- Original Message -
From: "Fabio Coatti" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, October 20, 2000 8:14 AM
Subject: Re: [newbie-it] scheda audio
On Thu, Oct 19, 2000 at 07:28:23PM +0200, [EMAIL PROTECTED] wrote:
..di tanto in tanto torno a farmi sentire...mandr7.1 non mi
ho installato la Mandrake 7.1 e desideravo
connettermi al pc tramite ftp attraverso LAN.
La macchina però rifiuta la
connessione.
Dopo una ricerca ho scoperto che manca il file
in.ftpd, come fare ad installarlo?
Ciao a tutti!
Sono un neo-pinguino, ed ho bisogno del vostro
aiuto.
Ho installato la Mandrake 7.1 (ragazzi sono
entusiasta Linux è favoloso) sul mio PC
AMD K6 200 Mhz - 32 M di ram - 2 hd così
ripartiti:
1° hd da 1,7 GB FAT32 con installato
Windows98
2° hd da 4 GB ripartito in: 2 GB fat 32
hi,
I have a question...i have included an attachment of the log i get when i do
"netstat" the thing that bothers me is the first forgein address... well and
the second one too..could someone please help me to interpret these
logs?...and if the machine is comprimised?
TiGereYe - Accept
A newbie to linux, used to pier to pier windows
networking, I just assembled a duel Pentium tower with a G586vpm motherboard.
I'm trying to install the corporate server version so I don't have to edit the
kernel to split work between the processors, I know all my hardware is
compatible.
Hello All
I know this has probably been discussed here before, but I can't find
anything that helps me.
I have @home with an SMC1211TX Ethernet Card. I have used the help files and
set it up accordingly, using drake config. It tells me that everything is
okay but will not connect. Also I have an
After setting to a new resolution I had to log off/on. But when the system
tries to enter the logon-screen, it starts flashing, and i can´t logon. So
now I cannot log-on at all! How can I get around this problem ?
Hi
Is the latest mozilla browser (M18) compatable with Flash4 plugins?
I have used the plugins that were located in my netscape plugin
directory and copied them to the mozilla plugin directory but with no luck.
Andrew
use the form netstat -ln and resend those first two lines (it they
still list)
"hackermagnet" is connected to port 1031 (a BBN port),
but port 1026 doesn't seem registered: cs7.msg.yahoo.com could be a server
at yahoo, but I don't know what it would be doing
without the IP affresses, I
In my experience, when linux sends a "siglnal 11" it'scomplaining about a
hardware failure. Are you sure you didn't forget to connect something? Or,
ist it possible something was fried with an ESD? Is it old or new
equipment?
--Greg
- Original Message -
From: "Carl Brown" [EMAIL
1. What make and model are the cards?
2. You'll probably not need to worry about setting the IRQ yourself--just
plug 'em in and use linuxconf to configure them.
I've never had to set IRQ values for NICs
--Greg
- Original Message -
From: "Saugata Das Purkayastha mt cse" [EMAIL
Um... "shutting down and rebooting" just ain't enough information for me
figure out what's gone wrong.
Please list the steps you took to configure the card, whether you happened
to use a static IP, or have cofigured pump or dhcpcd. Whether you are
activating your NIC at boot, etc.
--Greg
-
Try alt-ctrl-+ and/or alt-ctrl-- (use the ones on the numeric keypad) and
see if you can change to a lower-resolution video mode for X. Then login
and reconfigure the high resolution mode for X. It could be the monitor
selection, too. I had a NEC XV17+, but selecting that one from the list
Hallo!
I had a working bookmark to get the full list of RPMs available for
Mandrake; now it's not working 8-?
http://fr.rpmfind.net/linux/RPM/MandrakeSoft.html
Does anyone know what's it's name now??? Thanks! ;-)
--
Joan Tur. Ibiza - Spain
[EMAIL PROTECTED] [EMAIL PROTECTED] ICQ 11407395
The two ethernet cards, that I want to install are RealTek 8139. I have
used linuxconfig, to set IP addr Kernel module (which is rtl8139, in
both). But, when I start a network application, (for example NFS),
following three messages keeps on coming again and again,
eth0: Tx queue start entry 4
If defrag finds any errors during the scandisk-like mode of it (first 5%) it
wouldn't let me continue. I ran scandisk before running defrag and it
didn't do anything to my linux partition because I rebooted to linux to make
sure it still works and it worked after scandisk was run and there were
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Carroll
Grigsby
Sent: Saturday, October 21, 2000 9:42 AM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] Dupes
Greg Cobb wrote:
Is everyone getting two of the same message or is it just me? :)
Greg:
From
Paul
--
The Bible was written by the same people who said the Earth was flat.
http://nlpagan.net - ICQ 147208 - Registered Linux User 174403
-=PINE 4.21 on Linux Mandrake 7.1=-
Actually Paul, your statement is incorrect. The people that originally
wrote down everything
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of William Presho
Sent: Friday, October 20, 2000 7:47 PM
To: [EMAIL PROTECTED]
Subject: [newbie] Unable to get Cable Modem Working
Hello All
I know this has probably been discussed here before, but I can't
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Joan Tur
Sent: Saturday, October 21, 2000 11:11 AM
To: Newbie
Subject: [newbie] Full RPMs list?
Hallo!
I had a working bookmark to get the full list of RPMs available for
Mandrake; now it's not working
When I try printing something from kedit it always seems to print in the same
standard font size (12) . This happens even if I change the fontsize of the
document.
How do I get it to print in a more compressed format?
The print command used by my kedit is "enscript -2rG". What do I need to
Yes it is set up like your example. When I shut the computer down that is
when I lose the connectivity, no more Internet
What files do I have to edit
Thanks Bill
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Romanator
Sent: Saturday, October 21, 2000
The steps I took to configure the card are as follows:
Started DrakConf
Clicked on Network Configuration
Under Client Tasks tab, clicked on Basic host information
under Host name tab input the DNS Name provided to me by @Home
Under Adaptor 1 tab I set it up as follows
Config mode: Manual
Primary
it may be... and it can happen,,, that your hard drive really does have a
problem (hardware) in the boot sector. it may die tomorrow and it may last
forever if you do (or do not for that matter) "repair" it . I really got no
idea why defrag would screw with lilo.
- Original Message -
The CDRom Tray won't open when it's time to insert the extension CD. It
happened with CDRom drives that work on another PC. How do you get past this
installation process?
Brent
Get your own FREE, personal Netscape WebMail
Larry...John...Lonny and others,
I've done it! I managed to get Linux-2.4-test9 to compile and work! It's
running at the moment and it took a few times round and round to get
TCP/IP and PPP to work, but by God it's working. Now I'm curious to see if
I can get this Turtle Beach sound card working
Delay eth0 initialization Failed
Starting httpd: httpd:cannot determine local host name
Use the ServerNameDirective to set it manually Failed
The first error here usually indicates that a DHCP client failed to obtain a
lease on an IP address. Are you supposed to be configured for DHCP with
Ok...so I was a little rambunxious. The kernel IS running and I can
connect to the net through ppp, however for some odd reason I'm unable to
configure anything for ipchains. The kernel is 2.4-test9. Anyone have any
ideas as to how this can be enabled in the configuration?
--
Mark
/* I
Ok...so I was a little rambunxious. The kernel IS running and I can
connect to the net through ppp, however for some odd reason I'm unable to
configure anything for ipchains. The kernel is 2.4-test9. Anyone have any
ideas as to how this can be enabled in the configuration?
Congrats on
Hmm, your problem may be something totally different, but as a
particularly clueless newbie, I also kept finding that my network
card wouldn't connect after a reboot, although I could get it working
again in DrakConf. Turned out there's a "save configuration" button
in DrakConf that I'd never
Mark Weaver wrote:
Ok...so I was a little rambunxious. The kernel IS running and I can
connect to the net through ppp, however for some odd reason I'm unable to
configure anything for ipchains. The kernel is 2.4-test9. Anyone have any
ideas as to how this can be enabled in the
Mark Weaver wrote:
Ok...so I was a little rambunxious. The kernel IS running and I can
connect to the net through ppp, however for some odd reason I'm unable to
configure anything for ipchains. The kernel is 2.4-test9. Anyone have any
ideas as to how this can be enabled in the
hi i was wondering if there was a website that sells on cd all the latest
updates and all. I'm running version 7.1 and have only a modem to connect with
and the version of the kernel I wanna update is like 16 megs itself... thanks
for you input
Microsoft made it to destroy linux ;-)
- Original Message -
From: "DataChannel" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, October 21, 2000 5:05 PM
Subject: Re: [newbie] Windows 98 Defrag and Linux Partitions
If defrag finds any errors during the scandisk-like mode of it
NEVER, I Say NEVER, run Scandisk.
It makes more errors than i fixes.
If your PC is going slow, format the drive or delete the partition, and
install Linux again!!
Microsoft Scandisk should NEVER have been invented..!
- Original Message -
From: "DataChannel" [EMAIL PROTECTED]
To:
Hello,
I have just finished installing Madrake 7.1 on my
laptop. An ibm 380d. Everything works well excpet
2 things. There is not a driver included that
supports the 3com 3c562d network card.This is my
pcmcia card that includes a 33.6 mode. Where can I
get a driver and how do I install it?
I've just installed Mandrake 7.1
Everything seems fine and its found all my Hardware.
I can connect to my ISP OK but when I start Netscape or the mail
prog I get the message "cant find name server".
can anyone help please?
Best Wishes
[EMAIL PROTECTED]
I Am An Irrelevant , Sad Little Lunatic !
Umm... sorry to break the news to you Mark, but I think you're gonna need to
recompile again! Kernel 2.4 uses something called iptables, not ipchains.
It's a new version of the rules which enables true routing capabilities.
The 2.4 kernel DOES, however, support ipchains...but this needs to be
On Fri, 20 Oct 2000, you wrote:
Is your internal lan connected by a hub? or have you connected to the print
server directly? If you have an ethernet cable running from your PC to your
print server, you need to make sure it is a crossover cable. A
straight-through cable won't work for that
hi,
i have a parallel port ZIP drive and i want to use it under linux mandrake
7.1 . how ?
your sincerly,
Stev
You are not the only one! Its not consisent and sometimes the duplicate
messages arrive up to 24 hours later.
Anyone know why??
Rod
- Original Message -
From: "Greg Cobb" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, October 21, 2000 11:11 PM
Subject: [newbie] Dupes
Is
Hi
Just downloaded the realplayer7 from linux.tucows but ran into problems
when installing the rpm package.
The error message was:
file /usr/share/mimelnk/audio/x-wav.kdelnk from install of
RealPlayer-7.0.7 conflicts with file from package kdebase-1.1.2-61mdk
Any suggestions much
Thank you Greg. And please, don't be sorry. At least the darn thing is
compiling now and not crapping out on me. It was a real struggle there for
a while. I was just about to give up when I realized that it was actually
starting to work.
I'm a little brain-dead at the moment though as to what to
On Sat, 21 Oct 2000, you wrote:
NEVER, I Say NEVER, run Scandisk.
It makes more errors than i fixes.
If your PC is going slow, format the drive or delete the
partition, and install Linux again!!
Microsoft Scandisk should NEVER have been invented..!
never say never.
I've dual booted
Gentlemen,
I haven't had to worry with duplicate messages from the list since I
started using Pine and Procmail full time as my email client. Pine is the
reader, Procmail does the filtering, fetchmail does the mail getting from
the server. Such a nice combination. So neat...so clean...so easy.
Rod Baxter wrote:
You are not the only one! Its not consisent and sometimes the duplicate
messages arrive up to 24 hours later.
Anyone know why??
Are you using Pine? I have this problem every time I use it. It's
not that two copies are hitting the inbox, it has something to do with
how
I haven't had to worry with duplicate messages from the list since I
started using Pine and Procmail full time as my email client. Pine is the
reader, Procmail does the filtering, fetchmail does the mail getting from
the server. Such a nice combination. So neat...so clean...so easy.
Spoken
I played around with the hardware, because all but the hard drives are
old/used but working. The only thing I found that changed the error was
removing a secondary 256k cache card, then the error changes to Aiee, killer
interupt handler, kernal panic: attempted to kill the idle task! In
interrupt
NEVER, I Say NEVER, run Scandisk.
It makes more errors than i fixes.
If your PC is going slow, format the drive or delete the partition, and
install Linux again!!
Microsoft Scandisk should NEVER have been invented..!
Ouch! I wouldn't go that far. Scandisk does work well, I have had it find
As a matter of fact Larry I'm using Pine to read the mail and procmail to
filter the mail. I haven't seen a system that does it any better than
these two. The procmail filters are, in my opinion, the absolute best I've
ever used.
--
Mark
/* I never worry about the to-jams.
* Once
yeah...you do have a point there. Although I have done it in the past,
Pine doesn't do cut/paste very well at all. Attachments on the other hand
don't seem to be too bad.
Now, if I can just get this darn kernel to do what I want it to!.
--
Mark
/* I never worry about the to-jams.
*
Bernard wrote:
I've just installed Mandrake 7.1
Everything seems fine and its found all my Hardware.
I can connect to my ISP OK but when I start Netscape or the mail
prog I get the message "cant find name server".
can anyone help please?
Best Wishes
[EMAIL PROTECTED]
I Am An Irrelevant
look at your /etc/resolv.conf
You probably didn't add your ISP's DNS servers
At 10:07 PM 10/21/2000 +0100, you wrote:
I've just installed Mandrake 7.1
Everything seems fine and its found all my Hardware.
I can connect to my ISP OK but when I start Netscape or the mail
prog I get the message
Mike Tracy Holt wrote:
NEVER, I Say NEVER, run Scandisk.
It makes more errors than i fixes.
If your PC is going slow, format the drive or delete the partition, and
install Linux again!!
Microsoft Scandisk should NEVER have been invented..!
Ouch! I wouldn't go that far. Scandisk
Bob wrote:
look at your /etc/resolv.conf
You probably didn't add your ISP's DNS servers
At 10:07 PM 10/21/2000 +0100, you wrote:
I've just installed Mandrake 7.1
Everything seems fine and its found all my Hardware.
I can connect to my ISP OK but when I start Netscape or the mail
'lo all,
I'm trying to make up a shell account that I can bind an IP to
for domain names.
I have no idea where to start or where to look, can someone point
me in the right direction? (I have a bunch of IPs and I want to
be able to do reverse DNS for a few accounts, which is why I need
it to
Um..yup, I believe that cache card might be necessary. :-)
On-board IDE controller? If so, try disabling the primary IDE in the BIOS
(if possible--some BIOSes don'r allow this) and connect the (a) hard drive
the CD-ROM to the secondary IDE controller.
This very thing actually happened to my
Hello, well the subject pritty much tells u everything u need to know :P but
for if u aint read it :P does anyone know how to assign ip address's to
usernames?
thx
Lee
Lee and I are trying to figure this out, and we both thought of
the list at the same time... anyway.
Basically, I have domain names (oh.. about 120) and I have IPs
(Class C). If someone wants a shell account on my machine, and
wants to use it for irc or whatever, I'd like the reverse DNS to
yeah...you do have a point there. Although I have done it in the past,
Pine doesn't do cut/paste very well at all. Attachments on the other hand
don't seem to be too bad.
Agreed, though having to open another window to figure out the
filename I need to attach, followed by having to type in
Hi all, I was trying to set up kmail and it crashed linux. tried to
reboot and got a kernel panic. I know my /home directory is still on
the hdc6 partition and swap is still there but have no idea how to get
back to being able to boot. I tried to do a upgrade hoping to write
back the files
That's easy...you don't!
--
Mark
/* I never worry about the to-jams.
* Once I've stuck my foot in my mouth
* it's already too late...just make sure
* you chew them thoroughly before swallowing!
*/
Registered Linux user #182496
* Pine 4.21 *
So a hardware problem would be completely missed by SMART and a clean FULL
format and a thorough scandisk and a defrag that results in erasing the
linux partition?
If your controller was acting up this could easily cause such a
problem.
I would love to know how a hardware error would
Alan,
you know...I'm having a dickens of a time getting this kernel to compile
so that I can even use either iptables, or ipchains. For the life of me I
can't figure out what I'm doing wrong. How does one start the iptables, if
indeed it's even a service that "can" be started as one would start
Hi all, I was trying to set up kmail and it crashed linux. tried to
reboot and got a kernel panic. I know my /home directory is still on
the hdc6 partition and swap is still there but have no idea how to get
back to being able to boot. I tried to do a upgrade hoping to write
back the
Mark Weaver wrote:
Alan,
you know...I'm having a dickens of a time getting this kernel to compile
so that I can even use either iptables, or ipchains. For the life of me I
can't figure out what I'm doing wrong. How does one start the iptables, if
indeed it's even a service that "can" be
Greg! what were you thinking? :) Shhh...don't give away the
secret!
--
Mark
/* I never worry about the to-jams.
* Once I've stuck my foot in my mouth
* it's already too late...just make sure
* you chew them thoroughly before swallowing!
*/
I thought postfix could do pop3 and smtp? Am I wrong? Do I need a different
program to do pop3?
If so is there a rpm of a good pop3 package.
thanks
Robert
- Original Message -
From: "Romanator" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, October 21, 2000 7:43 AM
Subject: Re:
It sounds like the trouble is within your /home dir. Backup your data
files, delete your home dir, and then create a new one and move back in
and see if that helps.
--
Mark
/* I never worry about the to-jams.
* Once I've stuck my foot in my mouth
* it's already too late...just
Huh? Are we talking about the same Pine here? When I attach a file to a
message all I do in Pine is place the cursor beside the atrtachment
header, preses CTRL T which then goes to another screen within the Pine
windows already open where I can navigate to the file that I wish to
attach much like
O yeah...and something else I really like about it is that my hands never
have to leave the ksyboard when doing all this attaching.
--
Mark
/* I never worry about the to-jams.
* Once I've stuck my foot in my mouth
* it's already too late...just make sure
* you chew them
yes...I'm getting there. Slowly but surely. There's a lot of good info
connected to the links that you provided in the one message. Probably
about 3 days worth of "s-l-o-w" reading if I want it to sink in
some. :) The iptables concept sounds pretty neat so far though. Not a lot
different than
William Presho wrote:
The steps I took to configure the card are as follows:
Started DrakConf
Clicked on Network Configuration
Under Client Tasks tab, clicked on Basic host information
under Host name tab input the DNS Name provided to me by @Home
Under Adaptor 1 tab I set it up as follows
On Sat, 21 Oct 2000 22:27:42 -0400, DataChannel said:
| So a hardware problem would be completely missed by SMART and a clean FULL
| format and a thorough scandisk and a defrag that results in erasing the
| linux partition?
|
| I would love to know how a hardware error would result in only
sounds like you did everything well except to make a "boot disk" for
Linux. And why in the world do you run scandisk/defrag in safe mode?
--
Mark
/* I never worry about the to-jams.
* Once I've stuck my foot in my mouth
* it's already too late...just make sure
* you chew
Matt,
I've seen similar messages on my system...same config...
1) It just DOESN'T work from a web browser on whatever port you try...I
have long since given up
2) The VNC viewer is looking to find out what "virtual" pc to connect to
ie... xxx.xxx.xxx.xxx:1 (this is why I
76 matches
Mail list logo
