--
Dennis Robertson 2/2 Sylvia Street NOOSAVILLE QLD 4566 AUSTRALIA
Phone: 61 7 54742343 Mobile: 0419 535539 Fax: Phone for setup.
--
Dennis Robertson 2/2 Sylvia Street NOOSAVILLE QLD 4566 AUSTRALIA
Phone: 61 7 54742343 Mobile: 0419 535539 Fax: Phone for setup.
John Couturier wrote:
I don't know the answer the your problem but you may want to go out to
http://geheimnis.sourceforge.net and try geheimnis
I am trying to run gnupg with the gpgp gui front end in L-M7.0. When I
try to decrypt with gpgp I get the error message:
gpg: cannot open /dev/tty: Device not configured
Gnupg works fine in a term.
I cannot find any info on configuring /dev/tty. Can anyone assist?
TIA.
--
Dennis Robertson 2/2
le to
id:5:initdefault if you want to routinely start X on bootup. Good luck.
--
Dennis Robertson 2/2 Sylvia Street NOOSAVILLE QLD 4566 AUSTRALIA
Phone: 61 7 54742343 Mobile: 0419 535539 Fax: Phone for setup.
PROTECTED]
http://fox.mit.edu/skunk/xwin/
--
Dennis Robertson 2/2 Sylvia Street NOOSAVILLE QLD 4566 AUSTRALIA
Phone: 61 7 54742343 Mobile: 0419 535539 Fax: Phone for setup.
it).
Has anyone any ideas to help me run v4 other than "buy a better card"?
Thanks.
__
Get Your Private, Free Email at http://www.hotmail.com
I have it fixed, thanks. Thanks for your copy of XF86Config.
--
Dennis Robertson 2/2
but when I restarted X , I received an error message stating
there
was no executable for the program---where did I go wrong?
Thanks for your help
Thanks from me too.
--
Dennis Robertson 2/2 Sylvia Street NOOSAVILLE QLD 4566 AUSTRALIA
Phone: 61 7 54742343 Mobile: 0419 535539 Fax: P
Vic wrote:
Yes sir, the bloody make menuconfog will not even run
Vic,
I just recompiled once more and seem to have finally eliminated my kppp
error message. I have not used make menuconfig but make xconfig works
fine. Sorry I can't help with your problem.
--
Dennis Robertson 2/2 Sylvia
or xconfig?
Try again and good luck.
--
Dennis Robertson 2/2 Sylvia Street NOOSAVILLE QLD 4566 AUSTRALIA
Phone: 61 7 54742343 Mobile: 0419 535539 Fax: Phone first for setup.
f possible.
Thanks.
--
Dennis Robertson 2/2 Sylvia Street NOOSAVILLE QLD 4566 AUSTRALIA
Phone: 61 7 54742343 Mobile: 0419 535539 Fax: Phone first for setup.
Moscow, ID 83843
=+===
Have you configured netscape in edit-preferences so it knows where to
look?
--
Dennis Robertson 2/2 Sylvia Street NOOSAVILLE QLD 4566 AUSTRALIA
Phone: 61 7 54742343 Mobile: 0419 535539 Fax: Phone first
to mount the cd but is unable to see it in linux, whereas
he can in Windows.
TIA.
--
Dennis Robertson 2/2 Sylvia Street NOOSAVILLE QLD 4566 AUSTRALIA
Phone: 61 7 54742343 Mobile: 0419 535539 Fax: Phone first for setup.
.
Get your own FREE, personal Netscape WebMail account today at
http://webmail.netscape.com.
Dennis Robertson - [EMAIL PROTECTED]
2/2 Sylvia Street Noosaville QLD 4566 Australia
PH/FAX: 61 7 5474 2343 - Phone before sending fax.
,
If you read the archives about 2 weeks ago, or so, you will see that
Axalon helped me do this.
Regards.
--
Dennis Robertson 2/2 Sylvia Street NOOSAVILLE QLD 4566 AUSTRALIA
Phone: 61 7 54742343 Mobile: 0419 535539 Fax: Phone first.
should get SO 5.1a which does not need to be registered. SO 5.1
will not be supported with patches and upgrades.
Regards.
--
Dennis Robertson 2/2 Sylvia Street NOOSAVILLE QLD 4566 AUSTRALIA
Phone: 61 7 54742343 Mobile: 0419 535539 Fax: Phone first.
://webmail.netscape.com.
Same here.
--
Dennis Robertson 2/2 Sylvia Street NOOSAVILLE QLD 4566 AUSTRALIA
Phone: 61 7 54742343 Mobile: 0419 535539 Fax: Phone first.
Michael Scottaline wrote:
Dennis Robertson [EMAIL PROTECTED] wrote:
BTW nice image - how do you do that?
Regards.
--
Dennis Robertson 2/2 Sylvia Street NOOSAVILLE QLD 4566 AUSTRALIA
Phone: 61 7 54742343 Mobile: 0419 535539 Fax: Phone first
ause I
still have that setup in KDE. Wouldn't you think this would be resolved
before distros were supplied to users?
HTH.
--
Dennis Robertson 2/2 Sylvia Street NOOSAVILLE QLD 4566 AUSTRALIA
Phone: 61 7 54742343 Mobile: 0419 535539 Fax: Phone first.
nstall. I dunno what is going on. Thanks.
| --
| Dennis Robertson 2/2 Sylvia Street NOOSAVILLE QLD 4566 AUSTRALIA
| Phone: 61 7 54742343 Mobile: 0419 535539 Fax: Phone first.
Appologies, I mis understood. Look in the untar'd distribution for the SO51a
installe
Axalon Bloodstone wrote:
On Mon, 20 Dec 1999, Dennis Robertson wrote:
[..]
My question is how do I revert my system to full -7 kernel operation
without -22 interference? I would not like to do yet another install!
Thanks for any help.
mount /mnt/cdrom # mount the original cdrom
cd
"Ernest N. Wilcox Jr." wrote:
On Sat, 18 Dec 1999, Dennis Robertson wrote:
| Hello List,
|
| Well this is really strange. I have 5.1a for Windows and it connects,
| downloads email and browses no problem. Apart from some minor cosmetic
| improvements it look
for Linux. I am just not connecting somehow.
Thanks.
--
Dennis Robertson 2/2 Sylvia Street NOOSAVILLE QLD 4566 AUSTRALIA
Phone: 61 7 54742343 Mobile: 0419 535539 Fax: Phone first.
Dennis Robertson wrote:
Frank Arnold wrote:
Autostart
Look inside the folders in Autostart and you will find lots
of icons for applications that are not on your desktop.
Like to have one or more on the desktop?
Drab it from autostart to the desktop and select "Copy&qu
Alan Shoemaker wrote:
Dennis Robertson wrote:
snip
I tried your excellent template suggestion to create an icon for
midnight commander. I got as far as an icon that opens konsole but I
can't get mc to start. Could you elaborate for a newbie, please. Also,
I can't get the Autostart
performance to WinFax or is
there a better option?
TIA.
--
Dennis Robertson 2/2 Sylvia Street NOOSAVILLE QLD 4566 AUSTRALIA
Phone: 61 7 54742343 Mobile: 0419 535539 Fax: Phone first.
on that opens konsole but I
can't get mc to start. Could you elaborate for a newbie, please. Also,
I can't get the Autostart directory to open; instaed I get the error:
The config file has no "Type=..." line. Can you help, please?
Regards,
--
Dennis Robertson 2/2 Sylvia Street
screwed up doing that. Can anyone help? ( I am posting
to this list because I feel it is not an SO-specific problem.)
Thanks.
--
Dennis Robertson 2/2 Sylvia Street NOOSAVILLE QLD 4566 AUSTRALIA
Phone: 61 7 54742343 Mobile: 0419 535539 Fax: Phone first.
? You need to put a server/host in there, such as
"time.nist.gov" The server, time.nist.gov, is the atomic
clock in Colorado. The command line would be (minus the
quotes) "rdate -sp time.nist.gov"
It works here...
John
John,
I got it to work as user, thanks. I
nterpreter I'll be seeing this week to
correct any problems. Thanks, John, for spotting the deliberate error
with /dev/floppy for /dev/fd0(which of course I had to use.)
Thanks again.
--
Dennis Robertson 2/2 Sylvia Street NOOSAVILLE QLD 4566 AUSTRALIA
Phone: 61 7 54742343 Mobile: 0419 535539 Fax: Phone first.
Axalon Bloodstone wrote:
On Mon, 29 Nov 1999, Dennis Robertson wrote:
Hello list,
I have been absent during a re-install of L-M6.1 to try to cure my
problem with kppp disabling my desktop. I decided to go for broke and
updated the kernel etc with the Mandrake update function
.
--
Dennis Robertson 2/2 Sylvia Street NOOSAVILLE QLD 4566 AUSTRALIA
Phone: 61 7 54742343 Mobile: 0419 535539 Fax: Phone first.
the
prompt and type startx. It should work. If not go back into mc and try
another modeline.
A friend showed me how to do this when I was about to abandon Linux.
Good luck.
--
Dennis Robertson 2/2 Sylvia Street NOOSAVILLE QLD 4566 AUSTRALIA
Phone: 61 7 54742343 Mobile: 0419 535539 Fax: Phone first.
alias sound opl3sa2
pre-install sound insmod sound dmabuf=1
alias midi opl3
options opl3 io=0x388
options opl3sa2 mss_io=0x530 irq=5 dma=0 dma2=7 mpu_io=0x388 io=0x370
HTH
--
Dennis Robertson 2/2 Sylvia Street NOOSAVILLE QLD 4566 AUSTRALIA
Phone: 61 7 54742343 Mobile: 0419 535539 Fax: Phone first.
the new kernel to the old boot disk?
Thanks for any help.
--
Dennis Robertson 2/2 Sylvia Street NOOSAVILLE QLD 4566 AUSTRALIA
Phone: 61 7 54742343 Mobile: 0419 535539 Fax: Phone first.
de to
open, say, Netscape or once I have used Kppp I can no longer use icons
(including Kppp itself) after disconnect.
Has anyone a cure short of full reinstall of M6.1, which I really would
prefer not to do?
Thanks.
--
Dennis Robertson 2/2 Sylvia Street, NOOSAVILLE, QLD, 4566, AUSTRALIA
P
Sean Armstrong wrote:
Dennis Robertson wrote:
Sean Armstrong wrote:
Hello Blackbox Users,
I was impressed by the supporting comments for blackbox, so I installed
it with KDE enabled.
Here is the dumb question. I read the install and run notes but nothing
tells me
guess "some support"= not very much since I can't find the files
needed. She who must be obeyed says it's my present scanner or nothing!
Thanks.
--
Dennis Robertson 2/2 Sylvia Street, NOOSAVILLE, QLD, 4566, AUSTRALIA
Phone: 61 7 54742343 Mobile: 0419 535539 Fax: Phone first.
n sc600 as well) that simply not adding the 0 to lp
during install provided a fix. I think there is a setup error that says
a printer is detected at lp0 but then looks for it at lp. But then I am
an absolute newbie so take that with a grain of salt.
Good luck.
--
Dennis Robertson 2/2 Sylvia Str
Steve,
I have tried all possible combinations of IP, DNS and Gateway entries in
Kppp and still find that the panel and desktop icons do not work after
using Kppp. Is there anything else I can try, please?
Thanks.
--
Dennis Robertson 2/2 Sylvia Street, NOOSAVILLE, QLD, 4566, AUSTRALIA
Phone
which should be in /usr/local/lib/, /usr/local//etc/sane.d/ and
/usr/local/man/ do not exist. GIMP cannot see the scanner.
Can anyone tell me what to do from here ( to get my scanner working,
that is ), please?
TIA.
--
Dennis Robertson 2/2 Sylvia Street, NOOSAVILLE, QLD, 4566, AUSTRALIA
not worked or am I missing something obvious?
Please be kind.
--
Dennis Robertson 2/2 Sylvia Street, NOOSAVILLE, QLD, 4566, AUSTRALIA
Phone: 61 7 54742343 Mobile: 0419 535539 Fax: Phone first.
I just changed my Xclients file to read:
#!/bin/bash
kpanel
kfm -d
/usr
with SO5.1 (Sun version) for Windoze. Maybe your experience
will be different - I hope so.
Regards.
--
Dennis Robertson 2/2 Sylvia Street, NOOSAVILLE, QLD, 4566, AUSTRALIA
Phone: 61 7 54742343 Mobile: 0419 535539 Fax: Phone first.
Warren Doney wrote:
Dennis Robertson wrote:
Steve,
I have tried all possible combinations of IP, DNS and Gateway entries in
Kppp and still find that the panel and desktop icons do not work after
using Kppp. Is there anything else I can try, please?
Thanks.
--
Dennis
not to use Windoze.
Regards.
--
Dennis Robertson 2/2 Sylvia Street, NOOSAVILLE, QLD, 4566, AUSTRALIA
Phone: 61 7 54742343 Mobile: 0419 535539 Fax: Phone first.
Steve,
Thanks for advice about KPPP. When I checked the option was disabled so
I enabled it to see if that works.
Regards.
--
Dennis Robertson 2/2 Sylvia Street, NOOSAVILLE, QLD, 4566, AUSTRALIA
Phone: 61 7 54742343 Mobile: 0419 535539 Fax: Phone first.
something obvious?
Please be kind.
--
Dennis Robertson 2/2 Sylvia Street, NOOSAVILLE, QLD, 4566, AUSTRALIA
Phone: 61 7 54742343 Mobile: 0419 535539 Fax: Phone first.
Thanks to all who pointed me to man lprm etc. Next time I'll know.
Regards.
--
Dennis Robertson 2/2 Sylvia Street, NOOSAVILLE, QLD, 4566, AUSTRALIA
Phone: 61 7 54742343 Mobile: 0419 535539 Fax: Phone first.
Steve Philp wrote:
Dennis Robertson wrote:
Hello All,
Every now and then the icons in the panel cease to work - I click on
them, they appear to work but nothing happens. I have to restart X to
get them to work again. Anyone any ideas on how to fix this? Thanks.
Did you happen
the job from the queue. I am asked are you sure?
and on responding yes nothing happens and printing continues. I have
switched the printer off but it cranks up the same job when restarted.
I am very pleased to be able to print but does anyone know how to stop
it mid-process?
Thanks.
--
Dennis
Here is a real newbie question. When I click on K and scroll to
Utilities I get a list that exceeds the max height of the screen. It
shows from A at the top to P at the bottom. How do I access utilities
at the bottom which are off the screen; ie those from Q to Z?
Thanks.
--
Dennis Robertson
$* | lpr
He says to put this in/usr/local/bin or $HOME/bin.
Good luck.
--
Dennis Robertson 2/2 Sylvia Street NOOSAVILLE QLD 4566 AUSTRALIA
Phone: 61 7 54742343 Mobile: 0419 535539 Fax: Phone first.
task.
Please check the mail archive for further discussion and other work-arounds.
HTH,
Matt
From: Dennis Robertson [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: [newbie] Utilities
Date: Sun, 14 Nov 1999 10:27:02 +
Here is a real newbie question.
Hello All,
Every now and then the icons in the panel cease to work - I click on
them, they appear to work but nothing happens. I have to restart X to
get them to work again. Anyone any ideas on how to fix this? Thanks.
--
Dennis Robertson 2/2 Sylvia Street NOOSAVILLE QLD 4566 AUSTRALIA
hope someone does. Why should it be so difficult? Linux will
never fly if, as in my case, essential tasks can only be done in
Windows.
Thanks in advance.
-
Dennis Robertson 2/2 Sylvia Street NOOSAVILLE QLD 4566 AUSTRALIA
Phone: 61 7 54742343 Mobile: 0419 535539 Fax: Phone first.
54 matches
Mail list logo