thon...)
73,
Mike ab3ap
On Thu, Mar 1, 2018 at 3:07 PM, Steve Sergeant wrote:
> Here's a suggestion across the line, from the KX2 to the K3S:
>
> I'd like to have the option to display and set transmit power in dBm
> rather than linear watts. Conceptually, it makes more sens
m but I do need to
change the pwr and of course when changing pwr I end up changing the cmp.
Mike W9RE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto
SOLD
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
You may want to upgrade the firmware to version 2.89.
Mike / KK5F
-Original Message-
>From: Richard Day
>Sent: Feb 19, 2018 12:53 PM
>To: Elecraft@mailman.qth.net
>Subject: [Elecraft] Strange CW at each button push
>
>On my last two SOTA activations, my KX2 app
Like new condition with the latest firmware installed. Perfect. Includes
original cables for connection to KX3 transceiver. Also includes Side KX end
panels and cover as shown. (I will also send along the original end panels.)
$485 ai6ii (at) arrl.net Thanks 73 ..mike AI6II
--
Sent from: http
Members only.
Regards,
Mike VP8NO
On 15/02/2018 14:37, donov...@starpower.net wrote:
The 5.2 MHz SSB exciter construction article that Ian referred to
in January 1949 QST is here:
http://p1k.arrl.org/pubs_archive/29327
73
Frank
W3LPL
While in CW mode, I typically listen with the filter wide open (2.8khz). Once I
find a signal, I narrow the filter down (400hz) by tapping the AF knob after
tapping the FIL button.
Opening up the filter (back to search mode) requires lots of cranking on the AF
knob (back to 2.8khz) after tappi
Yes, it's normal. There is a config parameter you can set to eliminate
this behavior.
I can't think of it at the moment, but someone on this list will surely
remember what it is.
- 73 and good DX de Mike, K6MKF, Past President - NCDXC
> -Original Message-
> Fro
Everything old is new again ...
- 73 and good DX de Mike, K6MKF, Past President - NCDXC
> -Original Message-
> From: elecraft-boun...@mailman.qth.net [mailto:elecraft-
> boun...@mailman.qth.net] On Behalf Of David Gilbert
> Sent: Wednesday, February 07, 2018 3:31 PM
&g
G'day,
Am I the only one being bombarded by old posts? 50+ turned up this
morning, some going back to 29th January.
Regards,
Mike VP8NO
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I seem to have misplaced the data cable that connects the Kpod to my K3. Is
this any kind of standard cable or do I need to get a new one from Elecraft?
Thanks.
Mike KD8RQE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
pancakes
were just fine. The moral of this is ... buy the mix.
Seriously, check your knobs and buttons.
73, Mike WA5POK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.
audio level drop.
73,
Mike K2MK
Roger D Johnson wrote
> I noticed that during the contest, that if I selected 50 or 100 Hz
> selectivity,
> the audio would drop way down. It didn't used to be this way. I tried
> reloading
> an earlier version of the software but couldn&
Thanks guys, I should've RTFM better.
Mike KD8RQE
-Original Message-
From: Dennis Moore
To: kd8rqe
Sent: Sun, Feb 4, 2018 9:50 am
Subject: Re: [Elecraft] Kpod data cable
Look on page 19 of the owner's manual. If you use just any standard
cable you can watch your VFO
#x27;m running LP Bridge and at least one
logging program and a K-Pod but have no other macros that directly deal
with the SPKRS parameters. My sub Rx card is an older version retrieved
from my original K3.
A cure or a work-around would be nice,
Mike, AB9V
On 1/30/2018 11:21 AM, Chester Lata
and it really takes a bit of a fine
touch to continually tune with one hand while the op is transmitting.
But it's all part of the fun! It puts out about 5 W to 6 W.
And then Agent 99... :-D
73!
Mike ab3ap
On 01/28/2018 06:11 PM, Mark E. Musick wrote:
Not a problem Mike. It is
Sorry! Soon as I hit 'send' I realized I sent to the wrong group.
73,
Mike ab3ap (K1, K2, K3 op!)
On 01/28/2018 05:46 PM, Mike Markowski wrote:
Some photos of my effort!
http://udel.edu/~mm/ham/bayouJumper/
73,
Some photos of my effort!
http://udel.edu/~mm/ham/bayouJumper/
73,
Mike ab3ap
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
- Forwarded Message - From: Mike Streeter To:
elecraft...@yahoogroups.com Sent: Saturday,
January 27, 2018 12:04:40 PM CSTSubject: KPA500 Power out query.
I am driving my KPA500 with my K3 to a Mosley PRO 67. On every band except 20
meters 25 watts out from the
Latest from Hal's GPS:
Hal Turley
Jan 27, 20183:58:30 PM
Speed: 10.19 mph
Course: E
Elevation: -5.58 ft.
Lat: -54.512111
Lon: -18.071243
- 73 and good DX de Mike, K6MKF, Past President - NCDXC
> -Original Message-
> Fro
adapter for another
antenna on 2 meters, and no problems with the SMA adapter on the kx3.
thanks if anyone has some thoughts on it.
Mike AB7RU
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
If you can stretch to $165, Kent Engineering paddles (
http://www.kent-engineers.com/ ) are very good.
73,
Mike ab3ap
Am 13.01.2018 3:56 nachm. schrieb "Niel Skousen"
:
so all the HexKey discussion has awakened an itch to ask
What's the 'best' paddles u
ble to arrange even trade for a new K3s/KPA1500/P3
combo!
Good luck!
Mike / KK5F
EHKCA Member 13P-237784
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:E
- 73 and good DX de Mike, K6MKF, Past President - NCDXC
> -Original Message-
> From: Mike Flowers [mailto:mike.flow...@gmail.com]
> Sent: Sunday, January 07, 2018 2:32 PM
> To: 'tomb18'
> Subject: RE: [Elecraft] Very off topic, but trying to get info...
>
deal, was just curious
why it was forcing s different channel selection before it begins channel
hopping.
Yes, the channels are all in adjacent men slots, 00-28 and all of these use
* prefix. Are you saying I have to assign CH 00 (or 99?)without the * to
get this to scan without giving the RCL REQ?
Th
I have
to find a different men channel besides the one that first shows up?
What is "RCL REQ"?
Thanks,
Mike AB7RU
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qt
.?) have made it
a snap.
73 es HNY,
Mike ab3ap
ab3ap$ k3
k3$ a <-- Where is VFO A tuned?
7030.000 kHz
k3$ a 7025 <-- Tune VFO A to 7025 kHz
k3$ a <-- Verify
7025.000 kHz
k3$ b <-- VFO B?
7045.000 kHz
k3$ a 7025 1.3 <-- Set VFO A to SPLIT
k3$ b
7026.300 kHz
k3$ a 7025 0
scanning repeaters on 2 mtrs.
Mike AB7RU
On Dec 28, 2017 1:04 PM, "jollyto" wrote:
> Hi Don:
>
> Thanks for the reply. I am aware of the scan speed.
> It would be nice to configure the Scan 'Pause' delay.
>
> 73 de Jose
>
>
>
>
>
&
!
Mike AB7RU
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email
Don:
I wonder if this is a result of rushing the rig to market instead of
getting things correct first.
--
*73 De Mike*
*VE3YF
_/http://www.ve3yf.com/_*
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
This sounds like a fun area to study, Thanks for putting me on the path. I
will look up KK7B's work.
KV4TT - Mike
On Fri, Dec 22, 2017 at 12:37 PM, Don Wilhelm
wrote:
> Mike,
>
> Think of the 8kHz shift similar to a low frequency (8kHz) IF if your
> thinking is along the li
I just received mine. It was ordered nov 27th and arrived today in CA. I never
received anything other than an email receipt too. With Xmas mailings going on
give it 3 wks then contact them if needed. Mike KF6KXG
Sent from my iPhone
> On Dec 14, 2017, at 2:42 PM, elecraft-r
The Elf on the Shelf ... where the KPA1500 should be ... ;>)
- 73 and good DX de Mike, K6MKF, Past President - NCDXC
> -Original Message-
> From: elecraft-boun...@mailman.qth.net [mailto:elecraft-
> boun...@mailman.qth.net] On Behalf Of Mike Markowski
> Sent: Tuesday, De
I recognize you. You're that mischief-making Christmas elf! :-D
Vy 73,
Mike ab3ap
On 12/12/2017 06:11 PM, ROBERT MUELLER wrote:
Why don't we tell Wayne it is time to stop tweaking and start telling
us what their production schedule is and when they will start
shipping. If they inte
son. I
plan on Santa bringing me all kinds of ham test equipment. Signal
Generator, Freq counters antennas analyzers you name it.
Mike AB7RU
On Mon, Nov 27, 2017 at 9:01 AM, James Austin wrote:
> Hi Mike,
>
> Did you get any useful off list replies to this question? I've had the
>
Wayne:
Maybe just me, but I have yet to hear or see HI, again they elude me on
160CW
--
*73 De Mike*
*VE3YF
_/http://www.ve3yf.com/_*
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
what what Elecraft could do in the
analyzer department!
73, Mike WA5POK
On Friday, December 1, 2017 12:35 PM, Michael Walker
wrote:
The RigExpert AA-1400 fits perfectly in a $40 Pelican 1200 case.
I have mine, charger, batteries, etc in a nice Red 1200.
I would post a pic, but you
It would be nice if Elecraft had their own branded analyzer. It could be a semi
kit like the
graphing one being sold from Germany. 73 Mike KF6KXG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
These were very useful devices from "back in the day". I see a couple
available on ebay by searching for "Palomar noise bridge"
Mike, AB9V
On 12/1/2017 7:49 AM, w5...@comcast.net wrote:
just a quick question for the collective group here. I have built up my KX-2
travel
m rig makers seem universally to lack the intelligence to implement
iambic mode A on any of their rigs. The unfortunate owner is forced to use the
abominable mode B, or to not use iambic keying at all. Elecraft has always
allowed selection of either mode.
. Anyone else have issues with this and how did you resolve? I
almost wonder if some locktite would help?*
*Thanks! Mike AB7RU*
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
Good evening all I have a K3 and want to add the sub receiver I have the new
KSYN3A in my K3 but is my DSP board comparable? My DSP board in the K3 is rev C
Mike
VE3WDM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
ave a copy of the manual, however, without being able to see or touch
the thing life is difficult. Similarly getting some sense out of the
other op.
As far as I can tell the KX3 isn't in split, doesn't have any RIT/XIT.
Any other reason why this 1kHz offset should be happening.
Regar
lever with what ever spacing between
the paddles you want.
Hope this helps.
73
Mike KD8RQE
In a message dated 11/9/2017 9:31:16 A.M. Eastern Standard Time,
jso...@comcast.net writes:
Hello,
I'm a "no-code-ham" determined to become a "know-code-ham" and so hav
Don,
As always, thank you for that detailed information. I do have a set of
2.04r firmware to install as I go through my A-to-B mod list.
Best regards,
Mike M.
KU4QO
On Fri, Nov 3, 2017 at 9:39 AM, Don Wilhelm wrote:
> Mike,
>
> Order the SMT1B - PIN diode on carrier board p/n E12
A has been set, duty cycle and ambient temp.
If you don't like the mosquito then blow the KPA100 heat sink with a
small 12V PC fan. This is what I did during weeks of overnight QRSS
beaconing on 40M for the RSGB propagation committee grey line study.
Make of it what you wish.
R
Hey Don,
Is it true that you can draw the entire K2 schematic from memory?
I learn something every time I read one of your posts. Thanks a zillion for
all the help you give out on here. We all owe you a beer or three.
--
73,
Mike Cizek WØVTT
-Original Message-
From: elecraft-boun
cement, or maybe someone out there has
the correct part that they could sell me?
Thanks and regards,
Mike M.
KU4QO
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfa
The N6TV Acc port devices work great. Allow 4 attachements to the ACC
15 pin lines and much much more.
On 10/31/2017 3:04 PM, Don Wilhelm wrote:
Alan,
Not having that amplifier, I cannot give you a positive answer, but I
can tell you how to determine if the BAND DATA outputs of the ACC
con
nse.
TWO KSYN3 synthesizer boards, rev A. Removed in April 2015.
TWO K3STFNR shield stiffener kits for the synthesizers; never installed.
$150 for all four or offers.
Paypal to mgcizek at gmail dot com or Postal money order. Thank you.
--
73,
M
Does anyone on the list have a spare 500 hz 8 pole filter they would like to
part with?
Mike
VE3WDM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
10/29/2017 8:33 PM, W0MU Mike Fatchett wrote:
It seems that FT8 users are about the only using the band.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Well said.
Over 100 of my 700 and growing FT8 contacts have been on 160. OH
NO! Ham radio is doomed. It seems that FT8 users are about the
only using the band. I might have 3 DX contacts. I am certain that
300 countries is going to be a long long adventure for FT8 on 160. I
dou
Running on 120v for years no problems ever.
W0MU
On 10/29/2017 8:23 PM, Robert G Strickland wrote:
What's the conventional wisdom on running the KPA500 on 110v? At my
previous QTH I had 220v, so never had to face this issue. In my new
QTH there's no 220v -yet. The operating environment is 100
Does anyone want to sell their KPA3 if they have upgraded to newer KPA3A?
Mike
VE3WDM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
Honestly they should make that a simple field replaceable part.
On 10/27/2017 1:02 PM, Dave Hachadorian wrote:
Diode D5 on the KXV3 is one weak link. A more robust replacement
is available from Digikey for $0.42
https://marc.info/?l=elecraft&m=145323127930319&w=2
Dave Hachadorian, K6LL
Yuma,
OMG a radio broke.No other Dxpeditions have ever had equipment
failures?
On 10/27/2017 12:33 PM, Ron D'Eau Claire wrote:
I doubt if anyone expects the receiver to survive if you hook the output of
even a 10 watt transmitter directly to the receiver antenna connector. If
the layout of a mu
I built my own and chose the spiderwire fishing line. Works great. The
fishing line is hard as heck to see but super strong. Goes over 100ft
trees with no effort.
On 10/26/2017 10:55 PM, Benny Aumala wrote:
GA,
I have used CSV19 from:
http://www.antennalaunchers.com/antlaunching.html
B
I don't think you are going to have much luck with a $49.00 drone.
On 10/27/2017 6:35 AM, W4EDN wrote:
I just ordered one from Amazon for 47.00 will post after I get and try it.
Bill w4edn
Sent from my iPod
__
Elecraft mailing list
H
manual
SHIPPING COST TO DISCUSSED
BEST OFFER
Thanks
Mike Weir
VE3WDM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
The K3/100 switches to the KPA3A at 12 watts. So is there a 2w range
(10-12w) where the KLPA3A is putting out unacceptable IMD? Is there a way to
make the switch at 10w, or should we just avoid that 2w "danger zone"?
73
Mike KD8RQE
In a message dated 10/24/2017 10:56:38 A.
VFO A and B 73CNC deluxe knobs
K-Pod excellent shape
P3 excellent shape
P3SVGA
Thanks very much for your input.
Mike
VE3WDM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
ost annoying thing about the whole job were the TMP coax connectors.
Regards,
Mike VP8NO
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.q
would cause the CPU to constantly
update the PLL reference oscillator DAC.
CAL PLL worked great, the BFO adjustments are done and the radio is working
great now.
Thanks for your help Don!
Mike M.
KU4QO
On Mon, Oct 16, 2017 at 8:11 AM, Don Wilhelm wrote:
> Mike,
>
> Record your current f
r? It sure feels like I'm doing something wrong, but I
can't figure it out.
I did a factory reset (hold 4,5,6 and power on), but I'm still seeing the
same issue with the PLL.
Any help will be greatly appreciated.
Thanks and 73
Mike M.
KU4QO
ed regular mail on a Sunday. Just more
of that Elecraft Mojo.
And, of course, my tiny little order was treated with the same urgency and
respect as when I bought the radio new. What a great company.
Now, off to finish the alignment!
Thanks again and 73
Mike M.
KU4QO
On Sat, Sep 30, 2017 at
of course, an Altoids tin. Maybe a mini project along these lines would
work, tailored to suit his interests and age.
Good luck!
Mike ab3ap
On 10/15/2017 11:46 AM, Dauer, Edward wrote:
Looking for suggestion about books or kits or whatever else that might interest
a ten year old to electron
let me ask
anyone with a P3SVGA or if you know someone with one for sale, please let me
know. Thanks, Mike, K5MP
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfa
Sad news. Glad to hear all the NCCC members are safe.
I fought wildfires but nothing like those. We had one in Montana in
2006 but I became a FF after that fire. The 2006 fire burned over 100k
acres and took about 30 homes and buildings. Montana does not have the
housing density that CA d
Seems to be offline does anyone know the admins?
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://ww
performs
normally on CW and SSB on these bands. I use the same TX Data mode on all
bands. Thought maybe there might be a hidden menu item that I might have
screwed up.
Anyway thanks for any help.
Mike, W0RSR
__
Elecraft mailing list
H
ke an order for a pair of BFO crystals should get me back in business, or
at least let me continue the alignment. Hopefully this was the only problem.
Thanks again Don for your expert advice. I'll follow up when I get the
replacement parts.
Best regards and 73
Mike M.
KU4QO
On Sat, Sep 30, 20
e two crystals was bad (or not soldered properly) would you
also see a reduction in BFO range?
What about if one of the varactors had failed?
Any further advice will be greatly appreciated.
Thanks and 73
Mike M.
KU4QO
On Sat, Sep 30, 2017 at 9:57 AM, Don Wilhelm wrote:
> Mike,
>
> The
checked the VBFO control voltage and
had 7.81 V at the high BFO frequency down to 0.00 V at the low BFO
frequency.
Any advice on how to move forward?
Thanks and 73,
Mike M.
KU4QO
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/lis
ilter). (If no KXFL1 is installed, FL1 is always used.)"
Indeed, when I set it to 2.9kHz the FL2 switches exactly at that point. But
when I set it to 2.4kHz, the FL2 switches at 1.7kHz. I made a video clip
showing that: https://youtu.be/bh3xZxrxhko.
Is there any explanation?
Thanks,
aypal to mgcizek at
gmail dot com or USPS money order. Thank you.
N.B. - this is NOT the new KXV-3B with the second preamp.
--
73,
Mike Cizek WØVTT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Does anyone know of a good powerpoint presentation on FT8?
Any help is appreciated.
W0MU
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailm
been involved with the deployment of
numerous solid state high power transmitters and have toured several
manufacturers development labs but never have I been able to put one together
and I REALLY want that opportunity, even if it's solder free and doesn't save a
lot of money.
Tnx,
ought SP3s and have opinions to
share? Room size, previous non-SP3 speaker quality, hearing, and so on
make comparing advice difficult, but I can't resist asking.
Tnx es 73,
Mike ab3ap
__
Elecraft mailing list
Home: http://
How about using the mouse scroll wheel, it adjusts the power in 0.1dB
steps. At least it does on my Win7 box.
The waterfall sliders also respond to the scroll wheel.
Regards,
Mike VP8NO
On 08/09/2017 21:52, Bob McGraw K4TAX wrote:
As an operational note for WSJT-X. Version 1.8.0 -rc2
To
for your assistance!
- 73 and good DX de Mike, <http://www.qrz.com/db/k6mkf/> K6MKF, Past
President - <http://ncdxc.org/index.html> NCDXC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecra
10M was open to VK-ZL-SoPac about 0240Z and shut down an hour later.
-- Mike Flowers, K6MKF, NCDXC - "It's about DX!"
> On Sep 7, 2017, at 8:48 PM, Jim Miller wrote:
>
> Take a look at the SFI at 127. It has been going up a bit and bounced to
> 103 a couple of da
"a pack of Lucky's" huh? You must be from my generation or maybe even a
little before. ;-()
Haven't heard that name in a LONG time Thanks for the info.
73 de
Mike / W8DN
On 9/5/2017 2:31 PM, Charlie T, K3ICH wrote:
I've bought some little Chicom plug-in Line
So what are people using to monitor their 120/240 mains? Just curious
but wondering if this is something I should be doing.
Mike / W8DN
On 9/4/2017 1:32 PM, Mel Farrer via Elecraft wrote:
Funny you posted this.
I monitor BOTH sides of the 110/220 VAC service and have alarms set to trigger
fail. For
those on a very rural line it could be an overheadline regulator gone to max
steps boost (HV) or buck for low voltage. Usually these are single phase large
auto-transformers with a plus or minus 10% in 16 steps each side of neutral
position. 73
Mike AC5P
On Monday, Septem
**sale pending**
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support th
Offered here is KX3 SN 5374, factory built with options as follows:
KXFL3 filter, KXAT3 tuner, KXBC3 battery charger clock, MH3 hand
mic,KXUSB, ACC 2 cable pack, DC power cords, BNC right angle adapter,
Begali Adventure mono with mag base and KX3 bracket, Pro Eng DC PS and
Think Tank strobe cas
It's probably this:
https://www.amazon.com/Baile-Transmitter-Multi-Point-H-366T-Simultaneously/d
p/B00X7L7HYG
- 73 and good DX de Mike, K6MKF, Past President - NCDXC
> -Original Message-
> From: elecraft-boun...@mailman.qth.net [mailto:elecraft-
> boun...@mailman.qth.net
SSB over its radio
circuits before World War I. SSB first entered commercial service on January
7, 1927 on the longwave transatlantic public radiotelephone circuit between New
York and London."
Mike / KK5F
__
Elecraft mailing li
Technically speaking, only its
suitability for use in unfavorable environmental conditions gives it any
advantage over a KX3.
Mike / KK5F
-Original Message-
>From: Stephen Peterson
>Sent: Aug 31, 2017 8:33 PM
>
>Imagine what the WWII resistance/spies would have given for a
thoughts there, I am still trying to
figure out what I really hope to get out of ham radio. So far it is QSOs on
this Elecraft mailing list :) which is a great group here... This band is
always open as long as the internet works. :) 73s, mike.
On Aug 13, 2017 7:18 PM, "Bob McGraw K4TAX"
many rigs (except the K2) have had a production and sales run of 17 years.
It will be missed, but I don't know how it was kept in production that long. I
suspect it had a unit cost to Elecraft not significantly less than the KX2.
Mike / KK5F
K1 serial 175
-Original Message-
>Fro
10.3. Awesome!
73,Mike AC5P
On Wednesday, August 30, 2017 7:28 AM, Don Wilhelm
wrote:
Tom,
That 3000 watts I mentioned is for everything in the station.
The KPA500 alone needs 120 volts at about 13 amps, maybe peaking to
something greater.
73,
Don W3FPR
On 8/30/2017 8:16 AM, KQ5S
. Go for it.
73, Mike WA5POK
On Wednesday, August 30, 2017 10:21 AM, Joseph M. Durnal
wrote:
Elecraft Operators,
I have been off the HF airwaves for several years. Those darned antenna
restrictions really take the fun out of it. But after helping staff the
K2BSA operation at the Boy
Hi guys,
I have a KX3 with roofing filters installed. I also have an IC-7300. Will KX3
have an advantage on receive in noisy environment and what is the best way to
use them (SSB and CW)?
Thanks!MikeAB3VN
__
Elecraft mailing list
Home: h
ed. I must have read this solution somewhere before as this is
the first time I had the problem. Oh well live and learn Tnx to
everyone who offered input as to a possible solution.
*73 De Mike*
*VE3YF
_/http://www.ve3y
Boy oh boy, another goof by me, this whole occurrence happens on
receive. Tnx for all the support.
*73 De Mike*
*VE3YF
_/http://www.ve3yf.com/_*
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
I should have mentioned that I already have even swapped out the RS-232
straight cable and Y-Cable, ACC Y-Cable from my other K3 Station and no
change in the results.
*73 De Mike*
*VE3YF
_/http://www.ve3yf.com/_*
__
Elecraft
latest firmware.
Both cables have been in place for over a couple years, and all of a
sudden this strange occurrence has shown up. Any one have any idea's. Tnx.
--
*73 De Mike*
*VE3YF
_/http://www.ve3yf.com/_*
__
Elecraft ma
Bob K4TAX,
Why 10 to 15 dB above - is your idea to have some margin for band noise
floor changes? It seems you'd maximize dynamic range by making the two
equal.
Tnx es 73,
Mike ab3ap
On 08/26/2017 03:36 PM, Al Lorona wrote:
Once again, a beautiful post by Bob. [...]
R, Al
801 - 900 of 6467 matches
Mail list logo
