Lieber Alexander,
Wen das Leben nur so einfach wre...
On Sat, 14 Apr 2001, Alexander Skwar wrote:
:~Why don't you setup a filter for "out of the office"? Scott is using Lotus
:~Notes and it is rather hard to tell this out of office agent to not send
:~responses to Mailinglists like this one.
So sprach Denis HAVLIK am Sat, Apr 14, 2001 at 10:57:24AM +0200:
Lieber Alexander,
Wen das Leben nur so einfach wre...
*G* Tja, das stimmt wohl...
Btw, "close to impossible" sounds like "it can be done" to me. Maybe You
should write a little HOWTO for L.notes users?
Yes, it sounded like
"And at install time between a CD and a hdd both running DMA"
I have the Via chipset with the above situation: after crashing several times while I
tried the few tricks I know, the RC1 install suddenly went through fine, have no clue
why ! copying 670Mb of packages took all of a blazing
Whenever I start mirroring my closest cooker mirror, Gnome-core and GFCC
packages have updated times and are downloaded (but not installable).
"Version" has updated time everytime, too.
--
Digital Wokan, Tribal Mage of the Electronics Age
Guerilla Linux Warrior
On Friday 13 April 2001 10:06 pm, you wrote:
On Friday 13 April 2001 10:03 am, michael wrote:
On Friday 13 April 2001 03:40 am, you wrote:
michael wrote:
How do I use md5 sum check?
Just run:
md5sum filename
Thank-you; the rc1.iso file on my hd is good. Now how do I go
Grammar and spelling!!!
In MandrakeExpert slide, why not say,"As a newbie...as an expert..."( I just
caught a sig11 and was forced to startx in the middle of writing this!).
Use italics for emphasis!
Nice job on the whole, and the graphical boot process is smooth and
good looking!
--
pax
On Friday 13 April 2001 08:31 pm, you wrote:
Do you use? I use ATT Broadband (curse them) but not wireless.
If yes, what it like?
On 13 Apr 2001 11:10:50 -0700, michael wrote:
Has anyone been abloe to connect to the internet thru ATT broadband
wireless
using Linux???
-m-
I am
I saw a lilo.config last week with a line with the above command in there.
The rc1 install didn't give me the option for it.
Can someone give me the right way to put it into my lilo so my hds ( age6mos,
WD and IBM) can experience optimalization?
--
pax
-m-
So sprach Elton Woo am Fri, Apr 13, 2001 at 02:26:53PM -0400:
I've recently joined this list so I may have missed the
announcement. Could someone kindly
direct me where I may download the mandrake rpm package of Netscape
Communicator 4.77?
Have a look at the Cooker page on
So sprach R.I.P. Deaddog am Sat, Apr 14, 2001 at 09:57:58AM +0800:
So learn to compile from source yourself, you'll discover much more
problems then that!
Uhm, if I wanted to do this, I'd take FreeBSD! One of the reasons I like
Linux more, is that I don't have to compile everything myself.
Jason Straight [EMAIL PROTECTED] writes:
XFree86-server-4.0.3-7mdk.i586.rpm
How come all the corrupted RPM's today?
from which mirror are you dowloading ? I have attached the md5 checksums
of the XFree86 packages which can be checked with md5sum -c file.
0e4a8f7a33d73b56f289040d0630e292
Blue Lizard [EMAIL PROTECTED] writes:
happy-1.9-2mdk requires libgmp.so.2
one day i'll manage to build new ghc-5.0 and to rebuild happy... :-/
Blue Lizard [EMAIL PROTECTED] writes:
Actually, may have something to do with the way drakx repetidly and
recursively checks through the rpm database like it were a rpm -i a.rpm
fir each package. Redhat/Sse may sorta do all at start and force the
rest.
nope:
for i in *.rpm; do rpm -i
On Friday 13 April 2001 22:45, you wrote:
On Fri, 13 Apr 2001, Jason Straight wrote:
Yeah, sure and while I'm at it I'll just write my own graphics server as
a replacement to X. Why don't we all just do that, then we won't need
this mail list to try to find problems.
This is a devel
I'm downloading from sunet - I've seen others have problems with other sites
as well. I thought possibly something became corrupted on my drive so I
removed the bad rpm's here and re rsynced them and they were bad straight
from sunet.
On Saturday 14 April 2001 04:28, you wrote:
On Sat, 14 Apr 2001, Jason Straight wrote:
This is a devel list, but more specifically it's a devel list for the next
version of Mandrake Linux, and if everyone just compiled their own source
every time they had a problem running something on cooker it sure would make
it hard for the
Hi all,
I friend of mine is trying MailMan from contribs, but he got 2 problems with
it on LM-8.0:
1.
He found that it won't work with latest Apache because it is 233 and not 99
as in previous release. He repacked Mailman and send me the new RPM, so I
could send it to developer if they need
On Friday 13 April 2001 19:33, you wrote:
Yes, xine. Mount your dvd just like a data cd; start xine and right-click
in the xine video output window to show/hide the controller; click "DVD"
on the controller and press the start button. Enjoy!
Opsss... I have a "little" problem.
I follow
Elton Woo [EMAIL PROTECTED] writes:
I should also have added: "pleased to "meet" you (finally)
Mr. Boudjnah!" ;-) {sometimes I have difficulty understanding your
posts, but I realise that English might not be your first language
... nonetheless, you are one of the persons on
well
Daouda LO [EMAIL PROTECTED] writes:
rpm -qpi name_of_the_package.rpm gives you the packager/maintainer of the package .
i use the script attached to get the last changelog (or -NUMBER to
have the last NUMBER changelog)
--
MandrakeSoft Inc http://www.chmouel.org
Elton Woo [EMAIL PROTECTED] writes:
What *USB* devices are actually detected on
installation? AFAIK, at least mice and keyboards should be no problem,
do you have the usbd package installed and running ?
--
MandrakeSoft Inc http://www.chmouel.org
Shalrath [EMAIL PROTECTED] writes:
It only happens with big files between two ide hard drives at maximum
throughput and blah blah blah read the report
Whew, guess my pr0n^W files are safe for now!
ive got a 30gb and a 75gb IBM deskstar both on the primary IDE with a
plextor 16/10/40
Elton Woo [EMAIL PROTECTED] writes:
... so what do we do now? ... switch to Windows Me???
you'll get the same corruption problems even with Windows.
--
MandrakeSoft Inc http://www.chmouel.org
--Chmouel
michael [EMAIL PROTECTED] writes:
I saw a lilo.config last week with a line with the above command in there.
The rc1 install didn't give me the option for it.
Can someone give me the right way to put it into my lilo so my hds ( age6mos,
WD and IBM) can experience optimalization?
the best
On Saturday 14 April 2001 12:59, you wrote:
A couple things for xine
first the DVD drive has to be /dev/dvd which would be a link to the
/dev/hda or /dev/scd0 or whatever drive you are using.
second - did you compile and install libcss?
OHHH NO! :(
What is this? OK I'm gonna look between
On Saturday 14 April 2001 07:21, you wrote:
On Saturday 14 April 2001 12:59, you wrote:
A couple things for xine
first the DVD drive has to be /dev/dvd which would be a link to the
/dev/hda or /dev/scd0 or whatever drive you are using.
second - did you compile and install libcss?
Has this one been sent yet gnome-core depends on it?
On Friday 13 April 2001 02:10 pm, you wrote:
--=-=-=
Name: mandrake_deskRelocations: (not relocateable)
Version : 8.0 Vendor: MandrakeSoft
Release : 6mdk
This thread is a general Linux issue and has got nothing to do with
the Cooker release of Mandrake, please take it elsewhere.
b.
--
Brian J. Murrell
On Saturday 14 April 2001 05:46, Claudio wrote:
Hi all,
I friend of mine is trying MailMan from contribs, but he got 2 problems
with it on LM-8.0:
1.
He found that it won't work with latest Apache because it is 233 and not 99
as in previous release. He repacked Mailman and send me the new
Geoffrey Lee [EMAIL PROTECTED] writes:
Summary : Various UTF-7/8 - bg5,gb... converter
what about iconv (which is in glibc)?
On Fri, Apr 13, 2001 at 07:15:32PM +0200, Frederic Crozat wrote:
--=-=-=
Name: galeon Relocations: (not relocateable)
Version : 0.10.2Vendor: MandrakeSoft
0.10.4 is available.
b.
--
Brian J. Murrell
Yeah, I have the problem, too. According to http://www.pclinuxonline.com/Help_
__How_To/KDE-2/kde-2.html
Log in as root and open the /usr/share/applnk.kde directory. Copy the
Settings folder to your /.kde/share/applnk in your home directory and also to
your /.kde/share/applnk directory in
What about the -X34 DMA optimizations?
Chmouel Boudjnah wrote:
Shalrath [EMAIL PROTECTED] writes:
It only happens with big files between two ide hard drives at maximum
throughput and blah blah blah read the report
Whew, guess my pr0n^W files are safe for now!
ive got a 30gb and
Penguin Liberation Front strikes again !
---
Name: xsw Relocations: (not relocateable)
Version : 1.40.4Vendor: MandrakeSoft
Release : 1mdk Build Date: ven 13 avr 2001 19:57:20 EDT
Install date: (not
Penguin Liberation Front strikes again !
---
Name: libjsw Relocations: (not relocateable)
Version : 1.4.0dVendor: MandrakeSoft
Release : 2mdk Build Date: ven 13 avr 2001 19:22:52 EDT
Install date: (not
Penguin Liberation Front strikes again !
---
Name: halfStatsRelocations: (not relocateable)
Version : 1.0b7 Vendor: MandrakeSoft
Release : 1mdk Build Date: sam 14 avr 2001 16:45:10 EDT
Install date: (not
Penguin Liberation Front strikes again !
---
Name: avifile Relocations: (not relocateable)
Version : 0.53.5Vendor: MandrakeSoft
Release : 2mdk Build Date: ven 13 avr 2001 18:55:04 EDT
Install date: (not
Penguin Liberation Front strikes again !
---
Name: hlds_ld Relocations: (not relocateable)
Version : 1.50b5Vendor: MandrakeSoft
Release : 1mdk Build Date: sam 14 avr 2001 16:46:32 EDT
Install date: (not
Penguin Liberation Front strikes again !
---
Name: hlmaps Relocations: (not relocateable)
Version : 1.1 Vendor: MandrakeSoft
Release : 1mdk Build Date: sam 14 avr 2001 16:43:32 EDT
Install date: (not
On Friday 13 April 2001 10:19, R.I.P. Deaddog wrote:
On Fri, 13 Apr 2001, Ed Wilts wrote:
The Samba uninstall utility appears to be dependent on inetd, not xinetd,
and does not function properly with just xinetd installed. By looking at
the code, I think it will leave around swat in
Sorry if you recognize this as a repeat -- I am apparently not
conveying this message very clearly -- AFAICT, no one on the cooker
list has taken notice of this message.
There is a problem with the installation of beta 3 of Mandrake 8.0. The
same problem exists in the installation of Mandrake
Actually in the latest stuff it's in
/usr/share/applnk-mdk/Configuration/.directory
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, April 14, 2001 8:36 AM
Subject: Re: [Cooker] kcontrol blank
Yeah, I have the problem, too. According to
[EMAIL PROTECTED] writes:
"And at install time between a CD and a hdd both running DMA"
I have the Via chipset with the above situation: after crashing several times while
I tried the few tricks I know, the RC1 install suddenly went through fine, have no
clue why ! copying 670Mb of
Yes, this is a developer's list but not everyone gets a stiffy over compiling
from source. If you're so adamant about doing so why do you even bother with
Mandrake, why not go Slack? If anyone doesn't belong here it's you. Why
don't you do everyone on the list a favor and leave. Sorry for
Here's the deal
The software most of these companies use to VALIDATE the receiver and
do all the set-up stuff only runs under Windows. The hitch is that once all
that is done, TCP/IP is TCP/IP - and their system can't tell Windows from
Linux. No guarentees that I'm right, but have seen this
I did - and it's NOT listed. How do I tell X to turn it on? It has
worked in the past, so I know that the card can use it.
V.
On Saturday 14 April 2001 00:10, you wrote:
Try opening a console and typing in xdpyinfo and see if GLX is listed for
your card. OpenUniverse works fine on my
similar dependency problem cdrecord is needed by xcdroast-0.98-7mdk.
is it safe to force this, or does it need to be rebuilt?
v.
Hello,
The recent perl update has been failing dependencies the last few days.. and
the packages kpackage complains about haven't been updated. Is it safe to
load this, and force it? or am I missing something?
Dependency Problem:
perl is needed by mod_perl_common-1.3.19_1.25-2mdk
On Saturday 14 April 2001 09:01 am, you wrote:
Here's the deal
The software most of these companies use to VALIDATE the receiver and
do all the set-up stuff only runs under Windows. The hitch is that once
all that is done, TCP/IP is TCP/IP - and their system can't tell Windows
from Linux.
Blue Lizard wrote:
On 13 Apr 2001 12:58:08 -0400, Elton Woo wrote:
NB: I do it this way, because
1) I usually run my 17" monitor at 1024 x 768
2) I'm not a programmer
3) I'm *terrible* at math, and last but not least...
4) I'm a dummy who doesn't want to use *any* Microsoft
Pixel wrote:
Elton Woo [EMAIL PROTECTED] writes:
but Traktopel still sees my Logitech Optical usb (wheel) mouse as "usb
generic" and *not* "usb wheel". During "expert"
give /proc/bus/usb/devices
I did the above command, looged in as root, and this is
what I get:
On Saturday, Apr 14, 2001, Claudio wrote:
Hi all,
I friend of mine is trying MailMan from contribs, but he got 2 problems with
it on LM-8.0:
I'm about to upload a new Mailman package... works perfectly on 7.2, but
I'm not sure about the 8.0 prereleases.
--
[EMAIL PROTECTED], ICQ#:
On Saturday 14 April 2001 08:44 am, you wrote:
Yes, this is a developer's list but not everyone gets a stiffy over
..need to wave their
dicks around.
Please keep this list rated G for "good taste" please. Not genitalia.
Thanks!
--
pax
-m-
On Sat, 14 Apr 2001, Andrej Borsenkow wrote:
cat ~/.xsession-errors
...
/usr/bin/startkde: Clean: command not found
kdeinit: error while loading shared libraries: /lib/libsafe.so.2.0:
undefined symbol: __iswspace
ERROR: KUniqueApplication: Trying to launch kdeinit.
kdeinit: Shutting down
On Sat, 14 Apr 2001, Elton Woo wrote:
... wanna borrow *mine*??? I have a spare pair, since I hate the new bifocals,
and
prefer using contacts. Oh, and an addendum to my post above: I forgot to mention
that I'm dyslexic / dixlezkik ... whatever ! ROTFALMAO!
"Dyslexia -- Name for it by
Guillaume Rousse crivit :
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I may be dumb, but i can't install a flash plugin for konqueror on a fresh
cooker install.
Documentation make reference to a 'netscape plugin' tab in KDE control
center, that doesn't exists. All i found is an
cat ~/.xsession-errors
...
/usr/bin/startkde: Clean: command not found
kdeinit: error while loading shared libraries: /lib/libsafe.so.2.0:
undefined symbol: __iswspace
ERROR: KUniqueApplication: Trying to launch kdeinit.
kdeinit: Shutting down running client.
...
Is it the reason why arts is
Randy Kramer wrote:
The big problem is that, whichever choice I make, I then get the
following error message, and the installation hangs:
"Can't call method "set_active" on an undefined value"
PS: The system includes a Matsonic 8308 motherboard with on board video,
sound, and ethernet.
Also sprach Alexander Skwar:
So sprach Elton Woo am Fri, Apr 13, 2001 at 02:26:53PM -0400:
I've recently joined this list so I may have missed the
announcement. Could someone kindly
direct me where I may download the mandrake rpm package of Netscape
Communicator 4.77?
Have
Jason Straight wrote:
A couple things for xine
first the DVD drive has to be /dev/dvd which would be a link to the /dev/hda
or /dev/scd0 or whatever drive you are using.
PMJI, but (for me education, please? G). Cooker (beta 3) installed my
IDE DVD drive as /dev/cdrom. Does this mean
After updating system to the latest qt2/kde (downloaded today) I tried to
enable AA. The result was less then amusing - in konsole I lost menu! and
even mouse context menu had no visible text; in control center most text
was not visible at all so to disable AA I had to take wild guess where to
Pixel wrote:
Elton Woo [EMAIL PROTECTED] writes:
[root@dhcp-19-3461 elton]# /proc/bus/usb/devices
bash: /proc/bus/usb/devices: Permission denied
try
[root@dhcp-19-3461 elton]# cat /proc/bus/usb/devices
[root@dhcp-19-3461 elton]# cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00
Chmouel Boudjnah wrote:
Elton Woo [EMAIL PROTECTED] writes:
What *USB* devices are actually detected on
installation? AFAIK, at least mice and keyboards should be no problem,
do you have the usbd package installed and running ?
Certainly! ... since I merely
Elton Woo [EMAIL PROTECTED] writes:
[root@dhcp-19-3461 elton]# /proc/bus/usb/devices
bash: /proc/bus/usb/devices: Permission denied
try
[root@dhcp-19-3461 elton]# cat /proc/bus/usb/devices
"Mandrake COntrol Center" is a really long name. By default it overlaps
icons near this one; if I rearrange icons so that text does not overlap, I
get very large gap between icon columns.
Is it possible to wrap icon names like Windows does it? Starting from some
text length it looks better.
I upgraded to kernel 2.4.3-19 and the upgrade issues
remain. These are:
Although the new kernel placed its version in system,
config and vmlinuz... the links to them are to the
last one (in this case 2.4.3-17).
Initrd is not being created or is only creating
2.4.3-12 (which is the first kernel
Con Kolivas wrote:
On Sat, 14 Apr 2001 04:53, you wrote:
JoAnne wrote:
The Register: Data-corruption bug hits VIA chipsets(Apr 13, 2001, 15:10
UTC) (1719 reads) (4 talkbacks) (Posted by kreichard)
Dennis E. Powell writes to tell us about the Register's coverage: "The
kernel crowd
hi,
when i start the cooker intallation (yesterday's cooker) i cannot move my
mouse cursor. i have an ordinary microsoft 2 button mouse on ttyS0.
after booting the installed system the mouse works with gpm.
because of this i ran into problems when i had to select the packages. how do
i switch
Oh yes I failed to check it carefully. Who is the current maintainer of
samba? Wanna take a look at this, thanks?
Abel Cheung
On Sat, 14 Apr 2001, Ed Wilts wrote:
On Friday 13 April 2001 10:19, R.I.P. Deaddog wrote:
On Fri, 13 Apr 2001, Ed Wilts wrote:
The Samba uninstall utility
Vincent Meyer [EMAIL PROTECTED] writes:
Hello,
The recent perl update has been failing dependencies the last few days.. and
the packages kpackage complains about haven't been updated. Is it safe to
load this, and force it? or am I missing something?
force back perl-5.600 (and
"mdk mailin list (Harry)" wrote:
On 4/13/01 9:38 AM, "Elton Woo" [EMAIL PROTECTED] wrote:
But where
are the beautiful Princess Narda, and Lothar? ;-))
Lothar's there - check the name of some of the packages/projects they worked
on.
Harry
Well he *was* in Mandrake
Theres a new 0.3.5 rpm for mandrake at the author's website
(http://oss.mdamt.net/vcd/dist/)
=Spike=
bor@localhost% grep kdeinit =startkde
LD_BIND_NOW=true kdeinit +kcminit
bor@localhost% LD_BIND_NOW=true kdeinit +kcminit
kdeinit: error while loading shared libraries: /lib/libsafe.so.2.0:
undefined symbol: __iswspace
bor@localhost% rpm -q libsafe
libsafe-2.0-2mdk
bor@localhost% rpm -q glibc
michael wrote:
On Friday 13 April 2001 10:06 pm, you wrote:
Thanks for the clear answer! I actually rendered it moot by burning on to gold
cd's evidently the silver ones just aren't iso-metric ;-)
However, I am checking just for thoroughness' sake!
--
pax
-m-
On Sat, 14 Apr 2001, Elton Woo wrote:
Pixel wrote:
Elton Woo [EMAIL PROTECTED] writes:
but Traktopel still sees my Logitech Optical usb (wheel) mouse as "usb
generic" and *not* "usb wheel". During "expert"
give /proc/bus/usb/devices
I did the above command,
Blue Lizard wrote:
Never did that to me.
On 13 Apr 2001 14:12:03 -0400, Elton Woo wrote:
.. as much as I like KDE, I would also like to use
Gnome . As I haven't used Gnome much in the past, I'm unsure if
this is a Gnome or Mandrake problem: I'm on a cable connection, so
On Saturday 14 April 2001 19:46, Elton Woo wrote:
Jason Straight wrote:
A couple things for xine
first the DVD drive has to be /dev/dvd which would be a link to the
/dev/hda or /dev/scd0 or whatever drive you are using.
PMJI, but (for me education, please? G). Cooker (beta 3)
Alexander Skwar schreibe:
So sprach Elton Woo am Fri, Apr 13, 2001 at 02:26:53PM -0400:
I've recently joined this list so I may have missed the
announcement. Could someone kindly
direct me where I may download the mandrake rpm package of Netscape
Communicator 4.77?
Have a
When running make install on the latest kernel it
has problems in lilo because it did not delete the
setting for the old /boot/vmlinuz-2.4.3-17mdk using
the heading 243-17. In the past it would just create a
warning message when running lilo but this time it
actually kicked out with an error
Yes, indeed that was missing from the config file from my last clean install.
It USED to be automatic - did something in the installer change?
Adding this line makes XTraceroute, and probably all the other stuff
start working again. Many Thanks
V.
On Saturday 14 April 2001 19:06, you wrote:
No; when you use vlc, click on the button that says 'disc' and by default it
will look for /dev/dvd - just change that to /dev/cdrom (whereas /dev/cdrom
equals the dvd drive in question) and it will work (just did it last night).
Mike
-Original Message-
From: [EMAIL PROTECTED]
Elton,
Thanks for the response!
No I haven't tried disabling the on-board video -- I'm sure it would
work but my son would not be happy using an older video card for his
Windows games. I'd really like one of the developers to recognize the
problem -- it should not be hard to fix and it
On Sat, 14 Apr 2001 14:54:33 -0400
Elton Woo [EMAIL PROTECTED] [Re: [Cooker] even*further* comments on
Traktopel (beta3)] wrote :
Chmouel Boudjnah dclarait pour toute le monde (beau ou pas beau):
there is no 'e' at "tout le monde" ;-p
well in fact i do so much emails by day than
Congrats to all. The install went perfect.
regards
Dave
nope just need to 'ln -s /dev/cdrom /dev/dvd'
I didn't do anything special with my kernel.
On Saturday 14 April 2001 14:46, you wrote:
Jason Straight wrote:
A couple things for xine
first the DVD drive has to be /dev/dvd which would be a link to the
/dev/hda or /dev/scd0 or whatever
- Original Message -
From: "Vincent Meyer" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, April 14, 2001 1:29 PM
Subject: [Cooker] cdrecord
similar dependency problem cdrecord is needed by xcdroast-0.98-7mdk.
is it safe to force this, or does it need to be rebuilt?
v.
Andrej Borsenkow [EMAIL PROTECTED] writes:
On 13 Apr 2001, Blue Lizard wrote:
And all these users appear in kdm login user selection window because it
does not know anything abut them :-(
-andrej
Use the kdm configurator. In kde it is referred to as login manager.
I'm trying to accomplish the simple task of configuring eth0 using DrakConf in
RC1. I doesn't work.
First let me say this: Hiding "Configure Internet Access" and "Configure Local
Network" buttons behind the "Expert Mode" title actually makes draknet harder
to understand for a new user and/or
Chmouel Boudjnah dclarait pour toute le monde (beau ou pas beau):
well in fact i do so much emails by day than sometime i mispell a lot
of words, i think my french/hebrew is worse :-(.
hmmm.. that brings up a suggestion I have for your Mandrake guys
(and any other linux distros).
My point was completely missed as per usual. Oh well. At least the bloody
rpm is fixed now.
On Saturday 14 April 2001 14:48, michael wrote:
On Saturday 14 April 2001 08:44 am, you wrote:
Yes, this is a developer's list but not everyone gets a stiffy over
...need to wave their
On Saturday 14 April 2001 17:14, you wrote:
Elton,
Thanks for the response!
No I haven't tried disabling the on-board video -- I'm sure it would
work but my son would not be happy using an older video card for his
Windows games. I'd really like one of the developers to recognize the
Blue Lizard [EMAIL PROTECTED] writes:
[...]
I ve chosen full installation for Traktopel3 (install all packages), it took
about 3.5 hours ;) while when I tried to isntall Redhat FisherBeta, it took
only about 50 mins ;).
why?
which media? same size of package installed?
Graham Percival [EMAIL PROTECTED] writes:
Millions of electrons died to bring me this message. Was it worth it,
Nguyen Hung.Takeshi?
hi all!
I ve chosen full installation for Traktopel3 (install all packages), it took
about 3.5 hours ;) while when I tried to isntall Redhat FisherBeta,
Elton Woo [EMAIL PROTECTED] writes:
[...]
I was wondering *why* Openuniverse failed to run when invoked from the
menu.
It shouldn't be automatically installed if you don't have 3d support (just
checked in our data file, that's currently the case). Was it?
After reading the
Vincent Meyer [EMAIL PROTECTED] writes:
On Friday 13 April 2001 10:18, you wrote:
Vincent Meyer [EMAIL PROTECTED] writes:
GLUT: Fatal Error in openuniverse: OpenGL GLX extension not supported by
display: :0.0
It's a parameter to your X server.
If you don't have it, you
Guillaume Rousse [EMAIL PROTECTED] writes:
Ainsi parlait Vincent Meyer :
I did - and it's NOT listed. How do I tell X to turn it on? It has
worked in the past, so I know that the card can use it.
In your /etc/X11/XF86Config-4, in section modules, just check you have (or
add) :
#
Vincent Meyer [EMAIL PROTECTED] writes:
Yes, indeed that was missing from the config file from my last clean install.
It USED to be automatic - did something in the installer change?
Adding this line makes XTraceroute, and probably all the other stuff
start working again. Many Thanks
Well they said no linux to me too. typed dhcp and voila :)
They get all pissed when ya mention it :)
On 13 Apr 2001 22:51:02 -0800, michael wrote:
On Friday 13 April 2001 08:31 pm, you wrote:
Do you use? I use ATT Broadband (curse them) but not wireless.
If yes, what it like?
On 13
of words, i think my french/hebrew is worse :-(.
hehehe
I have discovered an odd thing that is a bit
frustrating. I like to use the meta keys to create
program shortcuts in sawfish. I have discovered that
for some unknown reason in cooker... gnome panel can
use meta-L but not meta-R and vice-versa in sawfish.
Why? Is this a bug or intended? If
1 - 100 of 102 matches
Mail list logo
