finished up working on my Front mounted template follower for my
> 1000ex.
> When I changed out my Z axis and added the linear rail to my machine,
> I lost the use of my old front mounted template follower.
>
> I like to use the template follower on my Legacy to do a number of
> diff
That's not a bad idea Bill.
Perhaps soon?
C.A.G.
On Monday, April 15, 2024 at 07:56:23 PM EDT,
wrote:
Looks good curt perhaps a short video of it working to show how useful the
template follower can be
Bill
From: 'Curt George' via Legacy Ornamental Mills
Sent: Tuesday
Looks good curt perhaps a short video of it working to show how useful the
template follower can be
Bill
From: 'Curt George' via Legacy Ornamental Mills
Sent: Tuesday, April 16, 2024 7:28 AM
To: Legacy ornamental mills
Subject: New front mounted template follower
Hello Everyone
;>>>> on the front side of the blank following a template. They were
>>>>> indexed using my mod index arrangement described in detail
>>>>> previously.
>>>>>
>>>>> [image: PfeilStyleHandles.JPG]
>>>>>
ondon pattern handles were made from straight
>>>> octagonal blanks prepared on the REVO then mounted on
>>>> my Supershop lathe for copy routing from a pattern. This is
>>>> a batch made a little while ago. Now all my carving tools have
>>>> these hand
nal blanks prepared on the REVO then mounted on
>>> my Supershop lathe for copy routing from a pattern. This is
>>> a batch made a little while ago. Now all my carving tools have
>>> these handles or the original Pfeil. Notice the brass ferrules
>>> I made from bra
...@gmail.com wrote:
You've got some useful mods there. I do use the template follower on my REVO
for replicating Pfeil handles and other simple profiles. Will be "twisting"
some oak burl handles to a simple profile soon. I hope.DanK
On Sunday, June 4, 2023 at 12:44:19 PM UTC-4 bulk...@
ge: CarvingToolHandles.JPG]
>>
>> DanK
>>
>> On Tuesday, June 6, 2023 at 10:55:46 PM UTC-4 Tim Ziegler wrote:
>>
>> Hey Dan if you don't mind sharing some of that, I'd take a look for sure.
>>
>> Kind Regards,
>>
>> Timothy J. Ziegler
>&
useful mods there. I do use the template follower on my
> REVO for replicating Pfeil handles and other simple profiles. Will be
> "twisting" some oak burl handles to a simple profile soon. I hope.
> DanK
>
> On Sunday, June 4, 2023 at 12:44:19 PM UTC-4 bulk...@mmnet.co
You've got some useful mods there. I do use the template follower on my
REVO for replicating Pfeil handles and other simple profiles. Will be
"twisting" some oak burl handles to a simple profile soon. I hope.
DanK
On Sunday, June 4, 2023 at 12:44:19 PM UTC-4 bulk...@mmnet.com.au w
I totally agree with you
Bill
From: 'Curt George' via Legacy Ornamental Mills
Sent: Monday, June 5, 2023 12:12 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Using the Template follower on the Legacy Ornamental Mill
Thank you Bill.
I have one more posting to do
e on the shims and or bushings that can be used
> to make small changes in your template following.
>
> Have anyone ever shimmed a grinder's, grinding wheel? on the wheels arbor
> there are normally a set of plastic round shims so you can get your wheel
> trued up on a number of differe
n the wheels arbor
there are normally a set of plastic round shims so you can get your wheel trued
up on a number of different sized shafts."Well" This is the idea. build up the
bushing on the template follower . This way when you get to the size you want,
you can remove one more sma
eryone.
>
> I just got home form work.
>
> Before I forget I did note on the shims and or bushings that can be used
> to make small changes in your template following.
>
> Have anyone ever shimmed a grinder's, grinding wheel? on the wheels arbor
> there are normally a set of plas
; Ornamental Mills wrote:
>
>
> Hello Everyone.
>
> I just got home form work.
>
> Before I forget I did note on the shims and or bushings that can be used
> to make small changes in your template following.
>
> Have anyone ever shimmed a grinder's, grinding wheel?
Thank you Bill.
I have one more posting to do on this topic.
I believe the template follower on the Legacy is something that most peopledo
not use, It can offer so many possibility's and design elements that you just
can not make on the machine any other way.
Have a GREAT DAY.
C.A.G
Lots of great info there curt
Bill
From: 'Curt George' via Legacy Ornamental Mills
Sent: Sunday, June 4, 2023 3:40 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Using the Template follower on the Legacy Ornamental Mill
Hello everyone.
Here are a few more template
lowing.
>
> Have anyone ever shimmed a grinder's, grinding wheel? on the wheels arbor
> there are normally a set of plastic round shims so you can get your wheel
> trued up on a number of different sized shafts.
> "Well" This is the idea. build up the bushing on the template foll
y a set of plastic round shims so you can get your wheel
> trued up on a number of different sized shafts.
> "Well" This is the idea. build up the bushing on the template follower .
> This way when you get to the size you want, you can remove one more small
> shim, making the
round shims so you can get your wheel trued
up on a number of different sized shafts."Well" This is the idea. build up the
bushing on the template follower . This way when you get to the size you want,
you can remove one more small shim, making the follower slightly smaller so
you
nal
> shape. You may find this faster and less nerve racking at the very
> beginning of template work.
> Now the fun part. once the final shape has been reached. you can adjust
> the template follower slightly to make designs such as tapered rope cutting
> and any fine detail.
>
Yes that Pie crust table really was something else I loved it
And yes the template follower is the least used and such an untouched resource
You are the man curt in that area
Bill
From: 'Curt George' via Legacy Ornamental Mills
Sent: Monday, 16 January 2023 11:54 AM
To: legacy
Hey there Bill!
I like to use templates on the Legacy. I also feel that the Template follower
is one of the least used Tools on the LOM.Zeke used a template to make his Pie
crust table. (Yes its an old topic. but perhaps one that others might like to
see.) https://ornamentalmills.com
Oh and this is a captive template before anyone asks
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of bulke...@mmnet.com.au
Sent: Monday, 16 January 2023 10:40 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: template follower
Most of the things
there will be somebody with the clock video for you.
Mike OK
On 8/21/2022 10:47 PM, Dante5d wrote:
I have found instructions on how to assemble the template follower, but
nothing on how to use it. I have steel templates from Legacy for a clock, but
nothing on how to use them. I'm stuck, can
PM, Dante5d wrote:
I have found instructions on how to assemble the template follower,
but nothing on how to use it. I have steel templates from Legacy for a
clock, but nothing on how to use them. I'm stuck, can anyone walk me
thru the process on using the template follower?
Respectfully
irely different type of template follower. On that the follower
would sit directly under the part. But that's just me, and my wants.
I wish you luck on your ventures. Please let us know how it turns out for you.
C.A.G.
On Sunday, August 21, 2022 at 11:47:09 PM EDT, Dante5d
wrote:
I have found
I have found instructions on how to assemble the template follower, but
nothing on how to use it. I have steel templates from Legacy for a clock,
but nothing on how to use them. I'm stuck, can anyone walk me thru the
process on using the template follower?
Respectfully,
Dante5d
--
You
Pretty cool, Curt.
DanK
On Tuesday, July 12, 2022 at 1:00:26 AM UTC-4 aussiman wrote:
> Nice work curt good to see your template follower in action again
>
>
>
> Bill
>
>
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-orna...@googlegroups
Nice work curt good to see your template follower in action again
Bill
From: 'Curt George' via Legacy Ornamental Mills
Sent: Tuesday, 12 July 2022 10:21 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Front mounted template follower Part 2
Hello Everyone.
I have the day
Curt, nice work
On Mon, Jul 11, 2022 at 7:21 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:
> Hello Everyone.
>
> I have the day off, So I was able to play in the shop today.
> I used my front mounted template follower today.
ups.com> wrote:
> Hello Tim
>
> OK. Not quite. I am using the template follower to add the details to
> the turning, NOT to make the hole turning its self.
>
> I find the best way to use the Legacy, is to use it as part of the process
> of fabricating, It is NOT the one step
Hello Tim
OK. Not quite. I am using the template follower to add the details to the
turning, NOT to make the hole turning its self.
I find the best way to use the Legacy, is to use it as part of the process of
fabricating, It is NOT the one step, End-All-Be-All machine.
I have made all my
Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:
> Hello Everyone.
>
> I have the day off, So I was able to play in the shop today.
> I used my front mounted template follower today. AND Over all I am happy
> with
> what I was a
ups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Monday, 6 June 2022 5:38 AM
> *To:* LOM Group
> *Subject:* Re: New Front mounted template follower
>
>
>
> Hey Bill,
>
>
>
> Yes that new coat of paint makes it look b
ct: Re: New Front mounted template follower
Hey Bill,
Yes that new coat of paint makes it look brand new. Now you need to paint the
lathe the same color.
Excellent job to I might add.
How long can you turn now?
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
1
I like these curt nice work
Bill
From: 'Curt George' via Legacy Ornamental Mills
Sent: Monday, 6 June 2022 3:55 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New Front mounted template follower
I like it Bill
I had to do something similar a few years ago on my S.S
4 steps you would be even more
>
> diverse in different width bits. Or of course have more then one tracing
> pin at different sizes.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
&
may not looks like much. but I finally got my template
follower to work. Its rock solid,fully adjustable, and holds 1/4" templates
well.
The trick to use the template follower on the Legacy that I have found, is to
have the template follower only control the Y axis, and the X axis is moved by
;
>
> On Sat, Jun 4, 2022 at 4:28 PM 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com> wrote:
>
> Hello everyone.
> It may not looks like much. but I finally got my template follower to
> work. Its rock solid,
> fully adjustable, and h
Mills
wrote:
Hello everyone.It may not looks like much. but I finally got my template
follower to work. Its rock solid,fully adjustable, and holds 1/4" templates
well.
The trick to use the template follower on the Legacy that I have found, is to
have the template follower only control th
60th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Sat, Jun 4, 2022 at 4:28 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:
> Hello everyone.
> It may not looks like much. but I finally got my template follower to
> w
Very innovative
On Saturday, June 4, 2022, 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:
> Hello everyone.
> It may not looks like much. but I finally got my template follower to
> work. Its rock solid,
> fully adjustable, and ho
mills
Subject: New Front mounted template follower
Hello everyone.
It may not looks like much. but I finally got my template follower to work. Its
rock solid,
fully adjustable, and holds 1/4" templates well.
The trick to use the template follower on the Legacy that I have found, i
Ingenious use of existing resources!
DanK
On Saturday, June 4, 2022 at 5:28:43 PM UTC-4 Curt George wrote:
> Hello everyone.
> It may not looks like much. but I finally got my template follower to
> work. Its rock solid,
> fully adjustable, and holds 1/4" templates well.
>
Looks great curt, do you have a way of changing styles dia to match the dia of
the router bit your using?
Bill
From: 'Curt George' via Legacy Ornamental Mills
Sent: Sunday, 5 June 2022 7:28 AM
To: Legacy ornamental mills
Subject: New Front mounted template follower
Hello everyone
6330
320-294-5798 shop
320-630-2243 cell
On Sun, Nov 14, 2021 at 6:50 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:
> HI Tim
>
> Making a new template follower is my goal.
> I'm not sure how or what I will change to do so
HI Tim
Making a new template follower is my goal. I'm not sure how or what I will
change to do so. My template follower that I made is pretty neat already, I
used Uni-strut and ran it through my rails. T bolts hold it onto the Extruded
alum. I made it so my templates were in the front
ups.com> wrote:
> Hello everyone.
>
> Just wondering if any of you were looking at using the template follower
> any time in the neat future?
>
> I've been playing with the idea of re-making my follower again. (for the
> 4th or 5th time.)
>
> The Template follower was som
I agree on all points curt I’m just getting the ball rolling so to speak
Bill
From: 'Curt George' via Legacy Ornamental Mills
Sent: Sunday, 14 November 2021 11:53 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: The Legacy template follower?
HI Bill
Legacy did
rizontal
would help too just my opinion
Bill
From: 'Curt George' via Legacy Ornamental Mills
Sent: Sunday, 14 November 2021 7:55 AM
To: Legacy ornamental mills
Subject: The Legacy template follower?
Hello everyone.
Just wondering if any of you were looking at using the templat
Legacy Ornamental Mills
Sent: Sunday, 14 November 2021 7:55 AM
To: Legacy ornamental mills
Subject: The Legacy template follower?
Hello everyone.
Just wondering if any of you were looking at using the template follower any
time in the neat future?
I've been playing with the idea
Hello everyone.
Just wondering if any of you were looking at using the template follower any
time in the neat future?
I've been playing with the idea of re-making my follower again. (for the 4th or
5th time.)
The Template follower was something Legacy talked about, but never went into
any
t:* Friday, 11 December 2020 12:03 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Sources for the Template Follower Styluses
>
>
>
>
>
> So to get back to everyone in regards to the Stylus Pins. My Brother is
> not interested at this time in taking this proj
of the index pins legacy sold are steel dowel pins pressed into
>>>>> the aluminum holder. They were only used if you ordered the upgraded z
>>>>> axis. There was an updated follower designed that took those pins as
>>>>> well.
>>>>>
>&
:03 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Sources for the Template Follower Styluses
So to get back to everyone in regards to the Stylus Pins. My Brother is not
interested at this time in taking this project on
as he is working countless hours of over time and cutting
t;>> in brass. Would it hurt to price both materials (aluminum and brass)?
>>>>
>>>>
>>>>
>>>> Also, you probably thought of it already but in order to fit into the
>>>> hole in the stylus adjustment plate the top of each stylus m
t; Curt made a version for himself a long time ago. Maybe he has the photos
>>> handy.
>>>
>>>
>>>
>>> *From:* legacy-orna...@googlegroups.com
>>> *On Behalf Of *Tim Ziegler
>>> *Sent:* Monday, November 30, 2020 7:18 PM
>>> *To:*
egroups.com
>> *On Behalf Of *Tim Ziegler
>> *Sent:* Monday, November 30, 2020 7:18 PM
>> *To:* legacy-orna...@googlegroups.com
>> *Subject:* Re: Sources for the Template Follower Styluses
>>
>>
>>
>> yes sir. I used stylus tracing pins for 20 y
os
> handy.
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Monday, November 30, 2020 7:18 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Sources for the
handy.
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of Tim Ziegler
Sent: Monday, November 30, 2020 7:18 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Sources for the Template Follower Styluses
yes sir. I used stylus tracing pins for 20 years on Weing Grinders
Right
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of Ray Leaman
Sent: Tuesday, 1 December 2020 2:07 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Sources for the Template Follower Styluses
Thanks Tim. I just got back on and saw the stylus posts
me
>>>
>>>
>>>
>>> Bill
>>>
>>>
>>>
>>> *From:* legacy-ornamental-mills@googlegroups.com <
>>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
>>> *Sent:* Tuesday, 1 December 2020 10:39 AM
t; *On Behalf Of *Tim Ziegler
>> *Sent:* Tuesday, 1 December 2020 10:39 AM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> *Subject:* Re: Sources for the Template Follower Styluses
>>
>>
>>
>> thanks Bill do we want them priced in Brass?
>>
>>
>&
Hi Bob,
So you've been making your own too?
We are checking with my Brother to see if he'd make some for some of the
guys that don't do much
metal work but could use them on the LOM's
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798
er
> *Sent:* Tuesday, 1 December 2020 10:39 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Sources for the Template Follower Styluses
>
>
>
> thanks Bill do we want them priced in Brass?
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
>
Very nice stylus. Looks like the one I made, now to build some more. Christmas
decorations are up time to hit the shop.
Sent from Bob Mark's iPad
> On Nov 30, 2020, at 1:39 PM, Tim Ziegler wrote:
>
>
> I have a brother that can make anything you could possibly want?
>
> Kind Regards,
>
>
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Sources for the Template Follower Styluses
thanks Bill do we want them priced in Brass?
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243
;
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Tuesday, 1 December 2020 10:31 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Sources for the Template Follower Stylu
I would add a ¾ dia one too
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of Tim Ziegler
Sent: Tuesday, 1 December 2020 10:31 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Sources for the Template Follower Styluses
There we go I know someone would have
2020 at 4:43 PM wrote:
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Tuesday, 1 December 2020 9:03 AM
> *To:* legacy-ornamental-mills@googlegroups.com
&
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of Tim Ziegler
Sent: Tuesday, 1 December 2020 9:03 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Sources for the Template Follower Styluses
Ray I am not sure.. If someone chimes in to what we should have I
Sounds good will do.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Mon, Nov 30, 2020 at 4:05 PM Ray Leaman wrote:
> I'll leave it in your hands.
>
> On Mon, Nov 30, 2020 at 5:03 PM Tim Ziegler wrote:
I'll leave it in your hands.
On Mon, Nov 30, 2020 at 5:03 PM Tim Ziegler wrote:
> Ray I am not sure.. If someone chimes in to what we should have I can
> check with him and have him price some.
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
>
Ray I am not sure.. If someone chimes in to what we should have I can check
with him and have him price some.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Mon, Nov 30, 2020 at 4:01 PM Ray Leaman wrote:
What do you think a good set would include size wise? Cost? Legacy had a
set of 5 I think? Don't know sizes.
Ray
On Mon, Nov 30, 2020 at 4:39 PM Tim Ziegler wrote:
> I have a brother that can make anything you could possibly want?
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork &
gt;
>
> *From:* legacy-ornamental-mills@googlegroups.com [mailto:
> legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Ray Leaman
> *Sent:* Monday, November 30, 2020 12:24 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Sources for the Template Follower Styluses
&
I have a brother that can make anything you could possibly want?
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Mon, Nov 30, 2020 at 2:24 PM Ray Leaman wrote:
> Did anyone have any sources where we
gt; legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Ray Leaman
> *Sent:* Monday, November 30, 2020 12:24 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Sources for the Template Follower Styluses
>
>
>
> Did anyone have any sources where we might get a sui
-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Ray Leaman
Sent: Monday, November 30, 2020 12:24 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Sources for the Template Follower Styluses
Did anyone have any sources where we might get a suitable
Did anyone have any sources where we might get a suitable replacement for
the styluses we all lost or never had to begin with?
Ray
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving
r doing that.
> Thanks.
> Mac
> --
>
> -Original Message-
> From: bulke...@mmnet.com.au
> Sent: Nov 29, 2020 10:13 PM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: RE: My 1200 - Accessories: Template Follower
>
> Ok here’s
98 shop
>> 320-630-2243 cell
>>
>>
>> On Sun, Nov 29, 2020 at 8:00 PM wrote:
>>
>> I don’t know mac I make my own I would assume you would have to get them
>> made I wouldn’t be beyond making them out of really hard wood or plastic on
>> the legacy or
Great idea Bill. I did not consider doing that.Thanks.Mac-Original Message-
From: bulke...@mmnet.com.au
Sent: Nov 29, 2020 10:13 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: My 1200 - Accessories: Template Follower
Ok here’s a thing when making the larger ones use
Sun, Nov 29, 2020 at 8:00 PM wrote:
>
> I don’t know mac I make my own I would assume you would have to get them
> made I wouldn’t be beyond making them out of really hard wood or plastic on
> the legacy or wood lathe
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamenta
I agree
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of M.W.Foscue
Sent: Monday, 30 November 2020 6:11 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: My 1200 - Accessories: Template Follower
Thanks Bill,
Good idea. Not really necessary to be out
on the LOM (and brass too?) if you very carefully use a carbide cutter.Mac-Original Message-
From: bulke...@mmnet.com.au
Sent: Nov 29, 2020 9:00 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: My 1200 - Accessories: Template Follower
I don’t know mac I make my own I would assume you
lls@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Monday, 30 November 2020 2:46 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: My 1200 - Accessories: Template Follower
>
>
>
> Thanks Bill
Tim Ziegler
>> *Sent:* Monday, 30 November 2020 2:03 PM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> *Subject:* Re: My 1200 - Accessories: Template Follower
>>
>>
>>
>> Should be a couple metal templates I think that are created by Legacy
>> that are w
Closed template
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of Tim Ziegler
Sent: Monday, 30 November 2020 2:46 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: My 1200 - Accessories: Template Follower
Thanks Bill exactly what I was trying to explain. Ray
1200 - Accessories: Template Follower
Ray did you see what Curtis just dropped in our laps
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Sun, Nov 29, 2020 at 9:31 PM 'Curt George'
s.com> *On Behalf Of *Tim Ziegler
> *Sent:* Monday, 30 November 2020 2:03 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: My 1200 - Accessories: Template Follower
>
>
>
> Should be a couple metal templates I think that are created by Legacy that
> are wave pa
Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Monday, 30 November 2020 2:03 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: My 1200 - Accessories: T
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of Tim Ziegler
Sent: Monday, 30 November 2020 2:03 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: My 1200 - Accessories: Template Follower
Should be a couple metal templates I think that are created
>
>>>>>
>>>>> On Sun, Nov 29, 2020 at 8:00 PM wrote:
>>>>>
>>>>>> I don’t know mac I make my own I would assume you would have to get
>>>>>> them made I wouldn’t be beyond making them out of really hard wood or
glegroups.com
> *Subject:* RE: My 1200 - Accessories: Template Follower
>
>
>
> Bill,
>
> Thanks. Where does one get more styluses - of the various sizes?
>
> Mac
> --
>
> -Original Message-
> From: bulke...@mmnet.com.au
>
my own I would assume you would have to get them
> made I wouldn’t be beyond making them out of really hard wood or plastic on
> the legacy or wood lathe
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com>
gt;> On Sun, Nov 29, 2020 at 8:00 PM wrote:
>>
>> I don’t know mac I make my own I would assume you would have to get them
>> made I wouldn’t be beyond making them out of really hard wood or plastic on
>> the legacy or wood lathe
>>
>>
>>
>> Bill
making them out of really hard wood or plastic on the legacy
or wood lathe
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of M.W.Foscue
Sent: Monday, 30 November 2020 12:55 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: My 1200 - Accessories: Template Follower
>
>>>>
>>>> On Sun, Nov 29, 2020 at 8:00 PM wrote:
>>>>
>>>>> I don’t know mac I make my own I would assume you would have to get
>>>>> them made I wouldn’t be beyond making them out of really hard wood or
>>>>> plastic on the l
1 - 100 of 190 matches
Mail list logo
