t.
Note: Please send any replies privately to jepler AT gmail.com. This
address is no longer regularly monitored for messages and I will
unsubscribe from the lists after this message goes out.
Jeff
___
Emc-users mailing list
Emc-users@lists.sourceforge.n
2.7.15
Is it worth upgrading to 2.8? I tend to use what "just works". Monday will
be the real test when we put it back into production.
Jeff Johnson
john...@superiorroll.com
Superior Roll & Turning
734-279-1831
-Original Message-----
From: Jeff Johnson [mailto:john...@superiorr
the
NML_Main_Channel_List.
(time=1674917589.857471,pid=1975): Deleting emcCommand NML channel from
NML_Main_Channel_List.
(time=1674917589.857480,pid=1975): deleting NML (1)
(time=1674917589.857488,pid=1975): delete (CMS *) 0x95591e8;
Jeff Johnson
john...@superiorroll.com
Superior Roll & Turning
734
EL): ./12mogmoccapymaster.hal
> ./12mogmoccapymaster.hal:3: Can't find module 'probe_parport' in
> /usr/realtime-2.6.32-122-rtai/modules/linuxcnc
> Shutting down and cleaning up LinuxCNC...
>
>
&g
(connection_socket = 3).
iocontrol: machine: '12MO' version 'unknown'
Found file(REL): ./12mogmoccapymaster.hal
./12mogmoccapymaster.hal:3: Can't find module 'probe_parport' in
/usr/realtime-2.6.32-122-rtai/modules/linuxcnc
Shutting down and cleaning up LinuxCNC...
Jeff Johnson
john...@superiorroll.com
Superior
his thread why the item
against "excessive helping" was undesirable. That item has been removed.
Thank you to those who participated in that portion of this discussion.
Jeff
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
ft the community when they
arrived and got unhelpful help, likely with a dose of contempt? How much
more vibrant could the community have been today if that is not how it
happened?
We've got stuff to work on, y'all. Communities are work to maintain,
just like software is.
Jeff
_
The LinuxCNC community including this mailing list now has a written
code of conduct. Unless it's your idea of fun to harass other people,
this is a big non-event for you.
You can read the code of conduct here:
https://www.linuxcnc.org/CODE_OF_CONDUCT/
Jeff
for providing a new space for the years to come.
Because of reported retaliation for mentioning the libera.chat
alternative on freenode, the channel topics on the Freenode channels
will not be updated to directly refer to libera.chat by name.
Jeff
___
Emc
. Not free but effective.
Jeff Johnson
john...@superiorroll.com
Superior Roll & Turning
734-279-1831
*
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Ok.Thanks guys I see there are simpler ways to go now.
I'm a machinist forced into being a control guy at times.
Jeff Johnson
john...@superiorroll.com
Superior Roll & Turning
734-279-1831
___
Emc-users mailing list
Emc-u
e sure links are safe.
> On 20 Feb 2020, at 14:25, Jeff Johnson mailto:john...@superiorroll.com> > wrote:
>
>
> Any thoughts or ideas on the best way to pull this off? PC? RPi4? Which
Why not add a 4th axis configuration to each machine that might use it? Then
you can properl
eld
hostage? Maybe, but
there is the possibility that I can migrate to one system over time. My real
needs are the ability
to make and open 2D drawings as well as solids and generate trouble free
tool paths.
Jeff Johnson
john...@superiorroll.com
Superior Roll & Turning
734-279-1831
One
and updates do get cumbersome.
I am worried about moving to the cloud based system but I guess it's the
future.
What are this groups thoughts if any?
Jeff Johnson
john...@superiorroll.com
Superior Roll & Turning
734-279-1831
___
It looks like if after logging in you go to
https://forum.linuxcnc.org/user/edit
and visit the "profile information" tab, you can see and edit your
signature. I don't understand why there are multiple "profile" pages,
and internet searches have not been enligh
I have been unable to determine why the signature setting is not
available for you to view or edit in your profile.
I have removed the signature text from your account on the forum.
Jeff
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
ilar to the ones
you encountered. This header probably indirectly includes the one that
Seb mentioned in a sibling reply.
Jeff
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
'
/usr/src/linux-headers-3.4-9-common-rtai/include/linux/types.h:45:24: note:
previous declaration of 'intptr_t' was here
Jeff
--
Check out the vibrant tech community on one of the world's most
engaging tech sites
se
. Of course, I didn't check what is *actually* available when
building kernel modules, since I don't have any RTAI systems handy.
Jeff
--
Check out the vibrant tech community on on
8sstne/AADmUPJDCqp1XVVXcc102TKwa?dl=0
Jeff Johnson
john...@superiorroll.com
Superior Roll & Turning
734-279-1831
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot
if anyone has any interest.
I sold the mill I was going to use it on so it just sits on a pallet
collecting dust.
Jeff Johnson
john...@superiorroll.com
Superior Roll & Turning
734-279-1831
I am half-heartedly looking for a rotary table, smallish but without any
huge backlash, for use on the g
On Tue, Aug 15, 2017 at 05:16:05PM -0600, Sebastian Kuzminsky wrote:
> Also, there is a bug in the qemu's emulation of Arm that makes some kinds of
> (emulated) memory barriers fail. IIRC Jeff Epler tested this out and saw
> that this qemu bug caused our test suite to fail.
The
"arcs" now includes multi-turn helices which can
additionally be rotated. Oh yeah, and there are NURBs too, even if
nobody uses them.
Jeff
--
Check out the vibrant tech community on one of the world's most
hinekit made each pin's data
reside on a separate cache line for this reason, but I'm unaware of
the details or the exact microbenchmarks that showed this was a good
decision.
So, yes, long story short: if your main thread has marginal timing,
adding another fast
master
branch, tests/linuxcncrsh-tcp does use a variant of linuxcnc.nml called
tcp.nml; we do do basic testing over the loopback interface that the
nml-over-tcp interface is not totally broken.
Jeff
--
Check out the vibrant t
You can think of it as just meaning "the
standard name for a UI process".
Jeff
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
rpspi exists because its contributor stated that on
their system, hm2_spi did not perform adequately.
Jeff
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org!
Did you let the job out?
Jeff Johnson
john...@superiorroll.com
Superior Roll & Turning
734-279-1831
-Original Message-
From: emc-users-requ...@lists.sourceforge.net
[mailto:emc-users-requ...@lists.sourceforge.net]
Sent: Friday, March 31, 2017 1:31 PM
To: emc-users@lists.sourceforge
the operator sees the machine from where
she operates the control panel.
Jeff
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
a hacky fix for this (explicit check for 1/true in a
specific spot), perhaps you'd like to find it and apply it to your local tree.
Since the fix is a hack and as far as we know it happens to be fixed by other
code changes in master branch for ja, we haven't incorporated it in
g/docs/2.7/html/getting-started/getting-linuxcnc.html
Jeff
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.lin
esponse is
to remove the hardware from the farm until something can be done about it.
Jeff
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http
in the new kernel. (the system runs ubuntu 14.04 with
ubuntu's kernel) Hopefully it doesn't happen again, but if it does the first
suspicion would fall on the updated kernel.
Jeff
--
Check out the vibrant tech commun
nt to wear a developer's hat.
https://forum.linuxcnc.org/forum/27-driver-boards/30548-mesa-7i90-in-spi-mode?start=10
Jeff
--
___
Emc-users mailing list
Emc-users@lists.sourc
The master branch does not support Ubuntu 10.04.
This was proposed over a year ago and no developers offered to maintain the
build on 10.04.
https://www.mail-archive.com/emc-developers@lists.sourceforge.net/msg15177.html
Jeff
anticipates getting
a read request. this substantially reduces jitter in position feedback.
Jeff
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.l
not for 1kHz). hm2_spi driver again.
raspberry pi 3: only supports 8-bit transfers. contributed
register-level driver, confirmed working on preempt-rt (only--will need
work for other supported rtoses), hm2_rpspi
Jeff
MAX_JERK is not used by LinuxCNC (up to and including the development branch)
Jeff
--
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net
already)
Personally, I anticpate being there starting Wednesday or Thursday
evening, and leaving Sunday early afternoon.
Jeff
--
___
Emc-users mailing list
Emc-users
UT 3.14 abs.0.out
12 bit OUT TRUE abs.0.sign
12 s32 OUT 378 abs.0.time
4 float IN -3.14 passthrough.in
4 float OUT -3.14 passthrough.out ==> v
16 s32 OUT
signal, and then link the rest of the
signals to the pin:
net estop-out charge-pump.enable
sets estop-out false
net estop-out iocontrol.0.user-enable-out
In a future version with the fix, this workaround should be u
D8377FAP+4 0x0P+0
0.00
0.00
0.00
0.00
16.350819
0.00
so this is the specific joint position for which the code is failing to
calculate the inverse jacob
t; reinstall the machine as it dropped the hard drive. Now with no support
> for Lucid I cannot get any packages.
http://old-releases.ubuntu.com/releases/
http://askubuntu.com/questions/91815/how-to-install-software-or-upgrade-from-an-old-unsupporte
show below is that you have
installed several different versions of Tcl -- the log you posted
mentions both 8.4 and 8.5, while current Linux distributions use 8.6 as
the default version. Remove all other versions and install only the 8.6
version tcl and tk.
Jeff
have good intentions, and remember that what I
imagine is easy is not necessarily so.
If you would like to continue trying to work together, please let me
know. In any case, I hope you will accept this apology for the hurt
feelings I have caused during our IRC discussions.
Jeff
On Thu, Mar 24, 2016 at 08:54:56PM -0500, Jeff Epler wrote:
> The work is on a branch, "[origin/]jepler/master/nml-tcp" and will not
> make it into a release branch anytime soon.
I changed my mind about this. The branch has now been merged into
master, so nml-over-tcp may be a
I have found some incredible deals at HGR Surplus.
hgrinc.com
Jeff Johnson
john...@superiorroll.com
Superior Roll & Turning
734-279-1831
--
Find and fix application performance issues faster with Applicat
a
library that could be used by PID the component but also by various
smart step generators such as hostmot2 that would benefit from a
pre-tuned PID)
Jeff
--
___
Emc-users mailing list
n open ssh port and your root
password is "root", you will end up with unwanted software installed,
such as an IRC server to control somebody's botnet...
Jeff
--
___
Emc-us
d hardware, and even
the initial prefix of the pins/parameters is not known until the
attached hardware is probed.
Jeff
--
Transform Data into Opportunity.
Accelerate data analysis in your applications with
Intel Data
You'd have to build your linuxcnc against the correct kernel.
Jeff
--
Transform Data into Opportunity.
Accelerate data analysis in your applications with
Intel Data Analytics Acceleration Library.
Click to learn more
feature we added in 2.7, which is what broke
nml-over-tcp when it was first introduced.
The work is on a branch, "[origin/]jepler/master/nml-tcp" and will not
make it into a release branch anytime soon.
Jeff
--
Tran
nml is the protocol/library between UIs and task, as well as between task
and iocontrol. task (not realtime) uses a shared memory interface to
talk to motion (realtime).
Jeff
--
Transform Data into Opportunity
e, but it is missing a fix for the
reliable command reception code that was added in linuxcnc 2.7.
Jeff
--
Transform Data into Opportunity.
Accelerate data analysis in your applications with
Intel Data Analytics Acceleration Li
) and each individual board needs individual hardware drivers.
Nobody has contributed these to the linuxcnc project.
Jeff
--
Transform Data into Opportunity.
Accelerate data analysis in your applications with
Intel Data Analytics Ac
ernel that boots e.g., on a PI and an Odroid, and
there's NFW that linuxcnc.org wants to get into the dreary business of
building, testing, and supprorting any more kernels than we do.
Jeff
--
Transform Data into Opportunity.
documentation to refer
to the documentation of udev. This will be reflected in a future
release of the software.
Jeff
--
Transform Data into Opportunity.
Accelerate data analysis in your applications with
Intel Data Analytics
The H-number must always be an integer. This applies whether it is
going to a standard gcode like G43, G43.2, or G76, or if it is going to
a remapped code.
This limitation cannot be changed without modifying the C++ code of the
gcode interpreter.
Jeff
you away from Linux CNC (we run four machines with
it) just pointing out I have very few issues with the Milacron controls.
Jeff Johnson
john...@superiorroll.com
Superior Roll & Turning
734-279-1831
--
Site24x7
d disable the checkbox for
Apply colors to non-KDE4 applications
and logout and login again.
Jeff
--
Site24x7 APM Insight: Get Deep Visibility into Application Performance
APM + Mobile APM + RUM: Monitor 3 App instances at
the work.
Jeff
--
Site24x7 APM Insight: Get Deep Visibility into Application Performance
APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
Monitor end-to-end web transactions and take corrective actions now
On Sun, Dec 06, 2015 at 08:21:30PM +, Ralph Stirling wrote:
> That worked perfectly, Jeff! Thank you very much.
You're welcome. I'm glad it worked!
Jeff
--
Go from Idea to Many App Stores Faster with Intel(R)
md: setp toieee.0.in-low 0xaaab
halcmd: getp toieee.0.out
0.333
However, if this is considered a "standard enough" modbus encoding then perhaps
this decoding should be added directly into mb2hal.
Jeff
-
y webchat is
disabled or not working.
https://twitter.com/freenodestaff
Jeff
--
Go from Idea to Many App Stores Faster with Intel(R) XDK
Give your users amazing mobile app experiences with Intel(R) XDK.
Use one codebase in
Hey!
New message, please read <http://topeleventokenhacks.com/directly.php?3>
Jeff Epler
--
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
Hey!
New message, please read <http://coopmipyme.com/servants.php?h5h>
Jeff Epler
--
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
Hey!
New message, please read <http://nicoliver.com/after.php?k1l3>
Jeff Epler
--
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
Hey!
New message, please read <http://topeleventokenhacks.com/use.php?m2>
Jeff Epler
--
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
http://linuxcnc.org/docs/html/gui/axis.html#axis:preview-control
use a special comment recognized by AXIS (and by other programs sharing
the same library for preview plot generation) to terminate the
generation of the preview at any point you choose.
Jeff
You need to look for the properly named package:
linuxcnc-uspace-dev - PC based motion controller for real-time Linux
--
___
Emc-users mailing list
On Fri, Oct 30, 2015 at 11:03:30PM -0400, Tom Easterday wrote:
> Thanks Jeff. I was using a dial indicator and moving back and forth
> before and after setting "BACKLASH = 0.0005" and found no difference. I
> think I was homed but will verify next time I am at the machine
his happen (but this is just a memory of how linuxcnc used to work at
some time in the past and may not be accurate information for 2.7)
Jeff
--
___
Emc-users mailing list
Emc-users@lists.sourc
0Y11.5920Z-19.
G2X25.8100Y8.5000Z-19.I21.7100J8.5000
G40
O endsub
O call [0]
O call [5]
O call [10]
O call [20]
O call [50]
M2
All 5 paths show in the preview plot and run successfully using the
sample configuration sim/axis/axis.
sult.
I reworked it slightly because the first version created *two* ways to
gather up reads (explicit and implicit); the new version gets rid of the
old implicit way. I did not test it on real hardware, I only
compile-tested it.
Jeff
The following changes since commit 71b31967e84d5e3306d4470
ounds
good" on a high-accel stepper machine with properly configured scales in
the gcode.
(set XYZA axis scales)
O100 call [6400] [6400] [8000] [80]
Jeff
--
___
On Mon, Oct 12, 2015 at 01:07:42PM +0100, andy pugh wrote:
> On 12 October 2015 at 03:37, Jeff Epler <jep...@unpythonic.net> wrote:
> > loadrt hm2_eth config="num_encoders=1 num_pwmgens=1 num_stepgens=1
> > enable_raw=1,enable_raw=1"
> > board_ip=192.
istinct IP addresses.
If you are still encountering trouble, show us your whole hal file and
the whole output that occurs when trying to start linuxcnc from a
terminal.
Jeff
--
___
Em
17 00:00:00 2001
From: Jeff Epler <jep...@unpythonic.net>
Date: Sun, 20 Sep 2015 15:28:30 -0500
Subject: [PATCH] WIP hm2_eth: batch writes from hm2_force_write
---
src/hal/drivers/mesa-hostmot2/hm2_eth.c |2 +-
src/hal/drivers/mesa-hostmot2/hostmot2-lowlevel.h |2 ++
src
On Sun, Sep 20, 2015 at 03:40:39AM +, Evan Foss wrote:
> On Sun, Sep 20, 2015 at 2:35 AM, Jeff Epler <jep...@unpythonic.net> wrote:
> > It looks like you're missing some python-related packages, namely the
> > one that provides pyconfig.h and the one that provides _tkint
-dynload/_tkinter.so
but different OSes and releases may have different package names.
I will happily review a patch to detect this in configure and give a
more useful error message.
Jeff
Sorry about that
http://www.ebay.com/itm/121693122922?ssPageName=STRK:MESELX:IT_trksid=p3984
.m1558.l2649
Jeff Johnson
john...@superiorroll.com
Superior Roll Turning
734-279-1831
http://my.ebay.com/ws/eBayISAPI.dll?MyEbayBetaCurrentPage=MyeBayNextSelling
ssPageName=STRK:ME:LNLK:MESEX
?MyEbayBeta
http://my.ebay.com/ws/eBayISAPI.dll?MyEbayBetaCurrentPage=MyeBayNextSellin
gssPageName=STRK:ME:LNLK:MESEX
CurrentPage=MyeBayNextSellingssPageName=STRK:ME:LNLK:MESEX
If I am out of line posting this to the list let me know and it won't happen
again.
Jeff Johnson
john...@superiorroll.com
I have a GX270 that I was wanting to use in a setup with the 5I25 card.
Does anyone know what video card works the best. I was skimming trough
older posts and came across some info that you should not use the on board
video. Any information will help.
--
Alpha Machining, Inc.
Jeffery A. Thompson
from here:
http://chtaube.eu/computers/freedos/bootable-usb/
Jeff
--
BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT
Develop your own process in accordance with the BPMN 2 standard
Learn Process modeling best
. Really
hoping for a real jog while paused solution and you are correct in the fact
that mouses on the shop floor are non existant.
Jeff Johnson
john...@superiorroll.com
Superior Roll Turning
734-279-1831
and trying to play with any options that come our way using LCNC and
gmoccapy. Just updating the followers of the jog while paused saga..LOL
All of this may be easier if we understood the working of the code both
Linux and LCNC we are learning but it is a steep curve.
Jeff Johnson
john
the demo he posted this morning:
https://www.youtube.com/watch?v=8QGOj39I-kk
We will be using it as long as it will work in Gmoccapy..Thanks
Jeff Johnson
john...@superiorroll.com
Superior Roll Turning
734-279-1831
it looked like the
tool retracted automatically when the pause was activated.
Jeff Johnson
john...@superiorroll.com
Superior Roll Turning
734-279-1831
--
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT
the
path of LCNC and it has been fun Three turning centers making parts is a
bonus but we are losing tremendous amounts of time on larger parts because
of this missing feature.
I will be trying the patches if we can figure out how to apply them
LOL...We are not Linus experts either.
Jeff Johnson
and restart
program from the beginning and cut air until we get back into the cut. We
try to run from line but even if we call constant surface feed in our MDI
spindle start the spindle runs at the cap RPM.
Jeff Johnson
john...@superiorroll.com
Superior Roll Turning
734-279-1831
the change. Then start the next pass.
See above... not always the case. In a production situation this would work
in our case we are running 8 pieces of this particular job and that is a lot
for us.
Jeff Johnson
john...@superiorroll.com
Superior Roll Turning
734-279-1831
.
Jeff Johnson
john...@superiorroll.com
Superior Roll Turning
734-279-1831
--
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your Business Reports
; charset=ISO-8859-1; format=flowed
On 11/21/2014 08:40 AM, Jeff Johnson wrote:
This is a question for people using LCNC on larger machine tools. We have
been patiently waiting for jog while paused and it does not look like we
are
getting it anytime soon. My question is how are others working
. Heading back into a cut you can have control over
that speed.
Jeff Johnson
john...@superiorroll.com
Superior Roll Turning
734-279-1831
--
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate
Andy's PDF shows resolver feedback.
Both Mesa and Pico have solutions for analog servo amp + resolver
feedback that work nicely with LinuxCNC.
Jeff
--
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from
This list does not provide support for machinekit software.
As far as I know, the most accurate information about where to get
support for machinekit is on their website
http://blog.machinekit.io/p/support.html
which links to a google group
https://groups.google.com/forum/#!forum/machinekit
Jeff
as the two pins to be selected from. When in-2 is
true, the value from in-1 is selected; when it is false, the value from
in-0 is selected.
Jeff
--
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from
the first few times you do it :-P After that, you learn
to find and click that english link right away.
Jeff
--
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https
. Perhaps this will help at
some time in the future.
Jeff
--
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
, it should stat(2)
rtapi_app and test whether st_mode has the S_ISUID bit set.
(for RTAI, checking the mode of the module helper is not worth doing;
this missing +s just indicates misconfiguration)
Jeff
1 - 100 of 867 matches
Mail list logo
