- Original Message -
From: Margot [EMAIL PROTECTED]
To: newbie@linux-mandrake.com
Subject: Re: [newbie] need help with /etc/hosts, hosts.config
resolv.configfiles
Date: Sun, 09 Jan 2005 07:30:31 +
Thank you Derek for the reply. I am really new at this network stuff. :-)
I
On Saturday 08 January 2005 09:58 pm, Scott Wagner wrote:
Hello
Today I put a third hard drive and an additional 256MB of ram (there were
already 2 256MB sticks) in my computer, after which it would not boot. I
took the new ram out and it booted ok. I took one of the original sticks
out
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Saturday 08 Jan 2005 23:09, Derek Jennings wrote:
hosts.config is not familiar to me. I do not have that file.
Mine says
order hosts,bind
multi on
This is the default as set up by Mdk 10.0 - I haven't touched it.
Anne
- --
Registered Linux
On Saturday 08 January 2005 05:24 pm, [EMAIL PROTECTED] wrote:
|Can a live cd of mandrake move be used to access the net?
|I was exploring this evening and, actually using the manual for
| lin 8.2, I sent the command cat/proc/pci as root. It was supposed
| to return an io port and irq
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 09 Jan 2005 08:21, Angus Auld wrote:
Thanks Margot. :-))
I set the adsl not to start at boot and then rebooted.
Bootup went fine, eth0 came up OK, and, ppp0 came up OK too. :-/
What's that about? When my x-session was fully loaded I also
Check out this excellent tutie on the subject:
http://www.linuxhomenetworking.com/linux-hn/network-linux.htm
It put the see in my TCP/IP.
Brett
--- Angus Auld [EMAIL PROTECTED] wrote:
Greetings, I wonder if some kind soul here could
instruct/inform me on how
I can properly config these
Hi all
Recently in attempting to compile Gimp 2.2, I urpme'd some gtk
libraries, and in doing so have broken a number of gnome-requiring
utilities (MK 10.0)
Hence the question: Does urpme log what has been uninstalled? I can't
find out what I took out so I can replace it, and didn't have
Kenneth Rhodes wrote:
On Fri, 2005-01-07 at 01:13 +0100, Kaj Haulrich wrote:
I've tried it for about a week now, and honestly, I can't tell any
difference.
Do you have Broadband? Dumb question - of course you do, but I wonder
what the variable(s) could be that enables this to work for
I understand that giving as root a command like
urpmi.addmedia thac http://rpm.nyvalls.se/10.1/RPMS/ with ./hdlist.cz
, an urpmi repository will be set up in my system,
and after that the urpmf command will hopefully be able to find, e.g.,
that the gconf-2.0.pc subpackage belongs to the
Anne Wilson wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 09 Jan 2005 08:21, Angus Auld wrote:
Thanks Margot. :-))
I set the adsl not to start at boot and then rebooted.
Bootup went fine, eth0 came up OK, and, ppp0 came up OK too. :-/
What's that about? When my x-session was
Trying to mount a share on a Win server I get the following error:
cli_negprot: SMB signing is mandatory and we have disabled it.
11846: protocol negotiation failed
SMB connection failed
How to correct this?
Want to buy your Pack or Services
On Sun, 9 Jan 2005 09:18 pm, Anne Wilson wrote:
On Sunday 09 Jan 2005 08:21, Angus Auld wrote:
Thanks Margot. :-))
I set the adsl not to start at boot and then rebooted.
Bootup went fine, eth0 came up OK, and, ppp0 came up OK too. :-/
What's that about? When my x-session was fully loaded
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 09 Jan 2005 11:09, Rodolfo Medina wrote:
I understand that giving as root a command like
urpmi.addmedia thac http://rpm.nyvalls.se/10.1/RPMS/ with ./hdlist.cz
, an urpmi repository will be set up in my system,
and after that the urpmf
On Saturday 08 January 2005 11:45 pm, [EMAIL PROTECTED] wrote:
Thanks Mikkel, I will try subscribing to the expert list and see if
someone can help.
Cy
-- [EMAIL PROTECTED] wrote:
I don't remember if the standard install offers the option, or if you
need to pick expert, but
On Sunday 09 Jan 2005 08:51, Aron Smith wrote:
On Saturday 08 January 2005 09:58 pm, Scott Wagner wrote:
Hello
Today I put a third hard drive and an additional 256MB of ram (there
were already 2 256MB sticks) in my computer, after which it would not
boot. I took the new ram out and it
Good suggestion. I prefer an external modem myself.
I think I can navigate to kppp but just in case, since I am so
newbieish, how do I get there.
I have an 8.2 boxed edition here waiting a new home with two hard
drives. I got it in case I dld 10.0.
It sounds to me that a console
On Sunday 09 January 2005 03:51 am, Aron Smith wrote:
On Saturday 08 January 2005 09:58 pm, Scott Wagner wrote:
Hello
Today I put a third hard drive and an additional 256MB of ram (there
were already 2 256MB sticks) in my computer, after which it would not
boot. I took the new ram out
On Sunday 09 January 2005 04:20 am, Anne Wilson wrote:
On Saturday 08 Jan 2005 23:09, Derek Jennings wrote:
hosts.config is not familiar to me. I do not have that file.
Mine says
order hosts,bind
multi on
This is the default as set up by Mdk 10.0 - I haven't touched it.
Anne
you might
On Sunday 09 Jan 2005 13:12, et wrote:
On Saturday 08 January 2005 11:45 pm, [EMAIL PROTECTED] wrote:
Thanks Mikkel, I will try subscribing to the expert list and see if
someone can help.
Cy
-- [EMAIL PROTECTED] wrote:
I don't remember if the standard install offers
On Sunday 09 Jan 2005 13:41, et wrote:
On Sunday 09 January 2005 03:51 am, Aron Smith wrote:
On Saturday 08 January 2005 09:58 pm, Scott Wagner wrote:
Hello
Today I put a third hard drive and an additional 256MB of ram (there
were already 2 256MB sticks) in my computer, after which
Ok 2 Kmail questions probably not related.
1, recently when I start kmail (when machine is first booted up) I get this
message box KDEInit could not kontact-Kmail.sh. Kmail stil starts up and
down loads any new mail and seems to work ok. I click ok and the error msbox
goes away. There is
Scott Wagner wrote:
Hello
Today I put a third hard drive and an additional 256MB of ram (there were
already 2 256MB sticks) in my computer, after which it would not boot. I
took the new ram out and it booted ok. I took one of the original sticks out
then to look at it make sure I had
Erylon Hines wrote:
On Saturday 08 January 2005 05:24 pm, [EMAIL PROTECTED] wrote:
|Can a live cd of mandrake move be used to access the net?
|I was exploring this evening and, actually using the manual for
| lin 8.2, I sent the command cat/proc/pci as root. It was supposed
| to return an
- Original Message -
From: Anne Wilson [EMAIL PROTECTED]
To: newbie@linux-mandrake.com
Subject: Re: [newbie] need help with /etc/hosts, hosts.config
resolv.configfiles
Date: Sun, 9 Jan 2005 10:18:27 +
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 09 Jan 2005 08:21,
Angus Auld wrote:
---[ SNIP ]
I removed ppp0 and eth0 from my configuration, and then added the
adsl ppp0 back, using MCC. Things are working OK now, except I am not
able to connect to my mail server with KMail using my new account. :-/
I wonder where
How would I go about changing the permissions to *normal* (I use
this term reservedly in my case) user for my ppp0 interface?
I'm the only user, and it's a pain to have to su to root to bring my
connection up or down.
Where do I look?
TIA.
--Angus
Let us not look back in anger or forward in
Angus Auld [EMAIL PROTECTED] wrote:
Shot in the dark - maybe things were loading in the wrong order?
Anne
Anne, I think you are on to something there. The *order* of these
devices coming up seems to be what was giving me the trouble.
Since ppp0 is just a *software* device that uses
Thanks for all the responses. Well, stupidly, I tried (actually I succeeded)
in putting a stick of DDR ram in an SDRAM slot. The system still worked
after I took it out though. This morning I disconnected all the drives, took
the ram out and cleaned the slots and replaced it and gave it an
On Sunday 09 January 2005 12:23 pm, Scott Wagner wrote:
Thanks for all the responses. Well, stupidly, I tried (actually I
succeeded) in putting a stick of DDR ram in an SDRAM slot. The system
still worked after I took it out though. This morning I disconnected all
the drives, took the ram
On Sunday 09 Jan 2005 17:23, Scott Wagner wrote:
Thanks for all the responses. Well, stupidly, I tried (actually I
succeeded) in putting a stick of DDR ram in an SDRAM slot. The system
still worked after I took it out though. This morning I disconnected all
the drives, took the ram out and
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 09 Jan 2005 17:20, et wrote:
On Sunday 09 January 2005 12:23 pm, Scott Wagner wrote:
Thanks for all the responses. Well, stupidly, I tried (actually I
succeeded) in putting a stick of DDR ram in an SDRAM slot. The system
still
I'm wondering which option is best to connect to my laptop to a digital camera
(which hasnt been chosen yet).
I thought that if I got one that supported mass storage, then it would be as
simple as mounting my mp3 player. But someone else reccommended getting one
that uses CF / SD cards and
Hello,
Since I use K3B I was never abble to burn a regular music cd that I can
play in any regular music box or car player.
The cds are playing on my computer but not even on a winBox.
What shall I setup before burning?
Thank you
Christophe
I'm sure this is a very simple question, but I have to ask it. After a
restart I have to enter the below command to get fetchmail to start polling
my isp, where do I put this command to automate the process?
[EMAIL PROTECTED] chris]$ fetchmail -m procmail
--
Chris
Registered Linux User
I'm wondering which option is best to connect to my laptop to a
digital camera (which hasnt been chosen yet).
I thought that if I got one that supported mass storage, then it
would be as simple as mounting my mp3 player. But someone else
reccommended getting one that uses CF / SD cards and
On Sunday 09 January 2005 10:00 am, John Bowden wrote:
1, recently when I start kmail (when machine is first booted up) I get this
message box KDEInit could not kontact-Kmail.sh. Kmail stil starts up and
down loads any new mail and seems to work ok. I click ok and the error
msbox goes away.
Three day old newbie.
I am verifying my hardware is linux compatible before I install 10.1
official. All hardware checks out OK except my CRT.
My CRT, ViewSonic A90f+ is a win-CRT. Does anyone know if a Linix
user has already writen conversion software or drivers? How can
I find out?
Thank
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 09 Jan 2005 15:56, mike wrote:
Scott Wagner wrote:
Hello
Today I put a third hard drive and an additional 256MB of ram (there
were already 2 256MB sticks) in my computer, after which it would not
boot. I took the new ram out and
On Sunday 09 January 2005 12:23 pm, Scott Wagner wrote:
It ran longer this time, maybe 10 seconds, then
there was a blue flash in the vicinity of the power supply and it cut off.
a! I love the smell of ozone. :)
--
/g
Want to buy your
On Sunday 09 January 2005 10:59 am, Rhein Christophe wrote:
Hello,
Since I use K3B I was never abble to burn a regular music cd that I can
play in any regular music box or car player.
The cds are playing on my computer but not even on a winBox.
What shall I setup before burning?
Thank you
On Sunday 09 Jan 2005 18:11, Greg Meyer wrote:
On Sunday 09 January 2005 10:00 am, John Bowden wrote:
1, recently when I start kmail (when machine is first booted up) I get
this message box KDEInit could not kontact-Kmail.sh. Kmail stil starts
up and down loads any new mail and seems to
I just completed a new installation of Mandrake version 10.1 power
pack. While trying to establish a internet connection the documentation
mentions wizards I can't seem to find them on my installation. Did I
miss something while installing? Or are wizards a add on feature?
Thanks,
Owen
No there is no problem with the players because I use cds burned with
windows Nero.
I just used K3B and used make a cd copy.
What is the proper setup to burn .wav files?
Because when I use the automatic burning mode I can not use the music cd
on a regular cd player
Thank you
Chrtistophe
Le
On Friday 07 January 2005 04:53 pm, Miark wrote:
On Thu, 6 Jan 2005 18:44:12 -0600, David wrote:
I've tried it for about a week now, and honestly, I can't tell any
difference. Besides, my conscience forbids me to send 30 request
to a server in order to get one page. There's enough
Andy Yankovich ([EMAIL PROTECTED]) wrote:
Three day old newbie.
I am verifying my hardware is linux compatible before I install 10.1
official. All hardware checks out OK except my CRT.
My CRT, ViewSonic A90f+ is a win-CRT. Does anyone know if a Linix
user has already writen conversion
On Sunday 09 Jan 2005 22:38, JR wrote:
I'm wondering which option is best to connect to my laptop to a digital
camera (which hasnt been chosen yet).
I thought that if I got one that supported mass storage, then it would be
as simple as mounting my mp3 player. But someone else reccommended
On Sunday 09 January 2005 11:31 am, Rhein Christophe wrote:
No there is no problem with the players because I use cds burned with
windows Nero.
I just used K3B and used make a cd copy.
What is the proper setup to burn .wav files?
Because when I use the automatic burning mode I can not use the
On Sun, 09 Jan 2005 12:20:46 -0500
et [EMAIL PROTECTED] wrote:
starting it to see if there was any difference. It ran longer this time,
maybe 10 seconds, then there was a blue flash in the vicinity of the power
supply and it cut off. Oh well, I think this one is beyond me.
Thanks,
SW
On January 9, 2005 01:30 pm, Owen wrote:
I just completed a new installation of Mandrake version 10.1 power
pack. While trying to establish a internet connection the
documentation mentions wizards I can't seem to find them on my
installation. Did I miss something while installing? Or are
On Sunday 09 Jan 2005 18:47, J or M Montgomery wrote:
On Sun, 09 Jan 2005 12:20:46 -0500
et [EMAIL PROTECTED] wrote:
starting it to see if there was any difference. It ran longer this
time, maybe 10 seconds, then there was a blue flash in the vicinity of
the power supply and it cut
Thanks RickS
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http://www.mandrakeclub.com
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 09 Jan 2005 22:38, JR wrote:
I'm wondering which option is best to connect to my laptop to a digital
camera (which hasnt been chosen yet).
I thought that if I got one that supported mass storage, then it would be
as simple as mounting
Most popular name camers support mass storage (a few use
proprietary formats, like Kodak's). As long as they write to a
common format storage medium - CF/SD/SM or whatever - you have the
option of going to a card reader later.
I may have mis-used mass strage.
What do you call a usb camera
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 09 Jan 2005 19:57, Eric Huff wrote:
Most popular name camers support mass storage (a few use
proprietary formats, like Kodak's). As long as they write to a
common format storage medium - CF/SD/SM or whatever - you have the
option of
Anne Wilson wrote:
On Sunday 09 Jan 2005 15:56, mike wrote:
Scott Wagner wrote:
Hello
Today I put a third hard drive and an additional 256MB of ram (there
were already 2 256MB sticks) in my computer, after which it would not
boot. I took the new ram out and it booted ok. I took one of the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 09 Jan 2005 19:57, Eric Huff wrote:
Most popular name camers support mass storage (a few use
proprietary formats, like Kodak's). As long as they write to a
common format storage medium - CF/SD/SM or whatever - you have the
option of
On Sunday 09 January 2005 08:15 am, Mikkel L. Ellertson wrote:
|odem.
|
| Are 2.6.x kernels different in this then the 2.4.x kernels? I have used
| the same driver for 4 different kernels on my laptop. The RPM with the
| drivers added a directory off the modules directory for the version of
| the
I'm having a problem with xmms skipping while playing streaming audio and
browsing with mozilla. I also notice this happening when switching between
folders in Kmail, I have Kmail running standalone not with Kontact. I've
attempted to change the nice setting for xmms to -10 but can't seem to
Forgive me, I got rambunctious with the delete key so I have no reference
post.
for kppp, you probably need to install it:
urpmi kdenetwork
or
urpmi kdenetwork-kppp
would be the commands.
You can change the colors for the terminal screen from the settingsconfigure
consoleschema menu at the
Chris wrote:
I'm sure this is a very simple question, but I have to ask it. After a
restart I have to enter the below command to get fetchmail to start polling
my isp, where do I put this command to automate the process?
[EMAIL PROTECTED] chris]$ fetchmail -m procmail
One place would be
On Sunday 09 January 2005 02:38 pm, JR wrote:
| I'm wondering which option is best to connect to my laptop to a digital
| camera (which hasnt been chosen yet).
|
| I thought that if I got one that supported mass storage, then it would be
| as simple as mounting my mp3 player. But someone else
On Sunday 09 January 2005 12:04 pm, Chris wrote:
| I'm having a problem with xmms skipping while playing streaming audio and
| browsing with mozilla. I also notice this happening when switching between
| folders in Kmail, I have Kmail running standalone not with Kontact. I've
| attempted to
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 09 Jan 2005 20:32, Erylon Hines wrote:
Any camera that uses the USB Mass Storage protocol is absolutely the way
to go. Stay away (far-far away) from any other protocol. USB Mass Storage
will be recognized as any other usb drive when
On Sun, 9 Jan 2005 10:46:13 -0800
Aron Smith [EMAIL PROTECTED] wrote:
Assuming you are starting a new project each time
go toFile select Newproject --audio CD project
Then drag and drop the .wav files into the box below
(at least that's how it works for me)
Hope this helps
But if he is
On Sunday 09 January 2005 10:59 am, Rhein Christophe wrote:
| Hello,
| Since I use K3B I was never abble to burn a regular music cd that I can
| play in any regular music box or car player.
| The cds are playing on my computer but not even on a winBox.
| What shall I setup before burning?
| Thank
Most popular name camers support mass storage (a few use
proprietary formats, like Kodak's). As long as they write to
a common format storage medium - CF/SD/SM or whatever - you
have the option of going to a card reader later.
What do you call a usb camera (or any device) that
I meant that he could mount as a mass-storage device at first and
buy a card reader later if he wants to. My daughter's Kodak,
however, can't be used as a mass storage device, but can be
mounted with gphoto. (I haven't tried Digikam)
If you do try digikam, and you don't see files you
Any camera that uses the USB Mass Storage protocol is absolutely
the way to go. Stay away (far-far away) from any other protocol.
USB Mass Storage will be recognized as any other usb drive when
you plug the camera into your Linux box, and probably you will get
an icon popping up for it on
I'm having a problem with xmms skipping while playing streaming audio and
browsing with mozilla. I also notice this happening when switching between
folders in Kmail, I have Kmail running standalone not with Kontact. I've
attempted to change the nice setting for xmms to -10 but can't seem to
Hello,
I have a other problem with MDK 10.1. I can not watch DVDs with Totem
and Caffeine. I have installed libdvdcss2 but with no success.
Is there something to modify in the configuration?
Thank you
Christophe
Want to buy your Pack or
On Sunday 09 January 2005 04:45 pm, Eric Huff wrote:
Any camera that uses the USB Mass Storage protocol is absolutely
the way to go. Stay away (far-far away) from any other protocol.
USB Mass Storage will be recognized as any other usb drive when
you plug the camera into your Linux box,
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 09 Jan 2005 23:27, Rhein Christophe wrote:
Hello,
I have a other problem with MDK 10.1. I can not watch DVDs with Totem
and Caffeine. I have installed libdvdcss2 but with no success.
Is there something to modify in the configuration?
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 09 Jan 2005 21:42, Eric Huff wrote:
I meant that he could mount as a mass-storage device at first and
buy a card reader later if he wants to. My daughter's Kodak,
however, can't be used as a mass storage device, but can be
mounted
Chris ([EMAIL PROTECTED]) wrote:
I'm sure this is a very simple question, but I have to ask it. After a
restart I have to enter the below command to get fetchmail to start polling
my isp, where do I put this command to automate the process?
[EMAIL PROTECTED] chris]$ fetchmail -m procmail
Andy Yankovich ([EMAIL PROTECTED]) wrote:
I appologize if contacting you directly is not allowed by list rules.
Should this have been sent to the list?
No its ok, but it could help someone else, another newbie, never
know. Always good to ask 8) So I sent it to the list and cc'd you.
Where did
Hi all- every time I try to send an email in Evolution I get an error: RCPT
TO: email address: mailbox is unavailable. I've tried to send to
mailboxes I know are available, including mine. I can reboot into WinXP and
send through my Earthlink mailserver just fine. I've removed my connection,
and
Thanks Dan,
That did it. It also solved my connection problem.
Owen
At 11:13 AM 1/9/2005, you wrote:
On January 9, 2005 01:30 pm, Owen wrote:
I just completed a new installation of Mandrake version 10.1 power
pack. While trying to establish a internet connection the
documentation mentions
Hello everyone!
I´m new to linux and I have installed Mdk 10.1 last week. And I have a
winmodem and I can't make it work on my new system, I have searched
all the web for information but I just got so confused, my modem's
chipset is Conexant Hsfi cx 11252-11; I have tried many drivers but
they
- Original Message -
From: Ana Paula Samodossi [EMAIL PROTECTED]
To: newbie@linux-mandrake.com
Subject: [newbie] winmodems
Date: Sun, 9 Jan 2005 18:41:40 -0600
Hello everyone!
I´m new to linux and I have installed Mdk 10.1 last week. And I have a
winmodem and I can't make it work
- Original Message -
From: Angus Auld [EMAIL PROTECTED]
To: newbie@linux-mandrake.com
Subject: Re: [newbie] winmodems
Date: Sun, 09 Jan 2005 22:02:52 -0300
- Original Message -
From: Ana Paula Samodossi [EMAIL PROTECTED]
To: newbie@linux-mandrake.com
Subject: [newbie]
On Sun, 09 Jan 2005 22:09:10 -0300, Angus Auld [EMAIL PROTECTED] wrote:
If you are unable to get your winmodem to work, there are hardware modems
available, some reasonably priced. They are OS independent, and will work.
I think is the best choice, Im getting bored of winbugs and its
On January 9, 2005 07:03 pm, Owen wrote:
Thanks Dan,
That did it. It also solved my connection problem.
You are welcome, glad I could help.
Regards,
Dan Gordon
--
Sun Jan 9 21:14:50 EST 2005
21:14:50 up 3 days, 1:18, 1 user, load average: 0.17, 0.06, 0.01
No one so thoroughly
Ok, thank you all guys for helping me! I´ll try to install a linuxant
driver, I hope it work!! Anyway I´m interested in buying a new hdw
modem. Thanks a lot!! :)
--
Saludos from Mexico.
Want to buy your Pack or Services from MandrakeSoft?
Go
On Sunday 09 January 2005 03:36 pm, Erylon Hines wrote:
On Sunday 09 January 2005 12:04 pm, Chris wrote:
| I'm having a problem with xmms skipping while playing streaming audio and
| browsing with mozilla. I also notice this happening when switching
| between folders in Kmail, I have Kmail
I'd like a simple commandline or GUI app to limit
outgoing bandwidth from my FTP server. Any suggestions?
Miark
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club :
On Sunday 09 January 2005 08:57 pm, Miark wrote:
I'd like a simple commandline or GUI app to limit
outgoing bandwidth from my FTP server. Any suggestions?
Miark
Hi Miark. I assume from your posts on the expert list that you're running
ProFTPd. With that being the case, you're going to need
On Sun, 9 Jan 2005 21:39:03 -0600, Randall wrote:
On Sunday 09 January 2005 08:57 pm, Miark wrote:
I'd like a simple commandline or GUI app to limit
outgoing bandwidth from my FTP server. Any suggestions?
Miark
Hi Miark. I assume from your posts on the expert list that you're running
Rodolfo Medina wrote:
I understand that giving as root a command like
urpmi.addmedia thac http://rpm.nyvalls.se/10.1/RPMS/ with ./hdlist.cz
, an urpmi repository will be set up in my system,
and after that the urpmf command will hopefully be able to find, e.g.,
that the gconf-2.0.pc subpackage
88 matches
Mail list logo
