[leaf-user] Bering uClibc

Hello LEAF World! I seem (hope not) to have found a problem with HTTP transfer in the uClibc release 2 of Bering. All has been working on Bering 1.2, so I decided to "upgrade" to uClibc. At first all seemed OK, then my wife wanted to access her on-line bank account. Although this starts with a co

[leaf-user] Bering uClibc

I have been using Bering 1.2 and tried to upgrade to uClibc on a floppy. Everything was ok except that whenever I tried to backup a package after making config changes, the floppy became unbootable. I tried this on 3 floppies and each time the floppy would reboot. Bering 1.2 did not do that. Any ex

[leaf-user] Bering uClibc

Hello all, I need to use Bering uClibc with floppy disk, is it can use for sharing dial up internet connection ?. Thank's ARIE --- This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170 Project Admins to receive an Apple iPod Mini

[leaf-user] Bering-uClibc

Hi guys, I'm running 3.0.2 Bering with the appropriate e1000.o module. How do I set this module so eth0 is set to full duplex auto negotiation off on boot? Cheers Ad - This SF.net email is sponsored by: Splunk Inc. Still gr

[leaf-user] Bering UclibC development

I know I have asked before, but I have lost all past emails and any links that were given to me in regard to this question. I have finally gotten to the point that I need to set up a Leaf Bering UclibC development environment. I have downloaded the root_woody_fs and UML kernel and have that worki

Re: [leaf-user] Bering uClibc

Hi Robert, Although this starts with a completely normal, public HTTP (NOT HTTPS) web page(http://www.spk-vs.de), no browser can display it (MSIE, Opera, Mozilla tested) no message is displayed, the browser just sits for ever trying to get the page. OK, switch back to Bering 1.2 with he same firew

AW: [leaf-user] Bering uClibc

- Von: Martin Hejl [mailto:[EMAIL PROTECTED] Gesendet: Mittwoch, 24. Dezember 2003 10:23 An: Robert & Sabine von Knobloch Cc: Leaf-User (E-Mail) Betreff: Re: [leaf-user] Bering uClibc Hi Robert, > Although this starts with a completely normal, public HTTP (NOT HTTPS) web > page(h

[leaf-user] Bering-uClibc Weblet

I was just wondering if anyone can tell me why I get an "error" (red light) when I access weblet. I cannot find any good documentation for weblet. Is there another tool I can use other than weblet to monitor my firewall? _ MSN Pre

Re: [leaf-user] Bering uClibc

Am Montag, 3. Mai 2004 20:25 schrieb Godfried Duodu: > I have been using Bering 1.2 and tried to upgrade to uClibc on a > floppy. > Everything was ok except that whenever I tried to backup a package > after making config changes, the floppy became unbootable. I tried this > on 3 floppies and each t

Re: [leaf-user] Bering uClibc

Askari wrote: Hello all, I need to use Bering uClibc with floppy disk, is it can use for sharing dial up internet connection ?. Thank's ARIE I recently used uClibc to make a dial out box (among other configurations) and everything will fit on a 1680 floppy. make the floppy using the image file.

[leaf-user] bering uClibc 2.2

Hello, I am trying to get bering uClibc 2.2 to work on an embedded board with an AMD x86 processor. it has a pc/104+ interface. I have the pcmcia.lrp and pcmod.lrp packages installed. When I load the pcmcia_core and i82092 modules and force ds modules, everything is fine. I then go to start

[leaf-user] Bering-uClibc: vim.lrp ???

Please, point me in the right direction. I have searched, and cannot find what I am looking for. I believe that I can use the Bering-uClibc ISO for my purposes; but, I really need a real vi[m]. What do you think? -- Best Regards, mds mds resource 877.596.8237 - Dare to fix things before they

[leaf-user] Bering-uClibc: qmail ???

I am very surprised that I cannot find qmail for Bering-uClibc. What am I missing? Can somebody, please, make a Bering-uClibc qmail.lrp ??? TIA -- Best Regards, mds mds resource 877.596.8237 - Dare to fix things before they break . . . - Our capacity for understanding is inversely proportiona

[leaf-user] Bering uClibc HA

Hi, can you give me some hints for a firewall/gateway HA solution based on two Bering uClibc 2.3 boxes. I've seen keepalived.lrp, but for connection state syncronisation I need also ct_sync kernel module from netfilter-ha project. Can I get somewhere this kernel module for Bering uClic 2.3? Has so

[leaf-user] bering uclibc 4.0

Hello all, Good day! I'm quite new in linux and in LEAF. What I'm trying to do is install the bering uclibc 4.0 to a harddisk. And truthfully I'm a little lost.. This is what I was able to do as of now.. -run the iso in a cd rom.. The problem is I don't know how to transfer the files to the HD

[leaf-user] Bering uClibc and wireless.lrp

Does anyone know where I could find wireless.lrp for bering uClibc? I'd rather not build it myself if I can avoid it :) Dan __ Dan Cardamoremailto:[EMAIL PROTECTED] http://www.hld.ca 13:19:03 up 2 da

[leaf-user] Bering+uClibc and keepalived

I am currently trying to get keepalived to run correctly but running into a small problem. I keep getting the error: Starting Keepalived v1.0.0 (06/01/2003) Configuration is using : 22095 Registering Kernel Netlink Reflector. VRRP_Instance(VI_1) provide at least one ip for the virtual server stop

RE: [leaf-user] Bering UclibC development

Hi, > I know I have asked before, but I have lost all past emails and any > links that were given to me in regard to this question. > > I have finally gotten to the point that I need to set up a Leaf Bering > UclibC development environment. I have downloaded the > root_woody_fs and > UML kernel

Re: [leaf-user] Bering UclibC development

Am Donnerstag, 21. August 2003 19:39 schrieb Charles Holbrook: > I know I have asked before, but I have lost all past emails and any > links that were given to me in regard to this question. > > I have finally gotten to the point that I need to set up a Leaf Bering > UclibC development environment.

RE: [leaf-user] Bering UclibC development

Hi At 09:06 22.08.2003 +0100, Luis.F.Correia wrote: ... The current uClibc development does not use UML. What is the minimal environment then for: a) Kernel compile Is it really different from the Bering standard kernel enviroonment? I always thought Kernels are library independent...? b) userl

Re: [leaf-user] Bering UclibC development

Am Freitag, 22. August 2003 13:51 schrieb Erich Titl: > Hi > > At 09:06 22.08.2003 +0100, Luis.F.Correia wrote: > >... > >The current uClibc development does not use UML. > > What is the minimal environment then for: > > a) Kernel compile > Is it really different from the Bering standard kernel env

Re: [leaf-user] Bering UclibC development

Hi kp Thanks for the info... At 01:41 23.08.2003 +0200, K.-P. Kirchdörfer wrote: Am Freitag, 22. August 2003 13:51 schrieb Erich Titl: . Anyway, what you are asking for is already available: Point you're browser to: http://www.uclibc.org/ look for "30 June March 2003, dev systems updated to u

RE: [leaf-user] Bering UclibC development

Erich, > Hi kp > > Thanks for the info... > > At 01:41 23.08.2003 +0200, K.-P. Kirchdörfer wrote: > >Am Freitag, 22. August 2003 13:51 schrieb Erich Titl: > >. > > > >Anyway, what you are asking for is already available: > >Point you're browser to: > >http://www.uclibc.org/ > >look for > >"3

Re: [leaf-user] Bering UclibC kernel

This whole thread was started because I want to use leaf-bering in another capacity. I am currently trying to get a kernel together that will work as an Load Balancer/HA server. http://www.linuxvirtualserver.org/whatis.html I am just curious if this is something that anyone else is interested in

[leaf-user] Bering-uClibc: pcmcia_orinico + dhcpd

I just upgraded my home LEAF/Bering 1.1 box to LEAF/Bering-uClibc 2.1rc1. I have three NICs: eth0 = smc-ultra connected to my DSL line eth1 = 3c509 connected to my LAN eth2 = Orinoco Gold I configured dhcpd to provide leases to clients on both eth1 (192.168.0.0/24) and eth2 (192.168.1.0/24), but

[leaf-user] Bering-uClibc Module.dep question

There is no /lib/modules/2.4.24/kernel/drivers/net/ directory, do I need to create a directory for this 8390.o module? Module.dep file included with Bering-uClibc 2.1: /lib/modules/2.4.24/pcmcia/pcnet_cs.o: /lib/modules/2.4.24/kernel/drivers/net/8390.o \ /lib/modules/2.4.24/pcm

Re: [leaf-user] Bering-uClibc Weblet

It depends on which of the three traffic light graphics is red. If it's the Firewall light, this means there is probably a bunch of traffic that your firewall has rejected. If you want to see the traffic that is being dropped, click on the "shorewall.log" link on the page that tells you there's

[leaf-user] Bering-uClibc Virtual environment

Does there exist, or is there a need to build a virtual environment similar to that of the Bering virtual environment? I read through the documentation of the Bering-uClibc environment, and it seems to work OK, but my intent was to compile a module. I ended up modifying the Makefile of the driver

[leaf-user] Bering-uClibc 2.1.3 Question

Hi, Some Newbie questions: 1. TZ I live in Hong Kong (GMT+8), so I set the TZ to : HKG+8 How come the system show incorrect date/time w/ cmos clock? # date Tue Jul 6 03:50:21 HKG 2004 # hwclock Tue Jul 6 11:50:18 2004 0.00 seconds 2. PS1 It is possible to set PS1, so that it show current fo

[leaf-user] Bering uClibc isdnlog package?

Hello! Does anybody know anyone who has already built a package containig isdnlog? I am trying to recycle my old hardware and this time I want a Bering-installation to log all my isdn traffic. :) Thank you! Frank --- SF.Net email is sponsore

[leaf-user] Bering-uClibc ISO 2.2

If I do any insmods using the iso I get module not found messages. 2.0 would mount the cd to /cdmnt and point /lib/modules/2.4.22 to the modules directory of the cd. However 2.2 does not mount the cd to anything and links /lib/modules/2.4.26 to /lib/modules. I wanted to avoid manually coping

[leaf-user] Bering-uclibc + madwifi problem

Hi all leaf users, this is my first post to this mailing list. I have WRAP 2C (1x LAN, 2x miniPCI) board with wireless miniPCI card based on Atheros 5212 chip. I've compiled current cvs (2004-11-14) version of madwifi drivers (http://madwifi.sourceforge.net/) against actual Bering-uclibc 2.2.2 k

[leaf-user] Bering uClibc and GRUB

Hi List, I have been running Bering 1.2 from CF using GRUB as a boot loader for a while now. I decided to try Bering uClibc 2.2 on the same system. I tried to use the same GRUB configuration for uClibc as I did for 1.2, but that did not work. Bering never loaded the RAM drive. I noticed a diff

[leaf-user] Bering uClibc and GRUB

Hi List, Sorry I bothered you. I finally saw the error and fixed it. uClibC now boots properly. Best Regards, Roger McClurg [EMAIL PROTECTED] --- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of I

[leaf-user] Bering uClibc telnet client

Can anyone provide me with a telnet client for Bering uClibc? I need to temporarily connect to a legacy system via telnet, and would like to use a Bering uClibc floppy in an aging workstation to do this. Thanks! Scott --- SF email is sponsor

[leaf-user] bering-uclibc madwifi driver

I had problem to get madwifi working under bering-uclibc some time ago. Then I've solved it and now I see some people may also need it so I've made it publicly available at my web server: http://dush.nofuture.cz/linux/bering-uclibc/madwifi/ Now if you want to build madwifi yourself the only thing

[leaf-user] Bering uClibc and MRTG

I upgraded one of my machines from Bering 1.2 to Bering uClibc 2.2.2. Netsnmpd is up and running. Snmpwalk from my MRTG server returns data, but MRTG can't get the data from the ethernet interfaces as it did on the previous machines. Does anyone know what needs to be changed to get MRTG to wor

[leaf-user] Bering uClibc pptpd problem

Hello list! This is a happy Bering 1.1 user that feels that the time has come to upgrade... So I am setting up a new Bering uClibc 2.2.3 box. The Bering 1.1 box has a working pptpd (poptop) and I can connect from a Windows computer to it. When I duplicate the settings on the Bering uClibc 2.2.3 bo

Re: [leaf-user] Bering-uClibc: vim.lrp ???

I use the testing/elvis. It's been ok for me. You can have the scripts to use it instead of the default editor. I don't recall where you set that but it talks about it in the install docs. gat Michael D Schleif wrote: Please, point me in the right direction. I have searched, and cannot find wh

Re: [leaf-user] Bering-uClibc: qmail ???

Hi Michael, I am very surprised that I cannot find qmail for Bering-uClibc. What am I missing? Can somebody, please, make a Bering-uClibc qmail.lrp ??? Short version is: read http://cr.yp.to/qmail/dist.html and tell us how we can provide a qmail.lrp that complies to the qmail license (and no, I ha

[leaf-user] Bering-uClibc: shorewall philosophy ???

As you will know, I am new to Bering-uClibc, and I am also new to Shorewall. I notice that Bering-uClibc uses Shorewall v2.0.15, and according to the current stable release is v2.2.2. I am curious about three (3) things: [1] How often is Shorewall updated in Bering-uClibc,

[leaf-user] Bering uclibc: Mac verification

Hi, i just wanted to enable the mac verification in shorewall, but i can't seem to find the kernel module ipt_mac.o, which enables the mac support. I looked in modules.lrp and in the modules_2.4.26.tar.gz package, but only found the one for ipv6. Now how do i enable that feature in bering? By the

[leaf-user] Bering uClibc 2.3 & mhttpd

Just installed Bering uClibc 2.3 with mini_httpd (mhttpd). While trying to access the mhttpd server (i.e. http://192.168.1.254), the browser askes for a username and password? Does anyone know what would the default username and password be? Thanks! --

[leaf-user] Bering-uClibc-2.3 files

Is the final 2.3 released? On the download link (http://sourceforge.net/project/showfiles.php?group_id=13751&package_id=67534) I see the images released on Oct 16 (when mounted ISO, the files inside are Oct 15), whereas a lot of core packages are released Oct 23 (http://leaf.sourceforge.net/ber

Re: [leaf-user] Bering uClibc HA

Hi Markus, > can you give me some hints for a firewall/gateway HA solution based on > two Bering uClibc 2.3 boxes. I've seen keepalived.lrp, but for > connection state syncronisation I need also ct_sync kernel module from > netfilter-ha project. Can I get somewhere this kernel module for Bering

Re: [leaf-user] Bering uClibc HA

On Fri, 2005-11-11 at 08:17 +0100, Markus Koelle wrote: > Hi, > Hi Markus, > can you give me some hints for a firewall/gateway HA solution based on > two Bering uClibc 2.3 boxes. I've seen keepalived.lrp, but for > connection state syncronisation I need also ct_sync kernel module from > netfilte

[leaf-user] Bering UClibc 2.3.1 problems

I'm still struggling with Bering UClibc 2.3.1. There are long gouges down the learning curve where I've dug my nails in, but slipped back! I've not got a fancy set-up: a cable modem to the net, the firewall, switch to a windows machine and occasional laptop. I would have thought that (as with Da

[leaf-user] Bering UClibc Packages Updates

Does anyone have a failsafe system of updating existing packages on their Bering boxes with new lrp files without doing a wholesale system update? Thanks. Godfried --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log file

[leaf-user] bering uclibc package request

Hi, I've downloaded Bering-uClibc 2.3 for use in a lab and gotten the basics configured (took me a while to remember everything, but this is still just as cool as ever :). Anyway, there seems to be no dhcrelay package for this distribution, and I need one. I've found a dhcrelay for glibc 2.0

[leaf-user] Bering-uClibc, shorewall multiISP

Hello, I would like to know if using multiISP feature ( http://www.shorewall.net/MultiISP.html ) is possible with Bering, due to fact that it is still using 2.4 kernel? I would especially like to hear from people who have such setup running. I am planning on installing bering-uclibc on soekris 480

[leaf-user] Bering uClibc help requested

I've been using Dachstein on the system described in the attachment for 4 years. Kudos are due to all the participating developers in the LEAF effort! I am attempting to get Bering uClibc running from a floppy on this system with an eye to eventually upgrading the hardware and using a CD or hard

[leaf-user] Bering-uClibc 3.0 beta3

The Bering-uClibc team releases the third beta version of the upcoming Bering-uClibc 3.0. See http://leaf.sourceforge.net/bering-uclibc/index.php?module=announce&ANN_user_op=view&ANN_id=37 thx kp (note: the usb image may be available one day or two later)

[leaf-user] Bering-uClibc and kernel

Hi, where can i find all the patch applied to the Bering-uClibc 3.0.1 ? Is grsecurity patch is applied ? If not, where i can find a VERY secure kernel with grsec patch ? Regards Franck -- http://www.linuxpourtous.com - Us

[leaf-user] Bering UclibC laptop configuration?

I'm trying to get a laptop running with 3.1-beta1. I've got a couple of Xircom pcmcia cards in it. The cards get configured OK and get allocated to eth0 and eth1, but I can't seem to get a route to the outside world - eth0 doesn't aquire an address from my ISP. Also, eth1 doesn't get allocate

[leaf-user] Bering UclibC Laptop Configuration?

I posted this earlier last year, but never got any responses. I'd still like to get Leaf running on an old laptop, so I don't have the desktop Leaf roaring away under the desk! I'm trying to get a laptop running with 3.1-beta1. I've got a couple of Xircom pcmcia cards in it. The cards get configur

Re: [leaf-user] bering uclibc 4.0

19.01.2011 19:10, kenneth joachim llanto пишет: > Hello all, > > Good day! > > I'm quite new in linux and in LEAF. > > What I'm trying to do is install the bering uclibc 4.0 to a > harddisk. And truthfully I'm a little lost.. > > This is what I was able to do as of now.. > -run the iso in a cd rom.

Re: [leaf-user] Bering uClibc and wireless.lrp

> Does anyone know where I could find wireless.lrp for bering uClibc? I'd > rather not build it myself if I can avoid it :) > > Dan Dan, I just compiled and made wireless.lrp and wireutil.lrp. If it's possible I can mail them to you. (I will also put them in the Leaf CVS repository). Beware,

RE: [leaf-user] Bering+uClibc and keepalived

Hi Charles, > I am currently trying to get keepalived to run correctly but > running into a > small problem. I keep getting the error: > Starting Keepalived v1.0.0 (06/01/2003) > Configuration is using : 22095 > Registering Kernel Netlink Reflector. > VRRP_Instance(VI_1) provide at least one ip

Re: [leaf-user] Bering-uClibc: pcmcia_orinico + dhcpd

Scott At 22:57 19.01.2004 -0500, Scott Merrill wrote: >I just upgraded my home LEAF/Bering 1.1 box to LEAF/Bering-uClibc >2.1rc1. I have three NICs: >eth0 = smc-ultra connected to my DSL line >eth1 = 3c509 connected to my LAN >eth2 = Orinoco Gold > >I configured dhcpd to provide leases to clients

Re: [leaf-user] Bering-uClibc: pcmcia_orinico + dhcpd

3:57 AM Subject: [leaf-user] Bering-uClibc: pcmcia_orinico + dhcpd > I just upgraded my home LEAF/Bering 1.1 box to LEAF/Bering-uClibc > 2.1rc1. I have three NICs: > eth0 = smc-ultra connected to my DSL line > eth1 = 3c509 connected to my LAN > eth2 = Orinoco Gold > > I confi

Subject: [leaf-user] Bering-uClibc: pcmcia_orinico + dhcpd

Hi Scott The simlple solution: Iam not sure, if this work under uClib, but it should work under Bering 1.1: Just put the driver for the wlan-card to /boot/lib/modules and declare them in /boot/etc/modules (of course you must put/declare modules which are used by the wlan-modules here to). Now wla

Re: [leaf-user] Bering-uClibc: pcmcia_orinico + dhcpd

Thanks, everyone, for the suggestions! I'll give a few of these a whirl tonight, and report what I find. Erich Titl wrote: > I don't have neither pcmcia nor dhcp on my firewall anymore, the RCDLINKS > approach looks sensible to me. I'll try again, but that didn't work with regular LEAF/Bering.

Re: [leaf-user] Bering-uClibc: pcmcia_orinico + dhcpd

> Huy Bui wrote: > > Have you try the option: > > up svi dhcp restart (or up /etc/init.d/dhcpd restart) for eth2 in your net > > config > > I use this for my with Bering 1.2 > > Where, exactly, do I put this? > For my system I put this in the interfaces settings : /etc/network/interfaces iface et

Fw: [leaf-user] Bering-uClibc: pcmcia_orinico + dhcpd

Again, as I changed my e-mail -- Christian - Grenoble === Scott, I got a similar situation with my system which is a laptop with two PCMCIA Ethernet cards. To solve this race condition problem (initialisation of the PCMCIA cards not done before dhcp and other d

[leaf-user] Bering-uClibc 2.1 and PCMCIA

I have installed Bering-uClibc 2.1 on my P90 notebook with PCMCIA.lrp for: 3Com 3C589D D-Link DFE-670TXD I have placed module 3c589_cs.o and pcnet_cs.o in /lib/modules/pcmcia The lsmod command will indicate that all required modules are available except for pcnet_cs.o SYSLOG: Jan 30 17:04:

[leaf-user] Bering-uClibc 2.1 Module.dep question

In regards to the installation of D-Link DFE670TXD: I have placed all required modules in /lib/modules. The documentation is contrary. Have a look at this: http://leaf.sourceforge.net/doc/guide/bipack2.html#id2907004 "In order to have a working pcmcia package, you need to download in /lib/mod

Re: [leaf-user] Bering-uClibc Module.dep question

On Sun, 2004-02-01 at 12:08, joah moat wrote: > There is no /lib/modules/2.4.24/kernel/drivers/net/ directory, do I need to > create a directory for this 8390.o module? > > Module.dep file included with Bering-uClibc 2.1: > > /lib/modules/2.4.24/pcmcia/pcnet_cs.o: > > /lib/modules/2.4.

Re: [leaf-user] Bering-uClibc Virtual environment

Joey, For only kernel work you don't need a virtual environment. Compilation of the kernel is library independent, any modern distro will do for that kind of work. Hardcoding the kernel path is in that case the correct procedure. If you want to use a full virtual environment for not only kerne

[leaf-user] Bering-uClibc 2.1.3 Again - Traceroute

Thanks for answering Question 2, here come the new question: Does Bering provide traceroute like function? Regards, Chris Lee --- This SF.Net email sponsored by Black Hat Briefings & Training. Attend Black Hat Briefings & Training, Las Vegas Ju

[leaf-user] Bering-uClibc 2.1.3 / HDD - OpenVPNZ

Hi, I try to install OpenVPNz, but failed: I added 3 lib and openvpnz package to LRPKG.CFG file and reboot root,config,etc,local,modules,iptables,dhcpcd,keyboard,shorwall,ulogd,dnscac he,dropbear,weblet,libcrpto,libssl,liblzo,openvpnz When access Backup Menu, I can see new menu item (15,16,17,18

[leaf-user] Bering-uClibc 2.1.x - OpenVPNZ

Hi, Can anyone kindly to send an old version of OpenVPNZ package, as the one on the web seems broken. Many Thanks in advance. Regards, Chris Lee --- This SF.Net email sponsored by Black Hat Briefings & Training. Attend Black Hat Briefings &

[leaf-user] Bering uClibC 2.2.0b5 on Hdrive

Good Morning, I have a working floppy version of Bering 2.2.0b5 that I wanted to boot from my hard drive that originally had Bering 1.2. When the Bering box boots up I get the error message: " VFS: Cannot open root device "" or 03:02. Please append a correct "root=" boot option Kernel panic: VF

[leaf-user] Bering-uClibc 2.2 pcmcia support

Hi; you may have seen in the announce of Bering-uClibc a short note about pcmcia redesign - if you are interested in more information, you may read on what Eric Spakman wrote about it. With Bering-uClibc 2.2 the pcmcia subsystem has been redesigned. The biggest changes are that we switched to

Re: [leaf-user] Bering-uClibc ISO 2.2

p_conntrack_ftp ip_conntrack_irc ... ! umount Hope this helps. M Lu - Original Message - From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, August 24, 2004 10:28 PM Subject: [leaf-user] Bering-uClibc ISO 2.2 If I do any insmods using the iso I get module not found

[leaf-user] Bering-uClibc 2.2.2 Not avalible....?

http://prdownloads.sourceforge.net/leaf/Bering-uClibc_2.2.2_img_bering-uclib c-1680.exe?download I have tried to download it from every mirror and I keep getting "he mirror you've selected, "url" does not currently have the file you requested. (This is an error on our part which will be fixed)."

Re: [leaf-user] Bering uClibc and GRUB

Roger E McClurg wrote: Hi List, I have been running Bering 1.2 from CF using GRUB as a boot loader for a while now. I decided to try Bering uClibc 2.2 on the same system. I tried to use the same GRUB configuration for uClibc as I did for 1.2, but that did not work. Bering never loaded the RAM d

Re: [leaf-user] Bering uClibc telnet client

On Monday 29 November 2004 14:10, Scott Merrill wrote: > Can anyone provide me with a telnet client for Bering uClibc? I need to > temporarily connect to a legacy system via telnet, and would like to use a > Bering uClibc floppy in an aging workstation to do this. > > Thanks! > Scott > I'm using

Re: [leaf-user] Bering uClibc telnet client

On Monday 29 November 2004 16:31, you wrote: > > Could I get a copy of this, too? I would love to throw that on my USB > Thumbdrive... Sure. If there's enough interest, then perhaps it should be imported into the uClibc buildtree, but until then it I posted it here: http://www.tetrasec.net/dat

Re: [leaf-user] bering-uclibc madwifi driver

--- Pavel Dusanek <[EMAIL PROTECTED]> wrote: > I had problem to get madwifi working under > bering-uclibc some time ago. Thanks for supplying the driver! I have been meaning to build it for some time now How did you fix the problems you had? ajc ___

Re: [leaf-user] Bering uClibc and GRUB

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Roger E McClurg <[EMAIL PROTECTED]> writes: > My grub.conf file looks like this: > color red/blue yellow/blue > root (hd0,0) > timeout 5 > default 0 > > # For booting LEAF > title LEAF Bering uClibc Version 2.2 > kernel BOOT_IMAGE=/linux init=/linuxr

Re: [leaf-user] Bering uClibc and MRTG

On Tue, 2005-01-25 at 19:04 -0500, Roger McClurg wrote: > I upgraded one of my machines from Bering 1.2 to Bering uClibc 2.2.2. > Netsnmpd is up and running. Snmpwalk from my MRTG server returns data, > but MRTG can't get the data from the ethernet interfaces as it did on > the previous machine

[leaf-user] Bering-uClibc: development environment assistance ???

As you will know, I am new to Bering-uClibc. There are two (2) programs that I want to build, and I am not confident in my understanding of the documentation that I have found and read. Please, will somebody give me a clue as to how to make the following? qmail.lrp vim.lrp TIA -- Best

Re: [leaf-user] Bering-uClibc: shorewall philosophy ???

Michael; you can always download shorewall-[version].lrp from shorewall mirrors to use and test the latest and greatest. Note that shorewall 2.0.15 has been released in January - so it's not that old one might think looking only at the version numbers. kp Am Dienstag, 22. März 2005 07:40 schr

Re: [leaf-user] Bering-uClibc: shorewall philosophy ???

kp => Again, please understand, I am new to Bering-uClibc, and to Shorewall. * "K.-P. Kirchdörfer" <[EMAIL PROTECTED]> [2005:03:22:08:26:22+0100] scribed: > Michael; > > you can always download shorewall-[version].lrp from shorewall mirrors > to use and test the latest and greatest. O, so Shor

Re: [leaf-user] Bering-uClibc: shorewall philosophy ???

Am Dienstag, 22. März 2005 08:43 schrieb Michael D Schleif: > kp => > > Again, please understand, I am new to Bering-uClibc, and to > Shorewall. > > * "K.-P. Kirchdörfer" <[EMAIL PROTECTED]> [2005:03:22:08:26:22+0100] scribed: > > Michael; > > > > you can always download shorewall-[version].lrp fr

RE: [leaf-user] Bering uclibc: Mac verification

Mike, The ipt_mac option is compiled in the kernel, so no need to load it. Eric > >i just wanted to enable the mac verification in shorewall, but i can't seem >to find the kernel module ipt_mac.o, which enables the mac support. >I looked in modules.lrp and in the modules_2.4.26.tar.gz package, bu

[leaf-user] Bering-uClibc packages in testing

Hi all; as you probably know there some packages in "testing" for Bering-uClibc: http://leaf.sourceforge.net/bering-uclibc/index.php?module=pagemaster&PAGE_user_op=view_page&PAGE_id=3&MMN_position=3:3#TESTING Those packages has been build by user request, provided without any further documentat

[leaf-user] Bering uClibc IPSEC VPN issues

We have been running a leaf firewall for about 3 years or more. Most of that time it has been a Bering 1.0 RCx of some kind (can't remember the exact release). We just upgraded to a new machine running Bering uClibc 2.3-rc1 from CF. I built this image using primarily the uClibc ISO image as my bas

Re: [leaf-user] Bering uClibc 2.3 & mhttpd

Am Mittwoch 19 Oktober 2005 14:12 schrieb kwon: > Just installed Bering uClibc 2.3 with mini_httpd (mhttpd). > While trying to access the mhttpd server (i.e. http://192.168.1.254), > the browser askes for a username and password? Does anyone know what > would the default username and password be? >

Re: [leaf-user] Bering-uClibc-2.3 files

Am Dienstag, 25. Oktober 2005 03:57 schrieb M Lu: > Is the final 2.3 released? On the download link > (http://sourceforge.net/project/showfiles.php?group_id=13751&package_id=675 >34) I see the images released on Oct 16 (when mounted ISO, the files inside > are Oct 15), whereas a lot of core package

Re: [leaf-user] Bering-uClibc-2.3 files

Hi KP, Thank you for the explanation and also for the final release. M Lu - Original Message - From: "KP Kirchdoerfer" <[EMAIL PROTECTED]> To: Sent: Tuesday, October 25, 2005 7:35 AM Subject: Re: [leaf-user] Bering-uClibc-2.3 files Well, different view's

[leaf-user] Bering UClibc 2.3.1 installation problem.

Having got Dachstein up and running OK, I thought I'd give the recently released Bering a try. I've got to the stage where the firewall gets allocated an IP by my ISP, and the firewall allocates an IP to my internal network machine. I can also ping my ISP and firewall from the internal machine.

Re: [leaf-user] Bering UClibc 2.3.1 problems

Jim, My Bering installs have always been pretty much out of the box as far as Shorewall rules. I really doubt your basic setup is in conflict with them. The first place I would look is at ip addressing. Are you using the firewall as a dhcp server? In the past this was a default. Now I think y

Re: [leaf-user] Bering UClibc 2.3.1 problems

Jim, My Bering installs have always been pretty much out of the box as far as Shorewall rules. I really doubt your basic setup is in conflict with them. The first place I would look is at ip addressing. Are you using the firewall as a dhcp server? In the past this was a default. Now I t

Re: [leaf-user] Bering UClibc 2.3.1 problems

Jim, Did you read the dnsmasq documentation in the Bering-uClibc section: http://leaf.sourceforge.net/doc/guide/bucu-dnsmasq.html I think the problem is that the provider's DNS servers are not passed to dnsmasq (read the section "Using dnsmasq with dhcpcd"). Eric > Jim, > > > My Bering instal

Re: [leaf-user] Bering UClibc 2.3.1 problems

Jim, Did you read the dnsmasq documentation in the Bering-uClibc section: http://leaf.sourceforge.net/doc/guide/bucu-dnsmasq.html I think the problem is that the provider's DNS servers are not passed to dnsmasq (read the section "Using dnsmasq with dhcpcd"). Eric Thanks Eric. I've l

Re: [leaf-user] Bering UClibc 2.3.1 problems

Hello Jim, > > Thanks Eric. > > > I've looked at the above guide but noticed that it instructs that the > resolv-file should point to /etc/dhcpc/resolv.conf. There isn't a dhcpc > directory in my /etc! Should I create one and add an empty resolv.conf > file in it? I tried pointing resolv-file=/etc/

Re: [leaf-user] Bering UClibc 2.3.1 problems

Thanks again, Eric > The etc/dhcpc/resolv.conf is only created when you use the dhcpcd package. > Because you didn't tell much about your setup I have to guess a bit: > -You have a dynamic ip-address from your provider: That's me!. My ISP assigns me a dynamic IP address. My firewall is connect

Re: [leaf-user] Bering UClibc 2.3.1 problems

Hello Jim, > It worked! But an oddity is that even though I uncommented the range of > IP addresses > to allocate starting at 192.168.1.1, my Win XP machine gets allocated > 192.168.1.65. > When I plug my Linux laptop in (with the Win XP machine still connected), > it gets 192.168.1.2. So why does

Re: [leaf-user] Bering UClibc 2.3.1 problems

> Whilst I can ssh into the firewall (very useful) I can't access it with a > browser. I've noticed that my syslog file has entries "cannot execute > /usr/sbin/sh-httpd: no such file > or directory". I guess that it ought to be mini-httpd that should be > called. I've tried starting mini-htt

  1   2   3   4   >