Re: Question on the Legacy's Z axis

I got my 1200 with the original Porter-Cable router. When the Z axis upgrade become available, I only remember how expensive it was. I never knew till now that it had issues (not a real surprise to me). What I did for my 1200 was install a Shop Fox D2893 Veneer Press Clamp to control my Z ax

Re: Video on Knob making

If I were to make star knobs on the Legacy, I think Curt's method would be the best way. The only difference is I might use a spiral rope bit instead of a cove bit or straight bit to round off all the edges a bit (might save some on sanding). With that being said, the Legacy (or lathe) are no

Re: blower

Good Morning all, Great idea Bill. Like you Bill, I have lots of Ryobi tools (same battery, lots of different tools) and am really happy with all Ryobi items except their super charger (junk). Its cool you have turned that tool into a multitasker (I love multitaskers) I have mentioned this be

Re: MMechanical problem with a LOM 1200 manual machine

Lubrication is your friend, easiest and quickest to try:>) I always try that first. Russ On Wednesday, December 11, 2019 at 8:55:43 AM UTC-6, Neale Duren wrote: > > In operation, I slide the carriage back and forth but encounter > resistance. When I reverse the direction, the carriage moves fr

Re: $500 Legacy on the marketplace

Mark, I just spent 2 years cutting up about 15 logs (up to 22" in diameter by 7' long) I had from cutting down 3 trees (Ash) in my yard. I did a video series about it ("logging in the burbs") on YouTube.. "Free" is not what comes to mind when I think back. If you have a bandsaw big enough (14

Re: dust removal

I like all these ideas (including mine :>). I really like the exploding glitter box. Instead of glitter, use sawdust (lots of walnut for the smell) mixed with glitter and an air balloon bomb, No camera or GPS needed. It could be made cheap enough and I wouldn't want it back anyway. When the

Re: dust removal

If you were as devious as Aussi (yes, I am), you could put a label on it with your congressman's (or a neighbor you dislike) address and no one will know it came from you. :>) On Thursday, November 21, 2019 at 7:10:54 AM UTC-6, Gavin wrote: > > Then they will either fly tip it some where, (trace

Re: dust removal

You are devious :>) Russ On Thursday, November 21, 2019 at 1:22:59 AM UTC-6, aussiman wrote: > > Never mind making all these fancy dust removal stuff just sweep it up and > do this (see attachment ) ha ha ha > > > > Bill > -- You received this message because you are subscribed to the Go

Re: 2006 Legacy 1200 New build

Aussi, You are right about needing to blow instead of vacuum some areas of the LOM. I didn't mention it earlier but my shop vac I installed overhead has the capability of moving the hose to a different connector and shop vac hose blows, so I can switch between blowing and sucking. It's very ha

Re: 2006 Legacy 1200 New build

was more worried about the > fine dust than the chips. > > I liked your video on adjusting the height of the lathe. The 1000 doesnt > seem to have the same cross bar to rest the lower structure. I'm going to > have to fix that or find an alternative solution. > > Thank

Re: 2006 Legacy 1200 New build

Mark, I have done multiple dust collection videos, if you haven't watched them. Collecting chips on the LOM is like herding cats. My idea about dust collection is let the chips fall where they may. By that I mean I would put a floor in the bottom of the LOM and sliding panels on the sides (&

Re: $500 Legacy on the marketplace

e a link to the chuck I bought below. Link: https://www.pennstateind.com/store/CUG3418CCX.html Russ Veinot On Sunday, November 17, 2019 at 9:18:21 AM UTC-6, Mark wrote: > > I'm in Cincinnati, but our HQ is in Commerce, so I get up there every > month or so. > > I have the tool

Re: Russ youtube channel

Hello to all, Any rumors of my demise are greatly exaggerated :>) I have turned my attention to YouTube (YT) but I still monitor this group from time to time. Thanks to Harvey for reaching out to me and bring my attention to my lack of participation here. Even though I have done more than 20 L

Re: Dust prevention idea

I built a over head cabinet with a fan and filter to give me a dust hood for fine dust collection. I use a clear shower curtain attached to the cabinet and goes around 3 sides of the machine and it does a good job of controlling the chips flying all over and the dust hood fan collects virtuall

Re: Legacy table riser

Hi everyone, I have been absent for a while so now i am playing reading catch up. 2 things: 1) I did a video on how i eliminated the factory riser method and use spacers. I can change the height of the bed accurately in under a minute now and i like this method. 2) if i wanted to use the mech

Re: Dead

Wake me up after the blizzard is over, I'm going back to bed :>) On Saturday, February 10, 2018 at 2:31:53 AM UTC-6, Richard Ellis wrote: > > Where is everyone? very quiet just lately, It is the same over > here in the U.K. no replies to my Woodchuck for sale Add. on a couple of > woodwo

Re: legacy

Roger, Sorry about opening old wounds, but as a successful business entrepreneur and a long term LOM owner I have faced the ups and down of the economy. The bad economy never stopped me or thousands of others. the reason for business failures are usually multiple. you mentioned one possible r

Re: The Candlestick Maker

Curt, If I remember right, you and lil twisted did a video showing that follower. I have always said that you need a dedicated spot for the LOM with access all the way around. I also agree that the template follower is better suited on the front of the machine. i did a video recently on using

Re: legacy

OK, I gotta put my 3 cents worth in here. first about Curt's observations (and thanks for that Curt). It would be nice to see more participation here but I am not surprised it isn't more active. Most people would rather watch from afar (my Youtuybe channel is the same way) and I understand th

Re: happy new year

Thanks for the honorable mention Bill :>) I'm big on making things multi-taskers. The only significant difference between the 1800 and the 1200 is the 2' in length. I think the shorter version fits in my small shop (720 sq ft) better. I always thought the 900 (at 4') was a great size for

Re: merry christmas

Harvey, That's close enough for coffee run :>) Russ On Sunday, December 24, 2017 at 2:06:04 PM UTC-6, aussiman wrote: > > Ho ho ho well its Christmas morning here now i hope Santa got me something > woodwork related, > > Merry Christmas to all from down under.hope you all have a great day when >

Re: merry christmas

Merry Xmas to all from Salem, WI. We got our white Xmas on the 24th, but didn't slow travel here. Russ On Sunday, December 24, 2017 at 2:06:04 PM UTC-6, aussiman wrote: > > Ho ho ho well its Christmas morning here now i hope Santa got me something > woodwork related, > > Merry Christmas to all

New LOM Video

You can see the new video on YouTube at: https://www.youtube.com/watch?v=fY7j27L9-Xo Legacy workstation part 6. When is a legacy mill no longer a legacy mill? watch the video and find out :>) All comments and idea are welcomed, Russ -- You received this message because you are subscribed to

LAST NEW Video

you can see this newest video at: https://www.youtube.com/watch?v=Pc57N_nYqi4 It's not about the LOM, so this will be my last announcement about any videos I make that are NOT about the LOM. in the future I will be announcing only new LOM videos on this forum. This video is a good tip about

Re: new video on on the legacy

out what might make it better. this what this format is all about. I hope it was as good for you as it was for me :>) Russ On Thursday, December 7, 2017 at 3:33:48 PM UTC-6, russ veinot wrote: > > you can see my newest video on youtube at: > https://www.youtube.com/watch?v=6g6wzIW1HvM

Re: The Candlestick Maker

Nice, how do you find all these wonderful videos ?? Russ On Saturday, December 9, 2017 at 9:55:34 AM UTC-6, Curt George wrote: > Hello Everyone. > I was looking for some info. on a project that I am working on, while > searching, I found this video. Watch and see what I found,( in the video,

Re: 16 point twist

that is strange. when i got mine all she did was copy it from a hard drive to a dvd and sent it to me. they must be out of dvd's :>) ask them if you can get a copy of it from someone else? also, there are places out there that for a fee, they can copy the vhs to dvd. no idea of cost but how

Re: 16 point twist

hi Jeff, I bought the DVD version of the training (2) disks from Legacy( in the last year). I assume they will sell it to you unless you are prone to yelling at anyone :>) I started with the VHS and I still watch them from time to time. They are worth the $20 that Legacy is asking (again, I

Re: new video on on the legacy

t of view adequately :>), If after using this idea for a while, I find it to not work as designed, I promise to let you know. Russ On Thursday, December 7, 2017 at 3:33:48 PM UTC-6, russ veinot wrote: > > you can see my newest video on youtube at: > https://www.youtube.com/watch?v=6g6

Re: new video on on the legacy

to check this out. I hope this puts your concerns to rest. thanks for the comments, Russ On Thursday, December 7, 2017 at 3:33:48 PM UTC-6, russ veinot wrote: > > you can see my newest video on youtube at: > https://www.youtube.com/watch?v=6g6wzIW1HvM > > it's about how to ind

new video on on the legacy

you can see my newest video on youtube at:https://www.youtube.com/watch?v=6g6wzIW1HvM it's about how to index and lock down the 4 jaw chuck to the head stock, just like the locking index hub. you can then use custom face plates for everything. all comments are welcome, Russ -- You received

Re: X axis for the Revo

Richard, how much travel on the x axis? Are you using acme thread? have you thought about using an Incra Fence system or similar system like I did for mine? one question, do you have to move it by hand now? Russ On Thursday, December 7, 2017 at 10:40:54 AM UTC-6, Richard Ellis wrote: > > Hi

New Video

I have another new video on Youtube at: https://www.youtube.com/watch?v=HXsDdNav0F8 if you liked my "ceiling" video, you should really like this one about better (and cheaper) lighting in the workshop. all comments are welcomed. Russ -- You received this message because you are subscribed to

Legacy Workstation Part 5

Just posted part 5 of the legacy workstation. it is at: https://www.youtube.com/watch?v=dzaofwIeuz4 it is fully functional, just some cosmetic details to go so this should be the last of this series unless someone wants to see a demo of the features :>) Also, update on what i might be working

Re: New Video

ing :>) 2. I am having a bad shop day (kinda like bad hair day ) 3. I've been feeling tired lately (for years) 4. the wife is on strike. Again, thanks for your observations and comments. Russ On Monday, December 4, 2017 at 6:14:57 PM UTC-6, russ veinot wrote: > >

New Video

I just made a new video on Youtube at: https://www.youtube.com/watch?v=5vSr4xCsNbo It's not about the legacy directly but if you like those you might like this one. It's about how to utilize the most used space in your shop, the ceiling. all comments are welcome. Russ -- You received this

Re: Revo Table

you never know what is going to happen when riding sidesaddle :>) i am interested in pictures also Russ On Friday, December 1, 2017 at 6:04:10 AM UTC-6, Richard Ellis wrote: > Well, today I slipped up again, I had made the table a few weeks ago and > put on a fence for routing rebates.etc. us

Re: NEW VIDEO on YOUTUBE

work well above a workbench too. thanks for the comments, Russ On Wednesday, November 29, 2017 at 4:03:00 PM UTC-6, russ veinot wrote: > > Part 4 of the legacy workstation is out.. stopped to show the features of >> the dedicated shop vac & blower system AND the Dust Hood

Re: New walking stick.

nice cane, you always seem to put out nice work, even the simple projects. i might have make one for me (getting old :>) On Wednesday, November 29, 2017 at 11:00:47 PM UTC-6, Curt George wrote: > > Hello > this is a new walking stick that I made for a gentleman. > > The wood is "Brazilian cher

NEW VIDEO on YOUTUBE

> > Part 4 of the legacy workstation is out.. stopped to show the features of > the dedicated shop vac & blower system AND the Dust Hood Fan is working. > it's working like a total workstation already. > > watch it at: https://www.youtube.com/watch?v=AnRvDnwPbaI > > > thanks for the interest

Re: Will the LOM become a collector's item?

As they say in the acting business, I think i just got upstaged :>) that was hilarious Bill. Russ On Monday, November 27, 2017 at 8:18:42 PM UTC-6, russ veinot wrote: > I was wondering today, how long do you think it will take before a legacy > will be considered a classic antique

Re: Will the LOM become a collector's item?

;t support the LOM anymore. Probably asking for too much. What does anyone else think? On Monday, November 27, 2017 at 8:18:42 PM UTC-6, russ veinot wrote: > I was wondering today, how long do you think it will take before a legacy > will be considered a classic antique and maybe even a co

Re: Will the LOM become a collector's item?

ther everyday tasks with it. my goal is to make it the most used machine in the shop. Russ On Monday, November 27, 2017 at 8:18:42 PM UTC-6, russ veinot wrote: > > I was wondering today, how long do you think it will take before a legacy > will be considered a classic antique and ma

Re: Will the LOM become a collector's item?

Actually, i was shocked Michael was willing to give it up at all. they are going to have to pry it from my cold dead fingers :>) Russ On Monday, November 27, 2017 at 8:18:42 PM UTC-6, russ veinot wrote: > > I was wondering today, how long do you think it will take before a legacy

Will the LOM become a collector's item?

I was wondering today, how long do you think it will take before a legacy will be considered a classic antique and maybe even a collector's item. in a hundred years maybe some will be proud to be able to go out to their garage and do all those amazing things without the use of a computer. In my

Re: Headstock coupling question

nice information gathering :>) you made my life easier. anyone know how much one is from Legacy? is it available? On Sunday, November 26, 2017 at 5:05:37 PM UTC-6, Joe Gassen wrote: > > Sorry to ask but I can’t find the answer. Some time back there was a > coupler discussed that would thread

Re: new legacy drive hubs

LiLtwisted, sometimes threads are just something else that can go wrong :>) so the lock collar holds even under high torque? Russ On Monday, November 20, 2017 at 2:58:20 PM UTC-6, aussiman wrote: > https://www.youtube.com/watch?v=W-X6miCWaPg&feature=em-uploademail > > > > hopefully some of

Re: new legacy drive hubs

e SS drive > spur as well as the 4 jaw chucks. > http://www.shopsmith.com/ownersite/catalog/dr_tailstock_chuckarbor.htm > I use this method for stock below 2-1/4 inch. Over that, there is too > much torque and the drive dogs are needed. > > Mike OK > > On 11/25/2017

Re: new legacy drive hubs

LiLtwisted, your chuck drives off the morse taper? what type of headstock do you have. you don't have a 1-8TPI shaft? Bill, well. . . i do hate typing:>) Russ On Monday, November 20, 2017 at 2:58:20 PM UTC-6, aussiman wrote: > https://www.youtube.com/watch?v=W-X6miCWaPg&feature=em-uploadema

Re: new legacy drive hubs

it's time for my input to the indexing hub vs the face plate. Michael Kratky asked the question why not a face plate? hear my opinion in my video on Youtube at https://www.youtube.com/watch?v=0zs2hIwtCAY I wanted to say it here but i couldn't say it all in 144 characters (too lazy to type th

Re: Question

i have had one for years. as to why, i see it as a replacement for a coping saw. if i didn't own a scroll saw and i would have to use the coping saw,i wouldn't do most of the projects i do now. i have never done a project solely using the scroll saw. i don't think i would have the patience it

New Video on Youtube

part 3 of the legacy workstation is out.. stopped to show the features of the dedicated shop vac & blower system. it's starting to feel like a workstation already. watch it at: https://www.youtube.com/watch?v=mdU5yqVrVCI thanks for the interest, all comments welcomed. russ -- You receive

** New Legacy Video **

I have a new video on YouTube at: https://www.youtube.com/watch?v=y3bGRBH62CQ this is part 2 of my Legacy Mill Workstation. I think my LOM deserves its own dedicated workstation with supporting accessories. stop by and see the progress and ideas of what is next. thanks for the words of encou

Re: A response from Andy Anderson Of Legacy Regarding Support.

ok, I have now cooled off even to give a civil response to Andy's clarification, as Curt said: "WHAT?!!?" I am one of the first few to join this forum (in the first month?). Art introduced me to it. I was told it was a forum for Legacy owners to share info. after joining, I noticed there we

Re: A response from Andy Anderson Of Legacy Regarding Support.

Curt, I was also one of the first members and I only remember LOM owners joining. all we were looking for was help to learn to use the LOM. there was the only resource help available during that period of time. I think someone has a very bad memory or vivid imagination. never was there any

RE: Purchasing LOM's

Very well said Curt. Kinda what I said the other day, most parts from Legacy are too much (for what it is). I see my LOM the same way as any other machine in my shop. I can make the machine better (add-on accessories and design changes) and if I need a part, I buy it when reasonably priced o

RE: A response from Andy Anderson Of Legacy Regarding Support.

Tim, please forward this to Andy, As a LOM owner for more than a decade, one of the first members of this group, and as a Youtube content provider about the LOM (makes me sound important, doesn’t it :>), I think I am entitled to an opinion without hiding behind “extension 11” or a third part

RE: New Member Intro

full compliment of accessories in 2005, I have used it for making chair spindles and legs. I thought the LOM was all but dead, then I ran across Russ Veinot youtube channel which perked my interest in it again. God Bless -- You received this message because you are subsc

RE: If you have not been watching ???

In my opinion (glad everybody asked :>), if I need a part, I call Legacy first. This leads to 2 possibilities, one they don’t have the part, two, they have it and it cost too much. Either scenario, I would take either with the same grain of salt. I have found that it is highly possible I will

RE: If you have not been watching ???

All I can say is “Good Riddance”. I haven’t looked to them for help for a long time. Now that they are gone, I still won’t be able to see any difference. Still I am glad they made this original machine. Otherwise, I probably would own a . . . ??!!? well I still like my LOM. Russ

RE: New video on youtube

tch enough chips. I think there has to be some kind of shroud made to ketch the chips as they are being cut. not after the router has thrown them across the room. ??? C.A.G. On Friday, November 10, 2017 8:02 PM, Russ Veinot wrote: Thanks Curt The thien baffle will collect 95% of th

RE: New video on youtube

those are the two big problems that I have with shop vac.'s... C.A.G. On Friday, November 10, 2017 4:55 PM, Russ Veinot wrote: !!!*** NEW VIDEO ***!!! My new video is now out at https://www.youtube.com/watch?v=Ii6Mj_RQaXw It’s about time I turned my LOM fro

New video on youtube

!!!*** NEW VIDEO ***!!! My new video is now out at https://www.youtube.com/watch?v=Ii6Mj_RQaXw It’s about time I turned my LOM from just a mill to a full blown workstation. This is part 1 about design and breakdown of all the components to the workstation. More videos to come.

RE: Rotary table

Richard, First, thanks for the words of encouragement. I think I understand your “ramblings” (I speak rambling fluently :>). Besides that’s the only way I know how to do it myself. I am working on a new way to center the rotary table, but I don’t want to give my idea away yet, . . . but I t

RE: New video on youtube

look forward to the rotary table video especially centring it so it runs true Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Russ Veinot Sent: Wednesday, 8 November 2017 7:21 AM To: legacy-ornamental-mills@googlegroups.com

New video on youtube

!!!*** NEW VIDEO ***!!! My new video is now out at https://www.youtube.com/watch?v=m5pKXXZCKXY It’s about DIY faceplates for the LOM. I show how easy to make and what to watch out for. There is special attention to custom faceplates and tips for the LOM. Russ -- You received

RE: lumberjocks

I used to post (and watch) to LJ’s but now youtube is more fun to me. If a picture is worth a thousand words, what’s a video worth? :>) Russ From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE Sent: Tuesday, November

Re: tail stock on the LOM

talk, talk, talk, where's the beef?? :>) On Sunday, November 5, 2017 at 10:33:01 AM UTC-6, russ veinot wrote: > > i still use my original tailstock with the cam tensioner. i am curious if > anyone has this same set up? was it used on other models (which models)? > if y

RE: tail stock on the LOM

[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Russ Veinot Sent: Monday, 6 November 2017 9:14 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: tail stock on the LOM If your tailstock has a MT-2 then you can use a standard live center? I wish I had that. I have just a

RE: Need LOM dogs and split nut

-ornamental-mills@googlegroups.com Sent: Sunday, November 5, 2017 3:46:56 PM Subject: Re: Need LOM dogs and split nut Faceplate great idea but i'll need 4 for the many steps I do.. On Sun, Nov 5, 2017 at 8:29 AM, Russ Veinot wrote: Excellent Suggestion !!?!! From: l

RE: tail stock on the LOM

. ;-) C.A.G. _ From: "russ veinot" To: "Legacy Ornamental Mills" Sent: Sunday, November 5, 2017 11:33:00 AM Subject: tail stock on the LOM i still use my original tailstock with the cam tensioner. i am curious if anyone has this same set up? was it used on

RE: Tail stock on the LOM

; work/modifications that you do. I'm sure that on at least one of your LOMs you have improved the tensioner. Russ - get ready to be impressed! Mac _ _ -Original Message- From: russ veinot Sent: Nov 5, 2017 11:33 AM To: Legacy Ornamental Mills Subject: tail stoc

tail stock on the LOM

i still use my original tailstock with the cam tensioner. i am curious if anyone has this same set up? was it used on other models (which models)? if you changed your, how? i would like to change mine, but maybe not have to reinvent the wheel :>) looking for ideas !! -- You received this

RE: Need LOM dogs and split nut

all Legacy back and ask for Cindy. She is in charge of the parts for the manual machines the last time I checked.On Nov 3, 2017 5:05 PM, Russ Veinot wrote: > > BUY EXTRA !! :>) > > > > From: legacy-orna...@googlegroups.com > [mailto:legacy-ornamental-mills@googl

RE: Need LOM dogs and split nut

Thanks. Mac _ _ -Original Message- From: Russ Veinot Sent: Nov 4, 2017 9:40 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Need LOM dogs and split nut BUY EXTRA !! :>) Oh, I already said that. Does the headstock have a threaded head for add

RE: Need LOM dogs and split nut

ndy. She is in charge of the parts for the manual machines the last time I checked.On Nov 3, 2017 5:05 PM, Russ Veinot > wrote: > > BUY EXTRA !! :>) > > > > From: legacy-orna...@googlegroups.com > [mailto:legacy-ornamental-mills@googlegroups.com ] On Behalf Of > J

RE: Need LOM dogs and split nut

BUY EXTRA !! :>) From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Joe G Sent: Friday, November 03, 2017 6:51 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Need LOM dogs and split nut Thanks guys for the help. I cal

RE: Need LOM dogs and split nut

5/8th acme was used on my 1200 with aluminum rails. They still sold the split nut for mine (should be the same) as of a couple of months ago. Hope this helps. From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Joe Gassen Sent: Fri

New video on youtube

!!!*** NEW VIDEO ***!!! Part 5 of the “New Milling Table is on my youtube channel at https://www.youtube.com/watch?v=R9fIvlR1IDk Legacy Building, part 5 of my milling table for my Legacy Mill. See how to make the off-set dog hole pattern on the milling table top and how to us

New video on youtube

!!!*** NEW VIDEO ***!!! Part 4 of the “New Milling Table is on my youtube channel at https://www.youtube.com/watch?v=wI4zbEXnpEs This video is about designing and making the milling table top. in this video I explain what is off-set dog holes and how to use this feature as well as

New video on youtube

!!!*** ANOTHER NEW VIDEO ***!!! There is a new video on my youtube channel at https://www.youtube.com/watch?v=UI7yEniGTws it’s a follow-up of my how to build the milling table I showed last video. There were some questions that came up. This is the follow-up to those questions. --

RE: New video on youtube

very interested when you do pantograph work on your mill to see how it goes Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Russ Veinot Sent: Monday, 23 October 2017 9:37 AM To: legacy-ornamental-mills@googlegroups.com

New video on youtube

!!!*** NEW VIDEO ***!!! There is a new video on my youtube channel at https://youtu.be/LWpnuAjKJoU it’s about how to build the milling table I showed yesterday. Thanks to all for the encouragement to do this. -- You received this message because you are subscribed to the Google Groups "Le

RE: New video on youtube

@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Russ Veinot Sent: Sunday, 22 October 2017 5:32 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: New video on youtube Hello everyone, I just made a new LOM video, can be seen at https://www.youtube.com

RE: New video on youtube

Hello everyone, I just made a new LOM video, can be seen at https://www.youtube.com/watch?v=fv2fESChgBQ if interested. It’s all about my new milling table that can hold any sized piece in any position for milling and batch milling. set up is done in less than 2 minutes and changing part out in

RE: New Members and Moderation

I agree with everything Curt just said (wrote :>) I actually think that the Legacy company is wrong. I have been on a mission this year to prove that the LOM should be and can be your goto machine for most things you do in your shop. I believe that the LOM can do the work of most other machin

New video on youtube

I just made another video on youtube, https://www.youtube.com/watch?v=cJ-LjFNZbVI It’s about my $200 workbench made from a $500 antique desk. It’s not a LOM video, but might be of interest to any workshop enthusiast. All comments are welcomed. -- You received this message because you are

RE: New Legacy video on youtube

Thanks for the words of encouragement From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Chainlink Sent: Thursday, September 21, 2017 6:44 AM To: Legacy Ornamental Mills Subject: Re: New Legacy video on youtube Thanks, that's great

New Legacy video on youtube

I just made another video on youtube, https://www.youtube.com/watch?v=KlAVJY9f63Q It’s about holding pieces on edge for milling the edge of boards and panels. Asking for input to finish it. All ideas are welcomed. -- You received this message b

RE: Small boxes

I agree with Curt. I can make miter joints on my LOM, but there are definitely easier ways. From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE Sent: Sunday, September 17, 2017 10:29 AM To: legacy-ornamental-mills@g

RE: Dovetails

Do you do the spacing for dovetails (and fingers) on the x or y axis? I am not familiar with the revo but maybe you can adapt an incra jig to get exact spacing similarly to my solution on my 1200? From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.co

RE: New Legacy video on youtube

ate your incra attached to the saddle may have just solved that problem I wish I owned one to try it and see. Great idea russ Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Russ Veinot Sent: Sunday, 3 September 2017 4

RE: New Legacy video on youtube

Thanks, From: parr454 via Legacy Ornamental Mills [mailto:legacy-ornamental-mills@googlegroups.com] Sent: Saturday, September 02, 2017 2:54 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: New Legacy video on youtube Great Video, -Original Message- From: Russ

New Legacy video on youtube

I just posted a new video today. It’s about using the Incra fence system on my LOM. All comments are welcomed. https://www.youtube.com/watch?v=NDGgCE4LEsE -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this

RE: New Legacy video on youtube

I just put another video out about my other milling table if interested. Comments are always welcome. From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Russ Veinot Sent: Wednesday, August 23, 2017 6:57 AM To: legacy-ornamental

RE: New Legacy video on youtube

com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Russ Veinot Sent: Wednesday, August 23, 2017 6:57 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: New Legacy video on youtube Bill maybe even more of a tight wad, he talked him down from $10!! :>) From:

RE: New Legacy video on youtube

Sent from my Verizon 4G LTE smartphone ---- Original message From: Russ Veinot Date: 8/22/17 08:38 (GMT-05:00) To: legacy-ornamental-mills@googlegroups.com Subject: RE: New Legacy video on youtube I do have a vice for vises :>) I own 2 zyliss’s. I bought one wi

RE: New Legacy video on youtube

being done on the legacy and especially on making your own extras that you can no longer buy for them great work russ keep it up. Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of russ veinot Sent: Wednesday, 23 August 2017 6:04

Re: New Legacy video on youtube

I just posted a new video about my flat milling table and Zyliss vise. https://www.youtube.com/watch?v=E7pH00LotS8 , all comments are welcomed. > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and s

RE: New Legacy video on youtube

amental-mills@googlegroups.com] On Behalf Of Russ Veinot Sent: Tuesday, 22 August 2017 11:14 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: New Legacy video on youtube Thanks bill. I plan on making a clip to attach to different rulers. As to the “multivice thingos”, it’s a zyliss vise.

  1   2   >