Re: [Elecraft] OT - 6m antenna

2016-07-14 Thread Bill Frantz
7/13/16 at 12:39 AM, kl...@acsalaska.net (Edward R Cole) wrote: Probably better if you can find some 1/2-inch aluminum tubing (my local metal dealer would have to order that so I used ordinary conduit). --- Bill F

Re: [Elecraft] [K3] internal 144MHz xvrtr - no output

2016-07-25 Thread Bill Frantz
D'Eau Claire) wrote: If it's dead in all modes, or especially if it is intermittent, check to be sure the antenna cable is properly inserted in the TMP connector at the K144XV module. --- Bill Frantz|The nice t

Re: [Elecraft] QSLs

2016-07-26 Thread Bill Frantz
I use the 6m card for any HF requests. --- Bill Frantz| Truth and love must prevail | Periwinkle (408)356-8506 | over lies and hate. | 16345 Englewood Ave www.pwpconsult.com |

[Elecraft] Cleaning a K3

2016-07-27 Thread Bill Frantz
My K3 (and P3) were used in a very dusty environment in eastern Nevada. Some people there compared the dust levels to those at burning man. Does anyone have any advice about cleaning the equipment? 73 Bill AE6JV --- Bill

Re: [Elecraft] KX3 2m external amplifier

2016-07-28 Thread Bill Frantz
have experience with one of these amplifiers? --- Bill Frantz| "The only thing we have to | Periwinkle (408)356-8506 | fear is fear itself." - FDR | 16345 Englewood Ave www.pwpconsult.com | Inaugural address

Re: [Elecraft] [ KX2] KXBT2 Charger

2016-07-29 Thread Bill Frantz
overnight, I suggest you put them in a non-flammable pan outdoors (away from buildings) and power the charger with an extension cord. That is for the safety of you and yours in case something bad happens. --- Bill Frantz| I

[Elecraft] KX3 Setting frequency memories via the programming interface

2016-07-29 Thread Bill Frantz
set the memory and the other recall the memory to the radio? Just how does this work? Thanks - Bill AE6JV --- Bill Frantz|Security, like correctness, is| Periwinkle (408)356-8506 |not an add-on feature. - Attr

Re: [Elecraft] K3S Data Connections

2016-07-31 Thread Bill Frantz
eed for an external sound card, and still have those programs do full rig control like the K3 that I have? If yes, what connections are made between the radio and the computer...? ----- Bill Frantz| When it comes to the

Re: [Elecraft] [KX3] Computer interface for KX2?

2016-08-01 Thread Bill Frantz
: Data modes require only mono - only the left channel is used. The SignaLink interface is mono. Of course, the KX2/KX3 requires a stereo plug. --- Bill Frantz|"Web security is like medicine - trying to do goo

[Elecraft] K3 and P3 cleaning - after action report

2016-08-01 Thread Bill Frantz
t of their performance. Thanks to everyone who responded for your advice. I'm glad that heroic measures were not necessary. 73 Bill AE6JV ------- Bill Frantz| Concurrency is hard. 12 out | Periwinkle (408)356

Re: [Elecraft] Trying wspr again with signalink and K3

2016-08-04 Thread Bill Frantz
...@fastmail.fm (dw) wrote: Is anyone using the Signalink USB with WSPR, and perhaps could share your PTT method and CAT setting and perhaps K3 settings? --- Bill Frantz|The nice thing about standards| Periwinkle (408)356-8506

Re: [Elecraft] k3s radio kit

2016-08-08 Thread Bill Frantz
component - pliers or tweezers are needed to extract a screw or other component from those containers. --- Bill Frantz| I like the farmers' market | Periwinkle (408)356-8506 | because I can get fruits and |

Re: [Elecraft] Using K3 w/AS original Bandmaster band decoder

2016-08-10 Thread Bill Frantz
a K2 with the Kenwood setting but no details. --- Bill Frantz|The nice thing about standards| Periwinkle (408)356-8506 |is there are so many to choose| 16345 Englewood Ave www.pwpconsult.com |from. - Andrew Tane

Re: [Elecraft] K3 and inverter generators

2016-08-10 Thread Bill Frantz
I've seen at Harbor Freight is off-shore made junk, and the driving force is CHEAP. I would expect any they sell with electronics to be a noisy pig. ------- Bill Frantz|"After all, if the conventional wisdom w

elecraft@mailman.qth.net

2016-08-15 Thread Bill Frantz
20 meters with my vertical this morning. --- Bill Frantz| gets() remains as a monument | Periwinkle (408)356-8506 | to C's continuing support of | 16345 Englewood Ave www.pwpconsult.com | buffer overruns.

Re: [Elecraft] K-3 upgrade question

2016-08-22 Thread Bill Frantz
move items more than once if at all possible. --- Bill Frantz|The nice thing about standards| Periwinkle (408)356-8506 |is there are so many to choose| 16345 Englewood Ave www.pwpconsult.com |from. - Andrew Tanenbau

Re: [Elecraft] KXBC3 clock drift

2016-08-28 Thread Bill Frantz
1000MPs gone from my operating desk. :) --- Bill Frantz| I don't have high-speed | Periwinkle (408)356-8506 | internet. I have DSL.| 16345 Englewood Ave www.pwpconsult.com |

Re: [Elecraft] Subject: Re: KXBC3 clock drift

2016-08-28 Thread Bill Frantz
elicit the K3 Utility program to connect and update the K3 clock, automatically. No change to the K3 clock hardware would be needed. ---- Bill Frantz|"Insofar as the propositions of mathematics refer to 408-356-8506

Re: [Elecraft] [KX2] fast becoming my favorite radio

2016-08-28 Thread Bill Frantz
7;m not looking for an exhaustive feature comparison. ------- Bill Frantz| If you want total security, go to prison. There you're 408-356-8506 | fed, clothed, given medical care and so on. The only www.pw

Re: [Elecraft] [KX2][KX3][KXIQ2] Best Base Station: KX2 vs KX3

2016-08-29 Thread Bill Frantz
n was something that appeals to more customers, especially since it can also be used with the KX3. --- Bill Frantz| gets() remains as a monument | Periwinkle (408)356-8506 | to C's continuing support

Re: [Elecraft] KX2 battery in PX3

2016-09-01 Thread Bill Frantz
lifies portable setup, making portable PX3 more feasible. ------- Bill Frantz| Security is like Government | Periwinkle (408)356-8506 | services. The market doesn't | 16345 Englewood Ave www.pwpconsult.com | want

Re: [Elecraft] Mysterious intermittent failure possibly related to power supply?

2016-09-04 Thread Bill Frantz
Sometimes power supply problems become very obvious if you look at the power supply output with an oscilloscope. 73 Bill AE6JV --- Bill Frantz| If you want total security, go to prison. There you're 408-356

Re: [Elecraft] K3 - "Birdies" on P3 that tracks VFO A + KX3 PX3

2016-09-05 Thread Bill Frantz
When I find an unusual level of birdies on either panadapter, I first look for antenna problems. I learned this in the school of hard knocks. 73 Bill AE6JV --- Bill Frantz|"We used to quip that "passwo

Re: [Elecraft] Skimmer and the K3S

2016-09-05 Thread Bill Frantz
--- Bill Frantz| If you want total security, go to prison. There you're 408-356-8506 | fed, clothed, given medical care and so on. The only www.pwpconsult.com | thing lacking is freedom. - Dwight D. Eisen

Re: [Elecraft] Skimmer and the K3S

2016-09-05 Thread Bill Frantz
rest at Elecraft for sharing your designs. 73 Bill AE6JV --- Bill Frantz| Security is like Government | Periwinkle (408)356-8506 | services. The market doesn't | 16345 Englewood Ave www.pwp

Re: [Elecraft] [OT] Mobile/Portable gray zone

2016-09-07 Thread Bill Frantz
pier? --- Bill Frantz| If you want total security, go to prison. There you're 408-356-8506 | fed, clothed, given medical care and so on. The only www.pwpconsult.com | thing lacking is freedom. - Dwight D.

Re: [Elecraft] Portable Ops with KX3 along with KXPA100

2016-09-20 Thread Bill Frantz
FWIW, we had problems with noise from a Generac ix 800 (800 watts) generator when we were running a special event station. It just covered the P3 with noise. 73 Bill AE6JV --- Bill Frantz| Privacy is dead, get over

Re: [Elecraft] "Random wire" vs Buddystick - myth, bias or luck?

2016-09-28 Thread Bill Frantz
theoretical resistance that allows us to compute the radiated power. A higher number is better.] --- Bill Frantz| If the site is supported by | Periwinkle (408)356-8506 | ads, you are the product.| 16345 Englewood Ave

Re: [Elecraft] "Random wire" vs Buddystick - myth, bias or luck?

2016-09-29 Thread Bill Frantz
your callsign. http://www.reversebeacon.net/srch.php Compare your received signal strength on each antenna by the stations who heard you. Run the test a few times to minimize QSB and propagation fading. --- Bill Frantz

[Elecraft] Cold K3

2016-10-03 Thread Bill Frantz
major issue, but we are curious. Has anyone else experienced this effect? 73 Bill AE6JV --- Bill Frantz| Concurrency is hard. 12 out | Periwinkle (408)356-8506 | 10 programmers get it wrong. | 16345 Englewoo

Re: [Elecraft] Camping radio ops: then and now

2016-10-04 Thread Bill Frantz
Gatos, CA. I found a lovely site overlooking the valley with trees giving me about 15' elevation for the dipole. I had a fun afternoon making PSK contacts. 73 Bill AE6JV --- Bill Frantz|Security, like correctnes

Re: [Elecraft] Cold K3

2016-10-06 Thread Bill Frantz
posted about what I had been taught years ago concerning solid state circuit design. As of those designs, it is my understanding that solid state radios will have reduced performance in cold temps. --- Bill Frantz

Re: [Elecraft] KX3 Utility and RumlogNG

2016-10-09 Thread Bill Frantz
these programs to connect after upgrading OSX to Sierra? I can't seem to get them to connect, upgraded last week to sierra, and today was the first time I tried it.. Regards.. Fred --- Bill Frantz| Since the IBM

Re: [Elecraft] K-pod SSB macro

2016-10-10 Thread Bill Frantz
/16 at 5:32 PM, donw...@embarqmail.com (Don Wilhelm) wrote: The closest thing I can think of is to set up the M1-M4 memories for each band. I use M1 for CW mode, M2 for data mode, and M3 for SSB mode - M4 is unused in my case. ---

Re: [Elecraft] Is the K3 have low sensitivity on 10 M and 6 M

2016-10-12 Thread Bill Frantz
--- Bill Frantz| I don't have high-speed | Periwinkle (408)356-8506 | internet. I have DSL.| 16345 Englewood Ave www.pwpconsult.com | | Los Gatos, CA

Re: [Elecraft] K3S QST Article

2016-10-15 Thread Bill Frantz
supply capable of 15-20A continuous current, with a 10A 12V switcher built in for the rest of the radio. ------- Bill Frantz| Concurrency is hard. 12 out | Periwinkle (408)356-8506 | 10 programmers get it wron

Re: [Elecraft] Performance of the KX2 batt

2016-10-16 Thread Bill Frantz
can only run the KX2 at 5W. - Bill Frantz| Airline peanut bag: "Produced | Periwinkle (408)356-8506 | in a facility that processes | 16345 Englewood Ave www.pwpconsult.com | peanuts and other nuts.&q

Re: [Elecraft] K3S QST Article

2016-10-18 Thread Bill Frantz
) out in the sticks...ever...save Field Day? --- Bill Frantz| Can't fix stupid, but duct | Periwinkle (408)356-8506 | tape can muffle the sound... | 16345 Englewood Ave www.pwpconsult.com | - Bill Li

Re: [Elecraft] operating HF / KX3 in a Tesla Model S

2016-10-19 Thread Bill Frantz
the bonding. 73 Bill AE6JV --- Bill Frantz|"We used to quip that "password" is the most common 408-356-8506 | password. Now it's 'password1.' Who said users haven't www.pwpc

Re: [Elecraft] [K3] The Way We Rank Receivers (long)

2016-10-25 Thread Bill Frantz
MM, FD and DXpedition RX uses which in fact push the dynamic range and mixing limits today? There are MM stations which operate two transmitters on the same band. --- Bill Frantz| Re: Computer reliability, performance, an

Re: [Elecraft] [K3] The Way We Rank Receivers (long)

2016-10-25 Thread Bill Frantz
eiver... - Bill Frantz| When it comes to the world | Periwinkle (408)356-8506 | around us, is there any choice | 16345 Englewood Ave www.pwpconsult.com | but to explore? - Lisa Randall | Los Gatos, CA

Re: [Elecraft] [K3] The Way We Rank Receivers (long)

2016-10-26 Thread Bill Frantz
hear everybody. The filters were wide open, preamp on, and NR off. Zoom in and you can see for yourself. --- Bill Frantz|"After all, if the conventional wisdom was working, the 408-356-8506 | rate of sys

Re: [Elecraft] KX3 & RMS Express - T R latency

2016-10-29 Thread Bill Frantz
will work after I figure out the settings. Thanks! ------- Bill Frantz| gets() remains as a monument | Periwinkle (408)356-8506 | to C's continuing support of | 16345 Englewood Ave www.pwpconsult.c

Re: [Elecraft] [KX2] Digi Mode Newb looking for advice

2016-11-07 Thread Bill Frantz
er to the Blue Smoke Monster. --- Bill Frantz| Security is like Government | Periwinkle (408)356-8506 | services. The market doesn't | 16345 Englewood Ave www.pwpconsult.com | want to pay for them.

Re: [Elecraft] Elecraft SSB Net Results Nov 6, 2016

2016-11-15 Thread Bill Frantz
by the receivers. I would stick with communications grade bandwidth. 73 Bill AE6JV On 11/15/16 at 8:42 PM, elecraft@mailman.qth.net (Barthold Lichtenbelt via Elecraft) wrote: Is it OK to use ESSB on the net? --- Bill

Re: [Elecraft] Keyboards for P3/SVGA

2016-11-20 Thread Bill Frantz
anks in advance, Ted, KN1CBR ------ Bill Frantz| There are now so many exceptions to the 408-356-8506 | Fourth Amendment that it operates only by www.pwpconsult.com | accident. - William Hugh Murray __

Re: [Elecraft] Headset/Mic Suggestions

2016-12-05 Thread Bill Frantz
K3. --- Bill Frantz| If the site is supported by | Periwinkle (408)356-8506 | ads, you are the product.| 16345 Englewood Ave www.pwpconsult.com | | Los Gatos, CA 95032

[Elecraft] Mobile Radio Dreams

2016-12-13 Thread Bill Frantz
Bill AE6JV --- Bill Frantz| I like the farmers' market | Periwinkle (408)356-8506 | because I can get fruits and | 16345 Englewood Ave www.pwpconsult.com | vegetables without stickers. | Los Gatos, CA 95032 __ Elecra

Re: [Elecraft] Mobile Radio Dreams & the KX2

2016-12-14 Thread Bill Frantz
ntegrated solution. 73 Bill AE6JV ------- Bill Frantz| I like the farmers' market | Periwinkle (408)356-8506 | because I can get fruits and | 16345 Englewood Ave www.pwpconsult.com | vegetables

Re: [Elecraft] Sync AM and checking VFO accuracy using WWV

2016-12-18 Thread Bill Frantz
. --- Bill Frantz| Security is like Government | Periwinkle (408)356-8506 | services. The market doesn't | 16345 Englewood Ave www.pwpconsult.com | want to pay for them.| Los Gatos, CA

Re: [Elecraft] KX2 Memory Operation Question

2016-12-19 Thread Bill Frantz
missing something? Would appreciate any comments! ------- Bill Frantz| Since the IBM Selectric, keyboards have gotten 408-356-8506 | steadily worse. Now we have touchscreen keyboards. www.pwpconsult.com | Can we

Re: [Elecraft] Elecraft Customer Service

2016-12-27 Thread Bill Frantz
ceive that kind of email from UPS automatically no matter who initiates the shipment. I’ve also been surprised and mystified on occasion when I get that notice when I know I haven’t ordered anything lately. --- Bill Frantz

Re: [Elecraft] Small QRP antenna

2016-12-29 Thread Bill Frantz
ls do not have to be resonant, elevated radials must be resonant. The ground effects will alter the resonance of buried radials while radials in the air are a part of the total antenna resonance. --- Bill Frantz|Security,

Re: [Elecraft] Amplifiers in general

2016-12-31 Thread Bill Frantz
. I'm guessing that you can hear a radio transmission mathematically below the apparent noise level because it is "atypical" or "organized noise" as opposed to the "noise" in the S2 noise floor which is "disorganized". ----

Re: [Elecraft] Antenna for 2nd receiver

2017-01-02 Thread Bill Frantz
will be using a TH11DX as the main antenna --- Bill Frantz|"After all, if the conventional wisdom was working, the 408-356-8506 | rate of systems being compromised would be going down, www.pwpconsult.com

Re: [Elecraft] K3S Set-up for WSJT-X

2017-01-05 Thread Bill Frantz
x27;t know what is happening with John's system. I see a device: 'cu.usbserial-A503XYB1' which is probably my K3. 73 Bill AE6JV --- Bill Frantz|The nice thing about standards| Periwinkle (408)356-8506 |

Re: [Elecraft] Dimmable LED desk lamp for operating position recommendation needed

2017-01-06 Thread Bill Frantz
ed in the power lead. No RFI. Plenty bright. Mine came from Amazon but there are many to choose from these days; you can even select color temperature when you order. --- Bill Frantz| Truth and love must pr

[Elecraft] Volumn from K3S USB interface

2017-01-09 Thread Bill Frantz
40 seemed to work well. Am I the only one driving the USB this hard? 73 Bill AE6JV --- Bill Frantz| Security is like Government | Periwinkle (408)356-8506 | services. The market doesn't | 16345 Englewoo

Re: [Elecraft] Elecraft Support

2017-01-09 Thread Bill Frantz
n then the base hardware level. If you ENJOY building it yourself, don't let small parts intimidate you. --- Bill Frantz| Truth and love must prevail | Periwinkle (408)356-8506 | over lies and hate. |

Re: [Elecraft] KIO3B RTTY AFSK problem with Transmit

2017-01-10 Thread Bill Frantz
and not PTT) Do I need to enable PTT? I have tried switching MIKE to LINE IN to no avail. --- Bill Frantz| Security is like Government | Periwinkle (408)356-8506 | services. The market doesn't | 16345

Re: [Elecraft] K3s-wsjt-wspr

2017-01-15 Thread Bill Frantz
n.qth.net (Harry Yingst via Elecraft) wrote: I see New hardware in data centers lose more than a second a week without a external clock source to update them. ---- Bill Frantz|"Insofar as the propositions of math

Re: [Elecraft] k-pod data cable

2017-01-16 Thread Bill Frantz
ramming connector Here are the pin outs as I read them   1   Unused    - MCLR, Low to reset CPU   2   +5 vDC    - VCC5   3   Ground    - VSS   4   Data      - PGD   5   Clock     - PGC   6   +5 vDC    - VCC5 ------- Bill Frantz

Re: [Elecraft] k-pod data cable

2017-01-16 Thread Bill Frantz
way of writing a limited number of macros, that have to be sent to the K3 and stored, only to be executed by a K-Pod over a dubious interface, the macros should simply be saved in the K-Pod in the first place and sent via USB and/or RS232.

Re: [Elecraft] k-pod data cable

2017-01-16 Thread Bill Frantz
isn't one of Jim Brown's Pin 1 problems, is pin 1 isn't used :-) Wes N7WS On 1/16/2017 8:08 PM, Bill Frantz wrote: It is likely that the interface used by the K-Pod is the I2C bus <https://en.wikipedia.org/wiki/I%C2%B2C>, a very commonly used bus in the chip world. I

Re: [Elecraft] Source for K3 weighted knobs

2017-01-18 Thread Bill Frantz
AE6JV --- Bill Frantz| Can't fix stupid, but duct | Periwinkle (408)356-8506 | tape can muffle the sound... | 16345 Englewood Ave www.pwpconsult.com | - Bill Liebman | Los Gatos,

Re: [Elecraft] K3 - stuck at MCU LD we upgrading software

2017-01-28 Thread Bill Frantz
so) voltage sag, particularly if operating at QRP power levels. It indicates that there is a high resistance in the power supply or the associated wiring, connectors etc. 73 Bill AE6JV ----- Bill Frantz| When it comes to

Re: [Elecraft] Just bought a K3/10. What upgrades should I get?

2017-01-28 Thread Bill Frantz
vance. - Bill Frantz| Airline peanut bag: "Produced | Periwinkle (408)356-8506 | in a facility that processes | 16345 Englewood Ave www.pwpconsult.com | peanuts and other nuts." - Duh | Los G

Re: [Elecraft] The "Kinda Random Antenna"

2017-01-29 Thread Bill Frantz
light bulb) to test our rigs and had someone call us in return! --- Bill Frantz|The nice thing about standards| Periwinkle (408)356-8506 |is there are so many to choose| 16345 Englewood Ave www.pwpconsult.com |from.

Re: [Elecraft] Santa - Thanks!

2013-12-25 Thread Bill Frantz
Santa, KI6SLX delivered a 100W upgrade for my K3. QRO here we come! :-) Cheers - Bill, AE6JV --- Bill Frantz|"Web security is like medicine - trying to do good for 408-356-8506 |an evolved body of kl

Re: [Elecraft] Noise Cancelling Headphones

2013-12-25 Thread Bill Frantz
up. If they're noise cancelling, I cannot find that information about them. They aren't noise canceling, but my wife complains that I can't hear her when I'm wearing them HIHI. Cheers - Bill, AE6JV ------

Re: [Elecraft] Has this link been changed?

2013-12-28 Thread Bill Frantz
. Cheers - Bill, AE6JV On 12/28/13 at 12:38 PM, e...@elecraft.com (Eric Swartz WA6HHQ - Elecraft) wrote: Note that both the mail-archive and Nabble archives are run by independent outside parties and not by --- Bill Frantz

Re: [Elecraft] KX3 / K3 Antenna Sharing

2014-01-05 Thread Bill Frantz
/31/13 at 4:42 AM, k...@icloud.com (Reginald J Mackey SR) wrote: I 've use both MFJ and Alph-Delta switches and they work well. no problems even at 1k. --- Bill Frantz| "I wish there was a knob on the TV t

[Elecraft] Current use K3/10 vs. K3/100

2014-01-05 Thread Bill Frantz
ndard" temperature. The last time I think I used the wall thermometer.) The MacIntosh K3 Utility did the Wattmeter calibration. As far as I know, these were the only changes to the radio's settings. Cheers - Bill, AE6JV ----

Re: [Elecraft] Current use K3/10 vs. K3/100

2014-01-06 Thread Bill Frantz
, 3.49A@10.3V vs. 3.53A@10.6V but the difference isn't very significant and may be explained by the difference in voltage. (However, I would expect higher current with less voltage.) Cheers - Bill, AE6JV ------- Bil

Re: [Elecraft] JARD Technical Standard Certification Number for K3 orK3X

2014-01-07 Thread Bill Frantz
ccept such a moving spec. machine. - Bill Frantz| The first thing you need when | Periwinkle (408)356-8506 | using a perimeter defense is a | 16345 Englewood Ave www.pwpconsult.com | peri

Re: [Elecraft] JARD Technical Standard Certification Number for K3 orK3X

2014-01-07 Thread Bill Frantz
hru a bureaucratic hoop would certainly act as a disincentive. Cheers - Bill On 1/7/14 at 6:32 PM, wun...@wunderwood.org (Walter Underwood) wrote: Radios in the US need FCC approval, too. I don't think this is all that different. --wunder On Jan 7, 2014, at 6:28 PM, Bill Frantz wro

Re: [Elecraft] KXPA100 Mobile Operations

2014-01-13 Thread Bill Frantz
r Christmas. Cheers - Bill, AE6JV ------- Bill Frantz|The nice thing about standards| Periwinkle (408)356-8506 |is there are so many to choose| 16345 Englewood Ave www.pwpconsult.com |from. - Andrew

Re: [Elecraft] OT - LoTW Verifications

2014-01-17 Thread Bill Frantz
(Wes (N7WS)) wrote: Patience OM. Be happy you're not waiting on a paper QSL via the bureau.:-) --- Bill Frantz|"We used to quip that "password" is the most common 408-356-8506 | password.

[Elecraft] Amsterdam Island, was: KPA500 Clicks

2014-01-26 Thread Bill Frantz
BTW, I normally run the P3 covering a wide span when running PSK, because I can see the detail on the computer waterfall and sometimes find a PSK station way outside the normal range with the P3. Cheers - Bill --- Bill Frantz

[Elecraft] SPOT for SSB feature request

2014-02-02 Thread Bill Frantz
of 500 Hz it would quite useful. Cheers - Bill, AE6JV --- Bill Frantz| I like the farmers' market | Periwinkle (408)356-8506 | because I can get fruits and | 16345 Englewood Ave www.pwpconsult.com | veget

Re: [Elecraft] K3 Rx antenna

2014-02-02 Thread Bill Frantz
ools each has unique benefits & liabilities, sometimes a different choice lets me make the Q. --- Bill Frantz|Security, like correctness, is| Periwinkle (408)356-8506 |not an add-on feature. - Attr-| 16345 Engle

Re: [Elecraft] SPOT for SSB feature request

2014-02-05 Thread Bill Frantz
utton, but it may be a good substitute. On 2/2/2014 4:30 PM, Bill Frantz wrote: A small item for the infinitely long desired feature list: I have noticed that SSB stations usually transmit on multiples of 500 Hz -- For example the Elecraft SSB net 14.3035 MHz and and W1AW/5 on 28.4570 MHz. If pre

Re: [Elecraft] # 5607 first contact QRP!

2014-02-06 Thread Bill Frantz
rs. I have one idea, but it's for a following email. Cheers - Bill, AE6JV ------- Bill Frantz| Truth and love must prevail | Periwinkle (408)356-8506 | over lies and hate. | 16345 Englewood Ave www

[Elecraft] The Technician Ten Radio

2014-02-06 Thread Bill Frantz
-- Bill Frantz| There are now so many exceptions to the 408-356-8506 | Fourth Amendment that it operates only by www.pwpconsult.com | accident. - William Hugh Murray __ Elecraft mailing list Home

Re: [Elecraft] The Technician Ten Radio

2014-02-06 Thread Bill Frantz
don't know it and won't find out until "the bad thing happens"*. Cheers - Bill * Sgt. Kerry Harris, Los Gatos Police Department ----- Bill Frantz| When it comes to the world | Periwinkle (408)356-8

Re: [Elecraft] Why won't my K3 work split in FSK-D mode?

2014-02-12 Thread Bill Frantz
MOst frequently for me is I haven't pressed A->B twice to set the second VFO to the same mode etc. as the primary one. Cheers - Bill, AE6JV ----- Bill Frantz| Re: Hardware Management Modes: | Periwinkle (408)

Re: [Elecraft] [K3] 12v outlet only puting out 11 volts

2014-02-17 Thread Bill Frantz
received the upgrade when built by Elecraft. ------- Bill Frantz| I like the farmers' market | Periwinkle (408)356-8506 | because I can get fruits and | 16345 Englewood Ave www.pwpconsult.com | vegetables without s

Re: [Elecraft] Buying a new K3/100 kit - Top 3 options?

2014-02-20 Thread Bill Frantz
ptions for a brand new K3/100? ------- Bill Frantz|The nice thing about standards| Periwinkle (408)356-8506 |is there are so many to choose| 16345 Englewood Ave www.pwpconsult.com |from. - Andrew Tanen

Re: [Elecraft] K2 digital mode questions

2014-02-20 Thread Bill Frantz
hen if some other mode doesn't work, probably just a change of USB/LSB will get it working. (But watch out for speeds in RTTY.) Cheers - Bill, AE6JV --- Bill Frantz| Truth and love must prevail | Periwinkle (4

Re: [Elecraft] KPA100 recommended max power for digital modes?

2014-02-22 Thread Bill Frantz
... While I do use [PSK] occasionally, that factor and the preponderance of "hello, brag sheet, goodbye" QSOs has soured me on the mode. It used to be a lot of keyboard to keyboard ragchew QSOs, but that is rare these days. No opportunity to get to know something about the ham y

Re: [Elecraft] New ham and the KX3

2014-02-25 Thread Bill Frantz
(Sean Wall) wrote: I was considering pairing it with a Buddipole antenna, as my development doesn't allow permanent antennas. While I use the KX3 at home, will I get decent range with the 10 watt output? -- Bill Frantz| The

Re: [Elecraft] Answered my own question: RTTY split

2014-02-26 Thread Bill Frantz
l Yaffey) wrote: > I finally realized I didn’t have VFO B set to the same mode! --- Bill Frantz|Security, like correctness, is| Periwinkle (408)356-8506 |not an add-on feature. - Attr-| 16345 Englewood Ave www.pwpconsult.

Re: [Elecraft] Elecraft compatible WX station

2014-03-02 Thread Bill Frantz
Given what you say, I doubt the Davis anemometer cups would survive a near hurricane blow. --- Bill Frantz| Truth and love must prevail | Periwinkle (408)356-8506 | over lies and hate. | 16345 Eng

Re: [Elecraft] [K3] Perfect for Field Day S&P ... Limited Production 700 Hz 8-Pole Filters

2014-03-02 Thread Bill Frantz
other hams. Cheers - Bill, AE6JV - Bill Frantz| Re: Hardware Management Modes: | Periwinkle (408)356-8506 | If there's a mode, there's a | 16345 Englewood Ave www.pwpconsult.com | failure mode. - Jerry Leich

Re: [Elecraft] [K3] Perfect for Field Day S&P ... Limited Production 700 Hz 8-Pole Filters

2014-03-02 Thread Bill Frantz
dwidth one notch. --- Bill Frantz| "The only thing we have to | Periwinkle (408)356-8506 | fear is fear itself." - FDR | 16345 Englewood Ave www.pwpconsult.com | Inaugural address, 3/4/19

Re: [Elecraft] K3 Off Grid

2014-03-03 Thread Bill Frantz
can reestablish the grid.  --- Bill Frantz| If the site is supported by | Periwinkle (408)356-8506 | ads, you are the product.| 16345 Englewood Ave www.pwpconsult.com |

Re: [Elecraft] [K3] K3 Off Grid

2014-03-05 Thread Bill Frantz
ppens... --- Bill Frantz|Security, like correctness, is| Periwinkle (408)356-8506 |not an add-on feature. - Attr-| 16345 Englewood Ave www.pwpconsult.com |ibuted to Andrew Tanenbaum| Los Gatos, CA

Re: [Elecraft] KX3 through TSA Security ?

2014-03-10 Thread Bill Frantz
io equipment in? ------- Bill Frantz| If the site is supported by | Periwinkle (408)356-8506 | ads, you are the product.| 16345 Englewood Ave www.pwpconsult.com | | Los G

Re: [Elecraft] P3 forgets set ranges in Fixed Track mode (WARC)

2014-03-15 Thread Bill Frantz
bands and discover 12 and 17 have had the fixed track frequency I set disappear. ------- Bill Frantz|Security, like correctness, is| Periwinkle (408)356-8506 |not an add-on feature. - Attr-| 16345 Englewood Ave w

Re: [Elecraft] K3 and JT65

2014-03-16 Thread Bill Frantz
I have run a lot of PSK on a K3/10. I have never had a problem running full power -- all 10-12 watts of it. Sometimes I type a lot too. I get good IMD reports. Don't worry. Be happy. Cheers - Bill, AE6JV --- Bill F

<    2   3   4   5   6   7   8   9   10   11   >