions I can pass them on.
>
>
>
> Sent from my Verizon 4G LTE smartphone
>
>
> Original message
> From: Violeta Ivanova via CnC-List
> Date: 11/14/16 22:34 (GMT-05:00)
> To: Martin DeYoung
> Cc: Violeta
)
To: Martin DeYoung
Cc: Violeta Ivanova , cnc-list@cnc-list.com
Subject: Re: Stus-List 1973 custom C&C 43' - hull/deck joint (toe rail
replacement?)
Martin
Great to connect with you! (Hull #1, eh?) Yes, our custom C&C 43' is X
Dimension. We call her XD. Here is mor
Martin,
That's all great information, thanks a lot.
Marek - thanks for the link to the vendor in Maine. I don't know much about
sealants, so it help to get recommendations.
More comments inline on specific topics - lots of food for thought!
Violeta
On Tue, Nov 15, 2016 at 1:34 AM, Martin DeYou
Hi Violeta,
I might be stating the obvious, but since you are planning to use butyl tape in
the project, you may want to look for the good product (apparently not all
butyl tapes were created equal).
One of the best sources of the butyl tape (if not the best) is Maine Sail
(Compass Marine) (ht
, toe
> rail. Through bolted on 4” spacing.
>
>
>
> Rick Brass
>
> Washington, NC
>
>
>
>
>
>
>
> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Ken
> Heaton via CnC-List
> *Sent:* Sunday, November 13, 2016 9:01 PM
> *To:* cnc-list
C 43' - hull/deck joint (toe rail
> replacement?)
> Message-ID: <000601d23e5b$1350bc90$39f235b0$@warmgear.com>
> Content-Type: text/plain; charset="UTF-8"
>
> I rebedded the aft half of my toe rail three years ago and the leaks
> stopped. The l
hose rails, and works well.
Leslie.
On Sun, 11/13/16, Violeta Ivanova via CnC-List wrote:
Subject: Re: Stus-List 1973 custom C&C 43' - hull/deck joint (toe rail
replacement?)
To: cnc-list@cnc-list.com
Cc: "Violeta Ivanova"
Da
Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Leslie Paal
via CnC-List
Sent: Sunday, November 13, 2016 3:49 PM
To: cnc-list@cnc-list.com
Cc: Leslie Paal
Subject: Re: Stus-List 1973 custom C&C 43' - hull/deck joint (toe rail
replacement?)
In thi
Rick Brass
Subject: Re: Stus-List 1973 custom C&C 43'
- hull/deck joint (toe rail replacement?)
Ken, et al:
The illustrations and text in the manual are pretty much the same as what is in
the manual that came with Imzadi – Hull Number 047 built in January 1976.
Except that my manual n
1973 custom C&C 43' - hull/deck joint (toe rail
replacement?)
The manual for the 1977 C&C 38 is here:
http://www.cncphotoalbum.com/download/38manual.pdf
See page 9 (3.3 Hull Deck Joint) and the illustration on page 35.
___
al
>>> amount on a new one, you may have leaks because the original 40 year old
>>> butyl is gone.
>>>
>>>
>>>
>>> Gary
>>>
>>>
>>>
>>> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of
>>
st likely show the toe rail and hull to deck
>> joint. If you know which 43 you own (original name of boat or her first
>> owner) you most can likely get copies of the drawings relating specifically
>> to your 43.
>>
>>
>>
>> However, merely removing and replaci
Behalf Of *Violeta
> Ivanova via CnC-List
> *Sent:* Sunday, November 13, 2016 2:46 PM
> *To:* cnc-list@cnc-list.com
> *Cc:* Violeta Ivanova
> *Subject:* Re: Stus-List 1973 custom C&C 43' - hull/deck joint (toe rail
> replacement?)
>
>
>
> Thanks, Bob. This is g
butyl is gone.
Gary
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Violeta
Ivanova via CnC-List
Sent: Sunday, November 13, 2016 2:46 PM
To: cnc-list@cnc-list.com
Cc: Violeta Ivanova
Subject: Re: Stus-List 1973 custom C&C 43' - hull/deck joint (toe rail
re
From: Violeta Ivanova via
CnC-List Date:11-12-2016 2:19 PM
(GMT-05:00) To: cnc-list@cnc-list.com
Cc: Violeta Ivanova Subject:
Stus-List 1973 custom C&C 43' - hull/deck joint (toe
rail replacement?)
Greetings all.
Might someone here
help with questions about the custom
-list.com
Cc: Violeta Ivanova
Subject: Re: Stus-List 1973 custom C&C 43' - hull/deck joint (toe rail
replacement?)
Thanks Dave. I hope Martin responds, he will be a great contact indeed.
Our toe rail is symmetric, T-shaped, with screws on both sides of the vertical
part. Here
Hi Mike
I couldn't agree more! That one-line mooring is pretty bad. Not really "my"
mooring, though. That photo is at the marina (which shall remain unnamed)
where our boat lives in the summer. One has to fish for the pendant with a
hook too - no fun if you return in the dark.
The extra blue line
Violeta
I can't help you with your toenail, but I do have a word of caution. I
strongly recommend that you use two lines on your mooring ball. There was a
fellow at our club that only used one line at the start of the season, shortly
after launch he had to be pulled off the rocks. Also one o
A replacement rail may be available from Rob McLaughlin at South Shore
> Yachts in St. Catherines, ON.
>
>
> Rob Mazza
>
>
> Sent from Samsung Mobile
>
>
> Original message
> From: Violeta Ivanova via CnC-List
> Date:11-12-2016 2:19 PM (GMT-05:0
Try Klacko spars they were the fabricators for C&C
http://www.klackospars.com/
Sent from my iPad
\ | /
(@ @)
--o00--(_)--00o--
416-805-3020 cell
416-231-7890 fax
..._/)..._/)..._/)..._/)
I'd rather be sailing
This e-mail and any files attached may be privileged and /or con
essage
> From: Violeta Ivanova via CnC-List
> Date:11-12-2016 2:19 PM (GMT-05:00)
> To: cnc-list@cnc-list.com
> Cc: Violeta Ivanova
> Subject: Stus-List 1973 custom C&C 43' - hull/deck joint (toe rail
> replacement?)
>
> Greetings all.
>
> Might someo
t.com Cc: Violeta Ivanova
Subject: Stus-List 1973 custom C&C 43' -
hull/deck joint (toe rail replacement?)
Greetings all.
Might someone here help with questions about the custom C&C 43' from 1973? This
was a limited edition and I think only fourteen boats were ever built. We woul
Thanks Dave. I hope Martin responds, he will be a great contact indeed.
Our toe rail is symmetric, T-shaped, with screws on both sides of the
vertical part. Here are some photos:
https://www.dropbox.com/sh/483a7kvckwx0ys5/AACbT_1GZsShvn8Xr7fWiHtRa?dl=0
We haven't found an exact match yet, so tha
Hi Violeta,
There’s a gentleman on the list by the name of Martin DeYoung who owns a C&C
43. He has been working deck work on his boat and may be an informative source
as regards your model. He hasn’t posted in some time but perhaps he may respond.
Perhaps if you could identify the type of toer
Greetings all.
Might someone here help with questions about the custom C&C 43' from 1973?
This was a limited edition and I think only fourteen boats were ever built.
We would like to replace the toe rail on our boat, but are unsure how that
might affect the hull/deck joint.
Some specific question
26 matches
Mail list logo