hi,
is it possible to assign a remote printer using the LPRng-protocol though I
have a CUPS on my mdk-box ? and if so, how can I do that ?
thanks for your hints and tips about !
bye hans
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
hi,
have got now the complete set of CD's again for mdk8.0, because something was
not readable during installation of the DHCP-setup.
anyway - have done now an entry in dhcpd.conf for fixed IP-addresses for my
connected hosts like this here :
group {
option subnet-mask 255.255.255.0;
hi Mikko,
oops - you was right - had forgot one Nr. in mozart
thanks !
the reason why I'll have fixed IP's are, that otherwise I won't be able to
copy or move files from anywhere to anywhere on my local-hosts.
But think I would have to setup a local DNS-Server also for a better
communication
hi,
once again I wanna ask this question : which graphic-card can be recommended
for mdk 8.2 i.e. 9.*
because have done now a big try with a few ATI's, noone is running without
problems. But all are running in my RH-box and does NOT have any problems.
meanwhile I got some postings, that the
hi,
have installed mdk 8.2 and kde 3.0.3 but didn't find where to choose
ISO-8859-15 ? any suggestions, hints, ideas ?
ind mdk-control-center I cannot find anything about, and in kde 3.0.3 is the
same : no hint about a ISO-8859-15-character-set.
hope anyone can give some light on this ?
bye
hi,
have discovered the follwing keyboard-behavior :
my predefined language in install is german, and ist okay so far but the
EURO-Sign.
I cannot get that EURO-Sign in kde3 or gnome, here I get ¤ as an EURO-Sign
and a correct ¢ as a cent-sign.
trying that characters on a console without
hi,
have got this message : memoryaccesserror (in origin : Speicherzugriffsfehler)
after doing that :
[root@hanna RPM]# locate k3d
the system was running for a about 1/2 hour without any action from myside.
can anyone explain me. what this error have to say ?
because any action I'll try now,
hi,
got a compile-error on compiling the file :
rage128-20021007-linux.i386.tar.bz2 = of course I have done a tar xvfj on it
and then I had to execute a shell-based prog called install.sh*
the logfile is this here :
cc -O2 -Wall -Wwrite-strings -Wpointer-arith -Wcast-align -Wstrict-prototypes
Try:
which cc
It should respond with /usr/bin/cc. If not, make sure that gcc and the
related packages are installed.
hi again,
have discovered a seldom thing here :
was looking in /usr/bin and found cc as well as gcc. doing a ls -al I saw,
that cc is a link to gcc and gcc is a link to
hi list,
am sorry about one more question, but where can I get ncurses-devel-5.2-23mdk
? was looking at some ftp-servers like vienna, graz, duesseldorf, zuerich -
all for mdk-9.0 directory, but cannot find this file. but need it for install
the kernel-source 2.4.19
hope anyone has an idea how
Am Montag, 7. Oktober 2002 23:12 schrieb [EMAIL PROTECTED]:
On Mon, 7 Oct 2002, hans schneidhofer wrote:
hi,
got a compile-error on compiling the file :
rage128-20021007-linux.i386.tar.bz2 = of course I have done a tar xvfj on
it and then I had to execute a shell-based prog called
hi list,
have now an updated kde3 and am having now discovered that after starting my
mdk8.2 box - it is starting automated, I get always the old startsymbol of
kde2 - then starts the kde3, but an old layout as well as in english, not in
german. logout again and login a newone time I get the
hi,
got a strange behavior within mandrake-control-center :
thats what I found out :
notmally I call mandrake-control-center, then network-internet and then
connect.
After finishing my surfing or sending the mail a hit the button Connect to
pptp-adsl again cuts the connection, but now I always
hi list,
is it possible to run 8.2 with kernel 2.4.19 ?
have now 2.4.18
thanks and bye
hans
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
(I have done it) but there are a couple of dependencies
that must be resolved as well (can't remember those off the top of my
head) but other than that, no sweat.
Cheers,
Jason
hans schneidhofer wrote:
hi list,
is it possible to run 8.2 with kernel 2.4.19 ?
have now 2.4.18
thanks
time into my problem
bye hans
Am Sonntag, 29. September 2002 09:52 schrieb hans schneidhofer:
hi list,
have now an updated kde3 and am having now discovered that after starting
my mdk8.2 box - it is starting automated, I get always the old startsymbol
of kde2 - then starts the kde3, but an old
Am Samstag, 28. September 2002 02:02 schrieb Vox:
rpm --rebuilddb
hi,
first at all thanks for your mail and help !
was running now rpm --rebuilddb and got this here :
Fehler: rpmdb: damaged header instance #615 retrieved, skipping.
does anyone know, what this stand for ?
thanks one time
hi list,
was looking for gnome-2.? and was wondering about no available
mdk-rpm-packages. is gnome-2.? for mdk-9 or also for 8.2 availble ? does
anone about ?
thanks for answers and hints
bye hans
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
hi,
after starting kde3 I always get the following message :
Sound server informational message:
Error while initializing the sound driver :
device /dev/dsp can't be opened (Permission denied)
The sound server will continue, using the null output device
and that is, what a ls -al /dev/dsp
hi list,
I think, I have done a mistake in trying to do an update the
chkconfig-1.2.19-2mdk into a chkconfig-1.3.4-11mdk.
Since I had done this I get always errormessages :
rpmdb: Overflow page 3325 has bogus prev_pgno value
rpmdb: Overflow page 95 has bogus prev_pgno value
rpmdb: Overflow
not good ?
how should it be ? which settings are required here ?
thanks once again
bye hans
Am Freitag, 27. September 2002 23:32 schrieb Todd Lyons:
hans schneidhofer wrote on Fri, Sep 27, 2002 at 10:32:50PM +0200 :
Error while initializing the sound driver :
device /dev/dsp can't be opened
hi,
have downloaded the jDictionary and had to install first the
java-runtime-einvironment - so far so good, but I don't have any idea
nor experiences with java, so I should know, what I have to doafter a
succesful install of this file :
j2sdk-1_4_0_02-linux-i586-rpm.bin
first I does a simple
hi list,
does anybody know, if the ATI FIRE GL X1 is available on the market and if -
where to get or when will that crad be availble ?
trying to find out something on ATI's Homepage seems to be a little
impossible. or does anone know of a graphiccard, which has the same featers
as the FIRE
hi
don't know, why, but an update the MySQL from 3.23.36 to all over abouth
seems to be impossible.
have tried now an old 39-release, a 41-release - all impossible. think, that
is really bad thing.
on my old rh7.1 box I have done an update from 32-release to 52 without any
problems - whats
hi list,
if I wanna do an update from 8.0 to 9.? - is it possible or can I only make
an update from 8.2 to 9.?
had no problems from 7.0 to 8.0, so now I'm hoping, that it would be possible
also from 8.0 to 9.?. For shure - I know, I have to wait for the final
release but some problems like a
hi list,
does anybody know, when mdk 9.? will be released ?
have now 8.0 and am very interested in updating the new 9 release. Because
have the best experiences with mdk versus the most other linux'es.
For shure, 8.0 has had some bugs, but comparing other linux'es with mdk (I
have installed a
hi list,
have successfully rpm -U updated from XFree86-3.3.6 to 4.2.0, but how can I
activate the running server from 3.3.6 to the new 4.2.0-release ?
as you can see, the active Xserver is :
XFree86 3.3.6 X-TT 1.3, patchlevel 21mdk
thanks for your helps and ideas, hints and tips
bye hans
hi,
am looking for the file MY.CNF as described in the README of mysql, but
didn't find such a file on my host.
have installed mdk8.0 with mysql from the mdk-CD.
have done an updatedb and locate MY.CNF as well as MY. and some playing
arounds, but nothing I've found. I am shure, that a few
to look again in the
webspace, so I can be shure, what I say now.
anyway, I am happy for your helps and ideas
thanks and bye
hans
Am Montag, 19. August 2002 22:50 schrieben Sie:
On Mon, 2002-08-19 at 21:09, hans schneidhofer wrote:
hi Benjamin,
a last question :
which Rage 128 do you have
hi,
am trying to get running Mesa with glut and a ATI Rage Pro 128 graphiccard
but have no experience with all that stuff. So I'm hoping that anyone is
there, who can give me a step-by-step way, what I have to do.
Or another question would be : are there some docs in the web available,
where I
-based GeForce ? so I had read, that the FireGL has 256 MB Ram and a
very good driver for OpenGL. But I dont't have any experiences right now.
thanks one more time
bye hans
Am Montag, 19. August 2002 18:30 schrieben Sie:
hello,
On Mon, 2002-08-19 at 09:05, hans schneidhofer wrote:
hi,
am
hi,
was looking in man tar for that, but doesn't find anything about. how can I
do a tar xvfz a bz2 file ?
thanks for helping
bye hans
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
hi,
am sorry about having one more question, but cannot get useable and uptodate
informations about mesa, glut and mindseye.
have downloaded mesa both versions mesa3.4.2 and mesa4.0.3, and glut3.7 and
cannot configure mesa because running ./configure --with-glut=/usr/lib/
results in :
hi,
am looking for a really good and special graphicsworkstation, running linux
with OpenGL, a very good graphiccard with OpenGL and sound-abilities.
Has anyone an idea, which equipment is commendable.
what I should do with it :
making animations, making pictures (combine together) and sound
hi again,
am sorry about to forgot to mention, that I'll do an upgrade to mdk 8.2 too.
But the very interesting thing I should know now is, which hardware-equipment
is commendable.
thanks again
bye hans
Am Dienstag, 13. August 2002 14:41 schrieben Sie:
On Tue, 13 Aug 2002, hans schneidhofer
- if possible
--:)
thanks and bye hans
Am Dienstag, 13. August 2002 19:09 schrieben Sie:
On Tue, 13 Aug 2002, hans schneidhofer wrote:
hi,
am looking for a really good and special graphicsworkstation, running
linux with OpenGL, a very good graphiccard with OpenGL and
sound-abilities
Am Dienstag, 23. Juli 2002 13:13 schrieben Sie:
Hans could you have top running on this box. Then as it starts to
slow down, grab a copy of top and post it to the group. Top will
tell you what the process is that is consuming more and more
memory and CPU kill that process if you can to
Am Dienstag, 23. Juli 2002 13:13 schrieben Sie:
Hans could you have top running on this box. Then as it starts to
slow down, grab a copy of top and post it to the group. Top will
tell you what the process is that is consuming more and more
memory and CPU kill that process if you can to
hi list,
have a mdk8.0-box and a pptp-connection.
my box is running over 24 hours a day. everytime I'm running
Mandrake-Control-Center and there the connection for internet over pptp, the
memory becomes slower and slower, equally, if the connection is on or off.
After a few hours every action
hi,
am looking, how to measure my network-cards and how to tune the ideal size of
packets.
the reason is, I have different 3Coms in my linux-boxes. One box has 2x100MB
= 3c905TX and the other box has a one 10 MB = 3c900.
now I was looking for the program sray, but cannot find it on linux. is
hi,
have got a LS 120 MB-drive, and would like to integrate it into my mdk-system
for linux as well as for handle msdos-formats (read-write)
how can I do that, or - where can I find some docs about ?
thanks for helping
bye hans
Want to buy your Pack or Services from MandrakeSoft?
Go to
hi,
have detected a memory-problem on my mdk8.0 box.
have installed for a few weeks now 256 MB RAM, upgraded from 64 MB.
Now, that I have the 256 MB RAM, the system sometimes runs out of memory.
Results are :
sometimes, the swap (=289 MB) couldn't be found
the memory-used field shows as
hi list,
as I posted yesterday of my problems about my mdk8.0-box, now I have one
aspect discovered :
have installed 2 network-cards 3c905x
eth0 is for internet
eth1 is for internal network
if I have an internetconnection actic running, then NO connection to the
remote host is possible.
hi,
was thinking, my prpblems with slowing down mdk 8.0 would be resolved, but it
appears again.
Now, what I have, is the complete /var/log/messages-file.
If anybody is there, who could help me, to do an analyse of it, maybe, we can
get a rid of some sources.
Because the file
hi,
have a little bit of trouble with pptp in understanding that :
pptp my.pptp.host debug name cananian remotename ntdialup
172.18.0.2:172.18.0.3
route add -net 172.18.0.0 netmask 255.255.0.0 gw 172.18.0.3
this is from the script /usr/share/doc/pptp-adsl-fr-1.0.2/USING
now what I cannot
of problems.
would be very interested of about your experiences about such problems - are
there some experiences in this list ?
bye
hans schneidhofer
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
seems to be a good idea. hasn't any ideas of problems, I would get, as I
bought this cards. normaly with 3Com 3c905 (1ooMB) I didn't have any problems
but with mixed picles like 3Com and realtec this is my first experience.
will try it - which cheaps do you have ?
thanks
hans schneidhofer
I
Am Dienstag, 11. Juni 2002 16:31 schrieben Sie:
Realtek 8139s from a variety of sources but they all seem to work.
perhaps I got the problem depending on my hardware ? maybe, I should take two
cards of the same type from realteks ?
anyway, thanks a lot for helping hints
bye
hans schneidhofer
.
but why can't I get a connection ?
have a mdk 8.0 running
thanks for helping
hans schneidhofer
can you make the connection to the outside DHCP (so it gets it's IP from
the ISP, and the inside connection 192.168.0.1?
No - I cannot get any connection outside the host
only the host-own
Am Montag, 10. Juni 2002 11:12 schrieben Sie:
hans schneidhofer wrote:
Destination host unreachable
the route shows this here :
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref
Use Iface 10.0.0.0
0 00 eth1
127.0.0.0 * 255.0.0.0 U 0 00 lo
so it seems to be okay.
but why can't I get a connection ?
have a mdk 8.0 running
thanks for helping
hans schneidhofer
Want to buy your Pack or Services from MandrakeSoft?
Go to http
dependencies, which are a possible source for errors. if so, how can a make a
circle about this - how can I do more test, to get rid of that ?
is anyone there, who have some experiences with such a behavior ?
thanks a lot for helping me
bye
hans schneidhofer
Want to buy your Pack or Services from
: starting the system with a reboot, does
NOT use the dsl-connection and the system was running fine a few days without
any problem - doesn't eat time.
now - is there anyone who have an idea ?
any help is very appreciated
hans schneidhofer
Want to buy your Pack or Services from MandrakeSoft
welcome
bye
hans schneidhofer
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Am Mittwoch, 29. Mai 2002 01:52 schrieben Sie:
hans schneidhofer wrote:
hi list,
first at all - is the the right place for such problems like rpcinfo ?
I have 2 mandrake - linuxboxes and 1 RH 7.1 Linuxbox. and one more winbox
98, between the the 2 mdk 8.0 and 8.1 I don`t have
cannot reach this box within my
internal network.
restarting the X-Server doesn`solve the problem - only power off is possible
and solves the problem.
Is this behavior a known bug or do I have some mistakes in my system ?
thanks for your ideas and helping
hans schneidhofer
Want to buy your Pack
:
rpcinfo: Kann den Portmapper nicht erreichen: RPC: Fehler des entfernten
Systems - Verbindungsaufbau abgelehnt.
But rpcd starts before nfsd - as I can see in ps ax
any ideas ? your help is very welcome
trhanks for helping me
hans schneidhofer
Want to buy your Pack or Services from
a lexmark USB-Printer, the port has been
detected, but with no effect - the printer is still very quired.
is anybody there, who would have an idea, whats going on with this crazy
motherboard ?
am using md 8.0
any ideas and helps are very welcome ... indead
thanks for helping
hans schneidhofer
] Error 2
Cannot see any "undeclared" functions in util_uri.c. Is this anything, you can
think about ?
Maybe, it's a good idea, to post this errormessage also to the
apache-mailinglist ?
Anyway - thanks for helping me
bye
Hans Schneidhofer
ave I to set a EnvironmentVariable or to integrade the lib with lib.so.conf ?
Thanks in advance for every helping step
bye
hans schneidhofer
hi,
am looking for a wine-mailing-list.
Have tried the news.group, but seems too complicated. Or is somebody there, who
can explain it, how to start some questions as easy as here ?
thanks in advance
hans schneidhofer
hi Bill,
have exact the same problems with this and a lot of other not found libs
although I have installed it.
If you get some solutions, can you post them to me ?
Thanks in advance
Hans Schneidhofer
Am Don, 04 Mai 2000 schrieben Sie:
Donno. From mandrake 7.2:
[root@bugsbunny /lib
? I'm really interested in looking forward,
which steps should be there in thought, before starting the daemon also. Maybe,
I have failed to notice something ?
Thanks for your ideas
bye Hans Schneidhofer
Am Son, 30 Apr 2000 schrieben Sie:
Hans Schneidhofer wrote:
Hi Ron,
seems, that you are right. Have installed now a furthermore Linux-Box for my
daughter and have discovered the same behavior again. Have took a look in the
taskmanager, and ... right, there was NO nfsd, RPC.mountd running
- try it by yourself
also and you have your choice or not - you can believe me.
Good - or not ?
bye
Hans Schneidhofer
Regards,
Ron. [AU] - sent by Linux.
:
set X graphics to 16 bit
Now a first experience is available.
Thanks again
bye
Hans Schneidhofer
hi,
am missing libstdc++ilibc6.1-1.so.2 this file. Does anybody know, where it can
be found ?
Is a Air (V 7.0)
Thanks ind advance
Hans Schneidhofer
be on the serverhost.
So, now my question here starts : ist it possible in any way, that I can
restart the nfs-serves, especially the new exported entries, without a reboot ?
Have tried /etc/sysconfig/network stop and start. But with no success.
Thanks in advance
Hans Schneidhofer
Am Sam, 29 Apr 2000 schrieben Sie:
Thus spake Hans Schneidhofer ([EMAIL PROTECTED]):
Am Fre, 28 Apr 2000 schrieben Sie:
On Thu, 27 Apr 2000, you wrote:
hi,
You
have to set X graphics to 16 bit and it solved the problem for me. I'm one of
those guys who usually starts reading
nyway, I'm very glad about your answer. It's very helpful yet.
Thanks again and bye
Hans Schneidhofer
Am Sam, 29 Apr 2000 schrieben Sie:
es ist possible:
# /etc/rc.d/init.d/nfs stop
# /etc/rc.d/init.d/nfs start
try that
there is a way to force the deamons to see the new permissio
in action :
is it possible to reinitialize a powered-off-scsi-device after powering on,
without a reboot of the system ?
Your help is very welcome. Thanks in advance
Hans Schneidhofer
windows-installation and
working within windows-environments.
Thanks in advance
Hans Schneidhofer
-directory-entries on
my complete system. For example comparing the doc-directory, info-directory and
much more. With the results I can make one doc (info, man)-server and so on.
Or is there available a better tool for such jobs anywhere ?
Thanks for your help. It's really welcome.
bye Hans
the other
users.
Anybody there, who have an interest in doing such little help ? If so, please
mail me back.
bye
Hans Schneidhofer
Hello Hans,
kdf you will find at kde-download website as targz file; missing documentation
seems to be a problem within mandrake, perhabs you should understa
Hi,
think, you are NOT hacked, because on one of my LM-Boxes, which is NOT
connected to the internet directly, I get the same mail-listing every night.
But I've NOT found any usefully explanation yet.
My msec-level is 3 on this box.
bye
Hans Schneidhofer
Am Die, 25 Apr 2000 schrieben Sie:
I
t;Air"
bye
Hans Schneidhofer
/proc/scsi/scsi shows it also. So what I
should know, how can I give a command for making a backup from directory
/home/foo to /home/foo/hans and how can I restore a backup with mt-st
Thanks in advance for helping
bye Hans Schneidhofer
. It isn't very understandable at a glance to read
mails with 363 charcters per line. You can believe me. Really.
bye
Hans Schneidhofer
?
The message I get is :
error in loading shared library. could not open libnewt.so.50 : no such file or
directory.
Alsu kudzu cannot be opened.
Thanks in advance again for your help
hans schneidhofer
: there is nothing, which cannot be resolved with our great linux.
Do you have the same experience with your winboxes ?
bye
Hans Schneidhofer
Am Son, 16 Apr 2000 schrieben Sie:
Hans,
Mandrake 7.0-2 (custom, development) omits installation of the
following essential networking RPMs:
portmap
rogram, so I can take a look on used libraries,
which are called through any programs, even like linxconf. Does anyone know,
what is the name of this function or little program ?
Thanks in advance for help
bye
Hans Schneidhofer
81 matches
Mail list logo