[Elecraft] KH1 display while transmitting

Four month wait for KH1, but it looks nice. Six hours at 14 v to charge batteries. During transmitting, Power and SWR are displayed with values blanked. How does one unblank so as to see values? Thanks __ Elecraft mailing list Home: h

[Elecraft] Please unsubscribe

No discussions take place about Elecraft rigs that I own like KX3 KH1 or friend's KX2. Sure seems that the big rigs have a lot of problems - so it has been educational. 73N8TT __ Elecraft mailing list Home: http://mailman.qth.net/m

[Elecraft] info needed

I am going to need to change my email ad.. would some one please teel me how to do this Sincerely Harold n5tog k2 1587 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change

[Elecraft] Dummy Load

What is the recommended solution to the requirement of a 5w dummy load during assembly of the K3? 73 James / K1SD / Rhode Island -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Art Nienhouse Sent: Friday, July 20

Re: [Elecraft] [K3] GFI outlet, 100W on 20m, and *poof* (RFI?)

at the service entry point is a single rod with stranded ~8 ga into the house. The house ground and shack/antenna grounds are not directly connected except through grounded outlets, etc. At what point / where should the two be more robustly joined? 73 James / K1SD / Rhode Island -

Re: [Elecraft] Elecraft covers

Do they have a web site or something else that provides details of what Rose makes? 73 James / K1SD / Rhode Island -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ethan Miller K8GU Sent: Tuesday, August 21, 2012 6

[Elecraft] K3 Echo in TX Audio

clues as to what I may be overdriving, have set wrong, not adjusted properly, plugged into wrong place, etc, to produce "echoes"? 73 James / K1SD / Rhode Island __ Elecraft mailing list Home: http://mailman.qth.net/

Re: [BULK] - [Elecraft] Poor soldering (was: Does build quality affect performance?)

ils except for maybe one or two that I keep in a toolbox. Lastly, there are a number of places you can find some good kester solder out there. I've still barely made a dent in the roll that I have. Just some food for thought.. 73, James KB2FCV www.kb2fcv.com - Original Message

[Elecraft] coil info

Can some one tell me the person who is winding the coils for the k2 have a friend who wants some coils wound Sincerely Harold n5tog ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info

[Elecraft] K2 Speaker Replacement

or is there some speaker that is a 'must have' to replace the internal one? Thanks, James KB2FCV ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, uns

Re: RE: [Elecraft] Semi-Hypothetical Question

gt; Ron AC7AC > > -Original Message- > From: James Kern [mailto:[EMAIL PROTECTED] > Sent: Friday, August 12, 2005 9:28 AM > To: 'Ron D'Eau Claire' > Subject: RE: [Elecraft] Semi-Hypothetical Question > > > Ron, > The K2 is definitely hearing

[Elecraft] KIO2 install and volt meter problem

I was just putting the finishing touches on installing the KIO2 in my K2 when I encountered a problem during testing. I was at the part of testing the change in current when pulling the KIO2 off and on. When I pulled the KIO2 off and powered the radio back on, I got a 'Low Batt' message and the

Re: [Elecraft] KIO2 install and volt meter problem

good. - Original Message - From: Tom Hammond <[EMAIL PROTECTED]> Date: Sunday, August 14, 2005 10:23 am Subject: Re: [Elecraft] KIO2 install and volt meter problem > James: > > Check the mini-slide switch on the CONTROL BOARD. Be sure it's set > to 12V > and

[Elecraft] KIO2 not working

gest discrepancies I noticed was Pin 2. According to the manual, it's supposed to be -8 volts, but I get 0. Any suggestions as to where to start looking would be greatly appreciated as I am running out of ideas. Thanks! James Kern KB2FCV ___ Elec

Re: [Elecraft] KIO2 not working

will solve the problem as everything else voltage-wise checks out as it should. Thanks to all and I will update when I get the replacement part installed. 73, James KB2FCV - Original Message - From: Jack Brindle <[EMAIL PROTECTED]> Date: Wednesday, August 17, 2005 12:38 pm

Re: RE: [Elecraft] KIO2 not working

that makes any difference. Do I have to change anything on the computer for that? I see this choice was optional.. Thanks, James KB2FCV - Original Message - From: James Kern <[EMAIL PROTECTED]> Date: Thursday, August 25, 2005 3:42 pm Subject: RE: [Elecraft] KIO2 not working

[Elecraft] BL1 Stupid Question

I have a dumb question. I have a BL1. It has three connectors in which to make a connection. If I want to use 300 ohm or 450 ohm feedline, which connectors am I supposed to use? The connectors are marked 1, GND and 2. Would I use the same connectors for a dipole versus a loop? Thanks, James

[Elecraft] Elecraft amp

Have been thinking of new amp,does any one know will it have its own power supply and about what price range.? Sincerely Harold n5tog k2 1587 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subsc

[Elecraft] Off topic astron rs 20 schematic

Would some one have a schematic for a astron rs 20 power supply they could email me or know were i can find it . sincerely harold n5tog k2 1587 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. S

[Elecraft] ASTRON RS 20

Thanks to all who have help me now i just need tto fix sincerely harold n5tog k2 1587 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://ma

[Elecraft] K2 1587 ??

Hello, Does any one know how or wear to get a sehematic diagram for a signal splitter ( like the 870 ) has) so as i can use another receiver with my k2 for dual receive and a safe way to mute the other receiver on tx sincerely Harold k2 1587 n5tog _

[Elecraft] CW ???

Hello i want to get my cw speed back up,can some one tell me of a good puter program to help with this and do i want http or ftp have been looking and not sure of the better one ,i am running windows xp sincerely harold n5tog k2 1587 ___ Elecraft maili

[Elecraft] new k2

i would like to see a new front panel and case so as to use 2 k2 main boards u would have dual receive and no tell what else I would order a new k2 and the mod front panel tomorrow if that was to come about. harold n5tog k2 1587 ___ Elecraft mailing

[Elecraft] Design flaw in K3s

It isn't a matter of if your K3s will fail, it is a question of when.   The radio's current sense resistor (SMD 1206) is rated at 1/2 watt,  while (depending on options) will dissipate nearly 2 watts at 10 watt transmit.  It took several years but my resistor drifted from 0.05 ohms up to 0.068

Re: [Elecraft] Elecraft CW Net Announcement

Every Sunday, I look forward to your description of conditions there in your neighborhood as a part of your invitation to participate in the CW nets. You have a thoughtful eye for the conditions and an accomplished talent for expressing what you see. Thank you for your energy and support of the

Re: [Elecraft] K3- Part fell out!

If the radio still works, and if you find what part it is, Elecraft can cost reduce the design.. :-> --Jim K9JM On 1/23/2023 1:40 PM, Fred Jensen wrote: Does the radio still work?  If I find loose parts but the radio still works, I consider them to be spare parts. 😉  Seriously, does it appear

Re: [Elecraft] Tripod for ATX1 Tripod Adapter

Bill, I had a similar problem but solved it by carving out part of the side of the tripod platform to accommodate the bnc connector extending downward. The tripod still holds a camera if necessary. Jim W7OWI From: elecraft-boun...@mailman.qth.net on behalf of

[Elecraft] KX3 sold

I've sold my KX3. Jim W7OWI __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help

[Elecraft] K3S dead.

My K3S (Serial No. 11048) is completely dead and pressing the power button has no effect. FS1 and FS2 checked out OK. Removed KP3A to eliminate that as a possible cause. Measured 13V on pins 1,2 & 3 of Q2 but nothing on pins 5 to 8. Appreciate any guidance on this fault. ___

[Elecraft] New to the list

Hello all on the list, I am a proud owner of a K1 and told this is a great group to learn from. K7QI and Z81A *Signal Magazine --* *Editor* Collins Collectors Association CCA #AC02-11293 QCWA #30667 Life member ARRL --Technical Specialist Hattiesburg, MS (601) 307-3989 ___

[Elecraft] For Sale KPA1500 asking $6, 700 plus shipping. New in 2023. Excellent condition. Original owner. Original shipping boxes. Selling due to QTH relocation. Contact off list for questions, phot

For Sale KPA1500 asking $6,700 plus shipping. New in 2023. Excellent condition. Original owner. Original shipping boxes. Selling due to QTH relocation. Contact off list for questions, photos, shipping, pickup/delivery, phone call, etc. Thank you. 73, Jim WI6X _

[Elecraft] For Sale K-POD $350 plus shipping. New in box. Selling due to QTH relocation. Contact off list for questions, photos, shipping, pickup/delivery, phone call, etc. Thank you. 73, Jim WI6X

For Sale K-POD $350 plus shipping. New in box. Selling due to QTH relocation. Contact off list for questions, photos, shipping, pickup/delivery, phone call, etc. Thank you. 73, Jim WI6X __ Elecraft mailing list Home: http://mailman.q

[Elecraft] K3/100 TX problem on 20m

Hi. I had this problem in the recent past. It turned out to be an issue with my multiband yagi. It only occurred on 20m. Hope this helps. Jim EI4HH. [https://s-install.avcdn.net/ipm/preview/icons/icon-envelope-tick-green-avg-v1.png]

Re: [Elecraft] 4k monitors for the shack, late 2019

-transmit.674842/ James W0CD James From: elecraft-boun...@mailman.qth.net on behalf of Clay Autery Sent: Thursday, November 7, 2019 7:34:08 PM To: Jim Miller Cc: Elecraft Reflector Subject: Re: [Elecraft] 4k monitors for the shack, late 2019 NEVER buying another

[Elecraft] WTB: P3SVGA

Looking for a P3SVGA card... anyone got an extra? Please contact me off-list. k...@icloud.com 73 JK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecr

Re: [Elecraft] Excel Test

I would say it differently. I would say PDF is where text goes to be read. I decline to download any text file that’s not PDF. Too risky. It's amazing to me how many people will send out a file in a proprietary format like Microsoft Word and expect all the recipients to be able to read it. Jim

Re: [Elecraft] Excel Test

point, you have to hope that the original developer of that now broker > app will have updated it to run on the new OS. > I had that situation with EchoMac... a compatible version of EchoLink. > 73 de RayK2ULRKX3 #211 > > > -Original Message- > From: Don Wilhelm >

[Elecraft] Lost K-2

This is a repeat of a message I sent out several months ago. I'm paying the price for having parted with my K-2. I'm trying to buy it back but I can't find it. If anybody can help, please consider this message and get in touch with me directly. Thanks in advance for any assistance.

[Elecraft] MFJ 1234

Hi. Just wondering if anyone has used the MFJ 1234 Server with a K3S? I'm thinking of purchasing one but I'd like to hear from anyone with experience of using it. Jim EI4HH __ Elecraft mailing list Home: http://mailman.qth.net/mailm

Re: [Elecraft] Wall st journal article about dxpeditions

It would have been fun to read the article but it's behind a paywall. 73, Jim Driskell W7OWI From: elecraft-boun...@mailman.qth.net on behalf of Tony Estep Sent: Thursday, May 6, 2021 20:55 To: Elecraft Subject: [Elecraft] Wall st journal article about dxpedi

[Elecraft] K3S Fault

Just in the last few days my K3S (Serial No. 11048) has developed a fault whereby there is little or no power out on the 12m and 10m bands even into a dummy load. All other bands are fine. Any help would be appreciated. __ Elecraft maili

[Elecraft] Can the K3 make power without activating Key Out?

I think the answer is no, but I'll ask this question anyway. The station configuration is K3 followed by amp followed by automatic antenna coupler, where the Key Out line of the K3 is used to switch the amp inline. I would like to generate RF from the K3 without switching the amp inline

Re: [Elecraft] Can the K3 make power without activating Key Out?

- From: Dick Dievendorff Sent: Sunday, May 30, 2021 12:08 PM To: James Beitchman Cc: Elecraft@mailman.qth.net Subject: Re: [Elecraft] Can the K3 make power without activating Key Out? Buzz: Our KAT500 and KPA1500 antenna tuners interrupt the key line with a relay for ATU tuning (which is done

[Elecraft] Fw: 99.9 % alcohol

From: James Driskell Sent: Wednesday, July 14, 2021 17:11 To: John Simmons Subject: Re: [Elecraft] 99.9 % alcohol Not quite. Denatured alcohol is ethyl alcohol that contains methyl alcohol or isopropyl alcohol which make the mixture unfit for drinking

Re: [Elecraft] Elecraft CW Net Report

Hi Kevin, I'm not much of a CW guy so you haven't heard me on your net. But I really enjoy your net announcements and recaps. It's obvious that you are in touch with nature. Your descriptions provide me with a clear view in my mind's eye of goings on in your surroundings. I look forward to

Re: [Elecraft] Parts availability

Unfortunately, the "Just In Time" concept that many US manufacturers have built their businesses around never considered the "you're never going to get it" approach that we now see. I hope someone is taking a hard look at our national resource network because if the balloon goes up, we're going

Re: [Elecraft] Parts availability

still took time (at the cost of lives) to get production cranked up to meet the demand. "Those who do not study history are doomed to repeat it!" James M Driskell W7OWI From: elecraft-boun...@mailman.qth.net on behalf of David Gilbert Sent: Monday,

[Elecraft] Rf Choke placement

Hi all, Building a K2 kit. Does it matter which way to install the RF chokes? I am speaking of the color coded ones that resemble resistors. Thank you James, KJ4KEM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo

Re: [Elecraft] PLL Range test

To follow up on my question about the PLL range test, how critical is it to be at or below 15Khz? Currently I am at 15.40Khz after playing around with the winding spread. The errata sheet says to be between 9.98Khz and 15Khz difference in the high and low reading. 73 James, KJ4KEM > On 11

[Elecraft] K2 new kit question

an issue? And how would I be able to tell if it is a issue? Thank you for all the help I have received so far from this group. 73 James, KJ4KEM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http

[Elecraft] KX2s

new toy to the mountains when it arrives :) Thanks 73 James KI0KN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list h

Re: [Elecraft] KX2s

rvers/storage now so I think the delays are something we must all get used to until things recover. Thanks for the comments. I really didn't want to bug anyone at the factory with a "me too" question :) 73 James KI0KN On Thu, Feb 17, 2022 at 8:54 AM Tim N9PUZ wrote: > I believe t

Re: [Elecraft] KX2s

if you are participating! 73 James KI0KN On Thu, Feb 17, 2022 at 6:22 PM Mike Smith VE9AA wrote: > I got my shack-in-a-box KX2 last month (I did wait 8 or 9 weeks or > something.) No complaints..I knew there'd be a wait, but it shipped without > the microphone. (unbeknownst to

[Elecraft] question on KXPD2

designed or if I need to call Elecraft and ask about it! Thanks. 73 James KI0KN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.

[Elecraft] Stamps

My dad W8ZEQ was also a stamp collector. When the band was open in ‘57 he worked I1FT/Egone a few times. He introduced him to his neighbor Alvase another stamp collector. For over a decade envelopes of US and Italian stamps crossed the oceans, stamps on the inside and outside faithfully mounted

Re: [Elecraft] K4? Or K2S?

My personal thoughts on this one item are in-line and marked with * at the beginning of the line. And thank you to the reflector for allowing the 'wish list' to grow as it is. James Good KD5VXH On 3/25/19 7:10 AM, Steve Kavanagh via Elecraft wrote: If Elecraft had a rig that was

[Elecraft] P3 Ref Lvl Problems

When I set the noise level with Ref Lvl to the bottom of the spectrum display, It will over time continue to move downward until the noise level is off the spectrum display. If I cycle the P3, the noise level is well above the bottom of the display and the waterfall shows the noise which comes wit

Re: [Elecraft] MFJ, Elecraft, Cultures

FYI Martin F. Jue is a graduate of Mississippi State University there in Starkville, MS. He is a ham and a great supporter of ham radio here in the SE. Most vendors want big turnouts for hamfests and do not consider the smaller ones for participation. MFJ has always supported our local hamfest

[Elecraft] K3 For Sale

Elecraft K3/100 $2495. S/N 01480. 2008 Kit, 2009 upgrades, 2010 factory inspection and firmware upgrade. K3/100; KAT3 ATU Modulator kit; 2 KFL3A-500 Hz, 5 Pole filters (main/sub); MH2-R Hand Mic; 2 KBPF3A-F General Coverage RX Modules (main/sub); KDVR3 Digital Voice Recorder; KFL3A-6K-IR 6k

Re: [Elecraft] RCA Connectors i.e Phono Plugs

__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: ht

[Elecraft] For Sale: K-Line

Want to sell K3S-F (100w Upgrade KPA3A-F, KANT3 E0248-F, TCXO KTCX03-1-F,KFL3A-2.8_2.7SWAP-F, KBPF3A-F General Coverage Rx, KFL3A-1.0K-IR-F, KFL3C-200-F, KFL3A-400-IR-F, KFL3B-FM-IR-F, K3 2nd RX KRX3A-F, KFL3A-2.8_2.7SWAP-F, KFL3A-1.0K-IR-F, KFL3C-200-F, KFL3A-400-IR-F, K3FLTATCH 5-pole filter matc

[Elecraft] K-Line For Sale Rescinded

Problem with the P3 resolved with the help of Eric. When an owner of the company calls to assist, that is beyond the pale. I don't recall anyone ever having a corporate officer from Kenwood, Yaesu, or Icom call to assist in a problem resolution. So, I am withdrawing my for sale offer for my K-Li

Re: [Elecraft] Of words and such

Andy, Wayne was right, I meant that Eric had gone way beyond what was expected, in a good way. My understanding of the phrase was it meant beyond bad things and into the good. Sorry if you saw it otherwise. Guess I better watch out for the wordsmiths. 73, Jim K4ZMV On Fri, Apr 26, 2019 at 1:3

[Elecraft] FS: K3s w/ P3

Elecraft K3s – 100 (not an upgraded K3) KTCXD3-1F 1 PPM TCXO 8 pole 2.8 KHz Filter 2nd Receiver 5 pole 2.7 KHz Filter P3 panadapter w/ CBLP3Y cable (to K3s) All manuals, Famous Astatic D104 PTT lollipop mic with Heil dyanamic conversion. All

[Elecraft] NFS: K3s and P3

Disregard my recent ad for my K3s and P3 I predict the market to take a down turn due to the K4 effect. (If I wasn’t so old, I might be on the pre-order list myself.) 73s Jim, W4ATK K-Line K2/10 Sent from Mail for Windows 10 __ Elecraf

[Elecraft] K4HD

Now that is a unique approach and sure covers all the bases. All the cries for a direct sampling radio with a touch screen have now been answered. But if you want a radio for contesting, dxpeditions, field day and the like you are encouraged to look at the K4HD which will have a dual superhet ra

Re: [Elecraft] New K1 Kit

SMD soldering is actually pretty easy. It does take a good quality soldering station to do it though. Yes, I need magnification when soldering surface mount components. :) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/l

[Elecraft] [K2] Very Low SSB on 20 Meters

Hi all: I didn't build my K2, I bought it second hand in excellent condition a few years ago and really love it. My K2 came with all the trimmings, Jessie (KB7PSG) and I added a 6 meter transverter plus the 60 meter transverter and until recently everything worked fine. During Field Day this ye

Re: [Elecraft] [K2] Very Low SSB on 20 Meters

Those are excellent suggestions, especially about trying USB on another band. That hadn't even occurred to me. Thank you, I'll try your suggestions. On Thu, 25 Jul 2019, Don Wilhelm wrote: James, There is no band dependency on the KSB2 option board, if it works on one band, it wi

Re: [Elecraft] [K2] Very Low SSB on 20 Meters

It appears that USB is bad across the bands. I tried USB on 6, 10, 15, and 20 meters. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.

Re: [Elecraft] [K2] Very Low SSB on 20 Meters

It's a K2 with a 6 meter transverter. I'll try your suggestion after work. Thanks. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth

Re: [Elecraft] [K2] Very Low SSB on 20 Meters

Oh, okay. I honestly don't know what to look for though. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by:

Re: [Elecraft] [K2] Very Low SSB on 20 Meters

Thanks, I'll do that. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help suppo

[Elecraft] FS: Elecraft K-line

Station Closing Included are: K3s 100 W transceiver purchased 2015 .5 ppm TCXO 2.8 kHz filter KANT3 KRX3A purchased Jan 2018 USB cable to your computer P3 Panadaptor purchased 2014 CBLP3Y cable to K3s KPA500 Linear Amp purchased 2014 240VAC pow

[Elecraft] For Sale: Elecraft K-Line

Station Closing. Clean up before “the home” Included are: K3s 100 W transceiver purchased 2015    .5 ppm TCXO     2.8 kHz filter     KANT3     KRX3A purchased Jan 2018     USB cable to your computer P3 Panadaptor  purchased 2014    CBLP3Y cable to K3s KPA500 Linear Amp purch

[Elecraft] For Sale: K3s 100 W w/second receiver

Basic K3s (purchased new 2015) including KP3A 100 Watt upgrade KANT3 Antenna connection board (NOT an autotuner) K3 TCXO .5ppm factory installed 2.8 kHz 8 pole filter upgrade KRX3A Second Receiver w/ 2.7kHz filter (purchased n ew2018) USB Cable to computer DC cable to power strip (powerpole connect

Re: [Elecraft] K3s and second receiver

The item has sold. Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://

Re: [Elecraft] Aug 2 post of K-line For Sale

All items of that post have been spoken for or sold 73s Jim Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailma

[Elecraft] FS: K3s w/ KRX3A sub receiver.

This is a basic K3s purchased purchased 2015. Includes: KPA3A 100W upgrade KANT3 The sub receiver was added in 2018. Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: h

[Elecraft] Rhombic antenna farms

Got introduced to HF radio on Okinawain the early 70s with multiple bays of Rhombic antennas & R-390A receivers... Talk setting the bar high..! 73 - Jim AC0E __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinf

Re: [Elecraft] K3 Filters for sale

Filters are spoken for… 73 Jim K8JK > On Oct 14, 2019, at 5:17 PM, Roberta Estes via Elecraft > wrote: > > Elecraft K3 filters surplus to my needs > > KFL3A-2.8K (Elecraft Branded Inrad filter) $80 shipped USPS > > KFL3A-6K (Elecraft Branded Inrad Filter) $80 shipped USPS > > KFL3B-FM (El

[Elecraft] Pigtail & Cable for sale

Pigtail from http://pignology.net and RS232 to electrify KX3 control cable. Manual available at Pignology.net $100 including shipping. PayPal requires an additional $5.00 unless you simply send money. contact off net if required at my email

[Elecraft] 6 meter blocking gain in K3 QST review

, it is somewhat disappointing that the receiver performance of the K3 on 6M is not on a par with its performance on HF. - Duffey -- KK6MC James Duffey Cedar Crest NM ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a

[Elecraft] Beginner K3 questions:interface & mikes

Greeting's K3 users, Katiegram says my K3 arrriving soon. What cable interface/setup do I use for HamRadio Deluxe? Where do I get one. I am interested in mike opinions(DXing and ragchew). I hear the Astatic D10 can be set up to work well? Anyone have setup settings for this mike?

[Elecraft] ELECRAFT KEY FOR SALE SAVE $ 100.00!!!

Due to problems with a partial hand amputation, I must sell my keys. I am now forced to use a keyboard. I have Elecraft Hex Key # E 0355 for sale. I am including a first class, heavy duty cord and plug. NONE is supplied when sold new. Condition is excellent with original box. Price is $ 1

[Elecraft] ELECRAFT KEY SOLD

elecraft key has been sold. Thanks to all to responed! Scotty/3 "WK3N NEVER SLEEPS !" Quote from Martti Lane, OH2BH. _ Windows Live™: E-mail. Chat. Share. Get more ways to connect. http://windowslive.com/explore?ocid=TXT_TAGLM_WL_

[Elecraft] New K3 purchase

am assuming however that this module can in fact be installed on both receivers? Thanks to all ahead of time for answering my questions. I hope to have my K3 soon. 73, James KC2UEE __ Elecraft mailing list Home: http://ma

[Elecraft] K3 sub-receiver usefulness?

to install the AM or FM filters in the sub to monitor SW or FM or can the sub's DSP take care of it? 73, James KC2UEE __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman

Re: [Elecraft] K3 sub-receiver usefulness?

, so I'm assuming higher fidelity? 73, James KC2UEE -Original Message- From: Joe Subich, W4TV [mailto:li...@subich.com] Sent: Tuesday, February 10, 2009 7:40 PM To: 'KC2UEE'; 'Rick Tavan N6XI' Cc: elecraft@mailman.qth.net Subject: RE: [Elecraft] K3 sub-receiver u

[Elecraft] K3 configuration finalization plus diversity receive antenna question

loop antenna will be connected to the AUX RF BNC input. The loop antenna will also be used for SWL'ing. I'm assuming that the gen coverage module will function with the sub receiver using the AUX RF BNC input? Does this sound like a well rounded pac

[Elecraft] Calibration of KXV3 module

Dear group, Page 50 of the user manual states that a 50 ohm resistor should be attached to the XVTR OUT jack for calibration. If I don't have a resistor, can I use a 50 ohm BNC stubby HT antenna instead since output is only 1 mW? 73, James K

Re: [Elecraft] Calibration of KXV3 module

Hi Stephen, Yes, I'm familiar with 50 ohm BNC network terminators. This will work without issue and get me properly calibrated? Otherwise, I can always get an SO239 to BNC adapter and run a cable into my 300w 50 ohm dummy load. 73, James KC2UEE _ From: Stephen

[Elecraft] WTB: 6KHz AM Filter

he main RF board, and will have a sub receiver on top of it. I'd hate to disassemble the sub receiver just to install a filter on the main board at a later date. 73, James KC2UEE __ Elecraft mailing list Home: http://mailman.

Re: [Elecraft] Calibration of KXV3 module

Hi Eric, Yes, I stand corrected. I will use a 50 ohm dummy load with an SO239 to BNC adapter when it comes time to calibrate. Also, someone suggested using a 50 ohm terminator plug as used in computer networks. That sounded like a pretty interesting idea. 73, James KC2UEE -Original

[Elecraft] Thank you Elecraft reflector group!!!

anks again! James KC2UEE __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help su

Re: [Elecraft] K3 configuration finalization plus diversity receive antenna question

FM filter allows the full 4.5 KHz where the AM filter starts to roll off at 3 KHz but still has some audio response down the filter skirts. I hope that someday Elecraft will "open up" the audio in AM so we can hear 5.5 or 6 KHz which as good as it gets these days. Hope tha

Re: [Elecraft] Elecraft 70cm transverter, K3 and repeater access tones?

m/440 base instead. 73, James KC2UEE -Original Message- From: David Giles [mailto:vk...@aapt.net.au] Sent: Friday, February 13, 2009 10:20 PM To: KC2UEE Subject: Re: [Elecraft] Elecraft 70cm transverter, K3 and repeater access tones? Hello James, Repeaters on 10m and 6m are well withi

[Elecraft] K3 external ALC to phono

Dear group, If I wanted to make an external ALC cable for use with a linear, do I just need to solder pin 15 to phono center, and pin 12 to the screen beneath the phono cable's sheath for common? 73, James KC2UEE __ Ele

[Elecraft] Just finished building my K3

hanks to you for the assembly tips and the filters. 73, James KC2UEE __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net T

[Elecraft] Speaker vibrations and other oddities

Just built my K3. first, the speaker vibrates even with the foam donut on the end of the shield. also, the sub receiver doesn't seem to have the same volume output as the main even if both RF and AF pots are set the same. Suggestions? 73, James K

  1   2   3   4   5   6   7   8   9   10   >