Re: [Flexradio] CW Skimmer

gt; Sent: Friday, January 09, 2015 2:58 PM > To: flexradio@flex-radio.biz > Subject: Re: [Flexradio] CW Skimmer > > Actually, the Knowledge Base is your friend. > http://kc.flexradio.com/KnowledgebaseArticle50357.aspx > > Tim Ellison, W4TME > Customer Experience Manager > FlexRadi

Re: [Flexradio] CW Skimmer

Radio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Tim Ellison, W4TME Sent: Friday, January 09, 2015 2:58 PM To: flexradio@flex-radio.biz Subject: Re: [Flexradio] CW Skimmer Actually, the Knowledge Base is your friend. http://kc.flexradio.com/KnowledgebaseArticle50357.aspx Tim Ellison, W4TME Cus

Re: [Flexradio] CW Skimmer

Actually, the Knowledge Base is your friend. http://kc.flexradio.com/KnowledgebaseArticle50357.aspx Tim Ellison, W4TME Customer Experience Manager FlexRadio Systems™ 4616 W Howard Ln, Suite 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com W

Re: [Flexradio] CW Skimmer

Sorry, don't have the info at my fingertips but 'Google' is your friend. Mike / W8DN On 1/9/2015 3:33 PM, Bill Hickey wrote: Anyone, Having no luck setting up CW Skimmer on Flex5000 any settings? My environment is Win7, PwrSDR v2.7.2, VAC 4.14, CW Skimmer trial 1.8. Thanks, 73, B

[Flexradio] CW Skimmer

Anyone, Having no luck setting up CW Skimmer on Flex5000 any settings? My environment is Win7, PwrSDR v2.7.2, VAC 4.14, CW Skimmer trial 1.8. Thanks, 73, Bill AB7AA ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz To opt out of the

[Flexradio] Resolved: [FlexRadio] CW skimmer tunes in reverse

Thanks to Alex VE3NEA If CW Skimmer is in the SoftRock-IF mode, you can flip its waterfall display vertically by changing the sign of Audio IF and changing the IQ / QI setting to the opposite value. Mark Lunday, WD4ELG Greensboro, NC FM06be wd4...@arrl.net http://wd4elg.blogspot.com

Re: [Flexradio] CW skimmer tunes in reverse

Mark make sure that SR is off and you have "Channels" in skimmer set to Left/Right=I/Q. Just a wild guess, can't get to the radio just now. Ron K0IDT On 12/12/2014 9:59 PM, Mark Lunday wrote: Flex 3000, SDR 2.7.2, CW skimmer 2.8 When I tune the Flex VFO, I see signals on the skimmer moving i

Re: [Flexradio] [FlexRadio] CW skimmer tunes in reverse

Typo – it is v1.8 Tried CW-U (my normal mode) and CW-L, no difference. Mark Lunday, WD4ELG Greensboro, NC FM06be wd4...@arrl.net http://wd4elg.blogspot.com ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz To opt out of the Reflecto

Re: [Flexradio] CW skimmer tunes in reverse

Hi Mark, CW-Skimmer expects the radio to be on the upper sideband CW-U, in stead of CW-L. This solved it for me. 73, Rob, PA3CNT 2014-12-13 4:59 GMT+01:00 Mark Lunday : > > Flex 3000, SDR 2.7.2, CW skimmer 2.8 > > When I tune the Flex VFO, I see signals on the skimmer moving in the > OPPOSITE

[Flexradio] CW skimmer tunes in reverse

Flex 3000, SDR 2.7.2, CW skimmer 2.8 When I tune the Flex VFO, I see signals on the skimmer moving in the OPPOSITE direction. The skimmer frequency moves in the correct direction and matches the VFO. But the signals move DOWN the Skimmer display when I tune the VFO up. Also, signals are the mir

Re: [Flexradio] CW Skimmer with large negative audio IF setting

Thanks all for the replies. One thing that IS different (just noticed) is the CW Skimmer version. On the F5K it’s 1.6. On the F3K rig it’s Skimmer v1.8. That might explain why I have sigh a large negative offset. Different version? Mark Lunday, WD4ELG Greensboro, NC FM06be wd4...@a

Re: [Flexradio] CW Skimmer with large negative audio IF setting

My CWSkimmer audio offset is 9700 Hz with PSDR 2.7.2 in CWU mode and an audio tone of 700 Hz. Yes the audio tone can be set to 725 Hz in which case the CWSkimmer offset would be 9725 with an IF (Hz) of 9000. 73, Rich - W3ZJ Greg Jurrens wrote: Mark The CW Skimmer offset you are reporting see

Re: [Flexradio] CW Skimmer with large negative audio IF setting

Mark The CW Skimmer offset you are reporting seems unusual but not out of the realm. For default PowerSDR settings, it will be 9600. 9000Hz for the software "IF" offset used plus 600Hz for the CW tone offset. Is it possible you have your CW offset set to 725Hz? 73, Greg - K5GJ On Sun, Apr 2

Re: [Flexradio] CW Skimmer with large negative audio IF setting

Mark, Could this be a case of using different sidebands (upper or lower) with CW on the two rigs? I had to change from "normal" CW (LSB) to upper side band CW on an Icom set in order to have a waterfall display behave "non inverted". Rob, PA3CNT 2014-04-27 17:13 GMT+02:00 Mark Lunday : > F3K,

[Flexradio] CW Skimmer with large negative audio IF setting

F3K, PSDR 2.7.2, Skimmer 1.8. Frequency readout from Skimmer setting ad MINUs 9725 Audio IF. On a separate computer, I have my F5K with PLUS 9575 Audio IF. Works on the F3K, but weird to have such a large offset. Is that normal? Just wondering. Mark Lunday, WD4ELG Greensboro, NC FM06be wd4.

[Flexradio] CW Skimmer and PSDR 2.x

Since moving to PSDR 2.x, I have never been able to get CW Skimmer to work correctly in the Direct I/Q mode. All of the KB articles are pre-2.0 and do not solve the problem. With 2.x the CW Skimmer water fall is compressed at the bottom with an exact image above when you spread the water fall out.

Re: [Flexradio] CW Skimmer

One addition. You need to set the upper end of the VAC cable's Sampling Rate (SR) to 192K and 2 for the max number of channels (NC) for ALL VAC cables. Direct IQ uses the radio's sampling rate (hence the "direct IQ) which can be as high as 192K for the FLEX-5000 and because you are sending bo

Re: [Flexradio] CW Skimmer

http://kc.flexradio.com/KnowledgebaseArticle50357.aspx?Keywords=skimmer 73 Val Walker Tuesday, October 09, 2012 6:56 PM Oct 09, 2012 I have been watching the Reflector's and have not seen a real or complete answer for how to make CW Skimmer work with PSDR v2.4.4 (wi

[Flexradio] CW Skimmer

Oct 09, 2012 I have been watching the Reflector's and have not seen a real or complete answer for how to make CW Skimmer work with PSDR v2.4.4 (with one Rx) in the Direct I/Q mode and CW Skimmer in the SoftRock IF mode. I have the Flex 5000A running PSDR v2.4.4 and CW Skimmer v1.71. It worked fin

Re: [Flexradio] CW Skimmer Question

Yes and also note that DDUtil provides mode change macros that let you turn Direct I/Q on and off automatically as you enter and leave CW mode eliminating the need for you to remember to do that. 73, Rich - W3ZJ Harry Williams wrote: Hi Larry...I believe Direct I/Q applies only to CW Skimmer a

Re: [Flexradio] CW Skimmer Question

DRM's Dream can use Direct I/Q. Mel k0pfx - Original Message - From: "Harry Williams" To: "Larry Bryan" ; Sent: Wednesday, October 03, 2012 11:14 AM Subject: Re: [Flexradio] CW Skimmer Question Hi Larry...I believe Direct I/Q applies only to CW Skimmer

Re: [Flexradio] CW Skimmer Question

Hi Larry...I believe Direct I/Q applies only to CW Skimmer and it must be unchecked for all your other sound card apps. 73, Harry W0LS -Original Message- From: Larry Bryan Sent: Wednesday, October 03, 2012 10:23 AM To: flexradio@flex-radio.biz Subject: [Flexradio] CW Skimmer Question

[Flexradio] CW Skimmer Question

I just downloaded CW Skimmer to see what this program is about. I set up the program Radio tab as SoftRock-IFand the PowerSDR VAC1 I check both boxes in the Direct I/Q option. However this morning, I found that this kills the audio to my other programs using VAC. Since I'm new at this can someone t

Re: [Flexradio] CW Skimmer Config

9, 2012 9:36 AM To: flexradio@flex-radio.biz Subject: [Flexradio] CW Skimmer Config I am trying to get CW Skimmer configured. I am using Flex 5000a, PSDR 2.3.5 and Win 7 64 bit, DDUtil, and Skimmer 1.7.1. I followed the FlexKB article for configuring In Direct I/Q mode with VAC but can not

[Flexradio] CW Skimmer Config

I am trying to get CW Skimmer configured. I am using Flex 5000a, PSDR 2.3.5 and Win 7 64 bit, DDUtil, and Skimmer 1.7.1. I followed the FlexKB article for configuring In Direct I/Q mode with VAC but can not seem to get any signals to CWS. CAT works ok but somewhat slow in responding to changes i

Re: [Flexradio] CW Skimmer - PowerSDR v2.4.4

party software, do you? >> Jim KJ2P >>>> Date: Mon, 17 Sep 2012 19:38:52 -0400 >>>> From: bh...@garlic.com >>>> To: hmills1...@yahoo.com; flexradio@flex-radio.biz >>>> Subject: Re: [Flexradio] CW Skimmer - PowerSDR v2.4.4 >>>> >>>>

Re: [Flexradio] CW Skimmer - PowerSDR v2.4.4

I use DDutil from which to hang third party software, do you? > Jim KJ2P >> > Date: Mon, 17 Sep 2012 19:38:52 -0400 >> > From: bh...@garlic.com >> > To: hmills1...@yahoo.com; flexradio@flex-radio.biz >> > Subject: Re: [Flexradio] CW Skimmer - PowerSDR v2.4.4 >

Re: [Flexradio] CW Skimmer - PowerSDR v2.4.4

using the Flexradio audio to feed Map65 directly without the need for VAC. It works flawlessly... 73...Jordan VE6ZT - Original Message - From: "Tim Ellison" To: Sent: Tuesday, September 18, 2012 8:00 AM Subject: Re: [Flexradio] CW Skimmer - PowerSDR v2.4.4 Nor can I. If

Re: [Flexradio] CW Skimmer - PowerSDR v2.4.4

y, September 18, 2012 8:00 AM Subject: Re: [Flexradio] CW Skimmer - PowerSDR v2.4.4 Nor can I. If the VAC cables are set as per the recommendations in the PowerSDR v2.3.5 Release Notes and you use the following KB article as a guide (http://kc.flexradio.com/KnowledgebaseArticle50357.aspx) it w

Re: [Flexradio] CW Skimmer - PowerSDR v2.4.4

00 From: bh...@garlic.com To: hmills1...@yahoo.com; flexradio@flex-radio.biz Subject: Re: [Flexradio] CW Skimmer - PowerSDR v2.4.4 I could never get it to work. Between the problem with CW Skimmer and the problem with DXLabs Winwarbler mentioned by Rich, W3ZJ, (below) I reverted back to Ver. 2.3.

Re: [Flexradio] CW Skimmer - PowerSDR v2.4.4

I use DDutil from which to hang third party software, do you? Jim KJ2P> Date: Mon, 17 Sep 2012 19:38:52 -0400 > From: bh...@garlic.com > To: hmills1...@yahoo.com; flexradio@flex-radio.biz > Subject: Re: [Flexradio] CW Skimmer - PowerSDR v2.4.4 > > I could never get it to wor

Re: [Flexradio] CW Skimmer - PowerSDR v2.4.4

Sent: Monday, September 17, 2012 7:38 PM Subject: Re: [Flexradio] CW Skimmer - PowerSDR v2.4.4 I could never get it to work. Between the problem with CW Skimmer and the problem with DXLabs Winwarbler mentioned by Rich, W3ZJ, (below) I reverted back to Ver. 2.3.5. --- I did have

Re: [Flexradio] CW Skimmer - PowerSDR v2.4.4

I could never get it to work. Between the problem with CW Skimmer and the problem with DXLabs Winwarbler mentioned by Rich, W3ZJ, (below) I reverted back to Ver. 2.3.5. --- I did have a little trouble with DXLab's WinWarbler because it doesn't like WDM. But since I feed the power speak

[Flexradio] CW Skimmer - PowerSDR v2.4.4

I am having the same problem posted earlier by Bernie, W4BGH, but have not been fortunate to find a fix.   I have checked and re-checked my settings in PowerSDR, CSK, and VAC 4.1 but can't get CSK to decipher. It was working fine prior to PSDR v2.4.4 upgrade.   Only suggestion I could not try was

Re: [Flexradio] CW SKIMMER AND V2.4.4

Always query the Knowledge Base, Grasshopper ;-) http://kc.flexradio.com/KnowledgebaseArticle50357.aspx Tim Ellison On 9/7/2012 8:51 PM, David Land wrote: Trying to setup CW Skimmer for the first time. I can get it to work on 3khz audio just fine using VAC1. Any way to get it to work with a larg

[Flexradio] CW SKIMMER AND V2.4.4

Trying to setup CW Skimmer for the first time. I can get it to work on 3khz audio just fine using VAC1. Any way to get it to work with a larger bandwidth? 73, Dave ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mail

Re: [Flexradio] CW Skimmer with PowerSDR v2.4.4

Tim, I found the problem. After the upgrade Skimmer decided to use VAC 3&4 instead of 1&2. Once this was changed it started to work. I don't know why Skimmer picked the different audio channels but it happened. Thanks for looking at the problem. 73 George W2GS On 9/5/2012 2:16 PM, Tim El

Re: [Flexradio] CW Skimmer with PowerSDR v2.4.4

Did I not read something about VAC cable 1 and 2 reversing in the latest version of PSDR..? 73...VE6ZT - Original Message - From: "Bernie Huth" To: Sent: Wednesday, September 05, 2012 12:03 PM Subject: [Flexradio] CW Skimmer with PowerSDR v2.4.4 I am not able to get CW

Re: [Flexradio] CW Skimmer with PowerSDR v2.4.4

Looks like you started CWSkimmer before PowerSDR with the VAC button enabled was started. SR: Cable #1 - 12000; Cable #2 - 96000 The sampling rates for both should show 96K is working properly. Tim Ellison On 9/5/2012 3:14 PM, Bernie Huth wrote: SR Range: 8000..192000 BPS Range: 8..16 NC Rang

Re: [Flexradio] CW Skimmer with PowerSDR v2.4.4

SR Range: 8000..192000 BPS Range: 8..16 NC Range: 1..2 Stream Fmt Limit: Cable Range Volume Ctl: Disabled SR: Cable #1 - 12000; Cable #2 - 96000 BPS: 16 NC: 2 RC Stms: 1 Pb Stms: 1 Bernie W4BGH - on 9/5/12 3:01 PM, Tim Ellison at t.m.ellison...@gmail.com wrote: > What are the setting

Re: [Flexradio] CW Skimmer with PowerSDR v2.4.4

Unfortunately, it¹s always been configured to use WDM-KS. -73- Bernie W4BGH --- on 9/5/12 2:45 PM, Rich - W3ZJ at r...@w3zj.com wrote: > That's working OK here Bernie. Note that if you had previously configured your > VAC Audio to use MME it is now confgured to use WDM-KS under V2.4.4 a

Re: [Flexradio] CW Skimmer with PowerSDR v2.4.4

What are the settings of your VAC cables? Tim Ellison On 9/5/2012 2:53 PM, George wrote: Bernie and others, I am seeing something similar. I see no noise in the CW skimmer waterfall. I use the cat data from DDUtil which is being displayed in the frequency box. Also I checked the operation of

Re: [Flexradio] CW Skimmer with PowerSDR v2.4.4

Bernie and others, I am seeing something similar. I see no noise in the CW skimmer waterfall. I use the cat data from DDUtil which is being displayed in the frequency box. Also I checked the operation of the VAC channels using WW in both PKS31 and RTTY and that worked FB. I have checked my

[Flexradio] CW Skimmer with PowerSDR v2.4.4

I am not able to get CW Skimmer v 1.71 to decode properly with PowerSDR v2.4.4 and a Flex-3000. The radio CAT commands seem to be working correctly using PowerSDR v2.4.4 and DXLabs Commander. CW Skimmer is setup as a secondary CAT control in Commander using Kenwood CAT protocol. The correct freq

[Flexradio] CW Skimmer is kicking my behind - again!

After Yet Another Database Import (why does PowerSDR v2.3.5 keep revert to defaults every now and then?) CW Skimmer is about 300Hz off frequency... again. No SR. I see what I'm listening to about 300Hz higher than the green arrow. I click on the frequency and skimmer moves everything down 300Hz...

Re: [Flexradio] CW Skimmer not decoding I/Q

dan Arndt VE6ZT" Cc: "Marshall" ; Subject: Re: [Flexradio] CW Skimmer not decoding I/Q Also i am interested on it. El 02/07/12 21:22, Jordan Arndt VE6ZT escribió: If this is correct, I'd like to know more about using the Flexradio Audio lines... I was under the impression that

Re: [Flexradio] CW Skimmer not decoding I/Q

? 73...Jordan VE6ZT - Original Message - From: "Marshall" To: Sent: Monday, July 02, 2012 1:04 PM Subject: Re: [Flexradio] CW Skimmer not decoding I/Q Thanks for all the replies. I followed a suggestion by Bill, W9OL, and set the CWS Signal I/O device to "Flexradio Audio&quo

Re: [Flexradio] CW Skimmer not decoding I/Q

: Sent: Monday, July 02, 2012 1:04 PM Subject: Re: [Flexradio] CW Skimmer not decoding I/Q Thanks for all the replies. I followed a suggestion by Bill, W9OL, and set the CWS Signal I/O device to "Flexradio Audio", which I understand to be the direct I/Q data from the Firewire driver.

Re: [Flexradio] CW Skimmer not decoding I/Q

Thanks for all the replies. I followed a suggestion by Bill, W9OL, and set the CWS Signal I/O device to "Flexradio Audio", which I understand to be the direct I/Q data from the Firewire driver. This is working perfectly, and I like that I do not have to change PowerSDR settings to use VAC for a

Re: [Flexradio] CW Skimmer not decoding I/Q

This is your problem. IQ data is transferred over a 2 channel (one for I and one for Q). Are you starting and enabling VAC in PowerSDR first? When you do this, the VAC cable should come up in 2 channel mode. Tim Ellison On 7/1/2012 4:07 PM, Marshall wrote: Sound properties for virtual cable

[Flexradio] CW Skimmer not decoding I/Q

I am having trouble with CW Skimmer 1.71 on my Flex 3000 running PowerSDR v2.3.5 on Win7 64bit. CAT control seems fine, it is the IQ data that is not working, no CW signals appear in the CWS display. My setup is: VAC 4.11 (licensed), SR 8000-96000, BPS 8-16, NC 1-2, Line only checked, Cable ran

Re: [Flexradio] CW SKimmer - CAT Control Not Working?

Bill - CWskimmer shows the call signs across a wide bandwidth. Try running Fldigi in CW mode, and narrow the receiver bandwidth to hear a single clear signal. Much simpler than trying to select what is happening. 73 Ken AC0HO On Sat, Nov 19, 2011 at 10:40 AM, Bill Ackerman wrote: > Thanks

Re: [Flexradio] CW SKimmer - CAT Control Not Working?

Thanks to all for the help, both on and offline. No joy yet in my shack. I've tried countless combinations with no luck. I am also a fiddler, a fairly stubborn one, and bear the scars from a life of banging my head against the wall, especially on PC communications problems. I've only been a

Re: [Flexradio] CW SKimmer - CAT Control Not Working?

On 19-11-2011 14:17, Bob VanFossen wrote: Bill, that description is for a flex 1000. check this one out. http://kc.flexradio.com/KnowledgebaseArticle50357.aspx Bob, K4DJG ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail

Re: [Flexradio] CW SKimmer - CAT Control Not Working?

Bill, others are going to give you far more erudite answers but my impression after fiddling with lots of various 3rd party software add-ons is that CAT control is just temperamental and a bit flakey. I don't know whether this is coming from the radio or from the software or from some evil miscomb

[Flexradio] CW SKimmer - CAT Control Not Working?

Bill, that description is for a flex 1000. check this one out. http://kc.flexradio.com/KnowledgebaseArticle50357.aspx Bob, K4DJG ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_

Re: [Flexradio] CW SKimmer - CAT Control Not Working?

-Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Bill Ackerman Sent: Saturday, November 19, 2011 4:34 AM To: FlexRadio@flex-radio.biz Subject: [Flexradio] CW SKimmer - CAT Control Not Working? I've downloaded the

[Flexradio] CW SKimmer - CAT Control Not Working?

I've downloaded the eval version of CW Skimmer (1.71) and have followed the best I can the instructions in this Flex KB article: http://kc.flexradio.com/KnowledgebaseArticle50355.aspx All is working well in CW Skimmer in terms of decoding the audio stream, but I am unable to control the freque

[Flexradio] CW-Skimmer

Message: 7 Date: Wed, 9 Nov 2011 15:10:34 -0600 From: Tony Estep To: flexradio@flex-radio.biz Subject: Re: [Flexradio] CW Skimmer Message-ID: Content-Type: text/plain; charset=ISO-8859-1 Any help appreciated... John, ve3dvv Tnx Bob, Tony and others who responded. Obviously I had

[Flexradio] CW-Skimmer

dnesday, November 09, 2011 7:34 AM Subject: RE: [Flexradio] CW Skimmer > Here is how It is setup here on 3K. On PSDR VAC check direct IQ > On Skimmer be sure to start the radio. (Upper left box) > > Bob K4DJG > > -Original Message- > From: fl

[Flexradio] CW-Skimmer

dnesday, November 09, 2011 7:34 AM Subject: RE: [Flexradio] CW Skimmer > Here is how It is setup here on 3K. On PSDR VAC check direct IQ > On Skimmer be sure to start the radio. (Upper left box) > > Bob K4DJG > > -Original Message- > From: fl

Re: [Flexradio] CW Skimmer

27;" Sent: Wednesday, November 09, 2011 7:34 AM Subject: RE: [Flexradio] CW Skimmer Here is how It is setup here on 3K. On PSDR VAC check direct IQ On Skimmer be sure to start the radio. (Upper left box) Bob K4DJG -Original Message- From: flexradio-boun...@flex-radio.biz [mailt

Re: [Flexradio] CW Skimmer

Any help appreciated... > >>> John, ve3dvv >>> >>> = John, here is my setup for CW-Skimmer. Of course, the first thing to do is get DDUtil and VAC set up and working, as you must do in any event with any Flex installation. On the DDUtil RCP screen, I have RCP2 set to a virtual p

Re: [Flexradio] CW Skimmer

al Message - From: "John Vandenberg" To: Sent: Tuesday, November 08, 2011 9:49 PM Subject: [Flexradio] CW Skimmer Anyone knows how to setup CW SKIMMER on F5K? The CAT seems to work, but don't see any white noise or CW (yes VAC is enabled My setup PowerSDR VAC driver MME

Re: [Flexradio] CW Skimmer

John: I have a similar problem. I can make skimmer work if I select tranceiver (3 kHz bandwidth) mode. But if I select IQ, it doesn't work. Bill Tynan, W3XO - Original Message - From: "John Vandenberg" To: Sent: Tuesday, November 08, 2011 9:49 PM Subject: [Flexra

Re: [Flexradio] CW Skimmer

iz Subject: [Flexradio] CW Skimmer Anyone knows how to setup CW SKIMMER on F5K? The CAT seems to work, but don't see any white noise or CW (yes VAC is enabled My setup PowerSDR VAC driver MME, Input Vac1, Output Vac2, Enable Vac is Checked, Buffer size 512

[Flexradio] CW Skimmer

Anyone knows how to setup CW SKIMMER on F5K? The CAT seems to work, but don't see any white noise or CW (yes VAC is enabled My setup PowerSDR VAC driver MME, Input Vac1, Output Vac2, Enable Vac is Checked, Buffer size 512 Sample rate 48000 CW Skimmer

[Flexradio] cw skimmer

Found the problem the skimmer. cockpit error. Jim K5TC ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.

Re: [Flexradio] cw skimmer

There must be something with the portpair. Check it out :-) This is always what I experience having the same. 73s - Erik - OZ4KK I have set up skimmer as per knowledge center data. However, down in the lower left hand corner or skimmer the little icon is red and when highlighted it says, COM por

Re: [Flexradio] cw skimmer

Do you have another program using that com port when you are using Skimmer? 73 Neal Campbell Abroham Neal Software www.abrohamnealsoftware.com (540) 645 5394 On Sat, Sep 25, 2010 at 9:35 PM, jim howard wrote: > I have set up skimmer as per knowledge center data. > However, down in the lower

[Flexradio] cw skimmer

I have set up skimmer as per knowledge center data. However, down in the lower left hand corner or skimmer the little icon is red and when highlighted it says, COM port not available. I use mmtty with same port and it works fine. any ideas.   Jim, K5TC

Re: [Flexradio] CW Skimmer

very cool thanks Dave From: Dave AA6YQ To: Lee A Crocker ; Flexradio Sent: Thu, June 3, 2010 11:27:18 PM Subject: RE: [Flexradio] CW Skimmer >>>AA6YQ comments below -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexr

Re: [Flexradio] CW Skimmer

>>>AA6YQ comments below -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz]on Behalf Of Lee A Crocker Sent: Thursday, June 03, 2010 9:54 PM To: Flexradio Subject: Re: [Flexradio] CW Skimmer This is not possible at this time. The

Re: [Flexradio] CW Skimmer

This is not possible at this time. The code was written by the author of CW skimmer but he decided not to implement it because the set VFO B feature is not supported across all CAT radios. Apparently only radios that can speak Kenwood CAT could respond to a set VFO B command. It is not an iss

[Flexradio] CW Skimmer

I've just loaded Cw Skimmer and it's working great thanks the Dudley. Have one question about using skimmer when working split mode.  When working split it would be nice to click on the station that the DX just worked and have the xmit vfo(B) go to that freq.  Is there any way to have vfo(b) fol

[Flexradio] cw skimmer and second receiver

I am running Flex 5000A with second receiver and PowerSDR v1.18.5 Has anyone tried to set up skimmer to run on the second receiver? If so, were you successful in getting a fully operational configuration? What I am trying to do, is operate say 20mt SSB on the main A and have the second

Re: [Flexradio] cw skimmer and second receiver

ril 16, 2010 12:54 AM To: FlexRadio@flex-radio.biz Subject: [Flexradio] cw skimmer and second receiver Trying to get cwskimmer to work on second receiver only. http://kc.flex-radio.com/KnowledgebaseArticle50379.aspx Tried the above link and it refers to selecting option to use second

[Flexradio] cw skimmer and second receiver

Trying to get cwskimmer to work on second receiver only. http://kc.flex-radio.com/KnowledgebaseArticle50379.aspx Tried the above link and it refers to selecting option to use second receiver. That option is not on my PowerSDR v1.18.5. Working great on main receiver, any suggestions on

Re: [Flexradio] CW Skimmer misreads my frequency

Make sure to only use CWU mode, and turn OFF Spur Reduction. Most likely the cause. John N3WT - Original Message - From: "Mark Lunday, WD4ELG" To: flexradio@flex-radio.biz Sent: Friday, March 26, 2010 3:19:27 PM GMT -05:00 US/Canada Eastern Subject: [Fle

[Flexradio] CW Skimmer misreads my frequency

Any reason why this might happen? Stations are being reported 3 kHz or so higher than the actual frequency. F3K SDR 1.18.3 Mark Lunday WD4ELG Greensboro, NC - FM06be wd4...@arrl.net http://wd4elg.net http://wd4elg.

Re: [Flexradio] CW Skimmer requirements

To run CW Skimmer in the I/Q mode on the primary 5000a receiver, you also need com0com. com0com is a free download. VAC is not needed, even though VAC "connections" are referenced below. Setup: In PowerSDR Setup, click: AUDIO, VAC, OUTPUT TO VAC, OK In Skimmer: VIEW, SETTINGS, RADIO, check S

Re: [Flexradio] CW Skimmer requirements

Ups, that was a doubling, sorry Tim :-( /Erik Andrew wrote: I have a 5000a, and want to run CW Skimmer, what programs do I need on my computer to accomplish this? You need: VAC, com0com and for instance CW Skimmer. You can see how to set it up at: http://kc.flex-radio.com/Knowledgebas

Re: [Flexradio] CW Skimmer requirements

Andrew wrote: I have a 5000a, and want to run CW Skimmer, what programs do I need on my computer to accomplish this? You need: VAC, com0com and for instance CW Skimmer. You can see how to set it up at: http://kc.flex-radio.com/KnowledgebaseArticle50357.aspx Here you also have the info on

Re: [Flexradio] CW Skimmer requirements

%20skimmer -Tim -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Andrew Sent: Thursday, September 10, 2009 2:02 PM To: flexradio@flex-radio.biz Subject: [Flexradio] CW Skimmer requirements I have a 5000a, and want to run

[Flexradio] CW Skimmer requirements

I have a 5000a, and want to run CW Skimmer, what programs do I need on my computer to accomplish this? ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.m

[Flexradio] CW Skimmer frequency calibration

Now that I have the interface working I have another question on frequency calibration. The skimmer frequency readings are not consistent with the actual frequency, they appear to be about 8-10KHz higher than the actual frequency. I do not have SR on, so that is not the cause. Any info to head m

Re: [Flexradio] CW Skimmer and PowerSDR

Thanks Mike, That made the difference. Phil K3TUF Mike Penkas wrote: It didn't work for me with WDM so switched to MME and it took off. Mike WA8EBM - Original Message - From: "Phil Theis" To: "'Tim Ellison'" ; Sent: Sunday, September 06, 2009 8:38

Re: [Flexradio] CW Skimmer and PowerSDR

The Format was indeed Cable Format, I changed to Cable Range, restarted the driver and still get the same error. Is there another something I should change? thanks Phil k3TUF Tim Ellison wrote: What is the Stream Format in the VAC channel setup (Control Panel)? If it is Cable Format change both

Re: [Flexradio] CW Skimmer and PowerSDR

What is the Stream Format in the VAC channel setup (Control Panel)? If it is Cable Format change both cables to Cable Range. -Tim -Original Message- From: Phil Theis [mailto:p...@k3tuf.com] Sent: Sunday, September 06, 2009 8:38 PM To: Tim Ellison; flexradio@flex-radio.biz Subject: C

[Flexradio] CW Skimmer and PowerSDR

Yes, and I tried an earlier version; trunk. Same results. PowerSDR only on. VAC is set up with two cables and Configuration is as in the KB article. The error is PortAudio Error; Invalid Device. any more thoughts appreciated. Phil K3TUF Did you start PowerSDR and enable VAC before staring CW

[Flexradio] CW Skimmer and PowerSDR

Using the KB article to set up CW Skimmer Configuration using VAC Direct I/Q I get the error "invalid device" Using 5000 and 1.19 of PowerSDR Any thoughts? thanks, Phil K3TUF ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex

Re: [Flexradio] CW Skimmer

ginal Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Erik Jakobsen Sent: Thursday, August 13, 2009 10:40 AM To: Tim Ellison Cc: flexradio@flex-radio.biz Subject: Re: [Flexradio] CW Skimmer There I think, that Dudley's idea with inst

Re: [Flexradio] CW Skimmer

W requires post processed audio, so the VAC settings in PowerSDR are different. -Tim -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Burt Sent: Thursday, August 13, 2009 7:23 AM To: flexradio@flex-radio.biz Subject: [Flexra

Re: [Flexradio] CW Skimmer

io.biz] On Behalf Of Burt Sent: Thursday, August 13, 2009 7:23 AM To: flexradio@flex-radio.biz Subject: [Flexradio] CW Skimmer Can you be setup for CW Skimmer and MixW without changing anything? ___ FlexRadio Systems Mailing List FlexRadio@flex

[Flexradio] CW Skimmer

Can you be setup for CW Skimmer and MixW without changing anything? ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradi

Re: [Flexradio] CW Skimmer/LOGic CAT sharing

Karnauskas N1UW Sent: Monday, August 03, 2009 12:40 PM To: flexradio@flex-radio.biz Subject: [Flexradio] CW Skimmer/LOGic CAT sharing Greetings, Flexers: I can run CW Skimmer and LOGic 8 (logging program) simultaneously with SDR...kind of. After starting SDR, the next program loaded (i.e., CW Sk

[Flexradio] CW Skimmer/LOGic CAT sharing

Greetings, Flexers: I can run CW Skimmer and LOGic 8 (logging program) simultaneously with SDR...kind of. After starting SDR, the next program loaded (i.e., CW Skimmer) can interact with SDR (i.e., "point and shoot" tuning) but the second program loaded (i.e., LOGic) cannot interact (i.e., read f

Re: [Flexradio] CW skimmer and N1MM logger

Apologies, I'm not explaining this very well -- this is my first experience with both DDUtil and the N1MM logging software. What I called the "macro buttons" in the N1MM logger are the buttons on the logger Entry Window with labels such as "CQ", "Exch", "My Call" and so forth. When I conn

Re: [Flexradio] CW skimmer and N1MM logger

On 7/28/2009 8:13:53 AM, Samuel Cartinhour (sc...@cornell.edu) wrote: Last night I downloaded DDUtil and set it up to run the N1MM logger. I am still using vCom rather than com0com at this point, and I have not yet brought CW skimmer into the picture. I've had partial success. Both DDUtil and N

Re: [Flexradio] CW skimmer and N1MM logger

Last night I downloaded DDUtil and set it up to run the N1MM logger. I am still using vCom rather than com0com at this point, and I have not yet brought CW skimmer into the picture. I've had partial success. Both DDUtil and N1MM logger respond to frequency changes when I scroll around the b

  1   2   >