> KERNEL /VMLINUZ-2.4.18-14 RO ROOT=LABEL=/
kernel /vmlinuz-2.4..18-14 rw root=/ init=/bin/sh
OR
kernel /vmlinuz-2.4.18-14 rw root=/ init=/bin/bash
OR
change ro to rw and append 2 (or level=2)
at the end of the line
===
Sir, tried all the three options but it did not work. At last tried
Dear Mani,
As per your solution provided through the link, please guide where to add the
line as rw init=/bin/sh in the kernal line
this is the kernal line :
KERNEL /VMLINUZ-2.4.18-14 RO ROOT=LABEL=/
Tried it but after pressing b (booting) coming across error as kernel panic, so
not able t
Dear fellow,
After defining 'single' at the last of kernal line, coming across kernal panic
error. Pl guide what could be the problem...? thanks
MALKIAT
At grub prompt hit "e" on your keyboard, highlight and edit the line
that starts with "kernel." and at the end append the word "single
"
# vim /etc/passwd
n from the first line ...erase the 'x' beside root.! ur root is passwrodless
now..!
Amar Akshat
On Mon, Aug 18, 2008 at 12:48 PM, MALKIAT BENIPAL <[EMAIL PROTECTED]>wrote:
> Dear all,
> I forgot root password of my linux (red hat). Could any please guide
Dear all,
I forgot root password of my linux (red hat). Could any please guide if I
could locate it through any way or I have reinstall the same.
Thanks/MALKIAT
[EMAIL PROTECTED]
Connect with friends all over the world. Get Yahoo! India Messenger at
http://in.messenger.yahoo.com/?wm=n/
Hello Guys,
I have distro of Mandrake 10.1 supplied with my system. Earlier I had installed
it with Windows XP. Due to some problem with the hard disk, I replaced it with
new one. Now after partitioning my HDD as C,D & E and installing Win XP on C,
when I am trying to install the said Linux, I
Dear guys,
Just from Mandrake 9, I switched over to Mandrake 10.1. I installed it afresh.
In Ver.9 my tv tuner card (brooktree878) was working fine. But in Mandrake's
10.1 though modules.conf is compiled without any error and the sequence of
commands are same which I was using in the file mod
MALKIAT BENIPAL <[EMAIL PROTECTED]> wrote:Date: Fri, 1 Jul 2005 21:05:01 -0700
(PDT)
From: MALKIAT BENIPAL <[EMAIL PROTECTED]>
To: ilugd@lists.linux-delhi.org
Subject: [ilugd] configuration for Mandrake 10.1
Dear guys,
I have celeron 1.1 GHz 128 MB SDRAM 40 GB HDD with 9.0 Mand
Dear guys,
I have celeron 1.1 GHz 128 MB SDRAM 40 GB HDD with 9.0 Mandrake already
installed. Now, I wish to upgrade it with Mandrake 10.1 I have. Kindly guide if
this configuration is sufficient for Mandrake 10.1. Secondly, on the Mandrake
10.1 CDs, OEM desktop is mentioned over these CDs. Wh
Check for modem initialisation string. For this purpose you can refer the
manual of your modem. For Initialiation String for eg. ATX01..so on.
Malkiat
mari muthu <[EMAIL PROTECTED]> wrote:
hello friends
can any one tell me how to configure modem in mandrake10.1
it had detecteded my modem but h
Hello, did anyone compiled and installated lirc on Mandrake 9.0 successsfully ?
If so, valuable guidance is needed. I visisted www.lirc.org but their HOWTOs in
this connection is not proper. So I shall be grateful if anyone can suggest me
the link about HOWTOs of lirc. i did googling also but of
Hello, did anyone compiled and installated lirc on Mandrake 9.0 successsfully ?
If so, valuable guidance is needed. I visisted www.lirc.org but their HOWTOs in
this connection is not proper. So I shall be grateful if anyone can suggest me
the link about HOWTOs of lirc. i did googling also but of
I regret to state that I posted a few mails regarding my problems related to
Linux (Mandrake) but did not get any response. I find it as useless. I always
check my mails relating to ILUGE but do not find anyone which is of any usage
to me. Kindly remove my registration from your mail box.
malk
Hi guys,
I am using default xawtv supplied with Mandrake 9.0 except volume control all
the functions are working well. For volume control i have to use the volume
control of linux. Please let me know a good package for viewing tv on my PC
using Mandrake 9.0 platform except xawtv and oblige.
Hi guys,
I have recorded a celebration movie in my sony handycam. Now from my Sony handycam, I
wish to record this movie on my hard disk. Can someone guide me how I can do this in
Linux. I shall be very much thankful to you. I am using Mandrake 9.0.
with regards,
Malkiat
MALKIAT
[EMAIL
Hello guys,
I have an intex tv tuner card. Its working perfectly in linux but i am not able to use
its remote in linux because of non-availability of linux driver for the same. I had
learned that in linux we can even use the home tv remote by installing the particular
driver supplied for a par
Hello guys,
I have an intex tv tuner card. Its working perfectly in linux but i am not able to use
its remote in linux because of non-availability of linux driver for the same. I had
learned that in linux we can even use the home tv remote by installing the particular
driver supplied for a par
dear all,
At one of the PC I have installed win98/win2k/Mandrake 9.0. While installing Mandrake
9.0 I have assigned to /boot a 10 MB space (/dev/hda7) and with the help of bootable
floppy in /etc I compiled lilo and then issued the command as dd if=/dev/hda7
of=bootsect.lnx count=1 bs=512
dear all,
At one of the PC I have installed win98/win2k/Mandrake 9.0. While installing Mandrake
9.0 I have assigned to /boot a 10 MB space (/dev/hda7) and with the help of bootable
floppy in /etc I compiled lilo and then issued the command as dd if=/dev/hda7
of=bootsect.lnx count=1 bs=512 t
dear all,
At one of the PC I have installed win98/win2k/Mandrake 9.0. While installing Mandrake
9.0 I have assigned to /boot a 10 MB space (/dev/hda7) and with the help of bootable
floppy in /etc I compiled lilo and then issued the command as dd if=/dev/hda7
of=bootsect.lnx count=1 bs=512 the
Hello guys,
I have installed RH 8.0 on a HCL PC. While booting and coming at the stage of
Starting mail it takes approx. 3-4 minutes and then proceeds ahead. Pl. guide
where is the problem. I shall be thankful to you.
Best Regards,
MALKIAT
[EMAIL PROTECTED]
Hello guys,
Please guide how I can insert the following lines in a shell programming and then
execute them thr this shell as now I have to enter it in a sequence to run my TV tuner
to watch TV :
$ su
$ passwd :
# modprobe bttv
# xawtv
Also again I want to assign a hot key to this shell scr
Hello guys,
Please guide how I can insert the following lines in a shell programming and then
execute them thr this shell as now I have to enter it in a sequence to run my TV tuner
to watch TV :
$ su
$ passwd :
# modprobe bttv
# xawtv
Also again I want to assign a hot key to this shell scr
Dear guys,
I shall be grateful to you if anyone of you could provide me the valuable guidance
about the compilation of kernal as I need it for installation of a stable bttv version
for my tv tuner card. As I have never compiled a kernel earlier and my system is
consisting very crucial data due
Hello Sahil,
1.try to find if the card is detected properly from the
/etc/sysconfig/hwconf
Let me know what is procedure of detection in this directory
---
and check if a grabber is available
(lspci also can be helpful)
ok
2.bttv mod is insert
. But I have
issued the chown 644 * command in all these respective paths and the problem is not
solved.
Regards
have u checked the permissions and owner of the file??
On Wed, 2003-12-17 at 09:48, MALKIAT BENIPAL wrote:
> Dear guys,
>
> While I was working in linux (Mandrake 9.0) sudde
Dear all,
While I was working in linux (Mandrake 9.0) suddenly there was a power fluctuation due
to loose connection of cables between my PC and my UPS sockets. With the result the PC
rebooted.
Now when I login in my user and use vi editor to open a new file or save an existing
file after w
Dear guys,
While I was working in linux (Mandrake 9.0) suddenly there was a power fluctuation due
to loose connection of cables between my PC and my UPS sockets. With the result the PC
rebooted.
Now when I login in my user and use vi editor to open a new file or save an existing
file after
MALKIAT BENIPAL <[EMAIL PROTECTED]> wrote:Date: Mon, 15 Dec 2003 21:36:53 -0800 (PST)
From: MALKIAT BENIPAL
To: [EMAIL PROTECTED]
Subject: [ilugd] file permission problem
Dear all,
While I was working in linux (Mandrake 9.0) suddenly there was a power fluctuation due
to loose connect
Sahil Aggarwal <[EMAIL PROTECTED]> wrote:
i've faced similar problem..but on redhat 8.0
1. cross check if the card is working on other operating system.
2. card is detected properly
(/etc/sysconfig/hwconf can tell you about your card.Mandrake 9.0 has
kudzu???)
3. if card is supported by xawtv
Dear all,
While I was working in linux (Mandrake 9.0) suddenly there was a power fluctuation due
to loose connection of cables between my PC and my UPS sockets. With the result the PC
rebooted. Now when I login in my user and use vi editor to open a new file or save an
existing file after work
Dear guys, I am using Mandrake 9.0. Recently I purchased a tv tuner card make Intex
(Bt878 chipset). Whenever I try to run the command xawtv from a console to play the
tv, I get the following error message thereby I am not able to watch the tv programs :
$ xawtvthis is xawtv-3.76 running on l
Dear guys,
I am using Mandrake 9.0. Recently I purchased a tv tuner card make Intex (Bt878
chipset). Whenever I try to run the command xawtv from a console to play the tv, I get
the following error message thereby I am not able to watch the tv programs :
$ xawtvthis is xawtv-3.76 running on l
Dear guys, I am using Mandrake 9.0. Recently I purchased a tv tuner card make Intex
(Bt878 chipset). Whenever I try to run the command xawtv from a console to play the
tv, I get the following error message thereby I am not able to watch the tv programs :
$ xawtvthis is xawtv-3.76 running on
Dear guys, I am using Mandrake 9.0. Recently I purchased a tv tuner card make Intex
(Bt878 chipset). Whenever I try to run the command xawtv from a console to play the
tv, I get the following error message thereby I am not able to watch the tv programs :
$ xawtvthis is xawtv-3.76 running on lin
Dear guys,
I am using Mandrake 9.0. Recently I purchased a tv tuner card make Intex (Bt878
chipset). Whenever I try to run the command xawtv from a console to play the tv, I
get the following error message thereby I am not able to watch the tv programs :
$ xawtv
this is xawtv-3.76 running on
Dear guys,
I am using Mandrake 9.0. Recently I purchased a tv tuner card make Intex (Bt878
chipset). Whenever I try to run the command xawtv from a console to play the tv, I get
the following error message thereby I am not able to watch the tv programs :
$ xawtv
this is xawtv-3.76 running on
Dear guys,
I am using Mandrake 9.0 and I want to know how I can run my TV tuner card make Intex
using Mandrake. Pl.guide and oblige.
Best regards,
MALKIAT
[EMAIL PROTECTED]
-
Do you Yahoo!?
Protect your identity with Yahoo! Mail AddressGuard
Dear Virdi Saheb,
Try using Xine player (I got with Mandrake 9.0) with the help of which you could
easily capture a particular scene of a movie. If using RH 9.0 you could down load the
relevant RPM of xine player and then install it.
best regards,
malkiat
Jasmeet <[EMAIL PROTECTED]> wrot
Dear all,
On the auspicious occasion of the birthday of Sh.Guru Nanak Dev Ji, I wish to convey
you all my heartiest congratulations !!
Best Regards,
Malkiat
MALKIAT
[EMAIL PROTECTED]
-
Do you Yahoo!?
Protect your identity with Yahoo! Mail AddressGuard
__
dear all,
I wish to purchase a tv tuner card compatible for linux (RH, Mandrake 9.0). I need the
advise of your guys of ILUGD using linux that which tv tuner card I should opt for. It
should be good in quality as well as competitive in price too.
looking forward your reply,
best regards,
ma
dear all,
I wish to purchase a tv tuner card compatible for linux (RH, Mandrake 9.0). I need the
advise of your guys of ILUGD using linux that which tv tuner card I should opt for. It
should be good in quality as well as competitive in price too.
looking forward your reply,
best regards,
ma
Dear all,
You all will be aware that Reliance has extended the facility of surfing net thr its
mobile service to its customers. I have got a CD and upon checking the same I observed
that there are drivers for win98, win2k and xp but not for linux.
I would like to know if there is any possibi
Dear all,
I have samsung CDROM and CD writer. While using X-CD-Roast in KDE my Read Device shows
the name of my CD writer (as well as in all options ie. writing, verifying etc) and
when I try to assign it the read device as my CDROM and click on the option to choose
read device, the pointer sig
Dear all,
I have samsung CDROM and CD writer. While using X-CDRoast in KDE my Read Device shows
the name of my CD writer (as well as in all options ie. writing, verifying etc) and
when I try to assign it the read device as my CDROM and click on the option to choose
read device, the pointer si
The idea of maintaining FAQ is good indeed and should be implemented immediately, if
not. The relevant link should be brought to the notice of all the ILUGD members
enabling them in trouble shotting their day to day linux problems. Needless to say, it
will lessen the burdent of repetititon of un
dear all,
To check the path of my home directory I issue the env command. I wish to specify a
path as /usr/share/local/figlet which is not in the path of my home directory. Please
help me in which file I should specify this path. I checked the profile and rc.local
file of /etc but did not get
Dear Amit Ji,
Is Mcafee antivirus for linux is freely available for download ? if so, pl. give me
the relevant URL and oblige.
malkiat
amit sharma <[EMAIL PROTECTED]> wrote:
lookout for Mcafee Antivirus for linux.
amit
--- MALKIAT BENIPAL wrote:
> dear all,
>
> Please le
dear all,
Please let me know about a good anti virus for linux that is freely available for
download. I will be thankful to you.
MALKIAT
[EMAIL PROTECTED]
-
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
hello,
could you pl. tell me any freely available anti virus for linux.
regards,
malkiat
linuxlingam <[EMAIL PROTECTED]> wrote:
dear all,
i have several user accounts under RH8.
after a user logs in, it is important to launch firestarter.
doing so requires the root password.
so i figured i m
Hi sahin,
you may download it from www.winehq.com
malkiat
[EMAIL PROTECTED] wrote:
can someone please send me wine
--
sachin jain
___
ilugd mailing list
[EMAIL PROTECTED]
http://frodo.hserus.net/mailman/listinfo/ilugd
MALKIAT
[EMAIL PROTECTED]
"mujhe lagta ab ILUGD din par din uphaas ka patr banti ja rahi hai"
what is this ...!!!
malkiat
"Sanjeev \"Ghane\" Gupta" <[EMAIL PROTECTED]> wrote:
On Wednesday, September 10, 2003 1:53 PM [GMT+0800],
Sumil Saxena wrote:
> Hi every one in delhi
>
> i have joined this list today
>
> SK
S
You are advised to go to the webpage of the manufacturers ie. Realtek and I am sure
there is a driver for linux for Realtek lancard. Download it and install it.
Hope this helps
malkiat
kalyan kondurie <[EMAIL PROTECTED]> wrote:
hi all,
My system has dual booting to Winxp and Redhat 8.0. I hav
Hi folks,
When I issue the command as wine c:\\progra~1\\musicm~1\\musicm~1\mmjb.exe, it gives
the error as :
Invalid path 'C:\\system' for system directory : does not exist. Perhaps you have not
properly edited or created your wine configuration file. This is (supposed to be)
'/home/malkiat
Hi folks,
When I issue the command as wine c:\\progra~1\\musicm~1\\musicm~1\mmjb.exe, it gives
the error as :
Invalid path 'C:\\system' for system directory : does not exist. Perhaps you have not
properly edited or created your wine configuration file. This is (supposed to be)
'/home/malkiat
table location can
be found easily. but those groups which don't have super block and
group descriptor block there is no general formula.
please help me out
thanx
bye
On Wed, 03 Sep 2003 MALKIAT BENIPAL wrote :
>Hello guys,
>
>I have learnt that wine provides both a development too
Hello guys,
I have learnt that wine provides both a development toolkit (Winelib) for porting
windows sources to Unix and a program loader, allowing many unmodified windows
binaries to run on x86-based Unix, including Linux, FreeBSD and solaris. Since I have
never used it earlier and I have do
dear all,
I have downloaded a file namely install-mmjb1.43.sh for playing mp3 files from tucows
linux system and utility software site. I want to know how I should install it. Should
I install it simply issuing command as sh . Please guide me.
Thanks in advance,
malkiat
MALKIAT
[E
dear all,
I am using mandrake 9.0. in my account, in graphics mode I have selected my desktop as
KDE but when I login in text mode in the same user and issue startx, it goes to GNOME
desktop...!! why it is so, please guide. switchdesk feature is not supported in
Mandrake.
malkiat
MALKIAT
dear all,
I downloaded the rpm pkg of real player and installed it in my Mandrake linux box. It
is installed without any problem. After installation, for the first time, making some
changes in 'Preference' option of it, I am able to get the sound of its sample sound
file. But when I close the
Hi,
See Contorl Centre/Control Manager for all your problems.
malkiat
KRIPLANI SANDEEP <[EMAIL PROTECTED]> wrote:
Dear Friends,
I am a new user of Mandrake 9.0. THe problem which i am facing is that I
do not find my hard disk partitions on the desktop, although the floppy and
CD ROM are pr
Hi,
I have visited the given links and tried to download the image of multi bootable
system. But the file is of huge size ie. of 576 MB and the speed of my net is not
efficient to download such a huge file. Could u pl. tell me if the the CD in question
can be obtained from any source by payin
Ok Mr.Raj, I agree that I may use knoppix as the rescue disk, but to compile the
lilo.conf file we need super user mode. Pl. guide how a super user mode is activated
using a knoppix disk.
regards,
malkiat
people just use knoppix as the rescue disk. all the tools you'll need are
already on
dear all,
I wish to make to bootable CD-ROM of linux as I believe that a floppy is not a
trustworthy media in case of any trouble in linux booting from Hard disk. So pl. help
me in providing yr guidance how I may make a linux bootable CD-ROM using X-Roast.
thanks in advance
MALKIAT
[EMA
Go for media player for linux and is quite compatible for RH 8.0.
If u need it I may send you the relevant files to your personal email account for
installating it at your end. pl. revert back.
cheers !!
malkiat
sarvex jatasra <[EMAIL PROTECTED]> wrote:
hi all,
i used xine for watching VCDs
dear all,
While logging to my user account in Graphics mode, I have selected the
environment as KDE desktop but after chanding the /etc/inittab from
level 5 to level 3 for switching over in text mode when I enter my
username and passwd in text mode and issue the command as startx I go to the
G
MALKIAT BENIPAL <[EMAIL PROTECTED]> wrote:Date: Thu, 21 Aug 2003 22:56:05 -0700 (PDT)
From: MALKIAT BENIPAL
Subject: [ilugd] some queries & help - Mandrake 9.0
To: [EMAIL PROTECTED]
dear all,
While logging to my user account in Graphics mode, I have selected the
environment as K
dear all,
While logging to my user account in Graphics mode, I have selected the
environment as KDE desktop but after chanding the /etc/inittab from
level 5 to level 3 for switching over in text mode when I enter my
username and passwd in text mode and issue the command as startx I go to the
G
dear all,
While logging to my user account in Graphics mode, I have selected the
environment as KDE desktop but after chanding the /etc/inittab from
level 5 to level 3 for switching over in text mode when I enter my
username and passwd in text mode and issue the command as startx I go to the
dear all,
While logging to my user account in Graphics mode, I have selected the environment as
KDE desktop but after chanding the /etc/inittab from level 5 to level 3 for switching
over in text mode when I enter my username and passwd in text mode and issue the
command as startx I go to the G
There is a command in linux . I don't remember now. Pl. help me what is it.
Whenever we type a word after this command the whole screen will be cleared and then
the word will be printed on the whole screen containing ' * ' or ' # ' signs. eg. let
us assume :
banner malkiat
Now on the
what is this ELX and LFY stands for ? pl. give the full initials of the same.
Arjun Asthana <[EMAIL PROTECTED]> wrote:
ELX is your answer. You can buy LFY May or ask Mr. Abishek or me (I've got
13 and can give you free)
> Bharat Gautam
> [EMAIL PROTECTED]
> H.no-1168,sector-16,
> faridabad-121
Is ILUGD meant only for the purpose of "baat ka batangar" . Are bhai raat gayi
baat gayi. If you have a solution for my problem then pl. let me know why wasting
yours and mine precious time.
malkiat
Robins Tharakan <[EMAIL PROTECTED]> wrote:
:D
LOL
rbs
On Mon, 2003-08-18 at 18:32,
Dear all,
pl. let me know what is the shell command in linux to view the contents of a file
created using a cobol or 'C' compiler.
thanks in advance,
malkiat
MALKIAT S. BENIPAL
-
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design softwar
Hi,
try to make a new dial up connection in kppp and then try this out. Hope this works.
malkiat
Narsingh Sahu <[EMAIL PROTECTED]> wrote:
Hello everybody,
Last night while I was browsing the Net, my PC
rebooted due to a power problem. Thereafter, kppp
failed to connect to the Net saying "unable
apologise if it hurts you. Hope you wud understand.
best regards,
malkiat
Raj Mathur <[EMAIL PROTECTED]> wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
>>>>> "Malkiat" == MALKIAT BENIPAL writes:
Malkiat> [snip]
Malkiat> Everything was made clear in my m
dear all,
I am using tinycobol-0.60 (http://tinycobol.org) which is linux based. To see the
contents of some of the data files created thr.cobol programs when I use cnv it says bash : cnv : command not found. I would like to know what
is substitute for cnv command in linux to view the content
Dear all,
I have two servers with me. One is running Unix SCO 5.5 server and another one is a
PC based, meant for providing internet connection sharing through dialup using samber
server to differnt PCs for net surfing and mail distribution purpose. The IP address
of SCO server is 100.0.0.1 a
dhanraj sheth <[EMAIL PROTECTED]> wrote:
dear M.B,
what is the OS in the PC having IP of 197.172.100.1
and clear my dout that what is the purpose of that pc
just internet sharer for the client and then what is
the the use of Sco server ? why Dont u use the Linux
OS to share internet with your cl
Hello Amit,
I use Mandrake 9.0. I have made two users. In one user I am using Gnome and in another
one KDE. For the last few days, whenever, I switchover to Gnome, it displays a
'ximian' windows which I think is a mail server. Pl. guide. how I can configure this.
Everytime I cancel it because
Dear all,
I have two servers with me. One is running Unix SCO 5.5 server and another one is a
PC based, meant for providing internet connection sharing through dialup using samber
server to differnt PCs for net surfing and mail distribution purpose. The IP address
of SCO server is 100.0.0.1 a
I have also some problem with linux-delhi.org. I updated my account and changed my
email address in order to get my furture mail over new account. But still I am getting
my mails relating to ILUGD on my old email-id given in my user account with ILUGD.
Dear Administrator, Pl. check where the pr
Dear MR.Ghosh,
Pl try this one :
grub -install /dev/hda
hope this works,
malkiat
Koushik Ghosh <[EMAIL PROTECTED]> wrote:
Hi all,
can you help me configuring the grub in multiple harddisk, I have two
one is 10GB(hdc) and another is 4GB(hda). I have Linux(RH 8) on the 4GB
harddisk (hda) and win
Dear all,
I use Mandrake 9.0. I want to convert MP3 song files into
CDA format and for this purpose I searched for some
downloadable softwares thr. google but I found that
most of them could only be purchased and trial version is there
that will help you in converting only 10 MP3
songs into CDA
ED]> wrote:
I got the same email from MALKIAT BENIPAL and he has been flagged as a
spammer I will not have to worry about him any more :).
Mithun
__
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://siteb
sir, i am having good knowledge about networking and oracle programming. If u need my
service then pl. revert.
kind regards,
malkiat
Ralph Doncaster <[EMAIL PROTECTED]> wrote:
I'm looking for a network administrator in India to work remotely for an
ISP I run in Canada. A reliable, low-latency i
if u need RH 9.0 CDs pl. send Rs.150/- in adv. at
malkiat sg. (EDP Deptt)
Oswal Woollen Mills Ltd.,
Sherpur, G.T.Rd.
Ludhiana-141003
its a pkg of 3 cds
regards
malkiat
chpant <[EMAIL PROTECTED]> wrote:
Hello Friends
I need RedHat 9.0 CDs. Can anyone Please tell from where I get it.
Regards
I use Mandrake 9.0. I tried to configure gnome's pppd dialer, it dials my ISP's no.
and when it tries to connect, it gives the error msg. as 'pppd daemon died
unexpectedly' what is meant by this msg. I have also taken recourse of help provided
by gnome's pppd dialer but of no avail. Can anybody
dear frinds,
I need a real player 8.0 or higher version for Mandrake 9.0. I visited the site
http://www.real.com for downloading it. Though it provides real player for various
linux versions but not particularly for Mandrake 9.0. Pl. suggest which version of
linux I should opt for downloading
dear frinds,
hope this finds u all in the best of yr health.
I use Mandrake 9.0. My problem is that my KDE's kppp dialer is working smoothly. But
while configuring my dial up connection thr. gnome pppd dialer, I receive the error
msg. as pppd daemon died unexpectedly... I get this msg. after
sir,
hope this will find u in the best of yr health.
pl. let me know how in Mandrake 9.0 or any other
version of linux how i can swtichover between tone
dialing and pulse dialing.
best regards,
malkiat
__
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per mont
dear all,
I use Mandrake 9.0. I am facing a peculiar problem on
account of user creation from root. Whenever, I try to
create a user it says "vipw lockfile (/etc/ptmp) is
present !" thereby not enabling me to create a user.
What do we mean by this msg and how I should handle
it, please guide.
Sec
Dear virdi saheb,
Hope, this will find you in the best of yr health &
good spirit.
Sir, as you know, I use Mandrake 9.0. I am facing a
peculiar problem on account of user creation from
root. Whenever, I try to create a user it says "vipw
lockfile (/etc/ptmp) is present !" thereby not
enabling me
dear all,
i use mandrake linux 9.0. Whenever,I try to create a
user from the root, I get the msg as "vipw lockfile
(/etc/ptmp) is present !", thereby not enabling me to
create a user. pl. guide me how I can overcome this
problem.
secondly, pl. let me know how I can create a user
without entering
Dear Nikhil,
Thank u so much for yr reply and guidance for the
above.
I would like to know whether in order to make the
motorola SM56 internal modem functional in Mandrake
9.0, is the compilation of kernel is necessary ? Won't
it work without compilation of the same. pl. guide
further.
All conc
Dear fellows,
One of my fellow has his mother board as VIA, RAM as
128 MB, HDD as 40GB, 52X CD ROM and I have installed
mandrake 9.0 on his system. Everything is ok with his
system viz. display, sound system etc. But while
playing some games eg. tuxracer and others, either the
sounds of the games
Dear all,
Upon requst of one of my fellow, I installed Mandrake
9.0 on his PC, having internal modem as Motorola.
Previously, I came to know from one of our fellow at
ILUGD that now we have driver (Motorola Modem
Internal) available for this and subsequently, I
downloaded the driver from the links
Dear all,
Hope, this will find you all in the best of everyone's
health.
I use Mandrake 9.0. I want to convert MP3 files into
CDA format and for this purpose I searched for some
downloadable softwares thr. google but I found that
most of them could only be purchased and as a sample
they will just
dear friends,
I am using mandrake 9.0.
I am quite comfortable to use linux at home but in the
recent past I noticed that It started taking a little
bit while booting which was not earlier.
so is there any expertise having knowledge about how I
can use tweaking tips to overcome this problem. In
the solution for your problem is already given in
ILUGD's web site. So go through the page of your
registration carefully and u would find a solution.
regards,
malkiat
> I have lost my username and password through
> which
> i registered with the group. Can anybody help me as
> it
> is eatin
1 - 100 of 101 matches
Mail list logo