I have a beautiful 1A that I am selling. After restoration, one of the
nicest I have seen. Powder coated cabinet, polished aluminum front piece,
modern grounded power cord. Has the calibrator, print of the manual. Any
serious offers considered.
Good Morning Gentlemen
I require help in locating a service manual for the drake TR5 as I am trying to
restore one to
working condition. Even a copy of the wiring diagram / board layout would prove
an invaluable asset
in my quest. I am happy to pay via PayPal for this requested data. Robin
The temptation to solve the problem of the R7A has been very strong! I
removed the cover and carefully removed the DR7 card, sprayed all the
contacts on the connectors and de-oxidized the band change selector. After
installing the DR7 card again the problem has been solved !!! Thanks to
those who
It could also be as simple as the molex pins on the digital readout board.
Pry the board out a bit and re-seat them. Look the pins over for any cracks
in the solder.
Good luck!
Darrel, N0DBX
On 08/23/2018 11:49 AM, DW Harms (Dick) wrote:
Ciao Demis, your PLL needs adjustment I think
You
supply board hiding behind
the antenna switch on the right side of the front panel.
73 es GL
Lee WB6SSW
-Original Message-
From: Demis Bertoni
To: drakelist
Sent: Thu, Aug 23, 2018 9:30 am
Subject: [Drakelist] DRAKE R7A problem on change frequency band.
Hello!
I've a Drake
Ciao Demis, your PLL needs adjustment I think
You know how to do that?
73, Dick PA2DW
> Op 23 aug. 2018 om 18:29 heeft Demis Bertoni het volgende
> geschreven:
>
> Hello!
> I've a Drake R7A with a problem on changing frequency band.
> What happens is shown below:
>
> BAND SWITCH
Hello!
I've a Drake R7A with a problem on changing frequency band.
What happens is shown below:
BAND SWITCH DISPLAY
0-0.5 0-500 OK
0.5-1.0500-1000 OK
1.0-1.5 1000-1500 OK
1.5-2.0
looking for a front panel for a drake R4C radio.
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
I have two original and one reproduction R.L. Drake logbook. All in
excellent, unused condition. I would sell all three for $25.00 plus
shipping.
Rick Tucker
W0RT
---
This email has been checked for viruses by AVG.
http://www.avg.com
___
RV-4/AC-4 $425 (blue LED's installed)
MS-4/AC-4 $300
T-4XC $325 (blue LED's installed)
All excellent cosmetically and functionally.
Photos on request. Prices noted or offer plus shipping.
73, Bob
WØYVA
http://www.isquare.com/personal_pages/ras-hardware.htm
Drake "4 line" Crystals For Sale:
I have some crystals that can be used in the
Drake "4 line" to give additional frequency
coverage. The crystals say R-4 B on them, but
should be suitable for most any of the rigs
in the "4 line".
Crystal Frequency gives band coverage of
(All in MHz)
13.6 ->
Many Drake items ... microphones, TR-4C, RV-4, R-4C, T-4XC, Noise Blanker,
AC-4, DX Eng processor, etc etc ...
See here:
http://www.isquare.com/personal_pages/drake.htm
Thank you!
73, Bob
W0YVA
http://www.isquare.com/personal_pages/ras-hardware.htm
Hello all...I found a few manuals in my collection...T4, R4 and
MN2000...all original and in good condition
I figure 10 for each???
73
Bill
Wa2jhs
___
Drakelist mailing list
Drakelist@zerobeat.net
I have some crystals that can be used in the
Drake "4 line" to give additional frequency
coverage. The crystals say R-4 B on them, but
should be suitable for most any of the rigs
in the "4 line".
Crystal Frequency gives band coverage of
(All in MHz)
13.5 -> 2.4 to 2.9
13.6 -> 2.5 to 3.0
14.1
I have a nice R-4C that has an issue I have never seen before. The AGC only
functions in Slow mode. The AGC switch checks out as does the Function switch.
A previous owner had jumbled the wires to the AGC switch (probably trying to
fix the problem)- I am close to 100% sure they are now
Hello Demis,
Guess the PLL needs adjustment, check the procedure in the service manual. I
had something similar in my TR7 which was solved that way.
73, Dick PA2DW
Verstuurd vanaf mijn iPhone
> Op 10 okt. 2017 om 10:55 heeft Demis Bertoni het volgende
> geschreven:
>
>
Hi All,
I've problem with my R7A, this morning during a QSO at 14,222, the
reception frequency jumped directly to 12,222 for a few seconds to return
to 14,222. I tried to rotate the band switch, the up and down buttons, but
occasionally the frequency jumps. Where's the problem?
Do you have a
Drake Items For Sale:
.
.
Drake 1525 EM DTMF Touch Tone Microphone
This is the mic that was used to add a touchtone pad to
many rigs in the 70s and 80s. Four pin mic plug.
This one has been used, but is in good shape and
includes paper work. $35
.
.
Drake TV-3300-LP Low Pass TVI Filter:
A
Anyone have a 6 meter transverter for my C-Line?
Thanks,
Milt Taylor, WA3MDS
Sent from my iPad
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
Hello all. Just testing the water here. I have some Drake equipment including a
C-Line, two tranceivers and external VFO's, a tuner, and speakers ,power
supplies, etc. I was wondering if there is a good Kenwood tech here. I have a
very nice looking TS-930 with all the bells and whistles that
Hi Bob,
On Wed, 7 Sep 2016 14:09:05 -0500, Bob Burkett wrote:
>I am engaged in repair of a Drake TR-7. Would someone please tell me where
>I can buy some of the small intra-board coax cables? If I have to make
>them, where do I get the connectors ... and by what name do I refer to them?
This
I am new to this forum, so bear with me.
I am engaged in repair of a Drake TR-7. Would someone please tell me where
I can buy some of the small intra-board coax cables? If I have to make
them, where do I get the connectors ... and by what name do I refer to them?
Is there a list of reputable
and the R-8A isn't sideband selectable. Unlike some
synchronous detectors, the one on the R-8B works quite well in my
experience.
Hope this helps.
Art, KB3FJO
Date: Wed, 20 Jul 2016 00:40:37 +
From: k7...@comcast.net
To: drakelist@zerobeat.net
Subject: [Drakelist] Drake R-8 vs R-8b
A close friend who is facing some health challenges is considering a Drake R-8
or a R-8B receiver, among others including a R-1000. FRG-7000. What is the
difference between the R-8 and R-8B when considering Drake?
Thank you joe k7mks
___
Drakelist
I will have a large auction of Drake, C line, 7 line and assys,, on Sat.
Nov.5th. You can attend in person or via internet. Details will be posted
later. (also much Collins, JRC, Johnson, etc and towers and ants. Tnx & 73's,
Jenks K5YNZ
___
Drakelist
Hi Guys
I am looking for a good photo of the top and bottom of the circuit
board in the Drake TR4 PTO. If you have these photos please email them
to me I really need them.
73 John WJ4PB
___
Drakelist mailing list
Drakelist@zerobeat.net
Drake Wattmeters and other Drake Items For Sale:
Drake WH-7 HF Wattmeter:
The Drake WH-7 is a directional through-line wattmeter
for 1.8 to 30 MHz that matches the TR-7 series, although
it can be used with any HF rigs. A removable coupler
provides remote metering and allows convenient
Joe,
I can’t say for sure but I doubt any cabinets were shipped without the
lettering. The single letters on the back were to match up receiver /
transmitter mixer crystal drift characteristics, is Red, Green, and Blue.
73, Gary___
Drakelist mailing
Did Drake release new B-line cabinets without any white letting on the R-4B
cabinets such as S-meter zero, Phone jack Notch on the R-4B and Anti-Vox Vox
Mic on the TX-4B or were the cabinets shipped pure black with no white
lettering?
What is the significance of a large letter ":C" stamped in
Hello,
I have for sale.
TR-4C sideband transceiver, no noise blanker,
RV-4 remote VFO,
AC-4 power supply,
MS-4 speaker
Digital readout (DD-103 Universal Digital Dial) by Electronic Specialty
Products LLC
Have 2 sets of final too.
No microphone or watt meter.
I am the original owner.
Anyone interested in a L4B amp? Message me for details if you are. Price is
$1100.00 Possible meet for pick-up,depends on your location. KC4WNI
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
==
DRAKE STATION:T-XB. R-4B, PS, two MS-4 speakers, MN-2000 ATU, and DRAKE
1000 watt low pass filter, Drake DL-1000 Dummy Load,
D-104 desk mic... was listed for$899
Price lowered to $499 but you have to arrange shipping.
Paul,
If my memory serves me right, and that’s rare anymore, HI HI ... try
replacing C107, a 60 mfd electrolytic capacitor in your T-4XC.
73, Gary___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
good evening guys
I would like to ask for advice on the repair of a pair of drake t-4XC that have
a similar problem.
the first:
During transmission in cw, sidetone returns normally, except that in addition
to the manipulation telegraph with a normal note, has a second whistle with the
same
Sent from my iPad
Begin forwarded message:
> From: Gary Thostenson
> Date: December 16, 2015 at 4:47:55 PM CST
> To: drakel...@zerobeat.com
> Subject: Drake filters
>
> The fl-250 has been sold. I still have the fl-500 and the
> Fl-1500. They are still $90.00 a
Drake items for sale
DTMF Touch Tone Microphone, Low Pass Filters, plus
many original Drake manuals
Drake 1525 EM Touchtone DTMF Microphone
This is the mic that was used to add a touchtone pad to
many rigs in the 70s and 80s. It is a normal hand mic
from the front, but has a touchtone pad on
I have for sale 2(two) MS4 speakers. Both of them Have been professionally
refurbished and restored. They are near collector quality. Price is firm at
ninety dollars each and buyer to pay shipping by the carrier of your
choice. Pictures on request. Bill Watson KC4WNI
Hello everyone
I have broken up the station and am selling each item spate (will also
entertain a bundle)
1) Hallicrafters SX-115 $1200.00 Beautiful condition
2) National HRO-60 Beautiful condition. $500
.
3) Viking Ranger II $450. Very nice condion
4) Viking ranger I $200.
Does anyone have a source for or willing to part with the original front
two feet for an R8 Receiver? Mine didn't come with the correct ones. The
originals probably broke off in the past? Name your price. Thanks
Jim W7JWT___
Drakelist mailing
Drake MN-4 C Antenna Tuner and Related Items For Sale:
Drake MN-4 C
The Drake MN-4 C is a 300 watt antenna tuner covering from
160 thru 10 meters. It features a very large wattmeter, that
can also read SWR. There is also an antenna switch built in.
The MN-4 C is much different than the plain
I reluctantly am selling my wonderful Drake equipment, and I wanted to give all
of you a chance before going to other sites.
This equipment is Premium quality. Cosmetics are wonderful. All units work
well. Currently working as a complete station and I would be glad to QSO on the
air with a
New in original box with original Drake documentation. Very rare Drake Model
1544 RV75/R7/R75 Adapter Kit.
Allows R7(A)/TR7(A) to share an RV75 synthesized VFO.
Photos on request.
Best offer.
Dr. Bruce Felder, K3BF
Pensacola, FL
___
Drakelist
For Sale, Drake TR4CWrit. SN 44110 Has been checked and serviced in April
2014. SSB filters swept,have results. Pictures on request. $600.00 Buyer
pays shipping no noise blanker. email for more info, Bill, KC4WNI, Kentucky
___
Drakelist mailing list
Hello Drakelist. I am a collector of Drake who is now unCollecting his
collection. My call is W8WO.
My collection includes: a 1A; an unmodified C-Line purchased in 1977 along
with an L-4B; a TR-4 and RV-4; an SPR-4 and FS-4; a 2B and 2BQ; plus other
Drake gear, including a Theta-550
Hello, I am looking for the FA-7 for my TR-7. I plan on using it for the
PS-7. Help in finding one will be appreciated. Maybe you know a replacement
fan that would work? If you do, any part number or company name will help
in the search. 73, Bill, KC4WNI
On Sun, 21 Jun 2015 18:45:17 -0700, Bill Watson wrote:
Hello, I am looking for the FA-7 for my TR-7. I plan on using it for the
PS-7. Help in finding one will be appreciated. Maybe you know a replacement
fan that would work? If you do, any part number or company name will help
in the search. 73,
Hi Bill,
Most any 110V fan that fits the hole pattern will work. Most are a bit
faster and noisier than the FA-7 fan but I used to work with broadcast
transmitters so fan nose never bothered me. There are 12V fans available that
also fit the hole pattern but they don't seem to move as
On Sun, 21 Jun 2015 23:59:09 -0500, Jim Shorney wrote:
The FA-7 is an off-the-shelf fan.
Ah, here we go: Comair/Roton Sprite model SU2C1, 1900rpm, 20cfm of airflow,
noise output of only 26.2dba.
Drake UV-3 Transceiver, Power Supply, Low Pass TVI Filter For Sale:
Classic Drake UV-3, 2 meter/440 MHz FM Transceiver:
The UV-3 was manufactured by the R.L.Drake Company in Miamisburg
Ohio in the late 1970's. It is a classic!
It is fully synthesized and covers both the 2 meter and 440 MHz
Hello To All, I am looking for the CW 75 keyer component to match the Drake
7 line. Looking for one in very good shape. 73, Bill, KC4WNI
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
I have 4 new ones. $30 shipped.
Dr. Bruce Felder, K3BF
Pensacola, FL
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
Hi to the group:
I need a little help. Does anyone on the list know
of someone who repairs the Drake FS-4 synthesizers?
If so please let me know. I have one that needs a little
TLC done to it. Please email me at my QRZ email address.
Thanks very much. Gary W9VS
---
This email has been checked
Anyone know of a hand-held mic to use with a TR7? Such as a model
number,brand name. Just want to try a hand-held. I'll take some suggestions
on what works and what doesn't. 73, KC4WNI
___
Drakelist mailing list
Drakelist@zerobeat.net
Bill,
The matching hand mic for the TR-7 was the 7073DM .
73, Gary___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
The Drake 7073DM made for the TR7, made in Japan, works great. Section 2-4.3 in
the owners manual explains the proper mic selection and Fig. 2-3 shows the
wiring diagram.
Steve w7jsc
From: Bill Watson
Sent: Thursday, March 05, 2015 4:24 PM
To: drakelist@zerobeat.net
Subject: [Drakelist
Hello To All, Can anyone tell me how difficult it is to find the Drake WH7
wattmeter and any idea what the going price would be? Seems not many are
available. Any feedback appreciated. 73, Bill, KC4WNI
___
Drakelist mailing list
Drakelist@zerobeat.net
Hello, I am looking for the AUX-7 board for the Drake TR7 and also
interested in the DR-7 also. Any help much appreciated. 73,Bill, KC4WNI
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
I have an original R.L. Drake logbook from back in the day. Excellent, as
new condition.
Also two of the reproductions purchased from Joseph Roth in 2007.
Asking $25.00 plus few dollars for postage for all.
Rick Tucker
W0RT
___
Drakelist
Hi to the group:
I have a Drake C-4 Station console for sale.
It's also listed on QTH with a picture.
Asking $200.00 plus $25.00 for shipping.
Thanks very much.
Gary W9VS
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
Members:
In order for me to enter the solid-state ham radio world I need to sell some
of my coveted Drake equipment to folk who appreciates vintage Drake quality
and its history.
For sale is a Drake TR-4C transceiver, serial #36799 (with full set of
10-meter crystals), accompanying AC-4
...@sbcglobal.net
To: drakelist drakelist@zerobeat.net
Sent: Tue, Feb 10, 2015 1:32 pm
Subject: [Drakelist] Drake TR-4C rig for sale.
Members:
In order for me to enter the solid-state ham radio world I need to sell some of
my coveted Drake equipment to folk who appreciates vintage Drake quality and
its
need crystals for drake 2a 80meters and any others thanks RED N9GHE
---
This email is free from viruses and malware because avast! Antivirus protection
is active.
http://www.avast.com
___
Drakelist mailing list
Drakelist@zerobeat.net
FL-2100 F$400 plus shipping
2C and 2NT in excellent condition available for $500plus shipping
from 22554. Includes calibrator in 2C. Will ship double-boxed in
two packages. Works great and hate to sell but I can use only so
many radios! Also have stock R-4C for $325 plus shipping and stock
Hello all,
Any of you have a TR7 500khz filter that you feel is excess and would
like to sell?
Contact
Carl WD8NHK _gypsymt34@aol.com_ (mailto:gypsym...@aol.com) ___
Drakelist mailing list
Drakelist@zerobeat.net
Hi Folks, A fellow Drakester came through...thanks for reading. Carl
wd8nhk
In a message dated 11/22/2014 11:43:00 A.M. Eastern Standard Time,
gypsym...@aol.com writes:
Hello all,
Any of you have a TR7 500khz filter that you feel is excess and would
like to sell?
Carl WD8NHK
- Original Message -
From: Charles Bostian bost...@vt.edu
To: drakelist@zerobeat.net
Sent: Friday, November 14, 2014 1:58 PM
Subject: [Drakelist] Drake R4B 5595 kHz oscillator/mixer
I am trying to bring my old R4B/T4XB combination back to
life after about
35 years of non-use
- From: Charles Bostian bost...@vt.edu
To: drakelist@zerobeat.net
Sent: Friday, November 14, 2014 1:58 PM
Subject: [Drakelist] Drake R4B 5595 kHz oscillator/mixer
I am trying to bring my old R4B/T4XB combination back to life after about
35 years of non-use.
The 5595 kHz oscillator part
My thanks to everyone who has sent me ideas. At one of your suggestions I
built a simple circuit to check the xtal performance. It works fine -
series resonant at 5563.3 kHz and parallel resonant between 5599.1 and
5599.3 kHz. So the problem must be in the four caps I haven't checked
yet.
To: drakelist@zerobeat.net
Sent: Friday, November 14, 2014 1:58 PM
Subject: [Drakelist] Drake R4B 5595 kHz oscillator/mixer
I am trying to bring my old R4B/T4XB combination back to life after
about
35 years of non-use.
The 5595 kHz oscillator part of the second mixer 12BE6 circuit
I am trying to bring my old R4B/T4XB combination back to life after about
35 years of non-use.
The 5595 kHz oscillator part of the second mixer 12BE6 circuit does not
oscillate. I have tried several tubes with no effect. As far as I can
determine, the tube is functioning normally and I can make
Trying again on this: has anyone had a problem with the coax lead from
the up converter to the high pass filter in the TR-7? I cannot get the
coax to stay plugged in. Not sure if I'm just not doing it quite right
or if there's a problem with the little fitting on the high pass filter
switch
The center conductor needs to be in precise alignment with the small socket
hole that it fits into. Not that easy to do by feel, you really need to get a
light and eyes on it. Unless the socket has been clipped short by someone who
mistook it for an ordinary component leg or the open end is
Is this it?
http://www.tubezone.net/pdf/8643.pdf
On Thu, 23 Oct 2014 16:41:17 -0400, Ted Schurter wrote:
Dear fellow Drake enthusiasts,
I know this may be a long shot, but I am attempting to get a TC-2, two meter
transmitting converter on the air. It basically works, but has low output
Looking for the Drake internal crystal calibrator for the 2B.
Please contact Tom, ABØJ.
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
The single wire jumper that connects the DR-7 to the high pass filter module
should toggle to ground as you turn the band switch, this resets the DR-7. I
have had a bad U9005 or U9006 bad in the past. The actual receive will be off
as well.
73,
Hi,
I bought my first Drake about 25 years ago. Sold it later and then bought
another one, which was also sold.
Recently I acquired a Drake TR4C which this time around will be a keeper.
Hard to believe, that after 40 years, they still sound pretty damn good and
are great performers.
Thanks
Drake 2AQ for sale. Matches 2B receiver. Works well. Looks good.
Pictures available. Price: $150 includes shipping CONUS.
George K4GM
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
Oops, sorry, the pairs I have are for the T-4XB and R-4XB, not the T-4XB and
R-4C.
Mike, W1MU
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
Have you looked at ExpressPCB/ExpressSCH? Great for what you are
describing and the software is free.
Rick KD6ZR
On 1/22/2014 8:42 PM, Doug Smith wrote:
Thanks Mike. Good info.
I took a look at circad --- whew! Pricey.. I've got a couple of
projects that I've been wanting to have a
THe only problem with the captive freeware from the places like
Express is that you cannot do anything else with the result. Not even
print out the board layouts--only send them in to have them made.
There are several free packages...some good, others not so much, that do
the same and are
Eagle PCB Cad will kick some butt, but it’s a steep learning curve
Free, for the trial version with no restrictions other than no pcb bigger than
3 x 4 inches
I would never use software that locks into one company, ties all your work to
them.
Mike Bryce WB8VGE
proso...@sssnet.com
On Jan
Thanks Mike. Good info.
I took a look at circad — whew! Pricey.. I’ve got a couple of projects that
I’ve been wanting to have a board or two made up but not at that level of
professionalism!
73,
Doug, W7KF
On Jan 20, 2014, at 10:04 PM, Mike Bryce proso...@sssnet.com wrote:
Gang
The
Thanks, Mike. I'll have to give them a look. Purple is the color of royalty,
you know.
73
-Jim
NU0C
On Tue, 21 Jan 2014 00:04:46 -0500, Mike Bryce wrote:
Gang
The purple pcbs are made by a company called osh park.
He ( they) have a thing for purple. Even the mailing envelopes are purple.
Boys and girls…
I’ve been working on a replacement calibrator for the drake R4b. This
calibrator will output 100, 50, and 25 kHz signals. You select the output with
a dip jumper. The output also pulses on and off, and again, you can turn that
off if you don’t want it.
it has the same
It's PURPLE! Now I want to go find an R4B just so I can buy one.
Where do you get purple boards made, Mike?
73
-Jim
NU0C
On Mon, 20 Jan 2014 14:16:28 -0500, Mike Bryce wrote:
Boys and girls
Ive been working on a replacement calibrator for the drake R4b. This
calibrator will output 100,
Found myself wondering the same thing. Where do you get your boards made?
And, what software do you use to lay them out? I ask because I have two of the
AC-4r kits and greatly admired the boards.
73,
Doug, W7KF
http://www.w7kf.com
On Jan 20, 2014, at 9:36 PM, Jim Shorney
Gang
The purple pcbs are made by a company called osh park.
He ( they) have a thing for purple. Even the mailing envelopes are purple.
All the prototypes are purple. Go figure.
I use circad for the pcb layout software. I am currently teaching myself eagle.
That's been slow.
Mike wb8vge
Talking about Drake dials, I'd like make a WARNING to the group. (I have told
this story before, but a long time ago. The warning my save some VFO dials.)
Back in the middle ages, (the 60s), I had a TR-4 with metal gears in the VFO
dial train. I was in the habit of spinning the dial up
Gang,
We all know that the RTL parts used in the calibrator are no longer being made.
So, if your calibrator in your R4B goes kaput, then you're screwed.
This year at the dayton hamvention I talked to Ron, WB4HFN, about the problem
and he sent me a broken calibrator board. I needed the
Looking to purchase a Drake MS-4 Speaker to go with my collector condition
Drake TR-4CW/RIT. Must be in pristine condition. I don't need the AC-4
Supply, but would consider that too if in same great condition. No
scratches, corrosion or dings of any kind. Non-Smoking shack. Original
Packaging
I have replaced the filter caps in the power supply TR4C several times,
and that is a sure-fix usually for hum, and helps in other ways also.
Walt-W0EDS___
Drakelist mailing list
Drakelist@zerobeat.net
Does anyone on the list know how to find out what part T1 is in the 2-NB?
I would like to be able to build a clone and that is the only part that
hasn't been identified as to its values. Also, since these units are very
rare, it would be good to know how to replace them is one needed to after
Looking to sell my TR4C. Needs small bit of work. Band switch I guess. I
would
really like to keep this rig, but medical b ills getting deep.
TR4C
AC-4 power supply. Started to do HV mod, but cant see it that well, but the
voltages look correct. Mod almost finished.
Thanks for your time.
John
http://www.rldrake.com/support-repair.php
On Tue, Jul 23, 2013 at 10:19 PM, dave streight w5kow...@yahoo.com wrote:
who does repair on the drake tr 7 radios??
___
Drakelist mailing list
Drakelist@zerobeat.net
who does repair on the drake tr 7 radios??___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
many thanks to all...:-)
IK1QHB Paolo Emanuelli
Il giorno 02/giu/2013, alle ore 01:17, Paolo Emanuelli IK1QHB
ik1...@fastwebnet.it ha scritto:
I am looking for anybody who could tell me where to find the inlay for small
knobs present on the TR7-R7 drake.
I have try to wrote to
: Sun, 2 Jun 2013 01:17:08 +0200
From: Paolo Emanuelli IK1QHB ik1...@fastwebnet.it
To: drakelist@zerobeat.net
Subject: [Drakelist] Drake try small knob inlay: where?
Message-ID: 357bf686-b20d-45a5-a600-45f444fb9...@fastwebnet.it
Content-Type: text/plain; charset=us-ascii
I am looking for anybody
I am looking for anybody who could tell me where to find the inlay for small knobs present on the TR7-R7 drake.I have try to wrote to www.daviesmolding.com and i am waiting for reply at the moment...Any other suggestions???73
Paolo Emanuelli IK1QHB ik1...@fastwebnet.it
You are cordially invited to attend...
The Drake Forum
Saturday, May 18, 2013.
10:30-11:30 AM.
Room 2.
Excellent presentations.
Ask the Experts QA.
Free collectable Drake logo pens for first 100 attendees.
Free raffle tickets.
Many prizes including new, dual band, HT.
More details under
Hi OMI am looking for a good tr7 over serial number 5000, but in EU...There are many good offers in USA, but tax are really expensive for us in EU...I am try to looking for, in EU.Is there someone want to sale a good TR7 ( with RV7 and PS7 ) with filters?Please reply to ik1...@fastwebnet.it73 to
1 - 100 of 1400 matches
Mail list logo