Just a quick query here :-)
If I want to add an additional Hard Drive to an existing mandrake 6.1 box,
can I just partition it as a single linux native partition and then will it
be detected on boot and be usable?, or is it more complicated (or simple)
than that?.
Cheers:
Michael Perry.
RD.
Season's Greetings!
I'm considering setting up little LAN in my home and, since I'm completely
inexperienced in networking, would like everyone's input regarding which NIC(s)
to choose. I am only in the planning stages and have no NICs or Hub. Here is my
situation:
1 PC dual booting L-M6.0 and
sorry but my question is not mandrake distro specific; but
just to find out if any one knows the performance difference
between squid on mandrake and netscape proxy server on NT?
thanks.
On Sun, 26 Dec 1999, you wrote:
Hi..
I'm using mandrake 6.1 and SiS 6326AGP. At first i
also have the same problem like you but i can use SVGA
server, just that certain things in the display didn't
satisfied me. I visited SuSe linux and found that they
have driver for SiS. I downloaded it
On Sun, 26 Dec 1999, you wrote:
I am having troubles with Linux not recgnizing my 128mb of ram. I added the
append RAM=128MB to my lilo.conf, but it didn't work. By the way, this is
caldera 2.3. Please help.
The line you need to add is: append 'mem=128mb'
(Including quotes.) NOT
On Mon, 27 Dec 1999, Jeremy Kersenbrock wrote:
Season's Greetings!
I'm considering setting up little LAN in my home and, since I'm completely
inexperienced in networking, would like everyone's input regarding which NIC(s)
to choose. I am only in the planning stages and have no NICs or
On Sun, 26 Dec 1999, you wrote:
but where can i get this driver again?
www.suse.com
John
On Mon, 27 Dec 1999, PC wrote:
sorry but my question is not mandrake distro specific; but
just to find out if any one knows the performance difference
between squid on mandrake and netscape proxy server on NT?
thanks.
Check squids list, they'll have a better answer.
--
MandrakeSoft
On Mon, 27 Dec 1999, you wrote:
Just a quick query here :-)
If I want to add an additional Hard Drive to an existing mandrake 6.1 box,
can I just partition it as a single linux native partition and then will it
be detected on boot and be usable?, or is it more complicated (or simple)
than
I'm running L-M6.0 and cannot compile any source code. I've been trying to get
it to work for several weeks and still haven't found all the problems. Here is
my latest problem. I'm trying to compile the source for the Spruce email
client, and here is the output of ./configure:
creating cache
I am new to linux and I have just installed
ManDrake Linux 6.1 for evaluation. I encountered the following problems
:-
1) I chosed Server Installation and I did not get
KDE environment when I start X-Windows. Is KDE package installed under Server
Installation ? How do I change the Window
On Mon, 27 Dec 1999, you wrote:
I'm running L-M6.0 and cannot compile any source code. I've been trying to get
it to work for several weeks and still haven't found all the problems. Here is
my latest problem. I'm trying to compile the source for the Spruce email
client, and here is the
On Mon, 27 Dec 1999, Jeremy Kersenbrock wrote:
I'm running L-M6.0 and cannot compile any source code. I've been trying to get
it to work for several weeks and still haven't found all the problems. Here is
my latest problem. I'm trying to compile the source for the Spruce email
client, and
I have setup Sendmail service and able to use
Microsoft Outlook Express to retrieve mail (mail sent from Mail server PC using
sendmail command) from the Mail server. However, when I try to send mail to
myself via Outlook Express(using a Windows 98 PC), the mail does get sent out
but I am
Anyone been successful at using the .profile in the shell? I've been trying
to install QT and it appears that this file isn't even touched.
Thanks,
-Jim Ockers
I prefer 3com 905 and the intel pro100. both of these are superb 10/100 pci
cards and recognized by redhat and mandrake. It is much better to build for
the future and the cost for 10 base t cards is identical or higher than the
100s.
Season's Greetings!
I'm considering setting up little
Hi,
Please, where can I find the rescue.img file.
TIA
--
Miquel Matas(Barcelona(Spain)).
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Friday, December 24, 1999 2:43 AM
Subject: [newbie] Reward offered
$5,000 Cash Reward !!!
If you can show me a better Pay Plan.
Seung-woo Nam [EMAIL PROTECTED] wrote:
I think append line should read:
append=mem=128mb
Seung-woo Nam
===
I think you need quotation marks (") following the first = and after the mb.
append="mem=128mb"
Mike
##
Michael Scottaline
Linux 2.2.13
Hi,
To my great disppointment .. I discovered that my computer is equpped with
the dreaded Win Modem that renders my linux installation useless to access
the network. Is there a workaround for this ?? Or do I have to buy a new
modem card for my box.
Thanks in advance,
Windows Hater.
Hello all,
I am in desprate need of help. I am trying to get my gateway solo 2500 on
the internet, via my pcmcia modem (xircom credit card modem (cm-56t)). I
have cardmgr installed, and all the necessary pcmcia software ( I think) but
I can't get linux to recognize my card. When I insert
On Mon, 27 Dec 1999, you wrote:
Hello all,
I am in desprate need of help. I am trying to get my gateway solo 2500 on
the internet, via my pcmcia modem (xircom credit card modem (cm-56t)). I
have cardmgr installed, and all the necessary pcmcia software ( I think) but
I can't get linux
When I installed the Mandrake 6.0 (Portuguese version) in my computer, I
have no problems with it. But today I have done un upgrade to 6.1 and
what wasn't my surprize when it started KDE shell and I didin't see the
text in the text boxes under the icons. Even in the first box (in the
startup). I
Is there a difference between XCom_SiS server and XFCom_SiS server. I
found XFCom_SiS at http://www.suse.de/en/support/xsuse/ but it doesn't
make a difference on my SiS 5597 card, I still have black boxes covering
words. Maybe because the directions they gave on the page were for
Linux-SuSE and
Hello Jeremy,
Monday, December 27, 1999, 3:32:09 PM, you wrote:
JK Here are my questions:
JK (1)What would be easier to configure in Linux, a PCI or ISA NIC? Remember, I
JK will be installing a NIC in a machine that previously had none.
PCI - that would be esear to install and it more
Hello newbie,
I have change host name in Linuxconf from Class2226 to Class226.
From that moment I got delayed initialisation of sendmail and error
measse after huge delay from httpd and SAMBA.
What's wrong?
Best regards,
Mikler mailto:[EMAIL PROTECTED]
Hello pua,
Monday, December 27, 1999, 4:30:00 PM, you wrote:
p 3) Also, I get blank screen when attempt to access the server via Windows 98 telnet
client.
As i already asked and been answered - u should wait a little bit - If
u would liketo - write the Address of ur WIn9x Comp in DNS
p For
If you want to go cheap suggest looking at something like Linksys
home network kit which works with Linux and Windows.
they come in either 10mbs or 100mbs versions and the kit is less
than $90 at Microcenter. I concur if you want to go premium the
3com 905 and Intel Pro 10/100 are both Excellent
= Original Message From [EMAIL PROTECTED] =
Bruno Maderni wrote:
Second, what is the make and model of your modem. It sounds like you
have a Winmodem. They don't work! In general any PCI modem, HCF, and a
couple of others are software (aka. Winmodems) and are designed to take
Hi,
I just upgraded from mandrake 5.3 to Mandrake 6.1. Now the backspace
key on the keyboard doesn't work. I have to use ctrl-H to delete
characters. The backspace key was working under Mandrake 5.3. How do I
get the backspace key working under Mandrake 6.1? Thanks,
Hidong
On Mon, 27 Dec 1999, you wrote:
When I installed the Mandrake 6.0 (Portuguese version) in my computer, I
have no problems with it. But today I have done un upgrade to 6.1 and
what wasn't my surprize when it started KDE shell and I didin't see the
text in the text boxes under the icons. Even
On Mon, 27 Dec 1999, you wrote:
Is there a difference between XCom_SiS server and XFCom_SiS server. I
found XFCom_SiS at http://www.suse.de/en/support/xsuse/ but it doesn't
make a difference on my SiS 5597 card, I still have black boxes covering
words. Maybe because the directions they gave
Ok, I changed the font to 100dpi and wow what an improvement.
I had to go to the /etc/X11/fs/config file with the advanced text editor and
switcheded everything that was 75 to 100 and all that was 100 to 75. Of course
you have to install the 100dpi fonts off the installation CD. Then I shut
On Mon, 27 Dec 1999, you wrote:
If you want to go cheap and PCI I suggest a S3 Virge DX/GX for
about $19 to $39 dollars depending on where you get them. I use
them with Linux all the time and they always work fine with SVGA
server. Also use S3 Virge MX in my Laptop running RH.
I am sure
"Balaji Prasad" [EMAIL PROTECTED] wrote:
Hi,
To my great disppointment .. I discovered that my computer is equpped with
the dreaded Win Modem that renders my linux installation useless to access
the network. Is there a workaround for this ?? Or do I have to buy a new
modem card for my
On Sat, 27 Nov 1999, you wrote:
I have a Modem Blaster 56K modem. When I purchased it I thought it was not a
win modem, but to my dismay now that I have installed Linux, I can't get it to
recognize my modem.
Please Advise, Jacob
This is the answer to your question:
desde cuando esto es un tianguis, un remate de ofertas..?
¿porque no guardas tus ofertas para cuando alguien te pregunte.?
Hello everybody,
Does anybody knows about an ftp program to manage downloads, resume,
pause, etc.
Something similar to getright for linux.
Thank You
Alejandro Arredondo
Joe:
I hit a brick wall trying to run the 3CCFE575BT 10/100 MHz card in my
solo2500. I could not ping any address outside my gateway. I then got
another PCMCIA card (3C589D-TP), and it flew! Worked like a champ. It
turns out the 3CCFE575BT was marginally supported.
I bet your 3c575 is in
Has anyone had problems with the first four icons on
the home folder window toolbar appearing all blurry
and distorted. When I exit X i get four error messages
about not being able to load the icons. I'm using a
mandrake 6.1 cd. Is this a video color problem or is
something wrong with the actual
On Mon, 27 Dec 1999, Alejandro Arredondo wrote:
Hello everybody,
Does anybody knows about an ftp program to manage downloads, resume,
pause, etc.
Something similar to getright for linux.
Yes. It's probably already installed. Open up a console window and (or
if already in the console) type
On Mon, 27 Dec 1999, Clifford Goodman wrote:
I've installed Linux Mandrake ver 6.1, installed a modem, and can
successfully dial my ISP using Kppp, and can ping it using Network
Utilities. When I try to bring up a web page using Netscape Navigator 4.5,
nothing happens. Any suggestions on
On Mon, 27 Dec 1999, Payne Stanifer wrote:
How do I re-run my /sbin/lilo so Linux will recognize my 128MB of RAM?
Thanks.
You get to a command line and (as root or "su") type /sbin/lilo. You
do this AFTER addingg the command
append="mem=128mb"
to the bottom of your /etc/lilo.conf.
Hi,
I just upgraded to Mandrake 6.1 from 5.3. Among the many problems I'm
having, one of the most serious is that NFS isn't working anymore. I
start NFS manually with the /etc/rc.d/init.d/nfs script. Now when I try
to run the script, I get the error:
Starting NFS
services:
So I download the mandrake61-1.iso image and burn it to a CDR (Windoze95, HP Surestore
(Adaptec rip-off) software on a Surestore 6020es) CD _looks_ ok, all the files look
like they are there (not that I would be able to tell if any were missing, just that
there are a lot of non-zero-length
On Mon, 27 Dec 1999, you wrote:
I haven't had any problems with S3 Virge I have been using
everything from RH 5.1 to Mandrake 6.0 with SVGA driver
Jeanette
Hmm...Ok. I'm using Mandrake 6.0. This Virge GX is manufactured by
Aopen. Model number is PT75 Plus II. On the box, it says the chipset
On Mon, 27 Dec 1999, you wrote:
lftp kicks ncftp's ass all up and down the block ;)
Hmm...I've been to linuxberg and FreshMeat and the closest I could
come was "GUIFTP" on FMwas that what you were referring to? If
not, could you post a url where one could download IFTP? I'd love to
give
On Mon, 27 Dec 1999, John Aldrich wrote:
On Mon, 27 Dec 1999, you wrote:
lftp kicks ncftp's ass all up and down the block ;)
Hmm...I've been to linuxberg and FreshMeat and the closest I could
come was "GUIFTP" on FMwas that what you were referring to? If
not, could you post a url
On Mon, 27 Dec 1999, Jim Ockers wrote:
Okay, thanks for the .bash_profile hints. I have successfully configured and
"make"(d) the QT Toolkit. Now trying to run through the "Hello World" tutorial.
Checked many times for syntax errors but I still get the following error
when I try to compile
Hi,
Can you pls send me the exact URL for downloading XCom_Sis server? Thanks.
Rgds
-Original Message-
From: [EMAIL PROTECTED] [EMAIL PROTECTED]
To: [EMAIL PROTECTED] [EMAIL PROTECTED]
Date: Monday, December 27, 1999 11:49 AM
Subject: Re: [newbie] sis5597
Hi..
I'm using mandrake 6.1
I believe that adding the appropriate usernames to /etc/shutdown.allow
will do the trick. If that dowsn't work, or if you want to know more,
check out the man page for "shutdown.allow".
-Matt Stegman
[EMAIL PROTECTED]
On Sun, 26 Dec 1999, Rick Bonczek wrote:
When I log in as root, I can
Hello again,
I have another question for all you linux-lovers out there. I am still
trying to get my pcmcia network card to work, and have encountered a wierd
problem. My computer will recognize my card, but in my message log, it gets
as far as seeing it and trying to get info on it (dev
John Aldrich wrote:
On Mon, 27 Dec 1999, you wrote:
lftp kicks ncftp's ass all up and down the block ;)
Hmm...I've been to linuxberg and FreshMeat and the closest I could
come was "GUIFTP" on FMwas that what you were referring to? If
not, could you post a url where one could
Make sure your dns numbers are correct
On Mon, 27 Dec 1999, you wrote:
I've installed Linux Mandrake ver 6.1, installed a modem, and can
successfully dial my ISP using Kppp, and can ping it using Network
Utilities. When I try to bring up a web page using Netscape Navigator 4.5,
nothing
Yes, you have to put this line in the lilo.conf file.
append="mem=128mb"
Then run the
/sbin/lilo
Charlotte
[EMAIL PROTECTED]
- Original Message -
From: Michael Scottaline [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, December 27, 1999 11:30 AM
Subject: Re: [Re: [newbie] Major
On Mon, 27 Dec 1999, you wrote:
On Mon, 27 Dec 1999, Alejandro Arredondo wrote:
Hello everybody,
Does anybody knows about an ftp program to manage downloads, resume,
pause, etc.
Something similar to getright for linux.
go to www.freshmeat.com and do a search on kget. The name has been
the addy www.freshmeat.net
On Mon, 27 Dec 1999, you wrote:
On Mon, 27 Dec 1999, Alejandro Arredondo wrote:
Hello everybody,
Does anybody knows about an ftp program to manage downloads, resume,
pause, etc.
Something similar to getright for linux.
Yes. It's probably already
What does /etc/fstab say your root partition is?
What does /etc/lilo.conf say it wrote to? hda7 or just hda?
[EMAIL PROTECTED] wrote:
Hi...
I have this problem.
I upgraded my kernel from kernel-2.2.13-7mdk to
kernel-2.2.13-22mdk.
But when i booted, lilo cannot find the new kernel (i
Can the win machine ping the linux box? Have you rebooted the Win
machine after the last change you made to your linux box? What does
"route -n" show?
root wrote:
alrighty i have my linux box up and running and i have configured the
windows machine my only problum is it dosent work
the
How can someone sign up for ICQ when running Linux? My niece wants to
sign up for her own account But ICQNIX doesnt support that feature. I
cant find anything on ICQ's site to let her sign up there. Any Ideas?
Hugh
--
"I haven't lost my mind -- it's backed up on tape somewhere."
Hi,
I'm having great difficulties trying to get nfs working under Mandrake
6.1. I keep getting an nfssvc not implemented error. After some
searching, I found out that I need to apply an nfs patch or get a
knfsd-compatible kernel source. Does the appropriate kernel source come
with the
I think I discovered the problem. Hinted at it the other message. My / partition
ran out of space. It got weird with signing in and some other stuff, so might have
something to do with it. A 347 Mb one isn't big enough. I've changed it to 1.2
Gb, and if that doesn't work, nothing will. I've
I remembered about using the "pipe" symbol, and got the man pages
printed. From there, I was able to locate Wine and print the README.
Haven't yet figured out the necessary .config file to make it run,
though. Maybe someday...
What I would really like to obtain (if it exists) is the Linux
Sehr geerte Damen und Herren,
ich habe zufällig Ihre Homepage gesehen
undbenutze seit einige Zeit schon SuSE
Linux 6.0. Und habe vor die neue ver. 6.3 zu erwerben. Nennen sie mirgute
Gründe Ihre Distribution zu überzeugen.
Meine momentane Hard/Softwarekonfiguration
ist:
PC:1
Pentim III
how do I add "noaccel" to my XF86Config? Thanks.
Ernesto.
John Aldrich wrote:
On Mon, 27 Dec 1999, you wrote:
Is there a difference between XCom_SiS server and XFCom_SiS server. I
found XFCom_SiS at http://www.suse.de/en/support/xsuse/ but it doesn't
make a difference on my SiS 5597
ftp://ftp.suse.com/pub/SuSE-Linux/suse_update/X/XFCom/xsis/glibc2/xsis.rpm -
this is were to download XFCom_SiS server. More info and how to install is at
http://www.suse.de/en/support/xsuse/#sis . I hope you get it to work.
Ernesto.
David Loke wrote:
Hi,
Can you pls send me the exact URL
Sounds like a lot of good hardware help here. I'd also advise doing one
of two things to learn about networking. Either get and learn all the
Network related howto's of the net, (some are more current than others
however.) The other option, and I'm doing both, is get a good text on
it. I've
Hi,
I kave a quick question. Where can I find a java runtime environment
rpm? Can I use the jre rpm on one of my SuSe disks with mandrake?
Thanks,
Sam
Sorry, late. I just get back from class
here...
www.suse.de/en
I don't where where it exact place but try search for
XCom_SiS server. I think y'll get it. Good luck!
--- [EMAIL PROTECTED] wrote:
but where can i get this driver again?
How do I re-run my /sbin/lilo so Linux will recognize my 128MB of RAM?
Thanks.
Payne
__
Get Your Private, Free Email at http://www.hotmail.com
How do I re-run my /sbin/lilo so Linux will recognize my 128MB of RAM?
1) Make sure /etc/lilo.conf is correct.
2) type '/sbin/lilo' as root and press ENTER.
71 matches
Mail list logo