...
To declare an alias for root edit /etc/postfix/aliases and at the
bottom it
tells you to define the local user to be an alias for root. Insert
your user
name there and then as root run 'newaliases' and restart postfix with
'service postfix restart'
You will then get the mail for
On Thursday 09 September 2004 12:50, Harald T ZIPKO wrote:
...
To declare an alias for root edit /etc/postfix/aliases and at the
bottom it
tells you to define the local user to be an alias for root. Insert
your user
name there and then as root run 'newaliases' and restart postfix with
Thank you for your hints and suggestions - I will try them asap ;-)
--
(o Best regards
//\Harald T ZIPKO
V_/_
please no html - mails
--
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join
I am trying to setup up a script to send a mail as a cron job.
I have sendmail running, and can telnet 25 and send mail out, but i
can't get mail or mhmail to work.
mail -d -s ler [EMAIL PROTECTED] ~/twiki.txt
and
mhmail -subject Ler -from wre [EMAIL PROTECTED] [EMAIL PROTECTED]
On Sat, Oct 18, 2003 at 07:59:39AM -0700, Eric Huff wrote:
I am trying to setup up a script to send a mail as a cron job.
I have sendmail running, and can telnet 25 and send mail out, but i
can't get mail or mhmail to work.
mail -d -s ler [EMAIL PROTECTED] ~/twiki.txt
I assume in these
I am trying to setup up a script to send a mail as a cron job.
I have sendmail running, and can telnet 25 and send mail out,
but i can't get mail or mhmail to work.
mail -d -s ler [EMAIL PROTECTED] ~/twiki.txt
I assume in these examples [EMAIL PROTECTED] is just an example, and
1. Any preferences?
2. A few months ago, I couldn't get through sympa to the list. I was led to believe
there was a problem at my host with DNS.
I am about to tackle a mail server but my ip is subject to change by comcast at will.
No-ip.com will handle the resolution within a few minutes,
* Arwan - ha scritto:
Famme vede'... in .muttrc non c'e'. In /etc/mutt/Muttrc c'e' questo.
# set envelope_from=no
con tanto di commento davanti.
Allora coincide, se in .muttrc non c'è e non è settato di default
in /etc/Muttrc, pure da me è così, strano invece che Syd lo ha
invece settato
Deve aver avuto molto sonno, perche' il lunedì 21 luglio 2003, alle 10:18, Giuseppe
Ferruzzi ha scritto:
Poi usi con sendmail submit.cf o sendmail.cf ?
... ho fatto provve con entrambi, ma alla fine non
ricordo cosa ho scelto... Dove posso controllare per darti l'informazione?
Qui
Deve aver avuto molto sonno, perche' il sabato 19 luglio 2003, alle 21:08, Giuseppe
Ferruzzi ha scritto:
Rieccomi qui syd, ho ripreso la configurazione di sendmail dopo che la
telecom finalmente ha sostituito la linea telefonica aerea guastata.
Credo che Syd sia in ferie... e io non saprei
* Arwan - ha scritto:
Deve aver avuto molto sonno, perche' il sabato 19 luglio 2003, alle 21:08,
Giuseppe Ferruzzi ha scritto:
Rieccomi qui syd, ho ripreso la configurazione di sendmail dopo che la
telecom finalmente ha sostituito la linea telefonica aerea guastata.
Credo che Syd sia
Deve aver avuto molto sonno, perche' il domenica 20 luglio 2003, alle 11:23, Giuseppe
Ferruzzi ha scritto:
Però potrai dirmi se nel file di configurazione .muttrc hai settato
envelope_from=yes o se invece non ce l'hai proprio e magari lo hai
settato di default con yes in /etc/Muttrc, sapere
Rieccomi qui syd, ho ripreso la configurazione di sendmail dopo che la
telecom finalmente ha sostituito la linea telefonica aerea guastata.
Dopo varie prove con l'ausilio delle tue informazioni riguardo alla
ultima versione di sendmail, mi sembra di aver risolto l'errore causato
dal comando
On Wed, Jul 02, 2003 at 05:41:58PM +1000, Stephen Kuhn wrote:
Does anyone have a clue as to how to get ClamAV's milter to append a
message to each outbound email to state it's been scanned? (Egads...that
means my sig would be even bigger!)(g)
Can't answer your question, but I've a need to
On Fri, 2003-07-04 at 06:37, Todd Slater wrote:
Can't answer your question, but I've a need to perhaps scan email
passing through postfix. How hard was it to set up ClamAV to scan email?
Todd
Didn't take but about 10 minutes - and that was with reading the
installation documentation; was
* Luigi Pinna ha scritto:
No, il problema è che voglio che consegni i contenuti dei vari server
pop in cartelle diverse dello spool!
Da lì processerò i messaggi quando aprirò Kmail, ma prima voglio che
siano separati (ho necessità di sapere da quali pop ricevo mail), il
problema che
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Alle 14:47, mercoledì 2 luglio 2003, Giuseppe Ferruzzi ha scritto:
N.B. Dovrai crearti a mano le rispettive sottodirectory prima
di fare le prove.
Questa è solo una indicazione che potrebbe anche non funzionare ;)
Comunque vedi eventualmente di
* Luigi Pinna wrote:
[EMAIL PROTECTED] lavoro]$ fetchmail --auth password
Option --remote is not supported with POP3
fetchmail: Query status=5 (SYNTAX)
fetchmail: Query status=5 (SYNTAX)
$ man fetchmail
..
...
EXIT CODES
To facilitate the use of fetchmail in shell scripts, an exit
code
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Alle 20:39, mercoledì 2 luglio 2003, syd ha scritto:
1) Posta il tuo/tuoi .fetchmailrc
2) Posta il tuo/tuoi .procmailrc
Li mando come allegati, però .fetchmailrc è ridotto da 5 account a 2
Spiega:
1) devi gestire piu' account per lo stesso
* Luigi Pinna ha scritto:
Fatto, ma il risultato che mi da è per me aramaico (il turco è più
semplice fidati...), ed è questo:
[EMAIL PROTECTED] lavoro]$ fetchmail --auth password
Option --remote is not supported with POP3
fetchmail: Query status=5 (SYNTAX)
fetchmail: Query status=5
Does anyone have a clue as to how to get ClamAV's milter to append a
message to each outbound email to state it's been scanned? (Egads...that
means my sig would be even bigger!)(g)
--
Wed Jul 2 17:40:20 EST 2003
17:40:20 up 7:01, 2 users, load average: 3.52, 0.93, 0.34
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Alle 03:15, martedì 1 luglio 2003, syd ha scritto:
In ogni caso nella parte iniziale del .procmailrc devi dichiarare
il percorso della MAILDIR che nel tuo caso sara'
/var/spool/mail/ferris.
Trovi tutto quello che ti serve ai link che ti ho
* Luigi Pinna ha scritto:
Il problema è che se non esiste l'utente ignore il
... is 'ferris' here
Se intendi, quando scarichi la posta con fetchmail, evitare che si
verifichi una perdita di posta per un problema di mancata consegna locale
puoi rimediare con le seguenti due righe in
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Alle 23:04, martedì 1 luglio 2003, Giuseppe Ferruzzi ha scritto:
Se intendi, quando scarichi la posta con fetchmail, evitare che si
verifichi una perdita di posta per un problema di mancata consegna
locale puoi rimediare con le seguenti due righe
Deve aver avuto molto sonno, perche' il domenica 29 giugno 2003, alle 13:56, Luigi
Pinna ha scritto:
funzionamento per me non ha senso. Ti consiglio dunque di leggere il
capitoletto: Procmail: mutt mette le ali dal manualetto La posta con
Mutt di Antonecchia. Per me e' stato illuminante.
* Luigi Pinna wrote:
Purtroppo non ho possibilità di recuperlo dato che non sono in Italia
adesso, certo che se fosse su internet...
http://www.telug.it/mutt-howto/index.html#SECTION0025
http://www.mrshark.it/qechowto/procmail.html
Come dicevo nell'altra mail, a me basta
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Allora torno alla carica...
Ho configurato fetchmail per scaricarmi la posta, ma non posso ancora
usarlo!
Infatti nella mia mandrake non ho trovato un procmailrc preconfezionato
per impostare i filtri!
A me basta che faccia questo lavoro:
pop
On Thursday 26 June 2003 17:26, Luigi Pinna wrote:
Il mio problema è quindi capire come dover configurare sendmail appunto,
uhmm, forse non ho capito io il problemama sendmail non serve ad inviare?
:)
in modo che faccia questo lavoro (scsricare la posta e cancellarla dal
web)
in Kmail
* Luigi Pinna wrote:
Ciao a tutti! A questo punto del discorso, mi permetto di chiedere una
divagazione.
Scherzi.. divagare e' bellissimo.. purifica lo spirito e il corpo :)
Io voglio continuare ad usare Kmail,
E mi sembra giusto. Io kmail lo usai un paio di mesi, circa due anni
fa pero'
Allora.. vediamo un po' cosa sono riuscito a tirare fuori dalla
documentazione di sendmail tenendo presende due cose fondamentali:
1) sendmail e' un pozzo senza fondo
2) le mie osservazioni sono inevitabilmente piene di lacune e vanno
considerate come semplici tracce da seguire.
Bene.
A partire
* syd ha scritto:
* Giuseppe Ferruzzi wrote:
Comunque sendmail purtroppo
ti serve come Delivery ed è necessario sempre anche se usi procmail.
In che senso Giuseppe? Io uso procmail senza nessun MTA (a parte
ssmtp per l'invio). Voglio dire.. procmail lo faccio funzionare
da solo.
Si
* Giuseppe Ferruzzi wrote:
In che senso Giuseppe? Io uso procmail senza nessun MTA (a parte
ssmtp per l'invio). Voglio dire.. procmail lo faccio funzionare
da solo.
Si hai ragione. Solo nel caso di fetchmail non mi viene scaricata la
posta dal server pop se disattivo sendmail.
Alle Saturday 07 June 2003 23:48, a proposito di Re: [newbie-it] sendmail
vaniliacacao (e chissa' a cosa pensava veramente), Giuseppe Ferruzzi ha
scritto:
* Arwan ha scritto:
...nel mio HD di esempi su sendmail non c'e' traccia... il readme spiega
come generarlo... cose che non ho nessuna
* Giuseppe Ferruzzi wrote:
Comunque sendmail purtroppo
ti serve come Delivery ed è necessario sempre anche se usi procmail.
In che senso Giuseppe? Io uso procmail senza nessun MTA (a parte
ssmtp per l'invio). Voglio dire.. procmail lo faccio funzionare
da solo.
--
syd
-
Slackware 9.0 *
* Arwan wrote:
Macchecavolo di vanillia! E' tutto il pomeriggio che lo cerco, ma nel mio HD
di esempi su sendmail non c'e' traccia. L'ho rovistato come un calzino; e il
readme spiega come generarlo... cose che non ho nessuna intenzione di fare.
Sul dove infilarlo lo so io... :-)
Syd,
Alle Thursday 29 May 2003 19:17, a proposito di Re: [newbie-it]
fetch+proc+mutt+MTA [era:All'attenzione..] (e chissa' a cosa pensava
veramente), syd ha scritto:
Parliamo quindi della tecnica del _taroccamento_ del file vanilla che
viene fornito dalla stessa versione di sendmail che
* Arwan ha scritto:
...nel mio HD di esempi su sendmail non c'e' traccia... il readme spiega
come generarlo... cose che non ho nessuna intenzione di fare.
Non c'è bisogno di configurare niente per far funzioanare sendmail
in locale. La configurazione serviva solo per il problema del contenuto
On Monday 13 Jan 2003 2:18 pm, Adolfo Bello wrote:
On Mon, 2003-01-13 at 10:04, Derek Jennings wrote:
Both Postfix and mailx have a command /usr/bin/sendmail This is to
provide compatibility with applications that assume sendmail is the
installed mail system. So you probably have postfix
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Alle 21:13, venerdì 6 dicembre 2002, Nicola ha scritto:
..ma per 4 account lascia fare il mua...
MUA
questa mi è nuova, per curiosità cosa indica?
***da Appunti di Informatica Libera
Per scrivere, inviare e leggere i messaggi di posta
Buon giorno alla Mailinglist. Vorrei segnalare a qualcuno, il mio problema:
da quando ho installato la Mandrake 9.0, non riesco ad usare lo scanner,
anche se, tuttavia, sembra che xsane lo abbia individuato. Si tratta di
un Flatbed-scanner ACER S2W 3300 U, ed e' collegato al computer tramite
una
Alle 21:57, giovedì 5 dicembre 2002, Nicola ha scritto:
Quello che vorrei ottenere è un demone che gira in background,
e che ogni volta che mi collego scarichi la posta di tutti gli
utenti, e invii quella in uscita. Non sapendone niente, avevo
pensato di usare fechmail e sendmail, ma non so
Alle 10:15, venerdì 6 dicembre 2002, [EMAIL PROTECTED] ha scritto:
Buon giorno alla Mailinglist. Vorrei segnalare a qualcuno, il mio problema:
da quando ho installato la Mandrake 9.0, non riesco ad usare lo scanner,
anche se, tuttavia, sembra che xsane lo abbia individuato. Si tratta di
un
..ma per 4 account lascia fare il mua...
MUA
questa mi è nuova, per curiosità cosa indica?
se proprio vuoi sendmail, ok,
ma sappi che dovrai essere collegato fino allo svuotamento della
coda,
che risente dei tempi dei vari dns..
Bè io avevo citato quei due perchè li avevo sentiti
Buon giorno a tutta la ML, ho deciso di fare un salto in avanti nel mondo di
linux, e configurare il mio pc come server di posta.
Quello che vorrei ottenere è un demone che gira in background, e che ogni
volta che mi collego scarichi la posta di tutti gli utenti, e invii quella in
uscita. Non
Alle 08:35, sabato 16 novembre 2002, gigi pinna ha scritto:
[...]BRpuoi farlo, ma devi accordarti con
l'amministratore di BRrete, perchè ti apra il
firewall.BRBRe` un ottima notizia! sai se ci posso
anche sparare limewire su quella porta?BRBRok, per
la tua macchina dovrà allora venire aperta
Alle 08:35, sabato 16 novembre 2002, gigi pinna ha scritto:
il messaggo scirà quotato male, causa copia e incolla da
html...!!
puoi farlo, ma devi accordarti con l'amministratore di
rete, perchè ti apra il firewall.
-e` un ottima notizia! sai se ci posso anche sparare
-limewire su quella
Alle 17:05, giovedì 14 novembre 2002, gigi pinna ha scritto:
attualmente dalla lan non uso niente, ma la lan ha il suo
gestore smtp; io voglio semplicemente sostituirmi a lui
per spedire la mia posta in modo che la stessa
configurazione la posso usare sui computer sparsi
geograficamente in
[...]>puoi farlo, ma devi accordarti con l'amministratore di >rete, perchè ti apra il firewall.e` un ottima notizia! sai se ci posso anche sparare limewire su quella porta?>ok, per la tua macchina dovrà allora venire aperta la 25:tcp>>c'è un però...>sendmail quando spedisce utilizza la risoluzione
Dunque, cominciamo dall'inizio. Sendmail non si può gestire tramite web.
O meglio, via web esistono tool del calibro di webmin, che servono
all'amministratore del server di posta, ma non certo ad un utente.
Per quanto riguarda la programmazione di sendmail per spedirti la posta,
devi compilare il
Alle 15:55, mercoledì 13 novembre 2002, gigi pinna ha
scritto:
...
Vorrei sapere come sarebbe
meglio configurare sendmail per spedirmi lui la mia posta
e senza dover impazzire tutte le volte se decido di
connettermi tramite un altro provider di continuo
per usare sendmail come standalone
>per usare sendmail come standalone devi solo aggiungere il
>tuo dominio locale nel campo Cw di /etc/mail/sendmail.cf
>
>[e riavviare il servizio]
>attualmente, per spedire, dalla lan, cosa usi?
>se hai un server già configurato, sicuramente la porta 25
>del FW sarà aperta *per* l'host che
Ciao a tutta la lista!
ho visto che in questi giorni si sta parlando parecchio di autenticazione by smtp.
Vorrei sapere come sarebbe meglio configurare sendmail per spedirmi lui la mia
posta e senza dover impazzire tutte le volte se decido di connettermi tramite un
altro provider di continuo
On Wed, 13 Feb 2002 11:09:46 +0200
Veysel Harun Sahin [EMAIL PROTECTED] studiouisly spake these words to
ponder:
Hello forum,
How can I restart sendmail when it is running? I have tried sendmail
restart but it says that restart... User unknown.
Thank you!
as root type this in a
On Thu, 10 Jan 2002 14:30:06 +0800
SKLIM [EMAIL PROTECTED] studiouisly spake these words to ponder:
Hi!
I have configure my sendmail with a source files. But there was a problem
running sendmail.
How can I remove sendmail program from my Linux BOX
Best Regards,
SKLIM
if you
SKLIM [EMAIL PROTECTED] studiouisly spake these words to ponder:
Hi!
I have configure my sendmail with a source files. But there was a problem
running sendmail.
How can I remove sendmail program from my Linux BOX
Best Regards,
SKLIM
try /etc/rc.d/init.d/sendmail stop
this will
OK ..thank for your information ... then how to remove sendmail files clean
in my Linux BOX
Best Regards,
SKLIM
- Original Message -
From: Gerald Waugh [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, January 11, 2002 9:40 AM
Subject: Re: [newbie] Remove Sendmail
SKLIM [EMAIL
of the Devil known
as Sendmail.
Cheers,
Miark
- Original Message -
From: Stanley Sze [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, December 14, 2001 7:04 PM
Subject: [newbie] RE: Sendmail - Enable Relay Control
Hi guys,
I am trying to stop spammers from sending junk
Hi guys,
I am trying to stop spammers from sending junk mails thru my server. The onlyfunctionI know isto use "Enable Relay Control," butI can only sendmails to internal accounts. Is there any methods that I can use to stop these spammers andhow? Thanks very much!
StanMSN Photos is the easiest
Hi!
I have some problem send an email to one's of my customer company email
address. My customer is using SingNet.com.sg services.
They are using a virtual-domain email account from SingNet. When I send
email to my customer with To: and Cc:
Only the To: user and the 1st Cc: user will received
ciao
qualcuno conosce un bel link di documentazione su sendmail
grazie a tutti quelli che risponderanno
ciao
fede
Greetings
He/she wanted they helped me to solve a problem.
As configuring sendmail so that another user apart from the root can send
email.
With the current configuration the following error is generated.
[Mail not sent: .0.0 Can't create transcript file./xff38Mkvd01313:
/ / _
---/ / (_)__ __ __
--/ /__/ / _ \/ // /\ \/ /
-//_/_//_/\_,_/ /_/\_\
Gshop Network Payment Solutions.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of De geografia
Congreso de Estudiantes
Sent: Tuesday, 10 April 2001 10:14 PM
To: [EMAIL PROTECTED]
Subject: [newbie] Config
Greetings
He/she wanted they helped me to solve a problem.
As configuring sendmail so that another user apart from the root can send
email.
With the current configuration the following error is generated.
[Mail not sent: .0.0 Can't create transcript file./xff38Mkvd01313:
On Monday 27 November 2000 09:19 am, you wrote:
I would like to just take to time to say thanks to all the people who have
helped me out. Especially Phil. Best Regards to everyone and again thanx.
Your Welcome!
--
Phil Connor
[EMAIL PROTECTED]
Registered Linux User # 189889
On Friday 24 November 2000 03:29 pm, you wrote:
P.s. the funny thing is whatever I put in th relay_allow file does not show
up anywhere in the webmin system even after restarting the sendmail system.
open webmin and go to sendmail look in the upper right corner of that page
and you should
Hi Phil
I have been playing with my sendmail some more and have figured out a way to get
it to send mail out via pop account. unfortunely I have to put in every domain I wish
to e-mail there. Its the /etc/mail/relay_allow file. Is there anyway I can have
myself and the users
I did this and I got this error message
The message could not be sent because one of the recipients was rejected by the
server. The rejected e-mail address was '[EMAIL PROTECTED]'. Subject 't', Account:
'cr705621-a.wlfdle1.on.wave.home.com', Server: 'cr705621-a.wlfdle1.on.wave.home.com',
No I got the same error but what I did notice was that in webmin in the following
sections I get these messages
Domain Routing
Your sendmail configuration file does not have the necessary directive for domain
routing.
Outgoing Addresses
Your sendmail configuration file does not have the
No I got the same error but what I did notice was that in webmin in the following
sections I get these messages
Domain Routing
Your sendmail configuration file does not have the necessary directive for domain
routing.
Outgoing Addresses
Your sendmail configuration file does not have the
relay domains I have nothing!
in local domains I have localhost, and my computer name!
in masquerading I have masquerade as domain my computer name.my domain. In domains to
be masquerading I have nothing
Please give me a hand!
On Friday 17 November 2000 12:28 am, you wrote:
I'm using
On Friday 17 November 2000 12:28 am, you wrote:
I'm using outlook express on a winblows machine from a remote location to
pick up. and no I have not set up masquerading
Your problem is going to be 1 of 3 places "relay" is incorrect, "local" shows
nothing besides "localhost" and or
I have sendmail working but I cant send mail out it give me an error
The message could not be sent because one of the recipients was rejected by the
server. The rejected e-mail address was '[EMAIL PROTECTED]'. Subject 'Hey Thanks
alot', Account: 'cr705621-a.wlfdle1.on.wave.home.com', Server:
actually my account is [EMAIL PROTECTED] ( till I have my
domain forwarded any way!)
my server is cr705621-a.wlfdle1.on.wave.home.com
I can send email to the accounts on the server and recieve then as well. But the
accounts can only send outgoing e-mail to the
I'm using outlook express on a winblows machine from a remote location to pick up.
and no I have not set up masquerading
On Thursday 16 November 2000 05:37 pm, you wrote:
I can recieve e-mail but not get any. Any help would be great.
What are you using for your e-mail and have you
EMAIL PROTECTED]
Sent: Friday, November 17, 2000 12:29 AM
To: Phil Connor
Cc: [EMAIL PROTECTED]
Subject: Re: [newbie] re sendmail simple question (I think :)
I'm using outlook express on a winblows machine from a remote location to pick up.
and no I have not set up masquerading
On Thursday 16 Nov
I have a mandrake 7.1 machine as follows
packard bell
cyrix 300+ 233mhz
144 megs ram
4.8 gig drive
13.1 gig drive
samba server
apache server
ipchains
2 nics (1 3com, 1 realtek)
s3 video card 4 megs ram
cable internet service (fixed IP)
I can send to one of the users on the server and
Dear 7.1 user:
after I send mail from console or from emacs text mode , receiver can
not reply,
mailer said: can not find
[EMAIL PROTECTED]
eric is my local user name on my linux machine, my email :
[EMAIL PROTECTED]/* suppose */
how
I seen to be having a problem with mail on my mandrake box. I just I have a
cable modem and since my ISP forces us to use DHCP so sendmail/postfix
only allows mail for that ip given to me and no other domains. How do I
configure my box to handle more domains off of DHCP machine. I can control
On Mon, 21 Aug 2000, Renaud OLGIATI wrote:
I have not been able to find wether KMail uses Sendmail to process the
incoming and outgoing mail; does anyone know ?
Only if you set it up. File - settings, NETWORK tab. Sending Mail: click
the "sendmail" button and it uses sendmail. Never was life
I have not been able to find wether KMail uses Sendmail to process the
incoming and outgoing mail; does anyone know ?
I would like to know if putting the domain names of persistent spammers
in /etc/hosts.deny will help when using KMail.
TIA,
Ron the Frog, on the sunny banks of the Paraguay
I just got one of those virtual servers hosted by
my ISP and want to setup my Linux box at home to be the "post office" for the
other PCs in the house.
Example: my domain at the virtual server ISP
hosted is: www.whatever.com (of course its
not the correct one.)
At home, I setup my
I'm Sorry for sending this question second time. My Mail Server (based on
NT) was crash and I unable to retrieve my previous mail.
How to make a Firewall using Mandrake 5.3 or 6.0?
a firewall with this features :
1. Intrusion Detection
2. User Authentication
3. Access Control
4. Mail Gateway
5.
Ok, here is the most easy way to set up fetch
send mail..
http://apps.freshmeat.net/homepage/916961998/
Download this perl script and it does it for you.
=)
-Bill
83 matches
Mail list logo