Am 25.02.2010 19:48, schrieb Manoj Rajagopalan:
Is it possible to split a table and/or equation array from above or below
the current cell?
No. You have to create a new table and copy in there the part of the existing table you want to have
split.
regards Uwe
Am 25.02.2010 19:53, schrieb Erez Yerushalmi:
Yes, I'm now using \underline, instead, and problem solved! :-)
So, the *problem* arises when I'm in math mode, and I type as usual:
\underbar space, \alpha space, and I get my equation. All seems fine.
However, when I PDF it, LyX *crashes*.
franck.me...@orange-ftgroup.com schrieb:
It seems impossible to use Lyx 1.6 with miktex 2.8 on my laptop on
windows XP.
Each time lyx doesn't recognize the document classes, saying that the
layout are not available (article, scrbook,...)
Hmm, and you are sure that you have only one LaTeX syste
Erez Yerushalmi schrieb:
When I use the \underbar I get an error message. See them below.
In math box, I type
x
\underbar{x}
\underbar{\alpha}
You don't need the braces, just press Spacebar to finish a command. For
more info about formulas, have a look at the Math manual that you find
in th
George Fairbanks schrieb:
I'm writing a book with LyX using the Memoir class and I'd like to
rotate a table. I can select the table float properties and set it to
be a sideways table, but then I get the following errors. I've tried to
shorten the LaTeX output to just the relevant parts, but le
Sajjad schrieb:
> When i add float figure the it is automatically numbered as Figure: 2.2
What do do if would like to have it as Figure: 2.2(a) instead?
So you want to have two subfigures 2.2(a) and 2.2(b)?
This is described in sec. 3.7 "Subfloats" of the EmbeddedObjects manual
that you fin
franck.me...@orange-ftgroup.com schrieb:
Thanks for your answer.
I am behind a firewall but the installation of Lyx on my desktop computer (also
behind the firewall) was OK: I had just to install after manually the
dictionaries.
I will try this evening at home, without firewall, but it seems t
franck.me...@orange-ftgroup.com schrieb:
The second one, my laptop, didn't have latex so I installed miktex 2.8
(complete version) first.
Then I have installed Lyx 1..6.5 but I had a problem: all the layouts
are not recognized so I can't view neither print documents ("document
class not availa
Mike Ingram schrieb:
I created a new document from File, New. Then I typed in "This is my
first LyX document!". I then did a Save As. From there I tried to view
in DVI. When I try to view I get the errors.
The errors occur because you have some special (in this case invalid)
LaTeX-code.
Mike Ingram schrieb:
I am attempting to go through the Getting Started with LyX Tutorial.
I am getting these errors from working through 2.1.1 and trying to
display in dvi. What is going on and how do I correct?
What have you done? You opened the Tutorial via the menu Help->Tutorial
and
Am 21.02.2010 20:17, schrieb Dave Dixon:
I've imported a TeX document that worked great under MikTeX/TeXCenter on
winders. It has a big table that has to be printed landscape and has
footnotes so it has to be in a minipage. So, what worked previously was
\begin{sidewaystable}
\caption{A Table}
Found a couple of posts on the net
that hinted turning off temporary directory and generating temporary files
in the document directory while only using relative paths with
\graphicspath would help. Unfortunately i can't find a setting in LyX that
allows to turn
off temporary directory.
Delete
Am 15.02.2010 19:11, schrieb Kamran SHAFQAT:
while this works fine but I am having problem with hycap now because of
the redefinition. I can't use hypcap after these statements it gives error
TeX capacity exceeded, sorry [input stack size=5000].
and when hypcap is used before the environment d
Am 14.02.2010 18:26, schrieb KimberlyQ:
I am a new Lyx user, hoping to write a technical manual using this wonderful
program. Beyond the introduction and first chapter, most of the entire
manual consists of a table on every page. The table covers the full page.
The table itself is the same on
Am 16.02.2010 16:22, schrieb lia chatzidiakou:
I have installed Lyx 1.6 in Windows XP, and everything works fine
apart from check speller.
I have aspell 0-50-3-3 installed and on that the English package, in C
directory as suggested. Initially it was installed in Program Files
too and moved it
Am 15.02.2010 19:30, schrieb Todd Salamon:
I am running Lyx 1.5.7 on Windows XP SP2 with MiKTeX 2.5 installed.
This is most probably the reason.
Before you proceed fiddling around in your system to find the
misconfiguration, I recommend to
1. uninstall LyX _completely_
2. uninstall MikteX 2
Am 12.02.2010 10:36, schrieb Stephen George:
I'm a newbie to Lyx, and was playing with the Tufte book class.
I'm a little confused,
I downloaded Lyx Example File from
http://wiki.lyx.org/Layouts/Tufte-book#toc1
Better take the example files you find in LyX's "examples" folder.
When I try to
Gerald Cecil schrieb:
Lyx 1.6.5 (normal Windows installer running under XP/SP3) doesn't
execute the very convenient lp.exe windows print dialog command
discussed at http://wiki.lyx.org/Windows/LyXWinTips
The easiest and most safe way of printing is to export your document as
PDF(pdflatex) an
Am 10.02.2010 04:57, schrieb Rich Shepard:
It's not happy with this: "Undefined control sequence" is the error
message.
This works:
\usepackage{babel}
\addto\captionsenglish{\renewcommand{\figurename}{Map}}
regards Uwe
Am 10.02.2010 03:39, schrieb Rich Shepard:
I read the section on figures and tables in the KOMA-Script manual
without
seeing just how to change the default "Figure n: " to "Map n: " preceeding
the captions. Please pass me a clue on how to do this.
Try this in the preamble:
\addto\captionsen
> Another problem I am having is with too many floating figures. I have a
> large document with anywhere from 3-100 figures within each chapter.
> I keep getting the error regarding too many floats.
This is not a LyX bug but a restriction of LaTeX. LaTeX's floating algorithm works perfectly for a
Am 07.02.2010 21:06, schrieb robert hagge:
Hi there--Could you please tell me how to increase the font size in my math
equations--the sub& super scripts are way too small.
The LyX math manual explains some ways how to achieve this. A few days ago I noticed that I missed
there to describe th
Am 07.02.2010 17:36, schrieb Marco Stara:
Lyx 1.6.5 on XP.
In a new "Book" document, I would use the Palatino font but I get this
error when creating the PDFLatex:
! Font OML/zplm/m/it/12=zplmr7m at 12.0pt not loadable: Metric (TFM) file not
found.
This means that the font Palatino is not in
Am 06.02.2010 02:49, schrieb John Adams:
I am using a two-column template. While reading a wiki page on tables, it
said that in order to span a table into two columns, I had to insert a
"Table Wrap Float"
Where have you found this statement? This is wrong and I need to correct this. You need t
Marcelo Acuña schrieb:
The unique problem that I could not solve is to have
> icons adapted for those buttons, since, I don´t know in which
> directory I must put them and whereupon name so that it
> takes them to Lyx.
You only need to replace the existing icons in the LyX installation
su
Am 02.02.2010 10:32, schrieb Guenter Milde:
I am using italics for the legends. If they contain units such as (864m),
should they still be upright?
.. [checklist] `SI Unit rules and style conventions`
Check List for Reviewing Manuscripts:
http://physics.nist.gov/cuu/Units/checklist.htm
Am 03.02.2010 22:37, schrieb Frederick Noronha:
When I took the lighter version of the Windows Lyx download (about
21MB, I think), there were some "integrity check" issues. On taking
the entire bundle (about 100+ MB), I found that there was some missing
software, and it was taking hours to downl
Am 04.02.2010 00:47, schrieb Julien Rioux:
When you get option clashes with the geometry package, the problem can be
avoided by selecting:
- "Default Format" under "Document Settings"> "Page Layout".
- "Default Margins" under "Document Settings"> "Page Margins".
Damn me! I did this in
Am 03.02.2010 20:05, schrieb Virgil Stokes:
First, I am trying to get started with LyX (vers. 1.6.4) on a Ubuntu
(vers. 9.10) platform. I am also very new with Ubuntu trying to migrate
from Windows...
LyX: Document class not available
This is because every LaTeX distribution only offers a bas
Craig Baudendistel schrieb:
I have a question regarding the elsarticle document class. Elsevier's
website provides a pdf document that explains the newest elsarticle and
its options. That website is:
http://www.elsevier.com/framework_authors/misc/elsdoc.pdf
In this document, item number 4 ou
Olivier Ripoll schrieb:
The question is what size we should design for because right-clicking
on a toolbar offers you 3 different icon sizes.
I remember that one of the Tango designer, Jimmac, bloggeed about how
the scalable (svg) icons were not good, but they could still be a solution.
Most
Dean Chandler schrieb:
I am brand new to lyx/latex/tex.
I installed lyx 1.61 under Ubuntu 8.04, using the Ubuntu backports
repository. When I tried to print the tutorial,
It should at least work when you export or view the file as PDF
(pdflatex) and then print it using your PDF viewer prog
Olivier Ripoll schrieb:
Fuzzy icons when they should be sharp, black lines that are not lines
nor black any more. Don't tell me you don't see the problem with the
table float image, it's obvious.
I must admit that I never noticed this. As I now know where to look, I
see that the lines in thi
Olivier Ripoll schrieb:
When you have a look at the icons in the "images" folder, you see that
there are icons with the size 24x24, 22x22 and 20x20; and all look OK
for me in the toolbar.
They don't for me: See attached picture, esp. the "table float" and the
"save" icons. But since I'm not
Olivier Ripoll schrieb:
I think LyX images need to be 20x20, at least on Windows with your
version, or the result is ugly.
When you have a look at the icons in the "images" folder, you see that
there are icons with the size 24x24, 22x22 and 20x20; and all look OK
for me in the toolbar.
I'd
Am 31.01.2010 19:48, schrieb Arik Raffael Funke:
However, when I try to activate the hyperref option in the document
setting I get the error message below. - It stumbles over a section
definition line. The error seems to be repeated for any "heading"
definition that would appear in the TOC.
===
Am 31.01.2010 23:15, schrieb Marcelo Acuña:
I need to make many changes in the size of the letters, and also to put bold or
normal, in texts in which I must emphasize certain parts.
It would help me much to have buttons such as those of emphasized and noum.
How I can add them to the tool ba
Am 30.01.2010 10:28, schrieb Wolfgang Engelmann:
Is the package \unit for the correct setting of units (kg etc) build in in LyX
or do I have to use ERT?
LyX supports this package. For a description have a look at the Math manual, appendix A "Typographic
Advice".
I did not find it in the va
Am 30.01.2010 23:21, schrieb jsl:
1. The title page has the title, a picture in a float and the author name.
These should all fit on one A4 page (easily). However Lyx's insists on
putting a page break after the title. How can I get all these elements on
one page.
I recommend to use a KOMA-scri
M-L schrieb:
\rowcolow{cyan}
Thanks for the info, I'll fix this for the next release.
I possibly incorrectly assume it should read:
\rowcolor{cyan}
Discovered this while getting more adventuress and trying to colour a
row. But it doesn't work with either spelling for me.
Table 2.15 of th
Am 28.01.2010 00:05, schrieb Vincent:
But the justified line break doesn't work for me in tables..
Does it for you ?
Yes, see table 2.8 of the EmbeddedObjects manual.
I tried
A B [Justified-line-break]
C
in a cell, but it doesn't justify.
It only breaks the line because the cell alignme
Vincent schrieb:
I have to "set" the table column widths to
make any command at all work, and then possibly, just possibly,
Ctrl+Enter will make the new line anyway.
Yes, you have to set a column width :). Don't ask me why.
This is LaTeX. There is no other way because otherwise the width c
M-L schrieb:
I haven't done anything with tables in LyX, always used OpenOffice, but
thought I would give LyX a larrup to create a table and see how I went.
No I really don't have the time to be fooling round with it
but.. :-)
LyX Version 1.6.5
Debian Squeeze [testing]
Using Article [KOMA-
Am 23.01.2010 05:09, schrieb Steven Bell:
What is the difference between "New Page" (\newpage{}) and a "Page Break"
(\pagebreak{})?
See the LyX user's guide sec. 3.5.5 "Forced Page Breaks".
regards Uwe
Am 20.01.2010 21:28, schrieb Frederick Noronha [फ़रेदरिक नोरोनया] فريدريك
نورونيا:
I want to add the contributory writers' names to the table-of-contents
of an anthology where almost every chapter is written by a different
author. Is that possible, without including the names in the chapter
titl
Hwan Lin schrieb:
Attached is a LyX file that cannot go with subequations. Please have a
look and help me.
Why haven't you followed my advice to set the AMS option as I wrote? Doing this, subequations will
be known by LaTeX as I explained.
Besides this, there were was a mistake: You set the
Hwan Lin schrieb:
From my other papers, on math options, it was set at "use AMS math
package automatically." These papers worked perfectly with
subequations.
The current paper that bothers me also has the same math option as
above-mentioned. I don't understand why it can not deal with
subequa
HL2050 schrieb:
Hello, I used "\begin{subequations}" and "\end{subequations}" to have
equations in between. It worked on my two earlier research papers using LyX
1.6 mac os snow leopard. But suddenly the same way stopped working in a new
LyX file. I just can't figure it out.
You need to assure
Marcelo Acuña schrieb:
If I choose Times Roman for roman font, what font I must to choose for sans
serif font If I want to obtain an aesthetically coherent aspect?
Times is a font designed for newspapers (New York Times). Its glyphs are
therefore thinner with less space between them. When y
Birte S. schrieb:
my problem is similar with lyx 1.6 and installed packages soul and xcolor
and reconfiguration of lyx and restart of lyx, though the error message is
as follows:
" Changes will not be highlighted in LaTeX output when using pdflatex
because
xcolor and soul are not installed.
Plea
Philip Stubbs schrieb:
\documentclass[draft,approved]{danrep}
\title{This is a test report title that I will make quite long.}
\repnum{10-00}
\author{Philip Stubbs}
\date{2010-01-12}
\begin{document}
The next LyX version will support this structure, but why have you
chosen to have the title b
Am 17.01.2010 16:53, schrieb Joachim Osnabryg:
You haven't used the new version, but the old one. Can you please
recheck this?
You are right, I didn't realize that you had made the correction in the
English version, not the German.
That's not correct, take the latest version from our LyX 1.6
Am 17.01.2010 01:38, schrieb Joachim Osnabryg:
I replaced the ~ now with a +, please check if this version:
http://www.lyx.org/trac/export/33063/lyx-devel/branches/BRANCH_1_6_X/lib/doc/EmbeddedObjects.lyx
works now for you.
Here not, sorry. Still the same errors. (See below)
You haven#t use
Am 15.01.2010 13:28, schrieb Richard Brown:
On Fri, 2010-01-15 at 13:09 +0100, Uwe Stöhr wrote:
Hmm, what is your document class, what version of KOMA-script?
The document class is BOOK (Koma script) and the version of Koma script
is the default I have with my installation of Lyx 1.5.3
Am 15.01.2010 09:30, schrieb Richard Brown:
I'm struggling still, though I can now see some progress...
But my problem now is that I have an unwanted empty white page after
some, but not all, chapters.
You have a book class. Books are printed double-sided; therefore a new chapter is started on
Am 16.01.2010 15:24, schrieb rgheck:
Today I tried to make a pdf or dvi from the LyX Help doc/de
"EmbeddedObjects", but it stops with LaTeX errors at the floating
table 22 before the section head 2.12.3. I report the first LaTeX
errors below.
LaTeX Warning: Command \textasciitilde invalid in
E. Kaplan schrieb:
I solved my problem by inserting ERT just before the appendix starts:
\renewcommand{\theequation}{A.\arabic{equation}}
\setcounter{equation}{0}
However, I would still like to do this with the features of Lyx, if
possible.
Your solution is the only one.
regards Uwe
Richard Brown schrieb:
Thanks for the reply. On Lyx 1.5.3 on ubuntu I found
Documents->Settings->Document class and the field "Options"
which I assumed was the same; I pasted into there the string
chapterprefix=true
That is correct.
but it didn't do anything. Am I missing some step?
Hmm,
Am 14.01.2010 23:48, schrieb Richard Brown:
But I don't understand where to put this chapterprefix=true command,
add this in the menu Documents->Settings->Document class to the field "Custom".
regards Uwe
william.croc...@analog.com schrieb:
The following is an elyxer problem...
I'm therefore forwarding your email to the elyxer mailing list.
---
I include a simple text (child) document, verbatim
in my top level lyx document.
Insert->File->Child Document...
Include Type: Verbatim.
The r
meo...@techunix.technion.ac.il schrieb:
You really helped me with the figures numbering. I have used the
\renewcommand{\thefigure}{\arabic{figure}} command.
As for the equations, I have used the same, with "equation" instead of
"figure".
It did solved the nesting problem, however it restarts the
meo...@techunix.technion.ac.il schrieb:
I use LyX and the document type is article(ams).
My problem is that suddenly the numbering of both the equations and figures
became nested according to the sections (2.1,2.2 ext.), while I want it to be
in a regular simple order (1, 2, ext.).
Nested numb
Am 10.01.2010 03:36, schrieb Manoj Rajagopalan:
When I begin a numbered-formula or a displayed formula, whenever my equation
includes at least one operator, pressing Ctrl-Enter creates a new row with 3
columns. The operator splits the 'tokens' forming the equation into 3 columns
so that opera
Am 07.01.2010 02:22, schrieb iustifico:
But if I want to do something like this:
Example 1 First Text
Example 2 Second Text
It don't seem to work. Lyx refuses to begin an new environment for Example 2.
At the end of Example 1 press RETURN, then choose "--Separator--" in the drop-down box wher
Am 07.01.2010 00:53, schrieb Matteo A.:
so i just need to delete this line
\renewcommand{\thetable}{\thechapter.\arabic{subsection}}
You also need to remove the other lines where you redefine the counters, like
for figures.
When you don't like the numbering scheme of the AMS book class, use
Am 07.01.2010 00:15, schrieb Matteo A.:
this is all i have in my preable:
\renewcommand{\thesubsection}{\thesection.\arabic{subsection}}
\renewcommand{\thetable}{\thechapter.\arabic{subsection}}
That's the bug. You redefined the table number to be the number of the subsection. So you overwri
Am 06.01.2010 18:44, schrieb Matteo A.:
When i get the lyx file as pdf file
with the buttons "updated pdf" and "view pdf" i notice a problem. Each
figure in chapter one comes out as "figure 1.1", each figure in chapter 2
comes out as "figure 2.1". so i can't distinguish them by number.
Then yo
Am 06.01.2010 13:34, schrieb Matteo A.:
I mean that when i write in lyx chapter 4-section 3(for example) and put 2
tables or figures that are numbered in lyx automatically as "table or figure
6" and "table or figure 7", then when i update the PDF, i notice that the 2
tables or figures get the sa
James C. Sutherland schrieb:
I would like to create a table that has a multirow cell in it. However, I need
to wrap the text and orient it vertically (rotated 90 degrees).
I have attached a LyX file and its associated PDF output for an example of what
I am trying to do. I cannot get the tex
R M schrieb:
I have Vista.
When I click on English on http://wiki.lyx.org/Windows/Aspell6
I told it to install the dictionary in
C:\ProgramData\Aspell\Dictionaries
Is this the right place?
On Win XP the location is
C:\Documents and Settings\\Application Data\Aspell
Use the according location
John Kane schrieb:
I simply installed ASPELL and ran a reconfigure. Spell checker seems to be
working now.
When everything you need is now working, I recommend not to touch your
installation any further.
I have noticed that I seem to be missing the phvr8t font when I try to output a
tuft
Am 20.12.2009 14:52, schrieb bb:
May be I misunderstand that sentence? My interpretation was, that
Tufte-Book is included as i. e. book(KOMA-script). Instead I find an
entry with "not available" in the list of document classes.
This is because the LaTeX-package "tufte" is not installed. To ins
Am 20.12.2009 16:17, schrieb John Kane:
I just installed Lyx on a little netbook and seem to have lost my spellchecker.
> When I spell check I recieive an error message and when I check under Tools
> -> Perfernces the spell checker panel which reads Aspell is greyed out.
That sounds bad. I ass
Am 19.12.2009 15:47, schrieb peter kint:
I looked it up .I'm on Linux/Ubuntu9.10,now for three monts.
I should use command tlmgr, right?
Right.
He tells me I havent got this command
Because Ubuntu comes with a 2 year old version of TeXLive. Things will be much easier when you
upgrade
Am 19.12.2009 00:19, schrieb peter kint:
1. Trying to install circuitikz
http://home.dei.polimi.it/mredaelli/circuitikz/index.html
to make electrical circuits in Lyx.
I get the error message : ! LaTeX Error: File `circuitikz.sty' not found.
Then the installation to LaTeX was not successful. W
Nizar BEN NEJI schrieb:
I'm using the ieeetran.cls Can someone tell how i can remove pages numbers?
Use in the document settings under "Page Layout" the headings style "empty".
regards Uwe
Bruce Pourciau schrieb:
A short document has just one footnote. Can I force the footnote symbol
to be, say, a dagger?
Sure, see sec. 4.2.1 "Footnote Numbering" of the EmbeddedObjects manual.
regards Uwe
Joachim Osnabryg schrieb:
Since sometime, when in LyX I choose File => new and then with within
the standard new document class (article), I choose Document => Options
and within the Options window, section document class, choose "Handout
(Tufte)", I get the LyX error:
Die Dokumentklasse tuf
Am 16.12.2009 19:08, schrieb Joachim Osnabryg:
in the framework of actualization of my MacTeX installation I installed
the brand actual version 3.5.0 of the tufte-latex classes from
http://code.google.com/p/tufte-latex/
Running the actual LyX example files (with the actual LyX layouts from
Uwe
Am 15.12.2009 14:45, schrieb Jose Carlos Rodríguez Rodríguez:
I work in Windows XP 3 and I need 'imperiously' to change the default
external image viewer/editor/visor (MSPaint) to another visor (irfanview)
www(dot)irfanview(dot)com).
Go to the LyX preferences and specify a viewer of your choic
Am 15.12.2009 11:50, schrieb Felix Kromarek:
Die für dieses Dokument erforderliche Fomatdatei
apa.layout
ist nicht verwendbar. Dies liegt wahrscheinlich daran,
dass eine benötigte LaTeX-Klasse oder Stil-Datei
nicht verfügbar ist. Bitte lesen Sie das Hilfe-Dokument
'Anpassung' für weitere Infor
Am 13.12.2009 15:10, schrieb Vincent van Ravesteijn:
Ok, I see some extra movement in the task bar when opening LyX, ..
that's all.
I believe that with your installer, one can really see a window popping
up (or two).
This is correct, but they are closed immediately -- takes a few milliseconds
Am 13.12.2009 14:10, schrieb Vincent van Ravesteijn:
LyX is programmed in a way that a console is always started. My and
also the standard installer hides it immediately.
The standard installer doesn't open this console window.
No, this installer does the same:
Section -Launch
# Start Ly
Murat Yildizoglu schrieb:
I can see two console windows opening each time I launch Lyx using the
bat file that has been installed by the alternative installer. They
disappear very quickly (I do not have time to read their contents).
This is how it should be.
LyX is programmed in a way that a
Philip schrieb:
Hi Is there a way to distribute Lyx and Myxtek using group policy (Windows
Server 2003)?
I don't know if this is possible because I don't have a Windows server system and never worked with
group policies. What works is when you install it as admin, choosing to install for all
Murat Yildizoglu schrieb:
I find the console window slightly annoying,
Me too but I don't get a console Window. Not on Win2000, WinXP, WinVista, Win7. Also not on 64bit
systems, and also not with an English, German, or Japanese Windows.
Do you always get this Window, also when double-clicki
Manveru schrieb:
In general, I think the standalone installer is more "clean". This is why I
prefer it. :-)
With all respect to your contribution Uwe, this is my preference too :-)
Why exactly? How can I improve a product without clear statements?
regards Uwe
Diego Queiroz schrieb:
I don't know if it is a good reason, but the alternative installer shows up
an annoying console window when it opens.
Really? This should only be visible for a few milliseconds. Only at the first start after an
installation the console Windows is shown to indicate the c
E. Kaplan schrieb:
4. I tried to redirect the output of the cmd window to a file,
Instead of this, right-click into the console window and choose "highlight". Then highlight the
whole content of the window and copy it to a text file.
Currently I haven't any clue why it doesn't work for yo
Diego Queiroz schrieb:
Someone knoes when Windows binaries for Lyx 1.6.5 will be available?
> (the standalone installer, not the alternative one)
No, but the installer doesn't matter. Both will install LyX on Windows. Or do you have a certain
reason why you don't want to use the alternative i
EK schrieb:
It still did /*not */work. The response from running:
lyx -dbg 3 was: Lyx is not recognized as an internal or external
command.. etc.
When calling
lyx -dbg 3
from the console, are you already in the folder where the lyx.exe file resides?
"Lyx is not recognized as an internal or e
Pavel Sanda schrieb:
http://wiki.lyx.org/LyX/LyXServer
shouldn't this go rather to the exiting manual for lyx server Enrico already
updated?
I don't know this manual? Where can I find it? This manual should be at least
linked to this Wiki page.
regards Uwe
Some general comments:
(1) Using LyXServer "On Windows" is at the bottom of the page whereas
using it in UNIX or OS/2 is at the top.
The Wiki is free for everyone to change it as he like. So just move it up.
regards Uwe
Anders Host-Madsen schrieb:
I have two figures of different height that I want side-by-side.
I use subfloats.
LyX (and Latex) always aligns them at the bottom edge. How
can I align them at the top edge (or center them)?
This is tricky. I found no better solution than by using a table cell for
Sergio Celani schrieb:
There any reason to not display the symbol Diamond. in the toolbar ?
There exist diamond and diamondsuit, but bot Diamond.
This is a bug that we'll fix for the next release.
Any chance to include this symbol ?
replace you version of the file sdttoolbars.inc with the
Thank you very much Siegfried!
That works with a small correction:...
Can everybody involved in this thread please do other users the favor and add to our LyX Wiki how a
LyXServer is set up on Windows?:
http://wiki.lyx.org/LyX/LyXServer
Many thanks in advance and regards
Uwe
Adam Fineberg schrieb:
I've been working in LyX and writing in Hebrew for the last week or so.
I have a problem - it seems that if I switch to English (to type in
some code),
the letters are wrong - for example, I type: "cat", and the screen
prints out "tac".
I fixed the problem by switching
Adam Fineberg schrieb:
I've been working in LyX and writing in Hebrew for the last week or so.
I have a problem - it seems that if I switch to English (to type in some
code),
the letters are wrong - for example, I type: "cat", and the screen
prints out "tac".
I fixed the problem by switching
E. Kaplan schrieb:
I installed Lyx 1.6.5 on a Windows XP laptop, using the altinstaller
(the only one I could find for Windows that had 1.6.5). Before I
installed it, I uninstalled the previous version, 1.6.4. When I try to
launch Lyx, a DOS window flashes once or twice, and disappears. Ly
Ehud Kaplan schrieb:
What causes a checkmark to appear in the Predefined checkbox in Document
Class?
This appears when the document class layout file uses dome document class
options by default.
regards Uwe
601 - 700 of 2830 matches
Mail list logo
